I NEED ASAPPP

How many moles of bromine gas would occupy a volume of 20 L at a pressure of .90 atm and a temperature of 90°C? Show all work.
R= 8.31 L kPa/K mol
1 atm=101.3kPa

Answer:

5

Explanation:

Answer: 112.5 mL

Explanation:

We can use the dilution formula to determine the initial volume of the 1.00 M KOH solution:

M1V1 = M2V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

Plugging in the given values, we get:

1.00 M x V1 = 0.250 M x 450 mL

Solving for V1, we get:

V1 = (0.250 M x 450 mL) / 1.00 M

V1 = 112.5 mL

When 1.00 mol of NH4NO3 reacts, 1.00 mol of NH4+ ions and 1.00 mol of NO3- ions are produced.

The balanced chemical equation for the reaction between NH4NO3 and water can be written as:

NH4NO3 + H2O → NH4+ + NO3- + H2O

This reaction involves the dissociation of NH4NO3 into NH4+ and NO3- ions when it is dissolved in water.

Since we are given 1.00 mol of NH4NO3, and assuming that it is completely dissociated in water, we can calculate the number of moles of each product that will be formed.

For every 1 mol of NH4NO3, 1 mol of NH4+ and 1 mol of NO3- ions are formed. Therefore, we can say that:

1.00 mol of NH4NO3 will form 1.00 mol of NH4+ ions

1.00 mol of NH4NO3 will form 1.00 mol of NO3- ions

Since the reaction involves the dissociation of NH4NO3 in water, the number of moles of water formed is not taken into account.

Learn more about reaction here:

https://brainly.com/question/17434463

#SPJ1

The enthalpy change for the reaction Mn(s) + O₂(g) → MnO₂(s) is +1563 kJ/mol

What is Enthalpy?

Enthalpy is a measure of the total heat energy in a thermodynamic system. It is represented by the symbol H and is typically measured in units of joules or calories. Enthalpy can be used to describe the amount of heat that is absorbed or released during a chemical reaction or a phase change in a substance. It is a useful concept in thermodynamics and is commonly used in chemical and physical processes.

To determine AH for Equation b, we can use Hess's Law which states that if a reaction is carried out in a series of steps, the sum of the enthalpy changes for the individual steps will be equal to the enthalpy change for the overall reaction.

First, we need to manipulate Equation a to obtain the same number of moles of MnO₂ as in Equation b.

4Al(s) + 3MnO₂(s) → 2Al₂O3(s) + 3Mn(s) (multiply by 2/3)

8/3 Al(s) + 2MnO₂(s) → 4/3 Al₂O3(s) + 2Mn(s)

Next, we can write the overall reaction as:

8/3 Al(s) + 2MnO₂(s) + 3/2 O₂(g) → 4/3 Al₂O3(s) + 2Mn(s) + O₂(g)

The enthalpy change for this reaction can be calculated by adding the enthalpy change of Equation a and the opposite of the enthalpy change of Equation b (because Equation b is the reverse of the reaction in Equation a):

AH = (-3352 kJ/mol) + (-(-1) * (-1789 kJ/mol))

AH = -3352 kJ/mol + 1789 kJ/mol

AH = -1563 kJ/mol

Learn more about Enthalpy from the given link

https://brainly.com/question/14047927

#SPJ1

It is important to note that lead poisoning is a serious condition that requires prompt medical attention. If you or someone you know has ingested lead nitrate, seek medical attention immediately.

What is Lead Nitrate?

Lead nitrate is an inorganic compound with the chemical formula Pb(NO3)2. It is a colorless, odorless, and crystalline solid that is highly soluble in water. Lead nitrate is commonly used in various industrial processes, including the manufacture of lead-based explosives, pigments, and pyrotechnics.

Swallowing soluble lead nitrate, Pb(NO3)2, can lead to lead poisoning, which can cause various health problems, including abdominal pain, vomiting, diarrhea, seizures, and in severe cases, coma or death. If someone has swallowed this compound, it is important to seek medical attention immediately.

Learn more about Lead Nitrate from the given link

https://brainly.com/question/23350987

#SPJ1

Answer:

Products will be Ga2Br2 and CaS3 (Double Displacement Reaction)

Assuming the acid used for titration is a strong acid (such as HCl), the balanced chemical equation for the reaction would be:

HCl + NaOH → NaCl + H2O

From the equation, we can see that 1 mole of HCl reacts with 1 mole of NaOH. Therefore, the number of moles of HCl used for titration can be calculated as:

moles of HCl = moles of NaOH = M x V x n

where M is the molarity of NaOH, V is the volume of NaOH used (100 mL or 0.1 L), and n is the number of moles of NaOH per liter of solution (1 mole/L).

moles of HCl = 0.15 M x 0.1 L x 1 mol/L = 0.015 mol

Since the volume of acid used for titration is 150 mL or 0.15 L, we can calculate the molarity of the acid as:

Molarity of acid = moles of acid / volume of acid used

Molarity of acid = 0.015 mol / 0.15 L = 0.1 M

Therefore, the molarity of the acid solution is 0.1 M.

The flow rate of fuel from the pump is 0.25 liters/second.

To find the flow rate of fuel from the pump, we need to determine the volume of fuel that is dispensed per unit of time.

75 liters = 0.075 cubic meters

Mass = volume x density

Mass = 0.075 cubic meters x 680 kg/cubic meter

Mass = 51 kg

we can convert the time it takes to fill the tank from minutes to seconds:

5 minutes = 300 seconds

Finally, we can calculate the flow rate of fuel from the pump:

Flow rate = mass/time

Flow rate = 51 kg / 300 seconds

Flow rate = 0.17 kg/second

Since we know the relative density of the fuel is 0.68, we can convert the flow rate from kilograms to liters:

Flow rate = mass/density

Flow rate = 0.17 kg / 0.68 kg/liter

Flow rate = 0.25 liters/second

The flow rate of fuel from the pump is 0.25 liters/second.

learn more about relative density here

https://brainly.com/question/29083188

#SPJ1

This reaction is endothermic because energy is absorbed during the reaction. This can be seen by looking at the change in the enthalpy of the reactants compared to the products.

Given the reaction is as follows: [tex][Co(H_2O)_6]_2(aq) + 4Cl^{-}(aq) < -- > [CoCl_4]_2^{-}(aq) + 6H_2O(l)[/tex]

The products have a higher enthalpy than the reactants, meaning that the reaction absorbs energy and is endothermic. This can also be determined by looking at the oxidation states of the elements involved. The oxidation state of the cobalt atom in[tex][Co(H_2O)_6]^{2+}[/tex] is +2, while the oxidation state of the cobalt atom in [tex][CoCl_4]^{2-[/tex] is +3. This indicates that the cobalt atom has been oxidized, which requires energy and makes the reaction endothermic.

To learn more about endothermic click here https://brainly.com/question/31214950

#SPJ1

To answer your question, we will need to utilize the given information and perform calculations using the provided terms, such as the IPA-cyclohexane mixture, countercurrent extraction unit, mass ratio, and ideal number of racks.

First, let's find the initial composition of the mixture:
- 40% IPA (isopropanol)
- 60% Cyclohexane

Now, using the given mass ratio of water to oil (5.25), we can calculate the amounts of water and oil in the feed. Since we don't have exact values for the amounts, let's assume there are 100 units of the mixture.

- Water: (5.25 * 100) / (5.25 + 1) ≈ 84.0 units
- Oil: 100 units

The countercurrent extraction unit uses water to extract the IPA from the mixture. The objective is to achieve a final raffinate containing 20% IPA.

To determine the ideal number of racks and the composition of the first extract, we would need the provided balance data figure, which is not available in the question. However, by following the steps below, you can determine the values using the balance data figure:

1. Locate the initial point on the balance data figure, corresponding to the 40% IPA composition in the mixture.
2. Draw a tie line connecting the initial point to the mass ratio line (5.25) on the figure.
3. Identify the intersection point of the tie line with the mass ratio line, which represents the composition of the first extract.
4. Calculate the number of ideal racks by drawing a series of tie lines and steps from the initial point towards the final raffinate point (20% IPA) on the balance data figure.

By following these steps and using the provided balance data figure, you can determine the ideal number of racks required for the countercurrent extraction unit and the composition of the first extract.

For more questions on: extraction

https://brainly.com/question/28976060

#SPJ11

An endothermic reaction is a chemical reaction that requires energy input to proceed, meaning the products have higher potential energy than the reactants.

Endothermic reactions absorb heat from the surroundings, resulting in a decrease in temperature. In endothermic reactions, the energy term in the enthalpy change equation is positive.

An example of an endothermic equation is the reaction between baking soda and citric acid to produce carbon dioxide gas, water, and sodium citrate:

NaHCO3 + H3C6H5O7 → Na3C6H5O7 + 3H2O + CO2

This reaction requires energy input in the form of heat to break the bonds between the reactants and initiate the reaction. The reaction absorbs heat from the surroundings, making it feel cool to the touch.

What do you understand by the endothermic reaction? describe in brief.

To know more about Endothermic reactions, visit:

https://brainly.com/question/23184814

#SPJ1

Answer:

C₅H₁₀.

Explanation:

To determine the molecular formula of the compound, we need to know the molar mass of the compound. Since the empirical formula is CH₂, the empirical molar mass can be calculated as:

Empirical molar mass = 12.01 g/mol (atomic mass of C) + 2(1.01 g/mol) (atomic mass of H)

Empirical molar mass = 14.03 g/mol

The molecular mass of the compound is given as 70.15 g/mol. To find the molecular formula, we need to know how many empirical units are present in the molecule. This can be calculated by dividing the molecular mass by the empirical molar mass:

Number of empirical units = Molecular mass / Empirical molar mass

Number of empirical units = 70.15 g/mol / 14.03 g/mol

Number of empirical units = 5

This means that there are 5 empirical units (CH₂) present in the molecular formula of the compound. Therefore, the molecular formula is:

Molecular formula = 5(CH₂) = C₅H₁₀

Thus, the molecular formula of the compound is C₅H₁₀.

One mole of carbon dioxide would require 84.01 grams of NaHCO₃.

It is discovered that the ratio of moles of CO₂ generated to moles of NaHCO₃ reacted is 1:2.

We can observe from this equation that 1 mole of NaHCO₃ results in 1 mole of CO₂. As a result, NaHCO₃ and CO₂ have a molar ratio of 1:1.

Na2CO₃(s) + H₂O(g) + CO₂ = 2 NaHCO₃(s)(g)

CO₂ has a molar mass of about 44.01 g/mol. As a result, we must determine how much NaHCO₃ weighs in relation to one mole of CO₂. Using the molar mass of NaHCO₃, the following can be calculated:

Molar mass of NaHCO₃ is 84.01 g/mol.

The mass of NaHCO₃ needed to create one mole of CO₂ is as follows:

(84.01 g NaHCO₃/1 mole NaHCO₃) = 84.01 g CO₂/mol for 1 mole of NaHCO₃.

To know more about moles  visit:

brainly.com/question/29130470

#SPJ1

Poaching tigers for their skins = overexploitation of resources, discharging sewage= water pollution, increasing the release of greenhouse gases = climate change.

The Earth's atmosphere contains molecules called greenhouse gases that hold heat in place and keep it from escaping into space. These gases, which also include water vapor, methane, and carbon dioxide, operate as a blanket over the globe to keep it warm and habitable.

Due to the pressure it places on the tigers' population, tiger poaching for its skin is an activity that results in overexploitation of resources. Animals can go extinct as a result of poaching, which is the illegal hunting and killing of animals. Tiger populations are decreased and their habitat is disturbed when they are poached for their skins.

Water pollution results from sewage discharge into water bodies. Water sources that have been contaminated by sewage, which contains dangerous germs and chemicals, are unsuitable for consumption by both people and wildlife. Moreover, this can cause eutrophication, which is the development of algae and other plant life in water bodies as a result of an overabundance of nutrients.

Climate change is caused by an increase in the emission of greenhouse gases like carbon dioxide and methane. The atmosphere of the Earth warms as a result of these gases trapping heat. This may have a number of harmful ecological repercussions, such as increased extreme weather occurrences, increasing sea levels, and the loss of habitat for numerous plant and animal species.

To know more about greenhouse gases, visit:

brainly.com/question/14131369

#SPJ1

the maximum amount of product that can be formed is 124.39 g SO₃, and there will be 36.8 g of excess O₂ left over.

To find the amount of excess reagent, you need to first determine which reactant is limiting and which is in excess.

Determine the limiting reagent:

Use stoichiometry to determine how much product can be formed from each reactant:

mol SO2:

2 SO₂ + O₂ -> 2 SO₃

2 mol SO₃/2 mol SO₂ = 1 mol SO₃/mol SO₂

1 mol SO₃ = 80.06 g SO₍₃₎

From 2.7 mol O₂

2 SO₂ + O₂ -> 2 SO₃

1 mol SO₃/1 mol O₂ = 1 mol SO₃/mol O₂

1 mol SO₃ = 80.06 g SO₃

2.7 mol O₂ x (1 mol SO₂/1 mol O₂) x (80.06 g SO₂/mol SO₂) = 216.45 g SO₂

Since the amount of SO₂ produced from 3.1 mol of SO₂ is less than the amount produced from 2.7 mol of O₂, SO₂ is the limiting reagent.

Calculate the amount of excess reagent:

To find the amount of excess O₂, use the balanced equation to determine how much O₂ is required to react with all of the SO₂:

2 SO₂ + O₂ -> 2 SO

3.1 mol SO2 x (1 mol O₂/2 mol SO2) = 1.55 mol O₂

Subtract the amount of O₂ used from the initial amount of O₂:

2.7 mol O₂ - 1.55 mol O2 = 1.15 mol O₂

Finally, convert the excess O₂ to mass:

1.15 mol O₂ x 32.00 g/mol = 36.8 g O₂

Learn more about stoichiometry here:

https://brainly.com/question/30215297

#SPJ1

Explanation:

We can use the ideal gas law to calculate the mass of the N2 gas sample:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant (0.08206 L·atm/mol·K), and T is the temperature.

First, we need to convert the temperature to Kelvin:

T = 50 °C + 273.15 = 323.15 K

Now we can rearrange the ideal gas law to solve for the number of moles:

n = PV/RT

n = (3 atm)(0.6 L)/(0.08206 L·atm/mol·K)(323.15 K)

n = 0.0705 mol

The molar mass of N2 is 28.02 g/mol, so we can calculate the mass of the N2 gas sample:

mass = n × molar mass

mass = 0.0705 mol × 28.02 g/mol

mass = 1.98 g

Therefore, the mass of the N2 gas sample is approximately 1.98 g.

Answer:

(a) Electrode reactions:

Pt/H+/H2: 2H+(aq) + 2e- -> H2(g) (reduction)

Ag/AgCl/Cl-: AgCl(s) + e- -> Ag(s) + Cl-(aq) (reduction)

Overall cell equation: 2AgCl(s) + H2(g) -> 2Ag(s) + 2HCl(aq)

(b) Direction of motion of ions and electrons:

In the Pt/H+/H2 half-cell, hydrogen ions (H+) move towards the platinum electrode and accept electrons to form hydrogen gas (H2). In the Ag/AgCl/Cl- half-cell, silver ions (Ag+) move towards the silver chloride (AgCl) electrode and accept electrons to form silver (Ag) metal while chloride ions (Cl-) move away from the electrode. Electrons move from the hydrogen electrode to the silver electrode through the external circuit.

(c) Electrode labeling:

The Pt/H+/H2 electrode is the cathode (-) and the Ag/AgCl/Cl- electrode is the anode (+).

(d) Standard cell potential (Eo):

The standard cell potential can be calculated using the standard reduction potentials for each half-cell:

Eo(cell) = Eo(reduction, Ag/AgCl/Cl-) - Eo(reduction, Pt/H+/H2)

Eo(reduction, Ag/AgCl/Cl-) = +0.222 V (from standard reduction potential tables)

Eo(reduction, Pt/H+/H2) = 0 V (by definition)

Eo(cell) = +0.222 V - 0 V = +0.222 V

(e) Actual cell potential (E):

E(cell) = Eo(cell) - (0.0592 V / n) * log[H3O+]

where n is the number of electrons transferred in the balanced equation (2 in this case)

E(cell) = +0.222 V - (0.0592 V / 2) * log(1.0 x 10^-4 M)

E(cell) = +0.222 V - (0.0296 V) = +0.1924 V

(f) Values of constants A and B:

E(cell) = A + B.pH

At pH 7 (neutral), E(cell) = Eo(cell) = +0.222 V

Therefore, A = +0.222 V and B = -0.0592 V/pH

substituting zirconium ions in the  [tex]MgO[/tex] lattice will create cation vacancies and increase the energy of the system. This will affect the stoichiometry and electrical properties of the material.

Substituting zirconium ions in the [tex]MgO[/tex] lattice will result in cation vacancies because the ionic radius of zirconium [tex](Zr4+)[/tex] is larger than that of magnesium [tex](Mg2+)[/tex].

The larger zirconium ions will not fit perfectly in the magnesium sites, and therefore some magnesium ions will need to move away from the lattice to accommodate the larger zirconium ions. This creates vacancies on the cation lattice.

The energy required to form a Schottky defect in [tex]MgO[/tex] is  [tex]6[/tex] eV, which is a measure of the stability of the crystal lattice.

The Schottky defect creates both cation and anion vacancies, and it is thermodynamically favorable at high temperatures, where the entropy of the system can offset the energy cost of the defect formation.

However, in the absence of entropy effects, the formation of cation vacancies due to zirconium substitution will increase the energy of the system. The increase in energy will depend on the concentration of cation vacancies and the extent of zirconium substitution.

Therefore, substituting zirconium ions in the [tex]MgO[/tex] lattice will create cation vacancies and increase the energy of the system. This will affect the stoichiometry and electrical properties of the material.

Learn more about cation here:

https://brainly.com/question/29663607

#SPJ9

The correct answer is The percent yield of a chemical reaction is a measure of the efficiency of the reaction. It is calculated by comparing the actual yield.

Which is the amount of product obtained in a reaction, to the theoretical yield, which is the amount of product that would be obtained if the reaction proceeded perfectly and no losses occurred. To calculate the percent yield in this case, we need to first determine the theoretical yield based on the amount of starting material used. The theoretical yield can be calculated using the balanced chemical equation and the stoichiometry of the reaction. Once the theoretical yield is determined, we can then use the formula for percent yield: Percent yield = (actual yield / theoretical yield) x 100% In this case, the chemist calculated a theoretical yield of 216.4 g based on the amounts of starting materials used. However, after isolating the purified product, she found that she only obtained 199.6 g of product. To calculate the percent yield, we can plug these values into the formula: Percent yield =[tex](199.6 g / 216.4 g) x 100% = 92.2%\\[/tex]Therefore, the percent yield for this reaction is 92.2%, which means that the reaction was quite efficient, but there were some losses or inefficiencies during the reaction or purification process. By calculating percent yield, chemists can evaluate the efficiency of a reaction and make adjustments to improve the process in future experiments.

To learn more about actual yield. click on the link below:

brainly.com/question/21925098

#SPJ1

CH2, N2O3 are covalent

NH4ClO, Fe3(PO4)2 and CrBr2 are ionic

Ionic compounds are formed when a metal atom donates one or more electrons to a nonmetal atom. This transfer of electrons creates ions, which are charged particles that attract each other due to their opposite charges.

Covalent compounds, on the other hand, are formed when two or more nonmetal atoms share electrons. In this type of bonding, each atom contributes one or more electrons to a shared pair, creating a covalent bond.

Learn more about ionic compound:https://brainly.com/question/3222171

#SPJ1

The dependent variable in this experiment would be the height of the explosion.

What is Soda?

Soda, also known as carbonated beverage or fizzy drink, is a drink that contains carbon dioxide gas dissolved in water, along with other ingredients such as sweeteners, flavors, and preservatives. The carbon dioxide gas is responsible for the characteristic fizz or bubbles that soda is known for.

In an experiment, the dependent variable is the variable that is being measured or observed and is expected to change in response to the independent variable. In this experiment, the independent variable is the type of soda used, while the dependent variable is the height of the explosion. The height of the explosion is what the experimenters will measure and observe to determine the effect of the independent variable (type of soda) on the outcome (height of explosion). Therefore, the height of the explosion is the dependent variable in this experiment.

Learn more about Soda from given link

https://brainly.com/question/28624529

#SPJ1

The ΔS° value for the reaction KCl(s) → K+(aq) + Cl−(aq) is ΔS° > 0, as the products have a higher degree of disorder than the reactant due to an increase in the number of particles in solution. Hence the correct option is (C) ΔS° > 0.

The ΔS° value for a reaction represents the change in the entropy of the system, which is a measure of the disorder or randomness of the system. The reaction KCl(s) → K+(aq) + Cl−(aq) involves a solid compound breaking down into two separate aqueous ions, which means that the products have a higher degree of disorder than the reactant. This increase in the number of particles in solution results in an increase in entropy, which means that ΔS° > 0. Option (A) is incorrect because the reaction involves a change in state, which results in an increase in entropy. Option (B) is incorrect because it represents the relationship between enthalpy and entropy, not the ΔS° value for this particular reaction. Option (D) is incorrect because the reaction results in an increase in entropy, not a decrease. Option (E) is incorrect because the given information is sufficient to predict the sign of ΔS°.

To know more about reaction please refer: https://brainly.com/question/28984750

#SPJ1

Answer:

PV=(n

total

​

)RT

(1)(V)=(0.3+0.2)(0.0821)(400)=(0.5)(400)(0.0821)=2×(8.21)=16.4litres

Answer:

Explanation:

Gather materials: clear glue, water, borax, food coloring, measuring cups and spoons, mixing bowl, and stirring utensil.

Create two batches of slime, keeping all variables constant except for the amount of borax used. In one batch, use 1 tablespoon of borax, and in the other batch, use 2 tablespoons of borax.

Mix the ingredients together in separate bowls until they reach the desired consistency.

Compare the consistency of the two slimes.

Data:

Qualitative data: Observations about the texture, color, and smell of the two batches of slime.

Quantitative data: Measurements of the amount of borax used in each batch and any other measurements deemed important for analyzing the consistency of the slime.

Independent variable: The amount of borax used in the slime recipe.

Dependent variable: The consistency of the slime.

Problem Question: What is the effect of varying the amount of borax solution on the consistency of slime?

Hypothesis: If the amount of borax solution in the slime mixture is increased, then the consistency of the slime will become firmer.

Experiment Steps:

In this experiment, the independent variable is the amount of borax solution, as it is being varied to test its effect on the slime's consistency. The responding variable is the consistency of the slime, which is being observed and recorded as the dependent variable.

Learn more about borax solution at:

https://brainly.com/question/14724418

#SPJ2

There is no reason to run these solutes at the 20 MWCO because they are both much smaller than the MWCO of the membrane.

The MWCO (molecular weight cut off) is the molecular weight of a solute at which it will be retained by a membrane during a process such as ultrafiltration or dialysis. If a solute has a molecular weight higher than the MWCO of a membrane, it will be retained and not pass through the membrane. If the molecular weight of a solute is lower than the MWCO, it will pass through the membrane.

In this case, glucose has a molecular weight of 180 g/mol (6 carbons x 12 g/mol per carbon + 6 oxygens x 16 g/mol per oxygen) and albumin has a molecular weight of approximately 81,942 g/mol (607 amino acids x 135 g/mol per amino acid). Both of these solutes have molecular weights that are much lower than 20,000 g/mol, which is a typical MWCO for ultrafiltration or dialysis membranes.

They would both easily pass through the membrane and be lost during the process. Instead, a membrane with a much lower MWCO would be needed if we wanted to retain these solutes during a process such as ultrafiltration or dialysis.

Learn more about glucose here:

https://brainly.com/question/2396657

#SPJ1

The correct answer is To find the pOH of a solution with an OH- ion concentration of 6.0e-4, we first need to use the relationship between pH and pOH:

pH + pOH = 14 Rearranging this equation, we get: pOH = 14 - pHWe can then use the relationship between pH and [H+] to find pH: pH = -log[H+] In this case, we are given the concentration of OH-, but we can use the relationship between [H+] and [OH-]: Kw = [H+][OH-] = 1.0e-14 Solving for [H+], we get: [H+] = Kw/[OH-] = 1.0e-14/6.0e-4 = 1.67e-11 M Substituting this into the equation for pH, we get: pH = -log(1.67e-11) = 10.78 Finally, we can use the first equation to find pOH: pOH = 14 - pH = 14 - 10.78 = 3.22Therefore, the pOH of a solution with an OH- ion concentration of 6.0e-4 is approximately 3.22.v.

To learn more about relationship click on the link below:

brainly.com/question/31248849

#SPJ1

There are 0.0125 moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃.

To determine how many moles of Al₂(SO₄)₃ are present in 50.0 mL of 0.250 M Al₂(SO₄)₃, we can use the following formula:

moles = concentration x volume

where concentration is in units of moles per liter (M), and volume is in units of liters (L).

First, we need to convert the volume from milliliters (mL) to liters (L):

50.0 mL = 50.0/1000 L = 0.0500 L

Next, we can plug in the values we know:

moles = 0.250 M x 0.0500 L

moles = 0.0125 mol

Therefore, there are 0.0125 moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃.

Moles are a unit of measurement that is usually used in chemistry to express the quantity of a substance. As many atoms, molecules, or ions are present in 12 grams of pure carbon-12, it is the volume of a substance that includes that many of them.

Avogadro's number,  6.022 x 10²³ particles per mole, is the number of particles.

learn more about moles here

https://brainly.com/question/15356425

#SPJ1

Answer:

To solve the problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P1V1) / T1 = (P2V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively. We are given P1 = 750 mmHg, V1 = 1.27 L, T1 = 298 K, V2 = 0.75 L, T2 = 448 K, and the amount of gas does not change.

First, we can solve for P2 by rearranging the equation as:

P2 = (P1V1T2) / (V2T1)

Substituting the values we get:

P2 = (750 mmHg x 1.27 L x 448 K) / (0.75 L x 298 K)

P2 = 1504 mmHg

Therefore, the final pressure at a volume of 0.75 L and a temperature of 448 K is 1504 mmHg.

The ideal gas law, also called the general gas equation, is the equation of state of a hypothetical ideal gas. It is a good approximation of the behavior of many gases under many conditions,then the answer is that 0.0025 moles of oxygen gas were created by your process.

When pressure and temperature are the same, the amount of oxygen gas created by your reaction will be 0.0025 moles.

In accordance with the equation for a balanced chemical reaction, hydrogen peroxide, or H₂O₂, breaks down to produce water and oxygen gas.

2H2O2(aq)→2H2O(l)+O2(g)

You have all the data necessary to solve for the amount of moles of oxygen gas created using the ideal gas law equation because you have collected 0.061 L of oxygen gas at 295.15 K and 1 atm.

PV=nRT n=PVRT nO₂=1atm * 0.061L / (0.082 (L * atm / mol * K)) =0.0025 moles

Hence, if this was your initial inquiry, then the answer is that 0.0025 moles of oxygen gas were created by your process.

learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ1