The dominant species in solution at the equivalence point of a weak base-strong acid titration is neutral salt. The correct answer is option 5.
A salt is a compound formed from the combination of an acid and a base. The acid and base neutralize each other, resulting in the formation of a neutral salt. The salt's pH will be determined by the strength of the acid and base that made it.A neutral salt is formed when the acid and base are strong or when they are of equal strength.
If the acid is strong and the base is weak, the salt will be acidic, and if the base is strong and the acid is weak, the salt will be basic. At the equivalence point of a weak base-strong acid titration, the dominant species in solution is a neutral salt.
At the endpoint, the pH of the solution will be less than 7 because the acid has been added to the solution. However, at the equivalence point, the acid and base have completely reacted to form a neutral salt, which is neither acidic nor basic. The correct answer is option 5.
To know more about titration refer to-
brainly.com/question/2728613#
#SPJ11
Which phrase describes a situation in which all the forces are balanced
Answer:
The phrase that describes a situation in which all the forces are balanced is "equilibrium"
use dimensional analysis and solve for: how many grams of Argon (Ar) are present in 2.35 x 1024 atoms of argon?
We can use dimensional analysis to solve this problem. First, we need to find the molar mass of argon from the periodic table, which is approximately 39.95 g/mol.
Next, we can set up a conversion factor using Avogadro's number, which is 6.022 x 10^23 atoms/mol.
1 mol Ar = 6.022 x 10^23 atoms Ar
From this conversion factor, we can derive another conversion factor:
1 atom Ar = 1 mol Ar/6.022 x 10^23 atoms Ar
Now we can use these conversion factors to convert atoms of argon to grams of argon:
2.35 x 10^24 atoms Ar * (1 mol Ar/6.022 x 10^23 atoms Ar) * (39.95 g Ar/1 mol Ar)
= 9.39 x 10^2 g Ar
Therefore, there are approximately 939 grams of argon present in 2.35 x 10^24 atoms of argon.
a sample of nitrogen gas expands in volume from 1.4 to 5.3 l at constant temperature. calculate the work done in joules if the gas expands
The work done by the gas during the expansion is 496 J.
Assuming that the nitrogen gas behaves ideally, the work done during the expansion can be calculated using the following equation:
W = -PΔV
where W is the work done, P is the pressure of the gas, and ΔV is the change in volume of the gas. Since the temperature is constant, the pressure of the gas can be assumed to be constant as well. Therefore, we can simplify the equation to:
W = -P(Vf - Vi)
where Vi is the initial volume of the gas and Vf is the final volume of the gas.
Substituting the given values, we get:
W = -(1 atm) (5.3 L - 1.4 L) = -4.9 L atm
To convert L atm to joules, we need to use the conversion factor 101.3 J/L atm:
W = -4.9 L atm × 101.3 J/L atm = -496 J
Since the work done is negative, this means that the gas is doing work on its surroundings, which is consistent with the fact that the gas is expanding.
Find out more about work done
brainly.com/question/9252627
#SPJ4
a flask contains 2.838 m formic acid and 1.913 m formate anion. these two chemicals are a conjugate acid/base pair that should be able to form a buffer. if formic acid has a 298 k value for ka of 1.85x10-4, what is the ph of the solution in this flask?
The pH of the buffer solution given in the flask containing 2.838 m formic acid and 1.913 m Formate anion is 3.56.
The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
where pKa is the acid dissociation constant of formic acid (HCOOH) which is 1.85x10⁻⁴ at 298 K1, [A⁻] is the concentration of Formate anion (HCOO⁻) and [HA] is the concentration of formic acid (HCOOH).
The molarity of formic acid in the flask is 2.838 M and that of Formate anion is 1.913 M.
Since these two chemicals are a conjugate acid/base pair that should be able to form a buffer, we can assume that all of the formic acid will dissociate into H⁺ and HCOO⁻ ions.
Therefore,
[HCOO⁻] = 1.913 M and
[H⁺] = 1.85x10⁻⁴ × 2.838 / 1.913
= 2.75 x 10⁻⁴ M.
Taking -log[H⁺] gives us pH:
= -log(2.75 x 10⁻⁴) = 3.56.
Therefore, the pH of the solution in this flask is 3.56.
To know more about a buffer solution, refer:
https://brainly.com/question/27371101
#SPJ4
what volume of hcl gas is produced by the reaction of 2.4 liters of h2 gas with 1.5 liters of cl2 gas? (volumes are at the same t and p.)
Answer:
The balanced equation for the reaction is:
H2(g) + Cl2(g) → 2HCl(g)
According to the equation, 1 mole of H2 reacts with 1 mole of Cl2 to produce 2 moles of HCl. So, the number of moles of HCl produced in the reaction is twice the number of moles of either H2 or Cl2 consumed.
To find the number of moles of H2 and Cl2 consumed, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming the temperature and pressure are constant, we can rearrange the ideal gas law to solve for n:
n = PV/RT
Using the given volumes, we can calculate the number of moles of H2 and Cl2:
n(H2) = (2.4 L) / (22.4 L/mol) = 0.107 mol
n(Cl2) = (1.5 L) / (22.4 L/mol) = 0.067 mol
Since the reaction consumes H2 and Cl2 in a 1:1 ratio, the limiting reactant is Cl2, which means that all of the H2 will react and all of the Cl2 will be consumed.
So, the number of moles of HCl produced is:
n(HCl) = 2 × n(Cl2) = 2 × 0.067 mol = 0.134 mol
To find the volume of the HCl gas produced, we can use the ideal gas law again:
V = nRT/P
Assuming the temperature and pressure remain constant, we can solve for V:
V = n(HCl) × R × T / P
Substituting the values and solving, we get:
V = (0.134 mol) × (0.0821 L·atm/mol·K) × (298 K) / (1 atm) = 3.30 L
Therefore, the volume of HCl gas produced is 3.30 liters.
The reaction between 2.4 litres of H2 gas and 1.5 litres of Cl2 gas (volumes at the same T and P) results in the production of 3 litres of HCl gas.
Avogadro's law states that all gases at the same temperature, pressure, and volume contain the same number of particles (or molecules), regardless of their chemical nature or physical properties. According to the balanced chemical equation given below, 1 mol H2 reacts with 1 mol Cl2 to produce 2 mol HCl.H2 (g) + Cl2 (g) → 2HCl (g) Let us calculate the moles of H2 and Cl2 gas in the given equation. n (H2) = 2.4 L × (1 mol/22.4 L) = 0.107 mol n(Cl2) = 1.5 L × (1 mol/22.4 L) = 0.067 mol From the chemical equation above, we know that the H2 and Cl2 gases react in a 1:1 ratio, which means that 0.067 mol of Cl2 gas can react with 0.067 mol of H2 gas. So, according to Avogadro's Law, we know that when 1 mol of H2 gas combines with 1 mol of Cl2 gas, 1 mol of HCl gas is created. 0.067 mol of H2 gas will therefore result in 0.067 mol of HCl gas. Since 1 mole of any gas at STP occupies 22.4 L of volume, then 0.067 mol of HCl gas will occupy 0.067 mol × 22.4 L/mol = 1.50 L of volume. Hence, 1.50 L of HCl gas is created when 2.4 L of H2 gas reacts with 1.5 L of Cl2 gas (volumes at the same T and P).
To know more about HCl click here:
brainly.com/question/28303188
#SPJ11
100 points
What is a limitation of the Arrhenius model of acids and bases?
All bases produce hydroxide ions when dissolved in water.
All bases and acids form water and hydroxide ions when dissolved.
All acids donate hydrogen ions to bases that accept hydrogen ions.
All acids and bases form conjugates when dissolved in water.
The Arrhenius model of acids and bases is limited in that it only considers substances that produce hydrogen ions (acids) or hydroxide ions (bases) when dissolved in water. This model does not account for the behavior of substances that do not produce these ions when dissolved in water, such as ammonia (NH3) or hydrogen fluoride (HF).
Therefore, the limitation of the Arrhenius model is that it cannot explain the basicity of ammonia or the acidity of hydrogen fluoride, which do not produce hydroxide or hydrogen ions, respectively, when dissolved in water.
So, the correct option is:
B).All bases and acids form water and hydroxide ions when dissolved.correct option is not listed
A limitation of the Arrhenius model of acids and bases is that it only considers substances that produce hydrogen or hydroxide ions in aqueous solutions as acids or bases, respectively¹. The Arrhenius theory is limited in that it can only describe acid-base chemistry in aqueous solutions. Similar reactions can also occur in non-aqueous solvents, however, as well as between molecules in the gas phase³. Arrhenius could not explain why certain compounds do not contain hydroxide ions, despite displaying basic properties. For example, metal oxides and metal carbonates².
if we wanted to improve our set-up, we could have added a desiccant between two cotton plugs. why is this much better than adding drying agents such as na2so4 directly into the solution?
Using a desiccant between two cotton plugs is better than adding drying agents directly into the solution because it helps to remove moisture from the air and avoids the risk of uneven distribution and contamination.
A desiccant is a material that absorbs moisture from the air, and it can be placed between two cotton plugs to help remove any remaining moisture in a solution. This can be more effective than adding drying agents, such as Na₂SO₄, directly into the solution because the desiccant can remove moisture from the air as well as the solution.
When drying agents are added directly to a solution, they may not be evenly distributed, which can lead to localized areas of high concentration that can affect the purity of the solution. Additionally, if the drying agent is not properly filtered out, it can contaminate the solution.
To know more about drying agent, here
brainly.com/question/2650481
#SPJ4
what is the ph of a buffer solution that is 0.211 m in hypochlorous acid (hclo) and 0.111 m in sodium hypochlorite? the ka of hypochlorous acid is 3.8
The pH of the solution calculated is 7.14. This is calculated using the Henderson-Hassel Bach equation.
A buffer solution is defined as a solution which can resist the pH change when the addition of an acidic or basic components to the solution. Buffer solution is able to neutralizing the small amounts of added acid or base to the solution by maintaining the pH of the solution relatively stable. This solution is formed by a weak acid that is hypochlorous acid and its conjugate base that is hypochlorite which is coming from sodium hypochlorite.
To calculate the pH of the solution we can use the Henderson-Hassel Bach equation.
pH = pKa + Log [base]/[acid]
pH = - Log 3.8 × 10⁻⁸ + log 0.111 / 0.211
pH = 7.14
To learn more about Henderson-Hassel Bach equation.
https://brainly.com/question/29735541
#SPJ4
select all products obtained when 3,3,6-trimethylcyclohexene is treated with nbs and irradiated with uv light.
When 3,3,6-trimethylcyclohexene is treated with NBS and irradiated with UV light, all the products obtained are given below:Br2 → NBS and hν → BrNSBS = N-bromosuccinimide1-bromo-3,3,6-trimethylcyclohexene → Cyclohexene molecule (elimination of HBr) + HBr → 3,3,6-trimethylcyclohexene
To produce a cyclic bromide, the addition of NBS to 3,3,6-trimethylcyclohexene is required. Bromine is unable to add to an alkene in a syn way.
Addition would be anti if NBS was used. The result is a cyclic bromide as a result of the bromination.
N-bromosuccinimide (NBS) is used to brominate alkenes at room temperature instead of molecular bromine. Instead of bromine, NBS is used to brominate alkenes because it has a high affinity for bromine, allowing it to deliver it to the alkene without having to add a catalyst.
The main reaction between 3,3,6-trimethylcyclohexene and NBS under UV light is 1-bromo-3,3,6-trimethylcyclohexene plus HBr.
The reaction is performed in the presence of ultraviolet light. The reaction takes place in the presence of a radical initiator (UV light). As a result, 3,3,6-trimethylcyclohexene is changed into 1-bromo-3,3,6-trimethylcyclohexene plus HBr (hydrogen bromide).
Therefore, the products obtained when 3,3,6-trimethylcyclohexene is treated with NBS and irradiated with UV light are 1-bromo-3,3,6-trimethylcyclohexene and HBr.
To know more about bromination refer to-
brainly.com/question/28938775#
#SPJ11
when an acid reacts with a metal like al, the products are . group of answer choices water and a salt water and a base a salt and carbon dioxide a salt and hydrogen water and carbon dioxide
When an acid reacts with a metal like Al (aluminum), the products formed are a salt and hydrogen gas.
The reaction can be represented by the following chemical equation:
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
In this equation, HCl represents hydrochloric acid, Al represents aluminum, AlCl3 represents aluminum chloride, and H2 represents hydrogen gas.
The reaction between an acid and a metal produces salt and hydrogen gas, but not water and salt, water and a base, a salt and carbon dioxide, or water and carbon dioxide.
For more such questions on Acid reactions
https://brainly.com/question/15334816
#SPJ11
find the pH of a solution whose H3O is equals 9.5 times 10 to the negative 8 power
The pH of the solution is 7.02.
pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm (base 10) of the concentration of hydronium ions (H3O+) in a solution. The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral, a pH below 7 is acidic, and a pH above 7 is basic.
In this case, the given concentration of H3O+ is 9.5 x 10^-8 M. To find the pH of the solution, we can use the formula:
pH = -log[H3O+]
Substituting the given value of [H3O+]:
pH = -log(9.5 x 10^-8) = 7.022.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ1
A container has .25 moles of CO, 1.25 moles of NH 3 , and .75 moles Kr. If the pressure of Carbon
Monoxide is 440 torr, what is the total pressure and the pressure of the other two gasses?
The partial pressures of NH3 and Kr are 244.44 torr and 147.73 torr, respectively.
Steps
We can use the ideal gas law to solve this problem, which states:
PV = nRT
we need to find the total number of moles of gas in the container:
Total moles = 0.25 moles CO + 1.25 moles NH3 + 0.75 moles Kr
Total moles = 2.25 moles
Next, we can use the ideal gas law to find the total pressure:
PtotalV = ntotalRT
Ptotal = ntotalRT/V
Ptotal = PCO + PNH3 + PKr
PNH3/Ptotal = nNH3/ntotal
PKr/Ptotal = nKr/ntotal
Substituting the given values:
PCO = 440 torr
ntotal = 2.25 moles
nNH3 = 1.25 moles
nKr = 0.75 moles
PNH3/Ptotal = 1.25/2.25 = 0.5556
PKr/Ptotal = 0.75/2.25 = 0.3333
Now we can solve for the partial pressures:
PNH3 = 0.5556 x Ptotal
PNH3 = 0.5556 x Ptotal = 0.5556 x (440 torr + PN2 + PKr)
PNH3 = 244.44 torr
PKr = 0.3333 x Ptotal
PKr = 0.3333 x Ptotal = 0.3333 x (440 torr + PN2 + PNH3)
PKr = 147.73 torr
So the total pressure is:
Ptotal = PCO + PNH3 + PKr
Ptotal = 440 torr + 244.44 torr + 147.73 torr
Ptotal = 832.17 torr
And the partial pressures of NH3 and Kr are 244.44 torr and 147.73 torr, respectively.
learn more about pressure here
https://brainly.com/question/28012687
#SPJ1
once a metal ion has become fully hydrated to become a metal hydrate, the resulting complex can exhibit behavior that is characteristic of a
Water molecules hydrate or "solvate" metal ions in aqueous solutions. This main sphere of hydration typically consists of six water molecules. The hydrated metal ion undergoes a stepwise hydrolysis in which it donates an H ion, acting as a weak acid. The correct option is B.
In an aqueous solution, metal ions are hydrated, which means that a protective shell of typically four or six water molecules surrounds them. A complex ion (or, simply, complex) is a type of ion that is created when a core metal ion joins forces with one or more surrounding ligands, molecules, or ions that each possesses at least one lone pair of electrons.
Lewis acid-base interaction causes a metal ion and ligand to combine to form a complex ion. The ligand, which has one or more lone pairs of electrons, functions as a Lewis base, while the positively charged metal ion functions as a Lewis acid.
Thus the correct option is B.
To know more about metal ions, visit;
https://brainly.com/question/2458752
#SPJ12
Your question is incomplete, but most probably your full question was,
once a metal ion has become fully hydrated to become a metal hydrate, the resulting complex can exhibit behavior that is characteristic of a
A. Strong acid
B. Weak acid
C. Strong base
D. Weak base
Match them for me please!
Change in shape is physical change. Transformation of one substance to another is Chemical change. Evidence of a chemical change is precipitation.
What is precipitation ?Precipitation in an aqueous solution is the process of converting a dissolved material into an insoluble solid from a supersaturated solution. The precipitate is the substance that forms. In the instance of an inorganic chemical reaction that results in precipitation, the chemical reagent that causes the solid to form is referred to as the precipitant.
The transparent liquid that remains above the precipitated or centrifuged solid phase is also known as the "supernate" or "supernatant."
When solid impurities segregate from a solid phase, the concept of precipitation can be expanded to other areas of chemistry (organic chemistry and biochemistry) and even applied to solid phases (e.g., metallurgy and alloys).
To know more about precipitation , visit;
https://brainly.com/question/29762381
#SPJ1
An ion has 19 protons, 20
neutrons, and 18 electrons. What
is the correct isotope notation?
A. 39K+1
19
B. 39Ca-¹
19
D. 19 Ca+¹
39
C. 18K+1
Enter the answer choice letter.
Enter
The isotopic representation for a potassium ion which has 19 protons, 20 neutrons, and 18 electrons is shown as ³⁹₁₉K⁺¹. Option A is the correct answer according to the question.
What is an isotope?An isotope is a variant of an element that has the same number of protons in the nucleus but a different number of neutrons. This means that isotopes of the same element have the same atomic number (number of protons) but different atomic masses (sum of protons and neutrons).
Isotopes can be either stable or unstable (radioactive), and the number of neutrons in an isotope affects its stability and other properties, such as its nuclear binding energy and decay rate. Many isotopes are used in scientific research, medicine, and industry, including in radiometric dating, nuclear energy, and medical imaging.
The potassium in the question given has a positive charge and thus has lost one electron. Therefore the proton is one number higher than the electrons. Neutral potassium has 19 electrons and ionic form has 18.
Learn more about isotopes here:
https://brainly.com/question/27475737
#SPJ1
predict how changing the partial pressure of carbon dioxide will affect the ph and concentration of bicarbonate ions in the plasma
The concentration of bicarbonate ions in the plasma is dependent on the partial pressure of carbon dioxide (pCO2) according to the below equilibrium reaction and a mechanism that helps regulate the acid-base balance of the body.
The equation is CO2 + H2O ⇌ H2CO3 ⇌ HCO3- + H+
This reaction is catalyzed by the enzyme carbonic anhydrase, which is present in red blood cells. An increase in pCO2 will shift the equilibrium to the right, increasing the concentration of carbonic acid (H2CO3), which will increase the concentration of bicarbonate ions (HCO3-) and hydrogen ions (H+) in order to maintain the equilibrium.
As hydrogen ions increase, the pH of the plasma will decrease. Therefore, an increase in pCO2 will lead to a decrease in pH and an increase in the concentration of bicarbonate ions in the plasma. Conversely, a decrease in pCO2 will shift the equilibrium to the left, decreasing the concentration of bicarbonate ions and increasing the pH of the plasma.
Learn more about Carbon dioxide here:
https://brainly.com/question/3049557
#SPJ4
a particular atom has a charge of -3.2 x 10^-19 c. how many electrons has it gained or lost as compared to its neutral state? remember that the charge on each electron is -1.6 x 10^-19 c.
the atom gained 2 electrons to become negatively charged.
The neutral state of an atom is the state in which the atom has an equal number of protons and electrons. Protons are positively charged particles found in the nucleus of an atom, while electrons are negatively charged particles that orbit the nucleus in shells or energy levels.
In a neutral atom, the number of positive charges (protons) is equal to the number of negative charges (electrons), resulting in a net charge of zero. This means that the atom is neither positively nor negatively charged.
Most elements in their natural state are neutral, and they only gain or lose electrons to become ions when they interact with other atoms or molecules.
If an atom has a charge of -3.2 x [tex]10^{-19} C[/tex], then it has gained 2 electrons compared to its neutral state.
This is because the charge on each electron is -1.6 x [tex]10^{-19} C[/tex], so dividing the overall charge by the charge on each electron gives:
-3.2 x [tex]10^{-19}[/tex] C / (-1.6 x [tex]10^{-19}[/tex] C/electron) = 2 electrons gained
Therefore, the atom gained 2 electrons to become negatively charged.
To know more about atom go through:-
https://brainly.com/question/17545314
#SPJ4
are the bonds in each of the following substances ionic, nonpolar covalent, or polar covalent? select the single best answer for each substance.
The bonds in each of the following substances are Ionic bond ,Polar covalent bond , Nonpolar covalent bond.
NaCl: Ionic bond. In this substance, sodium (Na) loses one electron to form a positively charged ion (Na+), while chlorine (Cl) gains one electron to form a negatively charged ion (Cl-). The oppositely charged ions attract each other, forming an ionic bond.
[tex]H_{2} O[/tex]: Polar covalent bond. Oxygen (O) is more electronegative than hydrogen (H), meaning it has a greater ability to attract electrons. As a result, the electrons are shared unevenly between O and H, creating a partial negative charge on O and a partial positive charge on H.
[tex]CH_{4}[/tex]: Nonpolar covalent bond. Carbon (C) and hydrogen (H) have similar electronegativities, so the electrons are shared evenly between the atoms. This results in a nonpolar covalent bond, where there is no significant charge separation.
Know more about bonds here :
brainly.com/question/26712131
#SPJ11
how does the 1hh nmr support he proposed structure based on chemicall shiftt assignmens and j values (coupling constants) of the aromaic hydrogen vanillin g
The 1H NMR spectrum supports vanillin's proposed structure through consistent chemical shift assignments and coupling constants of the aromatic hydrogen atoms.
1H NMR spectroscopy can uphold the proposed design of vanillin by giving data on the substance shift tasks and coupling constants of the fragrant hydrogen molecules. On account of vanillin, the normal compound shift of the fragrant hydrogen iotas is between 6.5-8.5 ppm, which is predictable with the noticed signs in the NMR range. The coupling constants between the sweet-smelling hydrogens can likewise be utilized to help the proposed structure, as they can give data on the replacement example of the fragrant ring.
In vanillin, the coupling steady between the ortho-hydrogens is normally bigger than that between the meta-hydrogens, which is reliable with the proposed replacement design. Generally speaking, the 1H NMR range can give important data on the compound construction of vanillin and backing the proposed structure in view of substance shift tasks and coupling constants of the fragrant hydrogen particles.
To learn more about chemical shift assignments, refer:
https://brainly.com/question/30598795
#SPJ4
the half life for a first order reaction is 27 min. how long will it take for 4 half lives to occur?
The time required for one half-life in a first-order reaction is given by the formula below and it shows the result how it will take 108 minutes for 4 half-lives to occur in this first-order reaction.
The formula is t1/2 = 0.693 / k
where k is the rate constant for the reaction.
Given that the half-life of the reaction is 27 minutes, we can rearrange this formula to solve for the rate constant:
k = 0.693 / t1/2
k = 0.693 / 27 min
k = 0.0257 min^-1
Now we can use the first-order rate law to determine the time required for 4 half-lives to occur:
t = (4 x t1/2) = (4 x 27 min) = 108 min
So, it takes 108 mins that is equal to one hour forty eight minutes to occur four half lives.
Learn more about First Order Reaction here:
brainly.com/question/12446045
#SPJ4
How many grams of magnesium chloride (MgCl2) solution would contain 13.5 grams of solute?
Please show work
Answer:
To solve this problem, we need to know the concentration of the magnesium chloride solution. Without this information, we cannot determine how many grams of the solution would contain 13.5 grams of solute.
The concentration of a solution is typically expressed in terms of the number of moles of solute dissolved in a liter (or other volume) of solution. We would need this information to calculate the mass of the solution that would contain 13.5 grams of solute.
If you have any additional information or context, please let me know and I will be happy to try to help further.
tetracyanoethylene has the skeleton shown below: from its lewis structure determine the following: reference: ref 5-2 how many of the atoms are sp 2 hybridized?
All 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Option 1 is correct.
In the Lewis structure of tetracyanoethylene, there are a total of 12 carbon atoms, 4 nitrogen atoms, and 6 double bonds. Each carbon atom has a double bond with a neighboring carbon atom and a triple bond with a neighboring nitrogen atom, while each nitrogen atom has a triple bond with a neighboring carbon atom.
To determine how many of the atoms are sp² hybridized, we can look at the electronic geometry around each atom in the molecule. The carbon atoms in tetracyanoethylene have a trigonal planar geometry, which corresponds to sp² hybridization, due to the three atoms bonded to each carbon atom lying in the same plane.
Therefore, all 12 carbon atoms in tetracyanoethylene are sp² hybridized. In summary, all 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Hence Option 1 is correct.
The complete question is:
Tetracyanoethylene has the skeleton shown below: from its Lewis structure determine the following: Reference: Ref 5-2 (The image attached). How many of the atoms are sp² hybridized?
12141610To know more about the Lewis structure, here
https://brainly.com/question/30247091
#SPJ4
Select the best claim
Responses
The storm happened because cold low pressure air mass meets a warmer, higher pressure air mass.
The storm happened because cold low pressure air mass meets a warmer, higher pressure air mass.
The storm happened because a cold air mass was colliding with a warm air mass creating a front.
The storm happened because a cold air mass was colliding with a warm air mass creating a front.
The storm happened because a cold air mass was colliding with a cold air mass reaching equilibrium quickly.
The storm happened because a cold air mass was colliding with a cold air mass reaching equilibrium quickly.
The storm happened because a warm air mass was colliding with a warm air mass reaching equilibrium slowly.
The best claim is: The storm happened because a cold air mass was colliding with a warm air mass creating a front.
The best explanation is "The storm occurred as a result of a front being formed by the collision of a cold air mass and a warm air mass." This assertion is confirmed by the observation that cold and warm air don't mix right away when they come into contact. Instead, the two air masses form a boundary known as a front when the colder, denser air mass passes beneath the warmer one. Storms may arise as a result of the movement and interaction of these air masses at the front. In contrast to the other possibilities, this assertion provides a more thorough description of the atmospheric circumstances that can result in the genesis of a storm.
Learn more about storm here:
https://brainly.com/question/11163773
#SPJ1
a meal providing 1200 kcalories contains 10 g of saturated fats, 14 g of monounsaturated fats, and 20 g of polyunsaturated fats. what is the percentage of energy supplied by the lipids?
The lipids in the meal provide 33% of the total energy.
To calculate the percentage of energy supplied by the lipids in the meal, we need to know the total number of calories provided by the lipids. Since 1 gram of fat provides 9 calories of energy, we can calculate the total number of calories provided by the different types of fats in the meal as follows;
Total calories from saturated fats = (10 g) x (9 kcal/g) = 90 kcal
Total calories from monounsaturated fats = (14 g) x (9 kcal/g) = 126 kcal
Total calories from polyunsaturated fats = (20 g) x (9 kcal/g) = 180 kcal
The total number of calories provided by the lipids in the meal is therefore; Total calories from all fats = 90 kcal + 126 kcal + 180 kcal = 396 kcal
To calculate the percentage of energy supplied by the lipids, we can divide the total number of calories provided by the lipids by the total number of calories in the meal and then multiply by 100
Percentage of energy supplied by lipids = (396 kcal / 1200 kcal) x 100% = 33%
Therefore, the percentage of energy supplied by lipids will be 33%.
To know more about lipids here
https://brainly.com/question/3498396
#SPJ4
Need help on question 16
Answer: HF
If a hydrogen is bonded to an oxygen, fluorine, or nitrogen atom, it will form a hydrogen bond. Due to an unequal sharing of electrons, there is a significant dipole moment where the hydrogen atom is positive and the flourine/oxygen/nitrogen is negative.
What concentrations of acetic acid and sodium acetate are requiredto prepare a buffer solution with pH = 4.60? Ka =1.8 x 10-5 for acetic acid.
The concentrations of acetic acid and sodium acetate required to prepare a buffer solution with a pH of 4.60 are 1.70 M and 0.756 M, respectively.
Acetic acid (CH3COOH) and sodium acetate (CH3COO–Na+) are required to prepare a buffer solution with a pH of 4.60.
The dissociation of acetic acid is given below:CH3COOH(aq) ↔ CH3COO–(aq) + H+(aq) Ka = [CH3COO–][H+]/[CH3COOH] = 1.8 x 10-5The formula for pH is pH = pKa + log [salt]/[acid]Substituting the given values in the formula we get,
4.60 = pKa + log [salt]/[acid]pKa = -log Ka = -log (1.8 x 10-5) = 4.74
Therefore, we get,
4.60 = 4.74 + log [salt]/[acid]log [salt]/[acid] = 4.60 – 4.74 = -0.14[salt]/[acid] = antilog (-0.14) = 0.445
The ratio of the concentration of the salt to that of the acid is 0.445. As both the acetic acid and the sodium acetate are weak electrolytes, we can assume that the ionic strength of the buffer solution will be negligible.
As a result, the ratio of the moles of the salt and acid will be the same as the ratio of their respective concentrations. Hence, if the concentration of the acetic acid is ‘a’, then the concentration of the sodium acetate should be 0.445 times the concentration of the acetic acid.
Therefore, the concentrations of acetic acid and sodium acetate required to prepare a buffer solution with a pH of 4.60 are 1.70 M and 0.756 M, respectively.
To know more about concentrations refer to-
brainly.com/question/10725862#
#SPJ11
an ionic compound is prepared according to the following unbalanced chemical equation. a -g sample of contains molecules. the compound consists of by mass. what are the identities of m and x, and what is the correct name for ? starting with g each of m and , what mass of can be prepared?
Correct name is, M: Al X: Cl. The correct name for MX3 is aluminum trichloride. Starting with 1.00 g each of Al and Cl2, the maximum mass of AlCl3 that can be prepared is 2.41 g.
Use Avogadro's number to convert the number of molecules to moles:
9.26 x 10^20 molecules X × (1 mol X / 6.022 x 10^23 molecules X) = 0.0154 mol X
Since the compound MX3 has three X atoms for every M atom, we know that the number of moles of M in the sample is:
0.0154 mol X / 3 = 0.00513 mol M
Next, we can use the mass percent of X in MX3 to find the mass of X in the compound. If we assume a 100 g sample of MX3, then the mass of X in the sample would be:
60.40 g X / 100 g MX3 × 100 g = 60.40 g X
We can convert this mass to moles using the molar mass of X:
60.40 g X × (1 mol X / 39.95 g X) = 1.51 mol X
Since there are three X atoms in each molecule of MX3, we know that the total number of moles of X in 1.00 g of X2 is:
1.00 g X2 × (1 mol X2 / 31.84 g X2) × 2 mol X / 1 mol X2 = 0.0627 mol X
Similarly, the number of moles of M in 1.00 g of M is:
1.00 g M × (1 mol M / 26.98 g M) = 0.0371 mol M
The limiting reactant in the reaction to form MX3 will be the element that produces the smaller amount of product, which in this case is M. Therefore, the maximum mass of MX3 that can be prepared using 1.00 g of M and 1.00 g of X2 is:
0.0371 mol M × (1 mol MX3 / 1 mol M) × (123.32 g MX3 / 1 mol MX3) = 4.57 g MX3
To know more about compound, here
brainly.com/question/14522285
#SPJ4
--The complete question is, An ionic compound MX3 is prepared according to the following unbalanced chemical equation. M+XMX3 A 0.109-g sample of X, contains 9.26 x 1020 molecules.
The compound MX; consists of 60.40% X by mass. What are the identities of M and X? (Express your answer as a chemical symbol.)
M: X: What is the correct name for MX3?
Starting with 1.00 g each of M and of X2, what mass of MX, can be prepared?--
what compound(s) are added to nacl to make it iodized salt? indicate if the compound(s) you identified are ionic or molecular compound(s).
The compound that is added to NaCl to make it iodized salt is potassium iodide (KI). Potassium iodide is an ionic compound. The iodine present in potassium iodide prevents goiter, which is a swelling of the thyroid gland due to iodine deficiency.
In many countries, the salt used for cooking is iodized with potassium iodide, sodium iodide, or potassium iodate to prevent iodine deficiency disorders. The primary compound that is added to NaCl to make it iodized salt is potassium iodide (KI).Potassium iodide (KI) is an ionic compound that is added to sodium chloride (NaCl) to produce iodized salt.
Iodine in the form of KI helps prevent goiter, which is the swelling of the thyroid gland caused by a lack of iodine. Many nations use iodized salt to prevent iodine deficiency disorders, and the iodization process typically involves the addition of potassium iodide, sodium iodide, or potassium iodate to NaCl.
To learn more about NaCl here:
https://brainly.com/question/1550455
#SPJ11
2. The approximate concentration of hydrochloric acid, HCl, in the stomach (stomach acid) is 0.17M. Calculate the mass of the following antacids required to neutralize 50cm of stomach acid. (a) Bicarbonate of soda NaHCO3 (b) Aluminum hydroxide, Al(OH)3 Please .
A- approximately 0.714 g of NaHCO3 is required to neutralize 50 mL of 0.17 M HCl. b- approximately 0.221 g of Al(OH)3 is required to neutralize 50 mL of 0.17 M HCl.
(a) Bicarbonate of soda, NaHCO₃, reacts with hydrochloric acid, HCl, to produce sodium chloride, NaCl, water, and carbon dioxide gas, CO₂, according to the balanced chemical equation:
NaHCO₃(s) + HCl (aq) → NaCl (aq) + H₂O (l) + CO₂ (g)
From the balanced equation, the stoichiometry of the reaction is 1 mole of NaHCO₃ reacts with 1 mole of HCl. The molar mass of NaHCO₃ is 84.01 g/mol.
To calculate the mass of NaHCO₃ required to neutralize 50 mL of 0.17 M HCl, we need to first calculate the number of moles of HCl in 50 mL of the solution:
0.17 M = 0.17 mol/L
Number of moles of HCl in 50 mL = (0.17 mol/L) x (0.050 L) = 0.0085 mol
Since 1 mole of NaHCO₃ reacts with 1 mole of HCl, we need 0.0085 moles of NaHCO₃ to neutralize the acid. Therefore, the mass of NaHCO₃ required is:
Mass of NaHCO₃ = 0.0085 mol x 84.01 g/mol = 0.714 g
(b) Aluminum hydroxide, Al(OH)₃, reacts with hydrochloric acid, HCl, to produce aluminum chloride, AlCl₃, water, and heat, according to the balanced chemical equation:
Al(OH)₃ (s) + 3 HCl (aq) → AlCl₃ (aq)
From the balanced equation, the stoichiometry of the reaction is 1 mole of Al(OH)₃ reacts with 3 moles of HCl. The molar mass of Al(OH)₃ is 78.00 g/mol.
To calculate the mass of Al(OH)₃ required to neutralize 50 mL of 0.17 M HCl, we need to first calculate the number of moles of HCl in 50 mL of the solution, as we did in part (a):
Number of moles of HCl in 50 mL = 0.0085 mol
Since 1 mole of Al(OH)₃ reacts with 3 moles of HCl, we need 0.0085/3 = 0.00283 moles of Al(OH)₃ to neutralize the acid. Therefore, the mass of Al(OH)₃ required is:
Mass of Al(OH)3 = 0.00283 mol x 78.00 g/mol = 0.221 g
Learn more about mass here:
https://brainly.com/question/17067547
#SPJ1
a lithium atom contains 3 electrons, whereas a fluorine atom contains 9 electrons. which correctly describes the formation of a bond between lithium and fluorine atoms?
When a bond is formed between a lithium atom and a fluorine atom, the electrons are transferred from the lithium atom to the fluorine atom to form an ionic bond.
Lithium has one valence electron in its outermost shell, while fluorine has seven valence electrons in its outermost shell. Lithium can lose its valence electron to achieve a stable configuration similar to that of the noble gas helium, which has a full outermost shell with two electrons.
On the other hand, fluorine can gain one electron to achieve a stable configuration similar to that of the noble gas neon, which has a full outermost shell with eight electrons.
Thus, when a bond is formed between a lithium atom and a fluorine atom, the lithium atom loses its one valence electron to become a positively charged ion ([tex]Li^+[/tex]), while the fluorine atom gains one electron to become a negatively charged ion ([tex]F^-[/tex]).
The opposite charges of these ions attract each other, resulting in the formation of an ionic bond between them. The resulting compound is lithium fluoride (LiF), a solid with high melting and boiling points due to the strong electrostatic forces between the positively charged lithium ions and negatively charged fluoride ions.
For more question on ionic bond click on
https://brainly.com/question/13526463
#SPJ11