The substance B will have a higher boiling point.
When we talk about substances, they have different physical and chemical properties, such as melting point, boiling point, density, etc. These properties depend on different factors such as intermolecular forces, molecular mass, etc. The given question is asking about the boiling point of two different substances, one that has molecules that attract with London Dispersion attraction and the other with Dipole-Dipole attraction.
London Dispersion Attraction: London Dispersion force is a temporary attractive force that occurs between the atoms or molecules of nonpolar compounds. It is a type of Van der Waals force that arises due to instantaneous dipoles that arise in the electron clouds of the molecules. These forces are very weak and short-range.
Dipole-Dipole Attraction: Dipole-dipole attraction is an attractive force that occurs between the oppositely charged ends of polar molecules. This force is stronger than London dispersion forces because it involves two dipoles, and it is a long-range force.Now, to answer the question, we need to see which of these forces is stronger. We know that London Dispersion forces are weaker than Dipole-Dipole forces.
Therefore, substance B, which has molecules that attract with Dipole-Dipole attraction, will have a higher boiling point than substance A, which has molecules that attract with London Dispersion attraction. Thus, the boiling point of a substance depends on the type of intermolecular force it has.
for more such questions on boiling point :
https://brainly.com/question/27349376
#SPJ11
usnco when the substances are arranged in order of increasing boiling points, which order is correct?
#SPJ4
Full Question
usnco when the substances are arranged in order of increasing boiling points, which order is correct?
g which statements are correct regarding a vacuum filtration? (check all that apply.) group of answer choices a short-stem funnel can be used for a vacuum filtration. the solution cannot be too acidic or too basic when using filter paper. no filter paper is needed when using a hirsch funnel. vacuum filtration works well with boiling solutions. the size of the funnel must be adjusted based on the quantities being handled.
Answer:
The correct statements regarding vacuum filtration are:
A short-stem funnel can be used for a vacuum filtration.
The size of the funnel must be adjusted based on the quantities being handled.
Explanation:
Vacuum filtration is a technique commonly used in chemistry labs to separate solids from liquids. A short-stem funnel is often used as it provides a better seal with the filter paper. The size of the funnel is chosen based on the volume of the liquid being filtered. If it is too small, the liquid will take longer to pass through the filter, and if it is too large, the filter paper may tear or the solid may not be retained properly. However, some statements regarding vacuum filtration are incorrect. Filter paper can be used with a wide range of solutions, including acidic and basic ones, as long as the filter paper is compatible with the solution. A hirsch funnel requires filter paper to function correctly. Lastly, vacuum filtration should be avoided with boiling solutions as the filter paper can disintegrate or the flask may crack under the pressure. Instead, hot filtration is used by filtering the solution while it is hot and then allowing it to cool to room temperature before collecting the solid.
The correct options are: 1, 2, and 4. Vacuum filtration is a commonly used technique in chemistry for separating solids from liquids. It involves using a vacuum to create a pressure difference across a filter, causing the liquid to be drawn through the filter while leaving the solid behind.
The technique is used in a variety of applications, such as separating precipitates from solutions or collecting cells from a culture. The following statements are correct regarding a vacuum filtration:
1. A short-stem funnel can be used for a vacuum filtration.
2. The solution cannot be too acidic or too basic when using filter paper.
3. No filter paper is needed when using a Hirsch funnel.
4. The size of the funnel must be adjusted based on the quantities being handled.
Therefore, correct options are: 1, 2, and 4.
When performing a vacuum filtration, it is important to select the appropriate size and type of funnel for the amount and type of material being filtered. It is also crucial to choose the correct filter paper, which should be compatible with the chemical properties of the solution being filtered. The use of a fritted glass filter or a Hirsch funnel may be necessary in some cases.
Vacuum filtration can be a time-saving and efficient method of separating solids and liquids, but it is important to carefully follow proper techniques and safety precautions to avoid any accidents or contamination.
To learn more about Vacuum filtration here:
https://brainly.com/question/31326542
#SPJ11
Avogadro's principle, the coefficients in chemical equations involving only gases represent two types of quantities. Name the two quantities
The coefficients in chemical equations involving only gases represent two types of quantities: Stoichiometric coefficients and Volume coefficients.
The term "molar ratio" means what exactly?
As a balanced chemical reaction, the ratio of any two compounds' mole amounts—measured in moles—is known as the mole ratio. In the balancing chemical equation, the proportions of the molecules required to accomplish the reaction are compared.
Stoichiometric coefficients: These coefficients represent the relative numbers of molecules or moles of the reactants and products in the balanced chemical equation. They indicate the ratio in which the reactants combine and the products are formed.
Volume coefficients: These coefficients represent the volumes of gases involved in the reaction at constant temperature and pressure, according to Avogadro's principle. The volumes of gases involved in a chemical reaction are directly proportional to the number of moles of gases involved, as well as to the coefficients in the balanced chemical equation.
To know more about Molar ratio visit:
brainly.com/question/17920577
#SPJ1
what is the average oxidation number of the irons in fe3o7? note that average oxidation numbers are not restricted to integer values.
The oxidation number of iron in Fe3O7 is not constant, but the average oxidation number of iron in this compound is 4.67.
To find the average oxidation number of iron (Fe) in Fe3O7, we can use the fact that the sum of the oxidation numbers of all atoms in a neutral molecule or compound is equal to zero.
Let the oxidation number of Fe be x. The oxidation number of oxygen (O) is -2.
The compound Fe3O7 contains 3 iron atoms and 7 oxygen atoms. Using the fact that the sum of the oxidation numbers is zero, we can set up the following equation:
3x + 7(-2) = 0
Solving for x, we get:
3x - 14 = 0
3x = 14
x = 4.67
Therefore, the average oxidation number of iron in Fe3O7 is 4.67, the average oxidation number is not restricted to integer values.
To learn more about average oxidation number, refer:
https://brainly.com/question/29201509
#SPJ4
how much heat (in joules) is used to heat a 89.05 gram sample of iron from 14.15 degrees celcius to 100.00 degrees celcius if the specific heat of fe is 0.450 j/g*c? record your answer to 2 decimal spaces.
We are going to utilize the accompanying formula to determine the amount of heat necessary to warm a particle of iron between 14.15 degrees Celsius through 100.00 degrees Celsius:
Q = m * c * ΔT
where Q denotes the quantity of heat
m = sample mass (in grams)
c = specific heat of the material (in J/g*C)
T = temperature variation (in C)
Substituting the provided values yields:
Q = 89.05 g * 0.450 J/gC * (100.00 C - 14.15 C)
Q = 89.05 g * 0.450 J/gC * 85.85 C
Q = 3,451.52 J
As a result, the thermal energy required to heat an 89.05 gram sample of iron from 14.15°C to 100.00°C is 3,451.52 J. (joules).
To know more about iron click here
brainly.com/question/30570319
#SPJ4
zn hpo32- 2h2oh2po2- zn(oh)2 oh- in the above reaction, the oxidation state of phosphorus changes from to . how many electrons are transferred in the reaction?
The terms are zn, hpo32-, 2h2o, h2po2-, zn(oh)2, and oh-In the above reaction, the oxidation state of phosphorus changes from 5 to 3. In the reaction, four electrons are transferred from Zinc(Zn) to HPO32-.Therefore, the correct answer is : Four electrons are transferred in the reaction.
The oxidation state is the same as the oxidation number. Oxidation state is the charge on the atom of an element when all other atoms are removed from the molecule as ions. The oxidation state of phosphorus changes from 5 to 3 in the given reaction. In the beginning, the phosphorus atom has an oxidation number of +5. In the final product, phosphorus has an oxidation number of +3. Hence, the oxidation state of phosphorus changes from 5 to 3. Electrons transferred Four electrons are transferred from Zinc (Zn) to HPO32- in the reaction.
The electrons transferred are equal to the difference in the oxidation state of the reactants and the products. In the given reaction, the difference in oxidation state is (5-3) = 2. Since one electron is transferred for each unit change in oxidation state, there are two electrons transferred. Therefore, four electrons are transferred in the reaction.
In the given reaction:
Zn + HPO3²⁻ + 2H2O → H2PO2⁻ + Zn(OH)2 + OH⁻
So the oxidation state of phosphorus changes from +5 in HPO3²⁻ to +1 in H2PO2⁻. A total of 4 electrons are transferred in this reduction process.
For more questions on: electrons
https://brainly.com/question/29522188
#SPJ11
how might the polarity of h bond and electronegativity of the center atom make it more likely for the hydrogen ion to leave the molecule
The polarity of a hydrogen bond and the electronegativity of the centre atom can affect the likelihood of a hydrogen ion leaving the molecule because they influence the strength of the bond between the hydrogen and the centre atom.
The more polar a hydrogen bond is, the weaker it is, and the more likely it is for the hydrogen ion to leave the molecule. This is because polar bonds have an uneven distribution of electrons, with one atom having a slightly negative charge and the other having a slightly positive charge. This means that the bond is not as strong as a nonpolar bond, where the electrons are shared equally between the atoms.
Additionally, the electronegativity of the centre atom can also affect the strength of the hydrogen bond. The more electronegative the centre atom is, the stronger the bond between the hydrogen and the central atom will be, and the less likely it is for the hydrogen ion to leave the molecule. Overall, a combination of a less polar hydrogen bond and a more electronegative centre atom will make it less likely for the hydrogen ion to leave the molecule, while a more polar hydrogen bond and a less electronegative centre atom will make it more likely for the hydrogen ion to leave the molecule.
Learn more about Hydrogen bonds, here:
https://brainly.com/question/11679211
#SPJ4
given the following value, is the starting material or product favored at equilibrium? select the single best answer. keq = 6.5 a. product
b. starting material
When the value of Keq is greater than 1, the equilibrium is shifted toward the products. Therefore, if Keq is equal to 6.5, the product is favored at equilibrium. Answer: a. product.
Keq is defined as the equilibrium constant for a chemical reaction. It is a measure of the extent to which the reaction proceeds to form products versus starting materials at equilibrium. When Keq is greater than 1, it indicates that the products are more stable and favored at equilibrium.
Conversely, when Keq is less than 1, it indicates that the starting materials are more stable and favored at equilibrium. When Keq is equal to 1, it indicates that the reaction is at equilibrium and there is an equal amount of products and starting materials present.
The correct answer is option a.
To know more about equilibrium refer to-
brainly.com/question/30807709#
#SPJ11
which molecules of the following gases will have the greatest average kinetic energy? 1. h2 at 0.5 atm and 298 k 2. co2 at 1 atm and 298 k 3. n2 at 1 atm and 298 k 4. all of the molecules have the same average kinetic energy. 5. he at 0.1 atm and 298 k
The kinetic energy of molecules depends on absolute temperature. So here since all the temperature are equal, all the molecules will have same average kinetic energy. So option 4 is right.
Kinetic energy of a molecule of a gas depends on the movement of the molecule. It is governed by the kinetic gas equation. The kinetic energy and temperature is related by the equation
KE = [tex]\frac{3}{2}[/tex] nRT
n is the number of moles
R is universal gas constant
T is the absolute temperature
KE is directly proportional to the temperature and increases and decreases with it. Here all gases exists at the same temperature. Pressure does not have any effect on the kinetic energy of gases.
So option 4 will be the correct answer.
For more information regarding Kinetic energy of gases, kindly refer
https://brainly.com/question/2696774
#SPJ4
a hypoeutectoid steel is one with an alloy composition between that of the left-hand end of the tie line defining the eutectoid reaction and the eutectoid composition, i.e., between ---select--- weight percent carbon. it is common though to refer to any composition to the ---select--- of the eutectoid point as hypoeutectoid. a hypereutectoid steel is one with an alloy composition between ---select--- wei
A hypoeutectoid steel is one with an alloy composition between that of the left-hand end of the tie line defining the eutectoid reaction and the eutectoid composition, i.e., between 0 and 0.76 weight percent carbon. It is common though to refer to any composition to the left of the eutectoid point as hypoeutectoid. A hypereutectoid steel is one with an alloy composition between 0.76 and 2.14 weight percent carbon.
In simpler terms, hypoeutectoid steel contains less carbon than the eutectoid composition (0.76 weight percent carbon), while hypereutectoid steel contains more carbon than the eutectoid composition. The eutectoid point is where the steel has the perfect balance of carbon content and can exist in both austenite and ferrite phases at a specific temperature (the eutectoid temperature).
When cooling a hypoeutectoid steel, it first forms a proeutectoid ferrite phase, followed by the eutectoid transformation of the remaining austenite into pearlite (a mixture of ferrite and cementite). This results in a microstructure with ferrite and pearlite phases.
On the other hand, cooling a hypereutectoid steel leads to the formation of proeutectoid cementite, followed by the eutectoid transformation of the remaining austenite into pearlite. This results in a microstructure with cementite and pearlite phases.
Understanding the differences between hypoeutectoid and hypereutectoid steels is important in selecting the appropriate material for specific applications, as their mechanical properties, such as strength and ductility, can vary significantly.
for more such question on hypoeutectoid steel
https://brainly.com/question/27433512
#SPJ11
a mass spectrometry experiment on the unknown compound from question 2 determines its molar mass to be 120.1 g/mol. what is the total number of atoms in the molecular formula of the compound? determine the correct number of c, h and o atoms in the molecular formula and then sum them together to answer this question.
To determine the total number of atoms in the molecular formula of the compound, we need to know the molecular formula itself. Hence, the molecular formula of the compound would be C1H0.36O3.6.
Assuming that the compound contains only carbon, hydrogen, and oxygen atoms, we can calculate the total number of atoms in the molecular formula as follows:
Molar mass of compound = (number of carbon atoms x atomic mass of carbon) + (number of hydrogen atoms x atomic mass of hydrogen) + (number of oxygen atoms x atomic mass of oxygen)
120.1 g/mol = (x carbon atoms x 12.01 g/mol) + (y hydrogen atoms x 1.01 g/mol) + (z oxygen atoms x 16.00 g/mol)
Simplifying the equation, we get:
12.01x + 1.01y + 16.00z = 120.1
To solve for the values of x, y, and z, we need additional information. However, we can make some assumptions based on the typical ratios of carbon, hydrogen, and oxygen atoms in organic compounds.
For example, if we assume that the compound contains only carbon, hydrogen, and oxygen atoms in a ratio of 1:2:1, we can write the following system of equations:
x + 2y + z = total number of atoms in the molecular formula
12.01x + 1.01y + 16.00z = 120.1
Substituting the first equation into the second equation and solving for x, we get:
12.01(x + 2y + z) + 1.01y + 16.00z = 120.1
12.01x + 25.03y + 28.01z = 120.1
12.01x = 120.1 - 25.03y - 28.01z
x = (120.1 - 25.03y - 28.01z)/12.01
We can then substitute this value of x into the first equation and solve for y and z:
(120.1 - 25.03y - 28.01z)/12.01 + 2y + z = total number of atoms in the molecular formula
Simplifying this equation and solving for y, we get:
y = (total number of atoms in the molecular formula - z - 2)/(14.04)
We can then use this value of y to solve for z:
z = (total number of atoms in the molecular formula - 2 - 14.04y)
If we assume that the total number of atoms in the molecular formula is 10, we can calculate the number of carbon, hydrogen, and oxygen atoms as follows:
x = 1
y = (10 - 2 - 14.04(2))/(14.04) ≈ 0.36
z = (10 - 2 - 14.04(0.36)) ≈ 3.6
However, the molecular formula of the compound would be C1H0.36O3.6, which has a total of 5.96 atoms. it is important to note that this is just an example based on assumptions, and the actual molecular formula may be different.
Learn more about Molecular formulas here:
brainly.com/question/28647690
#SPJ4
if you start with 0.373 m a(g), 0.396 m b(g), 0.552 m c(g), and 3.95 m d(g), what is the equilibrium concentration of c(g) and d(g)?
The equilibrium concentrations of reactant and products when 0.388 moles of PCl5(g) are introduced into a 1.00 L vessel at 500 K is 0.063 M.
Equilibrium concentration can be defined as when the both the reactants and the products of the reaction are in a concentration that is not in change with time. This is called as the state of chemical equilibrium. In the equilibrium state, the rate of forward reaction is same as the rate of backward reaction when the reaction is at equilibrium. Equilibrium concentration being the ratio of the concentrations raise to the stoichiometric coefficients.
Kc = [PCl3][Cl2]/[PCl5] = 1.2x10-2
Kc = [PCl3][Cl2]/[PCl5] = (x)(x)/(0.388-x) = 1.20x10-2 =
x2 + 1.2x10-2x - 4.66x10-3 = 0
x = -b ± √b2 - 4ac2a
x = 0.0626
[PCl5] = 0.388 - x = 0.388 - 0.0626 = 0.325 M
[PCl3] = [Cl2] = x = 0.063 M
To learn more about equilibrium concentrations
https://brainly.com/question/10838453
#SPJ4
The complete question is,
Calculate the equilibrium concentrations of reactant and products when 0.388 moles of PCl5(g) are introduced into a 1.00 L vessel at 500 K.
the salt that results from the hydrolysis of salicylic acid is soluble in water, but salicylic acid is not, which is why salicylic acid precipitates out of solution after the acidic work-up. why is the solubility of the salt in water higher than the solubility of salicylic acid in water?
Salicylic acid (SA) is soluble in organic solvents such as ether, benzene, and chloroform, but it is not soluble in water. Sodium salicylate, on the other hand, is water-soluble. Sodium hydroxide is used to neutralize the acidic solution generated when salicylic acid is hydrolyzed.
Sodium hydroxide is an alkaline solution that neutralizes the acid and produces sodium salicylate, which is water-soluble. The salicylic acid precipitates out of the solution as a result of the acidic work-up. The salt that results from the hydrolysis of salicylic acid is more soluble in water than salicylic acid due to its polar nature. Salicylic acid is a weak acid with a polar carboxylic acid functional group and a non-polar benzene ring. When the polar carboxylic acid group interacts with water, it forms hydrogen bonds with water molecules. The non-polar benzene ring, on the other hand, is insoluble in water due to its non-polar nature. The salt formed after hydrolysis, such as sodium salicylate, is more soluble in water than salicylic acid because it is more polar than salicylic acid. As a result, the salt dissolves easily in water.
to learn more about: Salicylic acid
https://brainly.com/question/14925906
#SPJ11
do you expect salicylic acid to be soluble in nahco3? what happens when a benzoic acid derivatives is reacted with a base such as nahco3? it may be beneficial to know that the pka of benzoic acid is 4.2 and the pka of h2co3 is 10.3.
When benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction.
Salicylic acid is expected to be partially soluble in NaHCO₃ due to its acidic nature. Salicylic acid has a carboxylic acid group which can ionize in the presence of a base such as NaHCO₃ to form a salt that is partially soluble in water. However, the solubility of salicylic acid in NaHCO₃ will not be as high as that of a strong acid like HCl.
When a benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction. The benzoic acid derivative reacts with the base to form a salt and water. The salt formed is usually more polar and more soluble in water than the original benzoic acid derivative.
Reaction will be represented by the following equation; Benzoic acid derivative (acid) + NaHCO₃ (base) → Salt (more polar) + H₂O
In the case of salicylic acid, the reaction can be represented as;
C₆H₄(OH)COOH (salicylic acid) + NaHCO₃ (base) → C₆H₄(OH)COONa (sodium salicylate) + H₂O
The pKa value of benzoic acid is 4.2, which means that it is a weak acid and will react with a weak base like NaHCO₃ to form a salt. The pKa value of H₂CO₃ is 10.3, which means that it is a strong acid and will not react with a weak base like NaHCO₃.
To know more about benzoic acid here
https://brainly.com/question/28168596
#SPJ4
in the experiment, you will combine different volumes of naoh and unknown acid and measure the temperature for each combination. the ratios of volumes that give the highest temperature change on the graph will be equal to
In the experiment, you will combine different volumes of NaOH and an unknown acid and measure the temperature for each combination. The ratios of volumes that give the highest temperature change on the graph will be equal to the stoichiometric ratio or the equivalence point of the reaction.
The equivalence point is the point at which the moles of NaOH and the moles of the unknown acid are perfectly balanced, resulting in the greatest temperature change due to the complete neutralization of the acid and base. To find this ratio, follow these steps:
1. Record the initial temperature of the NaOH and unknown acid solutions separately.
2. Combine different volumes of NaOH and the unknown acid in a series of trials, making sure to note the specific volumes used for each trial.
3. Measure the final temperature of the solution after each combination, and calculate the temperature change by subtracting the initial temperatures from the final temperature.
4. Plot the temperature changes on a graph with the x-axis representing the volume ratio of NaOH to the unknown acid, and the y-axis representing the temperature change.
5. Observe the graph and identify the point with the highest temperature change, which corresponds to the stoichiometric ratio or equivalence point of the reaction.
The ratio at this highest point is the correct proportion of NaOH to the unknown acid required for complete neutralization.
Learn more about equivalence point here:
brainly.com/question/29999744
#SPJ11
a 4L of gas is under a pressure of 6atm. what is the volume of the gas at 2atm?
Boyle's Law-
[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]
(Pressure is inversely proportional to the volume)
Where-
[tex]\sf V_1[/tex] = Initial volume[tex]\sf V_2[/tex] = Final volume[tex]\sf P_1[/tex] = Initial pressure[tex]\sf P_2[/tex] = Final pressureAs per question, we are given that -
[tex]\sf V_1[/tex] = 4 L[tex]\sf P_1[/tex] =6 atm[tex]\sf P_2[/tex] = 2 atmNow that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -
[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]
[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 6 \times 4= 2\times V_2\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{6 \times 4 }{2}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 24}{2}}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 12 \:L }\\[/tex]
Therefore, the new volume of the gas will become 12 L at 2atm.
calculate the mass of sodium bicarbonate and mass of sodium carbonate needed to make 50.0 ml of a 0.100 m carbonate buffer with ph
To make 50.0 mL of a 0.100 M carbonate buffer with a pH of 9.00, we would need to weigh out 0.223 g of NaHCO₃ and 0.177 g of Na₂CO₃.
In order to calculate the hundreds of sodium bicarbonate and sodium carbonate wished to make the buffer solution we pick to replicate on consideration on the henderson-hasselbalch equation which relates the ph of the buffer to the pka and the ratio of the concentrations of the susceptible acid and its conjugate base
Buffer solution mass calculation
calculate the mass of sodium bicarbonate and mass of sodium carbonate needed to make 50.0 ml of a 0.100 m carbonate buffer with ph
In order to calculate the masses of sodium bicarbonate and sodium carbonate needed to make the buffer solution, we need to consider the Henderson-Hasselbalch equation, which relates the pH of the buffer to the pKa and the ratio of the concentrations of the weak acid and its conjugate base:
pH = pKa + log([A-]/[HA])
where pH is the desired pH of the buffer, pKa is the acid dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
In this case, we want to make a carbonate buffer, which consists of the weak acid H₂CO₃ (carbonic acid) and its conjugate base HCO₃- (bicarbonate ion), with a pH of 9.00. The pKa of carbonic acid is 6.35. Using the Henderson-Hasselbalch equation, we can solve for the ratio of [HCO₃-]/[H₂CO₃] that gives a pH of 9.00:
9.00 = 6.35 + log([HCO₃-]/[H₂CO₃])
2.65 = log([HCO₃-]/[H₂CO₃])
10^2.65 = [HCO₃-]/[H₂CO₃]
[1.98] = [HCO₃-]/[H₂CO₃]
So the ratio of [HCO₃-]/[H₂CO₃] in the buffer should be approximately 2. Therefore, we can choose any total concentration for the buffer as long as the ratio of bicarbonate to carbonic acid is 2.
Next,
[HCO₃-] = 2 * [H₂CO₃]
[HCO₃-] + [H₂CO₃] = 0.100 M
Substituting the first equation into the second, we get:
3[H₂CO₃] = 0.100 M
[H₂CO₃] = 0.0333 M
[HCO₃-] = 0.0667 M
Similarly, the molecular weight of Na₂CO₃ is 105.99 g/mol, so the mass needed to make 50.0 mL of a 0.0333 M solution is:
mass of Na₂CO₃ = 0.0333 M * 105.99 g/mol * 0.0500 L
= 0.177 g
Therefore, to make 50.0 mL of a 0.100 M carbonate buffer with a pH of 9.00, we would need to weigh out 0.223 g of NaHCO3 and 0.177 g of Na₂CO₃.
learn more about henderson-hasselbalch equation here: brainly.com/question/26746644
#SPJ4
monel metal is an alloy of nickel and copper that contains 28% copper. how many copper atoms are present in a 79 g sample of monel?
There are approximately 1.998 x 10^23 copper atoms in a 79 g sample of Monel.
Monel is an alloy of nickel and copper that contains 28% copper. This means that 100 g of the alloy contains 28 g of copper. To find the amount of copper in a 79 g sample of Monel, we can set up a proportion:
[tex]\dfrac{28\text{ g Cu}}{100\ g} = \dfrac{x\text{ g Cu}}{79\ g}[/tex]
Cross-multiplying, we get:
28 g Cu * 79 g = 100 g * x g Cu
Simplifying
x g Cu = (28 g Cu * 79 g) / 100 g
x g Cu = 22.12 g Cu
To find the number of copper atoms in this amount of copper, we can use Avogadro's number, which tells us the number of atoms in a mole of a substance:
1 mole Cu = 63.55 g Cu contains 6.022 x 10^23 atoms of Cu
Therefore, the number of copper atoms in 22.12 g of copper is:
(22.12 g Cu) / (63.55 g Cu/mol) * (6.022 x 10^23 atoms Cu/mol) = 1.998 x 10^23 atoms of Cu
To know more about alloy, here
brainly.com/question/18404834
#SPJ4
What is the solubility of strontium iodate, Sr(IO3)2, in water? The Ksp for Sr(IO3)2 is 1.14 × 10^−7.
The solubility of strontium iodate, Sr(IO3)2, in water is 6.27 x 10^-4 M. The Ksp for Sr(IO3)2 is 1.14 × 10^-7.
What is the solubility product?Solubility Product Constant (Ksp) is the product of the concentration of the dissolved ions, which, when multiplied, would be equal to the equilibrium constant expression for the ion formation in a saturated solution. The solubility product constant (Ksp) for Sr(IO3)2 is 1.14 × 10^-7.
Ksp is represented as the product of the concentration of the ions, which is [Sr2+][IO32-].Let’s suppose the solubility of strontium iodate in water is S moles/L.Substituting the value of solubility into the Ksp expression, we have;Ksp = [Sr2+][IO32-]1.14 × 10^-7 = S x 2S2 x 3S2
We can now solve for S, which is the solubility of strontium iodate, as follows:S = 6.27 x 10^-4 MTherefore, the solubility of strontium iodate, Sr(IO3)2, in water is 6.27 x 10^-4 M.
To know more about solubility refer to-
brainly.com/question/28170449#
#SPJ11
what is the solubility of silver oxide, , in a solution buffered at ph 10.50? the equilibrium is solubility
The solubility of Ag₂O in a solution buffered at pH 10.50 is approximately 1.46 x 10⁻⁴ M.
The solubility of silver oxide (Ag₂O) in a solution buffered at pH 10.50 depends on the specific buffer used, as well as the temperature and pressure of the system. However, we can make some general predictions based on the solubility product constant (Ksp) of silver oxide and the pH of the buffer.
At pH 10.50, the solution is basic. The basicity will cause the silver oxide to hydrolyze, which means it will react with water to form a silver hydroxide compound. The balanced chemical equation for this reaction is; Ag₂O + H₂O → 2AgOH
The solubility of Ag₂O will then depend on the solubility of AgOH, which has its own Ksp value. The Ksp of AgOH is 1.5 x 10⁻⁸ at 25°C.
If we assume that the hydrolysis reaction has reached equilibrium, we can use the Ksp of AgOH to calculate the solubility of Ag₂O. At equilibrium, the product of the concentrations of the silver and hydroxide ions is equal to Ksp.
[Ag⁺][OH⁻]² = Ksp
Since the hydrolysis reaction produces two moles of AgOH for every mole of Ag₂O, we can write the expression for Ksp in terms of the solubility of Ag₂O, x;
(2x)[OH⁻]² = Ksp
We also know that at pH 10.50, the concentration of hydroxide ions ([OH⁻]) is 3.16 x 10⁻⁴ M. Substituting these values into the expression for Ksp, we can solve for x;
(2x)(3.16 x 10⁻⁴)² = 1.5 x 10⁻⁸
x = 1.46 x 10⁻⁴
To know more about solubility here
https://brainly.com/question/22185953
#SPJ4
ag3po4 has a solubility of 0.013 grams per liter. the molar mass of ag3po4 is 418.58 grams/mol. what is the ksp value of ag3po4?
The Ksp value of Ag₃PO₄ is 2.17 × 10⁻²².
The solubility product constant (Ksp) expression for Ag₃PO₄ will be;
Ag₃PO₄(s) ⇌ 3 Ag⁺(aq) + PO₄³⁻(aq)
Equilibrium expression for this reaction will be written as;
Ksp = [Ag⁺]³[PO₄³⁻]
We are given the solubility of Ag₃PO₄, which is 0.013 grams per liter. To calculate the concentration of Ag⁺ and PO₄³⁻ in the saturated solution, we need to first calculate the molar solubility of Ag₃PO₄
Molar solubility of Ag₃PO₄ = (0.013 g/L) / (418.58 g/mol) = 3.11 x 10⁻⁵ M
Since the stoichiometry of the reaction is 1:3 for Ag⁺ and PO₄³⁻, we can write;
[Ag⁺] = 3 × 3.11 × 10⁻⁵ M = 9.33 × 10⁻⁵ M
[PO₄³⁻] = 3.11 × 10⁻⁵ M
Substituting these values into the Ksp expression, we get;
Ksp = (9.33 × 10⁻⁵)³ × (3.11 × 10⁻⁵)
= 2.17 × 10⁻²²
To know more about Ksp value here
https://brainly.com/question/28167974
#SPJ4
Among the research agenda, which do you think is most appropriate to your community?
The most appropriate research agenda for my community would be focusing on how to reduce poverty and increase economic opportunities.
This would involve researching the current economic conditions in my community, identifying areas where poverty is most prevalent, and exploring potential solutions to create more jobs and increase economic mobility.
Additionally, this may involve researching the effectiveness of government programs and initiatives in the area, as well as exploring potential partnerships with local businesses and organizations to create new economic opportunities.
For more question on research click on
https://brainly.com/question/3628862
#SPJ11
determine the ph of a solution when 25.2 ml of 0.028 m hno3 is mixed with 19.0 ml of a. 0.0140 m naoh.
The pH of the solution is 2.00.
To determine the pH of the solution, we need to first calculate the moles of HNO₃ and NaOH in the solution, and then determine the amount of excess H⁺ or OH⁻ ions in the solution after the acid-base reaction is complete.
Balanced chemical equation for the reaction between HNO₃ and NaOH is;
HNO₃ + NaOH → NaNO₃ + H₂O
From this equation, we can see that one mole of HNO₃ reacts with one mole of NaOH to produce one mole of water and one mole of NaNO₃.
The moles of HNO₃ in the solution can be calculated as follows:
moles HNO₃ = concentration x volume = 0.028 mol/L x 0.0252 L = 0.0007056 mol
The moles of NaOH in the solution can be calculated as follows
moles NaOH = concentration x volume = 0.0140 mol/L x 0.0190 L = 0.000266 mol
Since the reaction between HNO₃ and NaOH is a 1:1 reaction, the moles of HNO₃ in excess can be calculated by subtracting the moles of NaOH from the moles of HNO₃
moles HNO₃ in excess = moles HNO₃ - moles NaOH = 0.0007056 mol - 0.000266 mol = 0.0004396 mol
The volume of the final solution is the sum of the volumes of HNO₃ and NaOH
volume of final solution = 25.2 mL + 19.0 mL = 44.2 mL = 0.0442 L
The concentration of excess HNO₃ can be calculated as;
concentration of HNO₃ in excess = moles HNO₃ in excess / volume of final solution
concentration of HNO₃ in excess = 0.0004396 mol / 0.0442 L = 0.00993 M
The excess H⁺ ions from HNO₃ will react with the OH⁻ ions from NaOH, leaving an excess of H⁺ ions in the solution. The amount of excess H⁺ ions in the solution can be calculated as;
moles of excess H⁺ ions = moles HNO₃ in excess = 0.0004396 mol
The total volume of the solution is 0.0442 L. Therefore, the molarity of H⁺ ions in the solution can be calculated as;
Molarity of H⁺ ions = moles of excess H⁺ ions / total volume of solution
Molarity of H⁺ ions = 0.0004396 mol / 0.0442 L = 0.00993 M
The pH of the solution can be calculated as follows:
pH = -log[H⁺]
pH = -log(0.00993)
pH = 2.00
To know more about acid-base reaction here
https://brainly.com/question/10224396
#SPJ4
when using a cake mix to prepare a cake, the following ingredients are required (shown in the form of a chemical equation). 1 cake mix 3 eggs 0.5 cup oil 1 cup water ---> 1 cake! if you are preparing enough cakes to use up 4 dozen eggs, which conversion factor(s) could be used to predict how much oil will also be needed?
We will need a total of 8 cups of oil to prepare enough cakes to use up 4 dozen eggs.
To prepare enough cakes to use up 4 dozen eggs, we will need a total of; 4 dozen eggs = 4 x 12 = 48 eggs
Since each cake requires 3 eggs, we can calculate the number of cakes we can make as;
48 eggs ÷ 3 eggs per cake = 16 cakes
To predict how much oil will be needed to prepare these 16 cakes, we can use the conversion factor provided in the chemical equation
0.5 cup oil 1 cake mix
This tells us that we will need 0.5 cup of oil for each cake mix used. Since we will be using 16 cake mixes (one for each cake), we can multiply the conversion factor by the number of cake mixes to find the total amount of oil needed;
0.5 cup oil 1 cake mix x 16 cake mixes
= 8 cups of oil
To know more about conversion factor here
https://brainly.com/question/20822566
#SPJ4
Which of these statements best describes the synergistic interaction effect? a. an interaction where two or more medicines taken together have no effect on one another b. an interaction between two or more medicines that increases their effectiveness c. an interaction where two or more medicines taken together produce an unexpected result d. an interaction between two or more medicines that decreases their effectiveness please select the best answer from the choices provided. a b c d
The statements which best describes the synergistic interaction effect is option b. An interaction between two or more medicines that increases their effectiveness.
A synergistic interaction effect is when two or more medicines taken together have a greater effect than the sum of their individual effects. This can lead to an increased effectiveness of the treatment.
Synergistic interaction effect is a phenomenon that occurs when two or more drugs or substances interact in a way that their combined effect is greater than the sum of their individual effects.
In other words, when two or more drugs or substances are used together, they can produce a more powerful and effective response than when used separately.
For more question on synergistic interaction effect click on
https://brainly.com/question/10564761
#SPJ11
Help me answer these please!!
Answer:
Explanation:
adbc
(science)
2. In your own words, explain the following terms using complete sentences:
a. Biosynthesis
s. Selectively permeable
c. Cell response
d. Absorption
3. Describe the cell structure of a typical plant cell. Give the function of each part of the cell structure.
4. Describe the cell structure of a typical animal cell. Give the functions of each part of the cell structure.
a) Biosynthesis, like cellular metabolism, is the production of natural compounds via enzymatic reactions. b) Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration.
What is cellular metabolism?Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration. Specifically, cellular metabolism involves the breakdown of sugar molecules (glucose) for energy, the production of the molecule ATP (adenosine triphosphate), and the exchange of molecules between cells.
A selectively permeable membrane is one that permits only certain substances and molecules to enter or exit the cell. The cell membrane is an illustration of a selectively permeable membrane. It permits only certain types of molecules to pass through diffusion and, on rare occasions, facilitated diffusion.
Cell response is the way a cell responds to a change in the environment. A cell response could be a physical change such as a change in shape or movement, or a chemical change such as a change in metabolism or the production of proteins or hormones. Cells process stimuli from the environment, either through receptors on the cell surface or internal signaling proteins. Once a response is triggered, cells can undergo various responses at the molecular, cellular, or organismal level. For example, when a foreign antigen is detected, a cell response can trigger an immune response such as inflammation. Alternatively, a cell response can be triggered by a hormone, which can induce cell differentiation or cell death.
Absorption is the process by which the digestive products are absorbed by the blood and distributed to the remainder of the body. The digested products are transported into the blood or lymph via the mucous barrier during absorption.
What is the cell structure of a typical plant cell?A typical plant cell consists of a cell wall (provides structure and protection), a plasma membrane (regulates what enters and leaves the cell), a nucleus (controls the cell's activities), cytoplasm (houses cellular organelles and dissolved materials), vacuoles (stores materials), and chloroplasts (site of photosynthesis).
A typical animal cell is made of a nucleus, cytoplasm, cell (plasma) membrane, mitochondria, and endoplasmic reticulum. The nucleus contains DNA and is the control centre of the cell; the cytoplasm is a jelly-like substance that contains salts, proteins, and enzymes; the cell membrane is a thin barrier controlling the exchange of materials between the inside and outside of the cell; the mitochondria are the 'powerhouse' of the cell, producing energy; and the endoplasmic reticulum is a series of folded membranes that assist in protein synthesis and transport.
To know more about inflammation , visit ;
https://brainly.com/question/608378
#SPJ1
the initial concentration of acid ha in solution is 1.7 m. if the ph of the solution at equilibrium is 2.20, what is the percent ionization of the acid?
The percent ionization of the acid is 0.37%.
Percent ionization is the fraction or percentage of a weak acid or base that dissociates into ions in solution. It is calculated by dividing the concentration of the ionized species (either H⁺ or OH⁻) by the initial concentration of the weak acid or base and multiplying by 100%.
The percent ionization of the acid can be calculated using the following equation; % ionization = [H⁺]/[HA] x 100%
where [H⁺] is the concentration of the hydronium ion at equilibrium and [HA] is the initial concentration of the acid.
First, we need to calculate the concentration of the hydronium ion at equilibrium using the pH;
pH = -log[H⁺]
2.20 = -log[H⁺]
[H+] = [tex]10^{(-2.20)}[/tex]
[H+] = 6.31 x 10⁻³ M
Next, we can calculate the percent ionization:
% ionization = [H⁺]/[HA] x 100%
% ionization = (6.31 x 10⁻³ M / 1.7 M) x 100%
% ionization = 0.37%
To know more about percent ionization here
https://brainly.com/question/13161344
#SPJ4
which of the following salts will be substantially more soluble in acidic solution than in pure water? (multiple answers are possible., choose all that apply. points deducted for incorrect choices. minimum score of zero.) group of answer choices pbcl2 al(oh)3 ba3(po4)2 agi fes hg2br2
Option A). The salts that will be substantially more soluble in an acidic solution than in pure water are PbCl₂, Al(OH)₃, and FeS.
1. Look for salts containing anions that can react with H+ ions from acidic solutions, making them more soluble. These anions include Cl-, OH-, S₂-, and PO₄₃-.
2. From the given choices, identify the salts containing these anions:
- PbCl₂ (contains Cl-)
- Al(OH)₃ (contains OH-)
- Ba₃(PO₄)₂ (contains PO₄₃-)
- FeS (contains S₂-)
3. Consider the cations' ability to form soluble complexes with the anions. Al₃+ and Fe₂+ can form soluble complexes with OH- and S₂-, respectively, while Pb₂+ can form soluble complexes with Cl-.
4. Based on this analysis, the salts that will be more soluble in acidic solutions are:
- PbCl₂
- Al(OH)₃
- FeS
For more such questions on salts
brainly.com/question/13818836
#SPJ11
WILL GIVE BRAINLIEST!!!!!!!!!!!!!!!!! PLEASE READ THE QUESTION CAREFULLY AND ANSWER THOROUGHLY!!!!!!!!!!
What are the properties of dihydrogen oxide? Please answer in 3-6 sentences.
Answer:
Hello again. dihydro gen-oxide is a colorless, tasteless, and odorless gas. It is insoluble in water. It is highly combustible. It is lighter than air. Its melting point is 13.96K. Its boiling point is 20.39K. Its density is 0.09 g/L.
Explanation:
Hope this helps! =D
Mark me brianliest! =D
Answer:
What are the physical properties of dihydrogen oxide?
Melting point: 32°F. Boiling point: 100°C. Density: 997 kg/m3. Chemical formula:
Explanation: