Please help me with this no wrong answer I am begging you please help me ASAP thanks

Answer:

Explanation:

If you are not told otherwise, you have to assume that the voltage source is ideal, meaning that it can maintain its voltage regardless of what resistances (or other loads) are in the circuit, and that it has the means to provide whatever current is necessary to maintain that voltage.

0

Okay, it's an interesting question. Your problem is right: the brightness stays the same.

First of all, I can't resist saying that I would expect 0 brightness haha. Because the circuit, as it is drawn, has no power sources. I guess the upper element is meant to be a voltage source. However, if you write "V" in the circle, that's the symbol of a volt-meter, not a power source. Consider changing the symbol for a battery or a voltage source.

After that comment, let's suppose the circuit consists in two lamps, a resistor and a voltage source, all of them in parallel.

The key is that

A voltage source provides a fixed voltage, but the current it provides is unknown, as it depends on the circuit to which it is attached.

That's the first idea. The second one is:

A lightbulb can be regarded as a resistance, at first level approximation.

That means that we have 3 resistances in paralell.

Two of those resistances are fixed (light bulbs). Constant voltage, and constant resistance, imply constant current.

[tex]IP=VRP;IQ=VRQ;[/tex]

The variable resistance allows changing the current through that resistance. Ivar=V/Rvar

But the total current is IP+IQ+Ivar. This is the current powered by the source. But the source is a voltage source, not a current one. A voltage source can have any current allowed by its components.

What is happening is that the current supplied by the source varies, in order to keep the voltage constant, which is the source's mission.

In other words,

Keeping the voltage constant requires a sacrifice: the current supplied by the source might vary.

But, as the voltage is the same for the bulbs, and intensities of the bulbs depend on the bulbs themselves (I=V/R), and they do not depend on the source, then of course the power dissipated in the bulbs is the same, and thus they have the same brightness.

This means that IP+IQ+Ivar=ITotal. Only Ivar and ITotal can vary. The bulbs' ones are fixed by Ohm's law.

Some more comments:

Of course, this is the ideal case. There is actually a range of currents that the source and the components can handle. Ideally, a voltage source can provide any current needed. In real life, this is not true. Real sources have a maximum current value.

Also, bulbs have a resistance that depends on the current, because their R depends on temperature.

If we didn't consider light bulbs as resistance, it would be a little more complicated, and different.

Hope this helps if not im sorry

Increasing internet speed and bandwidth will help to solve the latency issues. You'll need a network connection with a minimum speed of 15 mbps in order to use the internet efficiently.

Eventually, purchasing faster gear will be your best bet for obtaining lower latency. The system's overall latency can be considerably decreased by a faster CPU and GPU. Using the Reflex SDK's Game and Render latencies in games: If your Game Latency is excessive, think about getting a faster CPU.

In general, a latency (or ping) of 40 to 60 milliseconds (ms) or less is considered acceptable, whereas a speed of more than 100 ms will typically result in a significant lag in gaming. The performance of the game is affected by a number of variables.

the GPU, the HDD or SSD that the game is installed on, the amount and speed of RAM, the number of processing cores, and the speed of the disc.

To learn more about latency visit:

brainly.com/question/14894222

#SPJ4

Answer:

A micrometer caliper.

...............

The independent variable in this investigation is the type of surface which is changing whereas, the dependent variable is the mobility of earth worm.

In a experiment or investigation, there are two types of variables which are dependent and independent variable. Dependent variable are those which are dependent on other variables and are changing with respect to other variables.

Independent variables are those not dependent on any other variables and  we can change the independent variable to study the change in dependent variable.

Here, the one we studying is the mobility of earth worm which is the dependent variable and the type of surface rough or smooth is the independent variable.

Find more on independent variable:

https://brainly.com/question/1479694

#SPJ1

The height will the ball rise when a 0.50-kilogram ball is thrown upward is 5.1 meters.

Given,

Mass = 0.5 kg

Kinetic energy = 25 joules

Potential energy = mgh = 25

                              = 0.5 × 9.8 × h = 25

                               = 5.1 meters

In general, the work done by a force on an object between two points does depend on the path taken by the object between the two points. For the special case of conservative forces, we have seen that the work does not depend on the path.

Therefore, we can define, for conservative forces, an associated potential energy that, for a given object, depends only on its location. In particular, when a conservative force acts on an object as it moves between two points, we define the define the change in potential  energy associated with that force as minus the work done by that force between those two  points.

kinetic energy of the ball was equal to the work done by the gravitational force. By our definition, the change in gravitational potential energy is equal to minus the work done by the gravitational force.

To know more about energy here

https://brainly.com/question/13881533

#SPJ4

Answer:

W = 2625 N

Explanation:

(i)

Weight is defined as the force which acts towards the surface of the planet. It is the force that makes the object stay on the surface of the planet. Mathematically weight is defined as the product of the mass of the object with the value of acceleration due to gravity on the surface of that planet.

[tex]W = mg[/tex]

where,

(ii)

W = Weight of object = ?

m = mass of the object = 350 kg

g = 7.5 m/s²

Therefore,

[tex]W = (350\ kg)(7.5\ m/s^2)[/tex]

W = 2625 N

The baseball's momentum will be 2.75 m/s in magnitude. This is the accurate answer to the given problem.

Momentum and velocity are different in that momentum is a measurement of an object's amount of motion, whereas velocity is a measurement of an object's speed with direction. Velocity is one of the components of momentum since momentum is equal to an object's mass multiplied by its speed.

p = m v . The equation demonstrates that momentum is directly related to an object's mass (m) and velocity (v). As a result, an object's momentum increases with increasing mass or velocity. The momentum of a large, swift object is larger than that of a small, slower object.

P initial = (145g) x (45 m/s) = 6525 g*m/s

F = 0-6525/1.0s = -6525N

To learn more about momentum visit:

brainly.com/question/24030570

#SPJ4

Answer:

To determine the amount of energy released when 110 g of steam condenses, we can use the latent heat of vaporization formula, which states that the energy released is equal to the mass of the steam multiplied by the latent heat of vaporization. The latent heat of vaporization of water is 2256.7 J/g, so the energy released would be equal to 110 g x 2256.7 J/g = 248230 J. This value can be converted to kilojoules by dividing it by 1000, resulting in approximately 248.2 kJ.

It is important to note that the specific heat capacity and the change in temperature are not required to calculate the energy released during the condensation of steam. Instead, we only need the mass of the steam and the latent heat of vaporization. The latent heat of vaporization is a measure of the amount of energy required to change the state of a substance from a vapor to a liquid at a constant temperature, and it is specific to each substance.

Explanation:

Answer:

B and D

Explanation:

B (not the answer choice) is a hyperbole

Optical devices B and D can form only virtual images. Option C is correct.

When light beams from an object reflect off a mirror, they intersect with the picture of that thing, called an image. Real and virtual images are the two sorts of images.

The following parameters can be used to describe an image:

1. It is possible for an image to be real or virtual.

2. Left-right reversal is possible or not.

3. The image can be inverted or upright.

4. The image can be enlarged, shrunk, or made the same size as the object.

The image characteristic is described by the descriptive words will be;

1. image type.

2. image orientation.

3. image location.

4. image size.

Optical devices B and D can constitute only virtual images.

Hence, option C is correct.

To learn more about the image, refer to the link;

https://brainly.com/question/25029470

#SPJ2

The new period would be T/2.

The period of a simple pendulum is given by T = 2π √(L/g), where,

When the string is clamped at its midpoint, the length of the pendulum is effectively halved.

So the new period would be T' = 2π √(L/2g) =π √(L/g) = T/2.

Period of Simple Pendulum:

Learn more about Simple Pendulum here;

https://brainly.com/question/26449711

#SPJ4

The three laws of motion, as described by Sir Isaac Newton, are as follows:

Every object in a state of uniform motion will remain in that state of motion unless an external force acts on it. This is known as the law of inertia.

The force acting on an object is equal to the mass of that object multiplied by its acceleration. This is known as Newton's second law of motion, and is often represented by the equation F = ma.

For every action, there is an equal and opposite reaction. This is known as Newton's third law of motion.

Newton's laws of motion are fundamental principles that describe the physical behavior of objects in motion. The first law, the law of inertia, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity, unless acted upon by a net external force. The second law of motion, states that the acceleration of an object is directly proportional to the net force acting on the object, and inversely proportional to its mass. The third law states that for every action there is an equal and opposite reaction.

To know more about laws of motion  click below:

https://brainly.com/question/29775827#

#SPJ4

The correct option is A, the Sun's path, as viewed from the equator, is highest in the sky on the spring and fall equinoxes.

Fall equinox is an astronomical event that marks the transition from summer to autumn in the Northern Hemisphere and from winter to spring in the Southern Hemisphere. On the day of the fall equinox, the sun rises directly in the east and sets directly in the west. This marks the end of the summer season and the beginning of the autumn season. During the fall equinox, all areas of the Earth experience nearly the same amount of daylight and darkness.  

The fall equinox occurs in the middle of September in the Northern Hemisphere and in the middle of March in the Southern Hemisphere. It is the first day of autumn and the last day of summer in the Northern Hemisphere and the first day of spring and the last day of winter in the Southern Hemisphere.

The fall equinox marks the return of balance after the summer solstice, during which the days are the longest and the nights are the shortest. During the fall equinox, the day and night are of equal length and the sun is directly over the equator. After the fall equinox, the days become gradually shorter and the nights become gradually longer.

To learn more about Fall equinoxes visit here:

brainly.com/question/907434

#SPJ4

Answer:

W = m g = 80 kg * 9.80 m/s^2 = 784 N    using g = 9.80 m/s^2

W' = (W - .8 W) 80 = .2 W  = 157 N

W' = 80 kg * g' = 157 N    where g' is the reduced field

g' = 1.96 m / s^2

Answer:

Reliable predictions require precursors – some kind of signal in the earth that indicates a big quake is on the way. The signal has to happen only before large earthquakes and it has to occur before all big quakes. At the moment seismologists have failed to find those precursors – if they even exist.

Answer:

C.

Explanation:

Seems the most reasonable to me

We can calculate the speed of an object rolling motion a ramp by using the equation of motion in which we consider rolling and a tangential force acting on it.

Rolling motion occurs when an object rolls down over a height from the ramp or from any other sloppy or rough surface. the surface can be both smooth or rough, depending on it the friction acts on the object that is rolling over the ramp. we also consider the rolling tangential force in our calculation along with other forces when we tend to calculate the rest of the things. We can calculate the speed of an object rolling motion a ramp by using the equation of motion in which we consider rolling and a tangential force acting on it. Hence by this we can consider that we can calculate the rolling of any object by the equation of motion.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

The total horizontal force on the driver if the translational velocity around the same curve is 18 m/s is 215 N.

The word 'force' has a precise meaning. At this level, it is completely appropriate to describe a force as a push or a pull. A force is not something that an object contains or 'has in it'.

In  ∑F=m rv 2,

both m and r are unknown but remain constant.

Symbolically,

write ∑F slow​ =( r m​ )(14.0m/s) 2  

and ∑F fast​ =( r m​ )(18.0m/s) 2

Therefore, ∑F is proportional to v 2  and increases by a factor of ( 14.018.0​ ) 2  

as v increases from 14.0m/s to 18.0m/s.

The total force at the higher speed is then

∑F fast​ =( 14.018.0​ )

2 ∑F slow​ =( 14.018.0​ ) 2 (130N)

=215N

To know more about force visit:

brainly.com/question/13191643

#SPJ4

C. heat from radioactive decay.

Jupiter is a large gas giant and does not have a solid surface so the source of its heat is not from contraction or tidal heating.

Heat is generated from the radioactive decay of elements, such as uranium and thorium, in the interior of Jupiter which is the most likely explanation for the release of heat.

The heat released from the interior of Jupiter is believed to be generated from the radioactive decay of elements, such as uranium and thorium. These elements are naturally occurring, and their decay releases energy in the form of particles and radiation. This process produces the heat that is released from Jupiter's interior, which is why it is much hotter than the surrounding environment. The heat is also responsible for the hot spot that can be seen in Jupiter's atmosphere. It is estimated that the interior of Jupiter releases up to two and a half times more heat than it receives from the Sun. This process of radioactive decay is the most likely explanation for the release of such a large amount of heat from Jupiter's interior.

learn more about heat here

https://brainly.com/question/14515276

#SPJ4

A human lifetime of 80 years is equal to 29,200,000 seconds.

The average human lifetime is typically 79 years, although this can vary greatly depending on various factors such as lifestyle, genetics, and environment. Generally, most people can expect to live anywhere from their late 60s to their mid-80s. However, some people live much longer, and some much shorter. Even within the same family, the range of lifespans can be quite varied.

This can be calculated by multiplying the number of seconds in a day (86,400) by the number of days in a year (365) by the number of years in a human lifetime (80).
86,400 x 365 x 80 = 29,200,000 seconds

To learn about more human lifetime.
https://brainly.com/question/11105393
#SPJ4

Accenture is leveraging its advanced robotics capabilities to reduce emissions and achieve its sustainability goals.

What do you mean by Emissions?

Emissions are substances that are released into the environment, usually as a result of human activities. These substances can be in the form of gases, particles, or radiation, and they can be either natural or man-made. Common emissions include carbon dioxide, methane, and other greenhouse gases, as well as air pollutants such as volatile organic compounds (VOCs) and particulate matter.

Accenture is developing autonomous robots to reduce the carbon footprint of its operations, as well as to enable more efficient and low-emission operations. These robots are designed to be energy-efficient and require minimal human intervention. They can detect and diagnose potential issues in the system, such as air quality, temperature, and humidity, and can be used to automatically reduce energy consumption. Additionally, Accenture is also exploring the use of robotics to enable more energy-efficient production processes, such as 3D printing and additive manufacturing.

To know more about emissions,

https://brainly.com/question/30088186

#SPJ4

Answer:

False

Explanation

Poaching, habitat loss and diseases are contributing to the death of animals there, example: Gorilla

Answer:

false

Explanation:

The interval by which the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

The factor by which the office noise is related to the standard threshold of hearing is given by x = 10^(d/10), where d is the sound intensity in decibels. Since the decibel reading was consistently above 50 but never above 70, we can calculate the range of x using the following:

50 < d <= 70

10^(50/10) < x <= 10^(70/10)

To find the range of x, we need to calculate the 10^(50/10) and 10^(70/10)

10^(50/10) = 10^5 = 100000

10^(70/10) = 10^7 = 10000000

Therefore, the range of x, the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

Learn more about Threshold value here: https://brainly.com/question/726252

#SPJ4

Your question is incomplete but most probably the complete question is:

Sound intensity, in decibels, d, can be written using a comparison factor, x, that compares sound intensity to the standard threshold of hearing. d = 10log(x) A sensor measures the sound intensity, in decibels, of an office over time. The decibel reading was consistently above 50, but never above 70. On what interval is the factor by which the office noise is related to the standard threshold of hearing? (17, 18.5) (17, 18.5] (100,000, 10,000,000] (100,000, 10,000,000)

Answer:

Q = N e     total charge passing point

Q = 2.0E20 * 1.6E-19 coul = 32 coulombs

2)    I = Q / t = 32 C / 60 s = .53 amps

3)   R = V / i = 12 volts / .53 amps = 23 ohms

Answer:

46.98 kg m/s

Explanation:

P = mv

P = 5.8*8.1 = 46.98 kg m/s

It also assumes that many of your portrait are in focus. A wide aperture setup admits so much light into to the lens and lessens the depth of field.

A cameras is a piece of equipment that takes pictures and comprises of either a plate or light-sensitive film inside of a light-proof casing. The camera's shutters opens and closes during the taking of a picture, exposed the photosensitive film to sight and recording the scene on the film.

The traditional camera depicted in the illustration has been largely replaced by digital cameras and mobile phones today.

Less light enters the lens through a tiny aperture. Additionally, it suggests that more your photo will be sharp. More light enters the lens when the aperture is wide open, but the field of view is also reduced. You can change the aperture setting to help balance overall exposure and control the amount of the composition is already in focus.

To learn more about camera follow the given link:

brainly.com/question/7825772

#SPJ4

The potential energy of Nan suitcase of mass 14 kg is 54.88 J.

Potential energy is the energy of a body due to its position in the gravitational field.

To calculate the potential energy, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the potential energy is 54.88 J.

Learn more about potential energy here: https://brainly.com/question/14427111

#SPJ1

The turtle traveled 10 meters in 3,918.6 seconds using simple subtraction.

In mathematics, to subtract is to eliminate something from set of things or a group of things. When we remove from the group, the number of items falls or gets less. The minuend, forces at play, and difference are the elements of a subtraction problem.

It involves calculating the distinction between two numbers. The icon looks like this: (minus). In this operation, we take a particular number then split it by a fewer group. In other words, we divide one integer by another. Click here for some difficult addition and subtraction sums.

He gets a value of 4218.6 s

he discovers that the stopwatch had already been running for about 300 s

Time taken by turtle = 4218.6 - 300

= 3918.6 s

To learn more about subtraction from given link

https://brainly.com/question/28467694

#SPJ4

Kinetic energy: A) 1250 J: Velocity = √(2*1250/108) = 8.2 m/s, D) 1.2 kj: Velocity = √(2*1200/108) = 82 m/s and G) 90 kj: Velocity = √(2*90000/108) = 819 m/s.

Kinetic energy is the energy of motion. It is the energy an object has due to its motion. Kinetic energy can be calculated by multiplying half of an object's mass by the square of its velocity. Kinetic energy is a form of energy that is transferred between objects due to their motion. It is the energy of a moving object and is equal to the work done to accelerate the object from rest to its current velocity. Kinetic energy is associated with the motion of an object and is proportional to the square of its velocity. Kinetic energy is a form of energy that is associated with the motion of an object. It is the energy of a moving object and is equal to the work done to accelerate the object from rest to its current velocity.

To learn more about Kinetic energy
https://brainly.com/question/25959744
#SPJ1

You are standing on a moving bus, facing forward. You suddenly fall backward. You can imply from this that the bus's acceleration or speed has increased suddenly.

When the bus accelerates or speeds up suddenly, the inertia of your body causes you to fall backward. Inertia is the tendency of a body to resist changes in its state of motion. It is a basic principle of physics that states that an object in motion will remain in motion with the same speed and the same direction unless acted upon by an outside force. When the bus accelerates suddenly, the inertia of your body causes you to remain in the same position, while the bus moves forward. This results in you falling backward.

To know  more about acceleration  refer to the  link brainly.com/question/2303856

#SPJ4