Answer:
yeah the planet would go boom
The graph represents the amount of energy in the
reactants and products of a chemical reaction.
If total energy is conserved, which statement
explains why the energy of the reactants does not
equal the energy of the products?
Energy
Energy of Energy of
Reactants Products
A.
The reaction is exothermic
B. The reaction is endothermic.
C. The reaction requires a catalyst.
D
The reaction has a low activation energy.
Answer: The correct answer is in an exothermic reaction the energy of the product is less than the energy of the reactants.
Explanation: got it
The energy of reactants is not equal to that of products as the reaction is an exothermic reaction.
What is an exothermic reaction?
An exothermic reaction is defined as a chemical reaction which involves release of energy in the form of light,heat .In these reactions, energy is transferred from system to surroundings rather than taking energy from surroundings into system as in endothermic reactions.
In an exothermic reaction,change in enthalpy is negative.Therefore, it can be inferred that net amount of energy which is required to start the exothermic reaction is less than the net amount which is released by the reaction.
Examples of exothermic reactions are combustion reactions, detonation of nitroglycerin , neutralization reactions and nuclear fission.
Learn more about exothermic reactions,here:
https://brainly.com/question/28909381
#SPJ2
А
A and B are forces acting on a falling object. Which
force, A or B, represents gravity in the diagram?
Force 1
is gravity because it attracts the ball
to the ground.
B
Ground
Answer:
Force B
Explanation:
Gravity pulls "down" :D
Hoped this helped!
Have a nice day!
Calculate the molecular weight of chalk.Step by step
Answer:
100 g/mol
Explanation:
The chemical formula of chalk is CaCO3
So
1x Ca =40
1x C = 12
Ox 3 = 16
Meaning it has a molar mass of 100
matching will give brainliest. if you can answer any it help
1. element with atomic number greater than 92.
2. helium nucleus with and atomic number or 2 and a mass of 4.
3. unit for measuring exposure to radiation.
4. changing of one element to another due to alpha or beta decay.
5. caused by the decay of an electron.
6. atoms of the same element with different numbers of neutron.
7. the initial isotope before decay.
a. rem
b. alpha particle
c. beta particle
d. trans uranium element
e. transmutation
f. isotope
g. parent nuclide
Explanation:
In natural radioactive decay, three common emissions occur. When these emissions were originally observed, scientists were unable to identify them as some already known particles and so named them:
alpha particles ( α )
beta particles (β)
gamma rays (γ)
These particles were named using the first three letters of the Greek alphabet. Some later time, alpha particles were identified as helium-4 nuclei, beta particles were identified as electrons, and gamma rays as a form of electromagnetic radiation like x-rays, except much higher in energy and even more dangerous to living systems.
1. What is the modern view of electrons in the quantum mechanical model?
Answer: An electron con only exist in a limited number of quantized energy levels.
Explanation:
the bond between br atoms in a br2 molecule is
Answer:
COVALENT
Explanation:
covalent and is formed by the sharing of two valence electrons.
2. A small block of a metal with a mass of 223.1 grams when
submerged in a beaker containing water, the water level rises to
150.0 mL as shown in the figure here. If the density of the metal
block is 7.41 g/cm³ at 22°C, then what was the original water level
in the beaker?
Water leve
150 mL
The volume of the metal block can be calculated using the density and mass of the block is 30.0 cm³
What is metal block?A metal block is a solid piece of metal that is typically used for machining and other industrial applications. It is usually made from aluminum, steel, or other metals, and can be machined into a variety of shapes and sizes depending on the application. Metal blocks are also used for casting, forging, and other manufacturing processes. Metal blocks may also be used for decorative purposes, such as sculpture or engraving. They are also used in jewelry making and engraving, as well as in medical and dental applications.
The volume of the metal block can be calculated using the density and mass of the block:
Volume = Mass/Density = 223.1 g/7.41 g/cm³ = 30.0 cm³
Since the metal block was submerged in the water, the volume of the block will be added to the volume of water in the beaker. Therefore, the original water level in the beaker can be calculated using the following equation:
Original Water Level = 150 mL + (30.0 cm³/1000 cm³/mL) = 180.0 mL
To learn more about metal block
https://brainly.com/question/30142110
#SPJ1
HELP PLEASEUse the molar volume of a gas at SATP to determine the
following values at SATP:
(a) the amount of nitrogen in 44.8 L of pure gas
(b) the volume (in litres) of 4.8 mol of propane gas, C3H,(g)
(c) the mass of carbon dioxide in 34.6 L of carbon dioxide
gas, CO₂(g)
(d) the volume (in mL) of 1250 g of methane, CH₂(g)
(e) the amount of oxygen in 36.5 L of 02 gas
The most common example is the molar volume of a gas at standard temperature and pressure (STP), which is equal to 22.4 L for 1 mole of any ideal gas at 273.15 K and 1 atm of pressure.
What are the applications of the Ideal Gas Law- Molar Volume?Stoichiometry refers to the quantitative relationship between reactants and products. Calculating the quantities of reactants needed to make a given quantity of products, or the quantities of products resulting from a given quantity of reactants, is required in stoichiometric problems. Gas laws must be taken into account for the calculation if one or more reactants or products in a chemical reaction are gases. The findings of ideal gas law applications are often accurate to within 5%. We go over a few key ideas that are crucial for solving Stoichiometry Problems involving Gases in the sections below.
Stoichiometry and gas laws both rely on the mole notion as their foundation. A mole is an exact measurement of a substance. Based on the quantity of identities, a mole is a unit (i.e. atoms, molecules, ions, or particles). The number of identities in a mole of anything is equal to the number of atoms in exactly 12 grams of carbon-12, the most common isotope of carbon.
Learn more about Ideal Gas Law- Molar Volume: https://brainly.com/question/15132707
#SPJ1
The following statements are either true or false. Read each sentences carefully, then write TRUE faLSE
1. A force cannot be seen
2. A force cannot be felt.
3. A force always causes things to move
When an object is at rest, no gravitational force is acting on it
5 Gravitational force pulls all things downward
5. Mass and weight are the same quantities
7. All objects on Earth have weight
8 Some forces are useful to people
9. Gravity makes it easy for a person to ride a bicycle up
10. Weight is measured in grams (R) and kilograms
1) T
2) F
3) F
4) F
5) T
6) F
7) T
8) T
9) F
10) ...T... grams are usually in lowercase g
HELPP! pls
Consider the following reaction: _2_ Al + _6_ HBr → _2_ AlBr3 + _3_ H2
When 3.22 moles of Al reacts with 4.96 moles of HBr, how many moles of H2 are formed?
What is the limiting reactant?
What is the excess reactant?
Answer:
"2.48 mole" of H₂ are formed. A further explanation is provided below.
Explanation:
The given values are:
Mole of Al,
= 3.22 mole
Mole of HBr,
= 4.96 mole
Now,
(a)
The number of mole of H₂ are:
⇒ [tex]\frac{Mole \ of \ H_2}{3} =\frac{Mole \ of HBr}{6}[/tex]
or,
⇒ [tex]Mole \ of \ H_2=\frac{1}{2}\times Mole \ of \ HBr[/tex]
⇒ [tex]=\frac{1}{2}\times 4.96[/tex]
⇒ [tex]=2.48 \ mole[/tex]
(b)
The limiting reactant is:
= [tex]HBr[/tex]
(c)
The excess reactant is:
= [tex]Al[/tex]
Two clear solutions are placed in separate beakers. The first solution has a pH = 4, and the pH of the second solution is unknown.
If the two solutions are mixed and the resulting solution has a pH = 7, describe the second solution.
A) The second solution has a higher pH level than the first solution. It has a
pH that is weaker but still neutralized the first solution. It also has a higher
concentration of hydronium ions compared to the first solution.
B) The pH of the second solution is higher than the pH of the first solution. It
is also acidic and, therefore, has a higher concentration of hydroxide ions
compared to the first solution.
C) The second solution has a basic pH level. It was strong enough to
neutralize the first solution. It also has a higher concentration of hydroxide
ions compared to the first solution.
D) The second solution has and equivalent number of hydroxide and
hydronium ions. It has a pH level that is higher (stronger) than the first
solution.
Answer:
C.
Explanation:
When the pH is 7 there is equal amount of H+ and OH so the solution added must be strong enough to nuetralize the acid. So option A is out B is wrong because adding a acidic solution to an acidic solution wont nuetralize it, D is wrong because if the 2 solution was already equal in both it would essentaly be water. ALthough water would raise the pH it would not nuetralize it to a even 7.
Neera and Tom dissolved different masses of salt in 500 cm³ of water.
They measured the temperature at which each salt solution boiled.
salt
solution
(They wrote down the variables that might affect the investigation.
temperature of the
mass of salt
laboratory
dissolved in water
boiling point of
salt solution
thermometer
volume of water
starting temperature
of the water
type of salt used
The variables that might affect the investigation while dissolving different masses of salt are temperature and mass of the salt.
In the provided investigation, what are the independent and dependent variables?A variable that changed during the inquiry is regarded as an independent variable and is called "mass of salt dissolved in water." While the investigation's dependent variable, "boiling point of salt solution," is a variable that was monitored.
What are variables in a laboratory?There are numerous things that can be changed to see how they affect other things. Variables are the changeable quantities. Any element, character trait, or condition that can exist in a variety of forms or concentrations is a variable. Independent, dependent, and controlled variables are the three types of variables that often make up an experiment.
Learn more about temperature here:
brainly.com/question/15520591
#SPJ1
Neera and Tom dissolved different masses of salt in 500 cm3 of water.
They measured the temperature at which each salt solution boiled.
(a) They wrote down the variables that might affect the investigation.
temperature of the laboratorymass of salt dissolved in waterstarting temperature of the waterboiling point of salt solutionvolume of watertype of salt used(i) What is the independent variable (the variable they changed) in
their investigation?
(ii) What is the dependent variable (the variable they measured) in
their investigation?
(iii) Which variable above would affect the experiment the least?
Atoms bond by ______ electrons.
O gaining
O sharing
O losing
O all of the above
Which of the following best represents the structure of an amino acid in basic solution (pH = 11)?
Answer:
Explanation:
In basic solution (pH = 11), an amino acid typically exists in its zwitterionic form. This means that the amino acid has both a positive and a negative charge, due to the presence of both a basic amino group (-NH2) and an acidic carboxyl group (-COOH).
The structure of an amino acid in basic solution (pH = 11) can be represented as follows:
The central carbon atom (also known as the alpha carbon) is bonded to a hydrogen atom, an amino group (-NH2), a carboxyl group (-COOH), and a side chain R group.
The amino group is positively charged due to the loss of a proton (H+).
The carboxyl group is negatively charged due to the gain of a proton (H+).
Overall, the amino acid has a net charge of zero, due to the equal and opposite charges of the amino and carboxyl groups. This is known as the zwitterionic form of the amino acid.
Here is a visual representation of the structure of an amino acid in basic solution (pH = 11):
H |
N-C-COOH
|
R
Regenerate response
Q1. Describe the term "Displacement reaction"
0.0075mole of calcium trioxocrabonate IV is added to 0.015mole of a solution of hydrochloric acid .the volume of gas evolved at stp is
Answer:
1mole of gas at STP = 22.4dm3
0.0075 mole of CaCO3 = xdm3
cross multiply;
where 22.4dm3 = 22400cm3
x * 1 = 0.0075 * 22400 → 168cm3
the gas CO2 which evolved was gotten from CaCO3 so we use the number of moles of CaCO3 only
Why Zinc is not really considered as member of the transition metals?
The definition of a transition metal is that it must have an incompleted sub-level in one or more of its oxidation states. As zinc has a completed sub-level at all oxidative states, so it can't be considered a transition metal.
Which of the following statements is true?
A Protons are positively charged and have a mass of 1 amu.
B Electrons are negatively charged and have a mass of 1 amu
C. The nucleus of an atom is positively charged and never has a mass of 1 amu,
D. Neutrons are negatively charged and have a mass of 1 amu,
Answer: Correct option is (A)
Explanation:
Protons carry a single positive charge that have a mass of one approximately one atomic mass unit.
Answer:
B: its positively charged of 1 or 3 amu
Explanation:
Hope it works!!
How to solve this problem? I am stuck
The functional group of molecules as follows :
Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid. The image attached below show the functional group and molecules are labeled.
What is polar compound ?The polar compounds are those compound having different positive and negative charge, therefore the bonding with atoms such as nitrogen, oxygen, or sulfur.
A buffer is a solution the can control the pH change along with the addition of an acidic or basic substance. It is able to neutralize small amounts of added acid or base, So it maintains the pH of the solution. This is important to maintain pH ranges.
Thus, Molecule 1. is aldehyde and ketone, Molecule 2 is acid and thio, Molecule 3 is acid and amide, Molecule 4 is alcohol and ether, Molecule 5 is Alcohol and acid.
To learn more about the polar compound, follow the link;
https://brainly.com/question/29869649
#SPJ1
These are specially built to prevent waste chemicals from moving into the soil. As rainwater or groundwater moves through solid waste, it can dissolve or corrode some items. Plastic liners and compacted clay are used to prevent these solutions from entering the soil and the groundwater.
a
Sewage Treatment Facility
Sanitary landfill
c
Landfill
d
Effluent
Answer:
sanitary landfill is the answer
I need help with this
Answer:
the answer is the last one , sorry if im wrong.
Explanation:
A 6.8 L sample of gas is collected at a pressure of 0.91 atm. What will the Volume of the gas occupy at 1.0 atm if the temperature remains constant?
Answer:
Explanation:
V1*P1= V2*P2
6.8L*0.91atm=1.0atm*x
x=6.188 L
A 27 kg iron block initially at 375 C is quenched in an insulated tank that contains 130kg of water at 26 C. Assume the water that vaporizes during the process condenses back in the tank and the surroundings are at 12 C and 125 kPa. The specific heats of iron and water are 0.45 kJ/kgK and 4.18 kJ/kgK, respectively. a: Determine the final equilibrium temperature. b: Determine the entropy change of the combined system at the initial state. c: Determine the exergy of the combined system at the initial state. d: Determine the waste work potential during this process.
Solution :
a). Applying the energy balance,
[tex]$\Delta E_{sys}=E_{in}-E_{out}$[/tex]
[tex]$0=\Delta U$[/tex]
[tex]$0=(\Delta U)_{iron} + (\Delta U)_{water}$[/tex]
[tex]$0=[mc(T_f-T_i)_{iron}] + [mc(T_f-T_i)_{water}]$[/tex]
[tex]$0 = 27 \times 0.45 \times (T_f - 375) + 130 \times 4.18 \times (T_f-26)$[/tex]
[tex]$t_f=33.63^\circ C$[/tex]
b). The entropy change of iron.
[tex]$\Delta s_{iron} = mc \ln\left(\frac{T_f}{T_i} \right)$[/tex]
[tex]$ = 27 \times 0.45\ \ln\left(\frac{33.63 + 273}{375 + 273} \right)$[/tex]
= -9.09 kJ-K
Entropy change of water :
[tex]$\Delta s_{water} = mc \ \ln\left(\frac{T_f}{T_i} \right)$[/tex]
[tex]$ = 130 \times 4.18\ \ln\left(\frac{33.63 + 273}{26 + 273} \right)$[/tex]
= 10.76 kJ-K
So, the total entropy change during the process is :
[tex]$\Delta s_{tot} = \Delta s_{iron} + \Delta s_{water} $[/tex]
= -9.09 + 10.76
= 1.67 kJ-K
c). Exergy of the combined system at initial state,
[tex]$X=(U-U_{0}) - T_0(S-S_0)+P_0(V-V_0)$[/tex]
[tex]$X=mc (T-T_0) - T_0 \ mc \ \ln \left(\frac{T}{T_0} \right)+0$[/tex]
[tex]$X=mc\left((T-T_0)-T_0 \ ln \left(\frac{T}{T_0} \right)\right)$[/tex]
[tex]$X_{iron, i} = 27 \times 0.45\left(((375+273)-(12+273))-(12+273) \ln \frac{375+273}{12+273}\right)$[/tex]
[tex]$X_{iron, i} =63.94 \ kJ$[/tex]
[tex]$X_{water, i} = 130 \times 4.18\left(((26+273)-(12+273))-(12+273) \ln \frac{26+273}{12+273}\right)$[/tex]
[tex]$X_{water, i} =-13.22 \ kJ$[/tex]
Therefore, energy of the combined system at the initial state is
[tex]$X_{initial}=X_{iron,i} +X_{water, i}$[/tex]
= 63.94 -13.22
= 50.72 kJ
Similarly, Exergy of the combined system at initial state,
[tex]$X=(U_f-U_{0}) - T_0(S_f-S_0)+P_0(V_f-V_0)$[/tex]
[tex]$X=mc\left((T_f-T_0)-T_0 \ ln \left(\frac{T_f}{T_0} \right)\right)$[/tex]
[tex]$X_{iron, f} = 27 \times 0.45\left(((33.63+273)-(12+273))-(12+273) \ln \frac{33.63+273}{12+273}\right)$[/tex]
[tex]$X_{iron, f} = 216.39 \ kJ$[/tex]
[tex]$X_{water, f} = 130 \times 4.18\left(((33.63+273)-(12+273))-(12+273) \ln \frac{33.63+273}{12+273}\right)$[/tex]
[tex]$X_{water, f} =-9677.95\ kJ$[/tex]
Thus, energy or the combined system at the final state is :
[tex]$X_{final}=X_{iron,f} +X_{water, f$[/tex]
= 216.39 - 9677.95
= -9461.56 kJ
d). The wasted work
[tex]$X_{in} - X_{out}-X_{destroyed} = \Delta X_{sys}$[/tex]
[tex]$0-X_{destroyed} = $[/tex]
[tex]$X_{destroyed} = X_{initial} - X_{final}$[/tex]
= 50.72 + 9461.56
= 9512.22 kJ
Manganese is a transition metal. Consider the isotope: Mn-53. How many protons are in an atom of Mn-53 if the atom has a charge of 5?
Answer:
25
Explanation:
Isotopes of an element are the same element with different mass numbers but the same atomic number or the number of protons.
we know that in a balanced atom
Number of electrons = Number of protons = Atomic number
Atomic number (z) of manganese = 25
For Mn+5, the number of protons remains the same = 25
However, the number of electrons on Mn+5 = 21
Answer: 25
Explanation:
Given: Mg3N2 + 3 K2O → 3 MgO + 2 K3N
If 14 moles of potassium oxide, K2O, reacts, how many grams of potassium nitride, K3N, will be made? Show work
Explanation:
14 moles of potassium oxide, K2O, reacts, how many grams of potassium nitride, K3N, will be made? Show work
4.
Ethanol has a specific heat of 2.44 (J/g.°C). The temperature of 34.4 g of ethanol increases
from 25 °C to 78.8 °C. How much Heat was absorbed?
starting with calcium chloride describe how one can prepare calcium carbonate
What is the [H+] if [OH-] = 1 x 10-5 M?
Can someone help me with this pls
Answer:
i think the correct answer is A
why does water wet glass and not mercury