Explain the difference between an open and closed system in terms of matter and energy.

Answers

Answer 1

Explanation:

The stovetop example would be an open system, because heat and water vapor can be lost to the air. A closed system, on the other hand, can exchange only energy with its surroundings, not matter.


Related Questions

Original Claims: In general, what types of substances tend to be acidic?

Fruit Juices
Beverages (Coffee/Soda/Milk)
Cleaning Products
Digestive Juices
Answer in this format.

Restate original Claim here. This claim was ______ (supported/ not supported) by the claim because ________.(give a brief description of the correct claim using terms pH, COLOR and pH PAPER)

For example, from the evidence,_____ (use THREE specific examples from your evidence of the pH value and color of the pH paper to support your answer)

Answers

Restate original Claim here. This claim was supported by the claim because the evidence showed that acidic substances have a pH value less than 7 and cause the pH paper to turn a certain color.

What is pH?

pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm of the concentration of hydrogen ions (H+) in a solution. pH values range from 0 to 14, where 0 is the most acidic, 7 is neutral, and 14 is the most basic. A change of one unit in pH represents a tenfold change in the concentration of hydrogen ions.

For example, from the evidence, fruit juices such as lemon juice have a pH value of around 2-3 and turn the pH paper a red color, which indicates acidity. Beverages such as coffee and soda also have a low pH value, around 4-5, and turn the pH paper a slightly red color. Cleaning products such as vinegar have a pH value of around 2-3 and turn the pH paper a red color as well.

Learn more about pH from given link

https://brainly.com/question/26424076

#SPJ1

How many grams of solute are in the following solution?
250mL of 0.39M acetic acid, CH3CO2H

Answers

There are 5.85 grams of acetic acid (CH3CO2H) in the given solution.

To calculate the grams of solute in the given solution, we first need to calculate the number of moles of solute (acetic acid) present in the solution.

We know the volume of the solution (250 mL) and the molarity of the solution (0.39 M). We can use the following equation to calculate the number of moles of solute:

moles of solute = molarity × volume (in liters)

First, we need to convert the volume from milliliters to liters:

250 mL = 0.250 L

Now we can use the equation to calculate the number of moles of acetic acid:

moles of CH3CO2H = 0.39 M × 0.250 L = 0.0975 moles

Finally, we can use the molar mass of acetic acid to convert the number of moles to grams:

molar mass of CH3CO2H = 60.05 g/mol

grams of CH3CO2H = moles of CH3CO2H × molar mass of CH3CO2H

grams of CH3CO2H = 0.0975 moles × 60.05 g/mol = 5.85 g.

Learn more about acetic acid here:

https://brainly.com/question/15202177

#SPJ1

Consider the reaction. 2Pb(s)+O2(g)⟶2PbO(s) An excess of oxygen reacts with 451.4 g of lead, forming 338.4 g of lead(II) oxide. Calculate the percent yield of the reaction.

Answers

The reaction's per cent yield is  69.5%.

Calculation-

We must compare the actual yield of the reaction to the theoretical yield of the reaction to get the per cent yield of the reaction.

First, we need to calculate the amount of Pb reacted using the given mass of Pb:

mass of Pb = 451.4 g

The molar mass of Pb is 207.2 g/mol, so the number of moles of Pb reacted is:

moles of Pb = mass of Pb / molar mass of Pb

moles of Pb = 451.4 g / 207.2 g/mol

moles of Pb = 2.179 mol

The theoretical yield of PbO can be calculated using the molar mass of PbO:

mass of PbO = moles of PbO × molar mass of PbO

mass of PbO = 2.179 mol × 223.2 g/mol

mass of PbO = 486.6 g

Therefore, the theoretical yield of PbO is 486.6 g.

The per cent yield of the reaction is:

per cent yield = (actual yield / theoretical yield) × 100%

per cent yield = (338.4 g / 486.6 g) × 100%

percent yield = 69.5%

to know more about per cent yield here;

brainly.com/question/19463038

#SPJ1

A certain first-order reaction ( A→products
) has a rate constant of 8.70×10−3 s−1
at 45 ∘C
. How many minutes does it take for the concentration of the reactant, [A]
, to drop to 6.25 %
of the original concentration?

Answers

Answer:

time = 1.92 min

Explanation:

By knowing that

[tex]R_R = K_R [A]^{1} = \frac{[A]}{time}[/tex]  

Where: RR: rate of forward reaction, KR: rate constant, [A]: A concentration

in the previous equation, [A] is cancelled, then:

[tex]K_R = \frac{1}{time} \\ \\[/tex]


[tex]8.70\times10^{-3} = \frac{1}{time}[/tex]


Then, time = 114.94 seconds = 1.92 minutes


hope you find this easy to understand....

Have any questions? Write in the comments.

give me brainliest if you found this answer useful

How many milliliters (mL) of a 0.310 M NaOH solution are needed to neutralize 10.0 mL of 0.115 M H2SO4

Answers

10.0 mL of 0.115 M [tex]H_2SO_4[/tex] needs to be neutralised with 0.370 mL of a 0.310 M NaOH solution.

Calculate how much 0.310 M NaOH is required to neutralise 10.0 mL of 0.115 M [tex]H_2SO_4[/tex] in millilitres, we can apply the following formula:

Moles of [tex]H_2SO_4[/tex] = (Concentration of [tex]H_2SO_4[/tex])(Volume of [tex]H_2SO_4[/tex])

Moles of [tex]H_2SO_4[/tex] = (0.115 M)(10.0 mL) = 0.00115 moles

Since the reaction is 1 mole of [tex]H_2SO_4[/tex] to 2 moles of NaOH, we must have 0.00115 moles of NaOH to neutralize the [tex]H_2SO_4[/tex].

Moles of NaOH = (Concentration of NaOH)(Volume of NaOH)

0.00115 moles = (0.310 M)(Volume of NaOH)

Volume of NaOH =[tex]\frac{ 0.00115 moles}{0.310 M } = 0.370 mL[/tex]

Therefore, 0.370 mL of a 0.310 M NaOH solution are needed to neutralize 10.0 mL of 0.115 M [tex]H_2SO_4[/tex].

learn more about Moles Refer:brainly.com/question/26416088

#SPJ1

What is the normality of the solution that results when 4.0g of Al(NO3)3 (MW = 213.0) is dissolved in enough water to give
250mL of solution? What is the molarity of the solution?

Answers

the normality of the solution that results when 4.0g of Al(NO₃)₃ (MW = 213.0) is dissolved in enough water to give 250mL of solution the molarity of the solution is 0.0751 M.

To calculate the normality and molarity of the solution, we need to know the number of moles of Al(NO₃)₃ in the solution.

The number of moles can be calculated as:

moles = mass / molar mass

where mass is the mass of Al(NO₃)₃ and molar mass is the molecular weight of Al(NO₃)₃

Substituting the given values, we get:

moles = 4.0 g / 213.0 g/mol = 0.01878 mol

The volume of the solution is given as 250 mL, which is equivalent to 0.25 L.

The normality of the solution is defined as the number of equivalents of solute per liter of solution. For Al(NO₃)₃, each mole of the compound produces 3 moles of ions, so the number of equivalents of Al(NO₃)₃ is:

equivalents = moles x 3

Substituting the value of moles, we get:

equivalents = 0.01878 mol x 3 = 0.05634 eq

The normality can now be calculated as:

normality = equivalents / volume

Substituting the given values, we get:

normality = 0.05634 eq / 0.25 L = 0.225 N

Therefore, the normality of the solution is 0.225 N.

The molarity of the solution is defined as the number of moles of solute per liter of solution. The number of moles of Al(NO₃)₃ in 250 mL of solution is the same as the number of moles in 1 L of solution, which is 0.01878 mol. Therefore, the molarity of the solution is:

molarity = moles / volume

Substituting the given values, we get:

molarity = 0.01878 mol / 0.25 L = 0.0751 M

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ1

if you start with 2.196 g of salivic acid what is the theoretical yield of aspirin​

Answers

To determine the theoretical yield of aspirin, we need to know the balanced chemical equation for the reaction between salicylic acid and acetic anhydride, which produces aspirin and acetic acid. The balanced chemical equation is:

C7H6O3 + C4H6O3 → C9H8O4 + C2H4O2

From the balanced equation, we can see that the molar ratio between salicylic acid and aspirin is 1:1. Therefore, if we know the amount of salicylic acid used, we can determine the theoretical yield of aspirin.

The molar mass of salicylic acid is 138.12 g/mol and the molar mass of aspirin is 180.16 g/mol. Therefore, the number of moles of salicylic acid present in 2.196 g can be calculated as:

2.196 g / 138.12 g/mol = 0.0159 mol

Since the molar ratio of salicylic acid to aspirin is 1:1, the theoretical yield of aspirin would be 0.0159 mol.

The mass of this amount of aspirin can be calculated as:

0.0159 mol x 180.16 g/mol = 2.86 g

Therefore, the theoretical yield of aspirin is 2.86 g.

help please been asking for days LOLLL keep getting the wrong answers.

Answers

Answer:

22.24°C.

Explanation:

The change in temperature of the iron can be calculated using the formula: ΔT = Q / (m * c), where ΔT is the change in temperature, Q is the heat added, m is the mass of the substance and c is the specific heat capacity.

Substituting the given values into the formula: ΔT = 115 cal / (47.0 g * 0.11 cal/g⋅°C) ≈ 22.24°C

So, the change in temperature of the iron is 22.24°C.

forgot how to solve this​

Answers

The value of the equilibrium constant, Kc is 0.33.

The correct option is A.

What is the value of the equilibrium constant, Kc?

The balanced chemical equation for the oxidation of NO by O2 is:

2 NO (g) + O2 (g) → 2 NO2 (g)

From the stoichiometry of the equation, we see that the mole ratio of NO to O2 consumed is 2:1. Therefore, if 3 moles of O2 are present at equilibrium, then 1.5 moles of NO have been consumed:

1.5 moles NO = 15.0 moles NO (initial) - 3.0 moles NO2 - 3.0 moles O2

Using the law of mass action, we can express the equilibrium constant (Kc) for the reaction as:

Ke = ([NO2]^2 / [NO]^2 [O2])

We know that at equilibrium, [O2] = 3.0 moles / 1.0 L = 3.0 M. To calculate [NO2], we need to use the stoichiometry of the equation and the fact that 1.5 moles of NO are consumed at equilibrium:

2 mol NO → 2 mol NO2

1.5 mol NO → 1.5 mol NO2

Therefore, [NO2] = 1.5 mol NO2 / 1.0 L = 1.5 M. Substituting the values into the equilibrium constant expression, we get:

Ke = ([NO2]^2 / [NO]^2 [O2])

Ke = (1.5 M)^2 / (1.5 M)^2 (3.0 M)

Ke = 0.333

Therefore, the answer is (a) 0.33.

Learn more about equilibrium constant, Kc at: https://brainly.com/question/19340344

#SPJ1

sample gas has a pressure of 6.8 kPa at 539K. If the temperature decreases to 211K, then what will be the new pressure?

Answers

Gay-Lussac's Law-

[tex] \:\:\:\:\:\:\star\longrightarrow \underline{\sf \boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}}[/tex]

[tex] \:\:\:\:\:\:\star\longrightarrow \sf \underline{P_2=\dfrac{P_1 \:T_2}{T_1}}[/tex]

Where-

P₁ is the initial pressure.T₁ is the initial temperatureP₂ is the final pressure.T₂ is the final temperature  

As per question, we are given -

P₁ = 6.8 KPaT₁ =539 KT₂= 211K

Now that we are given all the required values, so we can put them into the formula and solve for P₂:-

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf P_2=\dfrac{P_1 \:T_2}{T_1}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf P_2=\dfrac{6.8\times 211}{539}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf P_2 = \dfrac{1434.8}{539}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf P_2 = 2.661966.........\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf\underline{ P_2 = 2.7 \:KPa}\\[/tex]

Therefore, If the temperature decreases to 211K, then the new pressure will become 2.7 KPa.

Which term describes the energy the reactant molecules must meet for a reaction to progress?
O average kinetic energy of reactants
O enthalpy
O activation energy
O average kinetic energy of products

Answers

Answer:

Activation Energy

Explanation:

Activation energy is the minimum amount of energy that reactant molecules must possess in order to undergo a chemical reaction. as it is necessary to break the bonds of between the molecules of the reactants.


hope you find this easy to understand....

Have any questions? Write in the comments.

give me brainliest if you found this answer useful

Activation Energy !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Part A
Identify the problem that the cold pack must address.

Answers

The cold pack is designed to address the problem of pain and swelling due to injury or inflammation.

What is cold pack?

A cold pack, also known as a cold compress, is a medical device designed to provide cold therapy to a specific area of the body. It typically consists of a gel-filled plastic bag or pouch that is placed in the freezer for a period of time to lower its temperature.

When applied to the affected area, the cold temperature helps to reduce blood flow, which in turn reduces inflammation, swelling, and pain. Cold packs are commonly used to treat minor injuries such as sprains, strains, and bruises, as well as to alleviate pain and swelling associated with chronic conditions like arthritis.

Learn about cold pack here https://brainly.com/question/7745193

#SPJ1

Label each change as gradual or rapid:
Hurricane = ________
Volcanic eruption = ________
Regrowth after volcanic eruption = ________
Flooding = ________
Seasonal changes = ________
Oceans increasing temperature = ________
Global warming = ________
Fire = ________

Answers

Hurricane = Rapid

Volcanic eruption = Rapid

Regrowth after volcanic eruption = Gradual

Flooding = Rapid

Seasonal changes = Gradual

Oceans increasing temperature = Gradual

Global warming = Gradual

Fire = Rapid

Answer:

rapid

rapid

gradual

rapid

gradual

gradual

gradual

rapid

Explanation:

you take a 25g chalk piece outside and draw for 5 min the chalk weighs 5g after how many molecules of chalk did you leave outside on the concreate. the chalk is CaCO3.

Answers

AnswerTherefore, you left approximately 1.202 x 10^23 molecules of CaCO3 on the concrete after drawing with a 25g chalk piece outside for 5 minutes.

Explanation:

To solve this problem, we need to use the concept of conservation of mass, which states that matter cannot be created or destroyed, only transformed from one form to another. Therefore, the total mass of the chalk before and after drawing must be equal.

The mass of the chalk before drawing is 25 g. After drawing for 5 minutes, the mass of the chalk is 5 g. Therefore, the mass of chalk that was used for drawing is:

25 g - 5 g = 20 g

Next, we need to convert the mass of the chalk used to the number of molecules. The molar mass of CaCO3 is 100.09 g/mol, which means that one mole of CaCO3 contains 6.022 x 10^23 molecules.

To calculate the number of molecules of chalk used for drawing, we can use the following steps:

Calculate the number of moles of CaCO3 used:

20 g / 100.09 g/mol = 0.1998 mol

Calculate the number of molecules of CaCO3 used:

0.1998 mol x 6.022 x 10^23 molecules/mol = 1.202 x 10^23 molecules

Order the following elements from most to least reactive.
sodium, carbon, krýpton
sodium, krypton, carbon
krypton, sodium, carbon
carbon, sodium, krypton

Answers

It is the least reactive of the three elements listed.  The correct order of elements from most to least reactive is:

sodium, carbon, krypton.

Sodium is a highly reactive metal and readily forms compounds with many other elements. It reacts vigorously with water and air, which is why it is stored in oil to prevent contact with moisture or oxygen.

Carbon is less reactive than sodium but can still undergo reactions, such as combustion or oxidation. Krypton, on the other hand, is a noble gas and is chemically inert, meaning it does not react with other elements under normal conditions. Therefore, it is the least reactive of the three elements listed.

To know more about highly reactive metal , visit:

https://brainly.com/question/22929949

#SPJ1

What volume will 1.02 mol of carbon monoxide gas occupy at STP?

Answers

1.02 mol of carbon monoxide gas will occupy a volume of approximately 22.8 liters at STP.

At STP (standard temperature and pressure), the temperature is 273.15 K (0°C) and the pressure is 1 atmosphere (atm). The molar volume of a gas at STP is 22.4 L/mol.

Using the ideal gas law, we can calculate the volume of 1.02 mol of carbon monoxide gas at STP: PV = nRT

where:

P = pressure = 1 atm

V = volume (unknown)

n = moles = 1.02 mol

R = gas constant = 0.0821 L·atm/(mol·K)

T = temperature = 273.15 K

V = (nRT)/P

putting the values,

V = (1.02 mol)(0.0821 L·atm/(mol·K))(273.15 K) / (1 atm)

V = 22.4 L/mol

V = 22.8 L

To know more about carbon monoxide here

https://brainly.com/question/11608350

what is the current produced y 120 volts passing through a resistance of 0.2 ohms?

Answers

Ohm’s Law states:

V= I • R

where V is voltage (volts)
where I is current (amps)
and R is resistance (ohms)

Rearrange the equation to solve for current:

I = V/R

Now plug in what you know:

I = (120 volts)/(0.2 ohms)

Solve for I:

I = 600 amps

Hope this helps!

12. 50cm³ of alcohol is mixed with 50cm³ of water. The volume of the mixture is 97cm³. Which o the following is the best explanation for this observation red?​

Answers

The alcohol and water molecules sharing the same space leads to a more compact arrangement of the molecules in the combination, which is the best explanation for the observed drop in volume.

When alcohol and water are combined, what happens to the volume?

In this illustration, adding water to alcohol results in a final volume that is roughly 10% lower than the combined volumes of the two liquids. The "vanishing volume" results from variations in how the solvent molecules are packed in the mixture compared to the pure components.

Why does the volume drop when alcohol and water are combined?

Alcohol molecules slide into the spaces between the water molecules as it dissolves, reducing the volume.

To learn more about volume of alcohol visit:

brainly.com/question/29939079

#SPJ9

If 50cm³ of alcohol is mixed with 50cm³ of water. The volume of the mixture is 97cm³. What is the best explanation for this observation?

A. Water evaporates leading to decrease in volume of the mixture

B. Water and alcohol molecules react and form a compact solution

C. Alcohol being volatile evaporates and decreases the volume of the mixture

D. The alcohol and water molecules sharing the same space leads to the decrease in volume of the mixture

WORTH 50 POINTS, ANSWER ALL PARTS

For each of the following gemstones, determine the mass of compound present in the given moles of each compound.

PART A. The chemical formula for ruby is Al₂O₃. What is the mass in grams of ruby that are in 0.0924 moles?
PART B. The chemical formula for emerald is Be₃Al₂(SiO₃)₆. What is the mass in grams of emerald that are in 0.0165 moles?
PART C. The chemical formula for garnet is MgAl₂(SiO₄)₃. What is the mass in grams of garnet that are in 0.0380 moles?

Answers

Answer:

0.0924 mol Al₂O₃ = 9.42 g

0.0165 mol Be₃Al₂(SiO₃)₆ = 8.87 g

0.0380 mol MgAl₂(SiO₄)₃ = 13.5 g

Explanation:

mass = number of moles * molar mass

(PART A) The molar mass of Al₂O₃ is 101.96 g/mol. To find the mass in grams of Al₂O₃ that are in 0.0924 moles:

0.0924 mol * 101.96 g/mol = 9.42 g

(PART B) The molar mass of Be₃Al₂(SiO₃)₆ is 537.51 g/mol. To calculate the mass in grams of 0.0165 moles of Be₃Al₂(SiO₃)₆:

0.0165 mol * 537.51 g/mol = 8.87 g

(PART C) The molar mass of MgAl₂(SiO₄)₃ is 354.52 g/mol. To calculate the mass in grams of 0.0380 moles of MgAl₂(SiO₄)₃:

0.0380 mol * 354.52 g/mol = 13.5 g

The mass of ruby in grams is 9.43 g.
The mass of emerald in grams is 8.87 g.
The mass of garnet in grams is 16.56 g.


To calculate the mass of a compound in grams, we need to know the molar mass of the compound, which is the sum of the atomic masses of all the atoms in the formula. Once we know the molar mass, we can use the formula:

mass in grams = number of moles x molar mass

where the number of moles is given and the molar mass is calculated from the formula. In each case, we plug in the numbers and perform the calculation to obtain the mass in grams.


PART A: molar mass of Al₂O₃ is 101.96 g/mol (2 x 26.98 g/mol for Al and 3 x 16.00 g/mol for O).

As a result, the ruby mass in grammes is:

0.0924 moles x 101.96 g/mol = 9.43 g

PART B: The molar mass of Be₃Al₂(SiO₃)₆ is 537.54 g/mol (3 x 9.01 g/mol for Be, 2 x 26.98 g/mol for Al, 6 x 28.09 g/mol for SiO₃).

Therefore, The mass of an emerald in gram is :

0.0165 moles x 537.54 g/mol = 8.87 g

PART C: The molar mass of MgAl₂(SiO₄)₃ is 435.52 g/mol (1 x 24.31 g/mol for Mg, 2 x 26.98 g/mol for Al, 3 x 60.08 g/mol for SiO₄).

Therefore, the garnet mass in grams is :

0.0380 moles x 435.52 g/mol = 16.56 g

To know more about the Chemical, here

https://brainly.com/question/30228880

#SPJ1

I need help with these questions. If you help me i will mark you as most brainiest :) Thank you, have a great day!

Answers

Al, Cu, and Zn, Al are the metals in equations 1 and 2, respectively. Since aluminium is ranked higher on the activity series than copper, it can substitute for copper in chemical reactions.

Which metal in the experiment using metals and water reacts violently and ignites?

Metal and Water Reaction: An Introduction Because of the intense interactions that certain metals have with water, such potassium and sodium, they will ignite if left outside.

Which metal reacts slowly when exposed to cold water yet swiftly when exposed to steam?

Magnesium is therefore the most reactive of the listed metals, and as a result, its pace of reaction will be the quickest (to react with steam). Magnesium does not react with cold water, whereas metals with strong reactivity like potassium (K), sodium (Na), and calcium (Ca) do.

To know more about aluminium visit:-

https://brainly.com/question/25869623

#SPJ1

Plants capture the sun's energy and make food in the process of photosynthesis. Only about 0.1 percent of the sun's energy is captured by plants. Plants take carbon dioxide and water and, using the energy from sunlight, convert it into glucose (food) and oxygen. About one-half of the energy absorbed by plants is used right away. The other half is stored in plants as energy-containing food (carbohydrates).

A green maple leaf with the chemical equation of photosynthesis below it, its reactants above and to the left and its products to the right of it.
A green maple leaf with the chemical equation of photosynthesis below it. The chemical equation has reactants of coefficient 6, CO subscript 2, +, coefficient 6, H subscript 2, 0, a yields arrow with the label light above it and chlorophyll below it, and products of coefficient 6 C subscript 6, H subscript 12, 0 subscript 6, + coefficient 6 0 subscript 2. Above the leaf is a down arrow pointing to the center of the left. To the left of this arrow is a rain cloud labeled water and to the right is a beaming sun labeled light. To the left of the lead is a grey cloud of gas labeled carbon dioxide with an arrow pointing toward the leaf. To the right of the lead are two parallel arrows the top of which points to the label glucose and the bottom to the label oxygen.

2. How do you think energy from the sun ends up in the crust, tomato sauce, cheese, and meat on a slice of pizza?

Answers

The food chain that produces elements like the crust, tomato sauce, cheese, and meat on a pizza begins with the energy that plants absorb from the sun through photosynthesis.

What is photosynthesis?

Green plants, algae, and some microorganisms transform solar energy into chemical energy in the form of organic compounds like carbohydrates through a process called photosynthesis. Light energy is absorbed by pigments, chiefly chlorophyll, which is present in the chloroplasts of plant cells, during photosynthesis. Next, using this energy, glucose (a form of sugar) and oxygen are produced from carbon dioxide and water.

By photosynthesis, plants use the sun's energy to create carbohydrates (like glucose). Following the consumption of these carbohydrates by herbivores, predators subsequently consume these carbs, and so on.

When it comes to a pizza, the wheat used to form the crust was probably grown in a field where it employed photosynthesis to take in energy from the sun. Like with other vegetables used as toppings, the tomatoes used to prepare the sauce were probably also grown in a field. Pizza's cheese is formed from milk, which comes from cows who eat grass and other plants that have undergone photosynthesis to receive solar energy. Last but not least, any meat added as a garnish originated from creatures that also ate vegetables for fuel.

In a sense, the sun's energy, which plants use to produce food, including the components in a pizza, is eventually harnessed by photosynthesis.

To know more about photosynthesis, visit:

brainly.com/question/29775046

#SPJ1

CAN SOMEONE HELP WITH THIS QUESTION?✨

Answers

The molarity of the sodium hydroxide solution is 0.0911 M.

We must figure out how many molecules of potassium hydrogen phthalate there are.

moles of KHP = mass / molar mass = 0.600 g / 204.22 g/mol = 0.00294 mol

We know that 0.00294 moles of NaOH were used in the titration because one mole of KHP interacts with one mole of NaOH. This data can be used to determine the molarity of the NaOH solution:

molarity of NaOH = moles of NaOH / volume of NaOH used in liters

volume of NaOH = 32.21 mL = 0.03221 L

calculation of  the molarity of NaOH:

molarity of NaOH = 0.00294 mol / 0.03221 L = 0.0911 M

The molarity of the sodium hydroxide solution is 0.0911 M.

learn more about Molarity here

brainly.com/question/30404105

#SPJ1

What is the base conjugate acid pair in this balanced equation NH3+HNO3→NH4+ + NO3-

Answers

Answer:

The base conjugate acid pair is NH3 and NH4+.

NH3/NH4+

hope this helps!!

Discuss two pre-requisite skills needed for students to learn the process of writing balanced chemical and ionic equations​

Answers

Answer:

Explanation:Two pre-requisite skills needed for students to learn the process of writing balanced chemical and ionic equations are:

1. Understanding of the periodic table and elements: Students must have a solid foundation in the periodic table, including recognizing elements by their symbols and understanding their properties, groups, and electron configurations.

2. Knowledge of chemical bonding and compound formation: Students should be familiar with the different types of chemical bonds (ionic, covalent, and metallic) and know how to construct chemical formulas for compounds based on their component elements and valence electrons.

An unknown element contains 11 protons, 11 neutrons and 12 electrons, which of the following options do you think the unknown element is?

Answers

Answer:Sodium

Explanation:Sodium has 11 protons, 11 nuetrons, and 12 electrons

Standard vinegar solutions are about 5% acetic acid by mass. What is the molarity of a 5% vinegar solution? The molar mass of acetic acid is 60.052 g/mol. The density of the solution is 1.01 g/mL.

Answers

Explanation:

To calculate the molarity of the vinegar solution, we first need to calculate the number of moles of acetic acid present in one liter of the solution.

Since the density of the solution is 1.01 g/mL, one liter of the solution will have a mass of 1.01 kg.

The mass of acetic acid in one liter of the solution can be calculated as follows:

mass of acetic acid = 5% × 1.01 kg = 0.0505 kg

The number of moles of acetic acid can be calculated using its molar mass:

moles of acetic acid = mass of acetic acid / molar mass of acetic acid

moles of acetic acid = 0.0505 kg / 60.052 g/mol

moles of acetic acid = 0.000841 mol

Therefore, the molarity of the vinegar solution is:

molarity = moles of acetic acid / volume of solution in liters

molarity = 0.000841 mol / 1 L

molarity = 0.000841 M

So, the molarity of a 5% vinegar solution is approximately 0.000841 M.

Give the IUPAC name for: image attached ​

Answers

The IUPAC name of the given compound is 1-bromo-3-ethylpentane.

What are the steps involved in writing IUPAC name?

IUPAC (International Union of Pure and Applied Chemistry) naming is a system used to give standardized names to chemical compounds. The steps involved in doing IUPAC naming are as follows:

1. Identify the longest carbon chain: The parent chain is the longest continuous chain of carbon atoms in the molecule.

2. Number the carbon atoms: The carbon atoms in the parent chain are numbered starting from the end nearest to the substituent, and the substituents are given numbers based on the carbon to which they are attached.

3. Identify and name the substituents: Substituents are groups of atoms that replace hydrogen atoms on the parent chain. They are named according to their functional groups.

4. Write the name: The name of the compound is written by listing the names of the substituents in alphabetical order, along with their position on the parent chain.

5. Add prefixes and suffixes: Prefixes are added to indicate the number of substituents on the parent chain, and suffixes are added to indicate the functional group present.

6. Check the name: The final step is to check the name for accuracy and consistency with IUPAC rules.

It's important to note that the naming of complex organic compounds can involve additional rules and naming conventions beyond these basic steps.

Learn more about carbon here:

https://brainly.com/question/22530423

#SPJ9

How many moles of gas are in a 34.2 L container at 1 atm of pressure and 273.15 K?

Answers

Answer:

1.525834 (1.53 when accounting for significant figures).

Explanation:

This problem relies on the Ideal Gas Law, PV = nRT, where P is pressure, V is volume, n is moles, R is a specific constant, and T is temperature. In this problem, we are solving for n, moles, so we would rewrite it as n = PV/RT. Since the units here are moles, liters, atmospheres, and kelvin, R would be the value in atmosphere liter per mole kelvin, or 0.0821. From here, you just enter the values in the fraction and calculate.

For the significant figures, I followed the measurement of 34.2 L, giving 3, although an argument could be made for 1 significant figure from 1 atm, I imagine your professor would want something more specific than 2.

Need help with this please and thank you. PBS poisoned water student questions

Answers

When exposed to lead at high levels, the brain and central nervous system are attacked, resulting in unconsciousness, convulsions, and even death.

Future generations could be impacted by lead poisoning.

Lead poisoning affects up to 800 million children worldwide, or close to one third of all children. Lead has a negative impact on a child's developing brain, leading to diminished IQ, behavioral difficulties, and learning issues that can lower potential earnings as an adult.

How much lead is permitted by law in US drinking water?

The Safe Drinking Water Act (SDWA) reduced the maximum permitted lead level, or "lead-free" content, to a weighted average of 0.25 percent measured throughout the wetted surfaces of pipes, pipe fittings, plumbing fixtures, and fixtures, and 0.2 percent for solder and flux.

To learn more about lead poisoning visit:

brainly.com/question/3437008

#SPJ1

What are the toxic effects of lead? How can it affect the human body?

using the balanced chemical reaction equations, and the energies of the reactants and products, calculate the combustion of glucose O2 = 498kj/1 mol o2, 1598kj/1mol H2O = 934kj/1mol H2O, use correct units

Answers

One mole of glucose burns to produce several gases. [tex]6600kJ[/tex] of power. Another way to put it is that the burning of glucose releases  [tex]6600KJ/mol[/tex]  thermal energy.

What's a straightforward explanation of combustion?

A chemical reaction between two or more substances, typically containing oxygen, is called combustion. It results in the production of light and heat in the form of a flame.

The correct chemical formula for the burning of glucose

[tex]C6H12O6 + 6O2 \rightarrow  6CO2 + 6H2O[/tex]

We can determine the change in enthalpy for this reaction by using the values provided for the enthalpies of formation of the reactants and products:

Reactants:

[tex]C_6H_1_2O_6[/tex] : not given

[tex]O2: -498 kJ/mol \times 6 = -2988 kJ/mol[/tex]

Products:

[tex]CO_2[/tex]: not given

[tex]H2O -1598 kJ/mol \times 6 = -9588 kJ/mol[/tex]

[tex]\Delta H = (\epsilon products) - (\epsilon reactants)[/tex]

[tex]\Delta H = (-9588 kJ/mol + 0) - (0 + -2988 kJ/mol)[/tex]

[tex]\Delta H = -6600 kJ/mol[/tex]

Therefore, One mole of glucose burns to produce several gases. [tex]6600kJ[/tex] of power. Another way to put it is that the burning of glucose releases  [tex]6600KJ/mol[/tex]  thermal energy.

Learn more about combustion here:

https://brainly.com/question/15117038

#SPJ9

Other Questions
When you dissolve a non-volatile solute in a liquid ... (select all that are true)-a) The boiling point of the solution is less than the boiling point of the pure liquid solvent- b) The freezing point of the solution is less than the freezing point of the pure liquid solvent- c) The vapour pressure above the solution is greater than the vapour pressure above the pure liquid solvent- d) The vapour pressure above the solution is less than the vapour pressure above the pure liquid solvent-e) The boiling point of the solution is greater than the boiling point of the pure liquid solvent- f) The freezing point of the solution is greater than the freezing point of the pure liquid solvent labyrinth is a new, very successful, brand of organic clothing recently introduced globally. the company is unique in the way it has collaborated with its suppliers and potential customers to bring the clothing to market. labyrinth's founders have always focused on efficiency. what is the best advice you should give them, given the quick success they have had with labyrinth? A bowl contained 57.1 grams of salt. Then, Trey poured in another 24.24 grams. How much salt does the bowl contain now? Write a quadratic function in standard form that models the table. X -5 -3 -1 13 y 0 12 12 16 12 0 two bricks are stacked on a floor. a student draws the force diagram for brick 2, as shown above. the forces are an upward normal force, a downward force exerted by brick 1, and a downward gravitational force. how many of the forces, if any, in the force diagram are contact forces caused by microscopic interactions? While riding "The Screamer" (an unreliable ferris wheel with a radius of 100 feet) you start getting nervous about howhigh in the air you are...you estimate you're about 95 feet high in the air... how much could The Screamer have rotated(round to the nearest whole degree). There are 2 answers The growth in computer specialists was remarkable during 1960-1970 for both sexes. Calculate the percentages of growth for both sexes in this service occupation. (To the nearest whole percent.) Two sides of a triangle measure 12 and 10. Which inequalityshows all the possible lengths of the third side, x? 2. Ben is making two separate investments with his $2,400inheritance.He will invest $1,500 in Investment R which pays 2.75%annual simple interestHe will invest $900 in Investment S which pays 2.75%interest compounded annuallya. What is the difference between the balance of the twoinvestments after 8 years?b. What is the difference between the interest earned of the twoinvestments after 8 years?c. Which of the two had the better return on investment? At a schoolNumber of boys:number of girls=11:9There are 124 more boys to girlsWork out the total number of student at the school Dana had an equal number of red beads and yellow beads. After using 500 red beads to make necklaces, she had 3 times as many yellow beads as red beads. How many yellow beads does she have? I think of a number multiply it by 3 add 4 and get 22 identify the true statement about the extent to which commercial advertisements are protected by the first amendment. buys candy that costs 8$ per pound. She will spend less than 56$on candy. What are the possible numbers of pounds she will buy? Use for the number of pounds will buy. When Noah was born, his parents deposited $10900 into a savings account for his college fund. The savings account has a 3% annual percentage rate (APR). How old will Noah be when the account reaches $17000? Round down to the nearest whole number. j.p. morgan was a. the vice president of the united states in president cleveland's administration. b. known as the preeminent financial manipulator of the late nineteenth century. c. had a naive understanding of the global economy in the late nineteenth century. d. all of the above. A beam resting on two pivots has a length of L = 6.00 m and mass M = 90.0 kg The pivot under the left end exerts a normal force FN1 on the beam, and the second pivot placed a distance l = 4.00 m from the left end exerts a normal force FN2. A woman of mass m = 55.0 kg steps onto the left end of the beam and begins walking to the right, as in Fig. 3. The goal is to find the womans position when the beam begins to tip.(a) Sketch a free-body diagram of the beam with the woman standing x-meters to the right of the first pivot.(b) Where is the woman when the normal force F N 1 is the greatest?(c) What is FN1 when the beam is about to tip? (d) Use the force equation of equilibrium to find the value of FN2 when the beam is about to tip.(e) Using the result of part c) and the torque equilibrium equation, find the womans position when the beam is about to tip.(f) Check your answer by using a different axis of rotation. Question 1 of 10 Amal and Adam get in trouble in Mr. Piper's class because... (3 points) A. they were talking. B. they were passing a note. C. they were reading magazines. D. they were sleeping. In Harry Potter, the extraordinary world of wizards co-exists with the ordinary world of the Muggles. Write a 300 word essay about how the two worlds meet in this excerpt. Describe the function of this contrast in the story. Use examples from the text to support your answer. in terms of why they came to america, explain the difference between puerto rican immigrants and cuban and dominican immigrants