An empty cylindrical barrel is open at one end and rolls without slipping straight down a hill. The barrel has a mass of 15.0 kg, a radius of 0.400 m, and a length of 0.800 m. The mass of the end of the barrel equals a fourth of the mass of its side, and the thickness of the barrel is negligible. The acceleration due to gravity is =9.80 m/s2.
What is the translational speed f of the barrel at the bottom of the hill if released from rest at a height of 33.0 m above the bottom?

Answers

Answer 1

Hi there!

We can use work and energy to solve this problem.

We know that:

Ei = Ef

Ei = Potential energy = mgh

Ef = Rotational kinetic + Translational kinetic = 1/2Iω² + 1/2mv²

The barrel is comprised of a hollow cylinder and disk-shaped bottom, so:

I (hollow cylinder) = mr²

I (disk) = 1/2mr²

Calculate the moment of inertias of each.

Since the mass on the base is one-fourth of its side:

x = mass of side

x + x/4 = 15

4x + x = 60

5x = 60

x = 12 kg

end mass = 3 kg

Solve for each moment of inertia:

Side: (12)(0.4²) = 1.92 Kgm²

Bottom: 1/2(3)(0.4²) = 0.24 Kgm²

Side + bottom = 2.16 Kgm²

We can now solve:

mgh = 1/2mv² + 1/2(2.16)v²/r²

(15)(9.8)(33) = 1/2(15)v² + 1/2(13.5)v²

4851 = 14.25v²

v = 18.45 m/s


Related Questions

Velocity and Acceleration Quick Check

C

D

E

During which of the labeled time segments is the object moving forward but slowing down?

(1 point)

Ο Α

0 С

OD

ОВ

Answers

Answer:

Explanation:

1 Object C has an acceleration that is greater than the acceleration for D.

2 B

3 17M

4 The velocity is zero.

5 a straight line with negative slope

just took it

A 2457 kg car moves with initial speed of 18 ms-l. It is stopped in 62 m by its brakes.
What is the force applied by the brakes?

Answers

Answer:

Explanation:

The work of the brakes will equal the initial kinetic energy of the car

Fd = ½mv²

F = mv²/2d

F = 2457(18²) / (2(62))

F = 6,419.903...

F = 6.4 kN

The car on this ramp starts from rest. When released, it
accelerates at a constant rate. It has an initial position of 12 cm
from the top of the ramp, and has an average velocity of 1.20 m/s
for a total of 1.80 s. Which is the correct final position of the car?

Answers

Answer:

Explanation:

s 0.12 + 1.20(1.80) = 2.28 m from the top.

At the molecular level, as the kinetic energy increases, what happens to the temperature?

decreases

increases

stays the same

Answers

Answer: increases

Explanation:

Temperature is a measure of the average velocity of the molecular particles. The faster they go, the higher the temperature.

Just before it strikes the ground, what is the watermelon's kinetic energy?

Answers

Answer:

Answer: At its lowest point, the kinetic energy of a watermelon just as it touches the ground is zero if it does not touch anything on its way down.

Explanation:

This is because that upon having been dropped from a height, an object no longer has any kinetic energy at all. Kinetic energy transforms to gravitational potential energy during the fall and there's nothing left over for kinetic once you stop accelerating anymore. Fortunately, things don't stay still until they land very often! For example, if a person catches the fruit with his hands after some air resistance slows him down - making him more similar in speed to the lag of the trajectory - then he'll be able to share some of his saved up gravitational potential with that watermelon and do some

A thin piece of semiconducting silicon will be used to fabricate an electrical device. This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. Electrical contacts are placed at opposite ends of its length. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.

Required:
a. If the application of 1.0 volt to the contacts results in a current of 0.019 amps, what is the resistivity in (ohm-cm) of the material?
b. If the material's conductivity is due to doping with aluminum to a level of [Al]= 1x10^17 atoms/cm^3, what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material (assuming that the aluminum is fully ionized - i.e. all Al atoms donated electrons).

Answers

We have that for the Question "a)what is the resistivity in (ohm-cm) of the material? b) what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material"

Answer:

Resistivity = [tex]1.754 ohm-cm[/tex]Conductivity = [tex]6.25*10^{25} cm^3/V-s[/tex]

From the question we are told

This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.

 

A) Resistivity is given as,

[tex]p = \frac{RA}{l}[/tex]

where,

[tex]R = \frac{V}{I}[/tex]

Therefore,

[tex]p = \frac{VA}{Il}\\\\p = \frac{1*(0.1*0.5)}{0.019*1.5}\\\\p = 1.754 ohm-cm[/tex]

B) Conductivity is given as,

[tex]U = \frac{\rho}{pe}\\\\U = \frac{10^{17}}{10^{10}*1.6*10^{-19}}\\\\U = 6.25*10^{25} cm^3/V-s[/tex]

For more information on this visit

https://brainly.com/question/23379286

A crane is lifting a 500 lb car. If the power of the crane 1.82 hp, find the velocity of the car.​

Answers

Answer:

Explanation:

550 ft•lb/s / hp•(1.82 hp) / 500 lb = 2.00 ft/s

Uranus (mass = 8.68 x 1025 kg) and its moon Miranda (mass = 6.59 x 1019 kg) exert a gravitational force of 2.28 x 1019 N on each other. How far apart are they? cs [?] x 10?'m Coefficient (green) Exponent (yellow) Enter​

Answers

Answer:

Explanation:

F = GMm/d²

d = √(GMm/F)

d = √(6.674e-11(8.68e25)(6.59e19) / 2.28e19)

d = 1.29398e8 = 1.29 x 10^8 m  center to center

Answer:

1.29 x 10^8 m  apart

Explanation:

Works in Acellus!

A boat is using echo-sounding equipment to measure the depth of the water underneath it, as illustrated in the first diagram.

The equipment in the boat sends a short pulse of sound downwards and detects the echo after a time interval of 0.80s. i Describe how an echo is caused. ii The speed of sound in water is 1500 m/s. Calculate the distance travelled (in metres) by the sound in 0.80 s.

Answers

Answer:

Explanation:

Echo is caused by sound energy reflecting off of "hard" surfaces. It could be as simple as a change in density of the material the sound is traveling through.

In 0.8 s, the sound has traveled 0.8(1500) = 1200 m.

That means the object that reflected the sound is 600 m below the boat. The sound took 0.4 s to reach the object and another 0.4 s to return the echo.

What is a list of all the states of matter?

Answers

Answer:

3

Explanation:

state of matter are solid

liquid and

gases

Answer:

3

Explanation:

state of a matter are solid liquid and gas

How much distance does a car travel with a speed of 2m/s in 15 min?​

Answers

1800m because there 900 seconds in 15 minutes and 2*800=1800 so 1800m

Explanation:

1 minute is 60 seconds so you multiply 60 * 15 and then multiply that answer * 2

A merry-go-round of radius R, shown in the figure, is rotating at constant angular speed. The friction in its bearings is so small that it can be ignored. A sandbag of mass m is dropped onto the merry-go-round, at a position designated by r. The sandbag does not slip or roll upon contact with the merry-go-round.
The figure shows a top view of a merry-go-round of radius capital R rotating counterclockwise. A sandbag is located on the merry-go-round at a distance lowercase r from the center.

Rank the following different combinations of m and r on the basis of the angular speed of the merry-go-round after the sandbag "sticks" to the merry-go-round.

Answers

The angular speed of the merry-go-round reduced more as the sandbag is

placed further from the axis than increasing the mass of the sandbag.

The rank from largest to smallest angular speed is presented as follows;

[m = 10 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 20 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R]

              [tex]{}[/tex] ⇩

[m = 10 kg, r = 1.0·R]

Reasons:

The given combination in the question as obtained from a similar question online are;

1: m = 20 kg, r = 0.25·R

2: m = 10 kg, r = 1.0·R

3: m = 10 kg, r = 0.25·R

4: m = 15 kg, r = 0.75·R

5: m = 10 kg, r = 0.5·R

6: m = 40 kg, r = 0.25·R

According to the principle of conservation of angular momentum, we have;

[tex]I_i \cdot \omega _i = I_f \cdot \omega _f[/tex]

The moment of inertia of the merry-go-round, [tex]I_m[/tex] = 0.5·M·R²

Moment of inertia of the sandbag = m·r²

Therefore;

0.5·M·R²·[tex]\omega _i[/tex] = (0.5·M·R² + m·r²)·[tex]\omega _f[/tex]

Given that 0.5·M·R²·[tex]\omega _i[/tex] is constant, as the value of  m·r² increases, the value of [tex]\omega _f[/tex] decreases.

The values of m·r² for each combination are;

Combination 1: m = 20 kg, r = 0.25·R; m·r² = 1.25·R²

Combination 2: m = 10 kg, r = 1.0·R; m·r² = 10·R²

Combination 3: m = 10 kg, r = 0.25·R; m·r² = 0.625·R²

Combination 4: m = 15 kg, r = 0.75·R; m·r² = 8.4375·R²

Combination 5: m = 10 kg, r = 0.5·R; m·r² = 2.5·R²

Combination 6: m = 40 kg, r = 0.25·R; m·r² = 2.5·R²

Therefore, the rank from largest to smallest angular speed is as follows;

Combination 3 > Combination 1 > Combination 5 = Combination 6 >

Combination 2

Which gives;

[m = 10 kg, r = 0.25·R] > [m = 20 kg, r = 0.25·R] > [m = 10 kg, r = 0.5·R] > [m =

10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R] > [m = 10 kg, r = 1.0·R].

Learn more here:

https://brainly.com/question/15188750

Question: A NEO distance from the Sun is 1.18 AU. What is its relative speed compared to Earth (round your answer to 3 decimal places)

Answers

Its relative speed compared to Earth is 0.921

The speed of the object v = 2πr/T where r = radius of orbit and T = period of orbit.

Let v = speed of earth, r = radius of earth orbit = 1 AU and T = period of earth orbit.

So, v = 2πr/T

Also, v' = speed of NEO, r' = radius of NEO orbit = distance of NEO from sun = 1.18 AU and T' = period of NEO orbit.

So, v' = 2πr'/T'

v'/v = 2πr'/T' ÷ 2πr/T

v'/v = r'/r × T/T'

From Kepler's law, T² ∝ r³

So, T'²/T² = r'³/r³

(T'/T)² = (r'/r)³

T'/T =  √[(r'/r)]³

T/T' = √[(r'/r)]⁻³

So, substituting this into the equation, we have

v'/v = r'/r × T/T'

v'/v = r'/r × √[(r'/r)]⁻³

v'/v = √[(r'/r)]⁻¹

Since r' = 1.18 AU and r = 1 AU, r'/r = 1.18

So, v'/v = √[(r'/r)]⁻¹

v'/v = √[(1.18)]⁻¹

v'/v = [1.0863]⁻¹

v'/v = 0.921

So, its relative speed compared to Earth is 0.921

Learn more about NEO here:

https://brainly.com/question/24157038

If the voltage across a 5-F capacitor is 2*e^-3
V find the current and the power

Answers

Answer correct in this picture………….

Which is the most famous book of the philosopher Alexis karpouzos? I think it is the ''Cosmology, philosophy and physics''.

Answers

Answer: Yes, the " Cosmology, philosophy and physics" is the most famous book of the philosopher, Alexis karpouzos. But and the other books are important. For example, the " The self-criticism of science", the "Universal conscilusness" and the "Non-duality".

Explanation:

The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A

Answers

We have that for the Question "" it can be said that Calculate the moment which must be applied to the handle of the screw to raise the block is

M = 7.30 N.m

From the question we are told

The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A

Generally the equation for the Block is mathematically given as

[tex]\sum Fy=0[/tex]

[tex]981cos21.80 = R_2cos53.6\\\\R_2=1535N[/tex]

the equation for the Wedge is mathematically given as

[tex]\sum Fx=0\\\\1535cos36.4=Pcos21.8\\\\P=1331N[/tex]

the equation for the Screw is mathematically given as

[tex]\beta = tan^{-1}*\frac{L}{2*\pi*r} \\\\\beta = tan^{-1}*\frac{10}{2*\pi*(15)} \\\\\\beta = 6.06\\\\\theta = tan^{-1}*0.25 \\\\\theta = 14.04\\\\\\Therefore\\\\\theta + \beta = 20.1\\\\[/tex]

Therefore

[tex]M = Pr tan (\theta + \beta)\\\\M = 1331(0.015) tan20.09\\\\M = 7.30 N.m[/tex]

For more information on this visit

https://brainly.com/question/23379286

A stomp rocket takes 3.1 seconds to reach its maximum height.

- What is its initial velocity? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)

- What is its maximum height? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)

Answers

Answer:

Explanation:

Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

What is Velocity?

Velocity is defined as rate of change of position with respect to time.

SI unit of velocity is m/sec. Velocity is a vector quantity.

Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.

v = at

v = 9.8(3.1)

v = 30.38

v = 30 m/s

Max height can be found knowing the velocity is zero at the top of its flight.

v² = u² + 2as

s = (v² - u²) / 2a

s = (0.00² - 30.38²) / (2(-9.8))

s =  47.089

s = 47 m

So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.

To learn more about Velocity refer to the link:

brainly.com/question/18084516

 #SPJ5

calculate the surface area of a box whose mass is 200 kg and exerts a pressure of 100 Pascal on the floor.​

Answers

Answer:

Explanation:

If 2×2 is 4 so 1 kg can be 1 gram if it belive on it self some people change

What do alcohol, drugs, and tobacco all have in common?
All have some medicinal value.

All are harmful to the body.

All are depressants.

All are stimulants.

Answers

Answer:

all are harmful to the body

EXAM ENDS IN 30 MINS
PLSSS HELPPP ILL MAKE U BRAINLIEST

Answers

Explanation:

F = Icurrent×length×Bfieldstrength×sin(angle field to wire)

in our case

Icurrent = 10 A

length = 0.02km = 20 meters

B = 10^-6 T

angle = 30 degrees.

F = (20 A)(20m)(10^-6 T)×sin(30) = 400× 10^‐6 ×0.5 N =

= 200 × 10^-6 = 2 × 10^‐4 N

The amount of work done in example B is:​

Answers

Answer:

Explanation:

20 n is an unknown amount

If that is supposed to be 20 N(ewtons)

then W = Fd = 20(15) = 300 J

Answer: it will be 300 newton meters

Explanation:

MCQ
A body of mass 5kg is pushed for distance x with accleration a. Then workdone against static friction is

1.ma*X cosB
2.ma*X sinB
3.zero
4.ma/X​

Answers

Answer:

ma*XsinB

option 2 is correct

(f) As the pions move away from each other, the ratio of the absolute value of electric potential energy to the final total kinetic energy of the two pions changes. At some point, the potential energy becomes negligible compared to the final total kinetic energy . We can consider that the value of the ratio is about 0.01 when , where is the final total kinetic energy of the two pions. What will the distance, , between the pions be when this criterion is satisfie

Answers

The distance r between the pions when the criteria are satisfied is 1.45 × 10⁻¹⁶ m

If we consider the potential energy (U) between the pions, then (U) can be expressed as:

[tex]\mathbf{U = \dfrac{kq^2}{r} ---- (1)}[/tex]

Given that at some instance, the potential energy becomes negligible compared to the final K.E.

As such the conservation of the total energy in the system can be given as:

E = U + K

Again, if we consider the ratio of the potential energy to the kinetic energy to be about 0.01, then:

[tex]\mathbf{\dfrac{U}{K}= 0.01} \\ \\ \mathbf{U = 0.01 K----(2)}[/tex]

Equating both equations (1) and (2) together, we have:

[tex]\mathbf{\dfrac{kq^2}{r} = 0.01 K}[/tex]

[tex]\mathbf{\dfrac{kq^2}{r} = 0.01 \Bigg [ m_{o \pi}c^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{v_{\pi}^2}{c^2} }} \Big ] \Bigg] }[/tex]

[tex]\mathbf{r =\dfrac{kq^2}{ 0.01 \Bigg [ m_{o \pi}c^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{v_{\pi}^2}{c^2} }} \Big ] \Bigg] }}[/tex]

where:

r = distancek = Columb's constantq = charge on a protonm_o = rest mass of each pion in the previous questionc = velocity of light[tex]\mathbf{v_\pi}[/tex] = calculated velocity of proton in the previous question

Replacing their values in the  above equation, the distance (r) between the pions is calculated as:

[tex]\mathbf{r =\dfrac{(9\times 10^9 \ N.m^2/C^2) (1.6022 \times 10^{-19} \ C)^2}{ 0.01 \Bigg [ (2.5 \times 10^{-28\ kg } )\times (3\times 10^8 \ m/s)^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{(2.97 \times 10^8 \ m/s)^2}{(3 \times 10^8 \ m/s)^2} }} \Big ] \Bigg] }}[/tex]

distance (r) = 1.45 × 10⁻¹⁶ m

Therefore, we can conclude that the distance r between the pions when the criteria are satisfied is 1.45 × 10⁻¹⁶ m

Learn more about electric potential energy here:

https://brainly.com/question/21808222?referrer=searchResults

A 5 kg box is sitting on a rough wooden surface. The coefficient of static friction between the box and surface is 0.6. If the normal force on the box is 50 N, calculate the force of friction which must be overcome to move the box. Round your answer to the nearest whole number.

Answers

The force of friction needed to overcome to move the box is 29.4N

According to Newton's second law;

[tex]\sum F_x = ma_x\\[/tex]

Taking the sum of force along the plane;

[tex]F_m -F_f = ma\\F_m -F_f = 0\\F_m=F_f = \mu R[/tex]

This shows that the moving force is equal to the frictional force

Given that

[tex]\mu = 0.6\\R = mg = 49N[/tex]

Get the frictional force;

Since

[tex]F_f = \mu R\\F_f = 0.6 \times 49\\F_f = 29.4N[/tex]

Hence the force of friction needed to overcome to move the box is 29.4N

Learn more here: https://brainly.com/question/189856

Make one comparison between the moral condition of the world at the time of the Flood with our day. Only One Short explanation.

Answers

The moral condition of the world today appears to be worse than it was in the antediluvian era.

The biblical account of the flood records that the world delved into apostasy in the days of Noah so much so that God regretted the fact that he created man. Some of the evils of the antediluvian world include; sodomy, drunkenness, lewdness and several forms of immorality.

We can see that these vices that led to the destruction of the world due to moral bankruptcy in the antediluvian era is still very much prevalent in our world today. The moral condition of the world today appears to be worse than it was in the antediluvian era.

Learn more: https://brainly.com/question/8646601

A 1.1 kg ball drops vertically onto a floor, hitting with a speed of 23 m/s. It rebounds with an initial speed of 5.0 m/s. (a) What impulse acts on the ball during the contact

Answers

Hi there!

We know that:

I = Δp = m(vf - vi)

Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.

I = 1.1(5 - (-23)) = 30.8 Ns

A 2 kg ball is rolling down a hill at a constant speed of 4 m/s. How much kinetic energy does the ball have?

Answers

You do 0.5 x 2kg x 4 squared so

0.5x2x16

So the answer is 16

The oscillation of the 2.0-kg mass on a spring is described by x = 3.0 cos (4.0 t) where x is in centimeters and t is in seconds. What is the force constant k of the spring?

Answers

X is the answer because x can be any thing

The force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.

What is force?

Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.

Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.

Given:

The mass of the block, m = 2 kg,

The oscillation of spring, x  = 3 cos 4t,

Calculate the omega  by comparing the standard equation given below,

[tex]x = A cos \omega t[/tex]

ω = 4

Calculate the spring constant by the formula given below,

[tex]\omega = \sqrt{\frac{k}{m} }[/tex]

4² = k / 2

k = 32 N / m

Therefore, the force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.

To know more about Force:

https://brainly.com/question/13191643

#SPJ2

A mass vibrates back and forth from the free end of an ideal spring of spring constant 20 N/m with an amplitude of 0.30 m. What is the kinetic energy of this vibrating mass when it is 0.30 m from its equilibrium position?

Answers

Hi there!

We can begin by using the work-energy theorem in regards to an oscillating spring system.

Total Mechanical Energy = Kinetic Energy + Potential Energy

For a spring:

[tex]\text{Total ME} = \frac{1}{2}kA^2\\\\\text{KE} = \frac{1}{2}mv^2\\\\PE = \frac{1}{2}kx^2[/tex]

A = amplitude (m)

k = Spring constant (N/m)

x = displacement from equilibrium (m)

m = mass (kg)

We aren't given the mass, so we can solve for kinetic energy by rearranging the equation:

ME = KE + PE

ME - PE = KE

Thus:

[tex]KE = \frac{1}{2}kA^2 - \frac{1}{2}kx^2\\\\[/tex]

Plug in the given values:

[tex]KE = \frac{1}{2}(20)(0.3^2) - \frac{1}{2}(20)(0.3^2) = \boxed{0 \text{ J}}[/tex]

We can also justify this because when the mass is at the amplitude, the acceleration is at its maximum, but its instantaneous velocity is 0 m/s.

Thus, the object would have no kinetic energy since KE = 1/2mv².

Several common barometers are built using a variety of fluids. For which fluid will the column of fluid in the barometer be the highest

Answers

Answer:

the one in which the fluid has the lowest density

Other Questions
Scientific models can never be changed. true or false when emily, an american manager, became director of operations at the firms apparel factory in china, the tension mounted quickly due to misunderstandings and the extensive time needed to translate conversations between herself and the employees. emily is experiencing ________ conflict. Determine if the verb "gustar" will besingular or plural:Me___este carro.A. gustaB. gustanC.gusto What type of government would you want to have in your country and why i need geometry help... Jalil mixed3/8 cup of sugar with1of water. How many more cups of waterthan sugar did he use in his mixture? Which consequence of drug abuse most directly affects the community?finescriminal recordloss of driver's licenseo incarceration Find x value [tex] {x}^{3} + {x}^{2} + 8x + 12 = 0[/tex]?? Please help me I need help with this Both the Speaker of the House and the lieutenant governor help ensure that allies on committees are able to carry out their agendas. This is best known as which power? The sides of a rectangle are 6.3 cm and 4.8cm, each correct to 1 decimal place.Calculate the upper bound for the area of the rectangle. why are you whispering asked mary A Pump discharges water at 1MPaa and 165 deg C. Determine the specific volume and internal energy of the water at the discharge point. How was life in Ancient Rome What is 6 percent of 435000 Type the missing number in this sequence:5,12, 19,26, PLEASE HELP FOR BRAINLIESTSimplify. 7x + 3(x - 2) - 4x + 8 A) 6x + 2 B) 6x + 14 C) 6x - 2 D) 14x + 2 Select the atom that will attract the electron pair (:) more strongly (the atom with the greater electronegativity) HELP PLEASE Mr Denmark has 28 students in his class he wants to see them in seven equal rows how many students will be nitro buna, am nevoie de un site de facut proiecte