Answer:
Explanation:
550 ft•lb/s / hp•(1.82 hp) / 500 lb = 2.00 ft/s
từ độ cao h=2m một vật bắn lên với vận tốc ban đầu V0=10(m/s), hợp với phương ngang 1 góc 30 độ.Hãy xác minh
a. Thời gian chuyển động của vật ?
b. Độ lớn vận tốc tại điểm chạm đất
Answer:
A IS THE ANSWER
Explanation:
HOPE IT HELPS AND PLEASE MARK AS BRAINLIST
5 kg block of iron is heated to 800°C. It is placed in the tub containing 2 L of water at 15°C. Assuming all the water is brought to the boil rapidly, calculate the mass of water which boils off. (The specific heat capacity of iron 800°C is 220 J kg-1 K-1)
Answer:
Heat Loss = 5 kg * 700 deg K * 220 J / (kg*deg K) = 7.70E5 J
Since there are 4.186 J/cal
Heat Loss = 7.70E5J / 4.186 J/cal = 1.84E5 cal
Heat Gain = 2000 g * 85 deg K / cal / (deg K g) + M * 540 cal/g
Heat Gain = 1.70E5 cal + M * 540 cal/g
M = (1.84 - 1.70) E5 g / 540
25.9 g
25.9 g or 25.9 cm^3 or .0259 L of water will boil away
Why do you suppose Km values are so frequently standardized and published, drawing attention to the value of Vmax/2, rather than Vmax itself
Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.
The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).
This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.
An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).
In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.
Learn more in:
https://brainly.com/question/5182881
help me for a physics project please
Mister Brainly Please Help Me
Write 10 Information's About Sound
-cant travel through space since there's no molecules to travel through
-sound travels 4.3 times faster in water than air
-sounds are waves that pass through our ears via vibrations and travel by vibrations of molecules
-different types of sound like audible, inaudible, infrasonic, ultrasonic,
-sounds waves are either longitudinal, mechanical and pressure waves
-sound travels at 767 miles per hour
6) The modern atomic model is called the _____.
A) central atom model
B) plum pudding model
C) nuclear atomic model
D) electron growth model
The modern atomic model is called the nuclear atomic model.
Therefore the correct answer is option C.
What are atomic models?There are many types of atomic models proposed in past based on their individual assumptions and the experimentations
John Dalton's atomic model.
The Plum Pudding Model, developed by J.J. Thomson,
Rutherford's model provided an explanation for the presence of a nucleus inside the atom.
In accordance with the current atomic model, atoms have a nucleus made up of protons and neutrons and an ethereal gradient or cloud surrounding them that houses electrons;
The modern atomic model is called the nuclear atomic model.
Thus, the correct answer is option C.
To learn more about the atomic models here, refer to the link;
brainly.com/question/9145431
#SPJ2
What is the voltage if the current is 4 A and the resistance is 10 Ω?
Answer:
40 volts
Explanation:
Use the equation [tex]V=IR[/tex]
[tex]V=(4)(10)[/tex]
[tex]V=40[/tex]
73 ml of water is followed by 25 ml of juice. What is the percent strength of juice?
Total liquid: 73 + 25 = 98 ml
Percent juice = (25/98) x 100 = 25.5 %
b) A satellite is in a circular orbit around the Earth at an altitude of 1600 km above the Earth's surface. Determine the orbital period of the satellite in hours. [3]
Explanation:
The orbiting period of a satellite at a height h from earth' surface is
T=2πr32gR2
where r=R+h.
Then, T=2π(R+h)R(R+hg)−−−−−−−−√
Here, R=6400km,h=1600km=R/4
T=2πR+R4−−−−−−√R(R+R4g)−−−−−−−−−⎷=2π(1.25)32Rg−−√
Putting the given values,
T=2×3.14×(6.4×106m9.8ms−2)−−−−−−−−−−−−√(1.25)32=7092s=1.97h
Now, a satellite will appear stationary in the sky over a point on the earth's equator if its period of revolution around the earthh is equal to the period of revolution of the earth up around its own axis whichh is 24h. Let us find the height h of such a satellite above the earth's suface in terms of the earth,'s radius.
Let it be nR.Then
T=2π(R+nR)R(R+nRg)−−−−−−−−−−√
=2π(Rg)−−−−−√(1+n)32
=2×3.14(6.4×106m/s9.8m/s2)−−−−−−−−−−−−−−−⎷(1+n)32
(5075s)(1+n)32=(1.41h)(1+n)32
For T=24h, we have (24h)=(1.41h)(1+n)32
or (1+n)32=241.41=17
or 1+n(17)23=6.61
or n=5.61
The height of the geostationary satellite above the earth's surface is nR=5.61×6400km=6.59×104km.
a stone weight 490 N on a planet whose acceleration due to gravity is half that of the Earth. Calculate (1) the mass of a stone
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Acceleration due to gravity on that planet is half than that of om earth ~
that is ~
[tex] \dfrac{9.8}{2} \: \: m/ {s}^{2} [/tex][tex]4.9 \: \: m/s {}^{2} [/tex]And it's weight is equal to ~
[tex]490 \: \: N[/tex]now, As we know ~
[tex]f = m \times g[/tex]here ,
f = Weight = 490 Newtonsm = mass of stone = ?g = Acceleration due to gravity on that planet = 4.9 m/s²let find the mass of stone ~
[tex]490 = m \times 4.9[/tex][tex]m = \dfrac{490}{4.9} [/tex][tex]m = 100 \: \: kg[/tex]Mass of the stone is 100 kg ~
I hope it helped
1. How far does a train travel in the fourth second if it starts from rest with a uniform
acceleration of 2.0 m/s2?
Answer:
Explanation:
d = ½(2.0)4² - ½(2.0)3² = 7 m
1.25 is the closest to 1.04 or not I want to answer please. I think it's true, but I want to prove it scientifically, please.
Answer/Explanation:
It False, because if You Round Both of them..
1.25= 1.30
1.04= 1.00
it's like, 1 dollar and 4 cents; compared to 1 dollar and 25 cents. Obviously 25 cents is a lot more than 4 cents.
difference between speed and velocity
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Explanation:
Contrast the behavior of a water wave that travel by a stone barrier to a sound wave that travels through a door
calvin carter
Explanation:
here the file has everything
Which of the following can cause an object to accelerate?
Select one:
a. Force
b. Inertia
c. Mass
d. Kinetic Energy
I think force can accelerate
Explanation:
i think force of an object
Clothes stick together when you pull them out of the dryer because
clothing is a conductor.
clothing is an inductor.
they are not charged.
of static electricity.
Objects 1 and 2 attract each other with a gravitational force of 45 units. If the mass of Object 1 is doubled, then the new gravitational fore will be ______ units.
Explanation:
Fgravity = G*(mass1*mass2)/D²
so, if you double one of the masses, what does that do to our equation ?
Fgravitynew = G*(2*mass1*mass2)/D²
due to the commutative property of multiplication
Fgravitynew = 2* G*(mass1*mass2)/D² = 2* Fgravity
so, the correct answer will be 2×45 = 90 units.
Five ramps lead from the ground to the second floor of a workshop, as sketched below. All five ramps have the same height; ramps B, C, D and E have the same length; ramp A is longer than the other four. You need to push a heavy cart up to the second floor and you may choose any one of the five ramps.Assuming no frictional forces on the cart, which ramp would require you to do the least work?
The mechanical advantage of ramp A is greater than others and it will require the least force to move the load to greater distance.
Let the height of the ramp = hLet the length of ramp B, C, D and E = LLet the length of the ramp A = 2LThe mechanical advantage of the ramp is calculated as follows;
[tex]M.A = \frac{L}{h}[/tex]
The mechanical advantage of the ramp B, C, D and E is calculated as;
[tex]M.A = \frac{L}{h} \\\\[/tex]
The mechanical advantage of the ramp A is calculated as follows;
[tex]M.A = \frac{2L}{h} \\\\M.A = 2(\frac{L}{h} )[/tex]
Since the length of the ramp A is greater than other ramps, the mechanical advantage will be greater and it will require the least force to move the load to greater distance.
Learn more about mechanical advantage of ramps here: https://brainly.com/question/20367895
A 1.5 kg cart is attached to a spring with spring constant of 5 N/m. The cart & spring is pulled to stretch the spring by 3 meters.
What is the SPE?
22.5 J
Explanation:
Given:
x = 3 m
[tex]k = 5\:\text{N/m}[/tex]
The spring potential energy [tex]PE_s[/tex] is
[tex]PE_s = \frac{1}{2}kx^2 = \frac{1}{2}(5\:\text{N/m})(3\:\text{m})^2[/tex]
[tex]\:\:\:\:\:\:\:=22.5\:\text{J}[/tex]
A magnesium ion has a charge of +2 and an oxygen ion has a charge of –2. What is the chemical formula of the compound made of these ions? (correct answer gets brainliest)
A) Mg2O2
B) MgO
C) MgO2
D) Mg2O
It velocity of light scalar or vector equality
Answer:
velocity is a vector quantity
Explanation:
velocity is a vector quantity because it has a mass and a direction
The symbol delta x (x) is used to find what value?
Answer:
Explanation:
Δx means a change in the magnitude of the x variable, often used in reference to a number line on the horizontal axis of a plot.
why does air pressure decrease with increasing altitude?
what is the meaning of word thermodynamics
Answer:
physics that deals with the mechanical action or relations of heat.
The second hand on a clock is 3.00 cm long. What is the speed of the outermost tip of that second hand
In 60 minutes or 3600 seconds, the tip of the minute hand traverses the circumference of a circle with radius 3.00 cm, so it moves with a tangential speed of
(3.00 cm)/(3600 s) ≈ 0.00083 cm/s = 8.3 μm/s
A man applies a force of 540 N to the barrow in a direction 75 from the horizontal. He moves the barrow 30 m along the level ground. Calculate the work he does against friction?
The work done by the man against friction is 4,192.86 J.
The given parameters;
force applied, F = 540 Nangle of inclination, θ = 75⁰horizontal distance, x = 30 mThe work done by the man against friction is calculated as follows;
[tex]W = F \times d \times cos(75)\\\\W = 540 \times 30 \times cos(75)\\\\W = 4,192.86 \ J[/tex]
Thus, the work done by the man against friction is 4,192.86 J.
Learn more here:https://brainly.com/question/19498865
please help me with these four i dont rlly get the question itself tbh. 20 points
Explanation:
These prefixes are very commonly used in naming chemical compounds.
Di- means two.
For example, carbon dioxide's formula is be written as [tex]\text{CO}_2,[/tex] and it has 2 oxygen atoms, hence "di-oxide."
Tetra - means four.
For example, carbon tetrachloride's chemical formula is written as [tex]\text{CCl}_4[/tex], and there are four chlorine atoms
Deca- means ten
For example, lanthanum decahydride's chemical formula is written as [tex]\text{LaH}_{10}.[/tex] In this case there are 10 hydrogen atoms for every lanthanum atom.
Hepta - means seven
For example, iodine heptafluoride is written as [tex]\text{IF}_7[/tex]. Note the seven fluorine atoms attached to the iodine atom, hence the name "hepta-fluoride."
E TRUE OR FALSE: Write the word TRUE if the statement is correct, and FALSE if it is not. (3 points each). Write your answer on a separate sheet of paper. 1. Most EM waves has the same speed. 2. EM waves travel at the speed of 4x108 m/s. 3. Electromagnetic waves are transverse waves consisting of changing electric fields and changing magnetic fields. 4. Electromagnetic waves transfer energy through a vacuum. 5. A wave is a disturbance that transfers energy .what the answer?
Answer:
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
Explanation:
1. Most EM waves has the same speed. True
2. EM waves travel at the speed of 4x108 m/s. False
3. Electromagnetic waves are transverse waves consisting of changing electric fields and changing magnetic fields. True
4. Electromagnetic waves transfer energy through a vacuum. True
5. A wave is a disturbance that transfers energy. True
The figure shows a rear view of a loaded two-wheeled wheelbarrow on a horizontal surface. It has balloon tires and a weight W = 684 N, which is uniformly distributed. The left tire has a contact area with the ground of AL = 6.20 × 10-4 m2, whereas the right tire is underinflated and has a contact area of AR = 9.20 × 10-4 m2. Find (a) the force from the left tire, (b) the pressure from the left tire, (c) the force from the right tire, (d) the pressure from the right tire that each tire applies to the ground.
Answer:
Explanation:
Summing moments about the CG to zero will show that the two normal forces are equal and have a value of FL = FR = 684/2 = 342 N
Pressure on the left
PL = 342 / 6.20e-4 = 551,612.9032... = 5.5e5 Pa
Pressure on the right
PR = 342 / 9.20e-4 = 371,739.1304... = 3.7e5 Pa
A) The force from the left tire is; FL = 342 N
B) The pressure from the left tire is; PL = 551613 N/m²
C) The force from the right tire is; FR = 342 N
D) The pressure from the right tire is; PR = 371739 N/m²
We see that;
FL and FR are upward forces
W is the downward force.
We know that in equilibrium;
Sum of upward forces = sum of downward forces
Thus;
FL + FR = W
We are given W = 684 N
Since W is at the center, it means that FL = FR. Thus;
FL = FR = 684/2
FL = FR = 342 N
We are given;
Contact area of left tire; AL = 6.2 × 10⁻⁴ m²
Contact area of right tire; AR = 9.2 × 10⁻⁴ m²
Formula for pressure is;
Pressure = Force/Area
Pressure on the left tire;
PL = FL/AL
PL = 342/(6.2 × 10⁻⁴)
PL = 551613 N/m²
Pressure on the t right tire;
PR = FR/AR
PR = 342/(9.2 × 10⁻⁴)
PR = 371739 N/m²
Read more at; https://brainly.com/question/21584729
A race car, starting from rest, travels around a circular turn of radius 22.5 m. At a certain instant the car is still speeding up, and its angular speed is 0.541 rad/s. At this time, the car’s total acceleration vector (centripetal plus tangential) makes an angle of 39.0 with respect to the car’s velocity. What is the magnitude of the car’s total acceleration
Answer:
Explanation:
The answer:
https://www.chegg.com/homework-help/questions-and-answers/race-car-starting-rest-travels-around-circular-turn-radius-247-m-certain-instant-car-still-q402991
Total acceleration of car is 148.31 m/s².
What is centripetal acceleration?Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.
Given parameters:
Radius of the circular path: r = 22.5 m.
Angular speed: ω = 0.541 rad/s.
So, centripetal acceleration; α = ω²r = (0.541)² × 22.5 m/s² = 6.58 m/s².
Tangential acceleration: [tex]\alpha_t[/tex] = αr = 6.58 × 22.5 = 148.16 m/s².
Hence, total acceleration = √(α² + [tex]\alpha_t[/tex]²) = √(6.58² +148.16²) = 148.31 m/s².
Learn centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ2
3. A circular section of copper cable has a resistance of 0.50. What will be the resistance of a
copper cable of the same length but of twice its diameter?