The diameter change of the 50-ft spherical tank due to internal pressure of 100 psi is approximately 0.0214 inches.
To calculate the diameter change of the spherical tank, we can use the formula for the change in diameter due to internal pressure in a thin-walled sphere:
ΔD = (4 * E * ΔP * D) / (3 * (1 - ν^2) * t)
where:
ΔD is the change in diameter
E is the elastic modulus of the steel (30,000,000 psi)
ΔP is the internal pressure (100 psi)
D is the original diameter of the tank (50 ft)
ν is the Poisson's ratio of the steel (0.3)
t is the thickness of the steel plate (0.5 inches)
Plugging in the given values into the formula, we have:
ΔD = (4 * 30,000,000 * 100 * 50) / (3 * (1 - 0.3^2) * 0.5)
Simplifying the equation, we get:
ΔD = 0.0214 inches
Therefore, the diameter change of the 50-ft spherical tank due to the internal pressure of 100 psi is approximately 0.0214 inches.
Learn more about diameter
brainly.com/question/32968193
#SPJ11
What is the confusion matrix? What is it used for? Explain with examples.
What is the ROC curve? What is it used for? Explain with examples.
What is the measure for the evaluation of the probabilistic predictions? Explain with examples.
Answer:
be more clear and have no spelling errors
Step-by-step explanation:
be more clear next time
order fractions largest to smallest
19/9
2
5/6
7/4
2
2/3
Answer:
7/2 , 19/9, 2 , 2, 5/6, 2/3
Step-by-step explanation:
19/9 is 2.11
2=2
5/6=0.83
7/2= 3.5
2=2
2/3= 0.67
In applying the N-A-S rule for H3ASO4, N = A= and S =
Applying the N-A-S rule to [tex]H_3ASO_4,[/tex] we have N = Neutralization, A = Acid (H3ASO4), and S = Salt (depending on the counterions).
To apply the N-A-S (Neutralization-Acid-Base-Salt) rule for [tex]H_3ASO_4,[/tex] let's break down the compound into its ions and analyze the reaction it undergoes in aqueous solution.
[tex]H_3ASO_4[/tex] dissociates into three hydrogen ions (H+) and one arsenate ion [tex](AsO_4^3-).[/tex]
In water, it can be represented as:
[tex]H_3ASO_4(aq) - > 3H+(aq) + AsO_4^3-(aq)[/tex]
Now, let's analyze the N-A-S components:
Neutralization: The compound [tex]H_3ASO_4[/tex] is an acid, and when it dissolves in water, it releases hydrogen ions (H+).
Therefore, N represents the neutralization process.
Acid: [tex]H_3ASO_4[/tex] acts as an acid by donating protons (H+) when dissolved in water.
Hence, A represents the acid.
Base: To identify the base, we look for a compound that reacts with the acid to form a salt.
In this case, water [tex](H_2O)[/tex] can act as a base and accepts the donated protons (H+) from the acid, resulting in the formation of hydronium ions (H3O+).
However, it is important to note that water is often considered a neutral compound rather than a base in the N-A-S rule.
Salt: The salt formed as a result of the neutralization reaction between the acid and base is not explicitly mentioned.
It would depend on the counterions present in the system.
For similar question on Neutralization.
https://brainly.com/question/15042730
#SPJ8
(c) A horizontal curve is designed for a two-lane road in mountainous terrain. The following data are for geometric design purposes: = 2700 + 32.0 Station (point of intersection) Intersection angle Tangent length = 40° to 50° - 130 to 140 metre = 0.10 to 0.12 Side friction factor Superelevation rate = 8% to 10% Based on the information: (i) Provide the descripton for A, B and C in Figure Q2(c). (ii) Determine the design speed of the vehicle to travel at this curve. (iii) Calculate the distance of A in meter. (iv) Determine the station of C. A B 3 4/24/2 Figure Q2(c): Horizontal curve с
The design of a horizontal curve for a two-lane road in mountainous terrain involves various parameters. In Figure Q2(c), point A represents the beginning of the curve, point B denotes the point of intersection, and point C signifies the end of the curve. The intersection angle ranges from 40° to 50°, and the tangent length spans 130 to 140 meters. The side friction factor is between 0.10 and 0.12, and the superelevation rate is 8% to 10%. By considering these factors, we can determine the design speed of the vehicle, the distance of point A, and the station of point C.
Design speed determination:
The design speed is influenced by factors such as superelevation rate, curve radius, and side friction factor.To determine the design speed, various design criteria and formulas can be employed.Distance of point A:
The station represents a point along the road, typically measured in meters.As point A is the beginning of the curve, the distance can be calculated by subtracting the tangent length from the station at point B.Station of point C:
To determine the station of point C, we need to consider the tangent length and the length of the curve.By adding the tangent length to the station at point B, we can find the station of point C.The design of a horizontal curve for a two-lane road in mountainous terrain involves several key parameters, including the intersection angle, tangent length, side friction factor, and superelevation rate. By carefully considering these factors, it is possible to determine the design speed of the vehicle, the distance of point A, and the station of point C, enabling the creation of a safe and efficient road design.
Learn more about Curve :
https://brainly.com/question/31073442
#SPJ11
Romero Co., a company that makes custom-designed stainless-steel water bottles and tumblers, has shown their revenue and costs for the past fiscal period: What are the company's variable costs per fiscal period?
Therefore, Romero Co.'s variable costs per fiscal period (COGS) is $14,50,000.
Variable costs are such costs that differ with the changes in the level of production or sales.
Such costs include direct labor, direct materials, and variable overhead. Here, we have been given revenue and costs for the past fiscal period of Romero Co. to find out the company's variable costs per fiscal period.
Let's see,
Revenue - Cost of Goods Sold (COGS) = Gross Profit
Gross Profit - Operating Expenses = Net Profit
From the above equations, we can say that the company's variable costs per fiscal period are equal to the cost of goods sold (COGS).
Hence, we need to find out the cost of goods sold (COGS) of Romero Co. in the past fiscal period.
The formula for Cost of Goods Sold (COGS) is given below:
Cost of Goods Sold (COGS) = Opening Stock + Purchases - Closing Stock
The following data is given:
Opening stock = $3,00,000
Purchases = $14,00,000
Closing stock = $2,50,000
Now, let's put these values in the formula of Cost of Goods Sold (COGS),
COGS = $3,00,000 + $14,00,000 - $2,50,000= $14,50,000
Therefore, Romero Co.'s variable costs per fiscal period (COGS) is $14,50,000.
To know more about company visit:
https://brainly.com/question/30532251
#SPJ11
FOR n=2 prove it
Use mathematical induction to prove 2+6+18+...+2x3 =3"-1 for n=1,2 (LHR on he neglected, then show tha
Given the series `, the aim is to prove the statement `3^n - 1` fo`.The formula to be proved is n = 3^n - 1`.
First, check whether the formula is true for `n = 1`.
When `n = 1`,
we have `2 + 6 = 8` and
3^1 - 1 = 2`.
The formula is true for `
n = 1`.
Now, assume that the formula is true for `n = k`.
That is, we have`2 + 6 + 18 + ... + 2 × 3^k = 3^k - 1`.
Now, let's prove that the formula is also true for `n = k + 1`.
Therefore, for `n = k + 1`,
we have `2 + 6 + 18 + ... + 2 × 3^k + 2 × 3^(k + 1)`
Taking the formula that was assumed earlier for `n = k`,
we can replace the left-hand side of the above equation with `
3^k - 1`.
So we have `
3^k - 1 + 2 × 3^(k + 1)`
3^k - 1 + 2 × 3 × 3^k`
Simplify by adding the `3` and the `k` exponents.
`3^k - 1 + 2 × 3^(k + 1)`
Simplify by combining like terms and rearranging.
`3 × 3^k - 1 + 3^k - 1`
Now, we have
`3 × 3^k + 3^k - 2`.
To know more about series visit:
https://brainly.com/question/33356238
#SPJ11
The equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 is proven by mathematical induction for n = 1, 2.
To prove the given equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 for n = 1, 2 using mathematical induction, we need to follow these steps:
Step 1: Base case
For n = 1, we substitute n into the equation:
2 = 3^1 - 1
2 = 3 - 1
2 = 2
The equation holds true for n = 1.
Step 2: Inductive hypothesis
Assume that the equation holds true for some k = m:
2 + 6 + 18 + ... + 2x3 = 3^m - 1
Step 3: Inductive step
We need to prove that the equation holds true for k = m + 1:
2 + 6 + 18 + ... + 2x3 + 2x3^2 = 3^(m+1) - 1
To do this, we start with the left-hand side (LHS) of the equation for k = m + 1:
LHS = 2 + 6 + 18 + ... + 2x3 + 2x3^2
By the inductive hypothesis, we can rewrite the LHS as:
LHS = 3^m - 1 + 2x3^2
Using the formula for the sum of a geometric series, we can simplify the LHS further:
LHS = 3^m - 1 + 2x3^2
= 3^m - 1 + 18
= 3^m + 17
Now, let's look at the right-hand side (RHS) of the equation for k = m + 1:
RHS = 3^(m+1) - 1
By expanding the RHS, we get:
RHS = 3^m x 3 - 1
= 3^(m+1) - 1
The LHS and RHS are equal, so the equation holds true for k = m + 1.
Therefore, the equation 2 + 6 + 18 + ... + 2x3 = 3^n - 1 is proven by mathematical induction for n = 1, 2.
Learn more about mathematical induction
https://brainly.com/question/29503103
#SPJ11
Question:
Given that A = - log T, what is the corresponding absorbance for a solution that has 75% transmittance (T=0.75) at 595 nm?
The corresponding absorbance for a solution with 75% transmittance at 595 nm is 0.1249.
Absorbance (A) is defined as the negative logarithm of transmittance (T), i.e., A = -log(T). In this case, we are given that T = 0.75, representing 75% transmittance. To find the absorbance, we substitute this value into the equation:
A = -log(0.75)
Taking the logarithm of 0.75 using base 10, we can calculate the absorbance:
A ≈ -log10(0.75) ≈ -(-0.1249) ≈ 0.1249
Therefore, the corresponding absorbance for a solution with 75% transmittance at 595 nm is approximately 0.1249.
Learn more about Logarithms
brainly.com/question/30226560
#SPJ11
Consider a mat with dimensions of 60 m by 20 m. The live load and dead load on the mat are 100MN and 150 MN respectively. The mat is placed over a layer of soft clay that has a unit weight of 18 kN/m³ and 60 kN/m². Find D, if: Cu = a) A fully compensated foundation is required. b) The required factor of safety against baering capacity failure is 3.50.
b) In order to determine the value of D, additional information such as the bearing capacity factors (Nc, Nq, Nγ) or the ultimate bearing capacity (Qu) is needed.
To find the value of D, we need to calculate the ultimate bearing capacity of the mat foundation.
a) For a fully compensated foundation, the ultimate bearing capacity is given by:
Qu = (γ - γw) × Nc × Ac + γw × Nq × Aq + 0.5 × γw × B × Nγ
Where:
Qu = Ultimate bearing capacity
γ = Total unit weight of the soil (clay) = 18 kN/m³
γw = Unit weight of water = 9.81 kN/m³
Nc, Nq, Nγ = Bearing capacity factors (obtained from soil mechanics analysis)
Ac = Area of the loaded area (mat) = 60 m × 20 m
Aq = Area of the loaded area (mat) = 60 m × 20 m
B = Width of the loaded area (mat) = 60 m
Since the values of Nc, Nq, and Nγ are not provided, we cannot calculate the ultimate bearing capacity or the value of D for a fully compensated foundation.
b) For a required factor of safety against bearing capacity failure of 3.50, the allowable bearing capacity is given by:
Qa = Qu / FS
Where:
Qa = Allowable bearing capacity
FS = Factor of safety = 3.50
Again, without knowing the ultimate bearing capacity (Qu), we cannot calculate the allowable bearing capacity or the value of D for a factor of safety of 3.50.
To know more about factors visit:
brainly.com/question/14549998
#SPJ11
2 A 3.X m thick layer of clay (saturated: yday.sat = 20.X kN/m³; dry: Yclay.dry = 19.4 kN/m³) lies above a thick layer of coarse sand (Ysand = 19.X kN/m³;). The water table is at 2.3 m below ground level. a) Do you expect the clay to be dry or saturated above the water table?
We can conclude that the clay will be dry above the water table.
Given, A 3.X m thick layer of clay (saturated: yday.sat = 20.X kN/m³; dry: Yclay.dry = 19.4 kN/m³) lies above a thick layer of coarse sand (Ysand = 19.X kN/m³;).
The water table is at 2.3 m below ground level.
We need to find if the clay will be dry or saturated above the water table.
Now, we know that the water table is at 2.3m below the ground level.
Thus, the clay above the water table will be dry because there is no water present to saturate it.
Also, as the density of saturated clay (yday.sat = 20.X kN/m³) is greater than that of dry clay (Yclay.dry = 19.4 kN/m³), we know that the clay will only get heavier if it becomes saturated, but it will not affect its dryness.
Hence, we can conclude that the clay will be dry above the water table.
To know more about clay visit:
https://brainly.com/question/23325319
#SPJ11
2. A nozzle 3 m long has a diameter of 1.3 m at the upstream end and reduces linearly to 0.45 m diameter at the exit. A constant flow rate of 0.12 m3 /sec is maintained through the nozzle. Find the acceleration at the midpoint of the nozzle. Hint: velocity at any point is equal to the flow rate divided by the area of the pipe at that point. (Ans. a=0.02579 m/s/s]
To find the acceleration at the midpoint of a nozzle, calculate the velocities at the upstream end and exit, determine the time taken, and use the acceleration formula. The answer is approximately 0.02579 m/s².
To find the acceleration at the midpoint of the nozzle, we can use the equation:
a = (v₂ - v₁) / t
where v₁ is the velocity at the upstream end, v₂ is the velocity at the exit, and t is the time taken to travel from the upstream end to the midpoint.
First, let's calculate the velocities at the upstream end (v₁) and the exit (v₂):
v₁ = Q / A₁
v₂ = Q / A₂
where Q is the constant flow rate of 0.12 m³/sec, A₁ is the area at the upstream end, and A₂ is the area at the exit.
Diameter at the upstream end (D₁) = 1.3 m
Diameter at the exit (D₂) = 0.45 m
Length of the nozzle (L) = 3 m
Flow rate (Q) = 0.12 m³/sec
We can calculate the areas at the upstream end (A₁) and the exit (A₂) using the formula for the area of a circle:
A = π * (D/2)²
A₁ = π * (D₁/2)²
A₂ = π * (D₂/2)²
Now, we can substitute the values into the formulas to calculate the velocities:
v₁ = Q / A₁
v₂ = Q / A₂
Next, we need to determine the time taken to travel from the upstream end to the midpoint. Since the nozzle is 3 m long, the midpoint is at a distance of 1.5 m from the upstream end.
t = L / v
where L is the distance and v is the velocity. We can use the velocity at the midpoint (v) to calculate the time (t).
Finally, we can substitute the velocities and the time into the acceleration formula:
a = (v₂ - v₁) / t
By calculating these values, you can find the acceleration at the midpoint of the nozzle. The answer should be approximately 0.02579 m/s².
To learn more about acceleration visit:
https://brainly.com/question/25876659
#SPJ11
Question 4 Find the volume of the solid in the first octant (where x,y,z≥0 ) bounded by the coordinate planes x=0,y=0,z=0 and the surface z=1−y−x^2 (a good first step would be to find where the surface intersects the xy-plane, which will tell you the domain of integration).
The bounds of integration for the volume of the solid in the first octant are as follows:
x: -1 to 1
y: 0 to 1−x^2
z: 0 to 1−y−x^2
To calculate the volume, we can use a triple integral with these bounds:
V = ∫∫∫ dz dy dx
where the integration is done over the specified bounds.
To find the volume of the solid in the first octant bounded by the coordinate planes x=0, y=0, z=0, and the surface z=1−y−x^2, we can start by finding where the surface intersects the xy-plane. This will give us the domain of integration.
To find the intersection points, we set z=0 in the equation of the surface:
0 = 1−y−x^2
Simplifying this equation, we get:
y = 1−x^2
So, the surface intersects the xy-plane along the curve y = 1−x^2.
Now, we can find the bounds for integration in the xy-plane. The curve y = 1−x^2 is a parabola that opens downwards. To find the x-bounds, we need to find the x-values where the curve intersects the x-axis (y=0).
Setting y=0 in the equation y = 1−x^2, we get:
0 = 1−x^2
Rearranging this equation, we have:
x^2 = 1
Taking the square root of both sides, we get two solutions:
x = 1 or x = -1
Therefore, the x-bounds of integration are -1 to 1.
Now, we need to find the y-bounds of integration. Since the curve y = 1−x^2 is entirely above the x-axis, the y-bounds will be from 0 to 1−x^2.
Finally, the z-bounds of integration are from 0 to 1−y−x^2, as mentioned in the question.
To learn more about integration visit : https://brainly.com/question/30094386
#SPJ11
QUESTION 3 Find the integral. Select the correct answer. 0 1 5 sec 5x- - 1 - sec ³x + C 3 01 1 sec ³x + =sec ³x + C 3 5 1 sec c²x-sec ³x + C 7 5 01 1 sec²x + = sec ³x + C 7 5 tan ³x sec 5x dx
The integral of tan^3(x) sec(5x) dx is equal to (1/5) sec^3(x) + C, where C is the constant of integration.
To solve this integral, we can use integration by substitution. Let's consider the substitution u = sec(x), du = sec(x)tan(x) dx. We can rewrite the integral as:
∫ tan^3(x) sec(5x) dx = ∫ tan^2(x) sec(x) sec(5x) tan(x) dx.
Now, using the substitution u = sec(x), the integral becomes:
∫ (u^2 - 1) sec(5x) tan(x) du.
We can further simplify this integral as:
∫ u^2 sec(5x) tan(x) du - ∫ sec(5x) tan(x) du.
The first integral can be rewritten as:
(1/5) ∫ u^2 sec(5x) (5 sec(x)tan(x)) du = (1/5) ∫ 5u^2 sec^2(x) sec(5x) du.
Using the identity sec^2(x) = 1 + tan^2(x), we can simplify the first integral as:
(1/5) ∫ 5u^2 (1 + tan^2(x)) sec(5x) du.
Simplifying further, we have:
(1/5) ∫ 5u^2 sec(5x) du + (1/5) ∫ 5u^2 tan^2(x) sec(5x) du.
The first integral is simply:
(1/5) ∫ 5u^2 sec(5x) du = (1/5) ∫ 5u^2 du = (1/5) u^3 + C1.
The second integral can be rewritten using the identity tan^2(x) = sec^2(x) - 1:
(1/5) ∫ 5u^2 (sec^2(x) - 1) sec(5x) du = (1/5) ∫ 5u^2 sec^3(5x) du - (1/5) ∫ 5u^2 sec(5x) du.
The first integral is:
(1/5) ∫ 5u^2 sec^3(5x) du = (1/5) ∫ 5u^2 du = (1/5) u^3 + C2.
The second integral is:
-(1/5) ∫ 5u^2 sec(5x) du = -(1/5) ∫ 5u^2 du = -(1/5) u^3 + C3.
Combining all the results, we have:
∫ tan^3(x) sec(5x) dx = (1/5) u^3 + C1 + (1/5) u^3 + C2 - (1/5) u^3 + C3.
Simplifying further, we get:
∫ tan^3(x) sec(5x) dx = (1/5) (u^3 + u^3 - u^3) + C.
Therefore, the integral is equal to (1/5) sec^3(x) + C, where C is the constant of integration.
Learn more about equal here: brainly.com/question/29194324
#SPJ11
Solve the third-order initial value problem below using the method of Laplace transforms. y′′′+5y′′−2y′−24y=−96,y(0)=2,y′(0)=14,y′′(0)=−14 Click here to view the table of Laplace transforms. Click here to view the table of properties of Laplace transforms. y(t)= (Type an exact answer in terms of e.)
The given differential equation is y'''+5y''-2y'-24y = -96. We have to solve this differential equation using Laplace transform. The Laplace transform of y''' is s³Y(s) - s²y(0) - sy'(0) - y''(0)
The Laplace transform of y'' is s²Y(s) - sy(0) - y'(0) The Laplace transform of y' is sY(s) - y(0) Using these Laplace transforms, we can take the Laplace transform of the given differential equation and can then solve for Y(s). Applying the Laplace transform to the given differential equation, we get:
s³Y(s) - s²y(0) - sy'(0) - y''(0) + 5(s²Y(s) - sy(0) - y'(0)) - 2(sY(s) - y(0)) - 24Y(s) = -96Y(s)
Substituting the initial conditions, we get:
s³Y(s) - 2s² - 14s + 14 + 5s²Y(s) - 10sY(s) - 5 - 2sY(s) + 4Y(s) - 24Y(s) = -96Y
Solving for Y(s), we get:
Y(s) = -96 / (s³ + 5s² - 2s - 24)
Using partial fraction expansion, we can then convert Y(s) back to y(t). The given differential equation is
y'''+5y''-2y'-24y = -96.
We have to solve this differential equation using Laplace transform. The Laplace transform of y''' is
s³Y(s) - s²y(0) - sy'(0) - y''(0)
The Laplace transform of y'' is s²Y(s) - sy(0) - y'(0)The Laplace transform of y' is sY(s) - y(0) Using these Laplace transforms, we can take the Laplace transform of the given differential equation and can then solve for Y(s). Applying the Laplace transform to the given differential equation, we get:
s³Y(s) - s²y(0) - sy'(0) - y''(0) + 5(s²Y(s) - sy(0) - y'(0)) - 2(sY(s) - y(0)) - 24Y(s) = -96Y
Simplifying and substituting the initial conditions, we get:
s³Y(s) - 2s² - 14s + 14 + 5s²Y(s) - 10sY(s) - 5 - 2sY(s) + 4Y(s) - 24Y(s) = -96Y
Solving for Y(s), we get:
Y(s) = -96 / (s³ + 5s² - 2s - 24)
The denominator factors into:
(s+4)(s²+s-6) = (s+4)(s+3)(s-2)
Using partial fraction expansion, we can write Y(s) as:
Y(s) = A/(s+4) + B/(s+3) + C/(s-2)
Solving for A, B and C, we get: A = -4B = 7C = -3 Substituting the values of A, B and C in the partial fraction expansion of Y(s), we get:
Y(s) = -4/(s+4) + 7/(s+3) - 3/(s-2)
Taking the inverse Laplace transform, we get:
y(t) = -4e^(-4t) + 7e^(-3t) - 3e^(2t)
Hence, the solution of the given differential equation using Laplace transform is:
y(t) = -4e^(-4t) + 7e^(-3t) - 3e^(2t)
Using Laplace transform, we can solve differential equations. The steps involved in solving differential equations using Laplace transform are as follows: Take the Laplace transform of the given differential equation. Substitute the initial conditions in the Laplace transformed equation. Solve for Y(s).Convert Y(s) to y(t) using inverse Laplace transform.
To learn more about Laplace transform visit:
brainly.com/question/30759963
#SPJ11
ASSEMMENT 14 & 15 DRAW THE THREF VIEWS OF THESE TSOFETRIC THE LIPTH IS LBLOCKS, DEPTH 4 , HEKHT 4
The drawings should be clear and neat, indicating the measurements of the object.
This is to ensure that a person looking at the object can identify it from any angle.
Assessment 14 and 15 require the drawing of three views of a trapezoidal prism with a lip block, a depth of 4, and a height of 4. The three views that need to be drawn include the front view, top view, and the right-side view.
A front view is a two-dimensional representation of the front portion of an object, showing its length and height. The top view is a representation of the top of an object, showing its length and width, while the right-side view shows the right side of the object, indicating its width and height.
To begin the drawing of the three views of the trapezoidal prism with a lip block, we must first sketch out the shape of the prism. A trapezoidal prism consists of two identical trapezoids, one on the top and the other at the bottom, connected by four rectangles on each side. Here are the steps to follow:
Step 1: Sketch the front view of the prism with a lip block, depth of 4, and height of 4. Ensure to use a scale.
Step 2: Sketch the top view of the prism with a lip block, depth of 4, and height of 4. Ensure to use a scale.
Step 3: Sketch the right-side view of the prism with a lip block, depth of 4, and height of 4. Ensure to use a scale.
To know more about trapezoidal visit:
https://brainly.com/question/32048079
#SPJ11
students are playing a games. The blue team need to advance the ball at least 10 yards to score any points. Which inequality shows this relationship, where x is the number of yards the blue team needs to advance the ball to score any point?
The inequality x ≥ 10 represents the relationship where the blue team needs to advance the ball at least 10 yards to score any points.
The inequality that represents the relationship for the blue team needing to advance the ball at least 10 yards to score any points can be expressed as:x ≥ 10
In this inequality, x represents the number of yards the blue team needs to advance the ball. The "≥" symbol indicates "greater than or equal to," meaning that the blue team must advance the ball by at least 10 yards to score any points.
If the blue team advances the ball exactly 10 yards, the inequality is satisfied because it meets the minimum requirement. If the blue team advances the ball by more than 10 yards, the inequality is still satisfied.
However, if the blue team advances the ball by less than 10 yards, the inequality is not satisfied, and they will not score any points.
For more such questions on inequality
https://brainly.com/question/27480189
#SPJ8
whats the mean of the numbers 3 7 2 4 7 5 7 1 8 8
Answer:
5.2
Step-by-step explanation:
adding all the numbers together and dividing it by 10.
Answer:
mean = 5.2
Step-by-step explanation:
The mean (or average) of a group of numbers is defined as the value calculated by adding all the given numbers together and then dividing the result by the number of numbers given.
Therefore,
[tex]\boxed{\mathrm{mean = \frac{sum \ of \ the \ numbers}{number \ of \ numbers}}}[/tex].
In the question, the numbers given are: 3, 7, 2, 4, 7, 5, 7, 1, 8, and 8.
Therefore,
sum = 3 + 7 + 2 + 4 + 7 + 5 + 7 + 1 + 8 + 8
= 52
There are 10 numbers given in the question. Therefore, using the formula given above, we can calculate the mean:
[tex]\mathrm{mean = \frac{52}{10}}[/tex]
[tex]= \bf 5.2[/tex]
Hence, the mean of the given numbers is 5.2.
The overhanging beam carries two concentrated loads W and a uniformly distributed load of magnitude 4W. The working stresses are 5000 psi in tension, 9000 psi in compression, and 6000 psi in shear. Determine the largest allowable value of W in Ib. Use three decimal places. The 12-ft long walkway of a scaffold is made by screwing two 12-in by 0.5-in sheets of plywood to 1.5-in by 3.5-in timbers as shown. The screws have a 3-in spacing along the length of the walkway. The working stress in bending is 700 psi for the plywood and the timbers, and the allowable shear force in each screw is 300lb. What limit should be placed on the weight W of a person who walks across the plank? Use three decimal places.
The given working stress values for bending and shear:
For bending: σ = (M * c) / I = 700 psi
For shear: τ = (V * A) / (n * d) = 300 lb
To solve the first problem regarding the overhanging beam, let's analyze the different loading conditions separately.
Concentrated loads (W):
Since there are two concentrated loads of magnitude W, the maximum bending moment occurs at the center of the beam, where the loads are applied. The maximum bending moment for each concentrated load is given by:
M = W * L/4
Uniformly distributed load (4W):
The maximum bending moment due to the uniformly distributed load occurs at the center of the beam. The maximum bending moment for a uniformly distributed load is given by:
M = (w * L^2) / 8
Where w is the load per unit length and is equal to 4W/L.
To determine the largest allowable value of W, we need to consider the maximum bending moment caused by either the concentrated loads or the uniformly distributed load.
The total bending moment is the sum of the bending moments due to the concentrated loads and the uniformly distributed load:
M_total = 2 * (W * L/4) + ((4W/L) * L^2) / 8
M_total = (WL/2) + W * L^2 / 8
To ensure that the working stress limits are not exceeded, we need to equate the maximum bending moment to the moment of resistance of the beam. Assuming the beam is rectangular in shape, the moment of resistance (M_r) is given by:
M_r = (b * h^2) / 6
Where b is the width of the beam (assumed to be constant) and h is the height of the beam.
We can equate the maximum bending moment to the moment of resistance and solve for W:
(WL/2) + (W * L^2 / 8) = (b * h^2) / 6
Now, substitute the given working stress values for tension, compression, and shear:
For tension: (WL/2) + (W * L^2 / 8) = (5000 * b * h^2) / 6
For compression: (WL/2) + (W * L^2 / 8) = (9000 * b * h^2) / 6
For shear: (WL/2) + (W * L^2 / 8) = (6000 * b * h^2) / 6
Solve these equations simultaneously to find the largest allowable value of W.
Moving on to the second problem regarding the scaffold walkway:
To determine the weight limit W for a person walking across the plank, we need to consider the bending stress and the shear stress on the screws.
Bending stress:
The maximum bending stress occurs at the midpoint between screws due to the distributed load of the person's weight. The maximum bending stress is given by:
σ = (M * c) / I
Where σ is the bending stress, M is the bending moment, c is the distance from the neutral axis to the outer fiber (assumed to be half the thickness of the plank), and I is the moment of inertia of the plank.
Shear stress:
The maximum shear stress occurs in the screws due to the shear force caused by the person's weight. The maximum shear stress is given by:
τ = (V * A) / (n * d)
Where τ is the shear stress, V is the shear force, A is the cross-sectional area of the screw, n is the number of screws, and d is the spacing between screws.To ensure that the working stress limits are not exceeded, we need to equate the maximum bending stress and the maximum shear stress to their respective working stress limits and solve for W.
Substitute the given working stress values for bending and shear:
For bending: σ = (M * c) / I = 700 psi
For shear: τ = (V * A) / (n * d) = 300 lb
Solve these equations simultaneously to find the limit on the weight W of a person who walks across the plank.
To learn more about beam
https://brainly.com/question/31681764
#SPJ11
Derive the following design equations starting from the general mole balance equation a) CSTR [7] b) Batch [7] c) PBR
a) Continuous Stirred Tank Reactor (CSTR): V * dC/dt = F₀ * C₀ - F * C + R b) Batch: V * dC/dt = F₀ * C₀ - R c) Plug Flow Reactor (PBR): dC/dz = R
a) Continuous Stirred Tank Reactor (CSTR):
The general mole balance equation for a CSTR is given as:
Rate of accumulation = Rate of generation - Rate of outflow + Rate of inflow
In terms of moles, this equation can be written as:
V * dC/dt = F₀ * C₀ - F * C + R
where:
V is the reactor volume,
C is the concentration of the reactant in the reactor,
t is time,
F₀ is the volumetric flow rate of the feed,
C₀ is the concentration of the reactant in the feed,
F is the volumetric flow rate of the effluent,
and R is the rate of reaction.
b) Batch Reactor:
For a batch reactor, the general mole balance equation is:
Rate of accumulation = Rate of generation - Rate of reaction
In terms of moles, this equation can be written as:
V * dC/dt = F₀ * C₀ - R
where:
V is the reactor volume,
C is the concentration of the reactant in the reactor,
t is time,
F₀ is the initial volumetric flow rate of the feed,
C₀ is the initial concentration of the reactant in the feed,
and R is the rate of reaction.
c) Plug Flow Reactor (PBR):
For a plug flow reactor, the general mole balance equation is:
Rate of accumulation = Rate of generation - Rate of outflow
In terms of moles, this equation can be written as:
dC/dz = R
where:
C is the concentration of the reactant,
z is the spatial coordinate along the reactor length,
and R is the rate of reaction.
To know more about Reactor:
https://brainly.com/question/29123819
#SPJ4
Which of the following are strong bases? a.Ni(OH)_2 b.Cr(OH_)3 c.Ca(OH)_2
Among the options provided, the strong base is calcium hydroxide (Ca(OH)2). Calcium hydroxide is considered a strong base because it dissociates completely in water to form calcium ions (Ca2+) and hydroxide ions (OH-).
The dissociation of calcium hydroxide is as follows: Ca(OH)2 → Ca2+ + 2OH-
The presence of a high concentration of hydroxide ions makes calcium hydroxide a strong base.
On the other hand, nickel hydroxide (Ni(OH)2) and chromium hydroxide (Cr(OH)3) are not considered strong bases. They are classified as weak bases. Weak bases do not completely dissociate in water, meaning that only a small fraction of the compound forms hydroxide ions.
In summary, calcium hydroxide (Ca(OH)2) is the strong base among the options provided, while nickel hydroxide (Ni(OH)2) and chromium hydroxide (Cr(OH)3) are classified as weak bases.
The distinction between strong and weak bases lies in the extent of dissociation and the concentration of hydroxide ions produced in aqueous solution.
Strong bases dissociate completely and produce a high concentration of hydroxide ions, while weak bases only partially dissociate and produce a lower concentration of hydroxide ions.
Learn more about chromium hydroxide from the given link!
https://brainly.com/question/14352809
#SPJ11
In order for many drugs to be active, they must fit into cell receptors, In order for the drug to fit into the cell receptor, which of the following must be true? a. The drug must be a complementary shape to the receptor. b. The drug must be able to form intermolecular forces with the receptor. c. The drug must have functional groups in the correct position. d. The drus must have the correct polarity. e. All of the above.
In order for a drug to fit into a cell receptor, all of the following must be true: a) The drug must be a complementary shape to the receptor, b) The drug must be able to form intermolecular forces with the receptor, c) The drug must have functional groups in the correct position, and d) The drug must have the correct polarity.
First, the drug must have a complementary shape to the receptor. This means that the drug's structure should be able to fit into the specific shape of the receptor site on the cell. Think of it like a lock and key - the drug needs to have the right shape to fit into the receptor.
Second, the drug must be able to form intermolecular forces with the receptor. Intermolecular forces are the attractions between molecules, and in this case, they help the drug bind to the receptor. These forces can include hydrogen bonding, van der Waals forces, and electrostatic interactions.
Third, the drug must have functional groups in the correct position. Functional groups are specific groups of atoms that determine the chemical properties of a molecule. These groups can interact with the receptor and play a role in binding.
Finally, the drug must have the correct polarity. Polarity refers to the distribution of electric charge in a molecule. The drug's polarity should match that of the receptor to ensure proper binding. For example, if the receptor is polar, the drug should also be polar.
In conclusion, for a drug to fit into a cell receptor, it must have a complementary shape, be able to form intermolecular forces, have functional groups in the correct position, and have the correct polarity. These factors determine the drug's ability to bind to the receptor and be active.
Know more about receptor here:
https://brainly.com/question/32700427
#SPJ11
The gascous elementary reaction (A+B+2C) takes place isothermally at a steady state in a PBR. 20 kg of spherical catalysts is used. The feed is equimolar and contains only A and B. At the inlet, the total molar flow rate is 10 mol/min and the total volumetric flow rate is 5 dm'. kA is 1.3 dm" (mol. kg. min) Consider the following two cases: • Case (1): The volumetric flow rate at the outlet is 4 times the volumetric flow rate at the inlet. • Case (2): The volumetric flow rate remains unchanged. a) Calculate the pressure drop parameter (a) in case (1). [15 pts b) Calculate the conversion in case (1). [15 pts/ c) Calculate the conversion in case (2). [10 pts d) Comment on the obtained results in b) and c). [
Let's break down the problem step-by-step.
a) To calculate the pressure drop parameter (a) in case (1), we need to use the following formula:
a = (ΔP * V) / (F * L * ρ)
where:
ΔP = pressure drop
V = volume of catalysts used
F = molar flow rate at the inlet
L = volumetric flow rate at the outlet
ρ = density of the catalysts
Given:
ΔP = unknown
V = 20 kg
F = 10 mol/min
L = 4 * volumetric flow rate at the inlet (which is 5 dm³/min)
ρ = unknown
To solve for ΔP, we need to find the values of ρ and L first.
We know that the total molar flow rate at the inlet (F) is 10 mol/min and the total volumetric flow rate at the inlet is 5 dm³/min. Since the feed is equimolar and contains only A and B, we can assume that each component has a molar flow rate of 5 mol/min (10 mol/min / 2 components).
Now, let's find the density (ρ) using the given information. The density is the mass per unit volume, so we can use the formula:
ρ = V / m
where:
V = volume of catalysts used (20 kg)
m = mass of catalysts used
Since the mass of catalysts used is not given, we cannot calculate the density (ρ) at this time. Therefore, we cannot solve for the pressure drop parameter (a) in case (1) without additional information.
b) Since we don't have the pressure drop parameter (a), we cannot directly calculate the conversion in case (1) using the given information. Additional information is needed to solve for the conversion.
c) In case (2), the volumetric flow rate remains unchanged. Therefore, the volumetric flow rate at the outlet is the same as the volumetric flow rate at the inlet, which is 5 dm³/min.
To calculate the conversion in case (2), we can use the following formula:
Conversion = (F - F_outlet) / F
where:
F = molar flow rate at the inlet (10 mol/min)
F_outlet = molar flow rate at the outlet (which is the same as the molar flow rate at the inlet, 10 mol/min)
Using the formula, we can calculate the conversion in case (2):
Conversion = (10 mol/min - 10 mol/min) / 10 mol/min
Conversion = 0
Therefore, the conversion in case (2) is 0.
d) In case (1), we couldn't calculate the pressure drop parameter (a) and the conversion because additional information is needed. However, in case (2), the conversion is 0. This means that there is no reaction happening and no conversion of reactants to products.
Overall, we need more information to solve for the pressure drop parameter (a) and calculate the conversion in case (1). The results in case (2) indicate that there is no reaction occurring.
To know more about pressure drop parameter :
https://brainly.com/question/33226418
#SPJ11
for
a T-beam, the width of the flange shall not exceed the width of the
beam plus _times the thickness of the slab
Answer: In this example, the width of the flange should not exceed 300 mm.
According to the given information, the width of the flange in a T-beam should not be greater than the sum of the width of the beam and a certain multiple of the thickness of the slab. Let's break down this requirement step-by-step:
1. Identify the width of the beam: To determine the width of the beam, we need to measure the distance between the top and bottom flanges of the T-beam.
2. Determine the thickness of the slab: The thickness of the slab refers to the vertical distance from the top surface of the flange to the bottom surface of the flange.
3. Calculate the maximum allowable width for the flange: Multiply the thickness of the slab by the given multiple, and add this value to the width of the beam. This will give us the maximum allowable width for the flange.
For example, let's say the width of the beam is 200 mm and the thickness of the slab is 50 mm. If the given multiple is 2, we can calculate the maximum allowable width for the flange as follows:
Maximum allowable width for flange = Width of the beam + (Multiple * Thickness of the slab)
Maximum allowable width for flange = 200 mm + (2 * 50 mm)
Maximum allowable width for flange = 200 mm + 100 mm
Maximum allowable width for flange = 300 mm
Therefore, in this example, the width of the flange should not exceed 300 mm.
It's important to note that the given multiple may vary depending on the design requirements and specifications of the T-beam. It's crucial to refer to the relevant codes and standards to ensure compliance with the specific guidelines.
To learn more about Maximum allowable width :
https://brainly.com/question/33394490
#SPJ11
Find the Maclaurin series of the following function and its radius of convergence ƒ(x) = cos(x²).
The Maclaurin series expansion of the function ƒ(x) = cos(x²) can be obtained by substituting x² into the Maclaurin series expansion of cos(x). The radius of convergence of the resulting series is determined by the convergence properties of the original function.
The Maclaurin series expansion of cos(x) is given by cos(x) = 1 - x²/2! + x⁴/4! - x⁶/6! + ..., where the terms are derived from the even powers of x and alternate signs.
To find the Maclaurin series expansion of cos(x²), we substitute x² into the expansion of cos(x), yielding cos(x²) = 1 - (x²)²/2! + (x²)⁴/4! - (x²)⁶/6! + ...
Simplifying further, we have cos(x²) = 1 - x⁴/2! + x⁸/4! - x¹²/6! + ...
The resulting series is the Maclaurin series expansion of cos(x²).
To determine the radius of convergence of the series, we consider the convergence properties of the original function, cos(x²). The function cos(x²) is defined for all real values of x, which implies that the Maclaurin series expansion of cos(x²) converges for all real values of x. Therefore, the radius of convergence of the series is infinite, indicating that it converges for all values of x.
Learn more about function here: brainly.com/question/31062578
#SPJ11
The Maclaurin series expansion of the function ƒ(x) = cos(x²) can be obtained by substituting x² into the Maclaurin series expansion of cos(x). The radius of convergence of the series is infinite, indicating that it converges for all values of x.
The radius of convergence of the resulting series is determined by the convergence properties of the original function.
The Maclaurin series expansion of cos(x) is given by cos(x) = 1 - x²/2! + x⁴/4! - x⁶/6! + ..., where the terms are derived from the even powers of x and alternate signs.
To find the Maclaurin series expansion of cos(x²), we substitute x² into the expansion of cos(x), yielding cos(x²) = 1 - (x²)²/2! + (x²)⁴/4! - (x²)⁶/6! + ...
Simplifying further, we have cos(x²) = 1 - x⁴/2! + x⁸/4! - x¹²/6! + ...
The resulting series is the Maclaurin series expansion of cos(x²).
To determine the radius of convergence of the series, we consider the convergence properties of the original function, cos(x²). The function cos(x²) is defined for all real values of x, which implies that the Maclaurin series expansion of cos(x²) converges for all real values of x. Therefore, the radius of convergence of the series is infinite, indicating that it converges for all values of x.
Learn more about function here: brainly.com/question/31062578
#SPJ11
The inside of a house is kept at a balmy 28 °C against an average external temperature of 2 °C by action of a heat pump. At steady state, the house loses 4 kW of heat to the outside. Inside the house, there is a large freezer that is always turned on to keep its interior compartment at -7 °C, achieved by absorbing 2.5 kW of heat from that compartment. You can assume that both the heat pump and the freezer are operating at their maximum possible thermodynamic efficiencies. To save energy, the owner is considering: a) Increasing the temperature of the freezer to -4 °C; b) Decreasing the temperature of the inside of the house to 26 °C. Which of the two above options would be more energetically efficient (i.e. would save more electrical power)? Justify your answer with calculations.
Judging from the two results, increasing the temperature of the freezer to -4 °C reduces the power consumption by 1.25 kW, while decreasing the temperature inside the house to 26 °C reduces the power consumption by only 0.5 kW. Hence, the owner should consider increasing the temperature of the freezer to -4 °C to save more energy assuming that both the heat pump and the freezer are operating at their maximum possible thermodynamic efficiencies.
Deciding on the right option for saving energyTo determine which option would be more energetically efficient
With Increasing the temperature of the freezer to -4 °C:
Assuming that the freezer operates at maximum efficiency, the heat absorbed from the compartment is given by
Q = W/Qh = 2.5 kW
If the temperature of the freezer is increased to -4 °C, the heat absorbed from the compartment will decrease.
If the efficiency of the freezer remains constant, the heat absorbed will be
[tex]Q' = W/Qh = (Tc' - Tc)/(Th - Tc') * Qh[/tex]
where
Tc is the original temperature of the freezer compartment (-7 °C),
Tc' is the new temperature of the freezer compartment (-4 °C),
Th is the temperature of the outside air (2 °C),
Qh is the heat absorbed by the freezer compartment (2.5 kW), and
W is the work done by the freezer (which we assume to be constant).
Substitute the given values, we get:
[tex]Q' = (Tc' - Tc)/(Th - Tc') * Qh\\Q' = (-4 - (-7))/(2 - (-4)) * 2.5 kW[/tex]
Q' = 1.25 kW
Thus, if the temperature of the freezer is increased to -4 °C, the power consumption of the freezer will decrease by 1.25 kW.
With decreasing the temperature of the inside of the house to 26 °C:
If the heat pump operates at maximum efficiency, the amount of heat it needs to pump from the outside to the inside is given by
Q = W/Qc = 4 kW
If the temperature inside the house is decreased to 26 °C, the amount of heat that needs to be pumped from the outside to the inside will decrease.
[tex]Q' = W/Qc = (Th' - Tc)/(Th - Tc) * Qc[/tex]
Substitute the given values, we get:
[tex]Q' = (Th' - Tc)/(Th - Tc) * Qc\\Q' = (26 - 28)/(2 - 28) * 4 kW[/tex]
Q' = -0.5 kW
Therefore, if the temperature inside the house is decreased to 26 °C, the power consumption of the heat pump will decrease by 0.5 kW.
Judging from the two results, increasing the temperature of the freezer to -4 °C reduces the power consumption by 1.25 kW, while decreasing the temperature inside the house to 26 °C reduce the power consumption by only 0.5 kW.
Therefore, the owner should consider increasing the temperature of the freezer to -4 °C to save more energy.
Learn more on thermodynamic on https://brainly.com/question/13059309
#SPJ4
In the following integrals, change the order of integration, sketch the corresponding regions, and evaluate the integral both ways. 1 S S [²12² (a) (b) (c) (d) xy dy dx π/2 сose 0 [ 1²³² cos Ꮎ dr dᎾ (x + y)² dx dy [R a terms of antiderivatives). f(x, y) dx dy (express your answer in
a) Integral: ∫₁₀ ∫₁ₓ xy dy dx = 365/4. b) Integral: ∫₀π/2 cosθ dr dθ = b. c) Integral: ∫₁₀ ∫₁²⁻y (x + y)² dx dy = 285/3. d) Incomplete without specific values and function f(x, y).
To change the order of integration, sketch the corresponding regions, and evaluate the given integrals:
a) For ∫₁₀ ∫₁ₓ xy dy dx, we first integrate with respect to y from y = 1 to y = x, and then integrate with respect to x from x = 0 to x = 10. The resulting integral is evaluated using the antiderivatives of xy.
b) For ∫₀π/2 cosθ dr dθ, we integrate with respect to r from r = 0 to r = 1, and then integrate with respect to θ from θ = 0 to θ = π/2. The integral can be evaluated using the antiderivatives of cosθ.
c) For ∫₁₀ ∫₁²⁻y (x + y)² dx dy, we integrate with respect to x from x = 1 to x = 2-y, and then integrate with respect to y from y = 0 to y = 10. The integral is evaluated by substituting the antiderivatives of (x + y)².
d) For ∫ᵇₐ ∫ₐy (x, y) dx dy, we integrate with respect to x from x = a to x = b, and then integrate with respect to y from y = a to y = x. The integral is evaluated using the antiderivatives of the function (x, y).
Please note that the specific calculations and evaluation of the integrals require further information, such as the actual values of a, b, or the given function (x, y).
To learn more about Integral click here
brainly.com/question/31433890
#SPJ11
Complete Question
In the following integrals, change the order of integration, sketch the corresponding regions, and evaluate the integral both ways.
a) ∫¹₀ ∫¹ₓ xy dy dx
b) ∫₀π/2 cosθ dr dθ
c) ∫¹₀ ∫₁²⁻y (x + y)² dx dy
d) ∫ᵇₐ ∫ₐy (x, y) dx dy
express your answer in the terms of antiderivatives.
O
A conjecture and the paragraph proof used to prove the conjecture are shown.
Given: RSTU is a parallelogram
21 and 23 are complementary
Prove: 22 and 23 are complementary.
R
Drag an expression or phrase to each box to complete the proof.
It is given that RSTU is a parallelogram, so RU || ST by the definition of parallelogram. Therefore,
21 22 by the alternate interior angles theorem, and m/1 = m/2 by the
C
It is also given that 41 and 43 are complementary, so
m/1+ m/3 = 90° by the
10
By substitution, m/2+
We can conclude that angle 22 and angle 23 are complementary angles because their measures add up to 90°.
Given: RSTU is a parallelogram
21 and 23 are complementary
Prove: 22 and 23 are complementary.
Proof:
It is given that RSTU is a parallelogram, so RU || ST by the definition of parallelogram.
Therefore, angle 21 and angle 22 are alternate interior angles, and by the alternate interior angles theorem, we know that they are congruent, i.e., m(angle 21) = m(angle 22).
It is also given that angle 41 and angle 43 are complementary, so we have m(angle 41) + m(angle 43) = 90° by the definition of complementary angles.
By substitution, we can replace angle 41 with angle 21 and angle 43 with angle 23 since we have proven that angle 21 and angle 22 are congruent.
So, we have:
m(angle 21) + m(angle 23) = 90°
Since we know that m(angle 21) = m(angle 22) from the alternate interior angles theorem, we can rewrite the equation as:
m(angle 22) + m(angle 23) = 90°
Therefore, we can conclude that angle 22 and angle 23 are complementary angles because their measures add up to 90°.
In summary, by using the properties of parallelograms and the definition of complementary angles, we have shown that if angle 21 and angle 23 are complementary, then angle 22 and angle 23 are also complementary.
For similar question on complementary angles.
https://brainly.com/question/16281260
#SPJ8
A circular steel rod having a length of 1.3 m has a diameter of 12.32 mm. If it is subjected to an axial tensile force, compute the stiffness of the rod in kN/mm. Use E=200 GPa.
The stiffness of a rod can be calculated using the formula:
Stiffness (k) = (E * A) / L
where E is the Young's modulus of the material, A is the cross-sectional area of the rod, and L is the length of the rod.
Given:
Length of the rod (L) = 1.3 m = 1300 mm
Diameter of the rod (d) = 12.32 mm
First, we need to calculate the cross-sectional area of the rod using the formula for the area of a circle:
A = π * (d/2)^2
A = π * (12.32/2)^2
A ≈ 119.929 mm^2
Substituting the given values into the stiffness formula:
Stiffness (k) = (200 GPa * 119.929 mm^2) / 1300 mm
Stiffness (k) ≈ 18.419 kN/mm
The stiffness of the steel rod under the given conditions is approximately 18.419 kN/mm. This value represents the ratio of the applied axial tensile force to the resulting deformation in the rod. It indicates the rod's ability to resist deformation and maintain its shape when subjected to the applied force.
To know more about stiffness, visit;
https://brainly.com/question/14800060
#SPJ11
Using the sine rule complete equation
The complete equation using the sine rule is 10/sin(41) = 13/sin(59)
How to complete equation using the sine ruleFrom the question, we have the following parameters that can be used in our computation:
The triangle
The sine rule states that
a/sin(A) = b/sin(B)
using the above as a guide, we have the following:
10/sin(41) = 13/sin(59)
Hence, the complete equation using the sine rule is 10/sin(41) = 13/sin(59)
Read more about law of sines at
https://brainly.com/question/30974883
#SPJ1
Assume A = QR is the QR decomposition of A and assume A is tridiagonal and symmetric. Prove that RQ remains to be tridiagonal and symmetric. Even though it is not necessary, but you can assume A is non-singular in the proof. The above result shows that pure QR algorithm reserves the symmetric and tridiagonal structure.
The matrix product RQ, where A = QR is the QR decomposition of A, remains tridiagonal and symmetric.
The QR decomposition of a tridiagonal and symmetric matrix A yields A = QR, where Q is an orthogonal matrix and R is an upper triangular matrix. To prove that RQ is also tridiagonal and symmetric, we can express RQ as (A^T)(A^-1), where A^T is the transpose of A and A^-1 is the inverse of A.
Since A is symmetric, we have A = A^T, and thus (A^T)(A^-1) = (A)(A^-1) = I, where I is the identity matrix. It follows that RQ = I, which is symmetric and tridiagonal.
Therefore, the product RQ remains tridiagonal and symmetric, preserving the original structure of the matrix A.
Learn more about matrix product
brainly.com/question/29239316
#SPJ11
Please answer ALL questions 1. Explain how joints OR Joints OR lamination influence the strength of the rockmass. Choose one. 2. Explain the occurrence of water fall related to weathering CHEMICAL. of rock in PHYSICAL and CHEMICAL
1. Joints and lamination weaken the strength of the rockmass, making it more prone to deformation and failure.
2. Waterfalls can form through the combined effects of physical and chemical weathering on rocks.
1. Joints or lamination influences the strength of the rockmass by causing it to become more brittle, therefore, affecting the ability of the rock to resist deformation or breakage. The presence of joints in rocks causes them to become less resistant to external stresses because joints are areas of weakness and can easily crack when subjected to force.
The spacing of joints and lamination also has a direct impact on the strength of rockmass. The closer the joints, the weaker the rock, and the further apart the joints, the stronger the rock. This is because as the joints get closer together, the rock loses its ability to support itself, and as such, it becomes more susceptible to deformation and failure.
2. Waterfall occurrence can be related to both physical and chemical weathering processes. Physical weathering occurs when rocks break down into smaller fragments through processes such as freeze-thaw, thermal expansion and contraction, and abrasion. As water flows through the cracks and crevices in the rock, it can cause these processes to occur and, as such, can contribute to the formation of waterfalls.
Chemical weathering occurs when rocks are broken down by chemical reactions with water, oxygen, and other chemicals. This can lead to the formation of new minerals that are less resistant to erosion than the original rock. As water flows over these rocks, it can dissolve the new minerals, creating new cracks and crevices in the rock. This can contribute to the formation of waterfalls as the water continues to erode the rock.
Overall, both physical and chemical weathering processes can contribute to the formation of waterfalls through the erosion of rocks over time.
Learn more about waterfall :
https://brainly.com/question/27112306
#SPJ11