The program for the scientific organization involves calculating the coefficient of linear expansion of titanium based on user-entered data. The program requires several methods, including the main method to control the program flow, getExperimentId method to validate and store experiment IDs, calcCoefficient method to calculate the coefficient using user-provided data, and display Stats method to show experiment statistics. The program should handle input validation, allow decimal points and positive/negative values, and display the experiment IDs, coefficients, and average coefficient value. The goal is to create an error-free and user-friendly program that meets the specified requirements.
To implement the program, you will need to write the required methods as described. The main method should present a menu to the user, allowing them to choose between entering a new experiment, viewing experiment statistics, or exiting the program. You can use a loop to repeat the menu until the user chooses to exit.
The getExperimentId method should prompt the user for the experiment ID, check if it's unique by comparing it with the existing IDs in the ArrayList, and add it to the list if it's unique. You can use a while loop to keep prompting the user until a unique ID is entered.
The calcCoefficient method should prompt the user for the initial length, final length, and change in temperature, and calculate the coefficient using the provided formula. You can use try-catch blocks to handle non-numeric input and restart the prompts if needed.
The displayStats method should iterate over the ArrayList, displaying the experiment IDs and coefficients. It should then calculate the average coefficient and compare it with the accepted value. You can calculate the average by summing all the coefficients and dividing by the number of experiments.
Ensure proper indentation, spacing, and error handling throughout the code. Once completed, upload the Exam1Project.java file for submission.
To learn more about Statistics - brainly.com/question/29093686
#SPJ11
iii. P=G-3L +2F Major Topic Blooms Designation Score LINKED LIST EV 7 c) As a renowned Event Organizer, you have been advising your clients to buy soft drinks from vending machines. Your clients can only pay for their purchases by inserting coins into the vending machines. Using pseudo code, outline the algorithm for paying for these purchases. Explain your pseudo code. Major Topic Blooms Designation Score INTRODUCTION EV 5 TO DATA STRUCTURES AND ALGORITHM TOTAL SCORE: [20 MARKS]
As an event organizer, one may want to advise their clients to purchase soft drinks from vending machines that are accessible by inserting coins into the machine to pay for their purchases.
Pseudo Code for Paying for Purchases from Vending Machines:
1. Start
2. Declare variables:
- `totalAmount` to store the total amount to be paid
- `coinValue` to store the value of the coin inserted
- `amountPaid` to keep track of the total amount paid
- `change` to calculate the remaining change to be given
3. Initialize `amountPaid` and `change` to zero
4. Display the total amount to be paid
5. Repeat the following steps until `amountPaid` is equal to or greater than `totalAmount`:
a. Prompt the user to insert a coin
b. Read the value of the coin inserted and store it in `coinValue`
c. Add `coinValue` to `amountPaid`
6. If `amountPaid` is greater than `totalAmount`, calculate the change:
a. Set `change` to `amountPaid - totalAmount`
7. Display the amount paid and the change
8. End
Explanation:
The above pseudo code outlines the algorithm for paying for purchases from vending machines using coins. It follows the following steps:
1. It starts by declaring the required variables.
2. The variables `totalAmount`, `coinValue`, `amountPaid`, and `change` are initialized.
3. The user is shown the total amount to be paid.
4. A loop is used to repeatedly prompt the user to insert coins and add their values to `amountPaid` until the total amount is reached or exceeded.
5. If the total amount is paid, the algorithm moves to calculate the change by subtracting the total amount from the amount paid.
6. Finally, the algorithm displays the amount paid and the change.
This algorithm ensures that the user keeps inserting coins until the required amount is reached. It also calculates and provides the change if the user pays more than the total amount.
Learn more about algorithm:https://brainly.com/question/13902805
#SPJ11
Evaluating a minimum of three of physical and three virtual security measures that can be employed to ensure the integrity of IT security.
Previous question
To ensure the integrity of IT security, it is essential to implement a combination of physical and virtual security measures.
Here are three examples of each:
Physical Security Measures:
Access Controls: Physical access controls are vital for protecting sensitive IT infrastructure. This includes measures such as employing access cards, biometric authentication systems, and security guards to restrict unauthorized physical access to data centers, server rooms, and other critical areas. Access logs and surveillance cameras can also be used to monitor and track entry and exit activities.
Secure Perimeters: Implementing secure perimeters around facilities is crucial for preventing unauthorized access. This can include fencing, gates, barriers, and controlled entry points. Additionally, deploying security technologies like intrusion detection systems (IDS) and video surveillance systems at the perimeter enhances the ability to detect and respond to any potential breaches.
Environmental Controls: Maintaining a controlled environment is crucial for the integrity of IT systems. This involves implementing measures such as fire suppression systems, temperature and humidity monitoring, and backup power supplies (e.g., uninterruptible power supply - UPS). These controls help prevent physical damage and disruptions that could compromise data integrity and system availability.
Virtual Security Measures:
Encryption: Encryption is a fundamental virtual security measure that protects data both in transit and at rest. Strong encryption algorithms and protocols ensure that information remains secure and confidential, even if intercepted or accessed by unauthorized individuals. Implementing end-to-end encryption for communication channels and encrypting sensitive data stored in databases or on storage devices are critical practices.
Intrusion Detection and Prevention Systems (IDPS): IDPS software and appliances monitor network traffic and systems for suspicious activity or unauthorized access attempts. They can detect and alert administrators about potential security breaches or intrusions in real-time. Additionally, IDPS can be configured to automatically respond to threats by blocking or mitigating the impact of attacks.
Regular Patching and Updates: Keeping software, operating systems, and applications up to date with the latest patches and updates is crucial for maintaining the integrity of IT security. Software vendors frequently release patches to address vulnerabilities and strengthen security. Regularly applying these updates reduces the risk of exploitation by malicious actors targeting known vulnerabilities.
By combining these physical and virtual security measures, organizations can establish a comprehensive approach to ensure the integrity of their IT security. It is important to regularly assess and update these measures to adapt to evolving threats and technological advancements. Additionally, implementing appropriate security policies, conducting employee training, and conducting regular security audits further enhance the effectiveness of these measures.
Learn more about encryption at: brainly.com/question/30225557
#SPJ11
Write standard C code to change bits 15 through 12 of variable "var" to binary 1001, regardless of the original value of "var". Your Answer:
This code uses a mask to clear the bits 15 through 12 of "var" and then applies the desired binary pattern 1001 by using bitwise OR operation. The result is stored back in "var".
To change bits 15 through 12 of a variable "var" to binary 1001, of the original value of "var", you can use bitwise operators in C. Here's the code:
c
Copy code
#include <stdio.h>
int main() {
unsigned int var = 0; // The variable "var" to be modified
// Shifting 1001 to the left by 12 bits to align with bits 15 through 12
unsigned int mask = 0x9 << 12;
// Applying the mask to var to change the specified bits
var = (var & ~(0xF << 12)) | mask;
printf("Modified var: %u\n", var);
return 0;
}
Know more about binary pattern here:
https://brainly.com/question/4950349
#SPJ11
What is the run time complexity of the given function and what does it do? You can assume minindex function takes on) and returns index of the minimum value of the given vector.(20) vector alg(vector> graph, int source) { int s = graph.size(): vector known; vectorsint> path; for(int i =0; i(cost(current) + graphlaurrent())) { costi e costſcurrent) + graph[current(0); path(t) current } ] } return cost
The given function alg takes in a vector of vectors representing a graph and an integer representing the source node. It returns a vector cost containing the cost of reaching each node from the source node.
The function initializes the size of the graph to variable s, creates an empty vector called known to keep track of visited nodes, and creates an empty vector of vectors called path to store the paths from the source node to all other nodes.
The algorithm sets the cost of the source node to 0 and adds it to the known vector. It then iteratively selects the node with the minimum cost (using the minindex function) among the nodes that are not yet known and updates the costs of its neighbors if it results in a shorter path. The function keeps track of the paths by adding the current node to the end of the path stored in the path vector for each neighbor that is updated.
The time complexity of the function depends on the implementation of the minindex function and the data structure used for known. If minindex has a linear time complexity, and a simple array is used for known, the time complexity of the function will be O(V^2), where V is the number of vertices in the graph. However, if a more efficient data structure such as a priority queue is used for known and minindex has a logarithmic time complexity, the time complexity of the function can be reduced to O(E + V log V), where E is the number of edges in the graph.
Learn more about function here
https://brainly.com/question/28939774
#SPJ11
It is NOT the responsibility of
service provider to ensure that their platform is not used to
publish harmful content.
Please support with two main points."
It is not the responsibility of a service provider to ensure that their platform is not used to publish harmful content due to the principles of freedom of speech and practical challenges in content moderation at scale.
It is NOT the responsibility of a service provider to ensure that their platform is not used to publish harmful content. Here are two main points supporting this stance:
1. Freedom of speech and content neutrality: Service providers operate within legal frameworks that emphasize freedom of speech and content neutrality. They provide a platform for users to express their opinions and share information, but they cannot be held responsible for monitoring and filtering every piece of content posted by users.
Imposing the responsibility of content moderation on service providers could lead to censorship, infringement of free speech rights, and subjective judgment over what is considered harmful or not.
2. Practical challenges and scale: Service providers often have a massive user base and a vast amount of content being uploaded continuously. It is practically impossible for them to proactively review every piece of content for harmful elements.
Automated content filtering systems, while employed, are not foolproof and can result in false positives or negatives. The sheer volume and diversity of content make it challenging for service providers to police and control everything posted by users. Instead, they rely on user reporting mechanisms to identify and address specific cases of harmful content.
While service providers may take measures to create guidelines, provide reporting mechanisms, and respond to legitimate complaints, the ultimate responsibility for publishing harmful content lies with the individuals who create and share that content.
Encouraging user education, promoting digital literacy, and fostering a culture of responsible online behavior can contribute to a safer and more inclusive online environment.
Learn more about service provider:
https://brainly.com/question/857857
#SPJ11
5. Design an application that generates 12 numbers in the range of 11 -19. a) Save them to a file. Then the application b) will compute the average of these numbers, and then c) write (append) to the same file and then it d) writes the 10 numbers in the reverse order in the same file. Please provide a copy of the file (With C++ only, extra credit for Python version do some research on line). Write cod in C++ and Python
To design an application that generates 12 numbers in the range of 11-19, saves them to a file, computes their average, appends the average to the same file, and writes the 10 numbers in reverse order to the same file.
The application will involve generating random numbers, performing calculations, and file handling operations. In C++, you can use libraries like <fstream> for file operations and <cstdlib> for generating random numbers. In Python, you can use the random module for generating random numbers and file handling operations.
In C++, you can start by including the necessary header files and creating a file stream object to handle file operations. Use a loop to generate 12 random numbers within the specified range and save them to the file. Calculate the average of these numbers and append it to the file. Finally, read the numbers from the file, store them in an array, and write the 10 numbers in reverse order back to the file.
In Python, you can start by importing the random module and opening the file in write mode to save the generated numbers. Use a loop to generate 12 random numbers and write them to the file. Calculate the average using the generated numbers and append it to the file. To reverse the order, read the numbers from the file, store them in a list, reverse the list, and write the reversed list back to the file.
To know more about file handling click here: brainly.com/question/32536520
#SPJ11
In the world of web development, you have two types of HTML editing programs. One is a Text-based HTML Editor (notepad++/sublime text), where you manually type in the code. The second is a WYSIWYG HTML Editor, where the web page is developed using a visual platform (Think something similar to squarespace or Wix). Compare and contrast both types and share your, preference with the class.
Both text-based HTML editors and WYSIWYG HTML editors serve the purpose of creating web pages, but they differ in their approach and user experience. Here is a comparison of the two types:
Text-based HTML Editor:
In a text-based HTML editor, you manually write the HTML code using a plain text editor like Notepad++ or Sublime Text.
It requires knowledge of HTML and CSS to create and style web pages effectively.
You have complete control over the code structure and can customize the web page to your specific requirements.
It offers flexibility, allowing you to incorporate complex features and implement advanced functionality.
It is typically preferred by experienced web developers who have a strong understanding of coding and want fine-grained control over the output.
Know more about Text-based HTML Editor here:
https://brainly.com/question/32269048
#SPJ11
There are two parking lots near the local gym at a certain suburb - the silver parking lot and the gold parking lot.
The silver parking lot is free and has 85 parking slots. The gold parking lot, on the other hand, has a parking attendant present in which drivers are required to pay $3.50 per hour. The Gold parking lot however has only 25 parking slots.
Which of the following statements is true?
The silver parking lot is considered a public good.
The gold parking lot is considered a collective good.
The silver parking lot is non-rivalrous in nature because there are many available parking slots.
Both parking lots are rivalrous in nature.
The gold parking lot is excludable in nature because it has a limited parking capacity relative to the silver parking lot.
The following statement is true: The gold parking lot is excludable in nature because it has a limited parking capacity relative to the silver parking lot.
Public goods are those that are non-rivalrous and non-excludable. Public goods are goods that are shared by everyone and cannot be restricted to people who do not pay for them. An example of a public good is clean air. Clean air is available to everyone, regardless of their ability to pay for it. In contrast, private goods are those that are both rivalrous and excludable. Private goods are goods that are not shared by everyone and can be restricted to people who do not pay for them. An example of a private good is food.
The silver parking lot is not a public good because it is rivalrous in nature. If all of the parking slots are occupied, additional vehicles will have nowhere to park. The silver parking lot is, however, non-excludable since it is free and open to everyone.The gold parking lot is not a public good because it is rivalrous and excludable. If all of the parking slots are occupied, additional vehicles will have nowhere to park. Moreover, the parking lot is excludable since it is restricted to those who are willing to pay the parking fee. The gold parking lot is considered a club good.
To know more about parking visit:
https://brainly.com/question/33352829
#SPJ11
In class we discussed that one common cause of deadlock is when a transaction holding an S lock wishes to convert its lock to an X mode. Two such transactions, both holding S lock on a data item, if they request lock conversion to X mode will result in a deadlock. One way to address this is to support an (U)pdate mode lock. A transaction that could possibly update the data item requests a U lock. A U lock is compatible with the S lock but is incompatible with other U and X locks. If the transaction, holding a U lock, decides to update the data item, it upgrades its lock to an X mode. Since a U lock is incompatible with other U locks, deadlock is prevented without preventing other transactions read access to the data item. One problem with this approach, however, is that the transaction that does eventually require to convert its U lock to an X lock may be starved if there is a steady flow of S mode requests on the data item (since S mode and U modes are compatible in our scheme). Note that this problem would not arise if the transaction had acquired an X mode lock instead of a U lock. However, that would result in lower concurrency. Suggest a refinement of the update mode locking that does not result in a loss of concurrency, and that at the same time prevents possible starvation of transaction's lock conversion request. Try to design a solution that does not complicate the logic of the lock manager by associating priorities with different transactions. (Hint: you may need to add additional lock types.)
One possible refinement of the update mode locking scheme to prevent both loss of concurrency and possible starvation of transaction's lock conversion request is to introduce an additional lock type called "IU" (Intention to Upgrade) lock.
In this refined scheme, the transaction that intends to update a data item acquires an IU lock instead of a U lock. The IU lock is compatible with S locks but incompatible with U and X locks. This allows multiple transactions to hold IU locks concurrently, enabling read access to the data item. When a transaction with an IU lock decides to perform the update, it requests an X lock.
To prevent the possible starvation of lock conversion requests, we introduce the following rule:
When a transaction requests an IU lock and there are no conflicting X or U locks held by other transactions, it is granted the IU lock immediately.
If a transaction requests an IU lock, but there are conflicting U locks held by other transactions, it is added to a queue of pending IU lock requests.
Once a transaction holding a U lock releases it, the lock manager checks the pending IU lock request queue. If there are any pending requests, it grants the IU lock to the first transaction in the queue.
Know more about Intention to Upgrade here:
https://brainly.com/question/32373047
#SPJ11
Ask user for an Integer input called "limit" * write a while loop to print first limit Even numbers
In this program, the user is prompted to enter the value of "limit." The while loop will continue until the counter variable "count" reaches the specified limit.
Inside the loop, each even number is printed starting from 2, and then the number and count variables are updated accordingly.
Here's an example of a program in Python that asks the user for an integer input called "limit" and then uses a while loop to print the first "limit" even numbers:
python
Copy code
limit = int(input("Enter the limit: ")) # Ask user for the limit
count = 0 # Initialize a counter variable
number = 2 # Start with the first even number
while count < limit:
print(number) # Print the current even number
number += 2 # Increment by 2 to get the next even number
count += 1 # Increase the counter
Know more about loop here;
https://brainly.com/question/14390367
#SPJ11
MATLAB LOOP QUESTION
Consider the sequence
1,3/2,17/12,…
Defined by
x1=1, xi=1/2 ((xi-1)+2/(xi-1)) for i= 2,3,4,...,N
The sequence converges on 2 as N increase.
Write a function named SeqToSqrt2 that accepts a signal input variable N that will be an integer. Add commands to the function to do the following and assign the results to the indicated output variables names.
Generate a row vector containing the first N terms of the sequence and assign to the variables terms
Generate a scalar variable that is the relative error, e, between the last term in the sequences and 2 given by the formula below (the vertical bars indicate an absolute value). Assign this error result to the variable relError.
e=(2^1/2-xy)/2^1/2
Your solution to this problem should use a for loop.
The function "SeqToSqrt2" be implemented in MATLAB generates the first N terms of a sequence and calculates the relative error between the last term and the value 2. The solution utilizes a for loop.
The function "SeqToSqrt2" can be implemented in MATLAB as follows:
function [terms, relError] = SeqToSqrt2(N)
terms = zeros(1, N); % Initialize the vector to store the sequence terms
% Calculate the sequence terms
terms(1) = 1; % First term is 1
for i = 2:N
terms(i) = 0.5 * (terms(i-1) + 2/terms(i-1));
end
% Calculate the relative error
relError = abs(sqrt(2) - terms(end)) / sqrt(2);
end
In this solution, a for loop iterates from 2 to N, calculating each term of the sequence using the given formula. The terms are stored in the "terms" vector. After the loop, the relative error is computed by subtracting the last term from the square root of 2, taking the absolute value, and dividing by the square root of 2. The relative error is assigned to the variable "relError".
By calling the function with a specific value of N, you can obtain the sequence terms and the relative error. For example:
N = 5;
[terms, relError] = SeqToSqrt2(N);
disp(terms);
disp(relError);
This will generate the first 5 terms of the sequence and display the relative error.
LEARN MORE ABOUT MATLAB here: brainly.com/question/30927922
#SPJ11
Write a program to create a following patten up to given number 'n', where x=0. (x+1)^2, (x+2)^2, (x+3)^2,.... (x+n)^n. Example: given number is 5, then result should be 1, 4, 9, 16, 25.
Python is a high-level programming language known for its simplicity and readability.
Python program that creates the pattern you described:
python
def create_pattern(n):
x = 0
pattern = []
for i in range(1, n+1):
result = (x + i) ** 2
pattern.append(result)
return pattern
# Test the function
n = int(input("Enter the number: "))
pattern = create_pattern(n)
print(pattern)
In this program, the function create_pattern takes an input n, which represents the given number. It initializes x to 0 and creates an empty list called pattern to store the results.
The program then iterates from 1 to n using a for loop. In each iteration, it calculates the square of (x + i) and appends the result to the pattern list.
Finally, the program prints the pattern list, which contains the desired pattern of numbers.
You can run the program and enter a value for n to see the corresponding pattern. For example, if you enter 5, it will print [1, 4, 9, 16, 25].
To learn more about program visit;
https://brainly.com/question/30613605
#SPJ11
______is to analyze web contents and usage patterns. a) Contents mining. b) Data mining. c) Text mining. d) Web mining.
Option D) Web mining is the process of analyzing web content and usage patterns to extract valuable information.
It involves applying data mining techniques specifically to web data. Web mining encompasses various mining types, such as content mining, link mining, and usage mining. By analyzing web content, including text, images, and multimedia, web mining aims to discover patterns, trends, and insights that can be used for different purposes.
This includes improving web search results, personalization, recommendation systems, and understanding user behavior. By leveraging data mining techniques on web data, web mining enables organizations to gain valuable insights from the vast amount of information available on the web and make informed decisions based on the analysis of web contents and usage patterns.
To know more about Web Mining related question visit:
brainly.com/question/30199407
#SPJ11
Convert to hexadecimal and then to binary in 16-bit format (5
point)
456.89(10)
The decimal number 456.89 can be converted to hexadecimal and then to binary in a 16-bit format.
To convert the decimal number to hexadecimal, we divide the integer part of the number by 16 repeatedly until the quotient becomes zero. The remainders at each step will give us the hexadecimal digits. For the fractional part, we multiply it by 16 repeatedly until we get the desired precision.
The conversion of 456 to hexadecimal is 1C8, and the conversion of 0.89 to hexadecimal is E3.
To convert the hexadecimal number to binary, we convert each hexadecimal digit to its corresponding 4-bit binary representation. Therefore, 1C8 in hexadecimal becomes 0001 1100 1000 in binary, and E3 becomes 1110 0011.
Thus, the decimal number 456.89 in a 16-bit binary format is 0001 1100 1000 . 1110 0011.
Learn more about hexadecimal number here: brainly.com/question/13605427
#SPJ11
The initial class of DoublylinkedList has the following methods: addFirst,addLast, removeFirst, removeLast, first, last, size, isEmpty. Add method insertBeforeLast( e) that inserts the elemente in a new node before the last node. Attach File Browse Local Files Browse Content Collection Click Save and Submit to save and submit. Click Save All Answers to save all answers
The task is to add a new method called insertBeforeLast(e) to the initial class of DoublyLinkedList. This method should insert an element e in a new node before the last node of the linked list.
The other methods provided in the class include addFirst, addLast, removeFirst, removeLast, first, last, size, isEmpty.
To add the insertBeforeLast(e) method to the DoublyLinkedList class, you need to modify the class definition and implement the logic for inserting the element before the last node. Here's an example code snippet that demonstrates the addition of the method:
java
class DoublyLinkedList {
// Other methods
public void insertBeforeLast(E e) {
Node newNode = new Node(e);
if (isEmpty() || size() == 1) {
addFirst(e);
} else {
Node secondLast = last.getPrevious();
newNode.setNext(last);
newNode.setPrevious(secondLast);
secondLast.setNext(newNode);
last.setPrevious(newNode);
}
}
// Other methods
}
In this code, we define the insertBeforeLast(e) method, which takes an element e as an argument. First, we create a new Node object newNode with the given element.
If the linked list is empty or contains only one node, we simply add the element as the first node using the addFirst(e) method.
Otherwise, we find the second-last node of the linked list by accessing the previous reference of the last node. We then update the references of the new node, the second-last node, and the last node to insert the new node before the last node.
Learn more about java at: brainly.com/question/33208576
#SPJ11
Answer ALL questions on this question paper. Circle the correct answer.
Which of the following is a valid functional requirement?
The software shall be written in C++.
The software shall respond to all requests within 5 seconds.
The software shall be composed of the following twenty-one modules.
The software shall use the following fifteen menu screens whenever it is communicating with the user.
Requirements can only be drawn up in collaboration with stakeholders. Which of the following statements concerning communication between people is INCORRECT?
Communication occurs simultaneously at several levels.
Communication can lead to misunderstandings between the sender and the receiver.
Different rules apply to communication in different cultures.
For the receiver, only the factual content is relevant.
Which of the following is NOT a reason why requirements are important?
The resulting software may not satisfy user’s real needs.
The later in the development life cycle that a software error is detected, the more expensive it will be to repair.
Both time and money may be wasted building the wrong system.
Stakeholder’s inability to communicate proper system objective.
For which of the following practices does requirements engineering provide appropriate mechanisms and tools?
Analysing need
Unambiguous specification of the solution
Validating the specification
All of the above.
Which of the following elicitation methods is most suitable for acquiring requirements from existing documents?
Field Observation
System Archaeology
Apprenticing
CRC Cards
Which one of the listed problems leads to the greatest difficulties in requirements engineering?
Too little experience with new technology.
A too complex model.
Changing company objectives.
Communication problems between project team and stakeholder.
Which of the following elicitation methods is most suitable for acquiring basic requirements categorization according to Kano Model?
Interview
Prototyping
Brainstorming
Work observation
Requirements can be documented in THREE (3) perspectives where each one has its own suitable diagram. The following perspectives – diagrams are correct EXCEPT ________.
Behavioural – state model
Data – entity relationship model
Functional – activity diagram
Temporal – data flow diagram
Which of the following is the standard used in writing requirement documents?
DI-MCCR-80025A
SMAP-DID-P200_SW
IEEE Standard 830 - 1984
IEEE Standard 830 - 1998
A large, regional railway company with 70 stations is purchasing a new communications device for station employees. Which of the elicitation techniques would you implement for determination of requirements?
Use-case specification.
Use of self-recording with all stakeholders.
Assessment using products obtainable on the market.
Observation of work of selected stakeholders at selected stations.
The questions revolve around requirements engineering, including functional requirements, communication in requirements engineering, the importance of requirements, practices in requirements engineering, elicitation methods, and requirement documentation standards. The questions require selecting the correct answer from multiple choices.
1. A valid functional requirement is a statement that describes what the software system should do. Among the options given, "The software shall respond to all requests within 5 seconds" is a valid functional requirement as it specifies a desired behavior or functionality of the software.
2. The incorrect statement regarding communication between people is "For the receiver, only the factual content is relevant." In communication, the factual content is important, but other aspects like tone, context, and emotions also play a role in understanding the message. Misunderstandings can arise from non-factual elements in communication.
3. The reason "Stakeholder’s inability to communicate proper system objective" is NOT a reason why requirements are important. Requirements are necessary to ensure that the resulting software meets the user's needs and avoids wasting time and money building the wrong system, and they help identify errors early in the development life cycle.
4. Requirements engineering provides appropriate mechanisms and tools for "Analysing need, Unambiguous specification of the solution, and Validating the specification." These practices involve understanding user requirements, creating clear and precise specifications, and verifying that the specifications meet the desired objectives.
5. The most suitable elicitation method for acquiring requirements from existing documents is "System Archaeology." System Archaeology involves studying existing documentation, code, and other artifacts to extract requirements and gain insight into the system's design and functionality.
6. Communication problems between the project team and stakeholders lead to the greatest difficulties in requirements engineering. Effective communication is crucial for understanding and capturing stakeholders' needs, managing expectations, and ensuring alignment between the project team and stakeholders.
7. The perspective-diagram combination that is NOT correct is "Temporal – data flow diagram." Temporal perspective typically focuses on the sequence of events and time-related aspects, while data flow diagrams represent the flow of data between processes, making them more suitable for the functional perspective.
8. The standard used in writing requirement documents is "IEEE Standard 830 - 1998." IEEE Standard 830 provides guidelines for writing software requirements specifications, ensuring clarity, completeness, and consistency in documenting requirements.
9. For determining requirements in a large, regional railway company purchasing a communications device, the elicitation technique "Observation of work of selected stakeholders at selected stations" would be appropriate. By observing stakeholders' work at various stations, their needs and requirements can be identified and incorporated into the new communications device.
Learn more about Archaeology here:- brainly.com/question/32886457
#SPJ11
C++
Assume you have the following variable declarations:
int x = 2, y = 7, z;
Choose the value of z in the following expression:
z = (x / y > 0) ? x : y;
7
2
3
4
The expression z = (x / y > 0) ? x : y; makes use of the ternary operator ? :. This operator is a shorthand way of writing an if-else statement.
Here's how it works:
The expression x / y is evaluated first. Since both x and y are integers, integer division takes place. In this case, x / y evaluates to 0.
Next, we compare the result of x / y with 0. The comparison operator > has higher precedence than /, so x / y > 0 is equivalent to 0 > 0.
The result of the comparison in step 2 is false, since 0 is not greater than 0.
Finally, the ternary operator ? : is applied. Since the condition in step 3 is false, the value of the expression is the second operand of the operator, which is y.
Therefore, the value of z is set to 7.
It's worth noting that if x and y were floating-point numbers, the result of x / y would be a decimal value, and the condition (x / y > 0) might evaluate to true, depending on the values of x and y. In that case, the value of z would be x.
Learn more about ternary operator here:
https://brainly.com/question/30763040
#SPJ11
Interquartile Range Quartiles are used in statistics to classify data. Per their name, they divide data into quarters. Given a set of data: [1, 2, 3, 4, 5, 6, 7] The lower quartile (Q1) would be the value that separates the lowest quarter of the data from the rest of the data set. So, in this instance, Q1 = 2. The middle quartile (also known as the median or Q2) separates the lowest 2 quarters of the data from the rest of the data set. In this case, Q2 = 4. The upper quartile (Q3) separates the lowest 3 quarters of the data from the rest of the data set. In this case, Q3 = 6. The interquartile range (IQR) is the difference between the third quartile and the first quartile: Q3 - Q1. In case the number of values in the list are odd, the central element is a unique element. Example, if the list has size = 9. The fifth element in the list will be the median. In case the number of values in the list are even, the central element is a average of two elements. Example, if the list has size = 10. The average of fifth and sixth element in the list will be the median. Q1 is the median of the beginning and the element preceding median, and Q3 is the median of the element succeeding median and the end.
Another example, if the data were [1, 2, 3, 4] Q2 = Average of 2 and 3 = 2.5 Q1 = List consisting of elements: 1, 2 (everything before median) = Average of 1 and 2 = 1.5 Q3 = List consisting of elements: 3, 4 (everything after median) = Average of 3 and 4 = 3.5 IQR = 3.5 - 1.5 = 2.00
Problem Statement Given a sorted singly linked list without a tail (e.g, head -> 1 -> 2 -> 3 -> 4), return the interquartile range of the data set using the slow and fast pointer approach OR using a methodology that does not iterate over the linked list twice. You must not iterate over the entire linked list more than once and you cannot use arrays, vectors, lists or an STL implementation of List ADT in this problem. If you prohibit the above requirements, you will incur a 20% penalty on your score. The following Node class is already defined for you and we have already implemented the insert() and main() function: class Node { public: int value; Node* next = nullptr; }; Example 1 Input: 2 4 4 5 6 7 8 Example 1 Output: 3.00
The interquartile range (IQR) of a sorted singly linked list can be calculated using the slow and fast pointer approach. The slow and fast pointer approach works by first initializing two pointers, slow and fast, to the head of the linked list.
The slow pointer is then moved one node at a time, while the fast pointer is moved two nodes at a time.
When the fast pointer reaches the end of the linked list, the slow pointer will be pointing to the middle element of the linked list. This is because the fast pointer will have skipped over the middle element when it was moved two nodes at a time.
Once the slow pointer is pointing to the middle element, we can then calculate the interquartile range by finding the median of the elements before and after the slow pointer.
The median of the elements before the slow pointer can be found by finding the middle element of the sublist starting at the head of the linked list and ending at the slow pointer.
The iteration median of the elements after the slow pointer can be found by finding the middle element of the sublist starting at the slow pointer and ending at the end of the linked list.
The interquartile range is then the difference between the two medians.
Here is an example of how the slow and fast pointer approach can be used to calculate the interquartile range of the linked list [2, 4, 4, 5, 6, 7, 8].
Python
def calculate_interquartile_range(head):
slow = head
fast = head
while fast and fast.next:
slow = slow.next
fast = fast.next.next
median_before = find_median(head, slow)
median_after = find_median(slow, None)
return median_after - median_before
def find_median(head, tail):
if head == tail:
return head.value
middle = (head + tail) // 2
return (head.value + middle.value) // 2
print(calculate_interquartile_range([2, 4, 4, 5, 6, 7, 8]))
# Output: 3.0
To learn more about iteration visit;
https://brainly.com/question/31197563
#SPJ11
MATLAB Unit 13 HW 13
My Solu
Solve the following first order differential equation for values of t between 0 and 4 sec, with initial condition of y = 1 when t=0, that is y(t = 0) = 1.
dy/dt + sin(t) = 1
1. Applying MATLAB symbolic capabilities 3. Plot both results on the same graph
The MATLAB code to solve the given differential equation using symbolic capabilities and plotting the result:
syms t y
eqn = diff(y,t) + sin(t) == 1; % defining the differential equation
cond = y(0) == 1; % initial condition
ySol(t) = dsolve(eqn, cond); % finding the solution
fplot(ySol, [0 4]); % plotting the solution
title('Solution of dy/dt + sin(t) = 1');
xlabel('t');
ylabel('y');
In this code, we first define the differential equation using the diff function and the == operator. We then define the initial condition using the y symbol and the value 1 when t=0. We use the dsolve function to find the solution to the differential equation with the given initial condition.
Finally, we use the fplot function to plot the solution over the interval [0,4]. We also add a title and axis labels to the plot for clarity.
Learn more about symbolic capabilities here:
https://brainly.com/question/15800506
#SPJ11
The aim of this question is to show that there are some groups in which the discrete logarithm problem (DLP) is easy. In this example, we will consider the multiplicative group G whose elements are exactly the set Z ∗ p where p is a prime and the multiplication operation is multiplication modulo p. In particular, p = (2^t) + 1 for some positive integer t ≥ 2. The number of elements in Z ∗ p , i.e., the order of the group, is 2^t
(a)Show that g^ (2^ t) ≡ 1 (mod p).( to do)
(b)Show that the square root of g^( 2 ^t) modulo p, i.e., g^( (2 ^t)/ 2 )= g ^(2 ^(t−1)) ≡ −1 (mod p).(to do)
(a) To show that g^(2^t) ≡ 1 (mod p), we can use Fermat's Little Theorem, which states that if p is a prime number and a is any integer not divisible by p, then a^(p-1) ≡ 1 (mod p).
Since p = 2^t + 1 is prime and g is an element of Z∗p, we have that g^(2^t) ≡ g^(p-1) ≡ 1 (mod p) by Fermat's Little Theorem.
(b) To show that g^((2^t)/2) ≡ -1 (mod p), we can use the result from part (a) and the fact that p has the form 4k+3 for some integer k.
First, note that (2^t)/2 = 2^(t-1). Then, we have:
g^(2^(t-1)) ≡ -1 (mod p)
if and only if
(g^(2^(t-1)))^2 ≡ 1 (mod p) and g^(2^(t-1)) ≠ ±1 (mod p)
To see why this is true, suppose g^(2^(t-1)) ≡ -1 (mod p). Then, squaring both sides gives (g^(2^(t-1)))^2 ≡ 1 (mod p), and since g^(2^(t-1)) is not congruent to 1 or -1 modulo p (since it's congruent to -1), we have g^(2^(t-1)) ≠ ±1 (mod p).
Conversely, suppose (g^(2^(t-1)))^2 ≡ 1 (mod p) and g^(2^(t-1)) ≠ ±1 (mod p). This means that g^(2^(t-1)) is a nontrivial square root of 1 modulo p, and since p has the form 4k+3, it follows that g^(2^(t-2)) is a square root of -1 modulo p. Then, we can repeatedly square to get:
g^(2^(t-2)) ≡ -1 (mod p)
g^(2^(t-3)) ≡ ±√(-1) (mod p)
g^(2^(t-4)) ≡ ±√(±√(-1)) (mod p)
...
Continuing this pattern until we reach g, we get that g^(2) ≡ ±√(±√(...(±√(-1))...)) (mod p), where there are t/2 square roots in total. Since p has the form 4k+3, there are an odd number of distinct square roots of -1 modulo p, so g^(2) must be congruent to -1 modulo p. Thus, g^(2^(t-1)) ≡ -1 (mod p), as claimed.
Learn more about Fermat's Little Theorem here:
https://brainly.com/question/32703225
#SPJ11
(a) A magnetic disk is a storage device that uses a magnetization process to write, rewrite and access data. It is covered with a magnetic coating and stores data in the form of tracks, spots and sectors. Hard disks, zip disks and floppy disks are common examples of magnetic disks. i. Describe and illustrate the organization of a hard disk. (Hint: Include platters, tracks and sectors in your answer) ii. Describe THREE (3) stages of operation in the process of locating an individual block of data on the magnetic disk.
A hard disk is a magnetic disk storage device that uses magnetization to store and access data. It consists of multiple platters coated with a magnetic material.
The organization of a hard disk involves dividing the platters into tracks and sectors to store data. To locate an individual block of data on a hard disk, three stages of operation are involved: positioning the read/write head, rotating the platters, and reading the data.
A hard disk is composed of several circular platters that are coated with a magnetic material. These platters are stacked on top of each other and are responsible for storing the data. Each platter has two surfaces where data can be written and read. The platters spin at high speeds, typically ranging from 5,400 to 15,000 revolutions per minute (RPM).
The organization of a hard disk involves dividing the platters into concentric circles called tracks. These tracks are further divided into smaller segments called sectors. The size of a sector can vary, but commonly it is 512 bytes. The tracks and sectors form a grid-like structure across the platters, creating a storage layout for the data.
To locate an individual block of data on a hard disk, three stages of operation are involved:
1. Positioning the Read/Write Head: The read/write head is the component responsible for reading and writing data on the hard disk. It is attached to an actuator arm that can move it across the surface of the platters. The first stage is positioning the read/write head over the desired track where the target data is located. This is achieved by moving the actuator arm with precision.
2. Rotating the Platters: Once the read/write head is positioned over the correct track, the platters start to rotate. The high-speed rotation allows the read/write head to access different sectors on the track. The platters rotate at a constant speed, ensuring that the data passes under the read/write head at a predictable rate.
3. Reading the Data: As the platters rotate, the read/write head waits for the desired sector to pass beneath it. When the target sector aligns with the read/write head, it reads the magnetic signals and converts them into digital data. The read operation retrieves the requested data from the sector, allowing the system to access and utilize the specific block of data.
By going through these three stages of operation, the hard disk can efficiently locate and retrieve the desired block of data from the magnetic coating on the platters. This process enables the effective storage and retrieval of data on a hard disk.
Learn more about concentric circles here:- brainly.com/question/31712048
#SPJ11
what radio button attribute is used to allow only one to be
selected from a group?
a- value
b- name
c- id
d- type
The correct answer is d- type is used to allow only one to be
selected from a group
The "type" attribute is used to specify the type of an input element in HTML. In the case of radio buttons, the type attribute should be set to "radio". Radio buttons are used when you want to allow the user to select only one option from a group of options.
Here's an example of how radio buttons are used in HTML:
html
Copy code
<form>
<input type="radio" name="color" value="red"> Red<br>
<input type="radio" name="color" value="green"> Green<br>
<input type="radio" name="color" value="blue"> Blue<br>
</form>
In the above example, all radio buttons have the same name attribute value of "color". This is what groups them together. By having the same name, selecting one radio button automatically deselects the previously selected radio button within the same group. Only one option can be selected at a time from the group of radio buttons.
Know more about HTML here:
https://brainly.com/question/32819181
#SPJ11
Given any two positive integers, a and b, one can always divide a into b q 1 point times (the quotient) with some remainder r (r< b). In other words, a = bq + r, 0 <= r < b. Assume that a, b, q, r have all been declared as integers and a and b have been initialized. Then we can compute q and r using which of the following statements? There can be more than one answer. a. q = a/b; r = a%b; b. q= a; r = a; q/= b; r %= b; c. r = a-b; q = (a-r)/b; d. r = a%b; q = (a+r)/b; e. None of the above.
The answer to the given problem is option a. q = a/b; r = a%b;The equation can be expressed in the form:a = bq + rThe formula for the quotient is given by the relation q = a/b while that of the remainder is given by r = a % b.
Therefore, the answer is given as a. q = a/b; r = a%b;Option b is not a valid statement for computing the quotient and the remainder. In the given option, both q and r are assigned a before initializing. Hence, this statement is not a valid one for the problem.
The equation for q in the third option is not valid for computing the quotient and remainder. In this option, r is not a valid assignment, hence, it is incorrect. Therefore, this option is also incorrect.The given equation for calculating q in option d is not a valid one. In this option, the calculation of r is the correct one, but the value of q is not correctly computed. Hence, this option is not valid.Therefore, the correct answer is option a. q = a/b; r = a%b;
To know more about equation visit:
https://brainly.com/question/3478337
#SPJ11
Problem 1: (max 30 points) Extend the list ADT by the addition of the member function splitLists, which has the following specification: splitLists(ListType& list1, ListType& list2, ItemType item) Function: Divides self into two lists according to the key of item. Self has been initialized. Precondition: Postconditions: list1 contains all the elements of self whose keys are less than or equal to item's. list2 contains all the elements of self whose keys are greater than item's. a. Implement splitLists as a member function of the Unsorted List ADT. b. Implement splitLists as a member function of the Sorted List ADT. Submission for Unsorted List: (max 10 points for each part a, b, c) a) The templated .h file which additionally includes the new member function spliLists declaration and templated definition. b) A driver (.cpp) file in which you declare two objects of class Unsorted List one of which contains integers into info part and the other one contains characters into info part. Both objects should not have less than 20 nodes. c) The output (a snapshot). Output should be very detailed having not less than 20 lines. All files should come only from Visual Studio. (manual writing of files above will not be accepted as well as files copied and pasted into a doc or pdf document; output should be taken as a snapshot with a black background color ) Submission for Sorted List: (max 10 points for each part a, b, c) The similar parts a), b) and c) as above designed for Sorted list. The requirements are the same as for Unsorted List.
To implement the splitLists member function in the Unsorted List ADT, you would need to iterate through the list and compare the keys of each element with the given item. Based on the comparison, you can add the elements to either list1 or list2. Make sure to update the appropriate pointers and sizes of the lists.
Similarly, for the Sorted List ADT, the implementation of splitLists would involve traversing the sorted list until you find the first element with a key greater than the given item. At this point, you can split the list by updating the pointers and sizes of list1 and list2.
For the submission, you would need to provide the following:
a) A templated .h file for both the Unsorted List ADT and the Sorted List ADT, including the declaration and definition of the splitLists member function.
b) A driver (.cpp) file where you declare two objects of the respective classes, one containing integers and the other containing characters. Ensure that each object has at least 20 nodes.
c) Capture a detailed output snapshot that demonstrates the correct functioning of the code, showing the state of the lists before and after the split operation.
Learn more about ADT list here: brainly.com/question/13440204
#SPJ11
Asume two far dice se rolled compute the probably d geting a sum of 10, given that at kast coe die shows . Choose the right answer a. 1/11 b. 1/10 c. 1/8 d. None of these e. 1/5 f. 1 g. 1/3 h. 0
i. 1/6
The probability of getting a sum of 10 when at least one die shows 5 is 1/11.
To calculate the probability, we need to determine the number of favorable outcomes and the total number of possible outcomes. Given that at least one die shows 5, there are two favorable outcomes: (5, 5) and (5, 6). The total number of possible outcomes is 11, considering all possible combinations of the second die (1, 2, 3, 4, 5, 6) when at least one die shows 5. Therefore, the probability is 2 favorable outcomes divided by 11 possible outcomes, which simplifies to 1/11.
Learn more about probability calculations and dice outcomes here https://brainly.com/question/31388170
#SPJ11
with the help of diagrams, discuss the difference between single
and multiple blocked queue
Single and multiple blocked queues are two of the types of blocked queues that are used in computer science. These types of blocked queues are used to manage the data that is being processed by computer systems.
A single blocked queue is a type of queue that can only process one item of data at a time. This means that if there are multiple items of data waiting to be processed, the queue will only process one item at a time. Once that item has been processed, the next item in the queue will be processed. This type of queue is ideal for systems that have a low volume of data to be processed. A multiple blocked queue is a type of queue that can process multiple items of data at the same time. This means that if there are multiple items of data waiting to be processed, the queue will process as many items as it can at the same time. Once the processing of the data is complete, the next set of data will be processed. This type of queue is ideal for systems that have a high volume of data to be processed. In conclusion, the difference between single and multiple blocked queues is that a single blocked queue can only process one item of data at a time, while a multiple blocked queue can process multiple items of data at the same time. The choice between these two types of queues depends on the volume of data that needs to be processed. If the volume of data is low, a single blocked queue is ideal, while if the volume of data is high, a multiple blocked queue is ideal.
To learn more about queues, visit:
https://brainly.com/question/32196228
#SPJ11
A student have been informed their college tuition has gone up. Although they have been told that education is investment in human capital, which carries a return of roughly 10% a year, they are not pleased. One of the administrators at the university does not make the situation better by saying you pay more because the reputation of the institution is better than that of others. To investigate this hypothesis, you collect data randomly for 100 national universities and liberal arts colleges from the 2000−2001 U.S. News and World Report annual rankings. Next you perform the following regression.
Cost=7,311.17+3,985∗ Reputation −0.20∗ Size +8,406∗ Dpriv −416∗ Dlibart R2=0.72,SER=3,773 where Cost is Tuition, Fees, Room and Board in dollars, Reputation is the index used in U.S. News and World Report (based on a survey of university presidents and chief academic officers), which ranges from 1 ("marginal") to 5 ("distinguished"), Size is the number of undergraduate students, and Dpriv and Dlibart are binary variables indicating whether the institution is private and liberal arts college. 7. Do the coefficients have the expected sign? 8. What is the forecasted cost for a liberal arts college, which has no religious affiliation, a size of 1,500 students and a reputation level of 4.5 ? (All liberal arts colleges are private.) 9. To save money, the student is willing to switch from a private university to a public university, which has a ranking of 0.5 less and 10,000 more students. What is the effect on your cost? 10. Find the Rˉ2 for this equation. Eliminating the Size and Dlibart variables from your regression, the estimation regression becomes Cost =5,450+3,538∗ Reputation +10,935∗ Dpriv R2=0.71,SER=3,792 11. Why do you think that the effect of attending a private institution has increased now? 12. Find the Rˉ2 for the new equation.
A regression analysis was performed, resulting in a regression equation with coefficients and statistical measures. The objective was to understand the impact of these variables on the cost of education.
To determine if the coefficients have the expected sign, we examine the signs of each coefficient in the regression equation. The coefficient for Reputation (3,985) has a positive sign, indicating that as the reputation of the institution increases, the cost of tuition, fees, room, and board also increases. The negative coefficient for Size (-0.20) suggests that larger institutions tend to have lower costs. The positive coefficient for Dpriv (8,406) indicates that private institutions generally have higher costs. The negative coefficient for Dlibart (-416) suggests that liberal arts colleges may have slightly lower costs compared to other institutions.
To forecast the cost for a liberal arts college with no religious affiliation, a size of 1,500 students, and a reputation level of 4.5, we can substitute the values into the regression equation:
Cost = 7,311.17 + (3,985 * 4.5) + (-0.20 * 1,500) + (8,406 * 1) + (-416 * 1)
= 7,311.17 + 17,932.50 - 300 + 8,406 - 416
= $33,933.67
To calculate the effect on cost when switching from a private university to a public university with a ranking 0.5 lower and 10,000 more students, we need to consider the changes in the regression equation:
Change in Cost = (3,985 * -0.5) + (10,000 * -0.20)
= -1,992.50 - 2,000
= -$3,992.50
The effect of switching to a public university would result in a cost reduction of approximately $3,992.50.The Rˉ2 value (coefficient of determination) measures the proportion of the variation in the dependent variable (cost) that can be explained by the independent variables in the regression equation. In the original equation, the Rˉ2 is given as 0.72, indicating that approximately 72% of the variation in cost can be explained by the variables Reputation, Size, Dpriv, and Dlibart.
The increased effect of attending a private institution in the new equation suggests that after controlling for other variables, the impact of attending a private university on cost has become more pronounced. This could be due to various factors, such as rising operational costs, increased demand for private education, or specific characteristics of the institutions included in the analysis.
To learn more about regression click here : brainly.com/question/32505018
#SPJ11
Consider the following classes/interfaces.
public interface GUIElement {
public void addListener(/*...*/);
}
public class SingleButton implements GUIElement {
public SingleButton(String label) {/*...*/}
public void addListener(/*...*/) {/*...*/}
}
public class RadioButtonSet implements GUIElement {
public RadioButtonSet(String[] labels) {/*...*/}
public void addListener(/*...*/) {/*...*/}
}
Rewrite this class hierarchy to use the static factory pattern.
The class hierarchy can be rewritten using the static factory pattern as follows:
```java
public interface GUIElement {
void addListener(/*...*/);
}
public class SingleButton implements GUIElement {
private SingleButton(String label) {
/*...*/
}
public static SingleButton create(String label) {
return new SingleButton(label);
}
public void addListener(/*...*/) {
/*...*/
}
}
public class RadioButtonSet implements GUIElement {
private RadioButtonSet(String[] labels) {
/*...*/
}
public static RadioButtonSet create(String[] labels) {
return new RadioButtonSet(labels);
}
public void addListener(/*...*/) {
/*...*/
}
}
```
In the rewritten class hierarchy, the static factory pattern is applied to the `SingleButton` and `RadioButtonSet` classes. Each class now has a private constructor and a public static factory method named `create` that returns an instance of the respective class.
By using the static factory pattern, the client code can now create instances of `SingleButton` and `RadioButtonSet` classes by calling the `create` methods instead of directly invoking the constructors. This provides more flexibility and encapsulation, as the internal implementation details can be hidden and the factory method can perform any necessary initialization or object pooling.
Learn more about the static factory pattern here: brainly.com/question/23894702
#SPJ11
PLEASE USE PYTHON
index a list to retrieve its elements
use a dictionary to retrieve a value for a given key
check the type of the parameters using the type() function
convert numeric values into a string and vice versa
structure conditional branches to detect invalid values
Introduction
In the previous lab, we have assumed that the provided date would be in the valid format.
In this lab, we will do our due diligence to verify that the provided date_list does indeed contain a proper date. Note: we are using the US format for strings: //. For example, 01/02/2022 can be represented as ['01', '02', '2022'], which represents January 2nd, 2022.
Instructions
Write a function is_valid_month(date_list) that takes as a parameter a list of strings in the [MM, DD, YYYY] format and returns True if the provided month number is a possible month in the U.S. (i.e., an integer between 1 and 12 inclusive).
Write a function is_valid_day(date_list) that takes as a parameter a list of strings in the [MM, DD, YYYY] format and returns True if the provided day is a possible day for the given month. You can use the provided dictionary. Note that you should call is_valid_month() within this function to help you validate the month.
Write a function is_valid_year(date_list) that takes as a parameter a list of strings in the [MM, DD, YYYY] format and returns True if the provided year is a possible year: a positive integer. For the purposes of this lab, ensure that the year is also greater than 1000.
Test Your Code
# test incorrect types
assert is_valid_month([12, 31, 2021]) == False
assert is_valid_day([12, 31, 2021]) == False
assert is_valid_year([12, 31, 2021]) == False
Make sure that the input is of the correct type
assert is_valid_month(["01", "01", "1970"]) == True
assert is_valid_month(["12", "31", "2021"]) == True
assert is_valid_day(["02", "03", "2000"]) == True
assert is_valid_day(["12", "31", "2021"]) == True
assert is_valid_year(["10", "15", "2022"]) == True
assert is_valid_year(["12", "31", "2021"]) == True
Now, test the edge cases of the values:
assert is_valid_month(["21", "01", "1970"]) == False
assert is_valid_month(["-2", "31", "2021"]) == False
assert is_valid_month(["March", "31", "2021"]) == False
assert is_valid_day(["02", "33", "2000"]) == False
assert is_valid_day(["02", "31", "2021"]) == False
assert is_valid_day(["02", "1st", "2021"]) == False
assert is_valid_day(["14", "1st", "2021"]) == False
assert is_valid_year(["10", "15", "22"]) == False
assert is_valid_year(["12", "31", "-21"]) == False
Hints
Use the type() function from Section 2.1 and review the note in Section 4.3 to see the syntax for checking the type of a variable.
Refer to LAB 6.19 to review how to use the .isdigit() string function, which returns True if all characters in are the numbers 0-9.
FINISH BELOW:
def is_valid_month(date_list):
"""
The function ...
"""
# TODO: Finish the function
def is_valid_day(date_list):
"""
The function ...
"""
num_days = {
1: 31,
2: 28,
3: 31,
4: 30,
5: 31,
6: 30,
7: 31,
8: 31,
9: 30,
10: 31,
11: 30,
12: 31
}
# TODO: Finish the function
if __name__ == "__main__":
# test incorrect types
assert is_valid_month([12, 31, 2021]) == False
assert is_valid_day([12, 31, 2021]) == False
assert is_valid_year([12, 31, 2021]) == False
# test the correct input
assert is_valid_month(["01", "01", "1970"]) == True
assert is_valid_month(["12", "31", "2021"]) == True
assert is_valid_day(["02", "03", "2000"]) == True
assert is_valid_day(["12", "31", "2021"]) == True
assert is_valid_year(["10", "15", "2022"]) == True
assert is_valid_year(["12", "31", "2021"]) == True
### test the edge cases
assert is_valid_month(["21", "01", "1970"]) == False
assert is_valid_month(["-2", "31", "2021"]) == False
assert is_valid_month(["March", "31", "2021"]) == False
assert is_valid_day(["02", "33", "2000"]) == False
assert is_valid_day(["02", "31", "2021"]) == False
assert is_valid_day(["02", "1st", "2021"]) == False
assert is_valid_day(["14", "1st", "2021"]) == False
assert is_valid_year(["10", "15", "22"]) == False
assert is_valid_year(["12", "31", "-21"]) == False
The provided code includes three functions: `is_valid_month`, `is_valid_day`, and `is_valid_year`. These functions are used to validate whether a given date, represented as a list of strings in the [MM, DD, YYYY] format, is a valid month, day, and year respectively. The code checks for the correct types of the input elements and performs various validations to determine the validity of the date. Several test cases are provided to verify the correctness of the functions.
```python
def is_valid_month(date_list):
"""
The function checks if the provided month number is a valid month in the U.S. (between 1 and 12 inclusive).
"""
if len(date_list) >= 1 and type(date_list[0]) == str and date_list[0].isdigit():
month = int(date_list[0])
return 1 <= month <= 12
return False
def is_valid_day(date_list):
"""
The function checks if the provided day is a valid day for the given month.
It calls is_valid_month() to validate the month.
"""
if len(date_list) >= 2 and type(date_list[1]) == str and date_list[1].isdigit():
month_valid = is_valid_month(date_list)
day = int(date_list[1])
if month_valid and month_valid is True:
month = int(date_list[0])
num_days = {
1: 31,
2: 28,
3: 31,
4: 30,
5: 31,
6: 30,
7: 31,
8: 31,
9: 30,
10: 31,
11: 30,
12: 31
}
if month in num_days:
return 1 <= day <= num_days[month]
return False
def is_valid_year(date_list):
"""
The function checks if the provided year is a positive integer greater than 1000.
"""
if len(date_list) >= 3 and type(date_list[2]) == str and date_list[2].isdigit():
year = int(date_list[2])
return year > 1000
return False
if __name__ == "__main__":
# test incorrect types
assert is_valid_month([12, 31, 2021]) == False
assert is_valid_day([12, 31, 2021]) == False
assert is_valid_year([12, 31, 2021]) == False
# test the correct input
assert is_valid_month(["01", "01", "1970"]) == True
assert is_valid_month(["12", "31", "2021"]) == True
assert is_valid_day(["02", "03", "2000"]) == True
assert is_valid_day(["12", "31", "2021"]) == True
assert is_valid_year(["10", "15", "2022"]) == True
assert is_valid_year(["12", "31", "2021"]) == True
# test the edge cases
assert is_valid_month(["21", "01", "1970"]) == False
assert is_valid_month(["-2", "31", "2021"]) == False
assert is_valid_month(["March", "31", "2021"]) == False
assert is_valid_day(["02", "33", "2000"]) == False
assert is_valid_day(["02", "31", "2021"]) == False
assert is_valid_day(["02", "1st", "2021"]) == False
assert is_valid_day(["14", "1st", "2021"]) == False
assert is_valid_year(["10", "15", "22"]) == False
assert is_valid_year(["12", "31", "-21"]) == False
```
The `is_valid_month` function checks if the first element of `date_list` is a valid month number.
To know more about python, click here: brainly.com/question/30391554
#SPJ11
This is a subjective question, hence you have to write your answer in the Text-Field given below. 27308 Consider the following use cases carefully to suggest what is going to be your choice of a distributed database as per the design principles of CAP theorem. here te last of type CA, COP or CA? Justify your design choice in each case. [4 marks] 1. metaltrade.com is a real-time commodities trading platform with users from across the globe. Their database is deployed across multiple regional data centers but trades are limited between users within a region. Users need to view the prices in real-time and trades are requested based on this real-time view. Users would never want their committed trades to be reversed. The database clusters are large and failures cannot be ruled out. 2. buymore.com is an online e-retailer. Everyday early morning, the prices of various products (especially fresh produce) are updated in the database. However, the customers can still continue their shopping 24x7. Customer browsing uses the same database and customer churn is very sensitive to page access latency.
In the first use case of metaltrade.com, the choice would be CP (Consistency and Partition tolerance) as it prioritizes consistency and data integrity, which is crucial for trades. In the second use case of buymore.com, the choice would be AP (Availability and Partition tolerance) as it prioritizes availability and low latency for customer browsing, which is critical for customer satisfaction and retention.
1. For metaltrade.com, the choice would be CP (Consistency and Partition tolerance). As a commodities trading platform, data consistency and integrity are of utmost importance to ensure that trades are accurately recorded and committed without any reversals. The real-time view of prices should be consistent across all regional data centers to provide accurate information to users. Although failures cannot be ruled out, maintaining consistency during normal operations is crucial. Partition tolerance is necessary as the database is deployed across multiple regional data centers, enabling trades within a specific region. In the event of network partitions or failures, the system should be able to continue operating and maintaining consistency.
2. For buymore.com, the choice would be AP (Availability and Partition tolerance). As an e-retailer, providing uninterrupted availability for customers is essential to ensure a positive shopping experience. The database is updated with fresh produce prices early morning, but customers can continue shopping 24x7. Low page access latency is crucial to prevent customer churn, as customers are sensitive to delays while browsing and making purchases. Availability is prioritized over strict consistency, as minor inconsistencies in pricing due to eventual consistency are tolerable for an online retail platform. Partition tolerance is necessary to handle potential network partitions or failures while ensuring that the system remains available to customers.
Learn more about inconsistencies : brainly.com/question/11117561
#SPJ11