which statement is true about the insertion of a new node in an avl tree? question 13 options: avltreeinsert updates heights on all child nodes before inserting the node avltreeinsert updates heights on all child nodes after inserting the node avltreeinsert updates heights on all ancestors before inserting the node avltreeinsert updates heights on all ancestors after inserting the node

Answer:

Consider your passions, hobbies, and areas of expertise when brainstorming podcast topics. Some potential ideas could include discussing current events, interviewing experts in a particular field, or sharing personal stories and experiences.

Explanation:

The two statements that are not correct about Harvard architecture are:

1. It has reduced processor performance (performance bottleneck) because program and data cannot be accessed at the same time.
2. It has a higher hardware complexity as compared to von Neumann architecture.

The two statements that are not correct about Harvard architecture are:It has reduced processor performance (performance bottleneck) because program and data cannot be accessed at the same time. This is incorrect as Harvard architecture allows simultaneous access to program and data memory.It has a higher hardware complexity as compared to von Neumann architecture. This is also incorrect as Harvard architecture has a simpler hardware structure than von Neumann architecture.What is Harvard architecture?Harvard architecture is a computer architecture that separates the memory and processing units into two different systems. It has separate memory units for data and instruction processing, making it a more efficient and faster processing system. In the Harvard architecture, instructions and data are stored in different memory units, which are accessed by separate buses.The advantages of the Harvard architecture over the von Neumann architecture include faster processing speeds and simultaneous access to data and instructions, making it more efficient. The Harvard architecture is commonly used in microcontrollers, digital signal processors, and other embedded systems.

Learn more about Harvard architecture here: brainly.com/question/13487745

#SPJ11

The purpose of Dijkstra's algorithm is to find the lowest cost of traveling from one node to another node.

When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Answers should be concise and not provide extraneous amounts of detail. Typos or irrelevant parts of the question should be ignored. It is also important to use the terms mentioned in the question in the answer to address the specific topic being asked about.In response to the specific question "what is the purpose of Dijkstra's algorithm?" the answer is "to find the lowest cost of traveling from one node to another node."Dijkstra's algorithm is a popular algorithm used in computer science and graph theory to solve the shortest path problem for a given graph. This algorithm helps find the shortest path between nodes in a weighted graph, and it does so by computing the minimum distances between any two nodes in the graph. The algorithm calculates the shortest path from the starting node to every other node in the graph. This allows the algorithm to find the shortest distance between any two nodes in the graph, and it is used in many applications, including network routing and logistics optimization.

Learn more about Dijkstra's algorithm here: brainly.com/question/30767850

#SPJ11

The main difference between a hardlink and a symlink in Linux is that a hardlink creates another name for the same file, while a symlink creates a new file that points to the original file by its path.

In Linux, a hardlink and a symlink (symbolic link) are two types of links that can be used to reference a file.

A hardlink is a reference to an actual file on the file system, and it creates another name for the same file. The hardlink and the original file share the same inode, which contains the metadata of the file. If the original file is deleted, the hardlink still points to the same data and the file remains accessible. Hardlinks can only be created for files, not directories, and they can only reference files on the same file system.

On the other hand, a symlink is a reference to a file by its path, which can be absolute or relative. A symlink is a separate file that contains the path to the original file, and it creates a new file that points to the original file. If the original file is deleted, the symlink will be broken and no longer valid. Symlinks can reference files or directories, and they can reference files on different file systems.

In summary, the main difference between a hardlink and a symlink is that a hardlink is a reference to the actual file on the file system, while a symlink is a reference to the file by its path. Hardlinks create another name for the same file, while symlinks create a new file that points to the original file. Additionally, hardlinks can only reference files on the same file system, while symlinks can reference files on different file systems.

To learn more about Linux, visit:

https://brainly.com/question/15122141

#SPJ1

To create a CSS class myfloat that floats to the right of the other page content and has a 10px margin, you can use the following code: ```.myfloat {  float: right; margin: 10px; border: 1px solid black; }``

`In the above code, `.myfloat` is the name of the CSS class. `float: right` makes the content float to the right side of the page. `margin: 10px` sets a 10-pixel margin around the content. `border: 1px solid black` creates a solid 1-pixel black border around the content.

By using the above code, you can create a class according to your requirement.

You can learn more about CSS at: brainly.com/question/14152823

#SPJ11

True. Indeed, corporations build honey pots as a ruse to stave off hackers drawn to a particular computer system.

Organizations employ honey pots as a security measure to trick hackers into attacking a computer system while guarding the actual system from intrusion attempts. Honey pots are created to mimic vulnerable systems or services, drawing attackers in and allowing security experts to analyse their behaviour and tactics without exposing critical data or systems. Honey pots can also act as early warning devices, informing security staff of possible dangers before they can do any harm. Honey pots can be a useful part of a thorough security plan, but they are not completely reliable and shouldn't be used as the only form of defence.

learn more about computer system here:

https://brainly.com/question/30146762

#SPJ4

The type of cloud service that would allow you to provide a cloud-based application to your employees using their smartphones is Mobile cloud computing.

What is mobile cloud computing: Mobile cloud computing is a type of cloud computing that enables cloud computing services to be delivered to mobile devices such as smartphones, tablets, and other mobile devices. The mobile device is a client of the cloud service, which provides the services. The cloud computing infrastructure, which is hosted in data centers, is accessed over the internet.The following are some of the advantages of mobile cloud computing:Access to vast amounts of data and processing power on the cloud can improve the performance of mobile devices.Mobile cloud computing allows for the creation of applications that can run on a variety of devices, including smartphones and tablets, providing a consistent user experience regardless of the device in use.The ability to offload computationally expensive and energy-intensive tasks to the cloud, allowing for a longer battery life on mobile devices.What is Cloud-Based Application?A cloud-based application, often known as Software as a Service (SaaS), is a web-based application that is hosted and managed by a third-party service provider, who is responsible for its servers, databases, and maintenance. Cloud-based applications are accessed through a web browser or a mobile application, and they are typically charged on a subscription basis. These applications are scalable, available on-demand, and can be accessed from anywhere with an internet connection.What are Employees?An employee is an individual who works for a company or organization and is compensated for their time and effort. Employees are frequently categorized as either full-time or part-time, and they are required to follow the company's policies and procedures. Employees' responsibilities and job titles vary based on their positions in the company.

learn more about cloud service here:

https://brainly.com/question/29531817

#SPJ4

When you use the animate() method, you must code a properties map, a duration parameter, and optionally, a callback function and CSS properties to define the animation.

Here's a step-by-step explanation:

1. Create a properties map: This is an object that contains CSS properties and their target values, which define how the elements will be animated.

2. Set a duration parameter: This is a numerical value representing the duration of the animation in milliseconds or a string representing a predefined duration (e.g., "slow", "fast").

3. (Optional) Add a callback function: This function will be executed once the animation is completed.

4. (Optional) Include CSS properties: You can use CSS properties within the properties map to further define the animation's appearance and behavior.

Here's an example of using the animate() method:

```javascript
$("element").animate({
   opacity: 0.5,
   left: "+=50"
}, 1000, function() {
   // This callback function will be executed after the animation is completed
   console.log("Animation completed!");
});
```

In this example, the element will change its opacity to 0.5 and move 50 pixels to the right over 1000 milliseconds. After the animation is completed, the callback function will log "Animation completed!" in the console.

You can learn more about CSS property at: brainly.com/question/7686121

#SPJ11

Amanda's computer likely has self-replicating malware, such as a virus or worm, that has damaged the hard drive and is affecting the computer's operation.

Amanda's computer has a self-replicating program that has damaged the hard drive and is now affecting the computer's operation.

What is self-replicating software?

Self-replicating software refers to a type of malware that can self-replicate or copy itself. The malware is capable of replicating itself without the need for the end user to take any action. The malware spreads quickly and causes damage to the computer system.

A self-replicating program that has damaged the hard drive can lead to data loss and can harm the computer's operation. The computer will begin to slow down, and the user will be unable to run applications, access files, or browse the internet with ease. The virus can spread to other devices that are connected to the infected computer.

Amanda's computer is likely to have a virus or malware that is causing the problems. The best solution is to run an anti-virus program and remove any detected malware. The hard drive may need to be reformatted if the virus has caused significant damage.
Visit here to learn more about malware:

https://brainly.com/question/14276107

#SPJ11

Answer:

+1 404-390-3346

Explanation:

The integer variable would store the integer value of 10 if the user types in the characters 10, and your program reads them into an integer variable.

When the program encounters characters, it reads and converts them into the corresponding integer. So, the number 10 is converted from character data to integer data and then stored in the integer variable.

The value stored in the integer variable when the characters "10" are read into it is 10. Here's a step-by-step explanation:

1. The student question inputs the characters "10".
2. The program reads these characters into an integer variable.
3. The program converts the character "10" to the integer value 10.
4. The integer variable now stores the value 10.

You can learn more about integer variables at: brainly.com/question/27855584

#SPJ11

Digital documents that support concurrent editing and commenting enable real-time collaboration, simple change tracking, and distant collaboration.

Compared to in-person brainstorming sessions, working together on a digital document has significant advantages. The first benefit is that it enables real-time collaboration, allowing team members to work on the document concurrently without the need for follow-up meetings or emails. Second, it makes it simple to track changes, which makes it simpler to maintain track of various document versions. Last but not least, digital documents enable remote collaboration, which is crucial in the modern workplace where many teams operate remotely. Collaboration is facilitated via comment threads in digital documents, which also make it simple for team members to communicate and provide input.

learn more about document here:

https://brainly.com/question/13406067

#SPJ4

Only when you add multiple entries using the insert keyword does the mysql info function provide query information.

To learn more about MySQL, refer to:

https://brainly.com/question/29326730

The MySQL info() function only returns query information when you add multiple records with the INSERT keyword.

What is MySQL?

MySQL is a free, open-source relational database management system (RDBMS). It is a part of the LAMP stack (Linux, Apache, MySQL, PHP/Perl/Python).

What is the info() function?

The mysql_info() function in MySQL is a PHP built-in function that retrieves the number of affected rows by the previous MySQL operation. It also returns the last inserted ID if the operation was an insert query. The MySQL server returns detailed information for most queries performed by the user.

As a result, calling the info() function with no arguments provides information about the most recent query. However, if you execute an INSERT query with multiple records, the info() function returns the number of records affected by the operation.

For example: mysql_query (INSERT INTO mytable (name, phone) VALUES ('John Smith', '123-456-7890'); ('Jane Doe', '555-555-5555)); $info = mysql_info();echo $info; // returns "Records: 2 Duplicates: 0 Warnings: 0"

Here, the query inserts two records into the mytable table, and the info() function returns that two records were affected.

Learn more about MySQL here:

https://brainly.com/question/13267082

#SPJ11

When a group or user group policy setting is in the scope of a GPO, it is managed by the GPO. If the scope is changed to its original configuration outside the GPO, it is called the local scope.

Group Policy Objects (GPOs) are a Microsoft Windows NT-based operating system component that administers the security and operating system settings for users and computers in an organization.The GPO can be divided into two distinct components: the Group Policy Container (GPC) and the Group Policy Template (GPT).The GPC keeps track of the GPO name, domain name, version number, unique identifier, and information about where to locate the GPT. On the other hand, the GPT contains all of the data and information that the GPO contains, such as registry entries, script files, and text files.User Group Policy SettingsThe User Configuration node contains the majority of the GPO's user settings. The user settings' scope may be limited to a single site, domain, or OU. There are several subcategories in User Configuration that specify different configurations for users. Some of these settings are:Desktop: This policy deals with the settings that pertain to the appearance and configuration of the desktop.Backgrounds: It deals with the settings that define the desktop background and its appearance.Start Menu and Taskbar: This policy deals with the Start menu, Quick Launch, and Taskbar features.

Learn more about GPO here:

https://brainly.com/question/31066652

#SPJ11

1) CPU Allocation:

In a virtual machine environment, the host operating system manages the CPU resources and allocates virtual CPU cores to each VM.

Memory Allocation:

Memory allocation in a virtual machine environment involves allocating virtual memory to each VM.

Storage Allocation:

In a virtual machine environment, each VM is allocated virtual disks that are mapped to physical disks on the host system.

Network Interface Allocation:

In a virtual machine environment, each VM is allocated a virtual network interface that is mapped to a physical network interface on the host system.

2) Possible Issues:

Resource Contention.

Hardware Incompatibility.

Security Risks.

Complexity.

The number of virtual CPU cores allocated to a VM can be configured to ensure that each VM gets an adequate share of the host's CPU resources. However, if the number of VMs running on the host exceeds the number of physical CPU cores available, it may lead to performance degradation due to CPU contention.

The host operating system manages the physical memory and assigns virtual memory to each VM based on its requirements. However, if the host system runs out of physical memory, it may lead to excessive swapping, which can degrade the performance of the VMs.

The host operating system manages the storage and allocates virtual disks to each VM based on its requirements. However, if multiple VMs compete for the same physical disk, it may lead to storage contention and degrade the performance of the VMs.

The host operating system manages the network interfaces and allocates virtual network interfaces to each VM based on its requirements. However, if multiple VMs compete for the same physical network interface, it may lead to network contention and degrade the performance of the VMs.

Overall, a virtual system can be an effective solution for many organizations, but it is important to carefully consider the potential issues and challenges that may arise and take steps to mitigate them.

Learn more about virtual system: https://brainly.com/question/29514884

#SPJ11

We can advise the computer designer to target a clock rate of 5.2 GHz for computer B in order to run the program in 4 seconds with 1.3 times as many clock cycles as computer A.

Clock Rate is the number of clock cycles a CPU (Central Processing Unit) can perform in one second. It is measured in GHz (Gigahertz). The clock rate of a computer is used to determine how many instructions it can process in one second.

To determine the target clock rate for computer B in order to run the program in 4 seconds with 1.3 times as many clock cycles as computer A, we can use the following steps:

Given:

Time taken by computer A to run the program = 8 seconds

Clock rate of computer A = 2 GHz

We can use the formula:

Clock cycles = Time taken * Clock rate

Substituting the values:

Clock cycles for computer A = [tex]8 * 2 = 16[/tex] billion cycles

Since computer B requires 1.3 times as many clock cycles as computer A, we can multiply the clock cycles of computer A by 1.3 to get the desired clock cycles for computer B:

Desired clock cycles for computer B = 1.3 * Clock cycles for computer A

Substituting the value of clock cycles for computer A:

Desired clock cycles for computer B = [tex]1.3 * 16[/tex] billion cycles

Given:

Time taken by computer B to run the program = 4 seconds (as per the requirement)

Desired clock cycles for computer B (calculated in step 2)

We can rearrange the formula used in step 1 to solve for the target clock rate for computer B:

Clock rate for computer B = Desired clock cycles / Time taken

Substituting the values:

Clock rate for computer B = [tex]\frac{(1.3 * 16)}{4}[/tex]

Calculating the value:

Clock rate for computer B = 5.2 GHz

So, in order to complete the programs in 4 seconds with 1.3 times as many clock cycles as computer A, we can advise the computer designer to set a target clock rate of 5.2 GHz for computer B.

Learn more about clock rate

brainly.com/question/12950625

#SPJ11

The total number of available IP addresses in a /26 subnet is 64 IP addresses. Excluding 12 IP addresses for network devices, the remaining 52 IP addresses are available for DHCP client assignment.

When you configure a router as a DHCP server and make a pool with the range 172.16.31.0 /26. The total number of available IP addresses in a /26 subnet is 64 IP addresses. 12 IP addresses are reserved for network devices. As a result, the remaining number of IP addresses that can be leased out to clients is 52.To clarify, a /26 subnet contains 64 IP addresses. The first three octets of the IP address in the given subnet, 172.16.31.0/26, are fixed, and the last octet has a 26-bit mask, allowing for 6 host bits. This equals 64 IP addresses. Excluding 12 IP addresses for network devices, the remaining 52 IP addresses are available for DHCP client assignment.

Learn more about DHCP here:

https://brainly.com/question/15308834

#SPJ11

If no packet is received as a response during a null scan, it is most likely because the targeted system has an active firewall or intrusion detection system that is blocking or filtering incoming traffic.

During a null scan, the most likely cause of no packet receipt is that the targeted system has an active firewall or intrusion detection system that is blocking or filtering incoming traffic. A null scan is a stealthy and passive scanning technique that is used by attackers to gather information about a target system without generating any traffic. A null scan is conducted by sending a TCP packet with all flags set to zero, which is known as a null packet or a null probe.A null scan can be used to detect open ports on a target system because if a port is closed, the target system should respond with a TCP RST (reset) packet. However, if the port is open, the target system will not respond with any packet because the TCP protocol requires an acknowledgement (ACK) packet in response to a SYN packet to establish a connection. Since a null packet has no flags set, it does not initiate a connection and does not receive any response.

Learn more about packet here:

https://brainly.com/question/17009080

#SPJ11

SQL commands executed d. all of the above

columns from table like '%name' ;  first name , store name ,company name

When the SQL command "SHOW COLUMNS FROM table LIKE '%name';" is executed, the column names that are displayed are a. first name. store name. company named. all of the above. What is the purpose of the SQL command "SHOW COLUMNS"?SHOW COLUMNS is an SQL command that retrieves column details from a table. It returns all of the columns and their details, such as their data type, nullability, and default value. It also allows users to filter columns based on specific criteria, such as column name or data type. The syntax for SHOW COLUMNS is as follows: SHOW COLUMNS FROM table_name [LIKE 'pattern']According to the question, the SQL command "SHOW COLUMNS FROM table LIKE '%name';" is executed. When this command is executed, all columns that have "name" in their name will be returned as a result. As a result, the column names' first name, store name, and company name are all returned as results. As a result, the correct response is d. all of the above.
visit here to learn more about  SQL commands:

https://brainly.com/question/30168204

#SPJ11

The correct answer choices are "the binary tree must be complete" and "the value stored at every node is less than or equal to the values stored at either of its child nodes (min heap)."

For a binary tree to be considered a heap, the following conditions must be imposed:

1. The binary tree must be complete, meaning that every level of the tree is fully filled, except possibly for the last level, which should be filled from left to right.

2. The value stored at every node is either less than or equal to the values stored at its child nodes (min heap) or greater than or equal to the values stored at its child nodes (max heap).

You can learn more about binary trees at: brainly.com/question/13152677

#SPJ11

The constraints that its parent places upon it primarily determine the position and size of a particular widget in Flutter.

In Flutter, the position and size of a particular widget are primarily determined by the constraints that its parent places upon it. Each widget in Flutter has its own constraints, which specify the minimum and maximum sizes that the widget can occupy on the screen. These constraints are then passed up the widget tree to the parent widget, which can further constrain the size and position of its children. The constraints are used to determine the layout of the widgets in the user interface and are an essential part of Flutter's reactive programming model. The theme data of the parent widget and the pixel density of the device screen can affect the appearance of the widget but do not directly determine its size or position. The BuildContext is used to identify the location of the widget in the widget tree but does not directly affect its layout.

learn more about widget

brainly.com/question/30887492

#SPJ4

The correct answer is: length, indexOf, and charAt. The methods that are in both the string and StringBuilder classes are length, indexOf, and charAt.

The methods that are in both the string and StringBuilder classes are length, indexOf, and charAt. The length() method returns the length of the string or StringBuilder, the indexOf() method returns the index of a specific character or substring within the string or StringBuilder, and the charAt() method returns the character at a specific index within the string or StringBuilder.The toUpperCase() method is only available in the String class, and it returns the string in all uppercase characters. The parseDouble() method is only available in the Double class, and it converts a string into a double value.

Learn more about the string here:

https://brainly.com/question/13041382

#SPJ11

Answer:

a) Presentation Software

Location-based networking provides a platform for users to carry out interactions based on their current locations. Location-based networking is a type of networking that allows users to interact with each other based on their current locations.

It is a feature that is present in many social networking and messaging applications, allowing users to find and connect with others who are nearby. In location-based networking, users can find and communicate with other people who are nearby.

This can be useful for social networking, dating, and other applications that require location-based information. Location-based networking can be used to find people who share similar interests, businesses, and services in the area, and events that are happening nearby.

These apps use the location data provided by the user's device to show them nearby people or places that they may be interested in. Location-based networking has become more popular in recent years due to the widespread adoption of smartphones and other mobile devices that can easily transmit location data.
Geolocation-based networking provides a platform for users to carry out interactions based on their current locations.

Learn more about Location-based networking

https://brainly.com/question/29767929

#SPJ11

Here's an example MIPS assembly program that implements linear search to find a number entered by the user in an array of 20 integers:

.data

array:  .word   4, 5, 8, 9, 1, 3, 10, 7, 6, 15, 20, 11, 14, 12, 16, 19, 2, 18, 17, 13

message1: .asciiz "Enter a number to search for: "

message2: .asciiz "The number was found at index "

message3: .asciiz "The number was not found."

.text

.globl main

# procedure to search for a number in an array

# arguments: $a0 - pointer to the array

#            $a1 - size of the array

#            $a2 - number to search for

# returns:   $v0 - index of the number in the array, or -1 if not found

linear_search:

   addi $sp, $sp, -8     # allocate space on the stack

   sw   $ra, 0($sp)      # save the return address

   li   $t0, 0           # initialize index to 0

loop:

   beq  $t0, $a1, not_found   # if index == size, return -1

   lw   $t1, ($a0)        # load the array element at index i

   beq  $t1, $a2, found       # if element == number, return i

   addi $t0, $t0, 1      # increment index

   addi $a0, $a0, 4      # advance array pointer

   j    loop

found:

   move $v0, $t0         # set the return value to the index

   j    done

not_found:

   li   $v0, -1          # set the return value to -1

done:

   lw   $ra, 0($sp)      # restore the return address

   addi $sp, $sp, 8      # deallocate space on the stack

   jr   $ra              # return to the caller

# main program

main:

   li   $v0, 4           # print message asking for input

   la   $a0, message1

   syscall

   li   $v0, 5           # read in the number to search for

   syscall

   move $a2, $v0         # store the number to search for in $a2

   la   $a0, array       # set array pointer in $a0

   li   $a1, 20          # set array size in $a1

   jal  linear_search    # call linear search procedure

   beq  $v0, -1, not_found   # if return value is -1, print not found message

   li   $v0, 4           # print found message

   la   $a0, message2

   syscall

   move $a0, $v0         # print the index of the number

   li   $v0, 1

   syscall

   j    done

not_found:

   li   $v0, 4           # print not found message

   la   $a0, message3

   syscall

done:

   li   $v0, 10          # exit program

   syscall

Note that this program initializes the array with

Network congestion is a circumstance in which a network connection slows or fails because the network can't handle the amount of traffic or data being transmitted at the time.

When comparing the two events, receiving triple duplicate acknowledgement and timeout, the one that indicates the network congestion level is more serious is receiving triple duplicate acknowledgement. There are a variety of explanations for network congestion, and there are a variety of ways to address it. Acknowledgement Triple Duplicate When a packet is transmitted, it is generally acknowledged by the recipient. When the sender fails to obtain an acknowledgement after a certain amount of time has elapsed, a timeout occurs. When the receiving end receives three of the same acknowledgement messages, it is referred to as receiving triple duplicate acknowledgement. In a congested network, receiving triple duplicate acknowledgement is more likely to occur than timeout. When the network congestion level is more severe, packets take longer to reach their intended destination, causing multiple duplicate acknowledgements to be generated. As a result, receiving triple duplicate acknowledgements indicates a more serious network congestion level.

Learn more about Network congestion here:

https://brainly.com/question/4658841

#SOJ11

Systems design is a crucial aspect of the development process, as it outlines the functional and operational requirements of a system to meet the specified information needs. This process typically involves a group of answer choices that address different aspects of the system, including its purpose, functionality, and overall design.

1)One of the primary objectives of systems design is to determine what a system should do to meet its information requirements. This entails understanding the necessary inputs, processes, and outputs that the system must manage to satisfy the needs of its users.

2)Another aspect of systems design involves showing how the new system will fulfill these information requirements. This is achieved by creating detailed design specifications, such as data flow diagrams or flowcharts, that illustrate how information will be processed and managed within the system.

3)Systems design also identifies which users need what information, where, when, and how. This is essential for ensuring that the system provides the right information to the right people at the right time and in the appropriate format. This often involves gathering user requirements and developing use cases to ensure that the system meets the diverse needs of its intended users.

4)Lastly, systems design is concerned with the logical view of the system solution. This involves focusing on the relationships between the different components of the system, as well as how data is processed, stored, and accessed. By considering the logical view, designers can create a more efficient and effective system that meets its intended purpose.

5)In summary, systems design is a vital process in the development of any system, as it outlines the functional and operational requirements necessary to meet the specified information needs. This process involves determining what the system should do, how it will fulfill these requirements, identifying user needs, and focusing on the logical view of the system solution.

For such more question components

https://brainly.com/question/28351472

#SPJ11

Selection sort is an algorithm that works by iteratively selecting the smallest element from the unsorted part of an array and swapping it with the element at the beginning of the unsorted section. This process is repeated for each index, with the sorted section growing by one element each time.

1)Initially, the whole array is considered unsorted. The algorithm starts at the first index, searches for the minimum value among the unsorted elements, and then swaps that minimum value with the value at the first index. Now, the first element is sorted, and the unsorted section starts from the second index.

2)The algorithm continues by finding the minimum value in the remaining unsorted section, starting from the second index. Once found, this minimum value is swapped with the value at the second index. Now, the first two elements are sorted, and the unsorted section starts from the third index.

3)This process is repeated for each index until the entire array is sorted. By iteratively selecting the smallest element from the unsorted part and swapping it with the current index, selection sort efficiently sorts the array in ascending order.

4)In summary, selection sort works by dividing the array into a sorted and an unsorted section. It iteratively finds the smallest element in the unsorted section and swaps it with the first unsorted element, effectively expanding the sorted section and reducing the unsorted section until the whole array is sorted.

For more such question on algorithm

https://brainly.com/question/13902805

#SPJ11

Answer:

Explanation:

i+=i means the i now adds its current value to its self so let's say i equals 10 using this += expression the value of i will now equal 20 because you just added 10 to its self.