which of the methods can be used to improve the resolution between two compounds for a liquid separation using a packed chromatography column?

The excess reagent is FeCl₃ and 0.33 moles of FeCl₃ remains unreacted after igniting 3.00 moles of FeCl₃ with 2.00 moles of O₂ gas.

The balanced chemical equation for the reaction between FeCl₃ and O₂ is:

4 FeCl₃ + 3 O₂ → 2 Fe₂O₃ + 6 Cl₂

From the balanced equation, we can see that for every 4 moles of FeCl₃, we need 3 moles of O₂.

To determine what is the excess reagent and how much of it is left over, we need to calculate the amount of each reagent required for complete reaction:

3.00 moles FeCl₃ × (3 moles O₂/4 moles FeCl₃) = 2.25 moles O₂ required

2.00 moles O₂ × (4 moles FeCl₃/3 moles O₂) = 2.67 moles FeCl₃ required

Since we only have 2.00 moles of O₂ available, this is the limiting reagent and there is not enough O₂ to react completely with all 3.00 moles of FeCl₃. Therefore, FeCl₃ is the excess reagent.

The amount of excess reagent remaining can be calculated by subtracting the amount required for complete reaction from the amount initially present:

Excess FeCl₃ = 3.00 moles - 2.67 moles = 0.33 moles

Therefore, there is an excess of 0.33 moles of FeCl₃ remaining unreacted. There is no excess of O₂ remaining, as we started with less than the amount required for complete reaction.

Learn more about excess reagent here: https://brainly.com/question/29109077.

#SPJ11

In valence bond theory,

covalent

bonds are described in terms of the overlap of atomic or hybrid orbitals. This statement is true. Covalent bonds are described in terms of the overlap of atomic or hybrid orbitals

A covalent bond is a chemical bond that arises from the mutual sharing of electrons between atoms. It is formed when two atoms share a pair of electrons, with each atom contributing one electron to the pair.

In valence bond theory, covalent bonds are explained by the overlap of atomic or hybrid orbitals.

Orbitals

are regions of space around an atomic nucleus where an electron is most likely to be found.

An atomic orbital can hold a maximum of two electrons with opposite spins. Each atom has a certain number of valence electrons in its outermost shell.

These valence electrons can participate in the formation of chemical bonds.

During the formation of a covalent bond, the valence orbitals of the two atoms overlap with each other, allowing their valence

electrons

to interact and form a shared electron pair.

The degree of overlap between the atomic orbitals determines the strength of the covalent bond. The greater the overlap, the stronger the bond. The shape of the orbitals also affects the type of bond that is formed.

For example, when two s orbitals overlap, a sigma bond is formed, while when two p orbitals overlap, a pi bond is formed.

In hybrid orbitals, the orbitals of different shapes and energies can combine to form a new set of orbitals that are better suited for bonding.

In valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. This theory explains how atoms bond with each other and form new molecules.

to know more about

covalent

refer here:

https://brainly.com/question/30261436#

#SPJ11

Answer: For a solution treated aluminum alloy, the aging needed to achieve a yield strength of 400 MPa would be 20 minutes.

What is solution heat treatment?

Solution heat treatment is a procedure used to dissolve a metal's alloying components in a solid solution. Solution heat treatment is used in the production of a homogeneous, single-phase microstructure that is free of precipitates or undissolved alloying components.

It is also known as homogenization in the metallurgical industry. The procedure generally involves heating the metal to a high temperature for an extended period of time, followed by rapid quenching or cooling to room temperature to freeze the solid solution in place.

What is the aging of alloys?

Aging of alloys is a post-heat treatment procedure in which an alloy is heated at a certain temperature and held for a certain length of time to promote the formation of precipitates in the metal.

This is the final heat treatment in the production of many metal alloys, and it can help to boost their strength and toughness by allowing the formation of a highly ordered and dispersed precipitate structure that resists dislocation movement and grain boundary migration. Precipitation hardening is another name for aging.



Learn more about electric field here:

https://brainly.com/question/5749278#


#SPJ11

The correct answer is C. Silicon and Germanium are semiconductor elements. A semiconductor is a material that has properties of both an insulator and a conductor.

It can be used to create transistors, which are components that can be used to amplify or switch electronic signals.

Semiconductor elements are made up of different atoms that have at least four electrons in their outer shell. The four electrons are what gives them their semi-conductive properties.

Silicon and Germanium are two of the most common semiconductor elements.

Silicon is the most widely used semiconductor element. It has four electrons in its outer shell and is found in nature as a component of sand and quartz.

Silicon has the ability to easily form bonds with other atoms, which makes it a great choice for semiconductor devices.

Germanium is also a commonly used semiconductor element. It has four electrons in its outer shell and is a component of coal and many other minerals.

Germanium has a slightly higher electron mobility than Silicon, which makes it better suited for certain types of transistors.

In conclusion, Silicon and Germanium are semiconductor elements. They have four electrons in their outer shell and are used in transistors and other semiconductor devices.

Silicon is the most widely used semiconductor element due to its ability to form strong bonds with other atoms, while Germanium is better suited for certain types of transistors due to its higher electron mobility.

to know more about semiconductor refer here:

https://brainly.com/question/15184439#

#SPJ11

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

Answer: Molecules in which three atoms are arranged in a straight line are said to have linear geometry.

What is a linear molecule?

A linear molecule is a molecule that has three or more atoms arranged in a straight line. Two main groups of linear molecules exist: homonuclear and heteronuclear. A homonuclear linear molecule has two or more identical atoms bonded to the central atom, whereas a heteronuclear linear molecule has two or more distinct atoms bonded to the central atom.

Examples of linear molecules include carbon dioxide (CO2), hydrogen cyanide (HCN), nitrogen dioxide (NO2), and sulfur dioxide (SO2).

Linear geometry is the shape of the molecule, which is governed by its geometry. The distribution of bonding electrons and non-bonding pairs in a molecule determines its shape. For instance, in a molecule with linear geometry, the bond angle between two atoms is 180 degrees (a straight line).


Learn more about linear molecule here:

https://brainly.com/question/16770400#



#SPJ11

Acetaldehyde (CH3CHO) is a polar molecule due to its asymmetric shape and presence of polar covalent bonds.

The polarity is caused by the oxygen-hydrogen bond dipoles, as oxygen has a greater electronegativity than the hydrogen. This causes the oxygen to attract the electrons from the bond, creating a net dipole.

Acetaldehyde is a polar molecule. The polar character of a molecule is determined by the shape and polarity of its bonds. When the molecule has polar bonds and an asymmetrical shape, it is said to be polar. On the other hand, if it has no polar bonds or symmetrical shape, it is nonpolar.

Acetaldehyde is a polar molecule due to the electronegativity difference between carbon and oxygen, which creates a polar bond. It also has an asymmetrical shape due to the presence of two electronegative oxygen atoms on either side of the central carbon atom. As a result, acetaldehyde is soluble in polar solvents like water, ethanol, and acetone.

Read more about carcinogenic :

https://brainly.com/question/984334

#SPJ11

The molecular shape is determined by the number of electron domains around a central atom where an electron domain can be a lone pair, a single bond, or a multiple bond.

The molecular geometry is determined by the type and number of electron domains on the central atom. The electron domain geometry is determined by the number of electron domains around the central atom.

Both the electron and molecular geometry of a compound can be identified using the VSEPR theory (Valence Shell Electron Pair Repulsion). The molecular geometry is determined by the type and number of electron domains on the central atom.

The electron domain geometry is determined by the number of electron domains around the central atom. Electron domains are regions of space around the central atom that contain an electron pair. When lone pairs or multiple bonds are present, these domains are also counted.

The electron domain geometry is the term used to describe the shape of the molecule based on the number of electron domains present on the central atom.

To know more about electrons, refer here:

https://brainly.com/question/29731362#

#SPJ11

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

If the balloon is popped and all of the CO2 is released, approximately 5.4 grams of CO2 would be released.

At STP (Standard Temperature and Pressure), the pressure is 1 atmosphere (atm) and the temperature is 273.15 K (0 °C or 32 °F).Any ideal gas has a molar volume of 22.4 L/mol at STP.

Carbon dioxide (CO2) seems to have a molar mass of approximately 44 g/mol.

Using the ideal gas law, PV = nRT, we can calculate the number of moles of CO2 in the balloon:

PV = nRT

n = PV/RT

n = (1 atm)(3 L)/(0.0821 L·atm/mol·K)(273.15 K)

n = 0.1226 mol

Therefore, the balloon contains 0.1226 mol of CO2.

To calculate the mass of CO2, we can use the following formula:

mass equates to the number of moles multiplied by the molar massmass = 0.1226 mol x 44 g/mol

mass = 5.4 g

To know more about ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1

The mole fraction of sodium hypochlorite is 0.012.

To find the mole fraction of sodium hypochlorite (NaClO) in the solution, we need to first calculate the total number of moles of solute (NaClO) and solvent (water) in the solution.

Let's assume 1 L of solution. The number of moles of NaClO in the solution is equal to the concentration of NaClO multiplied by the volume of the solution:

moles of solute = concentration × volume = 0.650 mol/L × 1 L = 0.650 moles

Next, find the volume of the solute in the solution by multiplying the number of moles by its molar mass and dividing it buy its density.

volume of solute = number of moles x molar mass x density = 0.650 moles(74.44 g/mol) / ( 1.206 g/mL) = 40.121 mL

Therefore, there are 40.121 mL of solute in 1 liter of solution. Hence, the volume of water is:

volume of water = 1000 mL - 40.121 mL = 959.879 mL

Using the density of water and its molar mass, find the number of moles of water.

moles of water = 959.879 m(1 g/mL) / (18 g/mol) = 53.327 mol

Therefore, 1 liter of solution contains 0.650 moles of NaClO and 53.327 moles water. The mole fraction (χ) of NaClO is defined as the number of moles of NaClO divided by the total number of moles in the solution. Solving for the mole fraction of NaClO, we get:

mole fraction = 0.650 moles / (0.650 moles + 53.327 moles) = 0.012

Learn more about mole fraction here: https://brainly.com/question/14783710.

#SPJ11

Answer:

5.41 M

Explanation:

To calculate the molarity of a saturated solution of NaCl, we first need to calculate the amount of NaCl in the solution:

35.8 g of NaCl per 135.8 g of solution means that the mass of NaCl in the solution is:

mass of NaCl = 35.8 g

The density of the solution is 1.20 g/mL, so the volume of the solution can be calculated as:

volume of solution = mass of solution / density of solution

volume of solution = 135.8 g / 1.20 g/mL

volume of solution = 113.17 mL

Now we need to convert the volume of the solution to liters:

volume of solution = 113.17 mL = 0.11317 L

To calculate the molarity of the solution, we need to know the number of moles of NaCl in the solution. We can calculate this using the formula:

moles of solute = mass of solute / molar mass of solute

The molar mass of NaCl is 58.44 g/mol, so:

moles of NaCl = 35.8 g / 58.44 g/mol

moles of NaCl = 0.612 mol

Now we can calculate the molarity of the solution using the formula:

molarity = moles of solute / liters of solution

molarity = 0.612 mol / 0.11317 L

molarity ≈ 5.41 M

Answer: The term for the weighted average mass of all the naturally occurring isotopes of an element is atomic mass.

This is also known as the atomic weight and is the mass of a single atom of the element. It is calculated by taking the weighted average of the masses of all the isotopes of an element.

The isotopes are weighted according to their abundance in nature. The atomic mass is typically expressed in atomic mass units (amu) or in daltons (Da). The atomic mass is an important factor in determining the chemical and physical properties of an element. It is also used in calculating the energy released during nuclear reactions.

Learn more about atomic mass here:

https://brainly.com/question/17067547#


#SPJ11

To determine the percent yield, we need to first calculate the theoretical yield of the reaction using stoichiometry, and then divide the actual yield by the theoretical yield and multiply by 100%. The percent yield of the reaction is approximately 84.9%.

Percent yield is a measure of the efficiency of a chemical reaction, calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying by 100%. It represents the percentage of the theoretical amount of product that was actually obtained in a reaction.

The balanced chemical equation is:

2Al + Cr₂O₃ → Al₂O₃ + 2Cr

The molar mass of Cr₂O₃ is 152 g/mol, the molar mass of Al is 27 g/mol, and the molar mass of Cr is 52 g/mol.

We need to determine which reactant is limiting, so we can calculate the theoretical yield based on the amount of limiting reactant. We can do this by calculating the number of moles of each reactant using their molar masses and dividing by their stoichiometric coefficients in the balanced equation:

moles of Cr₂O₃= 44.1 g / 152 g/mol = 0.29 mol

moles of Al = 35.0 g / 27 g/mol = 1.30 mol

From the balanced equation, we see that 1 mole of Cr2O3 reacts with 2 moles of Cr. Therefore, the theoretical yield of Cr is:

moles of Cr produced = 0.29 mol Cr₂O₃x (2 mol Cr / 1 mol Cr₂O₃) = 0.58 mol Cr

mass of Cr produced = 0.58 mol Cr x 52 g/mol = 30.16 g Cr

The percent yield is:

% yield = (actual yield / theoretical yield) x 100%

% yield = (25.6 g Cr / 30.16 g Cr) x 100% = 84.9%

Therefore, the percent yield of the reaction is approximately 84.9%.

To find out more about percent yield, visit:

https://brainly.com/question/17042787

#SPJ1

Carbon and other types of matter can move through the environment through a combination of physical, biological, and human processes.

Matter, including carbon, can move through an environment in several ways, including:

Diffusion: Diffusion is the movement of particles from an area of high concentration to an area of low concentration. Carbon can diffuse through the air or water from areas where it is more concentrated to areas where it is less concentrated.

Advection: Advection is the movement of matter due to the flow of a fluid, such as air or water. Carbon can be transported through the environment by advection, for example, by wind carrying carbon particles or by water currents transporting dissolved carbon.

Biogeochemical cycling: Carbon can also be cycled through the environment by biological and geological processes. Plants and algae take up carbon dioxide from the air or dissolved carbon from water and convert it into organic matter through photosynthesis. This organic matter can then be consumed by other organisms, leading to the transfer of carbon through the food chain. Carbon can also be stored in soils and sediments for long periods of time.

Human activities: Human activities can also move carbon through the environment. For example, the burning of fossil fuels releases carbon dioxide into the atmosphere, which can then be transported by diffusion and advection. Land-use changes, such as deforestation, can also affect the cycling of carbon through the environment.

Learn more about matter here: https://brainly.com/question/3998772

#SPJ1

NADH is produced during the catabolic reactions of glycolysis, the Krebs cycle, and oxidative phosphorylation in the mitochondria.

NADH (Nicotinamide adenine dinucleotide) is an important molecule involved in cellular respiration and energy production. The production of NADH is dependent on the availability of oxygen and glucose, which serve as electron acceptors in these metabolic pathways.

However, under anaerobic conditions where oxygen is limited or unavailable, such as during intense exercise or in some microorganisms, NADH production may still occur through fermentation pathways. In these pathways, pyruvate is converted to lactate or ethanol, regenerating NAD+ to allow for further ATP production through glycolysis.

Learn more on chemical equilibrium here: https://brainly.com/question/5081082

#SPJ1

you need to draw and label a flowchart and carry out a degree-of-freedom analysis of the reactor based on the extent of reaction, then calculate the total moles of gas in the reactor at equilibrium and the equilibrium mole fraction of hydrogen in the product.

If the mole fraction of hydrogen is significantly different from the calculated value, the discrepancy can likely be attributed to an imbalance between the reactants and products.

You can use a numerical method of your choice to take the input of the reactor temperature and the feed component mole fractions of CO, H2O, and CO2 to calculate the mole fraction H2 x in the product gas when equilibrium is reached.

From there, you can adjust the temperature and feed composition to maximize the yield of hydrogen.

To know more about mole fraction click on below link:

https://brainly.com/question/29808190#

#SPJ11

The density of the metal is 1.167 g/ml.

The density of the metal can be calculated using the formula for density, ρ:

ρ = m /v

where ρ is the density, m is the mass, and v is the volume.

In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.

Using the formula, the density of the metal is then:

ρ = 31.5 g / 27mL

ρ = 1.167 g/ml

This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

The number of moles of Na3PO4 that will be formed would be 2 moles.

The balanced chemical equation for the reaction between NaOH and H3PO4 is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

According to the equation, 3 moles of NaOH react with 1 mole of H3PO4 to produce 1 mole of Na3PO4. Therefore, we can use this ratio to find out how many moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4:

Moles of Na3PO4 = (6 mol NaOH) x (1 mol Na3PO4 / 3 mol NaOH)

= 2 mol Na3PO4

So, 2 moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1

CsI  (cesium iodide) is expected to have a more negative enthalpy of solution compared to LiF (lithium fluoride), assuming the same solvent is used and the solvent-solute interactions are the same in both cases.

The enthalpy of solution is the energy released or absorbed when a solute dissolves in a solvent. The enthalpy of solution is negative if energy is released when the solute dissolves, indicating that the solution is exothermic.

CsI is expected to have a more negative enthalpy of solution compared to LiF because CsI has larger ions with a higher charge than LiF, and larger ions with higher charge tend to have stronger interactions with solvent molecules, leading to a more negative enthalpy of solution.

Learn about enthalpy here https://brainly.com/question/3836944

#SPJ1

Answer:

74g.

Explanation:

The volume won't increase by the volume of salt you added, though. This is for many different reasons among them the fact that salt is in grains (with lots of air in between) and the salt dissolving in the water and kind of squeezing in the spaces between water molecules. But the mass should increase by exactly the 19g you added.

Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.

1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.

To learn more about picric acid; https://brainly.com/question/14866072

#SPJ11

Answer: covalent networks

The complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is known as hydrolysis.

Hydrolysis is the process of breaking down a compound by adding water to it. It is a chemical process in which water reacts with minerals to form new compounds with new structures. The process is a crucial part of the formation of clay minerals. Hydrolysis is a common process in nature and occurs when water reacts with minerals to form new compounds. This reaction occurs in soil, rocks, and other natural materials.

The hydrolysis process breaks down minerals such as feldspar and releases other minerals like aluminum and iron oxides. The hydrolysis of silicate minerals such as feldspar creates clay minerals. This process is responsible for the formation of clay minerals, which are an important component of soil.

Read more about silicate :

https://brainly.com/question/4938885

#SPJ11

Answer:

The -CHO group is known as the aldehyde functional group. Here are some examples of organic compounds containing the -CHO functional group:

Methanal (formaldehyde)

Ethanal (acetaldehyde)

Propanal (propionaldehyde)

Butanal (butyraldehyde)

Pentanal (valeraldehyde)

IUPAC names of the requested compounds are:

4th member of carboxylic acid: butanoic acid

1st member of amide: formamide

3rd member of acid chloride: propanoyl chloride (also known as propionyl chloride)

The IUPAC name of the fourth member of the  series is Butanal

The "-CHO" functional group is known as an aldehyde, and it can be found in a variety of organic compounds. Here are some examples of compounds that contain the "-CHO" functional group:

Methanal (formaldehyde): CH2O

Ethanal (acetaldehyde): C2H4O

Propanal (propionaldehyde): C3H6O

Butanal (butyraldehyde): C4H8O

Pentanal (valeraldehyde): C5H10O

Hexanal (caproaldehyde): C6H12O

Heptanal (enanthic aldehyde): C7H14O

Octanal (caprylic aldehyde): C8H16O

Nonanal (pelargonic aldehyde): C9H18O

Decanal (capric aldehyde): C10H20O

Learn more about functional group:https://brainly.com/question/14618322

#SPJ1

The solution to precipitate the barium ion, Ba²⁺, in a water sample is sodium sulfate.

The expected precipitate is BaSO4, or barium sulfate. Barium sulfate is an insoluble salt, which means that when sodium sulfate is added to the water sample, barium sulfate will form and settle out of the solution.

Sodium sulfate reacts with barium ions in the water sample to form the insoluble salt BaSO4 according to the following equation: Ba²⁺ + SO4²⁻ --> BaSO4. Since BaSO4 is insoluble in water, it will settle out of solution.

This process is known as precipitation. Precipitation occurs when a soluble compound is converted to an insoluble one.

To know more about Precipitation click on below link:

https://brainly.com/question/18109776#

#SPJ11

The molarity of the 4.46 L solution containing 9.38 mol of barium chlorate is 2.10 M.

The molarity of a solution is a measure of the concentration of a solute in the solution. It is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, we need to divide the number of moles of the solute by the volume of the solution in liters.

Given that the solution contains 9.38 mol of barium chlorate and has a volume of 4.46 L, we can calculate the molarity (M) as,

Molarity = Number of moles of solute / Volume of solution in liters

Molarity = 9.38 mol / 4.46 L

Molarity = 2.10 M

To know more about Barium Chlorate, here

brainly.com/question/15097261

#SPJ4

Answer:

1) adding a safety switch that automatically turns off the heater when it reaches a certain temperature

2) incorporating reflective material around the heating element to increase heat output.

Explanation:

chatgpt

The true statement given about the bonding electrons is option b. "The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly".

Carbon dioxide is a linear molecule that consists of two oxygen atoms and one carbon atom. The C-O bond in [tex]CO_2[/tex] is polar, which means that the electrons are shared unequally between the atoms. As oxygen is more electronegative than carbon, it attracts the electrons more strongly, and hence, the bonding electrons spend more time around the O atom than the C atom.

In other words, option b is the correct statement about the bonding electrons in carbon dioxide ([tex]CO_2[/tex]) molecule.

Thus bonding electron spends more time around the O atom as it attracts the electrons more strongly than the C atom.

Therefore correct option is b. The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly.

To learn more about bonding refer to: https://brainly.com/question/30004630

#SPJ11