which control ensures that production files cannot be accessed without specific permission? a. computer services function b. database management system c. recovery operations function d. source program library management system

Yes, that is correct. Encapsulation is the process of breaking a message or data into smaller packets or frames, adding control information such as source and destination addresses, error detection codes, and other necessary information, and transmitting the message through a transmission medium such as a wired or wireless network.

This process helps to ensure that the data is transmitted efficiently and reliably over the network.

Encapsulation is an essential process used in computer networking to transmit data over a network. When data is sent over a network, it is divided into small packets, which are then encapsulated with the necessary control information such as source and destination addresses, error detection codes, and other necessary information.

Each packet is given a sequence number so that the receiving device can reassemble the packets in the correct order. This process is essential for ensuring that the data is transmitted reliably and accurately over the network. Once the packets reach their destination, they are de-encapsulated to extract the original message or data.

You can read more about Encapsulation at https://brainly.com/question/28482558

#SPJ11

To provide multiple paths between switches, you can implement a technique called link aggregation or port aggregation, also known as EtherChannel or NIC teaming.

Link aggregation groups multiple physical links into a single logical link, providing redundancy and increased bandwidth.

There are two types of link aggregation:

To implement link aggregation, you need to ensure that the switches and the network interface cards (NICs) support the technique. You also need to configure the switches and the NICs to use the same link aggregation method. Once configured, the switches will recognize the link aggregation and automatically load balance traffic across the links.

By providing multiple paths between switches, you can ensure that if one link goes down, an alternate path is available, and the network continues to function without interruption.

To get a similar answer on Link aggregation:

https://brainly.com/question/6964275

#SPJ11

Top-down approach is to implement one method in the structure chart at a time from the top to the bottom. Thus, the correct option is B. Top-down approach.

Top-Down Approach is a programming methodology that breaks down a complicated system into manageable subcomponents or functional modules that have been designed to work together. It is a form of software design in which a framework is built that solves the primary issues, with the aim of breaking the software down into smaller pieces.

Therefore, the correct option is B. Top-down approach.

You can learn more about programming methodology at

https://brainly.com/question/15138259

#SPJ11

The cell c6 with the value 1.2546 will display as "125.5%" if it is formatted with percent style and one decimal place.

To format the cell, right-click on cell c6, then select "Format Cells" from the drop-down menu. In the "Format Cells" window, select the "Number" tab, then select "Percentage" from the list of formats. Now you can adjust the number of decimal places, by changing the value in the box next to "Decimal places". To change the value to one decimal place, set the value to "1".

Once you have set the number of decimal places, click on the "OK" button to apply the formatting. The value in cell c6 will now be displayed as "125.5%" when viewed in the worksheet.

You can learn more about formatting at: brainly.com/question/21934838

#SPJ11

Here is a program that takes its input from a file of numbers of type double and outputs the largest number found in the file and the average of the numbers in the file to a file.

while True:

   # get the filename from the user

   filename = input("Enter the filename: ")

   # open the file for reading

   try:

       with open(filename, 'r') as f:

           # read the contents of the file and split them into a list of strings

           data = f.read().split()

           # convert the strings to floats

           data = [float(x) for x in data]

           # calculate the largest number and average

           largest = max(data)

           average = sum(data) / len(data)

   except FileNotFoundError:

       print("File not found. Please try again.")

       continue

   # open the output file for writing

   with open("output.txt", 'w') as f:

       # write the largest number and average to the file

       f.write(f"Largest number: {largest}\n")

       f.write(f"Average: {average}\n")

   # ask the user if they want to repeat the operation

   repeat = input("Do you want to repeat? (y/n): ")

   if repeat.lower() != 'y':

       break

Learn more about the program here:

https://brainly.com/question/11023419

#SPJ11

The most commonly used LAN for fiber transmission links is the 850 nm multimode fiber.

This type of fiber is designed to carry multiple signals over the same link, allowing for faster data transmission and greater bandwidth. It can be used for short-distance transmission over up to a few kilometers. It is a relatively low-cost solution and requires less power than single-mode fiber. The 850 nm multimode fiber uses a relatively wide light source, which is able to spread the signal over a greater distance with less attenuation. This makes it a great choice for short-distance applications.

Additionally, it is more immune to noise than single-mode fiber and is less susceptible to changes in temperature. It is an ideal choice for fiber-optic networks that are used in LANs, such as those used for Ethernet, data centers, and storage area networks.

You can learn more about multimode fiber at: brainly.com/question/20459294

#SPJ11

To print the contents of the array 'inventory', you can call the function 'printarray' like this: printarray(inventory);

This function will loop through the array 'inventory' and print each item on a separate line. It will display the contents of the array in the same order they were entered.

To break it down further, the function 'printarray' takes an array as its argument. It then begins a loop and uses the array's length as the limit of the loop. For each iteration, the function prints out the item at the current index of the array. This process is repeated until the end of the array is reached.

In conclusion, calling the function 'printarray' with the argument 'inventory' will print out the contents of the array 'inventory'.

You can learn more about array at: brainly.com/question/13261246

#SPJ11

Based on the given scenario, it is recommended to implement Windows 10 OS. Windows 10 OS and version are recommended to be implemented. No, it is not recommended to implement more than one kind of OS because it will be difficult to manage and maintain.

The software and hardware requirements to support Windows 10 OS include Processor: 1 gigahertz (GHz) or faster processor or System on a Chip (SoC)RAM: 1 gigabyte (GB) for 32-bit or 2 GB for 64-bitHard disk space: 16 GB for 32-bit OS 20 GB for 64-bit OSGraphics card: DirectX 9 or later with WDDM 1.0 driver display: 800x600.

The decision to recommend Windows 10 OS was made based on the fact that Windows is more widely used and has better compatibility with most software applications. Also, the fact that some departments are still operating older OS versions that have negatively impacted their productivity makes it necessary to upgrade to the latest OS.

Additional information that would be required to make a well-informed decision includes the specific hardware and software requirements of the applications used by the organization and the compatibility of these applications with different OSes. This information will help to determine if any other OS can be implemented besides Windows 10 OS.

To know more about OS: https://brainly.com/question/1033563

#SPJ11

False. Custom objects can be a useful tool when used in combination with alternate solutions such as CRM extensions or the Timeline API.

They can be used to create custom data sets that can be used in your applications. With custom objects, you can create new fields to store additional data, customize data objects to meet your specific needs, and integrate with other systems. Custom objects also allow you to store and manage information more efficiently and securely. With CRM extensions, you can use custom objects to extend the functionality of your CRM, allowing you to capture and store data more efficiently.

Similarly, custom objects can be used with the Timeline API to capture and store data in a more organized fashion. In conclusion, custom objects can be beneficial when used in combination with alternate solutions such as CRM extensions and the Timeline API.

you can learn more about Custom objects at: brainly.com/question/30136580

#SPJ11

The following conditions are the result of a syn (synchronize) flood attack: Denial of service (DoS), Packet filtering, and Resource exhaustion.

A flood attack is a type of cyberattack that aims to incapacitate a network or web server by overwhelming it with a large volume of traffic. It is one of the most common types of cyberattacks, and it is commonly used to execute Denial of Service (DoS) assaults on target systems, resulting in resource exhaustion and eventual failure.

The attacker directs a large number of SYN packets to the target in an SYN flood attack. The aim of these attacks is to clog up a network or server's processing capacity by forcing it to synchronize with a high volume of requests. This effectively renders the target system unavailable, causing the user to experience resource exhaustion and eventual failure. The condition of packet filtering is also the result of a syn flood attack.

Learn more about SYN flood attacks:

https://brainly.com/question/28279445

#SPJ11

(A) checkIndexes(table, 4, 5) returns a value of true as it is within the bounds of the 2-dimensional array, data, which is declared as double[][].

The method call that returns a value of each answer are

Therefore, the method call that returns a value of true is `checkIndexes(table, 4, 5).

Learn more about boolean logic here

https://brainly.com/question/2467366

#SPJ11

The correct option for an empty singly linked chain is "the reference to the first node is null." Therefore the correct option is option B.

A singly linked list, also known as a one-way linked list, is a type of linked list. It is a group of nodes that are linked to one another in a linear order. Each node has a data component and a pointer component pointing to the next node in the sequence.

When we speak of an empty singly linked chain, it is a chain that has no nodes. Therefore, the reference to the first node is null because there are no nodes to reference. So, "the reference to the first node is null" is the correct answer among the given options for an empty singly linked chain. Therefore the correct option is option B.

For such more question on node:

https://brainly.com/question/29526707

#SPJ11

Which of the following is true about an empty singly linked chain? group of answer choices

the data value of the first node is null

the reference to the first node is null

the first next reference is null the number of items in the chain is 0

To define a function named SortVector that takes a vector of integers as a parameter and sorts it in descending order (highest to lowest), you can use the bubble sort algorithm.

Here's a step-by-step explanation and code in C++:

1. Define the SortVector function:

```cpp
void SortVector(vector& myVec) {
   int n = myVec.size();
   for (int i = 0; i < n-1; i++) {
       for (int j = 0; j < n-i-1; j++) {
           if (myVec[j] < myVec[j+1]) {
               swap(myVec[j], myVec[j+1]);
           }
       }
   }
}
```

2. Write the main program:

```cpp
#include
#include
using namespace std;

void SortVector(vector& myVec);

int main() {
   int n, num;
   cin >> n;

   vector myVec;
   for (int i = 0; i < n; i++) {
       cin >> num;
       myVec.push_back(num);
   }

   SortVector(myVec);

   for (int i = 0; i < n; i++) {
       cout << myVec[i] << ",";
   }

   return 0;
}
```

With this code, if the input is: 5​ 10​ 4​ 39​ 12​ 2​,

the output is : 39,12,10,4,2, as the function SortVector modifies the vector by sorting the elements in descending order (highest to lowest) using the bubble sort algorithm.

To know more about bubble sort:https://brainly.com/question/13161938

#SPJ11

An indicator of a false ID is c. the card can be peeled apart. A genuine ID cannot be easily peeled apart, while a fake one may consist of separate layers that can be separated.

What is an ID?
ID stands for "identification" and refers to a document or card that is used to prove a person's identity. It typically includes the person's name, photograph, date of birth, and other personal information such as an address or identification number. Common types of IDs include driver's licenses, passports, and national identity cards. IDs are often required in various situations, such as when traveling, voting, opening a bank account, or accessing certain facilities or services.


An indicator of a false ID is (c) the card can be peeled apart. This means that the card is not made of durable materials, and can be easily tampered with. A genuine ID should be made of high-quality materials that cannot be easily modified or tampered with. If the card can be peeled apart, it suggests that it may be a fake ID. The other options listed are common security features found on genuine IDs. The bar code on the backside is used for scanning and verifying the ID, raised letters on the face are difficult to reproduce and can be felt when running a finger over them, and a ghost image of the photograph is another security feature that helps prevent counterfeiting.

To know more about security visit:
https://brainly.com/question/2092464
#SPJ1

A bar code on the backside raised letters on the face, and the inability to peel the card apart are indicators of a genuine ID.

An indicator of a false ID is the bar code on the backside. The bar code is a machine-readable representation of the ID information and should be present on a valid ID. If the bar code is missing or not scannable, it may suggest a false ID. Raised letters on the face of the ID are another indicator of a genuine ID. These raised letters are difficult to replicate and can be felt by touch.

If the card can be peeled apart, it is likely a fake ID. Genuine IDs are made of durable materials and cannot be easily separated into layers. Lastly, a ghost image of the photograph is typically present on a valid ID. This is a faint secondary image that provides an extra layer of security and makes it more challenging to create a counterfeit ID.

https://brainly.com/question/31481257

The question statement refers to what guarantees a database system that enforces referential integrity, whereby, a non-null foreign key attribute always references another existing record. The correct answer is B.

Referential integrity is a feature of database systems that ensures the consistency and validity of relationships between tables. In a relational database, a foreign key is an attribute in one table that refers to the primary key of another table. The referential integrity constraint ensures that the foreign key value always corresponds to an existing primary key value in the referenced table.

Complete question:

If a Database System can enforce referential integrity, then this ensures which of the following

A) a foreign key attribute in a record always refers to another record that contains nulls.

B) a non-null foreign key attribute always refers to another existing record o

C) a foreign key attribute in a record always refers to another record that does not contain nulls

D) a record can never contain a null value for a foreign key attribute

E) a record is always referred from another record

Learn more about Database System:

https://brainly.com/question/518894

#SPJ11

In order to set up a network with DHCP for IPv6, you will need to ensure that your Windows 10 systems are set up to request IPv6 configuration information from DHCP. To do this, you can either use the Group Policy Editor or edit the registry settings.

1) To use the Group Policy Editor, navigate to Computer Configuration > Administrative Templates > Network > IPv6 Transition Technologies. Within this menu,

2) Double click on “Set Up IPv6 Using DHCP” and enable the policy.

3) To edit the registry settings, navigate to the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters and add a DWORD value “UseDHCP” with a value of 1.

4) Once these changes are made, your systems should begin requesting IPv6 configuration information from DHCP.

5) To verify that this is occurring, you can check the “DHCPv6 Client State” in the Network Connections control panel or run the “ipconfig /all” command from the command line.

6) Setting up a network with DHCP for IPv6 will allow your Windows 10 systems to obtain the TCP/IP information that they need. The Group Policy Editor or registry settings can be used to configure the systems to request this information from DHCP.

Dynamic Host Configuration Protocol (DHCP) is a client/server protocol used to automatically assign IP addresses and other network parameters to devices on the network. IPv6 uses the same DHCPv6 protocol, which is an extension of DHCP, to assign IPv6 addresses to devices.

To set up the network so that all Windows 10 systems using IPv6 get all of their TCP/IP information through DHCP, follow the steps below

1. Enable IPv6 on your network

You need to enable IPv6 on your network before you can use DHCPv6 to assign IPv6 addresses to devices. Most modern routers and switches support IPv6, so check your device's documentation for instructions on how to enable it.

2. Install DHCPv6 Server on a Windows Server

Next, you need to install DHCPv6 Server on a Windows Server that is connected to your network. DHCPv6 Server is included with Windows Server 2008 and later versions.

3. Configure DHCPv6 Server

Once you have installed DHCPv6 Server on a Windows Server, you need to configure it to assign IPv6 addresses to devices on your network. You can configure DHCPv6 Server to assign IPv6 addresses to devices using the following methods:

Stateless address autoconfiguration (SLAAC): This method allows devices to generate their own IPv6 addresses using information received from the router.

Stateful DHCPv6: This method allows DHCPv6 Server to assign IPv6 addresses and other network parameters to devices.

4. Configure Windows 10 systems to use DHCPv6

Finally, you need to configure Windows 10 systems to use DHCPv6 to obtain their TCP/IP information. To do this, follow these steps:

a) Open the Network and Sharing Center.

b) Click Change adapter settings.

c) Right-click the network adapter that you want to configure and select Properties.

d) Select Internet Protocol Version 6 (TCP/IPv6) and click Properties.

e) Select Obtain an IPv6 address automatically and Obtain DNS server address automatically.

f) Click OK to save your changes.

In conclusion, by following these steps, you can set up your network to use DHCPv6 to assign IPv6 addresses and other network parameters to devices. This will ensure that all Windows 10 systems using IPv6 get all of their TCP/IP information through DHCP.

For more such questions on DHCP

https://brainly.com/question/30188706

#SPJ11

The value in a(n) variable persists between function calls is the d. static local because a variable in C has a duration that specifies its lifetime.

A variable's duration is determined by its storage category, which is one of the following: automatic, static, or dynamic. The static storage category refers to variables whose memory is allocated before the program starts running and persists until the program ends its execution. Static variables are global in scope and remain unchanged even when a function is terminated.

The value in a static variable persists between function calls. As a result, the value stored in a static variable can be used and updated across multiple function calls. In a function's scope, a static variable is declared with the keyword "static," and its data type is defined. The syntax for declaring a static variable is as follows:

datatype functionName()

{
   static dataType staticVariableName;
   staticVariableName = value;
   //Rest of the code
}

Therefore, the correct answer is d. static local.

You can learn more about function calls at: brainly.com/question/29833806

#SPJ11

When placing new flatware in front of a guest, any unused flatware remaining from the previous course should be cleared away by the server or waiter.

This is typically done using a tray or a small plate to hold the used utensils, which should be removed from the table discreetly and without drawing attention to the guest or disrupting their dining experience.

It is important to clear away any unused flatware from the previous course to maintain a clean and organized table setting, and to avoid any confusion or discomfort for the guest. The new flatware should be placed in the appropriate position according to the next course that is being served, and any necessary adjustments to the table setting should be made accordingly.

Learn more about new flatware

https://brainly.com/question/606806

#SPJ11

For the SRAM 3-port ALE1 configuration, it is not possible to have external, physical access to any address lines above A15. This is because all the address lines of a microprocessor are used in programming the different registers, and these registers are inaccessible from outside the microprocessor.

SRAM stands for Static Random-Access Memory. It is a form of memory that can hold data indefinitely as long as there is power. It is a faster type of memory compared to Dynamic Random-Access Memory (DRAM). However, it is more expensive and has a lower capacity compared to DRAM. SRAM is used for processor caches, digital signal processors, and in other high-speed applications.

ALE stands for Address Latch Enable. It is a signal that is used in microprocessors to latch the address lines onto the address bus. The address bus is a set of wires that are used to carry the address of the memory location to be accessed. The ALE signal is used to ensure that the address lines are latched at the correct time.

You can learn more about Random-Access Memory at: brainly.com/question/30513283

#SPJ11

  The given statement "The general control area of systems development and program change does not have an impact on day-to-day transaction processing." is FALSE.

What is a transaction in computer science?

A transaction is a program or function that reads or modifies data items in a database. A transaction is a discrete unit of work that can execute multiple operations on a database. Transactions ensure that a database system remains in a consistent state regardless of concurrent user access and data modification requests. Therefore, in the day-to-day transaction processing, systems development and program change have a significant impact.

Hence, the given statement "The general control area of systems development and program change does not have an impact on day-to-day transaction processing." is FALSE. This is because the changes to the system, such as updates and modifications, can change how a transaction is processed and how data is stored. Additionally, new programs and development can introduce new features to the system which can impact how transactions are processed.

Learn more about Day-to-day transaction here:

https://brainly.com/question/14395924

#SPJ11

Constraints are normally expressed in the form of rules. The correct answer is Option D.

Constraints are typically defined as rules that restrict the values that may be entered in a field. Data types, default values, checks, and validations are examples of constraints in a database.

The types of constraints are:

Domain constraint: This specifies that a column in a database table can only contain values from a specific range.

Check constraint: This limits the values that can be placed in a table by specifying conditions that must be true for a record to be added.

Unique constraint: This ensures that no two records in the table have the same values for the specified column.

Primary key constraint: This guarantees that the value in the specified column is unique and serves as the table's primary key.

Foreign key constraint: This constraint is used when a field in one table has to correspond to the field in another table that is the primary key.

Learn more about Constraints here: https://brainly.com/question/25302150

#SPJ11

The communication method that you should use to effectively stimulate conversation with and between a group of employees who are all in their early 20s is social media.

Given that the employees in question are in their early 20s, it is likely that they are comfortable with using digital forms of communication. Therefore, e-mail and social media are the most appropriate methods of communication to stimulate conversation with and between your workers.

Handwritten notes and formal postings of policies may not be the most effective ways to reach out to your employees and engage them in conversation. Handwritten notes can be perceived as old-fashioned, and formal postings of policies may come across as rigid and bureaucratic.

On the other hand, e-mails and social media provide more opportunities for interaction and engagement. E-mails can be used to convey important information, while social media platforms can be used to facilitate group discussions and conversations among your workers.

However, it's important to note that different people may prefer other methods of communication. It's always a good idea to consider the preferences of your employees and adjust your communication strategy accordingly.

To get a similar answer on  communication:

https://brainly.com/question/22558440

#SPJ11

In response to a large-scale data breach where personal information and social security numbers of customers were exfiltrated from an organization's network, the organization should take the following actions:Immediately contain the breach and limit the damage by isolating affected systems and networks.

This includes disabling any compromised accounts and changing passwords for all users, as well as monitoring network traffic to identify any further unauthorized access or data exfiltration. Investigate the breach to determine the extent of the damage and how it occurred. This may involve working with third-party security experts to analyze network logs, conduct forensic analysis, and identify vulnerabilities that may have been exploited.Notify affected customers and regulators as required by law or best practices. This may include offering credit monitoring services or other compensation to affected individuals, as well as updating privacy policies and improving security measures to prevent future breaches.Cooperate with law enforcement and other authorities in their investigation of the breach. This may include providing evidence or testimony as needed to help identify and prosecute the responsible parties.Implement security best practices and improve network security measures to prevent future breaches. This may include updating security policies, training employees on security awareness, and implementing technical controls such as encryption, access controls, and intrusion detection systems.

Learn more about information here:

https://brainly.com/question/31059452

#SPJ11

To join two tables in a database where each ingredient may be used in multiple recipes and each recipe requires multiple ingredients, a many-to-many relationship should be used.

In a many-to-many relationship, multiple records in one table can be associated with multiple records in another table. To implement this type of relationship, a third table, often called a junction table, is used. The junction table contains foreign keys that reference the primary keys of the two related tables. In this case, one table would contain the recipe data, including the recipe name and any other relevant information. The other table would contain the ingredient data, including the ingredient name and any other relevant information.

Learn more about many-to-many: https://brainly.com/question/13437434

#SPJ11

Answer:

true

Explanation:

The given statement "If you have information literacy, you can select the right tool to find the information you need" is true Information literacy is the ability to locate, evaluate, and effectively use information from various sources.

This includes knowing which tools and resources to use to find the information needed. With information literacy, individuals can identify and select the appropriate search tools and strategies to find information that is reliable, relevant, and accurate. This includes understanding how to use search engines, databases, online catalogs, and other resources effectively. Information literacy is a critical skill in today's digital age, where vast amounts of information are readily available, and it is essential to know how to sift through this information to find what is useful and reliable.

You can learn more about  information literacy at

https://brainly.com/question/28528603

#SPJ11

The new feature in Server 2016 that provides a light-weight server geared toward use on virtual machines is called "Nano Server".

Nano Server is a minimalistic version of Windows Server 2016 that is designed specifically for running cloud-based applications and optimized for use in virtualized and containerized environments. It is a lightweight and low-maintenance option that can be used to run Hyper-V clusters, scale-out file servers, and other cloud-based workloads.

Nano Server has a smaller footprint than other versions of Windows Server 2016, with no GUI or local logon capability. This makes it more secure and easier to manage remotely. Nano Server is also designed to be updated and managed using remote management tools like PowerShell, Windows Management Instrumentation (WMI), and Desired State Configuration (DSC).

Learn more about Nano Server

https://brainly.com/question/28282755

#SPJ11

The correct answer is If my coworker is creating headings for a report, I would advise them to keep the headings short but clear, and to use a consistent format for all the headings. Using parallel construction is not as important as clarity and consistency in this case.

To ensure clarity, it is important to use headings that accurately reflect the content of the section and are easy to understand. Headings should also be brief and to the point, to avoid confusing or overwhelming the reader. In terms of format, I would recommend using a consistent heading hierarchy, such as the APA style or MLA style, where different levels of headings are formatted differently. This will help to organize the content and make it easier for the reader to navigate the report. Additionally, I would advise my coworker to consider using bullet points or numbered lists within sections to help break up long blocks of text and make the report more readable. This can also help to highlight key points and make them more memorable for the reader. By following these recommendations, my coworker can create clear and well-organized headings that effectively guide the reader through the report and make the content more accessible and engaging.

To learn more about coworker click on the link below:

brainly.com/question/30038316

#SPJ1

The static route that an IT technician would enter to create a backup route to the 172.16.1.0 network that is only used if

the primary RIP learned route fails is as follows:ip route 172.16.1.0 255.255.255.0 192.168.10.2 10.What is a static route?A static route is a route that is manually added to a router's routing table rather than one that is discovered dynamically via routing protocols. The purpose of a static route is to offer a more secure and stable way to route data through a network. It is also possible to use static routes to fine-tune the path that data takes through a network.Static routes are commonly used to connect separate networks that do not have their own routing protocol, or to offer backup connectivity if a primary route is unavailable. In the case of a failed primary route, a backup route may be used to keep network traffic flowing properly.
An IT technician would enter the following static route to create a backup route to the 172.16.1.0 network that is only used if the primary RIP learned route fails:

ip route 172.16.1.0 255.255.255.0 [next-hop IP address] [administrative distance]

Replace [next-hop IP address] with the IP address of the next-hop router and [administrative distance] with a value higher than RIP's default (120) to ensure it's used as a backup route.

Learn more about primary RIP here;

https://brainly.com/question/30902592

#SPJ11

Creating a backup route to the 172.16.1.0 network involves setting a static route with an Administrative Distance (AD) higher than 120, which is the AD used for RIP. Configure this on the router's global configuration mode.

To create a backup static route on a router, an IT professional would use a higher Administrative Distance (AD) value than the primary RIP learned route. The AD value used for RIP is 120, so the static route should have an AD greater than 120. Here is an example on how to set it up:

  Step 3: Exit the configuration mode and save the changes.

With this setup, this static route will only be used if the primary RIP learned route fails.

https://brainly.com/question/33558761

Calix was asked to protect a system from a potential attack on DNS. To do this, the locations he would need to protect are b. host table and external DNS server.

This is because host table and external DNS servers are the most vulnerable locations to be attacked. DNS is an abbreviation for the Domain Name System. It is the internet's telephone book, linking web servers with their corresponding domain names. A typical DNS server can manage a phonebook of millions of domain names and their associated IP addresses. It translates human-friendly domain names into the IP addresses that machines use to recognize one another on the internet.

A host table is a simple text file that contains the IP address and domain names of every device on the network that has a fixed IP address. When a device connects to a network, the operating system stores the IP address and the domain name in a host table. Whenever the device requires data from another device on the network, it first checks the host table for the domain name and IP address of the device with which it wishes to connect. Therefore, option B is Correct.

Know more about IP address here :

https://brainly.com/question/29575722

#SPJ11

The wireless technology that influences the spectral efficiency of 4G and 5G wireless communication services, reduces interference, and increases the channel robustness is option D:mimo-ofdm

MIMO-OFDM is a wireless communication technology that uses multiple antennas at both the transmitter and receiver ends of a communication link to improve the data rate, reliability, and spectral efficiency of wireless communications.

Therefore,  It combines the advantages of MIMO (Multiple Input Multiple Output) and OFDM (Orthogonal Frequency Division Multiplexing) technologies, allowing for the transmission of multiple data streams simultaneously over the same frequency band. This enables higher data rates and more reliable wireless communication with reduced interference and increased channel robustness.

Read more about wireless communication services here:

https://brainly.com/question/29379516

#SPJ1