The boiling point will be lower, because water boils when its vapor pressure is equal to atmospheric pressure.
What is atmospheric pressure?Atmospheric pressure is described as the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.
If you are at 8 000 m above sea level, the air pressure is lower than one atmosphere and the equilibrium between the water and air pressures will be reached before.
In conclusion, Atmospheric pressure is caused by the weight of the air molecules above.
Learn more about Atmospheric pressure at: https://brainly.com/question/19587559
#SPJ1
The boiling point of water at 8000m above sea level where air pressure is lower would be significantly lower.
How does air pressure affect boiling point ?The boiling point of water decreases as the air pressure decreases. At an altitude of 8000 meters above sea level, the air pressure is significantly lower than it is at sea level, so the boiling point of water would also be significantly lower.
At sea level, the normal boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at a standard atmospheric pressure of 101.3 kPa. As the altitude increases, the atmospheric pressure decreases, so the boiling point of water decreases as well.
Find out more on boiling point of water at https://brainly.com/question/18188829
#SPJ1
How can you deduce if a compound is optically active or not ?
Answer:
look for evidence that the molecules are chiral.
Explanation:
The instrument with which optically active compounds are studied is a polarimeter, shown in the figure below. Imagine a horizontal line that passes through the zero of a coordinate system.
Investigating Jessie's Claim
Identifying the Other Reactant
If the container was not empty when Jessie added the chlorine gas, then what could have been inside it? Below is an image
showing the reaction inside the container. There is also a table that lists some of the substances that Dr. Yung keeps in her lab.
The group of atoms that repeat to form each substance, as well as some of the properties of each substance, are included in the
table.
Procedure
1. Use the tokens and the information in the table to determine what the other reactant inside the container could have been.
2. Once you have identified the other reactant, answer the questions below.
Velma and Shaggy are debating on which cleaning solution to use when cleaning the Mystery Machine based on how strong the solution may be.
Velma recommends using a 0.25 M NaOH solution with a pH of 13.40.
Shaggy recommends using a 0.025 M NaOH solution with a pH of 12.50.
Who is recommending the stronger cleaning solution, Velma or Shaggy? Why is their recommendation correct?
Answer:
velma is recommending the stronger soloution
Explanation:
because firstly velmas solution is more concentrated and the pH level of her solution is more Alkaline than shaggies solution
mention three properties of alloys
Air currents transfer energy by the method of heat transfer called
Answer:
convection
Explanation:
How many geometric isomers are possible for the complex [CrF3Br3]3– ?
To solve this we must be knowing each and every concept related to isomer. Therefore, two geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.
What is isomer?
An isomer is a chemical substance that has the same number and kinds of atoms like another chemical species that differs from it in terms of attributes due to the way the atoms are organized.
Stereoisomerism includes geometric isomerism. It is sometimes referred to as E-Z isomerism or cis-trans isomerism. Geometric isomerism is caused by cyclic compounds' constrained rotation around carbon-carbon double or single bonds. The complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻ has two geometric isomers, one is facial and other is meridional.
Therefore, two geometric isomers are possible for the complex [CrF[tex]_3[/tex]Br[tex]_3[/tex]]₃⁻.
To learn more about isomer, here:
https://brainly.com/question/28188244
#SPJ1
What sources of error may have contributed to the percent yield not being 100 percent? Think about things that may have led to inaccurate measurements or where mass of the product could have been lost if this experiment was conducted in a physical laboratory
The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.
What is product?Product is a tangible or intangible good that is produced for sale on the market.
1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.
To learn more about product
https://brainly.com/question/29171025
#SPJ4
Jerry designed a coat that he thinks could keep people dry during a thunderstorm. He created a prototype that looks just like his drawing. What should Jerry do next?
Answer:
The next step is prototype testing
Explanation:
The stages of the design process are;
1) Situation analysis
Paper based research is conducted on the situation to obtain the situation parameters
2) Brief writing
With the situation analysis developed above, the brief of the current situation is put down on paper
3) Problem research
The problem is researched and experimented on with the development of a paper based proof of the possible concept
4) Specification writing
The specifications of the problem are outlined
5) List the possible solutions
The possible solutions are brainstormed and listed
6) Preferred solution selection
The preferred solution is selected based on the constraints in the situation
7) Create working drawing/plan
The working design drawing of the selected solution or concept is completed and evaluated for applicability
8) Building of a prototype
The design is converted into a prototype which is a model of the actual solution
9) Testing of the prototype
The prototype is tested for functionality, for ability to work in the intended situation and/or in the intended system
10) Report writing
A report is made on the outcome of the tests for review before production
Therefore, after the prototype is created, stage 8, the next step is the testing of the prototype stage 9.
Why the properties of elements are repeated after 2 8 18 and 32 elements?
The properties of the elements are repeated after 2 8 18 and 32 elements because these are the maximum number of the electrons that the four shells contains.
The electronic configuration of the elements in the periodic table are repeated because the maximum number of the electrons that the four shells can have are 2 8 18 and 32. the name of the four shells are K , L, M, N. The electronic configuration of the elements are repeated and due to this the properties of the elements are repeated.
Thus, the properties of the elements are increases because the electronic configuration are repeated in the periodic table.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
A certain volume of gas at 298kelvin is heated such that its Volume and pressure are now 4 times their original value. what is the new temperature
Answer: The new temperature is 4768 K.
Explanation:
Given: [tex]T_{1}[/tex] = 298 K, [tex]V_{1}[/tex] = V, [tex]P_{1}[/tex] = P
[tex]T_{2}[/tex] = ?, [tex]V_{2}[/tex] = 4V, [tex]P_{2}[/tex] = 4P
Using the combined gas law formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{P \times V}{298 K} = \frac{4P \times 4V}{T_{2}}\\T_{2} = 4768 K[/tex]
Thus, we can conclude that the new temperature is 4768 K.
The limiting reactant, O2, forms 2.7 mol AI2O3. What mass of AI2O3 forms, knowing the molar mass of AI2O3 is 102 g/mol?
The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.
What is mole ?The term mole (M) is defined as the amount of substance in a system which include as many elementary entities as there are atoms present in it. It is denoted by the symbol “mol”. The word mole is coming from the Latin word moles, which means “a mass”.
Molar Mass of Al₂O₃ = 101.96 g/mol
2.7 mole Al₂O₃ 101.96 g
------------------------ x -------------------
X 1 mole
= 280 g Al₂O₃
Thus, The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
Draw the structure of the major organic product(s) of the following reaction.
excess Br2
excess OH
The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.
The major organic product is 2-bromobutane.
Structure:
CH3 CH2 CH2 CH2 Br
| | |
CH3 CH2 Br
1) The reaction begins with bromine reacting with the 2-methylpropane molecule to form the intermediate 2-bromo-2-methylpropane.
2) The intermediate then reacts with hydroxide ions to form the final product, 2-bromobutane.
3) The final product is a saturated hydrocarbon with a bromine atom attached to the second carbon atom.
The major organic product of this reaction is 2-bromobutane, a saturated hydrocarbon with a bromine atom attached to the second carbon atom.
learn more about hydrocarbon here
https://brainly.com/question/17578846
#SPJ4
What is the importance of CO2 and O2 in water?
The importance of the carbon dioxide, CO₂ and the oxygen O₂ in the water is they both are important for the aquatic animals and for the aquatic plant.
The CO₂ and O₂ are both important for the aquatic animals and also for the aquatic plants. the concentration of the oxygen in to the water is important for the aquatic animals that the dissolved oxygen for the respiration. the carbon dioxide will be more soluble in water than the oxygen in the water.
The carbon dioxide forms the carbonic acid in the water. the carbon dioxide is useful for the aquatic plants for the growth.
To learn more about CO₂ and O₂ here
https://brainly.com/question/13381473
#SPJ4
Elements whose properties are between those of metals and solid nonmetals are called:
metals
neutrons
metalloids
nonmetals
Answer:
mettaliods
Explanation:
It has the both property of metal and non metal so it is called mettaliod.
Answer:
metalloids
Explanation:
they are solid at roomtempreture and alloys with metals.
examples boron,silicon,arsenic,tellurium
naproxen (Aleve): 73.03%C, 6.13%H, and 20.84%O Express your answer as a chemical formula?
If the molecular weight is 230.26 g/mol carbon = 73.03% = 230.26*73.03/100 = 168.15/12 = 14 Carbons Hydrogen = 6.13% = 230.26*6.13/100 = 14/1 = 14 Hydrogens Oxigen = 20.84% = 230.26*20.84/100 = 47.98/16 = 3 Oxygens Hence the empirical formula is C14H14O3
What is a weight example?The International System for Units (SI) defines the newton as the unit of force, which is used to measure weight. For instance, a kilogram of matter weighs around 9.8 newtons on Earth's surface and around each as much on Moon.
How are weights determined?Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object. The mass of a bird with a mass of 15 g changes with the strength of the gravity influence acting on it, and would differ significantly if it were measured, for instance, on the Moon rather than on Earth.
To know more about weight visit:
https://brainly.com/question/6853752
#SPJ4
Determine the liters of water formed when 6.97 L hydrogen react with an excess of oxygen. Please explain this so I can have a reference for when I don other questions.
2 H2(g) + 102 (g) → 2 H20 (l)
Answer:
it turns into icecream
Puffy Chalmers was in his room, admiring his Mr. Drought mask, when his mother, Cookie Chalmers, barged into his room. She was so tired of the mask, she ripped it up and threw the pieces into a metal trash can. Then she pulled a bottle of acid out of her purse, and poured it on the mask pieces causing them to bubble, smoke, and change color. Did she change the mask physically or chemically? Explain your answer using evidence and your knowledge of physical and chemical changes. Help
She changed the mask chemically. Burning of the substance with acid is a chemical change.
A new substance with new qualities is created during burning, which is a chemical alteration that cannot be undone. A chemical change is the transformation of one substance into another, the emergence of new compounds with distinct properties, or any combination of these. It happens when two substances mix to create a new material. Baking soda and vinegar producing carbon dioxide, iron rusting, and wood burning are a few examples of chemical changes. The metabolization of food and the production of amylase from the combining of sugar and saliva are only two examples of the many chemical processes that the body produces.
Learn more about chemical change here:-
https://brainly.com/question/23693316
#SPJ4
Please help.. which kind of rock requires heat and pressure to form?
-Clastic rock
-Igneous rock
-metamorphic rock
-sedimentary rock
the answer I think is the metamorphic rock
Answer:
metamorphic
Explanation:
sedimentary rocks under heat and pressure form metamoephoc rocks
HCl(aq)+NaOH(aq)→NaCl(aq)+H2O(l)
A student had two dilute, colorless solutions, HCl(aq) and NaOH(aq), which were at the same temperature. The student combined the solutions, and the reaction represented above occurred. Which of the following results would be evidence that a chemical reaction took place?
'The temperature of the reaction mixture increases' would be evidence that a chemical reaction took place.
What is a dilute solution?
A dilute solution is a solution that contains fewer solute particles than a more concentrated solution. Dilute solutions are generally less concentrated than more concentrated solutions and are often made by adding more solvent to the solution.
When a chemical reaction takes place, energy is released in the form of heat. This increase in temperature is basically known as an exothermic reaction. An increase in temperature is a sign that a chemical reaction has taken place, as the reaction mixture is absorbing the energy released from the reaction.
To know more about a dilute solution,
https://brainly.com/question/27097060
#SPJ4
Explain the energy transformation occurring in the image and how the law of conservation of energy is demonstrated here.
Molecular iodine, i2(g), dissociates into iodine atoms at 625 k with a first-order rate constant of 0. 271 s−1. Part a part complete what is the half-life for this reaction?
After solving the equation: The half-life for this reaction is 0.693/0.271 = 2.56 s.
What is reaction?Reaction is the response of a system to an external or internal stimulus. It is the way a person or object behaves in response to a change in their environment. Reactions can be physical, chemical, or psychological. Physical reactions involve changes in the body, such as muscle tension, sweating, or heart rate.
The half-life for this reaction is the time it takes for the concentration of molecular iodine to decrease by a factor of 2, or for half of the original amount of molecular iodine to react. This can be calculated using the equation:
T1/2 = 0.693/k
where k is the first-order rate constant.
Therefore, the half-life for this reaction is 0.693/0.271 = 2.56 s.
To learn more about reaction
https://brainly.com/question/25769000
#SPJ4
How many moles are there in 2.87x10^23 molecules C3H8?
Answer:
0,5 moles
Explanation:
N = L × n
n = N ÷ L
n = 2,87 × 10²³ ÷ 6,02 × 10²³
n = 2,87 ÷ 6,02
n = 0,47 moles or 0,5 moles
if 87 grams of K2SO4 (molar mass 174 grams) is dissolved in enough water to make 250 milliliters of solution, what are the concentrations of the potassium and the sulfate ions ?
[K+ ] [SO4^2]
A. 0.020 M 0.020 M
B. 1.0 M 2.0 M
C. 2.0 M 1.0 M
D. 2.0 M 2.0 M
E. 4.0 M 2.0 M
If 87 grams of K₂SO₄ is dissolved in enough water to make 250 milliliters of solution, the concentrations of the potassium [K⁺] is 4 M and the sulfate ions [SO₄²⁻] is 2 M.
The molar mass of the K₂SO₄ = 174 g/mol
The mass of the K₂SO₄ = 87 g
the moles of the K₂SO₄ = 87 / 174
= 0.50 mol
moles of K⁺ = 0.50 × 2
= 1 mol
moles of SO₄²⁻ = 0.50 × 1
= 0.50
The concentration of [K⁺] = 1 / 0.250 = 4 M
The concentration of [SO₄²⁻] = 0.50 / 0.250 = 2 M
To learn more about concentration here
https://brainly.com/question/19579038
#SPJ4
Problem that can be caued by both the complete and incomplete
combution of methane in a ga fire
Oxidation of methane to soot:
CH4(g)+O2(g)⟶C(s)+2H2O(g)
Among the hydrocarbons is methane, CH4(g). Only the elements carbon (C) and hydrogen (H) are present in the complex. When methane burns with too much oxygen, it produces water vapor and carbon dioxide gas CO2(g) (g). Complete combustion is defined as combustion with extra oxygen.
Methane can be partially oxidized into a variety of compounds when it is burned inefficiently, including CO, methanol, formic acid, formaldehyde, and higher hydrocarbons.
Carbon monoxide is an extremely toxic gas. It is invisible and odorless. Without anybody being aware of it, malfunctioning gas fireplaces or boilers can poison the air in a room by emitting carbon monoxide.
To know more about combustion click here
https://brainly.com/question/14335621
#SPJ4
The complete question is
Problems that can be caused by both the complete and incomplete
combustion of methane in a gas fire.
What volume of 0.145 MNaOH is required to reach the equivalence point in the titration of 45.0 mL of 0.105 M HNO3
The volume of 0.145 M NaOH is required to reach the equivalence point in the titration of 45.0 mL of 0.105 M HNO₃ is 32.58 mL.
Given that :
the molarity of the HNO₃ , M1 = 0.105 M
the volume of the HNO₃ , V1 = 45 mL
the molarity of the NaOH , M2 = 0.145 M
the volume the NaOH , V2 = ?
by using the equation given below , we get:
M1 V1 = M2 V2
0.105 × 45 = 0.145 × V2
V2 = 4.725 / 0.145
V2 = 32.58 mL
Thus volume of the NaOH is 32.58 mL.
To learn more about volume here
https://brainly.com/question/13144728
#SPJ4
1. Ito ay binubuo ng apat na parte/bahag, isa na rito ang pinakamahalaga ang Lobo ng Usapan.
B. Tabloid
C. Komiks
A. Pahayagan
D. Aklat
Use atomic masses to demonstrate that the balance equation for the formation of iron(III) chloride obeys the law of conservation of mass. Fe + Cl2 → FeCl3
Using the law of the conservation of mass, the reactions can be shown to obey the law.
What is the law of conservation of mass?We need to know what the law of the conservation of mass says so that we can be able to know how we can be able to apply the law in the proper perspective. We have to know that the law says that total mass of the system would remain constant. The implication of this is that the mass before the reaction would be the same as the mass after the reaction. The mass of the substance must be able to add up in the system that is under study as we have one here.
Mass of the iron = 56 g
Mass of the chlorine = 35.5 g
Balanced reaction equation;
[tex]2Fe + 3Cl_{2} ---- > 2FeCl_{3}[/tex]
This is the formation of the iron III chloride
Total mass on the right hand side = 2(56) + 6(35.5) = 325 g
Total mass on the left hand side = 2[56 + 3(35.5)] = 325 g
Learn more about conservation of mass:https://brainly.com/question/13383562
#SPJ1
dental cement, Zn3(PO4)2
Give only the names of the elements alphabetically, separating them with commas.
Zinc, phosphorus and oxygen are elements contained in dental cement (Zn₃(PO₄)).
Dental cements have a wide range of dental and orthodontic applications. Common uses include temporary tooth restoration, lining cavities to protect the pulp, sedation or isolation, and cementation of fixed prosthetic devices.
A cement-retained bridge is simply a dental device that is permanently fixed in the mouth to restore the mouse's function and aesthetics and to prevent many of the consequences of tooth loss that affect the immediate aftermath of losing natural teeth.
Learn more about prosthetic devices visit:
brainly.com/question/30158376
#SPJ4
What is the total number of moles contained in 115 grams
of C₂H5OH?
A. 1.00
B. 1.50
C. 2.50
D. 3.00
The total number of moles contained in 115 grams of C₂H5OH is 2.50 moles .
What is the term "mole"?The term "mole" refers to the quantity of a substance that has the same amount of subatomic particles (ions, molecules, or atoms) as there are carbon atoms.
Atomic weight of carbon(C)= 12 gm
Atomic weight of Hydrogen (H)=1 gm
Atomic weight of oxygen (o)=16 gm
∴Molecula weight of C2H5OH =(12×2 + 1×6 + 16×1) gm
24 + 6 + 16 gm = 46 gm
∴ 46 gm of C2H5OH contains 1 mole
1 gm of C2H5OH contain = 1/46 moles
115 gm of C2H5OH contains = 115×1/46 moles
⇒2.5 moles
To know more about moles visit:
brainly.com/question/26416088
#SPJ1
Consider the energy diagram below.
Which line indicates a higher reaction rate?
A because it has a lower activation energy.
B because it has a lower activation energy.
A because it’s Grxn is much lower
B because it’s Grxn is much lower