Answer:
salt and hydrogen gas
Explanation:
acid + metal = salt + hydrogen
Answer:
hope this helps
Explanation:
hydrogen gas
An acid will react with a metal to form a salt and hydrogen gas. The general word equation for the reaction between an acid and a metal is as follows: acid + metal → salt + hydrogen.
NAME AN ISOMER OF:
CH2CHCH2CH3
Petroleum is a fossil fuel containing many different carbon compounds. If the carbon atoms in petroleum have been in the ground for 100 million years, what fraction of the initial 14C atoms is still there
Thus, Option (C) Glucose has a maximum of 72 C-atoms per gram. The components of fossil fuels are decaying plants and animals.
These fuels may be burned to provide energy and can be found in the crust of the Earth. An example of a fossil fuel is coal, as well as oil and natural gas. Due to the hydrocarbons and other carbon-based compounds they contain, fossil fuels are valuable as energy sources. Any of a class of organic molecules made solely of carbon and hydrogen are known as hydrocarbons. The hydrogen atoms adhere to the carbon atoms, which serve as the "skeleton" or framework. Because they were generated from the petrified, buried remains of plants and animals that once lived millions of years ago, coal, crude oil, and natural gas are all referred to as fossil fuels.
The complete question is- Petroleum is a fossil fuel containing many different carbon compounds. If the carbon atoms in petroleum have been in the ground for 875 million years, what fraction of the initial 14C atoms is still there?
Learn more about carbon here-
https://brainly.com/question/22530423
#SPJ4
At room temperature I2(s) is a molecular solid. Which of the following provides a characteristic of I2(s) with a correct explanation ?
(A) It has a high melting point because it has (B) It is hard because it forms a three-dimensional covalent network
(C)It is not a good conductor of electricity because its valence electrons are localize in bonding and nonbonding pairs. (D) It is very soluble in water because its molecules are polar.
At room temperature I₂(s) is a molecular solid. the correct explanation is : (C)It is not a good conductor of electricity because its valence electrons are localize in bonding and nonbonding pairs.
The Iodine , I₂ is the example of the molecular solid. the iodine is the good conductor of the electricity due to the valence electrons that are localized in the bonding pairs and the non bonding pairs. the iodine is the element in the periodic table with the atomic number 53. the iodine is the non metallic solid at the room temperature.
The iodine exists as the diatomic form. the each iodine molecules present as the two iodine as I₂ . this is the reason it is called as molecular solid.
To learn more about I₂ here
https://brainly.com/question/14094969
#SPJ4
Calculate the percentage composition (by mass) of oxygen in K2SO4.
36.72 %
18.35 %
9.18 %
23.66 %
76.34 %
Answer:
it's option no A as described in the image
Consider the combustion of propane:
C3H8 +502 3CO2 + 4H₂O
- →
Which of the following unit factors below is correct? (Select all that may apply)
A. There are 5 oxygen molecules reacting for every six oxygen atoms produced in CO2.
B. There are 5 oxygen atoms reacting for every 3 CO₂ molecules produced.
C. There are 10 oxygen atoms reacting for every four water molecules produced.
D. There are 10 oxygen atoms reacting for every six oxygen atoms produced in CO2.
Four water molecules are created for every ten oxygen atoms that are reacting.
Propane:A three carbon alkane, propane has the chemical formula C3H8. At room temperature and pressure, it is a gas, but it can be compressed into a liquid for transportation.
What is the primary use of propane?Its primary applications include home and water heating, food preparation and storage, clothing drying, and the powering of industrial and farm machinery. The production of plastics and other chemicals in the chemical sector also uses propane as a raw ingredient.
What are propane's three drawbacks?Cons of propane heating
Compared to oil heating, propane produces fewer BTUs per gallon.Equipment that burns propane is frequently more expensive to buy than heating systems that use heating oil.To use the apparatus properly, care must be taken because propane is flammable in air.To know more about alkane :
https://brainly.com/question/3648919
#SPJ1
Please show work image below includes the questions.
Answer:
Calcium nitride (Ca3N2)
148.25 g/mol is the molar mass
If you see an uncharacterized container that has a white crystalline residue on the outside, what should you do
NO links, please! I will be reporting and reporting all of the other links you answer
Answer:
This should be correct "The biggest advantage of sexual reproduction versus asexual reproduction is genetic diversity. When a single organism reproduces asexually it produces an exact copy of the parent organism."
Explanation:
sorry that I'm late but brainliest ....... please...................., maybe............... ?????
Darwin observed how farmers and breeders produced many kinds of farm animals and plants. These plants and animals had traits that were desired by the farmers and breeders. He also noticed how the study of similar body structures and vestigial organs could add to the evidence of evolution. After performing several breeding experiments, he came to certain conclusions and formulated some theories. His theory of evolution and natural selection is the most accepted one.
What is the reason behind the acceptance of Darwin's theory?
Responses
A It is based on the practical example of Lamarck’s theoryIt is based on the practical example of Lamarck’s theory
B It is supported by its harmonizing with other views.It is supported by its harmonizing with other views.
C It is based on the ideas of earlier hypothesis and laws.It is based on the ideas of earlier hypothesis and laws.
D It is supported by practical evidence and examples.
The reason behind the acceptance of Darwin's theory is D It is supported by practical evidence and examples.
What is the theory of evolution proposed by Charles Darwin?The theory of evolution proposed by Charles Darwin is a well sustained model that explains how animals change in order to adapt to an ever-changing enviroment, which is supported by scientific evidence and observations.
Therefore, with this data, we can see that the theory of evolution proposed by Charles Darwin is well sustained by evidence obtained from experimentation and also observations of the natural world.
Learn more about the theory of evolution here:
https://brainly.com/question/19297177
#SPJ1
Which component is missing from the process of photosynthesis? carbon dioxide water _________ → glucose oxygen sunlight sugar plants carbon
The component missing from the process of photosynthesis is carbon dioxide. Carbon dioxide is an essential component of photosynthesis as it is used by plants to create glucose, which is the primary energy source for plants.
What is Carbon dioxide?Carbon dioxide (CO2) is a colorless, odorless gas that is produced when carbon-containing compounds are burned. It is one of the most abundant trace gases that make up the Earth’s atmosphere. Carbon dioxide is important in the Earth’s natural cycle of life as plants use it to produce food through photosynthesis, while animals and humans exhale it as a waste product. In the atmosphere, carbon dioxide acts as a greenhouse gas and helps regulate the Earth’s temperature.
Carbon dioxide is taken in by the leaves of the plant and then combined with water and energy from sunlight to form glucose. Without carbon dioxide, photosynthesis would not be possible.
To learn more about Carbon dioxide
https://brainly.com/question/25385913
#SPJ4
Answer: The Correct Answer is A. Sunlight
Carbon Dioxide + Water + Sunlight → Glucose + Oxygen
Explanation: I took the test and got it right.
Have a Great Day.
Please help!
Given the following reaction,
3H2SO4(aq)+Ca3(PO4)2(s)⟶3CaSO4(s)+2H3PO4(aq)
If 1.25x10^5 kg of H2S)4 react, how many kilograms of H3PO4 are produced?
Thank you!
Answer:
8.3 × 10⁴kg
Explanation:
Solution in the diagram
Draw plausible electron dot structures for the following substances. Each substance contains only single covalent bonds. A. I2 B. OF2 C.H2S D.NI3.
The plausible electron dot structures of I₂, OF₂, H₂S, NI₃ substances are attached below.
How is an electron dot structured?Lewis dot structures, also known as electron dot structures, are diagrams that show how atoms in a molecule are chemically bonded to one another. They also show how many lone pairs there are in total among all the atoms that make up the molecule.
An electron configuration writing guide. The shell number (n) comes first in the symbols used to represent the electron configuration, followed by the type of orbital and, finally, a superscript that represents the number of electrons in the orbital. Examples include As you can see from the periodic table, oxygen has 8 electrons.
To know more about covalent bonds visit:
https://brainly.com/question/10777799
#SPJ4
HELP FOR MY FINAL PLEASE PLEASE
For average speed, we divide the total distance covered by the total time taken.
After doing that, you will see that Jane has the lowest average speed.
Gas is collected over water at 25 °C. The pressure in the container was 0.13 atm. Using a vapor pressure chart, what is the pressure of the dry gas?
Answer:
[tex]p_{gas}=0.0987atm[/tex]
Explanation:
Hello there!
In this case, according to this problem about partial pressures, we first use the Dalton's law in order to realize how the vapor pressure of water and the partial pressure of the gas contribute to the total pressure:
[tex]P_T=p_{H_2O}+p_{gas}[/tex]
Thus, since the vapor pressure of water at 25 °C is 0.0313 atm, the partial pressure of the gas turns out to be:
[tex]p_{gas}=P_T-p_{H_2O}\\\\p_{gas}=0.13atm-0.0313atm\\\\p_{gas}=0.0987atm[/tex]
Regards!
Which state of matter consists of particles that cannot be compressed and form a definite shape?
A. Gas
B. Liquid
C. Plasma
D. Solid
The solid does not consist of that particle which can not be compressed and have a definite shape.
What is solid?One of matter's four basic states is solid. A solid's molecules are tightly packed and carry the minimum amount of kinetic energy. A solid's structural stiffness and resistance to a force applied to its surface define it. Although they are locked in fixed locations, they do vibrate. Solids have a defined structure and volume and cannot flow since the particles do not move. Solids are difficult to crush because the particles are often so close together.
What is particles?A particle is a small, localized object to which numerous physical or chemical qualities, like volume, density, or mass, can be assigned.
To know more about solid click here.
https://brainly.com/question/9402776.
#SPJ2
Which of the following statements is true?
A. The change in freezing point of a solution is directly proportional to the number of
solute particles in the solution and dependent on the type of particle.
B. The change in freezing point of a solution is directly proportional to the number of
solute particles in the solution and independent of the type of particle.
C. The change in freezing point of a solution is inversely proportional to the number
of solute particles in the solution and dependent on the type of particle.
D. The change in freezing point of a solution is inversely proportional to the number
of solute particles in the solution and independent of the type of particle.
Answer:
The effect of adding a solute to a solvent has the opposite effect on the freezing point of a solution as it does on the boiling point. A solution will have a lower freezing point than a pure solvent. The freezing point is the temperature at which the liquid changes to a solid.
Explanation:
Hope this helps :3
The change in freezing point of a solution is inversely proportional to the number of solute particles in the solution and dependent on the type of particle,is the the TRUE statement.
What is meant by freezing point?Freezing point, temperature at which a liquid becomes a solid. As with the melting point, increased pressure usually raises the freezing point. The freezing point is lower than the melting point in the case of mixtures and for certain organic compounds such as fats.The change in freezing point of a solution is inversely proportional to the number of solute particles in the solution and dependent on the type of particle,is the the TRUE statement.
To learn more about Freezing point refer:https://brainly.com/question/11977850
#SPJ2
(HURRY) Watch the Candy Shop video. In this reaction, a student determined that the mass of the carbon product was less than the mass of the sulfuric acid and sugar that were combined. How would you account for this loss of mass? Use evidence and scientific reasoning to support your answer
The loss of mass can be accounted for by the energy released during the reaction. When the sulfuric acid and sugar mix, the reaction produces carbon dioxide gas, which has a much lower mass than the original reactants. This is because the reaction releases energy as heat, which causes the molecules to break apart and form the gaseous carbon dioxide.
What is molecule?Molecule is the smallest unit of a substance that has all the properties of that substance and is made up of two or more atoms bonded together. Molecules can either be made of elements or a combination of elements and compounds. Molecules can be described as the building blocks of matter, made up of atoms. Atoms are made up of protons, neutrons, and electrons, and the arrangement of these particles determine the type of molecule.
To learn more about molecule
https://brainly.com/question/1078183
#SPJ4
What is the correct Lewis structure for Group 5A element, Arsenic?
.As. :AS
As
:
• As.
...
A.
B.
C.
D.
A.
A
B.
B
C.
с
D. D
Answer:
As
Explanation:
because of ionic bond
SI unit is 10 times smaller than the next smallest unit. Ture or false?
Answer:
the answer is true
please mark brainlist
6. Which subatomic particle has no charge?
O proton
O electron
O neutron
Answer:
O Neutron
Explanation:
Answer:
the anwser is
electronHOPE IT HELPEDHow popular is hydroelectric power?
Hydroelectric power is one of the oldest and most widely used renewable sources of energy.
Globally we see that hydropower is by far the largest modern renewable source. Every country's top priority is to generate hydroelectric power so they have to rely less on nuclear and coal power plants.
Hydroelectric power is generated by using the elevation difference, created by a dam or diversion-like structure of water flowing in on one side and out, far below, on the other side.
If we talk about some countries, Hydropower currently generates 31.5% of total U.S. renewable electricity generation.
If you need to learn more about hydroelectric power, click here
https://brainly.com/question/15228003?referrer=searchResults
#SPJ4
The enthalpy of solution of KBr in water is about 198 kJ/mol. Nevertheless, he solubility of KBr in water is relatively high. Why does the solution process occur even though it is endothermic?
The process of dissolution of KBr in water occurs because the final solution has a lower energy state than the two components separately.
What do you mean by endothermic?
Endothermic reactions are chemical reactions that absorb energy from their surroundings in order to proceed. This energy is usually in the form of heat and is absorbed from the surroundings in order to drive the reaction forward.
Even though the dissolution process is endothermic, it occurs because the enthalpy of solution is less than the sum of the enthalpies of the two components separately. The enthalpy of solution is the energy required to break the strong ionic bonds between the KBr molecules, allowing them to dissolve into the solution. The energy released from the formation of new hydrogen bonds between the KBr molecules and the water molecules is greater than the energy needed to break the ionic bonds, resulting in a net release of energy. This release of energy causes the overall process to be exothermic, even though the dissolution of KBr into water is endothermic.
To know more about endothermic,
https://brainly.com/question/6506846
#SPJ4
Part A
Which of the following best describes the side chain of arginine at a pH of 11?
nonpolar
uncharged but polar
charged and polar
aprotic
hydrophobic
Charged and polar is incorrect. My textbook says the pKa of the sidechain is 12.48. Can you please explain what the correct answer is?
At a pH of 11, the side chain of arginine would be positively charged (NH3+) and polar.
This is because the pKa of the guanidine group (NH2) in the side chain of arginine is 12.48, which means that at a pH greater than 12.48, the guanidine group will be protonated and carry a positive charge. Since the nitrogen atom in the guanidine group is also surrounded by hydrogen atoms, the side chain is polar.
Key points:
The side chain of arginine is a guanidine group (NH2).The pKa of the guanidine group is 12.48, which means that at a pH greater than 12.48, the guanidine group will be protonated (NH3+).When protonated, the guanidine group carries a positive charge.The nitrogen atom in the guanidine group is surrounded by hydrogen atoms, which makes the side chain polar in nature.Learn more about arginine here:
https://brainly.com/question/28368975
#SPJ4
if a reaction takes place using all oxygen available and leaving hydrogen available:
Answer:
If a reaction takes place using all oxygen available and leaving hydrogen available, then oxygen is the limiting reactant.
Explanation:
The reaction used up all the oxygen and left over some hydrogen, so oxygen is the liting reactant.
[OH-] is 5.62x10-9 56.2x10-9 O 1.78 x10-6 o 17.8 X10-9
Answer: What are you in, fudging grade two-thousand???
Slow moving gas molecules means
YALL HELP MEEE
Answer:
The gas has been cooled down
Explanation:
molecules move slower and slower and have less and less kinetic energy if you cool it down but it also has something to do with how big the particles are, how heavy they are, and their temperature. If the particles are heavier and bigger they will move slower.
And if their temperature is colder that will also cause them to move slower. Hope this helps!!
Determine 4.86×10^24 atoms Au to grams
The mass of 4.86 × 10²⁴ Au atoms is equal to 1589.6 g.
What is Avogadro's number?Avogadro’s number can be used to express the number of entities such as molecules, atoms, ions, electrons, or protons in one mole of any substance.
The value of Avogadro’s constant is equal to 6.022 × 10²³ per mole.
Given, the number of atoms of the Au = 4.86 × 10²⁴
The atomic mass of the Au = 197 g/mol
So 6.022 × 10²³ atoms of Au have mass = 197 g
Then 4.86 × 10²⁴ Au atoms will have mass = 1589.6 g
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ1
at what temperature will the mass of 198g of carbon dioxide gas at 2 atmospheric pressure take up to a volume of 35l? (gas constant= 0.0821L atm.
Answer:
The temperature will be 189.70 K.
Explanation:
Ideal gases are a simplification of real gases that is done to study them more easily. It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P*V = n*R*T
where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.
In this case:
P= 2 atmV= 35 Ln= 198 g* [tex]\frac{1 mole}{44 g}[/tex] = 4.5 moles (where 44 g/mole is the molar mass of carbon dioxide)R= 0.082 [tex]\frac{atm*L}{mol*K}[/tex]T= ?Replacing:
2 atm* 35 L= 4.5 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] * T
Solving:
[tex]T=\frac{2 atm* 35 L}{4.5 moles* 0.082\frac{atm*L}{mol*K} }[/tex]
T= 189.70 K
The temperature will be 189.70 K.
If you need 18.9 grams of HCl for a reaction, and you have a 1.5 M solution of HCl, how many mL of this solution should you use
If we need 18.9 grams of HCl for a reaction, and we have a 1.5 M solution of HCl, the mL of this solution should we use is 345.3 mL.
Given that :
mass of the HCl = 18.9 grams.
molar mass of the HCl = 36.45 g/mol
moles of the HCl = mass / molar mass
= 18.9 / 36.45
= 0.518 mol
the molarity of the HCl = 1.5 M
The molarity is given as:
molarity = moles / volumes
volume in L = moles / molarity
= 0.518 / 1.5
= 0.3453 L
= 345.3 mL
Thus, the volume is 345.3 mL.
To learn more about molarity here
https://brainly.com/question/2817451
#SPJ4
what happens to the speed of a sound wave from an underwater animal as the sound passes into the air above?
A. It stays the same
B. It falls to zero
C. It decreases
D. It increases