Answer:
Sublimation, the dry ice changes to a gas, solid to gas is sublimation
which of the following will affect the vapor pressure of a pure molecular substance? select all that apply. multiple select question. the external pressure the structure of the substance the strength of the intermolecular forces the temperature
As temperature increases, vapor pressure of substance also increases due to an increase in kinetic energy of the molecules. The correct answers are options: 1, 2, 3, 4.
As temperature increases, vapor pressure of a substance also increases due to an increase in kinetic energy of molecules Substances with stronger intermolecular forces will have lower vapor pressure because it requires more energy to break bonds between molecules and transition into gas phase. An increase in external pressure will decrease vapor pressure. Molecular size and shape of a substance can affect intermolecular forces and therefore its vapor pressure. For example, larger molecules tend to have stronger intermolecular forces, which result in lower vapor pressures. Options are 1, 2, 3, 4 correct .
To know more about vapor pressures, here
brainly.com/question/26127294
#SPJ4
--The complete Question is, which of the following will affect the vapor pressure of a pure molecular substance?
select all that apply.
1. the external pressure
2. the structure of the substance
3. the strength of the intermolecular forces
4. the temperature
5. the weather conditions--
Ramsay is testing the thermal conductivity of four different materials (W, X, Y, and Z) at room temperature. He cuts each material to the same length and touches one end to a 100°C iron cylinder. After 30 seconds, he measures the temperature of the opposite end of each material. His results are shown below. Which material is most likely a metal?
The material W is most likely a metal. The higher the thermal conductivity of a material, the faster heat will be transferred through it.
What is thermal conductivity?Thermal conductivity is the ability of a material to conduct heat, i.e., how quickly heat can be transferred through a material. It is a measure of the rate at which heat flows through a material when a temperature difference exists between two points in the material.
Materials with high thermal conductivity are good conductors of heat, meaning they allow heat to flow easily through them. Examples of materials with high thermal conductivity include metals like copper, aluminum, and silver. Materials with low thermal conductivity are poor conductors of heat, meaning they do not allow heat to flow easily through them. Examples of materials with low thermal conductivity include insulators like wood, plastic, and air.
To determine which material is most likely a metal, we need to look for the material with the highest thermal conductivity.
Material Temperature after 30 seconds
W 50°C
X 40°C
Y 30°C
Z 20°C
From the table, we can see that material W had the highest temperature after 30 seconds, followed by material X, Y, and Z. This indicates that material W is the best conductor of heat, making it the most likely to be a metal.
To know more about thermal conductivity, visit:
https://brainly.com/question/7643131
#SPJ1
question every atom in the universe emits energy in the form of a nucleus. responses true true false
The given statement "every atom in the universe emits energy in the form of a nucleus" is False.
In the universe, every atom does not emit energy in the form of a nucleus. It is not true in the case of every atom in the universe. But it is true that every atom in the universe emits energy.
According to the Bohr model of the atom, an electron orbiting an atomic nucleus emits radiation when it changes its energy level. The radiation emitted by the electron is in the form of a photon of electromagnetic energy. This is a spontaneous process and it is called spontaneous emission. It can be said that every atom in the universe emits energy.
Therefore, it is false that every atom in the universe emits energy in the form of a nucleus.
To know more about the atom, refer here:
https://brainly.com/question/1566330#
#SPJ4
Complete orbital diagrams (boxes with arrows in them) to represent the electron configuration of valence electrons of carbon before and after sp hybridization Drag the appropriate labels to their respective targets. Labels can be used once, more than once, or not at all. Reset Help Before hybridization 2s 2p After hybridization sp 2p
The electron configuration of valence electrons of carbon before and after sp hybridization are shown below:Before hybridization: 2s2 2p2After hybridization: sp2 2p2The orbital diagram before sp hybridization shows two electrons in the 2s orbital and two electrons in each of the 2p orbitals. After hybridization, the 2s orbital mixes with one of the 2p
orbitals to form two sp hybrid orbitals. These sp hybrid orbitals are oriented at 180° to each other, which allows maximum overlap with two 2p orbitals of the carbon atom. The remaining 2p orbital remains unhybridized and
unchanged. Therefore, the hybridized orbitals contain only one electron each and the unhybridized 2p orbital has two electrons.The boxes with arrows in the orbital diagram represent the orbitals and their electrons. The label "2s" is
dragged to the box representing the 2s orbital before hybridization. Similarly, the labels "2p" and "sp" are dragged to the boxes representing the unhybridized and hybridized orbitals after hybridization, respectively. The label "2p" is also dragged to the unhybridized 2p orbital after hybridization.
For more similar questions on hybridization
brainly.com/question/30902614
#SPJ11
Calculating volume (formula) and density of regular shaped objects
Please help I need to complete this assignment fast :( I’m not sure on how to do it, If you don’t know how to do it don’t answer pls
The density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.
How to solve
PART A: Density of a regular shaped object:
Trial 1: mass of the object = 162.20 g
volume of object = L x H x W = 4.90 cm x 3.90 cm x 2.90 cm
= 55.419 cm^3
Therefore density of the object = mass / volume = 162.20 g / 55.419 cm^3
= 2.9268 g/cm^3
trial 2: mass of the object = 162.18 g
volume of object = L x H x W = 4.89 cm x 3.90 cm x 2.88 cm
= 54.92448 cm^3
Therefore density of the object = mass / volume = 162.18 g / 54.92448 cm^3
= 2.9528 g/cm^3
Average = [ 2.9268 + 2.9528 ] /2 = 5.8796 / 2 = 2.9398 g / cm^3 = 1.94 g / cm^3.
The accepted value is 2.73 g / cm^3 for aluminium. The difference is 0.21
% error = 100 x difference / accepted value = 100 x 0.21/2.73 = 7.7 %.
---------------------------------------------------------------------------------------------------
Part B: Determination of density of an irregular shaped object:
Trial 1:
mass of the marble chips = 10.25 g
Volume of the marble chip = final volume of water - initial volume of water
= 53.8 - 50 = 3.8 mL
Therefore density of marble chip = mass / volume = 10.25 g / 3.8 mL
= 2.697 g / mL
Trial 2:
mass of the marble chips = 10.32 g
Volume of the marble chip = final volume of water - initial volume of water
= 53.9 - 50.1 = 3.8 mL
Therefore density of marble chip = mass / volume = 10.32 g / 3.8 mL
= 2.716 g / mL
Average = [2.697 + 2.716] / 2 = 5.413 / 2 = 2.71 g / mL
The accepted density of marble chip = 2.70 g / mL The difference is 0.01
% error = 100 x difference / accepted value = 100 x 0.01/ 2.70 = 0.37 %.
--------------------------------------------------------------------------------------------------------------------
PART C: Determination of density of saline solution:
Trial 1:
Volume of the saline solution = 10 mL
mass of the saline solution = finall mass - initial mass
= 35.66 - 25.36 = 10.3 g
Density of the saline solution = mass / volume = 10.3 g / 10 mL = 1.03 g / mL
Trial 2:
Volume of the saline solution = 10 mL
mass of the saline solution = finall mass - initial mass
= 35.55 - 25.35 = 10.2 g
Density of the saline solution = mass / volume = 10.2 g / 10 mL = 1.02 g / mL
Average =[ 1.03 + 1.02 ] / 2 = 1.025 g / mL
Thus the unknown sample B has the density of 1.025 g / mL.
The composition of salt in this solution can be determined by interpolation.
salt % = 0 + 5 x [ 1.025-0.998] / [1.036 - 0.998] ( using the values given in the table )
= 0 + 5 x 0.027 / 0.038
= 3.55 %.
Thus the density of the unknown sample is 1.025 g / mL and its salt composition is 3.55 %.
Read more about density here:
https://brainly.com/question/6838128
#SPJ1
why can we assume that the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7?
The thiocyanate ion (SCN-) concentration equals the complex ion concentration in beakers 2-7 because the reaction that took place was a 1:1 stoichiometric reaction. This means that the moles of SCN- reactant is equal to the moles of complex product formed.
The thiocyanate ion concentration in beakers 2-7 can be assumed to equal the complex ion concentration because the reaction between the iron(III) ion and thiocyanate ion is practically irreversible. According to the given information below:
2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)
The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion.
Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.Let's use this information to provide an HTML-formatted answer below:
In beakers 2-7, the thiocyanate ion concentration is assumed to equal the complex ion concentration because the reaction between iron(III) ions and thiocyanate ions is practically irreversible.
According to the given information below:
2 Fe³⁺(aq) + 3 SCN⁻(aq) → Fe(SCN)₂⁺(aq)
The red-brown Fe(SCN)₂⁺ complex is formed in beakers 2-7 due to the reaction of iron(III) ions and thiocyanate ions. Since the reaction is irreversible and occurs entirely to the right, the concentration of the Fe(SCN)₂⁺ complex equals the concentration of the SCN⁻ ion. Therefore, the thiocyanate ion concentration equals the complex ion concentration in beakers 2-7.
For more such questions on stoichiometric reaction , Visit:
https://brainly.com/question/29007372
#SPJ11
a reaction has a rate constant of 0.0117/s at 400.0 k and 0.689/s at 450.0 k. determine the activation barrier for the reaction in kj/mol. do not include units in your answer.
The activation barrier for the reaction in kJ/mol is ≈ 78.
The activation barrier for the reaction in kJ/mol can be calculated by using the Arrhenius equation.
The Arrhenius equation is represented by the following expression:
[tex]k = A^(^-^E^a^/^R^T^)[/tex]
Where k = rate constant
A = frequency factor (pre-exponential factor)
Ea = activation energy
R = gas constant
T = temperature
In the equation, the exponential term represents the probability of reactant molecules possessing enough energy to react. The activation energy (Ea) is the minimum energy required to initiate the reaction. The frequency factor represents the probability of a successful collision between reactant molecules. It is assumed that the frequency factor is constant within a given temperature range. The rate constant is a measure of the reaction rate.The activation barrier for the reaction in kJ/mol is given by the following expression:
Ea = (R)(ln(k2/k1))/(1/T1 - 1/T2)
Where k1 and k2 are the rate constants at temperatures T1 and T2, respectively.
R is the gas constant.
Here, k1 = 0.0117/s, k2 = 0.689/s, T1 = 400.0 K, T2 = 450.0 K and R = 8.314 J/K mol
Converting the units of R to kJ/K mol,
R = 8.314/1000 = 0.008314 kJ/K mol
Therefore, the activation barrier for the reaction in kJ/mol is given by the expression:
Ea = (0.008314 kJ/K mol) × ln (0.689/0.0117) / ((1/400.0 K) - (1/450.0 K)) ≈ 78 kJ/mol
Learn more about rate constant: https://brainly.com/question/26724488
#SPJ11
a student does not transfer all of the unknown acid into the flask before titrating with an naoh solution that was correctly standardized. how does this mistake affect his recorded results?
This mistake would lead to inaccurate results because the unknown acid wasn't completely transferred into the flask. As a result, the recorded results won’t reflect the true acid concentration of the unknown acid.
In order to obtain accurate results, all of the unknown acid must be completely transferred into the flask before titrating with a NaOH solution that was correctly standardized.
When this step is not taken, the amount of acid titrated will not be an accurate representation of the unknown acid's concentration. This leads to a lower than expected titration result, which in turn leads to inaccurate results.
It is important to remember to transfer all of the unknown acid into the flask before titrating with a standardized NaOH solution. Doing so ensures that the titration results will accurately reflect the concentration of the unknown acid.
To know more about titration click on below link:
https://brainly.com/question/2728613#
#SPJ11
ethyl benzene is treated with (i) br2 and febr3 and (ii) br2 and light or heat separately. do you think the products will be same? justify your answer.
No, the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] and [tex]FeBr_3[/tex] in the presence of light or heat will be different from the products obtained from the reaction of ethylbenzene with [tex]Br_2[/tex] / light or heat.
In the first reaction, [tex]Br_2[/tex] and [tex]FeBr_3[/tex] act as a source of electrophilic bromine, which attacks the aromatic ring of ethylbenzene, leading to the formation of 1-bromoethylbenzene. The mechanism for this reaction is an electrophilic aromatic substitution, where the electrophilic [tex]Br^+[/tex] ion is generated in situ by the reaction of [tex]Br_2[/tex] with [tex]FeBr_3[/tex].
In the second reaction, [tex]Br_2[/tex] acts as a source of free radical bromine, which undergoes a free radical substitution reaction with ethylbenzene, leading to the formation of 1,2-dibromoethylbenzene. This reaction proceeds through a free radical mechanism, where the [tex]Br_2[/tex] molecule is split into two free radicals by the action of light or heat.
Therefore, the products obtained from the two reactions will be different. In the first reaction, 1-bromoethylbenzene will be formed, while in the second reaction, 1,2-dibromoethylbenzene will be formed.
To learn more about Electrophilic aromatic substitution refer to the link: https://brainly.com/question/14908357
#SPJ11
write down a reaction scheme for polymerization of styrene initiated by thermolysis of azobisisobutyronitrile, including both combination and disproportionation as possible modes of termination.
The reaction scheme is as follows:
Styrene (monomer) + Azobisisobutyronitrile (initiator) → Radical polymers + Nitrile groups
Radical polymers then undergo combination or disproportionation as the possible modes of termination:
Combination:
Radical polymers + Radical polymers → Polystyrene (end product)
Disproportionation:
Radical polymers → Polystyrene + Styrene (monomer)
Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.
During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.
These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,
where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.
Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.
This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.
The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.
to know more about styrene refer here:
https://brainly.com/question/14546335#
#SPJ11
the decay rate for a radioactive isotope is 6.2 percent per year. find the half-life of the isotope. round to the nearest tenth of a year.
The half-life of the isotope is 11.2 years.
The half-life of a radioactive isotope is the time it takes for half of the atoms in a sample to undergo radioactive decay. For a radioactive isotope with a decay rate of 6.2 percent per year, the half-life can be calculated as follows:
Half-life = ln(2) / (decay rate) = ln(2) / 0.062 = 11.2 years (rounded to the nearest tenth)
To understand this calculation in further detail, it is helpful to consider the concept of radioactive decay in terms of probability. After one half-life has elapsed, there is a 50 percent chance that an atom will have decayed, and a 50 percent chance that it will remain undecayed. After two half-lives have elapsed, there is a 75 percent chance that an atom will have decayed, and a 25 percent chance that it will remain undecayed.
This concept can be applied to the equation above, as the probability of decay during a single time interval is equal to the decay rate multiplied by the length of the time interval. By solving this equation, the half-life of a given radioactive isotope can be determined.
Learn more about half-life here: https://brainly.com/question/1160651.
#SPJ11
aqueous carbonic acid is obtained by the reaction of carbon dioxide gas and liquid water . write a balanced chemical equation for this reaction.
The balanced chemical equation for the reaction between carbon dioxide gas and liquid water to produce aqueous carbonic acid is given below.
[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]
Here, the forward reaction is the dissolution of carbon dioxide in water, and the reverse reaction is the release of carbon dioxide from carbonic acid.
Carbonic acid is a weak acid that forms when carbon dioxide reacts with water. It can be shown that the reaction between carbon dioxide and water is a reversible reaction, which means that the carbonic acid can also dissociate into carbon dioxide and water.
To write a balanced chemical equation, we follow these steps:
Write the chemical formulae of the reactants and products involved in the reaction.Write the unbalanced chemical equation by placing the reactants on the left-hand side of the arrow and the products on the right-hand side of the arrow.Balance the equation by adjusting the coefficients of the reactants and products such that the number of atoms of each element is equal on both sides of the equation.Using the above steps we get the following balanced chemical equation for the reaction of carbon dioxide and liquid water.
[tex]CO_2(g) + H_2O(l)[/tex] ⇌ [tex]H_2CO_3(aq)[/tex]
To learn more about balanced chemical equations refer - https://brainly.com/question/14427845
#SPJ11
5.how many electrons are exchanged in 2a? which species is oxidized and which is reduced?
In a 2A redox reaction, there are 4 electrons exchanged. The species that loses electrons is the oxidized species, and the species that gains electrons is the reduced species.
Explanation: In the given reaction, Fe is oxidized and Cr is reduced. There are six electrons exchanged in 2a.How many electrons are exchanged in 2a?In the given redox reaction,Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq)The given reaction can be split into half reactions:Fe2+ (aq) → Fe3+ (aq) + e- (Oxidation)Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) (Reduction)The reaction Fe2+(aq) + Cr2O72-(aq) → Fe3+(aq) + Cr3+(aq) involves the exchange of six electrons in 2a.Therefore, there are six electrons exchanged in 2a.Which species is oxidized and which is reduced?In the given reaction, Fe is oxidized and Cr is reduced.The oxidation half-reaction Fe2+ (aq) → Fe3+ (aq) + e- has Fe on both the left and right sides of the equation. As a result, the oxidation state of iron has gone from +2 to +3. Therefore, iron has lost electrons and has been oxidized.The reduction half-reaction Cr2O72- (aq) + 14H+(aq) + 6e- → 2Cr3+(aq) + 7H2O(l) involves the gain of electrons by chromium. As a result, the oxidation state of chromium has gone from +6 to +3. Therefore, chromium has gained electrons and has been reduced.In the given reaction, Fe is oxidized and Cr is reduced.
For more such questions on redox
https://brainly.com/question/23863329
#SPJ11
an unknown compound is analyzed and found to contain 0.1935 g of carbon, 0.0325 g of hydrogen, and 0.2043 g of fluorine.the molar mass of the compound is 240.23 g/mol. what quantity in moles of carbon are present in the compound?
The quantity of carbon present in moles is 3.36 x 10^23 moles.
The compound analyzed contains 0.1935 g of carbon, 0.0325 g of hydrogen, and 0.2043 g of fluorine.
The molar mass of the compound is 240.23 g/mol.
1. First, calculate the molecular mass of the compound by multiplying the mass of each element by its molar mass.
2. Divide the mass of carbon by the molecular mass of the compound.
3. Multiply the result by Avogadro's number (6.022 x 10^23).
Molecular mass = 0.1935 g x 12.011 g/mol (Carbon) + 0.0325 g x 1.008 g/mol (Hydrogen) + 0.2043 g x 18.998 g/mol (Fluorine) = 240.23 g/mol.
Moles of Carbon = 0.1935 g / 240.23 g/mol x 6.022 x 10^23 = 3.36 x 10^23 moles.
Therefore, the quantity of carbon present in moles is 3.36 x 10^23 moles.
to know more about carbon refer here:
https://brainly.com/question/22530423#
#SPJ11
suppose 0.850 l of 0.400 m h2so4 is mixed with 0.800 l of 0.250 m koh . what concentration of sulfuric acid remains after neutralization?
The concentration of sulfuric acid that remains after neutralization is 0.056 M.
To find out what concentration of sulfuric acid remains after neutralization, you will need to use the balanced equation for the reaction:
H2SO4 + 2KOH → K2SO4 + 2H2O
First, you will need to determine the moles of each reactant in the solution.
Moles can be determined using the formula:
moles = concentration x volume
In this case:
moles of H2SO4 = 0.850 L x 0.400 M = 0.34 mol
moles of KOH = 0.800 L x 0.250 M = 0.2 mol
Since the reaction is a 1:2 ratio, you will need to determine which reactant is limiting the reaction.
To do this, compare the mole ratios of the reactants:
0.34 mol H2SO4 : 0.2 mol KOH = 1.7 : 1
Since the ratio of H2SO4 to KOH is greater than 1:2, KOH is the limiting reactant. Therefore, all of the KOH is used up in the reaction, leaving some H2SO4 unreacted.
To find the amount of H2SO4 remaining, you will need to use the mole ratio of H2SO4 to KOH.
Since 2 moles of KOH react with 1 mole of H2SO4, you can use the mole ratio:
0.2 mol KOH x (1 mol H2SO4 / 2 mol KOH) = 0.1 mol H2SO4 remaining
Finally, you can determine the concentration of the H2SO4 remaining:
concentration = moles / volume
concentration = 0.1 mol / (0.850 L + 0.800 L)
concentration = 0.056 M
Therefore, the concentration of sulfuric acid that remains after neutralization is 0.056 M.
For more such questions on concentration, click on:
https://brainly.com/question/28564792
#SPJ11
Write a statement to explain which characteristics of an atom determine the VSPER structure of an atom
The VSEPR model explains that each atom in a molecule with a central atom will achieve a geometry of the molecule which minimizes the repulsion between electrons of the molecule in the valence shell of that atom.
VSEPR Model can be used to predict the structure of any molecule with a central metal atom present in it. In the polyatomic molecules which is the molecules made up of three or more atoms and one of the constituent atoms is determined as the central atom to which all other atoms belonging to the molecule are linked together.
VSEPR theory explains five main shapes of simple molecules consisting the central atom. Those five structure basically are linear, trigonal planar, tetrahedral, trigonal bipyramidal, and octahedral geometry. Using the VSEPR theory, we predict that the electron bond pairs and lone pairs on the center atom will help us to predict the shape of a central atom of a molecule. Using this theory the shape of a molecule is determined by the location of the nuclei and its electrons of the molecule.
To learn more about VSEPR Model
https://brainly.com/question/14992767
#SPJ4
write the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen
The balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
This equation represents the reaction of nitrogen molecules, N2, with hydrogen molecules, H2, to form ammonia molecules, NH3. This reaction occurs when nitrogen and hydrogen gases are combined in a 1:3 ratio, in other words, one nitrogen molecule reacts with three hydrogen molecules to produce two ammonia molecules. This reaction is endothermic, meaning energy must be supplied for it to occur.
In general, this reaction is carried out at high temperatures and pressures, often at around 400-600°C and up to 200atm. A catalyst is usually also used, usually iron, to speed up the reaction. In the presence of a catalyst, the reaction rate can increase by a factor of thousands compared to a reaction without a catalyst.
Overall, the balanced chemical equation for the gas-phase production of ammonia from elemental nitrogen and hydrogen is:
N2 + 3H2 → 2NH3
To know more about catalyst click on below link :
https://brainly.com/question/24430084#
#SPJ11
citric acid, which is present in citrus fruits, is a triprotic acid. calculate the ph and the citrate ion concentration for a 0.05 m solution of citric acid.
The pH and the citrate ion concentration for a 0.05 M solution of citric acid which is a tricrotic acid and is present in citrus fruits are to be calculated. The formula of citric acid is C6H8O7.
It's three hydrogen atoms (H) have three different pKa values because of the differences in the proton-donating properties, which will be used to calculate the citrate ion concentration. The given formula of Citric acid is C6H8O7There are three acidic hydrogens in citric acid.
The acid dissociation constant, Ka, for citric acid is given as follows: Ka1 = 7.4 × 10−4Ka2 = 1.7 × 10−5Ka3 = 4.0 × 10−7Step 1: Writing the equation for the first dissociationKa1 = [H+][C6H7O7–] / [C6H8O7]where [H+] is hydrogen ion concentration, [C6H7O7–] is citrate ion concentration, and [C6H8O7] is citric acid concentration. Citrate ion concentration = C6H7O7–Citrate ion concentration = (0.05 − [H+C6H7O7−])/2= (0.05 − 3.7 × 10−5) / 2= 0.0248The concentration of the citrate ion is 0.0248.Step 6: Computing the pH from the hydrogen ion concentration pH = −log10[H+]pH = −log10(3.7 × 10−5)= 4.43The pH of a 0.05 M solution of citric acid is 4.43.
Read more about concentration :
https://brainly.com/question/17206790
#SPJ11
what is the correct structure for 5-hydroxy-2-phenyl-3-hexanone? group of answer choices ii iii v iv i
The structure of 5-hydroxy-2-phenyl-3-hexanone is as follows:
The structure of 5-hydroxy-2-phenyl-3-hexanone is made up of a hexanone backbone, which is a six-carbon chain with a ketone functional group attached to the second carbon atom. The carbonyl group on the hexanone backbone has a phenyl group and a hydroxy group, which is a hydroxyl group connected to the fifth carbon atom of the hexanone backbone, attached to it.
The prefix 5-hydroxy-2-phenyl-3-hexanone indicates that the hydroxyl group is attached to the fifth carbon atom of the hexanone backbone, while the phenyl group is attached to the second carbon atom of the hexanone backbone.
The structural formula of 5-hydroxy-2-phenyl-3-hexanone is as follows:
In summary, the correct structure for 5-hydroxy-2-phenyl-3-hexanone is a hexanone backbone with a ketone functional group on the second carbon atom, a phenyl group attached to the second carbon atom, and a hydroxyl group attached to the fifth carbon atom. The structural formula of 5-hydroxy-2-phenyl-3-hexanone is given above.
To know more about Hexanone backbone refer here:
https://brainly.com/question/30156644#
#SPJ11
None of the molecules featured in this lab disobeyed the octet rule (aside from hydrogen), but two common types of exceptions exist: provide an example of a molecule for each type of exception and explain how the atoms in these molecules are able to deviate from the octet rule. BE DETAILED!
Answer:
The octet rule is a guideline that suggests that atoms tend to combine in a way that allows each atom to have eight electrons in its outermost energy level (except for hydrogen, which is stable with two electrons). However, there are some molecules that do not obey the octet rule. Here are two common types of exceptions and examples of molecules that fall into each category:
Incomplete Octet: In this type of exception, the atoms in the molecule do not have a complete octet of valence electrons. Examples of molecules that have incomplete octets include beryllium chloride (BeCl2) and boron trifluoride (BF3).
In beryllium chloride, beryllium has only four valence electrons, while chlorine has seven. When the two atoms combine, beryllium shares its electrons with two chlorine atoms, but it still has only four electrons around it, which is fewer than the octet rule suggests. In boron trifluoride, boron has only three valence electrons, while fluorine has seven. When the two atoms combine, boron shares its electrons with three fluorine atoms, but it still has only six electrons around it, which is also fewer than the octet rule suggests.
Expanded Octet: In this type of exception, the atoms in the molecule have more than eight valence electrons. Examples of molecules that have expanded octets include sulfur hexafluoride (SF6) and phosphorus pentachloride (PCl5).
In sulfur hexafluoride, sulfur has six valence electrons, while each of the six fluorine atoms has seven valence electrons. When the atoms combine, sulfur shares its electrons with all six fluorine atoms, resulting in a total of 12 electrons around the sulfur atom, which is more than the octet rule suggests. In phosphorus pentachloride, phosphorus has five valence electrons, while each of the five chlorine atoms has seven valence electrons. When the atoms combine, phosphorus shares its electrons with all five chlorine atoms, resulting in a total of 10 electrons around the phosphorus atom, which is also more than the octet rule suggests.
In both cases, the atoms in these molecules are able to deviate from the octet rule due to the availability of empty d orbitals in the central atom that can accommodate additional electrons beyond the octet. Additionally, the size and electronegativity of the atoms involved in the bonding also play a role in determining whether the molecule will obey the octet rule or not.
5. The particles are freely moving in all directions.
They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.
What does the term "equilibrium" in chemistry mean?When the amount of forward reaction speed equal a rate of backward reaction, chemical equilibrium has occurred. In other words, neither the reactant nor product concentrations have changed significantly.
What is a good example of chemical equilibrium?
reactions where the total number of molecules as in reactants and products is equal. O2 (g) Plus N2 (g) 2NO, for instance (g) reactions in which there are more molecules in the reactants than in the products as a whole. Cl2 (g) Plus CO (g) COCl2, for instance (g)
They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.
To know more about equilibrium visit:
brainly.com/question/30694482
#SPJ9
question is - In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. why?
suppose you have only 1.9 g of sulfur for an experiment and you must do three trials using 0.030 mol of s each time. do you have enough sulfur
Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.
Convert the mass of sulfur given to moles.
1.9 g / 32 g/mol = 0.09 mol
The moles by the number of trials you need to do:
0.09 mol x 3 trials = 0.27 mol
The moles back to grams to make sure you have enough sulfur:
0.27 mol x 32 g/mol = 8.64 g
Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.
to know more about sulfur refer here:
https://brainly.com/question/1478186#
#SPJ11
research a common household chemical, a cosmetic compound, a medical drug, or something else that is commonly known and find out what its chemical name is.
The chemical name of water is hydrogen oxide.
Water is a compound with the chemical name hydrogen oxide (H2O).
It is a colorless, odorless, and tasteless liquid that is essential for most forms of life on Earth.
Water is a chemical molecule; therefore, its many forms have different names depending on their individual constituents. According to the nomenclature established by the IUPAC, water may alternatively be referred to as dihydrogen monoxide, dihydrogen oxide, hydrogen hydroxide, or hydric acid.
Being the primary component of Earth's hydrosphere and the fluids of all known forms of life, water (chemical formula H 2 O) is an inorganic, clear, tasteless, odorless, and almost colorless chemical substance (in which it acts as a solvent). None of the known forms of life could survive without it, despite the fact that it offers neither dietary energy nor organic micronutrients.
Water is made up of two hydrogen atoms and one oxygen atom, with the formula H2O.
To know more about the water chemically https://brainly.com/question/28885148
#SPJ11
if 7.66 g of cuno3 is dissolved in water to make a 0.140 m solution, what is the volume of the solution in milliliters?
The volume of the solution in milliliters is 547.13 mL.
How to calculate the volume of the solution in milliliters?
The molarity of the solution is given by;
Molarity = Number of moles of solute / Volume of solution in liters
Using the above formula, we can calculate the volume of the solution as;
Volume of solution in liters = Number of moles of solute / Molarity
Number of moles of CuNO3 can be determined as follows:
Number of moles = Given mass of the substance / Molar mass of the substance
= 7.66 g / (Cu: 63.55 g/mol + N: 14.01 g/mol + 3O: 3 x 16 g/mol)
= 0.05 mol
Substituting the values of molarity and number of moles of CuNO3 in the formula of volume of solution, we get:
Volume of solution in liters = Number of moles of solute / Molarity
= 0.05 mol / 0.140 M = 0.357 L
Converting the volume in liters to milliliters;
Volume in milliliters = Volume in liters × 1000
= 0.357 L × 1000= 357 mL
Thus, the volume of the solution in milliliters is 357 mL.
Learn more about volume of the solution here:
https://brainly.com/question/14710169#
#SPJ11
ca 2hcl --> cacl2 h how many hydrogen atoms must be present in the product in order for the equation to be balanced?
The equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Therefore 2 hydrogen atoms must be present in the product in order for the equation to be balanced.
The chemical equation Ca + 2HCl -> CaCl2 + H2 represents the reaction between calcium (Ca) and hydrochloric acid (HCl) to produce calcium chloride (CaCl2) and hydrogen gas (H2).
To balance this equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have:
One calcium (Ca) atom on the left side and one calcium (Ca) atom on the right side, so this is already balanced.Two hydrogen (H) atoms on the left side and two chloride (Cl) atoms on the right side, so we need two hydrogen (H) atoms on the right side to balance the equation.Therefore, the equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Thus 2 hydrogen atoms must be present in the product in order for the equation to be balanced.
To learn more about hydrogen; https://brainly.com/question/24433860
#SPJ11
when 12.0 g of an unknown, non-volatile, non-electrolyte, x was dissolved in 100. g of benzene, the vapor pressure of the solvent decreased from 100 torr to 91.4 torr at 299 k. calculate the molar mass of the solute, x.
The molar mass of the solute x is 85.32 g/mol.
Let's use Raoult's law to solve the problem.The mass of the unknown, non-volatile, non-electrolyte solute = 12.0 g
Mass of the solvent = 100 g
The vapor pressure of the solvent before adding the solute = 100 torr
The vapor pressure of the solvent after adding the solute = 91.4 torr
Temperature = 299 K
Raoult's law can be written as:
P₂ = X₂ * P₁
Where:
P₁ = the vapor pressure of the pure solvent
P₂ = the vapor pressure of the solution
X₂ = the mole fraction of the solute
Solving for
X₂;X₂ = P₂/P₁ = 91.4/100
X₂ = 0.914
Calculate the moles of benzene;
n = 100g / 78.11 g/mol = 1.28 moles
X₂ = moles of solute / (moles of solute + moles of benzene)
Substituting the value of X₂ and moles of benzene;
n = 0.1406 moles
Now we need to calculate the moles of the solute;
Mass of solute = 12.0 g
Now, we will use the following formula to calculate the molar mass of the solute;
Molar mass = Mass of solute / Moles of solute
Molar mass = 12.0 g / 0.1406 moles
Molar mass of the solute is 85.32 g/mol.
Learn more about molar mass at https://brainly.com/question/837939
#SPJ11
why must a cell keep a similar concentration of dissolved substances with the fluid surrounding them?
A cell must keep a similar concentration of dissolved substances with the fluid surrounding them because it helps in maintaining homeostasis.
Homeostasis is the ability of the body to regulate its internal environment in order to maintain a stable, constant condition. For example, the body regulates temperature, blood sugar levels, pH levels, and other factors to maintain a stable internal environment.
When there is an imbalance in the concentration of dissolved substances between the cell and its surrounding fluid, the cell is at risk of losing or gaining too much water. This can cause the cell to swell or shrink, which can interfere with its normal functions.
To maintain homeostasis, the cell needs to regulate the movement of substances across its membrane in response to changes in the concentration of dissolved substances in the surrounding fluid. By doing so, the cell can maintain a stable internal environment and function properly.
For more question on homeostasis click on
https://brainly.com/question/13127022
#SPJ11
explain why the intramolecular product is the major product and explain the regioselectivity of the product.
Intramolecular products are preferred over intermolecular products in certain reactions because they are usually more stable and have lower activation energy.
The following are the main reasons why the intramolecular product is the major product:
The intramolecular reaction has a lower activation energy than the intermolecular reaction. As a result, the reaction is more exothermic and occurs more rapidly. The entropy of the system decreases when the intramolecular product is formed, which is energetically favorable. The intramolecular product may be more stable due to hydrogen bonding or a favorable conformational change in the molecule.Regioselectivity is a term used to describe a reaction's ability to form a specific constitutional isomer. In other words, it refers to the preference of a reaction for certain regions of the same compound. Regioselectivity is typically determined by the reaction's mechanism and the steric or electronic effects of the reactants.
In a reaction where a molecule undergoes multiple changes, for example, intramolecular reactions, regioselectivity refers to the selectivity of one or more of these changes.
Learn more about Regioselectivity at https://brainly.com/question/29410845
#SPJ11
A student is making a solution of NaCl in water. If the student uses 6.24 grams of NaCl and enough water to make 6.62 liters of solution, what is the molarity of the student's salt solution?
Answer:
0.0161 M
Explanation:
To find the molarity of the NaCl solution, we need to use the formula:
Molarity (M) = moles of solute / liters of solution
First, we need to calculate the number of moles of NaCl in the solution. We can do this by dividing the mass of NaCl by its molar mass. The molar mass of NaCl is 58.44 g/mol.
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of NaCl = 6.24 g / 58.44 g/mol
moles of NaCl = 0.1066 mol
Now we can use the formula for molarity:
Molarity (M) = moles of solute / liters of solution
Molarity (M) = 0.1066 mol / 6.62 L
Molarity (M) = 0.0161 M
Therefore, the molarity of the student's NaCl solution is 0.0161 M.
dentify which compounds will be UV active. A UV active compound will fluoresce when exposed to a UV lamp. Upon irradiation with UV light, a UV active compound will absorb the energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are part of the UV range. The UV active compounds are: CH2=CH2 CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-CH=CH, CH, =CH-CH=CH
UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-
CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.
The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.
To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.
For more similar questions on topic dissociate
brainly.com/question/15321204
#SPJ11