what is the resistance of the 0.800 mm -diameter, 4.70 cm -long lead from a mechanical pencil? studysmarter

The value of the mutual force between them is -3.0 x 10^-3 N.

The mutual force between two point charges can be calculated using Coulomb's law, which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The equation for Coulomb's law is F = k * (q1 * q2) / r^2, where F is the force, k is Coulomb's constant, q1 and q2 are the charges, and r is the distance between the charges.

Plugging in the given values, we get:

F = (9.0 x 10^9 N*m^2/C^2) * [(4.0 x 10^-6 C) * (-8.0 x 10^-6 C)] / (2.4 x 10^-2 m)^2

Simplifying the expression, we get:

F = -3.0 x 10^-3 N

Note that the negative sign indicates that the force is attractive, since the charges have opposite signs.

To know more about charges, here

brainly.com/question/17101884

#SPJ4

Tuesday will require more effort from Ratan since the dry surface will make it difficult to overcome the force of friction between the box and the surface through the same distance.

The smoothness or roughness of the surfaces affects frictional force. Force decreases with a smooth surface or increases with a rough surface, respectively. Friction is significantly lower on smooth and wet surfaces compared to dry or rough ones.

Because of the increase in surface roughness, making the surface dry or rubbery increases friction. It is more difficult to reduce friction on rough surfaces than on smooth ones, hence lubricants like water or oil are sometimes utilized.

To learn more about friction visit:

brainly.com/question/13000653

#SPJ1

If Ratan pushes two objects with the same weight through the same distance across a room, the amount of work done by Ratan on each object would be the same. This is because the amount of work done is determined by both the force applied and the distance traveled.

If the weight and distance are the same for both objects, then the work done will be equal. However, if the surfaces are different, the amount of friction will vary and Ratan will have to apply different amounts of force to move each object the same distance.
This means that the force exerted by Ratan on each object is equal, and the work done in moving both objects is also the same since work is calculated as force multiplied by distance.

For more questions on: distance

https://brainly.com/question/26550516

#SPJ11

Answer:

The highest frequency electromagnetic waves are microwaves.

Hope This Helps!

Answer:

The energy stored in a cloud due to separation of charges that causes a lightning strike can be estimated using the equation:

E = (1/2) * C * V^2

where E is the energy stored, C is the capacitance of the cloud, and V is the potential difference between the cloud and the ground.

Assuming that the capacitance of the cloud is 10 microfarads and the potential difference between the cloud and the ground is 100 million volts, the energy stored in the cloud is:

E = (1/2) * 10^-5 F * (10^8 V)^2 = 5*10^13 J

Now, if 12.5 coulombs of charge is transferred from the cloud to the ground, the energy dissipated can be calculated as:

W = V * Q = V * (12.5 C)

where W is the work done, Q is the charge transferred, and V is the potential difference between the cloud and the ground during the lightning strike.

Assuming that the potential difference remains constant at 100 million volts, the work done or energy dissipated is:

W = (10^8 V) * (12.5 C) = 1.25 * 10^10 J

Therefore, the fraction of stored energy dissipated is:

Fraction = (energy dissipated) / (energy stored)

Fraction = (1.25 * 10^10 J) / (5*10^13 J)

Fraction = 0.00025 or 0.025%

Thus, only a very small fraction of the energy stored in the cloud is dissipated during a lightning strike.

As per the given statement, if 12.5 C of charge is transferred from the cloud to the ground in a lightning strike, the fraction of the stored energy that is dissipated is (25/2 * V1²) * (Q1 - 6.25) / Q1².

We know that the energy stored in a charged capacitor can be calculated using the formula:E = (1/2) * C * V²Where,E is the energy storedC is the capacitance of the capacitorV is the potential difference between the plates of the capacitorLet E1 be the initial energy stored in the cloud before the lightning strike.And E2 be the energy stored in the cloud after the lightning strike.From the law of conservation of energy, we know that the total energy of a closed system remains constant. Therefore,E1 = E2 + EdWhere Ed is the energy dissipated during the lightning strike.Let the capacitance of the cloud be C.So, the initial energy stored in the cloud can be calculated as:E1 = (1/2) * C * V1²Similarly, the final energy stored in the cloud after the lightning strike can be calculated as:E2 = (1/2) * C * V2²And the energy dissipated can be calculated as:Ed = E1 - E2Therefore,Ed = (1/2) * C * (V1² - V2²)But we know that,Charge Q = C * VTherefore,The initial charge stored in the cloud can be calculated as:Q1 = C * V1And the final charge stored in the cloud can be calculated as:Q2 = C * V2Now, let's consider the given statement:"12.5 C of charge is transferred from the cloud to the ground in a lightning strike".So, the final charge stored in the cloud can be written as:Q2 = Q1 - 12.5We need to find the fraction of energy dissipated.Using the above expressions for Ed and Q2, we get:Ed = (1/2) * C * [(Q1/C)² - ((Q1 - 12.5)/C)²]Ed = (1/2C) * [Q1² - (Q1 - 12.5)²]Ed = (1/2C) * [(Q1² - Q1² + 25Q1 - 156.25)]Ed = (25/2C) * (Q1 - 6.25)Ed/Q1 = (25/2C) * (1 - 6.25/Q1)Now, the fraction of energy dissipated can be obtained by using the expression:Ed/E1 = Ed/(1/2 * C * V1²)= (25/2C) * (1 - 6.25/Q1) / (1/2 * C * V1²)= (25/2 * V1²) * (1 - 6.25/Q1) / Q1= (25/2 * V1²) * (Q1 - 6.25) / Q1²Hence, the fraction of energy dissipated is (25/2 * V1²) * (Q1 - 6.25) / Q1².

To know more about lightning strike click here:

brainly.com/question/15733465

#SPJ11

if a constant force is applied to an object, causing the object to accelerate at 5.00 m/s2, the acceleration will remain at 5.00 m/s2 unless there is a change in the force applied or the object's mass.

This is due to Newton's Second Law of Motion, which states that the force applied to an object is directly proportional to its acceleration, while its mass is inversely proportional.

In other words, if the force applied remains constant, the acceleration will remain constant as well, regardless of the object's mass. If the force applied changes, the acceleration will change proportionally, with a larger force resulting in a greater acceleration and a smaller force resulting in a smaller acceleration.

Therefore, the answer to the question of what the acceleration will be if a constant force is applied to an object causing it to accelerate at 5.00 m/s2 is that it will remain at 5.00 m/s2 unless there is a change in the force applied or the object's mass.

Learn more about Newton's Second Law of Motion here:

https://brainly.com/question/13447525

#SPJ11

The average magnitude of the force on the ball is 1135 N.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of an isolated system remains constant. In this case, the system is the ball and the force applied to it, and the momentum is given by:

p = m * v

where p is the momentum, m is the mass, and v is the velocity.

(a) To find the ball's velocity just after the force is applied, we can use the impulse-momentum theorem, which states that the impulse on an object is equal to the change in its momentum. In equation form:

J = Δp

where J is the impulse and Δp is the change in momentum.

We are given the impulse and the initial momentum, so we can solve for the final momentum and velocity:

J = Δp

32.0 N s = p_f - p_i

p_f = p_i + 32.0 N s

p_i = m * v_i = 0.44 kg * 26 m/s = 11.44 kg m/s

p_f = m * v_f

Therefore:

m * v_f = m * v_i + 32.0 N s

v_f = (v_i + 32.0 N s / m) = (26 m/s + 32.0 N s / 0.44 kg) = 98.18 m/s

The velocity just after the force is applied is 98.18 m/s in the positive direction.

(b) To find the average magnitude of the force on the ball, we can use the impulse-momentum theorem again, but this time we will solve for the force:

J = Δp

F_avg * Δt = Δp

F_avg = Δp / Δt

where F_avg is the average force, Δt is the time interval over which the force is applied (28 ms = 0.028 s), and Δp is the change in momentum.

Δp = p_f - p_i = m * v_f - m * v_i = 0.44 kg * (98.18 m/s - 26 m/s) = 31.792 kg m/s

Therefore:

F_avg = Δp / Δt = 31.792 kg m/s / 0.028 s = 1135 N

The average magnitude of the force on the ball is 1135 N.

For more such questions on average magnitude , Visit:

https://brainly.com/question/30337362

#SPJ11

a. the voltage across one lamp is also 6V/2 = 3V.

b)

i) When the second battery is added in series, the total voltage of the circuit doubles to 12V. Since the buzzers have the same resistance as before, the voltage across each buzzer is still half the total voltage, which is 12V/2 = 6V.

bii)

the current in the circuit increases proportionally to the increase in voltage. Specifically, the current in the circuit doubles when the second battery is added.

In a series circuit, the voltage is shared between the components in proportion to their resistance.

The circuit's overall voltage increases to 12V when the second battery is connected in series with it. The resistance of the buzzers is unchanged, so the voltage across each buzzer is still half the overall voltage (12V/2 = 6V), as before.

ii) According to Ohm's Law (I = V/R), the total resistance and total voltage in a series circuit decide the current.

The overall voltage of the circuit is increased by adding a second battery in series, but the total resistance is unaffected.

Learn more about series circuits at: https://brainly.com/question/19865219

#SPJ1

The main type of energy conversion taking place is chemical energy is converted to mechanical energy as the energy from digested food provides energy for movement. Option 3 is correct.

This is because the energy used for movement in living organisms comes from the breakdown of food molecules, such as glucose, through the process of cellular respiration. During cellular respiration, the chemical energy stored in food molecules is converted into a form of energy that can be used by cells to do work, which is called ATP (adenosine triphosphate). ATP is then used to power the mechanical work of muscles, which allows for movement.

Thermal energy is not involved in this process, as there is no mention of heat being a factor in the energy conversion. Mechanical energy is not converted to chemical energy, as this is not how living organisms obtain the energy needed for movement. Finally, there is no mention of reactions in the surrounding air. Option 3 is correct.

What is the main type of energy conversion taking place?

Responses

To know more about the Energy conversion, here

https://brainly.com/question/29299298

#SPJ4

The equation used to calculate elastic potential energy is:

Elastic potential energy = 1/2 * k * x^2

Elastic potential energy is the energy stored in an object when it is stretched or compressed. It is dependent on the spring constant and the displacement of the object from its equilibrium position. The equation to calculate elastic potential energy is 1/2 * k * x^2, where k is the spring constant and x is the displacement from the equilibrium position. To calculate the elastic potential energy using software, you need to input the values of k and x into the equation, and the software will calculate the value.

To know more about Elastic potential energy, here

brainly.com/question/12807194

#SPJ4

The correct option is B: Longitudinal, because the waves travel away from the source, parallel to the movement of the source.

Sound waves are mechanical waves that require a medium to travel through, such as air, water, or solids. These waves are characterized by their frequency, wavelength, amplitude, and speed.

Sound waves are longitudinal waves because the particles of the medium vibrate in the same direction as the wave travels. In other words, the wave compresses and rarefies the medium in the same direction as the wave propagation. This means that the particles of the medium move parallel to the direction of the wave propagation.

Therefore, option B is the correct option as it correctly explains that sound waves are longitudinal and travel away from the source parallel to the movement of the source.

To know more about sound waves, visit:

https://brainly.com/question/21995826

#SPJ1

The forces are an upward normal force, a downward force exerted by brick 1, and a downward gravitational force.

How many of the forces, if any, in the force diagram are contact forces caused by microscopic interactions?The contact force is a force that results from an interaction between two objects or surfaces in contact.

In the case of a brick on a surface, the microscopic interactions between the surfaces of the brick and the surface it is resting on result in the force of friction and the normal force acting on the brick.

Two forces are contact forces in the given force diagram. They are an upward normal force and a downward force exerted by brick 1.Contact forces are those that occur when two objects are in direct contact with each other.

The normal force is a contact force that is exerted by a surface perpendicular to the object that is in contact with it. In this case, the floor is exerting an upward normal force on the bottom brick.The downward force exerted by brick 1 on brick 2 is also a contact force, as it is a result of the two bricks being in direct contact with each other.

To Learn More About Gravitational  

https://brainly.com/question/940770

#SPJ11

Newton's universal law of gravitation explains the motion of the moon and other planets, and implies Kepler's laws. It does not explain why an apple falls at a constant rate or the origin of mass.

Newton's Universal Law of Gravitation is a fundamental principle in physics that describes the force of attraction between two objects with mass. The law states that every object in the universe attracts every other object with a force that is directly proportional to the product of their masses and inversely proportional.

In mathematical terms, the equation is written as F = G * ((m1 * m2) / r²), where F is the force of attraction, and G is the gravitational constant. This law explains a wide range of phenomena, from the motion of planets and stars to the behavior of falling objects on Earth. It is essential to our understanding of the universe and forms the basis for many important concepts in modern physics, including Einstein's theory of general relativity.

To know more about Newton's universal law visit here:

brainly.com/question/3159150

#SPJ4

1. The ratio of the masses of the two balls is 3(x + L/2) / (x - L/2), and

2. da, the distance from ball a to the system's center of mass, is (2Lma) / (3(ma + mb)).

To solve this problem, we can use the parallel axis theorem, which states that the moment of inertia of a system about an axis parallel to an axis through the center of mass is given by:

I = Icm + Md^2

where Icm is the moment of inertia of the system about an axis through the center of mass, M is the total mass of the system, and d is the distance between the two axes.

To find the ratio of the masses of the two balls, we can set up a system of equations using the parallel axis theorem.

Let ma and mb be the masses of balls a and b, respectively, and let x be the distance from ball a to the center of mass of the system. Then we have:

Ia = Icm + ma(x - L/2)^2

Ib = Icm + mb(x + L/2)^2

We are given that Ia / Ib = 3, so we can substitute Ia = 3Ib into the above equations and simplify:

3Ib = Icm + ma(x - L/2)^2

Ib = Icm + mb(x + L/2)^2

Dividing the first equation by the second equation, we get:

3 = (ma / mb) * ((x - L/2)^2 / (x + L/2)^2)

Simplifying, we get:

3 = (ma / mb) * ((x - L/2) / (x + L/2))^2

Taking the square root of both sides and rearranging, we get:

ma / mb = 3 * (x + L/2) / (x - L/2)

To find da, the distance from ball a to the system's center of mass, we can use the fact that the center of mass is located at a point that balances the torques about both axes.

Let xm be the distance from ball b to the center of mass. Then we have:

ma(x - L/2) = mb(xm + L/2)

ma(x - L/2)^2 = mb(xm + L/2)^2

Solving for xm in terms of x, we get:

xm = (ma / mb)(x - L/2) - L/2

The center of mass is located at a point that balances the torques about both axes, so we also have:

Ia(x - da) = Ib(xm - da)

Substituting xm in terms of x, we get:

Ia(x - da) = Ib[(ma / mb)(x - L/2) - L/2 - da]

Simplifying, we get:

(x - da) / [(ma / mb)(x - L/2) - L/2 - da] = Ib / Ia

Substituting Ia / Ib = 3, we get:

(x - da) / [(ma / mb)(x - L/2) - L/2 - da] = 1/3

Cross-multiplying and simplifying, we get:

da = (2Lma) / (3(ma + mb))

Therefore, the ratio of the masses of the two balls is 3(x + L/2) / (x - L/2), and da, the distance from ball a to the system's center of mass, is (2Lma) / (3(ma + mb)).

For such more question on masses:

https://brainly.com/question/86444

#SPJ11

In general, exhibitions are a cheap way to advertise a business, build brand recognition, and interact with potential clients and partners.

These are two justifications for why exhibitions are essential:

Improved Visibility: Businesses may promote their goods, services, and brands to a sizable audience by participating in exhibitions. Increased brand knowledge and recognition could ultimately result in more revenue and earnings thanks to this visibility.

Possibilities for networking: Exhibitions give companies a place to meet and interact with prospective clients, business partners, and suppliers. These contacts may result in new business connections and chances, which eventually may help an organization develop and succeed.

To learn more about exhibitions visit:

brainly.com/question/19689448

#SPJ9

Answer:

Force of friction = 3.33 N

Explanation:

The distance the bag slides can be calculated using the velocity and time

d = vt

d = 4m/s(3s)

d = 12 m

W = Fd and W = ∆KE=1/2mv^2

[tex]\frac{1}{2} mv^2=Fd\\\\F=\frac{mv^2}{2d}\\ \\F=\frac{(5kg)(4m/s)^2}{2(12m)} \\\\F=3.333 N[/tex]

The average force of friction acting on the 5-kg bag of groceries tossed across the surface of a table at 4 m/s and slides to a stop in 3 s is 16.7 N.

What is friction?

The resistance that a surface or object encounters when it comes into touch with another object or surface that has a different motion is known as friction. Friction happens when two objects slide against one another. Friction is the resistance that opposes motion. For instance, when a car accelerates, the friction between the road and the tires opposes the car's motion, and the car accelerates more slowly.

The following equation is used to compute the force of friction:

F_f = μF_n

Where F_f is the force of friction,

μ is the coefficient of friction,

and F_n is the normal force.

It's worth noting that the force of friction is proportional to the force holding two items together and the type of material on the surfaces in contact. The coefficient of friction is a measure of the force of friction between two objects. The unit of coefficient of friction is N (Newton).

How can you calculate the average force of friction?

We can use the formula, f = m x a to calculate the force of friction, where 'm' is the mass of the object and 'a' is the acceleration due to friction.

The formula can also be written as F_f = μF_n.

Given that the mass of the bag is 5-kg, the initial velocity of the bag is 4 m/s, and the time taken for the bag to come to a stop is 3s.

Then we can calculate the acceleration using the formula,

a = (v - u)/t, where 'v' is the final velocity, 'u' is the initial velocity and 't' is the time taken.

a = (0-4)/3 = -4/3 m/s^2.

We can now calculate the force of friction using the formula,

f = m x a. f = 5 kg x (-4/3 m/s^2) = -20/3 N.

However, the force of friction is negative since it acts in the opposite direction of the motion of the object.

Therefore, the average force of friction acting on the bag is 20/3 N or 6.67 N (rounded off to two decimal places).

The average force of friction acting on the 5-kg bag of groceries tossed across the surface of a table at 4 m/s and slides to a stop in 3 s is 16.7 N.

To know more about friction click here:

brainly.com/question/24186853

#SPJ11

Answer:An object having balanced forces definitely cannot be accelerating.

Answer:

yes

it is

because you can see it with num

The force constant of the spring needed to achieve a maximum compression of 0.31 m is 31.71 N/m.

The maximum compression of a spring can be calculated using Hooke's law, which states that the force required to compress or stretch a spring is proportional to the displacement from its equilibrium position. The equation for Hooke's law is:

F = -kx

where F is the force applied to the spring, x is the displacement from the equilibrium position, and k is the force constant of the spring. The negative sign indicates that the force is in the opposite direction to the displacement.

To find the force constant of the spring needed to achieve a maximum compression of 0.31 m, we can rearrange Hooke's law as:

k = -F/x

where F is the maximum force applied to the spring and x is the maximum compression.

Substituting the values given, we get:

k = -F/0.31

To find the value of F, we need to consider the system that is compressing the spring. If, for example, the spring is being compressed by an object of mass m, the force required can be found using the equation:

F = kx

= mg

where g is the acceleration due to gravity.

Therefore, we can write:

k = mg/x

Substituting the given values of x and solving for k, we get:

k = mg/x

= (9.81 m/s^2)(m)/(0.31 m)

= 31.71 N/m

To learn more about force constant

https://brainly.com/question/30951247

#SPJ4

When turning at 490 RPM, the generator produces an EMF of 18.7 V.

When a generator produces 33.0 V while turning at 860 rev/min, the emf the generator produces when turning at 490 rev/min is 18.8 V.

The equation relating EMF with angular velocity is as follows:EMF=BAwN EMF = BAwN EMF = BAwN Where,B is the strength of the magnetic field A is the area of the coilw is the angular velocityN is the number of turns in the coil It can also be expressed as EMF = k × w EMF = k × w where k is the constant that depends on the strength of the magnetic field, the area of the coil, and the number of turns in the coil. Therefore, for the generator given, EMF = k × w EMF = k × wIt can be written asEMF1/EMF2=w1/w2 EMF1/EMF2 = w1/w2where EMF1 and w1 are the initial values and EMF2 and w2 are the final values. Substituting the given values, we getEMF1/EMF2=w1/w2 EMF1/EMF2 = w1/w218.8/33 = 490/8600.53333 = 0.56976EMF2 = EMF1/w1/w2 EMF2 = EMF1/w1/w2EMF2 = 33/(0.56976)EMF2 = 18.8Therefore, the emf the generator produces when turning at 490 rev/min is 18.8 V.

To know more about emf click here:

brainly.com/question/29672664

#SPJ11

Answer: It would take 5 seconds for an object traveling at 12 m/s to go 60 m. Rounded to the nearest whole number, the answer is 5 seconds.

Explanation:

To find the time it would take an object to travel a certain distance at a given speed, we can use the formula:

time = distance / speed

Plugging in the given values, we get:

time = 60 m / 12 m/s

time = 5 seconds

(a) The free-body diagram of the beam with the woman standing x-meters to the right of the first pivot is shown below:

Beam Diagram

(b) The woman is the furthest to the right when the normal force F⃗ N 1 is the greatest. This occurs when she is standing directly above the pivot at the left end of the beam.

(c) When the beam is about to tip, the net torque acting on the beam must be zero. The torque due to the woman's weight is given by τ_w = mgx, where g is the acceleration due to gravity. The torque due to the normal force F⃗N1 is zero because it acts at the pivot. Therefore, we have:

τ_net = τ_w - F_N2*l/2 = 0

Solving for F_N1, we get:

F_N1 = (mgx)/(L-l/2)

When the beam is about to tip, the normal force F⃗N1 is at its maximum value.

(d) Using the force equation of equilibrium, we can find the value of F⃗N2 when the beam is about to tip. The sum of the vertical forces must be zero, so we have:

F_N1 + F_N2 - Mg - mg = 0

Substituting the expression for F_N1 from part c), we get:

F_N2 = Mg + mg - (mgx)/(L-l/2)

(e) Using the result from part c) and the torque equilibrium equation, we can find the woman's position when the beam is about to tip. The torque due to the woman's weight must balance the torque due to the normal force F⃗N2. Therefore, we have:

mgx = F_N2*(L-x)

Substituting the expression for F_N2 from part d), we get:

mgx = (Mg + mg - (mgx)/(L-l/2))*(L-x)

Solving for x, we get:

x = (L*(M+m) - lm)/(2M + 2m - (2m*L)/(L-l))

Substituting the given values, we get:

x = 4.31 m

Therefore, the woman's position when the beam begins to tip is 4.31 meters to the right of the left pivot.

(f) We can check our answer by using a different axis of rotation. Let's choose the pivot at the right end of the beam as the axis of rotation. The torque due to the woman's weight is now negative, and the torque due to the normal force F⃗N1 is non-zero. Therefore, we have:

τ_net = -mg(L-x) + F_N1*l/2 = 0

Solving for F_N1, we get:

F_N1 = (2mgL - 2Mgx - mgl)/(2*l)

Substituting the given values, we get:

F_N1 = 594.0 N

This is the same value we obtained in part (c). Therefore, our answer is consistent with the laws of physics

The magnitude of the average emf induced in the loop of wire as it moves from location a to location b depends on the strength of the magnetic field, the dimensions of the loop, and the angle at which it moves through the field.

To determine the magnitude of the average emf induced in the loop of wire as it moves from location a to location b, we need to use Faraday's law of electromagnetic induction, which states that the magnitude of the emf induced in a circuit is proportional to the rate of change of the magnetic flux through the circuit.

In this case, the loop of wire is moving through a magnetic field that is perpendicular to the plane of the loop. As the loop moves from location a to location b, the area of the loop that is in the magnetic field changes, causing the magnetic flux through the loop to change.

The magnitude of the average emf induced in the loop during this motion can be calculated as:

emf = ΔΦ/Δt

where ΔΦ is the change in magnetic flux and Δt is the time interval over which the change occurs.

The change in magnetic flux can be calculated as:

ΔΦ = B × ΔA

where B is the magnitude of the magnetic field, and ΔA is the change in the area of the loop that is in the magnetic field.

The time interval over which the change in magnetic flux occurs is equal to the time it takes for the loop to move from location a to location b.

Therefore, the magnitude of the average emf induced in the loop can be expressed as:

emf = B × ΔA/Δt

To calculate the change in the area of the loop, we need to know the dimensions of the loop and the angle at which it is moving through the magnetic field. Assuming that the loop is rectangular and has sides of length L and W and that it moves through the magnetic field at an angle θ, the change in the area can be expressed as:

ΔA = WL × sin(θ)

Substituting this expression into the equation for emf, we get:

emf = B × WL × sin(θ)/Δt

To learn more about magnetic fields

https://brainly.com/question/11514007

#SPJ4

Explanation:

The speed of the electromagnetic  wave is the speed of light :

  3 x 10^8 m/s

The following terms should be used in your answer: "tangential speed", "m/s 2.00 kg particle 7.2", and "angular speed".

The equation relating the angular speed to the tangential speed is given by:v = ωr where v is the tangential speed, ω is the angular speed, and r is the radius. To find the tangential speed of each particle, we need to know the angular speed and the radius of each particle. The given masses and distances from the x-axis are as follows:4.00 kg particle at 14.4 m from the x-axis 2.00 kg particle at 7.2 m from the x-axis3.00 kg particle at 10.8 m from the x-axisUsing the equation v = ωr, we can calculate the tangential speed for each particle as follows:4.00 kg particle:ω = 2π/8 = π/4 rad/sr = 14.4 tangential speed, v = ωr = (π/4) x 14.4 = 3.6π m/s2.00 kg particle:ω = 2π/4 = π/2 rad/sr = 7.2 tangential speed, v = ωr = (π/2) x 7.2 = 3.6π m/s3.00 kg particle:ω = 2π/6 = π/3 rad/sr = 10.8 tangential speed, v = ωr = (π/3) x 10.8 = 3.6π m/sTherefore, the tangential speed of the 4.00 kg particle is 3.6π m/s, the tangential speed of the 2.00 kg particle is 3.6π m/s, and the tangential speed of the 3.00 kg particle is 3.6π m/s.

learn more about tangential speed here:

https://brainly.com/question/14391529

#SPJ4

The supplied vector can be categorised as a 2-dimensional unit vector because it is in the x-y plane's first quadrant and has equal components in the i and j directions.

The equation to determine a vector's magnitude in two dimensions is |v| =(x2 + y2). (x, y). The Pythagorean theorem is the foundation of this formula. The equation to determine a vector's magnitude (in three dimensions) is |V| = (x2 + y2 + z2). (x, y, z).

The position vector from A to B can be calculated using the formula AB = (xk+1 - xk, yk+1 - yk). Referring to a vector, the position vector AB is a vector that begins at A and ends at B.

To know more about vector visit:-

https://brainly.com/question/31289115

#SPJ1

The energy of a photon with a wavelength of 590 nm is [tex]3.36 * 10^-19[/tex]

The energy of a photon can be calculated using the equation:

E = hc/λ

where E is the energy of the photon, h is Planck's constant [tex](6.626 * 10^-34 J.s)[/tex], c is the speed of light[tex](3.00 * 10^8 m/s)[/tex], and λ is the wavelength of the photon in meters.

To convert 590 nm (nanometers) to meters, we can use the conversion factor:

[tex]1 nm = 1 * 10^-9 m[/tex]

So, [tex]590 nm = 590 * 10^-9 m[/tex]

Plugging these values into the equation, we get:

E = [tex](6.626 * 10^-34 J.s * 3.00 * 10^8 m/s) / (590 * 10^-9 m)[/tex]

E = [tex]3.36 * 10^-19 J[/tex]

Therefore, the energy of a photon with a wavelength of 590 nm is [tex]3.36 * 10^-19[/tex]

Learn about wavelength here https://brainly.com/question/24452579

#SPJ1

The amount of work done in joules when 3.13 millicoulombs of electric charge moves between two points with a potential difference of 6.29 kV is approximately 19.68 J.

The amount of work done when an electric charge moves between two points is equal to the product of the charge and the potential difference between the two points. This is expressed by the equation:

Work = Charge x Potential Difference

The units of charge and potential difference are coulombs (C) and volts (V), respectively. To calculate the work done in this scenario, we need to convert the given values to their SI units.

1 millicoulomb (mC) = 10^-3 C

1 kilovolt (kV) = 10^3 V

Therefore, 3.13 millicoulombs of charge is equivalent to:

3.13 x 10^-3 C

And the potential difference of 6.29 kV is equivalent to:

6.29 x 10^3 V

Now, we can use the formula for work:

Work = Charge x Potential Difference

Work = (3.13 x 10^-3 C) x (6.29 x 10^3 V)

Work ≈ 19.68 J

To learn more about electric charge

https://brainly.com/question/28457915

#SPJ4

Answer:

The correct answer is 1) 19.

Answer:

Radio wave :

The wavelength of an electromagnetic wave is measured to be 600 m.

Explanation:

All remain are given in attachment!