An immediate strength loss. This is why Sling Webbing has red core yarns to visually reveal damage and act as a basis for sling rejection.
▞▞<☵>▆▇█▓▒░─╤╦╱彡( ⱫɆ₳Ⱡ )彡╲╦╤─░▒▓▇▆▅<☵>▞▞
The purpose of the red-core yarns in the synthetic sling is to detect the strength loss and also to reveal the damage in the red corn yarns.
What is synthetic sling?Lifting slings constructed of synthetic materials like nylon or polyester are known as synthetic slings. These kinds of slings, which can also be called synthetic lifting straps or synthetic rigging slings, are thin, flexible, and protected by a jacket.
Sling Webbing features red core yarns to visibly indicate damage and serve as a reason for sling rejection because of this. Synthetic sling are flexible.
Therefore, it can be concluded that The red-core yarns in the synthetic sling are used to both reveal and detect strength loss in the red maize yarns. It also acts as the basis for sling rejection.
Learn more about Synthetic sling here:
https://brainly.com/question/27088476
#SPJ2
10. "PPE is the control of last resort." What does this mean?
Answer:
protect the employee once the hazard into contact with them.
binary classification algorithm
Answer:
What is this exactly?
Explanation:
If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.
explain the sphere gap method of measuring dc ac and impulse voltages
Answer:
The voltage to be measured is applied between the two spheres and the distance or spacing S between them gives a measure of the sparkover voltage. ... In the case of a.c. peak value and d.c. voltage measurements, the applied voltage is uniformly increased until sparkover occurs in the gap.
Read an integer from the user repeatedly, until the user enters a negative number. use for loop (C programming)
Answer:
go on then
Explanation:
Twisting force is known as:
Select one:
A. thrust.
B. horsepower.
C. torque.
D. energy.
qué es una nube informática
List the crops that can be used dibbler .
Answer:
A dibber or dibble or dibbler
Explanation:
A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber
As the amplitude decreases in a wave the energy increasesTrue or false
Answer:
True
Explanation:
To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.
All of the following are common strategies for finding ideas EXCEPT
creating analogies.
O brainstorming with others.
examining existing products.
sitting and walng for inspiration.
Answer:
D. sitting and waiting for inspiration.
Explanation: Seems less reliable then then others
The process of refining specification involves
O defining the initial design.
O presenting the finished product to a client.
deciding whether or not to continue with a project.
O adjusting outcomes and making pragmatic changes.
Answer:
I'm not sure but I'm pretty sure it the second one (btw I'm sorry if this didn't help) :/
Twisting force is known as: A. thrust.
B. horsepower.
C. torque.
D. energy
what is Agriculture and Environmental Engineering
Answer:
Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.
Write an
algorithm and draw a flowchart to convert the length in feet to
centimeter
Answer:
blah blah blah sh ut up read learn
A nut driver is a variation of a socket wrench, true?
Answer:
TRUE
Explanation:
variable head permeability ?
Answer:
The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.
Explanation:
State Conditions necessary for static equilibrium of a particle of a rigid body
Answer:
Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.
Hi there!
For a particle to be in static equilibrium:
[tex]\huge\boxed{\Sigma \tau = 0}}[/tex]
The sum of torques acting on the particle must equal 0 Nm.
[tex]\huge\boxed{\Sigma F = 0}}[/tex]
The sum of forces acting on the particle must equal 0 N.
Both of these conditions MUST be met in order for a particle to be in STATIC equilibrium.
1. A company has an annual demand for a product of 2000 units, a carrying cost of $20per unit per year, and a setup cost of $100. Through a program of setup reduction, thesetup cost is reduced to $20. Run costs are $2 per unit. Calculate:
A. The EOQ before setup reduction.
B. The EOQ after setup reduction.
C. The total and unit cost before and after setup reduction.
Answer:
B the EOQ after setup reduction.
Through a program of setup reduction, thesetup cost is reduced to $20. Run costs are $2 per unit. CalculateThe EOQ after setup reduction. Hence, option B is correct.
What is meant by EOQ?The amount of an order known as a "economic order quantity" (EOQ) is one that lowers the overall cost of acquiring and maintaining inventories of goods or raw materials.
The supplier should be contacted to ascertain the optimal inventory size in order to lower the company's overall annual inventory cost. Economic order quantity, or EOQ, is the phrase. Supply, logistics, and operations management all use this measurement.
In its most basic form, EOQ is a technique for determining the quantity and frequency of orders required to satisfy a particular level of demand while reducing the cost per order.
Thus, option B is correct.
For more information about EOQ, click here:
https://brainly.com/question/13049890
#SPJ2
As
is the rate (in time and distance) at which that force
is a twisting or turning force,
is produced
(
Select one:
O A. Torque; horsepower; torque
OB. Torque; horsepower; horsepower
O C. Horsepower; torque; horsepower
O D. Horsepower; torque; torque
Clear my choice
Answer:
C
Explanation:
As horsepower is the rate at which that force torque is a twisting or turning force, horsepower is produced. Hence option C is correct.
What is horsepower?Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.
To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.
Thus, as horsepower is the rate at which that force torque is a twisting or turning force, horsepower is produced. Hence option C is correct.
To learn more about horsepower, refer to the link below:
https://brainly.com/question/12260337
#SPJ2
type the correct answer in the box Spell all words correctly
Damien wants to study the effect on a material's elasticity after it is submerged in water for varying durations. What type of graphical tool should
holin
Damien can stucty how the material behaves when immersed by using a
Curve
Damien can study how the material behaves when immersed by using a; Stress - Strain Curve
To determine the elasticity of a material, we need to find the elastic modulus because the elastic modulus is what quantifies the elasticity of the material.
Now, formula for elastic modulus is;
E = stress/strain
Now, to study the effect on a material's elasticity after it is submerged in water for varying durations, since elasticity is based on the stress and strain on the material, we need to draw a graph of stress vs strain which is also called a stress - strain curve.
The stress strain curve is a graphical tool that helps us know to know the amount of load a material can take before it will stretch and break.
Read more about stress - strain curves at; https://brainly.com/question/22394570
Anything that is made to meet a need or desire is?
a) Design
b) Technology
c) Process
d) Tool
Answer:
Technology
Explanation:
It’s made to meet desire
It should be noted that Anything that is made to meet a need or desire is Technology.
What is Technology?Technology can be regarded as the practical application of science.
Technology can be seen in areas such as
CommunicationTransportationAgricultureHowever, Technology came up because of the necessity for it, people desire it.
Learn more Technology at;
https://brainly.com/question/25110079
Using what you know about the NAND gate, draw how you could implement a three-input NAND gate using NMOS and PMOS transistors. This circuit should output logic low (0V) only when all three inputs (A, B, and C) are logic high (5V)
Answer:
use this, it should help you understand
Explanation:
https://www.electronics-tutorials.ws/logic/logic_5.html
Technician A states that about 33% of the heat energy created is wasted by being dumped straight out
of the exhaust to the atmosphere. Technician B states that 33% is wasted by internal friction and from
radiating off hot engine components straight to the atmosphere. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither Anor B
Heat energy is the known to be a product of the movement of tiny particles called atoms, molecules or ions. The true statement is by Technician A.
Internal combustion engine is dependent on the heat of combustion so as to make torque to move the vehicle and power the system.
A lot of heat made during combustion is not often used productively and therefore need to be removed to avoid overheating of the engine.
The heat energy that is not used for is wasted in three ways: They are:
About 33% is wasted by being dumped straight out of the exhaust to the atmosphere. About 33% is wasted by the cooling system, which prevents overheating of the engine components. About 5% is wasted by internal friction and from radiating off of hot engine components straight to the atmosphere.Learn more from
https://brainly.com/question/14566159
The following problem refers to triangle ABC, find all missing parts. Round degrees to 1 decimal places and
sides to the nearest whole number.
A = 36.5°C = 67.5°, c = 224 inches
A=
В.
C
O
O
490 do
a =
inches
inches
inches
C-
Answer:
A =41 .....
......
......
....C=21
Discuss on forced convection heat transfer with real examples.
Answer:
forced convection
Explanation:
When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.
In the figure, particle 1 of mass m1 = 3.1 kg slides rightward along an x axis on a frictionless floor with a speed of 5.0 m/s. When it reaches x = 0, it undergoes a one-dimensional elastic collision with stationary particle 2 of mass m2 = 4.6 kg. When particle 2 then reaches a wall at xw = 79 cm, it bounces from the wall with no loss of speed. At what position on the x-axis does particle 2 then collide with particle 1?
Answer:
We use Eq 9−67 and 9−68 to find the velocities of the particles after their first collision (at x=0 and t=0 )
ν
1f
−
m
1
+m
2
m
1
+m
2
ν
1i
=
0.30kg+0.40kg
0.30kg−0.40kg
(2.0m/s)=−0.29m/s
ν
2f
=
m
1
+m
2
2m
1
ν
1i
=
0.30kg+0.40kg
2(0.30kg)
(2.0m/s)=1.7m/s .
At a rate of motion of 1.7m/s,2x
w
=140cm (the distance to the wall and back to x=0 ) will be traversed by particle 2 in 0.82s . At t=0.82s , particle 1 is located at
x=(−2/7)(0.82)=−23cm ,
and particle 2 is " gaining " at a rate of (10/7)m/s leftward ; this is their relative velocity at that time . Thus , this "gap" of 23cm between them will be closed after an additional time of (0.23m)/(10/7m/s)=0.16s has passed . At this time (t=0.82+0.16=0.98s) the two particles are at x=(−2/7)(0.98)=−28cm
Explanation:
As an engineer you are responsible for selecting and procuring pump for your water distribution system. After some background study you selected and purchased an 1160 rpm Taco 4013 FI and CI series pumps with a 12.75 impeller diameter (for details see the ppt slides for the pump chapter). After procuring the pump you realize that you should have purchased a similar pump but with a 2000 rpm.
Required:
a. What will be your approach to handle this situation?
b. How would you prepare a performance curve at 2000 rpm?
pretty ako hjshjs ok.
Answer:
wala naman pong pic po wala kahit walang pic magan da parin
How does science and technology address the problems of the society?
Answer:
By ads online video (sorry if this doesn't help
Answer:
Through science and technology, we have solved many of humanity's problems, including hunger (at least in the Western world) with farming technologies and curing diseases through medical technologies. Inventions such as dishwashers, washing machines, and artificial lights have saved us immense amounts of time.
Explanation:
Science can not solve all of our problems. While scientific understanding can help battle things like disease, hunger, and poverty when applied properly, it does not do so completely and automatically. Furthermore, there are many areas of life where science can have little impact.
Engineer It A water heater is a tank in which cold water is heated. Cold water flows into the tank to keep it full. A heating element warms the water inside the tank. The heated water can then be sent to hot water faucets in a building. Assume that a water heater design requires the hottest water possible to be sent to hot water faucets in a building. Where would be the best place for the hot water outlet pipe to be attached to the tank: the top, the middle, or the bottom of the tank? Explain your answer.
Answer:
i think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top
Explanation:
I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.
What is Heater?The process of transforming electrical current into heat energy is known as electric heating. An electrical resistor serves as the heating element in an electric heater, and heat is generated there when an electric current flows through it.
This procedure is frequently utilized in a wide range of domestic applications. from using an electric burner to prepare food, a kettle to boil water, and of course, house heating.
With one significant exception—they don't rely on a boiler and a system of pipes to produce the heat—electric heaters and radiators function exactly like your central heating radiators that are plumbed in.
Therefore, I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.
To learn more about Heating, refer to the link:
https://brainly.com/question/1429452
#SPJ2
Why does a
generally decrease
with increasing
bond energy?
Answer:
What is the real meaning of this questions
Answer:
what whatwhat whatwhat the town hall meeting at the office in the morning and I can get you a new one for the kids