The ammonia gas's final temperature is 417.3 K. It moved from having a volume of 250 mL, a pressure of 3.84 atm, and a temperature of 35 oC to having a pressure of 5.84 atm and a volume of 215 mL.
To solve this problem, we can use the combined gas law, which states:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
Where:
P1 = 3.84 atm
V1 = 250 mL
T1 = 35ºC + 273.15 = 308.15 K (temperature must be in Kelvin)
P2 = 5.84 atm
V2 = 215 mL
T2 = ?
We can rearrange this equation to solve for T2:
T2 = (P2 * V2 * T1) / (P1 * V1)
T2 = (5.84 atm * 215 mL * 308.15 K) / (3.84 atm * 250 mL)
T2 = 417.3 K
Therefore, the final temperature of the ammonia gas is 417.3 K.
Learn more about ammonia gas's here :
https://brainly.com/question/28204449
#SPJ1
Select the best answer for the question.
16. Which statement gives you enough information to say that the atom is electrically
neutral?
A. The atom has 15 neutrons and 15 electrons.
B. The atom has 19 electrons and 19 neutrons.
C. The atom has 7 protons and 7 electrons.
D. The atom has 4 neutrons and 4 protons.
When Muhammad died, his followers carried on the new religion. Islam prospered and grew under the Caliph Abu-Bakr and those who followed him. What cities became hubs of Muslim thought and power? How did word of this new religion spread? Did it appeal to people outside the Arabian Peninsula?
Explanation:
what is the relationship between absorbance and concentration, and how is this illustrated in your spectra of the buffered 2-naphthol solutions? g
The term absorbance is directly proportional to the concentration (c) of the solution which is used in the experiment of the spectra.
The absorbance is defined as the term which is said to be directly proportional to the length of the light path that is equal to the width of the cuvette. The relationship between concentration and absorbance can be explained by the Beer-Lambert law. This law relates the attenuation of light to the properties of a material. The Beer-Lambert law is defined as the law which states that the concentration of a chemical solution is directly proportional to its absorption of light.
The acid dissociation constants were determined in the spectra will be 2.97 pKa* and 9.47 pKa. The pKa and pKa* values are corresponded well with literature values of 9.45 and 3.0 with a 0.2 and 1.0% difference, respectively. This was determined that 2-naphthol is a weaker acid in the ground state than the excited state due to the value of pKa > pKa.
To learn more about absorbance
https://brainly.com/question/14919298
#SPJ4
write the balanced molecular equation for the following:
A sample of nitrosyl chloride gas, NOCI, was placed in a reactor and heated to
227°C until the system reached equilibrium. The contents of the reactor were then
analyzed and found to contain gaseous chlorine and nitrogen monoxide.
The balanced molecular equation when nitrosyl chloride gas, NOCI, is heated to produce gaseous chlorine and nitrogen monoxide is:
2NOCl(g) ⇔ Cl₂(g) + 2NO(g)
How do i write the balanced molecular equation?Chemical equation is simply a ritrogen monoxide epresentation of chemical reactions using the symbols and formula of elements. We must understand, that every reaction has two sides i.e reactants and products.
The balancing of chemical equation must obey the law of conservation of matter other wise, atoms will either be created or destroyed during the reaction.
Now we shall write the balanced molecular equation for the reaction invoving the heating of nitrosyl chloride gas, NOCI. Details below:
Nitrosyl chloride gas => NOClGaseous chlorine => Cl₂Nitrogen monoxide => NONitrosyl chloride gas ⇔ Gaseous chlorine + Nitrogen monoxide
NOCl(g) ⇔ Cl₂(g) + NO(g)
There are 2 atoms of Cl on the right and 1 atom on the left. It can be balanced by writing 2 before NOCl as shown below:
2NOCl(g) ⇔ Cl₂(g) + NO(g)
There are 2 atoms of N on the left and 1 atom on the right. It can be balanced by writing 2 before NO as shown below:
2NOCl(g) ⇔ Cl₂(g) + 2NO(g)
Thus, the equation is balanced.
Learn more about balancing equation:
https://brainly.com/question/12192253
#SPJ1
A group of students is comparing the graphs of strong acid-strong base and weak acid-strong base titration curves, where the base is the titrant. Which statement inaccurately describes a difference between the two curves?
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve because the weak acid requires more titrant to be neutralized than the strong acid, so the pH changes more slowly initially.
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
This statement is inaccurate. In fact, the initial pH for the weak acid-strong base curve is lower than the initial pH for the strong acid-strong base curve. This is because a weak acid has a higher initial pH than a strong acid due to the lower concentration of H+ ions in solution.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the equivalence point of a weak acid-strong base titration, the pH is greater than 7 due to the presence of the conjugate base of the weak acid in solution. At the equivalence point of a strong acid-strong base titration, the pH is 7.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the half-equivalence point of a weak acid-strong base titration, the pH is greater than 7 because the solution contains both the weak acid and its conjugate base. At the half-equivalence point of a strong acid-strong base titration, the pH is 7.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
Learn more about concentration here:
https://brainly.com/question/13872928
#SPJ1
an acetic acid buffer containing 0.50 m ch3cooh and 0.50 m ch3coona has a ph of 4.74. what will the ph be after 0.0020 mol of hcl has been added to 100.0 ml of the buffer?
The pH of the buffer will increase from 4.74 to 4.76 after adding 0.0020 mol of HCl. This increase in pH indicates that the buffer is able to resist the change in pH caused by the addition of an acid.
To determine the new pH of the buffer after adding 0.0020 mol of HCl, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer to its acid dissociation constant (Ka) and the ratio of its conjugate base (A-) and acid (HA) concentrations. The equation is given as:
pH = pKa + log([A-]/[HA])
First, we need to determine the initial concentrations of CH3COOH and CH3COONa in the buffer solution. Since the buffer contains 0.50 M CH3COOH and 0.50 M CH3COONa, we can assume that the initial concentrations of CH3COOH and CH3COO- are both 0.50 M. We can then calculate the initial ratio of [CH3COO-]/[CH3COOH] as:
[CH3COO-]/[CH3COOH] = 0.50 M / 0.50 M = 1
Next, we need to determine the new concentrations of CH3COOH and CH3COO- after adding 0.0020 mol of HCl. Since the volume of the buffer is 100.0 mL or 0.100 L, the new concentration of CH3COOH ([HA]) can be calculated as:
[HA] = (0.50 M x 0.100 L) - 0.0020 mol = 0.0480 mol
Similarly, the new concentration of CH3COO- ([A-]) can be calculated as:
[A-] = (0.50 M x 0.100 L) + 0.0020 mol = 0.0520 mol
Now, we can calculate the new ratio of [CH3COO-]/[CH3COOH] as:
[CH3COO-]/[CH3COOH] = 0.0520 mol / 0.0480 mol = 1.083
Finally, we can use the Henderson-Hasselbalch equation to calculate the new pH of the buffer as:
pH = pKa + log([A-]/[HA])
pH = 4.74 + log(1.083)
pH = 4.76
For more such questions on pH
https://brainly.com/question/172153
#SPJ11
which reagent is the limiting reactant when 2.24 molmol naohnaoh and 1.20 molmol co2co2 are allowed to react?
When 2.24 mol NaOH and 1.20 mol [tex]CO2[/tex] are allowed to react, NaOH is the limiting reactant.
Let's try to figure out the limiting reactant of the reaction between NaOH and CO2 by using stoichiometry.
Stoichiometry is a branch of chemistry that deals with the calculation of quantities of reactants and products involved in a chemical reaction.
By using stoichiometry, we can calculate the limiting reactant of a reaction, which is the reactant that gets consumed entirely and determines the amount of product formed.
Limiting reactant calculation
[tex]NaOH + CO2 → Na2CO3 + H2O[/tex]
From the balanced chemical equation above, we can see that one mole of NaOH reacts with one mole of CO2 to produce one mole of Na2CO3 and one mole of H2O.
Using the mole ratio, we can calculate the number of moles of Na2CO3 that will be formed from 2.24 mol of NaOH.
[tex]2.24 mol NaOH × 1 mol Na2CO3/1 mol NaOH = 2.24 mol Na2CO3[/tex]
Similarly, we can calculate the number of moles of Na2CO3 that will be formed from 1.20 mol of CO2.1.20 mol CO2 × 1 mol Na2CO3/1 mol CO2 = 1.20 mol Na2CO3
Therefore, NaOH is the limiting reactant because it produces a smaller number of moles of Na2CO3 than CO2. NaOH is the limiting reactant, and we can say that 2.24 mol of NaOH reacts with 1.20 mol of CO2 to form 1.20 mol of Na2CO3.
To know more about limiting reagent refer to-
brainly.com/question/26905271#
#SPJ11
4 (c) Aluminium is produced by electrolysis of a molten mixture of aluminium oxide and cryolite. This is shown in Figure 3.
Name a gas produced at the positive electrode. Gas forms at the positive electrode Aluminium forms at the negative electrode [1 mark]
would a solution of LiF be electrically condition?
A solutions that is highly reactive & consists ions— molecules or atoms that also have received or exchanged electrons—is an electrolyte solution.
Electrically, what charge does an electrolyte solution have?Since the final cost on I equal the net cost on (ii), the electrolytic mixture is always neutral (iii). Unlike with the superconductor, the sodium chloride conducts the electrical charge by virtue of progression of its (iv). The characteristic that causes a metal to prefer to dissolve in positive charge is defined as (v).
Are electrolytes positively charged?Substances known as electrolytes show a natural positive or negative static electricity when submerged in water. Several body activities are supported by them, including controlling nuclear reactions or preserving overall proportion of liquids both inside and outside your cells.
To know more about electrons visit:
https://brainly.com/question/28977387
#SPJ1
when the temperature of ice-cold water is increased slightly, does it undergo a net expansion or a net contraction? group of answer choices neither contraction nor expansion expansion a combination of expansion (due to increased molecular motion) and contraction (due to crystal collapse) leads to a net expansion. contraction
The rate at which the water expands continues to increase until it reaches the freezing temperature of 0°C or 32°F.
When the temperature of ice-cold water is increased slightly, it undergoes a net contraction. In the case of water, the density of water is at a maximum at 4°C or 39°F. This implies that, as the temperature of water decreases, its density will increase until it reaches 4°C. As a result, the water will begin to expand again.
As a result, when the temperature of ice-cold water is increased slightly, it will undergo a net contraction.According to the Density Anomalies of Water experiment, as the temperature of water decreases, its density increases.
Water achieves its maximum density at 4°C or 39°F. When the temperature of water falls below 4°C, the water starts to expand. At this point, the water begins to freeze, causing a further expansion in volume.
To learn more about : temperature
https://brainly.com/question/4735135
#SPJ11
The ph curve ends with a ph of
A. 0-3
B. 4-7
C. 7-10
D. 11-14
magnesium sulfate, , is added to 133 ml of m sodium hydroxide, , until precipitate just forms. how many grams of magnesium sulfate were added? assume that the volume of the solution is not changed significantly by the addition of magnesium sulfate.
In the following chemical reaction, the solution was supplemented with 8.01g of magnesium sulfate.
We must utilize the following chemical formula to determine how magnesium sulfate and sodium hydroxide react to solve this issue:
MgSO4 + 2 NaOH → Mg(OH)2 + Na2SO4
One mole of magnesium sulfate (MgSO4) interacts with two moles of sodium hydroxide (NaOH), resulting in one mole of magnesium hydroxide (Mg(OH)2) and one mole of sodium sulfate, according to the equation (Na2SO4).
We must utilize the solution's concentration and volume to determine how many moles of NaOH are present in the solution:
C = n/V
where n is the number of moles, V is the volume in liters, and C is the concentration in moles per liter.
n(NaOH) = C × V
= 1 mol/L × 0.133 L
= 0.133 mol.
We require half as many moles of MgSO4 as we do of NaOH since their mole ratio is 1:2:
n(MgSO4) = 0.5 × n(NaOH)
= 0.5 × 0.133 mol
= 0.0665 mol
Using its molar mass, we can finally translate the quantity of MgSO4 from moles to grams:
m(MgSO4) = n(MgSO4) × M(MgSO4)
= 0.0665 mol × 120.4 g/mol = 8.01 g
Therefore the solution was supplemented with 8.01g of magnesium sulfate.
To learn more about chemical reactions, refer to:
https://brainly.com/question/11231920
#SPJ4
Find the mass, in grams, of 11.2 L H2 at STP
5.0 L of a gas goes from 1.0 atm to 1.3 atm. Calculate the final volume of this gas.
Answer: The heat capacity of a bomb calorimeter is 500 J°C.
How do i solve this?
90.0 g of ethene is provided, which is more than the 14.025 g needed to react with 1.5 moles of oxygen in this reaction. There will therefore be some ethene left over once the reaction is finished.
What is the energy of C6H12O6 O2 CO2 H2O?In the process of respiration, six oxygen molecules combine with one glucose molecule to generate six carbon dioxide and water molecules. Equation: C6H12O6 + 6O2 6CO2 + 6H2O + Energy can be used to represent the respiration reaction.
To calculate the amount of ethene required to react with 1.5 moles of O2, we can now utilise stoichiometry:
3 moles of oxygen and 1 mole of ethene react.
1.5 moles of oxygen will react with (1/3) x 1.5 moles of ethene = 0.5 moles of ethene
Then, we can figure out how much 0.5 moles of ethene weigh:
m(ethene) = n(ethene) x Molar mass(ethene)
m(ethene) = 0.5 mol x 28.05 g/mol
m(ethene) = 14.025 g
To know more about reaction visit:-
https://brainly.com/question/28984750
#SPJ1
the major source of indoor air pollution in developing countries is group of answer choices lead based paints on furniture and walls. cigarette smoke. synthetic materials in construction of buildings. indoor cooking with biomass as a fuel. release of radon-222 gas.
Indoor cooking with biomass fuel is the major source of indoor air pollution in developing countries, causing health risks.
The significant wellspring of indoor air contamination in emerging nations is indoor cooking with biomass as a fuel. Biomass fills, like wood, charcoal, and creature waste, are regularly utilized for cooking and warming in many non-industrial nations. Be that as it may, consuming these powers delivers a scope of poisons very high, including particulate matter, carbon monoxide, and nitrogen oxides, which can have serious wellbeing impacts.
Toxic paints on furnishings and walls, tobacco smoke, manufactured materials in development of structures, and arrival of radon-222 gas are additionally wellsprings of indoor air contamination, yet they are not as predominant in that frame of mind as indoor cooking with biomass fuel. Resolving this issue through clean cooking arrangements and advancing the utilization of cleaner powers can essentially further develop indoor air quality and decrease wellbeing gambles in these districts.
To learn more about biomass, refer:
https://brainly.com/question/28217240
#SPJ4
which of the following statements about the diels-alder reaction are true? true it is a reaction involving pi-electrons. false it is a reaction favored by entropy considerations. false it is a concerted reaction. false it is a [1 3] cycloaddition. false it is a thermal reaction
The statements about diels alder reaction which are true are given in the explanation part.
The following statements about the Diels-Alder reaction are true:
- True: It is a reaction involving pi-electrons.
- True: It is a concerted reaction, meaning that it occurs in a single step without the formation of reaction intermediates.
- False: It is not necessarily favored by entropy considerations, as the reaction can be endothermic and enthalpy-driven.
- True: It is a [4+2] cycloaddition, meaning that it involves the formation of a 6-membered ring from a 4-carbon diene and a 2-carbon dienophile.
- False: While some Diels-Alder reactions can be thermal, others require specific conditions such as high pressure or the use of a catalyst to occur.
To know more about diels alder reaction go through:-
https://brainly.com/question/21503302
#SPJ4
What is the minimum mass of Mg(NO₃)₂ that must be added to 1.00 L of a 0.560 M HF solution to begin precipitation of MgF₂(s)? For MgF₂, Ksp = 7.4 × 10⁻⁹, and Ka for HF = 7.2 × 10⁻⁴.
the minimum mass of Mg(NO₃)₂ required to begin precipitation of MgF₂ is 6.37 × 10⁻³ g/L.
The balanced equation for the precipitation of MgF₂ from Mg(NO₃)₂ and HF is:
Mg(NO₃)₂ + 2HF → MgF₂(s) + 2HNO₃
The concentration of fluoride ions can be found using the equilibrium expression for the dissociation of HF:
HF + H₂O ⇌ H₃O⁺ + F⁻
Ka = [H₃O⁺][F⁻]/[HF]
Since the initial concentration of HF is 0.560 M, the concentration of [H₃O⁺] is negligible compared to [HF] because HF is a weak acid. Therefore, we can simplify the expression to:
Ka = [F⁻][HF]/[HF] = [F⁻]
[F⁻] = Ka = 7.2 × 10⁻⁴ M
Now we need to determine the minimum amount of Mg(NO₃)₂ required to provide enough fluoride ions to reach the saturation point of MgF₂.
Let's assume x moles of Mg(NO₃)₂ is added to 1.00 L of 0.560 M HF solution. This will result in the addition of 2x moles of F⁻ ions to the solution.
The molar solubility of MgF₂ is equal to the square root of Ksp because the stoichiometric coefficients are 1 for both MgF₂ and Mg(NO₃)₂.
Molar solubility of MgF₂ = sqrt(Ksp) = sqrt(7.4 × 10⁻⁹) = 8.6 × 10⁻⁵ M
To reach saturation, the concentration of F⁻ ions must be equal to the molar solubility of MgF₂. Therefore:
[F⁻] = 8.6 × 10⁻⁵ M = 2x moles/L
x = 4.3 × 10⁻⁵ moles/L
The mass of Mg(NO₃)₂ required is then:
mass = moles × molar mass = (4.3 × 10⁻⁵ mol/L) × (148.3 g/mol) = 6.37 × 10⁻³ g/L.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ1
2. How are the electron arrangements in each pair of elements similar?
b) O and Se
a) Ba and Sr
c) N and As
Both Ba and Sr belong to the same group of elements in the periodic table Oxygen and selenium both belong to group 16 of the periodic table Nitrogen and arsenic belong to the same periodic table group of elements.
How do the electron arrangements of Ba and Sr contribute to their similar chemical properties?Ba and Sr both have two valence electrons in their outermost shell and belong to the same group of elements in the periodic table, the alkaline earth metal group.
This similarity in electron arrangement leads to similar chemical properties.
What is the significance of nitrogen and arsenic belonging to the same group in the periodic table?Nitrogen and arsenic belong to group 15 of the periodic table, also known as the nitrogen group. Both elements have five valence electrons in their outermost shell, and their shared electron arrangement contributes to similar chemical properties such as their ability to form compounds with three other atoms.
To know more about periodic table,visit:
https://brainly.com/question/11155928
#SPJ1
the ksp of agcl is 1.61 x 10-10. what is the solubility of agcl in a solution of 3.42 x 10-4 m srcl2?
The solubility of AgCl in the given solution is 1.26 x 10⁻⁸ M.
The reaction is,
AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)
Ksp = [Ag⁺][Cl⁻] = 1.61 x 10⁻¹⁰
SrCl₂ dissociates as follows:
SrCl₂(s) ⇌ Sr²⁺(aq) + 2Cl⁻(aq)
Since the reaction between AgCl and SrCl₂ does not involve the Sr²⁺ ion, its concentration can be considered constant and omitted from the equilibrium expression.
The solubility of AgCl in a solution of 3.42 x 10⁻⁴ M SrCl₂ is given by the following equation:
Ksp = [Ag⁺][Cl⁻] = x(2x + 3.42 x 10⁻⁴)
where x is the molar solubility of AgCl.
Solving for x,
x = 1.26 x 10⁻⁸ M
To know more about solubility, here
brainly.com/question/28044392
#SPJ4
sample of gas has a volume of 4.25 l at 25.6 oc and 748 mmhg. what will be the volume of this gas at 26.8 oc and 742 mmhg?'
The new volume of the gas at 26.8°C and 742 mmHg is approximately 4.28 L.
To find the new volume of the gas at the given temperature and pressure, we can use the combined gas law formula:
P1 × V1 / T1 = P2 × V2 / T2
where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature in Kelvin, P2 is the final pressure, T2 is the final temperature in Kelvin, and V2 is the final volume.
Convert the temperatures to Kelvin.
T1 = 25.6°C + 273.15 = 298.75 K
T2 = 26.8°C + 273.15 = 299.95 K
Convert the pressures to atm.
P1 = 748 mmHg × (1 atm / 760 mmHg) = 0.98421 atm
P2 = 742 mmHg × (1 atm / 760 mmHg) = 0.97632 atm
Rearrange the combined gas law formula to solve for V2.
V2 = P1 × V1 × T2 / (T1 × P2)
Substitute the given values into the formula.
V2 = (0.98421 atm) × (4.25 L) × (299.95 K) / (298.75 K × 0.97632 atm)
Calculate the final volume, V2.
V2 ≈ 4.28 L
The volume of the gas at 26.8°C and 742 mmHg is approximately 4.28 L.
More on gas volume: https://brainly.com/question/29490815
#SPJ11
3clo4- 2ph33clo3- 2p 3h2o in the above reaction, the oxidation state of chlorine changes from to . how many electrons are transferred in the reaction?
Total 12 electrons are transferred in the reaction.
In the above reaction, the oxidation state of chlorine changes from +7 to +3. To determine the number of electrons transferred, we need to calculate the change in oxidation state of chlorine.
Each chlorate ion (ClO₄⁻) has a charge of -1, and each chlorite ion (ClO₃⁻) has a charge of -1 as well.
The oxidation state of oxygen is -2, so the oxidation state of the four oxygen atoms in the chlorate ion is -8, and the oxidation state of the three oxygen atoms in the chlorite ion is -6.
Let x be the oxidation state of chlorine in the chlorate ion, then we have;
x + 4(-2) = -1
x = +7
Let y be the oxidation state of chlorine in the chlorite ion, then we have;
y + 3(-2) = -1
y = +5
Therefore, each chlorine atom undergoes a reduction of 2 units, which corresponds to the gain of 2 electrons.
Since there are 6 chlorine atoms in total (3 in chlorate and 3 in chlorite), the total number of electrons transferred in the reaction is;
6 x 2 = 12 electrons.
To know more about oxidation state here
https://brainly.com/question/11313964
#SPJ4
if i contain 3 moles of gas in a container with a volume of 60 liters and at a tempurature of 400k what is the pressure indise the container
If I contain 3 moles of gas in a container with a volume of 60 liters and at a temperature of 400 K,The pressure inside the container is approximately 16.42 atm.
Using the Ideal Gas Law, we can calculate the pressure inside the container. The Ideal Gas Law is expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
In this case, you have 3 moles of gas (n = 3), a volume of 60 liters (V = 60 L), and a temperature of 400 K (T = 400 K). The gas constant (R) for this equation is 8.314 J/(mol·K), but since we are using liters and atm, we need to use the value 0.0821 L·atm/(mol· K).
Now, we can plug the values into the equation:
P × 60 L = 3 mol × 0.0821 L·atm/(mol·K) × 400 K
To find the pressure (P), we will rearrange the equation and solve for P:
P = (3 mol × 0.0821 L·atm/(mol·K) × 400 K) / 60 L
P ≈ 16.42 atm
So, the pressure inside the container is approximately 16.42 atm.
Know more about Ideal Gas Law here:
https://brainly.com/question/27870704
#SPJ11
The solubility of a gas is 0.584 g/L at a pressure of 109 kPa. What is the solubility of the gas if the pressure is increased to 85 kPa, given that the temperature is held constant?
Solution.
Henry's law states that the solubility of a gas in liquids at a constant temperature is proportional to its pressure. We write the formula:
�
=
�
×
�
S=K×P
The Henry's constant for each substance is individual, so we express it and find it through the solubility of the gas and its pressure.
�
=
�
�
K=
P
S
�
=
5.58
∗
1
0
−
6
K=5.58∗10
−6
And now we find the solubility of the gas at a different pressure.
S = 1.39 g/L
Answer:
S = 1.39 g/L
2.
Solution.
To begin with, we will translate the pressure from mm Hg of the column and from atmospheres to Pascals.
760 mmHg = 101324.72 Pa
2.5 atm = 253312.5 Pa
�
=
�
×
�
S=K×P
�
=
�
�
K=
P
S
�
=
1.58
∗
1
0
−
5
K=1.58∗10
−5
Now we find the solubility of the gas at a different pressure.
S = 4.00 g/L
Answer:
S = 4.00 g/L
3.
Solution.
To begin with, we will translate the pressure from atmospheres to Pascals.
0.750 atm = 75993.75 Pa
�
=
�
×
�
S=K×P
�
=
�
�
K=
P
S
�
=
3.22
∗
1
0
−
5
K=3.22∗10
−5
Now we find the gas pressure to get a solution with a concentration of 6.25 g / L.
�
=
�
�
P=
K
S
P = 194.1 kPa
Answer:
P = 194.1 kPa
How many grams of O2 are required to react with 15.6 moles of CO2?
Answer: 499.2g of O2
Explanation:CO2 + O2 ---> CO2 +H20
From the equation, we know 1 mole of oxygen requires 1 mole of CO2 to react completely.
Therefore it is sure that 15.6 mole of CO2 requires 15.6 moles of O2
To convert moles of O2 to grams, we need to use the molar mass of O2
i.e. 32.00g/mol
the mass of O2 required is
15.6 moles *32.00 g/mol = 499.2g
part d.3. instead of conc nh, being added to the solution, 6 m naoh is added (both are bases). how will this affect the test for the identification of copper(ii) ion in the solution? explain.
We get the dark blue color precipitate which contains [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution when 6 M Na OH is added.
When the 6M Na OH is used instead of the NH3 in a solution then [tex]Cu^{2+}[/tex]ions will be precipitate out as the [tex]Cu(OH)_{2}[/tex] in the solution. When the NH3 is used the [tex]Cu^{2+}[/tex] ions will form a complex with the NH3 in the solution which can be expressed as,
[tex]Cu^{2+}[/tex] + [tex]4NH_{3}[/tex] ----> [[tex]Cu(NH3)4]^{2+}[/tex] (aq.) + 2[tex]OH^{-}[/tex](aq.)
The complex of the [tex]Cu^{2+}[/tex] is soluble which gives dark blue color to the solution.
Therefore by using the 6 M Na OH we can get the blue precipitate of the [tex]Cu(OH)_{2}[/tex] . Precipitation is defined as the process of transforming a dissolved substance of the solution into an insoluble solid. The solid formed is called the precipitate of the solution.
and by using the NH3 we can get the dark blue color of the solution that contains [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution.
To learn more about Precipitate
https://brainly.com/question/30764379
#SPJ4
The correct question is,
Instead of conc. NH3 being added to the solution, 6 M Na OH is added (both are bases). How will this affect the test for the identification of copper(II) ion in the solution. Explain
describe the basis of using carbon monoxide to quantify pulmonary diffusion capacity describe the assumptions made in this method address each of these assumptions in light of differences in diffusivity of carbon monoxide compared to oxygen and differences in solubilities of these two gases. what role does hemoglobin play in this method?
The pulmonary diffusion capacity of carbon monoxide (DLCO) is used to determine the transfer of gases through the lungs. The amount of carbon monoxide absorbed by hemoglobin in the lungs is measured in this method.
Carbon monoxide has a higher diffusion coefficient than oxygen, and it is 20-30 times more soluble than oxygen. These differences affect the interpretation of DLCO results. Hemoglobin is a molecule that is critical in the transportation of oxygen and carbon monoxide. Hemoglobin is known to bind with carbon monoxide 240 times more readily than oxygen. In this method, hemoglobin plays a critical role. It is assumed that 100 percent of inhaled carbon monoxide is absorbed into the bloodstream and that the hemoglobin-CO complex forms reversible binding without causing an alteration in the blood's oxygenation level.
The DLCO measurement is based on the following assumptions: At sea level, the concentration of carbon monoxide is zero in the blood being analyzed. The solubility of carbon monoxide in blood is 20-30 times greater than that of oxygen, indicating that it is dissolved in the blood more easily. The alveolar-capillary barrier's thickness is consistent throughout the lung's entire surface area. The diffusion capacity is determined solely by the exchange of gases through the alveolar-capillary membrane and the available hemoglobin in the blood.
Learn more about carbon monoxide at brainly.com/question/22530423
#SPJ11
choose the transition state for the following SN2 reaction CI +NaSH ---> SH + NaCI. a) I B) II C) III D) IV
The transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.
Transition state in a chemical reaction can be referred to as a molecular configuration that describes the point of maximum energy in the reaction path during which the bonds that are involved in the chemical reaction are in a state of change.
Transition state theory provides detailed explanations of the reaction rates and reaction mechanisms occurring in the gas phase.
The reaction mechanism in question is a substitution reaction in which the hydroxyl ion attacks the alkyl halide, resulting in the creation of an intermediate complex.
The complex is created in a transition state involving the transfer of a negatively charged ion, which will lead to a new bond forming with the incoming nucleophile.
In conclusion, the transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.
To know more about transition state refer to-
brainly.com/question/30259181#
#SPJ11
the following experiment was carried out using a newly synthesized chlorofluorocarbon. exactly 50 ml of the gas effused through a porous barrier in 157 s. the same volume of argon effused in 76 s under the same conditions. which compound is the chlorofluorocarbon?
The molar mass corresponds to the chlorofluorocarbon CF3Cl (Freon-11), which has a molar mass of 137.37 g/mol. Therefore, the chlorofluorocarbon in the experiment is CF3Cl.
The rate of effusion of a gas through a porous barrier is inversely proportional to the square root of its molar mass. Therefore, we can use the rate of effusion to determine the relative molar mass of the two gases and identify which one is a chlorofluorocarbon.
The rate of effusion can be calculated using Graham's law:
Rate of effusion = Volume of gas / Time taken to effuse
For the chlorofluorocarbon, the rate of effusion is:
Rate of effusion (CFC) = 50 mL / 157 s = 0.3185 mL/s
For argon, the rate of effusion is:
Rate of effusion (Ar) = 50 mL / 76 s = 0.6579 mL/s
Using Graham's law, we can set up the following equation:
Rate of effusion (CFC) / Rate of effusion (Ar) = sqrt(Molar mass (Ar) / Molar mass (CFC))
Solving for the ratio of molar masses:
Molar mass (Ar) / Molar mass (CFC) = (Rate of effusion (Ar) / Rate of effusion (CFC))^2
Molar mass (Ar) / Molar mass (CFC) = (0.6579 mL/s / 0.3185 mL/s)^2
Molar mass (Ar) / Molar mass (CFC) = 4.294
Molar mass (CFC) = Molar mass (Ar) / 4.294
The molar mass of argon is 39.95 g/mol. Therefore, the molar mass of chlorofluorocarbon is:
Molar mass (CFC) = 39.95 g/mol / 4.294 = 9.30 g/mol
To learn more about molar mass
https://brainly.com/question/13152455
#SPJ4
a ground state hydrogen atom absorbs a photon of light having a wavelength of 93.73 nm. 93.73 nm. it then gives off a photon having a wavelength of 1094 nm. 1094 nm. what is the final state of the hydrogen atom? values for physical constants can be found in the chempendix.
The final state of the hydrogen atom is the n=2 energy level.
The initial state of the hydrogen atom is the ground state, where the electron is in the n=1 energy level. When it absorbs a photon of wavelength 93.73 nm, it jumps to a higher energy level. We can calculate the energy of the absorbed photon using the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
E = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s) / (93.73 x 10^-9 m) = 1.653 x 10^-18 J
This energy corresponds to the difference in energy between the ground state and some higher energy level, which we can calculate using the Rydberg equation:
1/λ = R_H(1/n_i^2 - 1/n_f^2)
where λ is the wavelength of the emitted photon, R_H is the Rydberg constant for hydrogen, and n_i and n_f are the initial and final energy levels, respectively. We know λ and R_H, and we can assume n_i = 1, so we can solve for n_f:
1/λ = R_H(1 - 1/n_f^2)
n_f^2 = 1 / (1 - λ/R_H) = 4
n_f = 2
To know more about hydrogen, here
brainly.com/question/28494990
#SPJ4
For the following question, choose TWO answers. Which question should be asked to determine if the reaction supports the Brønsted- Lowry model of acids and bases?
According to the Brønsted-Lowry model, an acid and its conjugate base differ by a single proton, while a base and its conjugate acid differ by the addition of a single proton. If a reaction produces conjugate acid-base pairs, it supports this model.
To determine if the reaction supports the Brønsted-Lowry model of acids and bases, there are several questions that could be asked. Two possible questions are:
1. Does the reaction involve the transfer of protons (H+ ions) from one molecule to another.This is a key concept in the Brønsted-Lowry model, which defines acids as proton donors and bases as proton acceptors. If a reaction involves the transfer of protons, it supports this model.
2. Do the reactants and products contain conjugate acid-base pairs.
for more such questions on Brønsted-Lowry model :
https://brainly.com/question/20308475
#SPJ11
Answer:
1. Did an acid donate a hydrogen ion to become a conjugate base?
2. Did a base accept a hydrogen ion to become a conjugate acid?