what is the conjugate base of ch3nh3 ? group of answer choices ch3nh2 ch3nh3 ch3nh3- ch3nh2- ch3nh2

The following is true of a hydrocarbon is e. All of these

Hydrocarbon compounds are the simplest carbon compounds composed of carbon and hydrogen atoms that can form ring structures, are used as fuel for combustion reactions, and contain double or triple bonds.

The common characteristics of hydrocarbons are that they produce steam, carbon dioxide, and heat during combustion, and oxygen is required for the combustion reactions to occur. This compound is used as a fuel source. In everyday life we encounter many carbonate compounds, such as kerosene, gasoline, natural gas, and plastics. Other types of hydrocarbons such as propane and butane are used in Liquified Petroleum Gas and some materials for making medicine and clothing.

Learn more about hydrogen at:

https://brainly.com/question/29765115

#SPJ11

The most appropriate reagents for the conversion of acetophenone to m-acetylbenzenesulfonic acid are SO3H, O3, H2SO4 and CISO3H. SO3H and O3 act as oxidizing agents, while H2SO4 and CISO3H provide the necessary sulfuric acid functionality.

To begin the reaction, acetophenone is first oxidized by the SO3H reagent. This converts the hydroxy group to a ketone, forming an aldehyde intermediate. Then, the aldehyde intermediate is oxidized by the O3 reagent to the carboxylic acid, forming an enol intermediate. The enol intermediate is then protonated using H2SO4, and the resulting compound is then sulfonated using the CISO3H reagent. This produces m-acetylbenzenesulfonic acid.

This reaction can be used to synthesize m-acetylbenzenesulfonic acid from acetophenone in a reliable and efficient manner.

For more similar questions on acetophenone ,

brainly.com/question/13127397

#SPJ11

When considering the trends in ionization energies, we would expect: potassium to be more reactive than sodium.

This is due to the fact that potassium has a lower ionization energy than sodium. Because potassium is larger and has more electron shielding than sodium, its valence electron is more easily removed. This is the cause of the lower ionization energy for potassium.

The amount of energy required to remove an electron from a neutral atom is referred to as ionization energy. Low ionization energy implies that the element's valence electrons are more readily removed, indicating that it is more reactive. Because potassium has a lower ionization energy than sodium, it is more reactive than sodium.

Taking a closer look at potassium and sodium, we can see that potassium is in group 1 of the periodic table, whereas sodium is in group 2. As we go down a group in the periodic table, ionization energies typically decrease. This is because the number of electron shells increases, making it easier for electrons to be removed.

Potassium, as a result, has a lower ionization energy than sodium, making it more reactive.

To know more about potassium refer here:

https://brainly.com/question/8507057#

#SPJ11

The burning of 1 gram carbohydrate release 16,736 J of heat energy.

Burning a 1 gram carbohydrate sample raised the temperature of the 500 gram water bath by 8°C, to calculate how much heat energy was released by the carbohydrate sample, we can use the specific heat capacity of water which is 4.18 J/g°C.

The heat energy released by the carbohydrate sample can be calculated using the following equation:

Heat energy (J) = mass of water (g) × specific heat capacity of water × ΔTHeat energy

In this case, the calculation is as follows:

Heat energy (J) = 500 g x 8°C x 4.184 = 16,736 J

Therefore, burning a 1 gram carbohydrate sample raised the temperature of the 500 gram water bath by 8°C and released 16,736 J of heat energy.

Learn more about heat energy: https://brainly.com/question/878982

#SPJ11

The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The volume of the solution in milliliters is 69.3 mL.

Since most reactions take place in solutions, it's critical to comprehend how the substance's concentration is expressed in a solution. There are numerous ways to express how many chemicals are in a solution.

The letter M stands for molarity, one of the most often used units of concentration. The number of moles of solute contained in 1 liter of solution is how it is defined.

M = number of moles/volume in L

number of moles = Mass / Molar mass

Molar mass of Cu(NO₃)₂ = 187.55 g/mol

n = 6.55 / 187.55

n = 0.034 mol

0.490 = 0.034 / V

V = 0.0693 L

1 L = 1000 mL

0.0693 L = 69.3 mL

To know more about molarity, visit;

https://brainly.com/question/16587536

#SPJ12

Answer: The Ka of the weak acid with a concentration of 0.058 m and a pH of 1.80 is 0.0016.

The Ka of a weak acid is the product of the concentration of the hydrogen ion and the concentration of the conjugate base, divided by the concentration of the weak acid. The Ka of an unknown weak acid with a concentration of 0.058 m and a pH of 1.80 can be calculated as follows:

Ka = ([H+]*[A-])/[HA]

Ka = (10^(-1.8)*10^(-1.8))/0.058

Ka = 0.0016

Therefore, the Ka of the weak acid with a concentration of 0.058 m and a pH of 1.80 is 0.0016.


Learn more about acids here:

https://brainly.com/question/29796621#


#SPJ11

Magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Option A is the correct choice.

If the surface around a volcano is swelling, it indicates that there is an increase in pressure from magma rising beneath the surface. This is often a sign of increased volcanic activity, which can eventually lead to an eruption. A few centimeters of swelling may not necessarily indicate an imminent eruption, but it does suggest that the magma is becoming more active and may lead to an eruption in the future.

Therefore, the most likely conclusion that the scientist would make based on this data is that magma is becoming more active underneath the volcano, which could lead to an eventual eruption. Therefore, option A is correct.

To know more about magma, here

brainly.com/question/16940653

#SPJ4

The concentration of FeCl₃ is 0.447M.

To calculate this, we must first determine the number of moles of FeCl₃ in the solution. The molar mass of FeCl₃ is 162.2 g/mol, so the number of moles of FeCl₃ is (given weight)/(Molar mass) =0.123 moles.

Next, we need to calculate the total volume of the solution, which is given= 275 mL.

To calculate the concentration, we divide the number of moles of FeCl₃ (0.123 moles) by the total volume of the solution (275 mL). We can then convert mL to L by dividing by 1000, so the total volume of the solution is 0.275 L.

This gives us a concentration of:

Concentration= (No. of moles)/(Volume in L)

=(0.123 moles/0.275 L)

=0.447M

Therefore, The concentration of FeCl₃ in a solution prepared by dissolving 20.0 g of FeCl3 in enough water to make 275 mL of solution is 0.447M.

To know more about  FeCl₃, refer here:

https://brainly.com/question/28299457#

#SPJ11

The given statement "A mole of copper atoms has more atoms than a mole of lead atoms," is false beacuse a  mole of copper atoms and a mole of lead atoms both contain the same number of atoms.

A mole of any substance contains the same number of particles, which is approximately  particles, also known as Avogadro's number. This number is a constant that does not change based on the identity of the substance.

Therefore, a mole of  mole of copper atoms and a mole of lead atoms both contain the same number of atoms, which is approximately  atoms. The mass of a mole of copper atoms and a mole of lead atoms would be different because the atomic mass of copper and lead is different. Copper has an atomic mass of 63.55 g/mol while lead has an atomic mass of 207.2 g/mol.

To learn more about Avogadro's number refer: brainly.com/question/11907018

#SPJ11

Answer:  Distillation is best used for B) separating two miscible liquids and for separating insoluble solids from liquids.

Distillation is a separation method that is best used for separating two miscible liquids, such as water and alcohol. This process is done by heating the mixture until it reaches its boiling point and collecting the vaporized mixture. As the vapor rises, the different components of the mixture separate based on their boiling points.

The vapor is then cooled and condensed back into liquid form, resulting in the two liquids being separated.

It can also be used for separating insoluble solids from liquids. In this case, the mixture is heated until it reaches its boiling point and is then filtered, with the insoluble solid being retained by the filter while the liquid passes through.

Distillation is not suitable for separating soluble solids from liquids, as the solids will remain dissolved in the liquid even when heated to the boiling point. It also is not suitable for separating two or more solids from a mixture, as distillation does not allow for the separation of solids.

Overall, distillation is best used for separating two miscible liquids and for separating insoluble solids from liquids.


Learn more about Distillation here:

https://brainly.com/question/29037176#

#SPJ11

The two primary gases responsible for the

greenhouse effect

are carbon dioxide (CO2) and water vapor (H2O). They absorb infrared energy, which is a type of energy that is emitted from the Earth's surface, and trap it in the atmosphere.

This energy can't escape, which causes the atmosphere to warm up, resulting in the greenhouse effect.

The greenhouse effect is a natural process that helps to keep the Earth's temperature relatively stable, which is important for life.

The amount of CO2 and H2O in the atmosphere are regulated by natural processes, such as respiration and

photosynthesis

,

but human activities, such as burning fossil fuels and deforestation, have caused these levels to increase significantly over the past few decades.

This has resulted in a further increase in the temperature of the atmosphere, leading to climate change.

CO2 absorbs more infrared energy than other gases, but H2O also plays an important role in the greenhouse effect.

H2O exists in the atmosphere in both vapor and liquid forms, and is able to absorb and trap heat energy more effectively than CO2.

H2O also has the ability to reflect incoming sunlight, which further helps to keep the temperature of the atmosphere warm.

CO2 and H2O are the two primary gases responsible for the greenhouse effect because of their ability to absorb infrared energy and trap heat in the atmosphere.

These two gases are essential for regulating the temperature of the Earth and maintaining the climate.

Human activities have caused their levels to increase, resulting in a further increase in the temperature of the atmosphere and leading to climate change.  

to know more about

greenhouse effect

refer here:

https://brainly.com/question/13706708#

#SPJ11

20,908.6 g of precipitate were generated.

Lead (II) nitrate and Potassium iodide react to form Lead (II) iodide and Potassium nitrate.For this reaction, the chemical equation is balanced as follows:

[tex]2 Pb(NO_3)_2 + 2 KI \rightarrow 2 PbI_2 + 2 KNO_3[/tex]

To calculate the amount of precipitate produced, we first need to calculate the amount of moles of Lead (II) nitrate and Potassium iodide.

Amount of Lead (II) nitrate = 626 mL x (0.110 mol/L) = 68.86 mol

Amount of Potassium iodide = 429 mL x (3.4 mol/L) = 1458.6 mol

Since the reaction has a 2:2 mole ratio, the amount of moles of Lead (II) iodide produced is 68.86 mol.

Now, we can calculate the mass of the precipitate produced.

Mass of precipitate = 68.86 mol x (303.4 g/mol) = 20,908.6 g

Therefore, the amount of precipitate produced is 20,908.6 g.

learn more about precipitate Refer:brainly.com/question/30904755

#SPJ1

Solubility: The maximum amount of solute that can be dissolved in a solvent at a given temperature and pressure is called solubility.

Partial Pressure: The pressure that a gas exerts when it is present in a mixture of gases is called partial pressure.

The given solubility of NO in water is 0.090 m and the partial pressure is 0.80 atm. We need to find the partial pressure required for the solubility of NO to be 0.060 m.

Hence, let's find the relationship between solubility and partial pressure.

The relationship between solubility and partial pressure can be given as, Henry's Law:

S = KP

Where, S is the solubility of the gas in solution,

P is the partial pressure of the gas above the solution, and

K is Henry's Law constant.

Let's apply the given values to Henry's Law to find the value of

K.0.090 m = K (0.80 atm)

K = 0.090 m / 0.80 atm

K = 0.1125 m/atm

Now, let's find the partial pressure required for the solubility of NO to be 0.060 m using Henry's Law.

0.060 m = (0.1125 m/atm) P

So, the partial pressure required for the solubility of NO to be 0.060 m is 0.53 atm.

Learn more about solubility: https://brainly.com/question/9098308

#SPJ11

Answer: I have selected the gemstone turquoise from the United States. Turquoise is a semi-precious gemstone composed of copper aluminum phosphate. It is found in the deserts of Nevada, Arizona, Colorado, and New Mexico. Turquoise has a long history of use, with some pieces found in Ancient Egyptian tombs and Native American jewelry. Turquoise is still used today for making jewelry, figurines, and inlays for furniture. It is also often used to decorate clothes and other items.

Turquoise is created through the process of sedimentary precipitation, which involves the accumulation of minerals in slow-moving water. This process takes thousands of years, and is further shaped by the elements, such as air and water, which break down the mineral and change its color. It can also be artificially altered to improve its color.

In everyday life, turquoise is primarily used for jewelry, but it is also thought to possess healing properties. In some cultures, turquoise is believed to bring good luck and is used to ward off evil spirits. Turquoise has been a popular choice for making jewelry and decorative objects since ancient times. It is a beautiful, vibrant gemstone with a wide range of colors and patterns, which makes it a highly sought after material.

Learn more about minerals here:

https://brainly.com/question/18078524#

#SPJ11

Answer:
To calculate the number of atoms of H and C in 0.160 mol of C6H14O, we need to first determine the number of moles of each element present in C6H14O.

The molecular formula of C6H14O shows that there are 6 carbon atoms, 14 hydrogen atoms, and 1 oxygen atom in each molecule of C6H14O.

The molar mass of C6H14O can be calculated as:

Molar mass of C6H14O = (6 × atomic mass of C) + (14 × atomic mass of H) + (1 × atomic mass of O)

= (6 × 12.01 g/mol) + (14 × 1.01 g/mol) + (1 × 16.00 g/mol)

= 86.18 g/mol

Therefore, 0.160 mol of C6H14O has a mass of:

Mass = molar mass × number of moles

= 86.18 g/mol × 0.160 mol

= 13.79 g

Now we can calculate the number of atoms of H and C in 0.160 mol of C6H14O.

Number of atoms of H:

Number of moles of H = 14 × 0.160 mol = 2.24 mol

Number of atoms of H = 2.24 mol × Avogadro's number

= 2.24 mol × 6.022 × 10^23/mol

= 1.35 × 10^24 atoms of H

Therefore, there are 1.35 × 10^24 atoms of hydrogen in 0.160 mol of C6H14O.

Number of atoms of C:

Number of moles of C = 6 × 0.160 mol = 0.96 mol

Number of atoms of C = 0.96 mol × Avogadro's number

= 0.96 mol × 6.022 × 10^23/mol

= 5.78 × 10^23 atoms of C

Therefore, there are 5.78 × 10^23 atoms of carbon in 0.160 mol of C6H14O.

Explanation:

The pH of the solution is 9.95.

The reaction that explains this is given as NH4+ + OH- → NH3 + H2O

The pH of a solution with equal amounts of NH4Cl and NH3 is 12.21.

To solve this problem, we need to first write out the balanced chemical equation for the reaction between NH4Cl and NH3:

NH4Cl + NH3 ⇌ NH4+ + NH2Cl

Next, we need to write out the equilibrium expression:

Kb = [NH4+][OH-]/[NH3]

Since we are given the concentration of NH4Cl and NH3, we can use the initial concentrations to calculate the equilibrium concentrations of NH4+, NH2Cl, and NH3:

[NH4+] = 0.1 M × (0.1 L / 0.18 L) = 0.056 M

[NH2Cl] = 0.056 M

[NH3] = 0.2 M × (0.08 L / 0.18 L) = 0.089 M

Using the equilibrium expression and the value of Kb, we can solve for the concentration of hydroxide ions:

Kb = [NH4+][OH-]/[NH3]

1.79 × 10^-5 = (0.056 M)(x) / (0.089 M)

x = 1.13 × 10^-5 M

Finally, we can use the concentration of hydroxide ions to calculate the pH of the solution:

pH = 14 - pOH = 14 - (-log10(1.13 × 10^-5)) = 9.95

Therefore, the pH of the solution is 9.95.

If some NaOH is added to the solution but the pH barely changes, it means that the added NaOH is being neutralized by the NH4+ ions in the solution, forming more NH3 and water:

NH4+ + OH- → NH3 + H2O

This reaction helps to buffer the pH of the solution.

To calculate the pH of a solution with equal amounts of NH4Cl and NH3, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where A- is the conjugate base of the acid, NH4+, and HA is the acid, NH3.

The pKa of NH4+ is given by:

pKa = pKw - pKb = 14 - 1.79 = 12.21

At the halfway point, the concentration of NH4+ and NH3 are equal:

[NH4+] = [NH3]

Substituting these values into the Henderson-Hasselbalch equation, we get:

pH = 12.21 + log(1) = 12.21

Therefore, the pH of a solution with equal amounts of NH4Cl and NH3 is 12.21.

Learn more about pH values here https://brainly.com/question/172153

#SPJ1

The amino acid will travel 32.9 mm on the chromatography strip whose retention factor (Rf) = 0.50.

The Rf (Retention Factor) value of an amino acid is a measure of its distance traveled on a chromatography strip compared to the distance traveled by the solvent.

To calculate the distance traveled, we use the formula:

Rf = distance traveled by the amino acid/distance traveled by the solvent.

In this case, the Rf value is 0.50 and the distance traveled by the solvent is 65.8 mm.

Therefore, the distance traveled by the amino acid is 0.50 x 65.8 mm = 32.9 mm.

It is important to remember that Rf values are relative, meaning that a higher Rf value represents a higher distance traveled compared to the solvent. In this case, since the RF value is 0.50, the amino acid traveled a lower distance than the solvent.

In conclusion, the amino acid will travel 32.9 mm (0.50 x 65.8 mm) on the chromatography strip where the solvent traveled 65.8 mm and the Rf is 0.50.

To know more about retention factors, refer here:

https://brainly.com/question/23286912#

#SPJ11

Molality is used as a concentration scale in this experiment instead of molarity because it is not affected by temperature changes.

Molarity is a measure of the number of moles of a substance dissolved in a liter of solution, and its value can vary with temperature changes. On the other hand, molality is a measure of the number of moles of solute per kilogram of solvent and is not affected by temperature changes. This makes it a better choice of concentration scale in experiments where temperature fluctuations could otherwise affect the accuracy of results.

In this experiment, molality is used to ensure accurate results. By using molality instead of molarity, the experimenter is able to account for temperature changes that could affect the outcome of the experiment, resulting in a more reliable and accurate set of results.

Thus, Molality is used as a concentration scale in this experiment instead of molarity to avoid temperature-related discrepancies.

To know more about Molality, refer here:

https://brainly.com/question/26921570#

#SPJ11

The pressure of the dry gas alone can be calculated using the ideal gas law: PV = nRT and the pressure is  736.2 torr.

The pressure of dry gas alone is 736.2 torr. Step-by-step explanation: Given that, the Volume of oxygen gas = 250 ml. Temperature = 25 oC Pressure = 760 torr, Vapor pressure of water at 25 oC = 23.8 torrTo find: The pressure of the dry gas alone.

Formula used,V2 = (P1 - P2) * (V1 - Vw) / P2Where,V2 = Volume of gas aloneP1 = Pressure of gas collectedP2 = Vapor pressure of water at temperature T1V1 = Volume of gas collected Vw = Volume of water vapor formedCalculation,P1 = 760 torrP2 = 23.8 torrV1 = 250 mlVw = V1 * P2 / P1= 250 * 23.8 / 760= 7.84 mlV2 = (P1 - P2) * (V1 - Vw) / P2= (760 - 23.8) * (250 - 7.84) / 760= 231.82 mlPressure of dry gas alone = P1 * V2 / V1= 760 * 231.82 / 250= 736.2 torr.

Hence, the pressure of the dry gas alone is 736.2 torr.

Read more about torr:

https://brainly.com/question/14797048

#SPJ11

The amount of sugar that you would need to add to 110 ml of water to create a 173 mM solution is 1.17986 grams.

In chemistry, molarity is a measure of the concentration of a solute in a solution. Molarity is usually expressed in moles per liter (M) and is the number of moles of a solute present in a liter of solution. The molarity of a solution is calculated by dividing the number of moles (n) of a solute by the volume (v) of the solution.
M = n/v

When a solution is created, the amount of solute required is determined by the desired molarity of the solution. For instance, if you wanted to create a 173 mM solution, you would need to know the molecular weight (MW) of the solute and the volume of the solution.
n = mass/MW

Combining the two equations, we can solve for the mass using the equation:

mass = n(MW) = M(v)(MW)

Plugging in the values, we get:

Amount of sugar = 173 mM(110 mL)(62 g/mol)

Amount of sugar = 173 x 10⁻³ M(110 mL)(62 g/mol)(1L/1000mL)

Amount of sugar = 1.17986 grams

Therefore, adding 1.17986 grams of sugar to 110 mL of water will create a 173 mM solution.

Learn more about molarity here: https://brainly.com/question/14469428.

#SPJ11

The concentration required for the same osmotic pressure is 0.019 molL⁻¹.

The osmotic pressure of an aqueous solution is determined by the concentration of the solute particles present in the solution. To create an aqueous solution of Ca(NO₃)₂ with the same osmotic pressure as 3.08m KCl (1.36 atm), we must first determine the molarity of the solution.

The osmotic pressure can be calculated using the Van 't Hoff equation:

Osmotic Pressure (Π) = iMRT

where i is the Van 't Hoff factor (3 for Ca(NO₃)₂, as it dissociates into 3 ions), M is the molarity of the solution, R is the ideal gas constant (0.0821 L•atm•mol-1•K-1), and T is the absolute temperature (in Kelvin).

Thus, we can rearrange the equation to solve for M:

M = Π/(iRT).

Plugging in the values for Π (1.36 atm), i (3), R (0.0821 L•atm•mol⁻¹•K⁻¹), and T (298K), we get:

M = 1.36/(3*0.0821*298)

M = 0.019 molL⁻¹.

Thus, 0.019 molL⁻¹ is the molarity of the Ca(NO₃)₂ solution that would be necessary to create an aqueous solution with the same osmotic pressure of 1.36 atm as the 3.08m KCl solution.

To know more about osmotic pressure, refer here:

https://brainly.com/question/29823250#

#SPJ11

The value of the gas constant, R, in units of L atm/mol K is 0.0821 L atm/mol K.

The ideal gas law is described by the ideal gas equation,

PV = nRT,

which expresses the relationship between pressure, volume, temperature, and the number of moles of gas.

The gas constant, R, is a constant that relates these variables for a given quantity of an ideal gas at constant pressure and volume. Its value depends on the units used to express pressure, volume, temperature, and the number of moles of gas.

For the most common units, R has a value of 0.0821 L atm/mol K. This is equivalent to 8.31 J/mol K or 1.99 cal/mol K. The value of R is often used in solving problems involving the ideal gas law, such as determining the pressure, volume, or temperature of a gas sample under different conditions.

To learn more about gas refer: https://brainly.com/question/30859506

#SPJ11

True. The localized concentration of base from the droplet is higher than the rest of the solution, which is why the indicator turns pink. This phenomenon is known as titration.

Titration or volumetric analysis is a quantitative analytical method used to determine the concentration of a solution of an unknown substance by reacting it with a solution of a known concentration.

Titration includes a controlled reaction between the solution to be tested (the analyte) and the standard solution, which is the titrant. The titrant is typically used to measure the concentration of acids and bases in a sample of a solution.

In a titration, the base or the acid is slowly added to the unknown acid or base, the two are then reacted to form water and salt. The indicator is colorless or a pale color when the titrant is added to the unknown solution.

As the reaction between the titrant and the unknown solution proceeds, the titrant is added dropwise.

If the indicator is added too soon or too much, the solution turns dark pink, as the concentration of the base from the droplet is higher than the rest of the solution.

Learn more about Titration here:

https://brainly.com/question/186765

#SPJ11

The variables that must remain constant to maintain an equilibrium constant and equilibrium position are concentration, temperature, and pressure.

What is equilibrium constant?

Equilibrium constant (Kc) is defined as the ratio of the products of the concentrations of the products of a chemical reaction to the products of the concentrations of the reactants, each raised to their stoichiometric coefficients.

The term ‘equilibrium’ refers to a condition where the concentrations of the reactants and products in a reversible reaction are constant over time.

Identify the variables that must remain constant to maintain an equilibrium constant and equilibrium position

The variables that must remain constant to maintain an equilibrium constant and equilibrium position are given below:

Concentration Temperature Pressure

The variables that do not need to remain constant are color and size.

To learn more about equilibrium constant, visit:

https://brainly.com/question/24175270

#SPJ11

The four traditional meteorological seasons, which are based on the annual temperature cycle and the location of the Earth in its orbit around the sun, split the year into four seasons of three months each. The following describes these seasons:

Here are two reasons why meteorological seasons were needed:

Consistency: Based on the annual temperature cycle, meteorological seasons offer a consistent method of dividing the year into four separate times. This makes it simple to compare weather patterns from one year to the next and to monitor long-term weather pattern changes over time.

Ease of communication: By dividing the year into four seasons based on set calendrer months, it is simpler for people to discuss the weather and make appropriate plans for their daily activities. Because January falls within the winter season according to the meteorological calendar, it is simple to know what kind of weather to anticipate when someone states, "I'm going skiing in January."

Learn more about meteorological ,

https://brainly.com/question/14243944

#SPJ4

For the incomplete Reaction (below), the mass and charge of the missing product are 0 and -1. The missing product is a beta particle where a neutron in the carbon nucleus split into a proton and an electron that was released.

Beta particle emission, also known as beta decay, is a type of radioactive decay in which a beta particle is emitted from the nucleus of an atom.

A beta particle is a high-energy, high-speed electron or positron that is released from the nucleus as a result of the transformation of a neutron into a proton or a proton into a neutron.

Learn more about beta particles at: https://brainly.com/question/24312947

#SPJ1

Answer:

Explanation:

I think 'The heat from Earth's core causes material in the area under the crust to become denser and rinse, while less dense material sinks.

Answer:

The net ionic equation for the neutralization reaction of any strong acid with any strong base is always the same because both the strong acid and the strong base completely dissociate in water into their respective ions, and the reaction between them always results in the formation of water and a salt.

For example, when hydrochloric acid (HCl) is neutralized by sodium hydroxide (NaOH), the following reaction occurs:

HCl (aq) + NaOH (aq) → NaCl (aq) + H2O (l)

In this reaction, both HCl and NaOH completely dissociate into their respective ions in water:

HCl (aq) → H+ (aq) + Cl- (aq)

NaOH (aq) → Na+ (aq) + OH- (aq)

The net ionic equation for this reaction is:

H+ (aq) + OH- (aq) → H2O (l)

As you can see, the net ionic equation is the same for any strong acid and any strong base, since the reaction always involves the combination of H+ and OH- ions to form water. The identity of the cations and anions in the salt formed will vary depending on the specific acid and base used, but the overall reaction and the resulting net ionic equation will always be the same.

Mark me as brainliest!

The pH of the buffer solution is approximately 8.95.

To find the pH of the buffer solution, we'll use the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])
Here, [A-] is the concentration of NH3 (base), and [HA] is the concentration of NH4+ (conjugate acid). First, we need to find the pKa of NH4+. The pKa is the negative logarithm of the Ka (acid dissociation constant) value. For NH4+, the Ka value is 5.56 x 10^-10.
Step 1: Find pKa
pKa = -log(Ka) = -log(5.56 x 10^-10) = 9.25
Step 2: Find the concentration of NH3 and NH4+
[NH3] = 0.20 mol / 1.00 L = 0.20 M
[NH4+] = 0.40 mol / 1.00 L = 0.40 M
Step 3: Use the Henderson-Hasselbalch equation
pH = 9.25 + log(0.20/0.40) = 9.25 - 0.301 = 8.949

For more question on buffer solution click on

https://brainly.com/question/27371101

#SPJ11

The acid dissociation constant (Ka) for an acid that when dissolved at a concentration of 0.1M gives a pH of 3.12 is: 4.48x10^-4.

The acid dissociation constant (Ka) for an acid that when dissolved at a concentration of 0.1M gives a pH of 3.12 can be calculated using the equation Ka = 10^-pH. In this case, Ka = 10^-3.12 = 4.48x10^-4.

Acid dissociation occurs when an acid donates a proton (H+) to a base, such as water. The Ka value is the equilibrium constant for this reaction and indicates the acid's strength. A higher Ka value indicates a stronger acid.

When an acid is dissolved in water, the concentration of hydrogen ions (H+) increases and affects the pH of the solution. The pH of a solution is determined by the concentration of hydrogen ions. The pH is calculated as the negative logarithm of the hydrogen ion concentration. When the concentration of H+ is 0.1M, the pH is 3.12, and Ka is 4.48x10^-4.

In conclusion, the acid dissociation constant (Ka) for an acid that when dissolved at a concentration of 0.1M gives a pH of 3.12 is 4.48x10^-4.

To know more about dissociation refer here:

https://brainly.com/question/20430933#

#SPJ11