Ferns, club mosses, and horsetails are all vascular plants that reproduce by producing spores, and they share the following two characteristics:
Vascular tissue: These plants have specialized tissues for conducting water and nutrients throughout the plant. The vascular tissue is composed of xylem, which transports water and minerals from the roots to the rest of the plant, and phloem, which transports organic nutrients (such as sugars) from the leaves to the rest of the plant.
Spore production: These plants reproduce by producing spores, which are haploid (having one set of chromosomes) and can grow into new plants under favorable conditions.
In contrast, mosses are non-vascular plants that lack specialized tissues for conducting water and nutrients. Instead, they absorb water and nutrients directly from their surroundings through their leaves. Mosses also reproduce by producing spores, but they have a much simpler structure than ferns, club mosses, and horsetails. Mosses lack true roots, stems, and leaves, and they do not have a well-developed system for conducting water and nutrients throughout the plant.
To know more about minerals please refer:
https://brainly.com/question/5099156
#SPJ1
GEN CHEM 2 PLEASE HELP
H2]eq = 1.1 × 10^−4 M.
How did we arrive at the value?The given equilibrium reaction is:
2H₂S(g) ⇌ 2H₂(g) + S₂(g)
The equilibrium constant, Kc, for the reaction at 700 °C is 9.0 × 10^−8.
We are given the initial number of moles of H2S as 0.700 moles in a 0.500 L flask. Let's assume that x moles of H2S is consumed at equilibrium, and therefore the equilibrium concentrations of H2 and S2 are both 2x, based on the stoichiometry of the reaction.
The expression for the equilibrium constant, Kc, is:
Kc = [H2]^2[S2]/[H2S]^2
At equilibrium, the concentration of H₂S will be (0.700 - x)/0.500 M, and the concentration of H₂ and S₂ will be 2x/0.500 M. Substituting these values in the expression for Kc and solving for x gives:
9.0 × 10^−8 = (2x/0.500 M)^2 / ((0.700 - x)/0.500 M)^2
Solving for x gives x = 5.6 × 10^−5 M.
Therefore, the equilibrium concentrations of H₂ and S₂ are both 2x = 1.1 × 10^−4 M, and the equilibrium concentration of H₂S is (0.700 - x)/0.500 M = 0.699 M.
Thus, the concentration of H2 at equilibrium is 1.1 × 10^−4 M, rounded to the correct number of significant figures.
Therefore, [H2]eq = 1.1 × 10^−4 M.
learn more about equilibrium reaction: https://brainly.com/question/18849238
#SPJ1
in this experiment, you will be heating under reflux. what glassware equipment do you need to set up the apparatus? distillation head, fractionating column, round-bottom flask distillation head, condenser, round-bottom flask round-bottom flask, condenser, drying tube separatory funnel, erlenmeyer flask, beaker
When heating under reflux, you will need the following glassware equipment to set up the apparatus: Round bottom flask, condenser, hot plate, thermometer, adapter, clamps and stands, water supply.
When heating under reflux, you will need the following glassware equipment to set up the apparatus:
1. Round-bottom flask: This is the flask that contains the reaction mixture that needs to be heated.
2. Condenser: This is a glass tube that is attached to the round-bottom flask and has a water jacket around it. The water is circulated through the jacket to cool down the hot vapours and condense them back into liquid form.
3. Heating mantle or hot plate: This is the equipment that provides heat to the round-bottom flask.
4. Thermometer: This is an instrument used to measure the temperature of the reaction mixture.
5. Adapter: This is a glassware piece that connects the condenser to the round-bottom flask.
6. Clamps and stands: These are used to hold the glassware in place during the heating process.
7. Water supply: This is required to run water through the condenser's jacket to cool down the vapours.
To know more about glassware equipments go through:-
https://brainly.com/question/30244991
#SPJ4
50cm³ of carbon(iv)oxide was exploded with 150cm³ of air containing 20% oxygen by volume.which of the reactant was in excess
Explanation:
V(CO) = 50 cm^3 = 50 ml = 0.05 l
V(air) = 150 cm^3 = 150 ml = 0.15 l
V(O2)/V(air) = 20%
_____________________________
2 CO + O2 = 2CO2
n(CO) = V(CO)/V(M) = 0.05/22.4 = 0.0022mol
V(O2)/V(air) = x/150 x=150×0.2 =30 ml=0.03l
n(O2) = V(O2)/V(M) =0.03/22.4 = 0.0013 mol
From the reaction ratio n(CO): n(O2) = 2:1
For explosing 0.0022 mol CO need 0.0011 mol O2. We have 0.0013 mol O2, then , 0.0003 mol O2 is excess.
Answer: O2 was in excess
a compressed gas cylinder contains argon gas. the pressure inside the cylinder is psi (pounds per square inch) at a temperature of . how much gas remains in the cylinder if the pressure is decreased to psi at a temperature of ?
we can use the ideal gas law: PV = nRT where P is the pressure of the gas in pounds per square inch (psi), V is the volume of the gas in cubic inches (in^3), n is the number of moles of gas,
R is the gas constant (which is 10.73 psi·in^3/mol·K for argon), and T is the temperature of the gas in Kelvin (K).
Since we are only interested in the change in the amount of gas, we can assume that the volume of the cylinder remains constant. Therefore, we can write:
n1 = (P1 V) / (R T1)
where n1 is the initial number of moles of gas, P1 is the initial pressure of the gas, V is the volume of the gas (which we assume remains constant), R is the gas constant for argon, and T1 is the initial temperature of the gas.
To find the final number of moles of gas, we can use the same equation with the final pressure and temperature:
n2 = (P2 V) / (R T2)
where n2 is the final number of moles of gas, P2 is the final pressure of the gas, and T2 is the final temperature of the gas.
To find the change in the amount of gas, we can subtract n2 from n1:
Δn = n2 - n1 = (P2 V) / (R T2) - (P1 V) / (R T1)
Substituting the given values, we get:
Δn = [(14 psi) × V] / [(10.73 psi·in^3/mol·K) × (273 K)] - [(10 psi) × V] / [(10.73 psi·in^3/mol·K) × (300 K)]
Simplifying this expression, we get:
Δn = (4 psi × V) / (3483.9 psi·in^3/mol)
where we have converted the temperatures to Kelvin.
To find the mass of argon that remains in the cylinder, we can use the molar mass of argon, which is 39.95 g/mol. The mass of argon in the cylinder is:
m = n1 × 39.95 g/mol
Substituting n1 from the first equation, we get:
m = [(P1 V) / (R T1)] × 39.95 g/mol
To find the final mass of argon, we can use the same equation with the final number of moles:
m' = [(P2 V) / (R T2)] × 39.95 g/mol
To find the change in mass, we can subtract m' from m:
Δm = m' - m = [(P2 V) / (R T2)] × 39.95 g/mol - [(P1 V) / (R T1)] × 39.95 g/mol
Substituting the given values and simplifying, we get:
Δm = (4 psi × V) / 87.67 g
Therefore, the change in mass of argon in the cylinder is:
Δm = (4 psi × V) / 87.67 g
Note that the result depends on the volume of the cylinder, which is not given in the problem.
To know more about gas click here
brainly.com/question/14812509
#SPJ4
7-13 if the bod5 of two wastes having k values of 0.0800 d^-1 and 0.120 d^-1 is 280.0 ml/l, what would be the ultimate bod for each?
The ultimate BOD (BODu) is the BOD remaining after a long period of incubation (usually 20 days). The BOD of a waste can be modelled using the following equation:
BODt = BODu ( 1 - e^(-kt) )
where BODt is the BOD at time t, BODu is the ultimate BOD, k is the rate constant, and e is the base of the natural logarithm.
We can use the given k values and BOD5 to solve for the ultimate BOD for each waste.
For waste 1 (k = 0.0800 d^-1):
BOD5 = BODu ( 1 - e^(-k5) )
280.0 ml/L = BODu ( 1 - e^(-0.08005) )
280.0 ml/L = BODu ( 1 - e^(-0.4) )
280.0 ml/L = BODu ( 0.3297 )
BODu = 851.4 ml/L
Therefore, the ultimate BOD for waste 1 is 851.4 ml/L.
For waste 2 (k = 0.1200 d^-1):
BOD5 = BODu ( 1 - e^(-k5) )
280.0 ml/L = BODu ( 1 - e^(-0.12005) )
280.0 ml/L = BODu ( 1 - e^(-0.6) )
280.0 ml/L = BODu ( 0.4457 )
BODu = 628.4 ml/L
Therefore, the ultimate BOD for waste 2 is 628.4 ml/L.
To know more about BOD, visit the link given below:
https://brainly.com/question/31109333
#SPJ4
2. Use Data Table 1 to answer the following: In a paragraph, describe the relationship of how the salinity and temperature will change the density of water in the tropical ocean. Use specific data to support your answer.
The density of a ocean water rises as the temperature falls. As a result, it water gets colder the denser it is. As salinity grows, seawater's density rises as well.
What connection exists between ocean density, temperature, and salinity?As the salinity rises, the density of the water rises. At all temperatures just above freezing point, seawater with a salinity more than 24.7 becomes denser as the temperature drops. Pressure increases cause seawater's density to rise.
What connection exists between the water's salinity and temperature?Fresh water is introduced into the sea as a result of rising surface temperatures, melting ice, and increased precipitation, which reduces salinity. Seawater with a lower salinity has a lower density so won't sink as far as water with a higher density. Ocean currents are modified by this process.
To know more about colder visit:
https://brainly.com/question/11211564
#SPJ1
is reaction 1 exothermic under standard conditions? a) yes, because heat must be added to initiate the reaction b) yes, because the standard enthalpy change is negative c) no, because the percent yield of nh3 is greatest at high pressure d) no, because the standard enthalpy change is negative
D) is reaction 1 exothermic under standard conditions? "no, because the standard enthalpy change is negative. "
When a reaction is exothermic, it releases heat as it proceeds. In this case, the given question is asking if Reaction 1 is exothermic under standard conditions.
The answer is no, because the standard enthalpy change is negative.A negative standard enthalpy change means that the reaction is endothermic, not exothermic. Endothermic reactions absorb heat from the surroundings as they proceed. Therefore, heat is not released and added to the system,
which rules out option a). The percent yield of NH₃ being greatest at high pressure, as stated in option c), is not relevant to whether the reaction is exothermic or endothermic.
For more such questions on exothermic
brainly.com/question/14221476
#SPJ11
THIS IS FOR BOTANY ZOOLOGY (please help)
A brief explanation of bilateral, radial, and asymmetric can be found below.
Definition of zoological termsBilateral, radial, and asymmetric are terms used in zoology to describe the symmetry of an animal's body.
Bilateral symmetry refers to an animal's body being divided into two equal and opposite halves along a central axis. This type of symmetry is common in animals with a distinct head and tail end, such as humans.
Radial symmetry refers to an animal's body being arranged in a circular or radial pattern around a central axis. This type of symmetry is common in animals such as jellyfish, where the body parts are arranged around a central mouth.
Asymmetric refers to an animal that lacks any kind of symmetry. This type of body plan is uncommon in animals, but is seen in some types of sponges and other primitive organisms.
More on zoology can be found here: https://brainly.com/question/15970176
#SPJ1
What is the outcome of a catalyst as a result of its involvement in a chemical reaction?
It is consumed and slows down a reaction.
It is consumed and speeds up a reaction.
It is not consumed and slows down a reaction.
It is not consumed and speeds up a reaction.
It is not consumed and speeds up a reaction.
What is Catalyst?
A catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It works by lowering the activation energy required for the reaction to occur, which allows the reaction to proceed more quickly and with less energy input. Catalysts can be used in a wide range of industrial processes, from the production of chemicals and fuels to the manufacture of pharmaceuticals and food products.
A catalyst is a substance that speeds up a chemical reaction without being consumed in the process. Catalysts work by lowering the activation energy required for a reaction to occur, which allows the reaction to proceed at a faster rate.
Learn more about Catalyst from the given link
https://brainly.com/question/21598276
#SPJ1
According to the text, how do humans impact the population growth of other ecosystems? Select all that apply.
Damming rivers
Spreading disease
Starting droughts
Clearing forests
Clearing forests.
According to the text, humans impact the population growth of other ecosystems by clearing forests.
This is because forests are important habitats for many different species, and when they are destroyed or degraded, those species are forced to relocate or die off.
Additionally, forests are also important carbon sinks, which means they help to absorb and store carbon from the atmosphere. When forests are cleared, that carbon is released back into the atmosphere, contributing to climate change.
Therefore, forest clearing by humans can have significant impacts on the population growth of other ecosystems
Learn more about Clearing forests here:
https://brainly.com/question/15336761
#SPJ1
For many purposes we can treat nitrogen as an ideal gas at temperatures above its boiling point of -196 degrees Celsius.Suppose the temperature of a sample of nitrogen gas is lowered from 19.0 degrees Celsius to -14.0 degrees Celsius, and at the same time the pressure is changed. If the initial pressure was 0.76 kPa and the volume increased by 35.0% what is the final pressure? Round your answer to the correct number of significant digits.
0.56 kPa is the final pressure.
The final pressure can be calculated using the ideal gas law equation, PV = nRT.
We know the initial pressure (P1) and initial volume (V1), the change in temperature (ΔT), and the change in volume (ΔV).
The number of moles (n) is not given, but can be calculated using the equation PV = nRT, where R is the ideal gas constant (8.314 J/molK).
[tex]n = \frac{P_1V_1 }{ RT_1}\\\\n=\frac{ (0.76 kPa)(V_1) }{ (8.314 J/molK)(19.0 + 273.15)}\\\\n = 0.039 moles[/tex]
Therefore, the final pressure (P2) can be calculated using the equation PV = nRT, where T2 is the final temperature in Kelvin and V2 is final volume.
[tex]P_2 =\frac{ nRT_2 }{ V_2}[/tex]
[tex]P_2 =\frac{ (0.039 moles)(8.314 J/molK)(-14.0 + 273.15) }{ (V_1 + \Delta V)}\\\\P_2 = 0.56 kPa[/tex]
Therefore, the final pressure is 0.56 kPa.
leran more about final pressure Refer:brainly.com/question/29283195
#SPJ1
the reaction between solid sodium and iron iii oxide is one in a series of reactions that inflates an automobile airbag. as a single replacement reaction and a redox reaction
The reaction between solid sodium and iron III oxide is:
2 Na(s) + Fe2O3(s) → 2 NaFeO2(s) + 1/2 O2(g).
Sodium is a chemical element with the symbol Na and atomic number 11. It is a soft, silvery-white metal that belongs to the alkali metal group in the periodic table. Sodium is highly reactive, particularly in the presence of water, and is never found free in nature. It was first isolated by Sir Humphry Davy in 1807 using electrolysis. Sodium is an essential element for all living organisms, and it plays a crucial role in various physiological processes, including fluid balance, nerve impulse transmission, and muscle function. Sodium is also widely used in the production of many industrial chemicals, including sodium hydroxide (caustic soda), sodium carbonate (washing soda), and sodium bicarbonate (baking soda). Sodium compounds are also used in the manufacturing of soaps, detergents, paper, and textiles. However, excessive sodium intake can lead to health problems such as high blood pressure and cardiovascular diseases.
Learn more about sodium here:
https://brainly.com/question/18723610
#SPJ1
Calculate the energy required to melt 5.8 g of ice at 0 oC.
The molar heat of fusion for ice is 6.02 kJ/mol.
The energy required to melt 5.8 g of ice at 0°C is 1.94 kJ.
What is Energy?
Energy is the capacity of a physical system to do work or produce heat. It is a scalar physical quantity that is often associated with the ability of a system to cause changes in other physical systems or to do work on them. Energy exists in various forms, such as kinetic energy, potential energy, thermal energy, chemical energy, nuclear energy, and electromagnetic energy, and can be transformed from one form to another.
First, we need to calculate the number of moles of ice:
n = m/M
where n is the number of moles, m is the mass of ice, and M is the molar mass of ice.
Molar mass of H2O = 18.015 g/mol
n = 5.8 g / 18.015 g/mol
n = 0.322 mol
Next, we can calculate the energy required to melt the ice using the molar heat of fusion:
q = nΔHf
where q is the energy required, n is the number of moles of ice, and ΔHf is the molar heat of fusion.
ΔHf for ice = 6.02 kJ/mol
q = 0.322 mol x 6.02 kJ/mol
q = 1.94 kJ
Learn more about Energy from the given link
https://brainly.com/question/13881533
#SPJ1
which statement is true about the electrons in the bohr model of an atom?responsesthey exist at specific energy levels.they exist at specific energy levels.they give off energy as they jump to a higher level.they give off energy as they jump to a higher level.they cannot move from one orbital to another.they cannot move from one orbital to another.they are equally close to the nucleus.they are equally close to the nucleus.
In the Bohr model of an atom, the true statement about electrons is that they exist at specific energy levels.
This model, proposed by Niels Bohr in 1913, describes electrons as occupying distinct energy levels or shells around the nucleus of an atom. These energy levels are quantized, meaning that electrons can only exist in specific, discrete orbits with fixed energies.
When electrons absorb energy, they can move to a higher energy level or shell, which is called an excited state. Conversely, when they release energy, they return to a lower energy level, known as the ground state. This process is called an electron transition. However, the statement that electrons give off energy as they jump to a higher level is incorrect, as they actually absorb energy when moving to higher energy levels and release energy when returning to lower energy levels.
The statement that electrons cannot move from one orbital to another is also incorrect, as electrons can move between energy levels through the process of absorption or emission of energy, as mentioned above.
Lastly, the claim that electrons are equally close to the nucleus is incorrect. In the Bohr model, electrons in higher energy levels are generally further away from the nucleus than those in lower energy levels. This is because each successive energy level has a larger radius, allowing electrons to be found at various distances from the nucleus depending on their energy level.
Know more about Bohr model here :
brainly.com/question/28825274
#SPJ11
Sulfur Dioxide (SO^2) emissions from smokestacks are reduced by a scrubbing mechanism in which SO^2 gas reacts with crushed limestone (CaCO) to produce removable solid waste. The quation for the balanced reaction can be found below. How many grams of CaCO, are needed to completely react with 1250 g of SO^2
3906.114 grams of CaCO₃ is required to completely react with 1250 grams of SO₂.
What is Scrubbing mechanism?Scrubbing mechanism is a method of removing pollutants, such as sulfur dioxide (SO₂), from industrial exhaust gases. In this mechanism, a substance, such as limestone or lime, is added to the exhaust gases, which react with the pollutants to form solid waste products that can be easily removed.
Equation:The balanced chemical equation for the reaction of SO₂ gas and CaCO₃ is:
SO₂ + CaCO₃ → CaSO₃ + CO₂
From the equation, we can see that one mole of SO₂ reacts with one mole of CaCO₃. Therefore, we need to first determine the number of moles of SO₂ in 1250 g of SO₂:
molar mass of SO₂ = 32.066 g/mol
moles of SO₂ = mass of SO₂ / molar mass of SO₂
moles of SO₂ = 1250 g / 32.066 g/mol
moles of SO₂ = 39.012 mol
Since one mole of SO₂ reacts with one mole of CaCO₃, we need 39.012 moles of CaCO₃ to react with the 39.012 moles of SO₂. The molar mass of CaCO₃ is 100.086 g/mol, so we can calculate the mass of CaCO₃ needed as:
mass of CaCO₃ = moles of CaCO3₃ × molar mass of CaCO₃
mass of CaCO₃ = 39.012 mol × 100.086 g/mol
mass of CaCO₃ = 3906.114 g
Therefore, we need 3906.114 grams of CaCO₃ to completely react with 1250 grams of SO₂.
To know more about scrubbing mechanism, click here
https://brainly.com/question/30207790
#SPJ1
solid aluminum reacts with hydrochloric acid to form aluminum chloride and hydrogen gas. how many liters of hydrogen gas would be produced by the complete reaction of 2.93 g of aluminum at stp?
Also, the conversion informs us that one mole at STP contains 22.4 litres of hydrogen. Hence, 2.93 g of aluminium would completely react at stp to form hydrogen gas, or 22.4 * 2.93 = 65.632.
What happens when aluminium is exposed to acids?Alkalis and acids both cause aluminium to react. It creates hydrogen gas and aluminium chloride when it interacts with an acid. It creates hydrogen gas and aluminium hydroxide when it interacts with an alkali.
How can I calculate the amount of hydrogen gas present at STP?We are aware that one mole of the any petrol takes up 22.4 litres at STP. This implies that at STP, one mole or hydrogen also takes up 22.4 litres of space. Hence, at STP, 10moles or hydrogen gas will take up =22.410=224litres of space.
To know more about mole visit:
https://brainly.com/question/26416088
#SPJ1
a piece of magnesium reacts with 5.98 l of a 2.88 m solution of hydrochloric acid. how many grams of magnesium chloride will be formed?
A piece of magnesium with 8.63 mol of magnesium will react with 17.26 mol of HCl to form 820.9 g of magnesium chloride, given the reaction Mg + 2HCl → MgCl2 + H2.
The fair substance condition for the response among magnesium and hydrochloric corrosive is Mg + 2HCl → MgCl2 + H2. From the situation, it tends to be seen that one mole of magnesium responds with two moles of hydrochloric corrosive to shape one mole of magnesium chloride. To decide the quantity of moles of hydrochloric corrosive present in the arrangement, we can utilize the condition: Molarity = moles/volume.
Thusly, moles of HCl = Molarity × volume = 2.88 mol/L × 5.98 L = 17.26 mol. Since two moles of HCl respond with one mole of magnesium to shape one mole of magnesium chloride, the quantity of moles of magnesium utilized in the response is around 50% of the quantity of moles of hydrochloric corrosive, i.e., 17.26/2 = 8.63 mol. At long last, we can utilize the molar mass of magnesium chloride (95.21 g/mol) to work out the mass of magnesium chloride shaped: Mass of MgCl2 = 8.63 mol × 95.21 g/mol = 820.9 g. Accordingly, 820.9 g of magnesium chloride will be shaped.
To learn more about reactions, refer:
https://brainly.com/question/5425816
#SPJ4
sodium phosphate is added to a solution that contains 0.0076 m aluminum nitrate and 0.047 m calcium chloride. the concentration of the first ion to precipitate (either al3 or ca2 ) decreases as its precipitate forms. what is the concentration of this ion when the second ion begins to precipitate? answer:
When sodium phosphate is added to a solution containing 0.0076 M aluminium nitrate and 0.047 M calcium chloride, the concentration of the second ion begins to precipitate is 6.87 x 10⁻⁸ M.
The concentration of this ion when the second ion begins to precipitate is determined by comparing their solubility products (Ksp) and using the ion product (IP) concept.
For aluminum phosphate (AlPO₄): Ksp = 9.84 x 10⁻²¹For calcium phosphate (Ca₃(PO₄)₂): Ksp = 2.07 x 10⁻³³First, determine which ion will precipitate first by comparing the ion product (IP) to the solubility product (Ksp) for each compound. The ion with the higher IP/Ksp ratio will precipitate first.
IP(AlPO₄) / Ksp(AlPO₄) = [Al₃+][PO4³⁻] / (9.84 x 10⁻²¹)
IP(Ca₃(PO₄)₂) / Ksp(Ca₃(PO₄)₂) = [Ca²⁺]³[PO₄³⁻]² / (2.07 x 10⁻³³)
Since the IP/Ksp ratio for aluminium phosphate is larger than that for calcium phosphate, Al³⁺ will precipitate first as AlPO₄.
Next, find the concentration of Al³⁺ when Ca²⁺ begins to precipitate. At this point, the IP for Ca₃(PO₄)₂ will equal its Ksp.
Ksp(Ca₃(PO₄)₂) = = [Ca²⁺]³[PO₄³⁻]²
2.07 x 10⁻³³ = (0.047)³[PO₄³⁻]²
Solve for PO₄³⁻, then use the IP equation for AlPO₄:
9.84 x 10⁻²¹ = [Al³⁺][PO₄³⁻]
Finally, solve for the concentration of Al³⁺ when Ca²⁺ begins to precipitate. The concentration of Al³⁺ when the second ion (Ca²⁺) begins to precipitate is approximately 6.87 x 10⁻⁸ M.
Learn more about ions; https://brainly.com/question/14190265
#SPJ11
What gas must be present for burning to happen?
Answer:
oxygen should be present for burning to happen,
in a reaction, there are multiple ways to discuss the amount of compound produced. identify the definition of each term related to the reaction yield. the calculated amount of product under ideal conditions choose... the amount of product experimentally produced choose... the comparison of the experimental amount of product to the calculated amount choose...
In a reaction, there are multiple ways to discuss the amount of compound produced, the definition of each term related to the reaction yield. The calculated amount of product under ideal conditions is theoretical yield, the amount of product experimentally produced is actual yield, the comparison of the experimental amount of product to the calculated amount is the percent yield
In a reaction, there are multiple ways to discuss the amount of compound produced, the definition of each term related to the reaction yield is are 1. The calculated amount of product under ideal conditions is theoretical yield, the calculated amount of product under ideal conditions. The theoretical yield is calculated using stoichiometry or by utilizing the balanced equation. 2. The amount of product experimentally produced is actual yield, the amount of product experimentally produced. Actual yield is determined by performing a chemical reaction in a laboratory, measuring the mass of the products, and calculating the amount of products produced.
3. The comparison of the experimental amount of product to the calculated amount is the percent yield compares the experimental amount of product to the calculated amount. The percent yield is calculated using the following formula: percent yield = (actual yield / theoretical yield) x 100%Thus, these are the definitions of each term related to the reaction yield. So therefore the answer are theoretical yield, actual yield, and the percent yield.
Learn more about actual yield at:
https://brainly.com/question/14408642
#SPJ11
what are the products of the citric acid cycle (krebs cycle, tricarboxylic acid [tca] cycle)?
The citric acid cycle is also called the Krebs cycle or tricarboxylic acid (TCA) cycle. In this cycle, a series of chemical reactions that take place in living organisms' cells generate energy through oxidation of acetate derivatives.
The citric acid cycle has eight stages, and the products are as follows: Carbon dioxide (CO2), which is a byproduct of the conversion of pyruvate to acetyl-CoA, NADH (Nicotinamide Adenine Dinucleotide) and FADH2 (Flavin Adenine Dinucleotide), which are coenzymes involved in the oxidation of the acetyl-CoA, ATP (Adenosine Triphosphate), which is produced by substrate-level phosphorylation when the phosphate group is transferred from GTP to ADP, and Water (H2O), which is generated during the transfer of electrons from FADH2 to O2.
The citric acid cycle is an energy-producing cycle in cells that operates through oxidation of acetate derivatives. In this cycle, a series of chemical reactions that take place in living organisms' cells generate energy. The cycle happens in the matrix of the mitochondria in eukaryotic cells and in the cytoplasm of prokaryotic cells.
The citric acid cycle has eight stages, and each stage has a specific enzyme that catalyzes the reaction that converts one molecule to another. The cycle is a central metabolic pathway of aerobic organisms, and it is involved in various metabolic pathways.
To know more about citric acid cycle refer to-
brainly.com/question/29857075#
#SPJ11
if 50.0 ml of 0.60 m hcl is added to 25.0 ml of 0.60 m naoh, what will be the ph of the resulting solution? your answer should be rounded to two decimal places.
The pH of the resulting solution is 7.00.
When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Additionally, answers should be concise and not provide extraneous amounts of detail. Any typos or irrelevant parts of the question should be ignored.
In this case, the student question is:If 50.0 mL of 0.60 M HCl is added to 25.0 mL of 0.60 M NaOH, what will be the pH of the resulting solution? Your answer should be rounded to two decimal places.
To answer this question, it is important to first understand what happens when HCl and NaOH react. HCl is an acid, and NaOH is a base. When they react, they undergo a neutralization reaction in which the acid and base neutralize each other, producing water and a salt.
In this case, the salt produced will be sodium chloride (NaCl).The equation for this neutralization reaction is:
HCl + NaOH → NaCl + H2OWhen HCl and NaOH react, the H+ ions from HCl combine with the OH- ions from NaOH to produce water. The remaining ions (Na+ and Cl-) combine to form the salt NaCl. Because H+ ions are consumed in the reaction, the resulting solution will have a higher pH than the original HCl solution.
To calculate the pH of the resulting solution, we need to know the concentration of H+ ions in the solution. We can calculate this by using the equation for the ionization of water:
Kw = [H+][OH-]where Kw is the ion product constant for water (1.0 × 10^-14 at 25°C).At 25°C, the concentration of OH- ions in pure water is 1.0 × 10^-7 M. Because the solution resulting from the neutralization reaction will be a salt solution, we can assume that the concentration of OH- ions in the solution will be negligible.
Therefore, we can simplify the equation to:
[H+] = Kw/[OH-]
= 1.0 × 10^-14/1.0 × 10^-7
= 1.0 × 10^-7 MWe can use the concentration of H+ ions to calculate the pH of the solution:
pH = -log[H+]
= -log(1.0 × 10^-7)
= 7.00 (rounded to two decimal places)
To learn more about : solution
https://brainly.com/question/25326161
#SPJ11
which one of the following is characteristic of a base? group of answer choices has a slippery, soapy feel produces h3o in water is insoluble in water has a sour taste turns blue litmus red
A base is a type of chemical compound that is characterized by the fact that it has a slippery, soapy feel when touched. The correct option is (a).
The slippery, soapy feel is one of the most distinguishing characteristics of a base, and it is due to the fact that bases are able to react with fats and oils on the skin, creating soap-like substances that feel slippery and greasy to the touch.
Bases are also known for their ability to turn red litmus to blue, which is another common characteristic. This is due to the fact that bases are capable of producing hydroxide ions ([tex]OH^{-}[/tex]) when they are dissolved in water.
These hydroxide ions are basic in nature, and they are able to neutralize any acidic substances that they come into contact with. As a result, when blue litmus paper treated with an acidic substance will turn red when it comes into contact with a base.
Acidic substances, on the other hand, produce [tex]H^{+}[/tex] ions when they are dissolved in water. These ions are able to neutralize any basic substances that they come into contact with, and as a result, they will turn litmus paper red.
Overall, bases are a very important class of chemical compounds that are used in a wide range of industrial, scientific, and medical applications.
The complete question is,
which one of the following is characteristic of a base? explain in 200 words.
a. has a slippery, soapy feel
b. produces [tex]H_{3}O[/tex] in water
c. is insoluble in water
d. has a sour taste turns blue litmus red
Learn more about basic substances here:
brainly.com/question/23082305
#SPJ11
Esterification of propane 1,2,3-triol and unsaturated higher carboxylic acids will produce
Propan-1-ol and ethanoate are esterified Ethanoic acid and propan-1-ol combine to generate an ester. Propan-1-ol and strong acid acid ethyl ester are two isomers that make up this ester.
What byproducts of esterification are there?Esterification is a chemical reaction that produces at least one ester molecule by reacting a lactic substances (RCOOH) with such an ethanol (ROH) to create an ether (RCOOR) and water.
How is esterification rate determined?Up to around 1 moldm3, redox reactions are linked to [H+] concentration. The third kinetic equation controls with a forward reaction rate at constant [H+] concentration. where kH is the constant of proportionality of ester hydrolysis and kE is a rate constant for esterification.
To know more about Ethanoic acid visit :
https://brainly.com/question/28166727
#SPJ9
which of the following is an example of a secondary pollutant? (a) aerosols (b) vocs (c) photochemical oxidants (d) dust from soil erosion
An example of a secondary pollutant is option (c)- photochemical oxidants.
Secondary pollutants are formed when primary pollutants react with each other or with other substances in the atmosphere. Photochemical oxidants, such as ozone, are created through reactions involving sunlight and primary pollutants like VOCs (volatile organic compounds) and nitrogen oxides.
Hence, an example of a secondary pollutant is option (c)- photochemical oxidants.
To know more about Secondary pollutants, refer here:
https://brainly.com/question/12806508#
#SPJ11
potassium fluoride is added to water at a temperature of 298 k. if the initial concentration of that potassium fluoride in water is 0.251 m, then what is the ph of this solution? facts you may need: kw
The pH of the solution is 3.53 when potassium fluoride is added to water at a temperature of 298 k.
How to determine pH ?
Fluoride ion (F-) and then convert it to the dissociation constant (Ka) of its conjugate acid (HF) using the relationship:
Kw = Ka x Kb
where Kw is the ion product constant for water (1.0 x 10⁻¹⁴ at 298 K).
The Kb of fluoride ion is 1.5 x 10⁻¹¹ at 298 K. Therefore, the Ka of HF is:
Ka = Kw / Kb = (1.0 x 10⁻¹⁴) / (1.5 x 10⁻¹¹) = 6.67 x 10⁻⁴
The dissociation of HF in water is:
HF + H2O ⇌ H3O+ + F-
The equilibrium constant expression for this reaction is:
Ka = [H3O+][F-] / [HF]
At equilibrium, the concentration of HF will be equal to the initial concentration of KF, since KF is a salt of HF. Let x be the concentration of F- and [HF] = 0.251 M.
Then,
Ka = [H3O+][F-] / [HF]
6.67 x 10⁻⁴ = x² / 0.251
x = 1.13 x 10⁻³ M
The concentration of H3O+ can be calculated using the equilibrium constant expression:
Ka = [H3O+][F-] / [HF]
6.67 x 10⁻⁴ = [H3O+](1.13 x 10⁻³) / 0.251
[H3O+] = 2.95 x 10⁻⁴ M
Therefore, the pH of the solution is:
pH = -log[H3O+]
pH = -log(2.95 x 10⁻⁴)
pH = 3.53
Thus, the pH of the solution is 3.53.
Learn more about pH
brainly.com/question/15289741
#SPJ11
lucas adds 10g of table salt and 20g of sand to 50 g of distilled water the mixture is then stirred for 1 hour which technique will allow lucas to separate the mixture
The filtration technique can be used by Lucan to separate the mixture.
Filtering is a physical separation procedure that uses a filter media with a complicated structure that only allows fluid to flow through it to separate solid particles and liquid from a combination. Filtrate is the term for the fluid that passes through large solid particles that cannot pass through the filter medium.
The procedure for utilizing filtration to separate the mixture is as follows:
Filter paper should be placed in a funnel and wetted with distilled water.Put a beaker on top of the funnel.Through the filter paper, pour the salt, sand, and water combination.Although the salt and water flow through and are collected in the beaker, the sand will be held on the filter paper.Lucas can use the evaporation method to separate the salt and water. A flame may be used to heat the beaker containing the saltwater solution, which will cause the water to evaporate and leave the salt behind.To learn more about filtration, refer to:
https://brainly.com/question/29756050
#SPJ4
ammonium hydroxide is a weak base because . group of answer choices it is only slightly soluble in water it forms a dilute solution it dissociates only slightly in water it is completely ionized in aqueous solution is a poor acceptor of protons
Ammonium hydroxide is a weak base because c. it dissociates only slightly in water.
When dissolved in water, ammonium hydroxide donates a proton to form the ammonium ion and hydroxide ion. However, this reaction is only partially reversible because the ammonium ion is not a strong enough acid to accept a proton and regenerate the ammonium hydroxide. Therefore, the hydroxide ion concentration in the solution is relatively low, making it a weak base. In chemistry, a substance is referred to as a base if it has the ability to accept protons (H+ ions).
Ammonium hydroxide is a weak base because, when dissolved in water, it donates a proton to form the ammonium ion (NH4+) and hydroxide ion (OH−). This reaction is reversible, as represented by the chemical equation below: NH4+ (aq) + OH− (aq) ⇌ NH3 (aq) + H2O (l)However, this reaction is only partially reversible because the ammonium ion is not a strong enough acid to accept a proton and regenerate the ammonium hydroxide. Therefore, the hydroxide ion concentration in the solution is relatively low, making it a weak base.
Learn more about ammonium hydroxide at:
https://brainly.com/question/22547992
#SPJ11
you have a 250ml sample of 1.09 molarity acetic acid assuming no volume change how much naoh must be added in order to make the best buffer
We need to add 10.90 g of NaOH to the 250 ml sample of 1.09 molarity acetic acid to make the best buffer.
To make the best buffer from a 250 ml sample of 1.09 molarity acetic acid, we need to find out how much NaOH must be added. The Henderson-Hasselbalch equation, which relates the pH of a buffer to its pKa and the ratio of its weak acid to weak base forms.pH = pKa + log([A-]/[HA])In this case, we are dealing with an acetic acid buffer, which has a pKa of 4.76.
We are given a 250 ml sample of 1.09 molarity acetic acid. The molar mass of acetic acid is 60.05 g/mol. Therefore, the number of moles of acetic acid in the sample is:n(acetic acid) = M(acetic acid) x V(acetic acid)n(acetic acid) = 1.09 mol/L x 0.250 Ln(acetic acid) = 0.2725 molNext, we need to find out the amount of NaOH we need to add to make the buffer.
This is a bit tricky because we are given the volume of the acetic acid solution, but not the volume of the final buffer. We also don't know the concentration of the NaOH solution. However, we can use the fact that the buffer is prepared by mixing a weak acid with its conjugate base. Therefore, we can assume that the final buffer will have approximately equal concentrations of acetic acid and acetate ions, which means we need to add an equal amount of NaOH to convert half of the acetic acid to acetate ions.
The balanced chemical equation for the neutralization reaction is:CH3COOH + NaOH → CH3COONa + H2OThe stoichiometry of the reaction is 1:1, which means we need to add an equal number of moles of NaOH to neutralize the acetic acid.n(NaOH) = n(acetic acid) = 0.2725 molNow we need to find out how much NaOH that is in grams.
We can use the molar mass of NaOH to convert from moles to grams.m(NaOH) = n(NaOH) x M(NaOH)m(NaOH) = 0.2725 mol x 40.00 g/molm(NaOH) = 10.90 gTherefore, we need to add 10.90 g of NaOH to the 250 ml sample of 1.09 molarity acetic acid to make the best buffer.
To know more about molarity refer to-
brainly.com/question/8732513#
#SPJ11
What is the scientific term used for the chemical reaction when a fuel burns?
Answer:combustion
Explanation:combustion, a chemical reaction between substances, usually including oxygen and usually accompanied by the generation of heat and light in the form of flame.
Answer:
The scientific term used for the chemical reaction when a fuel burns is combustion.