use maxwell relations to show how the enthalpy of an ideal gas changes with volume held at constant temperature. show your work

At ambient temperature, O₂ molecules move at speeds ranging from 484 to 517 m/s, with 482 m/s being the RMS speed. This is the speed that is most likely to occur.

To calculate the most probable speed, average speed, and root mean square (RMS) speed for oxygen (O₂) molecules at room temperature, we can use the following equations:

Most probable speed:

vp = (2kT / πm)¹/²

where vp is the most probable speed, k is Boltzmann's constant (1.38 x 10⁻²³ J/K), T is the temperature in Kelvin (298 K for room temperature), and m is the mass of a single O2 molecule (32 g/mol or 5.31 x 10⁻²⁶ kg).

Plugging in the values, we get:

vp = (2 x 1.38 x 10⁻²³ J/K x 298 K / π x 5.31 x 10⁻²⁶ kg)¹/²

vp = 484 m/s

vavg = (8kT / πm)¹/²

where vavg is the average speed.

Plugging in the values, we get:

vavg = (8 x 1.38 x 10⁻²³ J/K x 298 K / π x 5.31 x 10⁻²⁶ kg)¹/²

vavg = 517 m/s

Root mean square (RMS) speed:

vrms = (3kT / m)¹/²

where vrms is the RMS speed.

Plugging in the values, we get:

vrms = (3 x 1.38 x 10⁻²³ J/K x 298 K / 5.31 x 10⁻²⁶ kg)¹/²

vrms = 482 m/s.

Therefore, the most probable speed for O2 molecules at room temperature is approximately 484 m/s, the average speed is approximately 517 m/s, and the RMS speed is approximately 482 m/s.

To learn more about most probable speed refer to:

brainly.com/question/29840755

#SPJ4

Answer:

The oxidation of an aldehyde can be achieved using a variety of oxidizing agents, including potassium permanganate (KMnO4), chromium trioxide (CrO3), and silver oxide (Ag2O). The specific oxidizing agent used will depend on the conditions and desired yield.

For example, if we want to prepare acetic acid, we can oxidize ethanol (an alcohol) using a strong oxidizing agent like potassium permanganate. Alternatively, we can oxidize acetaldehyde (an aldehyde) using a milder oxidizing agent like silver oxide.

Therefore, any aldehyde can be used to prepare a carboxylic acid by oxidation, but the specific oxidizing agent and reaction conditions may vary depending on the aldehyde and desired yield.

The aldehyde that is need for the preparation of the acid is CH3(CH2)8CH(Cl)CHO

It is not possible to directly prepare an acid from an aldehyde as an aldehyde is already an oxidized form of a primary alcohol, which can be further oxidized to form a carboxylic acid.

Aldehydes can be oxidized to carboxylic acids using strong oxidizing agents such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). The reaction conditions need to be carefully controlled to avoid over-oxidation of the aldehyde to carbon dioxide.

Learn more about aldehyde:https://brainly.com/question/30665943

#SPJ1

Homogeneous equilibrium: an equilibrium involving reactants and products in the same phase.  

Heterogeneous equilibrium: an equilibrium involving a catalyst in a different phase as the other species.  

Le Chatelier's Principle: if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state.

The reaction proceeds in the direction that-at least partially-offsets the change in conditions. Complex ion: a metal ion bonded to Lewis acids or Lewis bases.

Homogeneous equilibrium occurs when the reactants and products of a reaction exist in the same phase, either solid, liquid, or gas. Heterogeneous equilibrium happens when the reactants and products are in different phases.

Le Chatelier's Principle states that if a chemical reaction is subjected to a change in conditions, the reaction will adjust towards a new equilibrium state in a way that offsets the change in conditions.

A complex ion is a metal ion bonded to Lewis acids or Lewis bases, which are molecules or ions with an extra pair of electrons that can be donated to other molecules or ions.

To know more about Le Chatelier's Principle click on below link:

https://brainly.com/question/29009512#

#SPJ11

The statement that is correct about activation energy is that it is low for reactions that take place rapidly.

Activation energy refers to the least amount of energy needed for a reaction to take place. It is the amount of energy required to form an activated complex that breaks the bonds of reactants to form products.The significance of activation energy is that it provides information about the speed of chemical reactions. Reactions with high activation energy are slow, whereas those with low activation energy are rapid. The activation energy also determines the effectiveness of catalysts, which are substances that lower the activation energy of a reaction, allowing it to proceed more rapidly.

The Arrhenius equation is a mathematical equation that shows the dependence of reaction rate on temperature. The equation is expressed as:

[tex]k=Ae^{{\frac {-E_{a}}{RT}}}[/tex]

Where: k is the rate constant of the reaction, A is the frequency factor (a constant that depends on the reaction), Ea is the activation energy of the reaction, R is the gas constant, T is the temperature.

For more such questions on activation energy , Visit:

https://brainly.com/question/26724488

#SPJ11

The concentration of caffeine in the solution is 55.55 mm. To calculate this, we need to use the formula for molarity: molarity = (moles of solute) / (liters of solution). In this case, we have 25.0 grams of caffeine (C8H10N4O2), which is equal to 0.015 moles (using the molar mass of caffeine). We also have a total solution volume of 0.450 liters. Plugging this into the equation above gives us molarity = (0.015 moles of solute) / (0.450 liters of solution), which simplifies to 55.55 mm.

In terms of explanation, molarity is a unit of concentration that measures the number of moles of a given solute present in one liter of solution. The equation for molarity is simple and straightforward: molarity = (moles of solute) / (liters of solution). In order to calculate the molarity of the given solution, we first need to calculate the number of moles of caffeine in the solution, which is done by multiplying the mass of caffeine (25.0 grams) by the molar mass of caffeine (194.19 g/mol).

Then, we plug this number and the volume of the solution (0.450 liters) into the molarity equation to get the concentration of caffeine in the solution.

Overall, the concentration of caffeine in the solution is 55.55 mm.

To know more about caffeine refer here:

https://brainly.com/question/9255669#

#SPJ11

The pH of the solution is determined by using the equation mentioned : pH = - log[H+]Where, [H+] = 10^-pH Given the question, the solution has 2.3 x 10^-4 moles of NaOH and 4.5 x 10^-6 moles of HBr in 1 L of water. In order to find the pH of the solution, first, we need to determine the number of moles of H+ ions available in the solution.

Moles of H+ ions = Moles of HBr + Moles of NaOH - Moles of OH-Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - (2 x 2.3 x 10^-4)Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - 4.6 x 10^-4Moles of H+ ions = 1.85 x 10^-4 pH = -log[H+]pH = -log[1.85 x 10^-4]pH = 3.73 (approx)Therefore, the pH of the solution is 3.73 (approx).

The solution has 2.3 x 10^-4 moles of NaOH and 4.5 x 10^-6 moles of HBr in 1 L of water. In order to find the pH of the solution, first, we need to determine the number of moles of H+ ions available in the solution. Moles of H+ ions = Moles of HBr + Moles of NaOH - Moles of OH-Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - (2 x 2.3 x 10^-4)Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - 4.6 x 10^-4Moles of H+ ions = 1.85 x 10^-4.

To know more about Solution  refer here:

https://brainly.com/question/30620786#

#SPJ11

Hydrogen gas and oxygen gas are produced at the cathode and anode, respectively when a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes.

When a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, the following reaction takes place:

2H₂O(l) + 2e- ⟶  H₂(g) + 2OH⁻(aq)

Na₂SO4 (solute) dissociates into ions, i.e., Na+ and SO₄²⁻ in the solution.

When the current is passed through this solution, the positively charged sodium ions migrate towards the negative electrode, i.e., the cathode, whereas the negatively charged sulfate ions migrate towards the positive electrode, i.e., the anode.

At the cathode, the hydrogen ion accepts electrons from the cathode and reduces to hydrogen gas. At the anode, the sulfate ion releases electrons to the anode and oxidizes to form oxygen gas.

The following are the balanced equations for these reactions:

2H⁺(aq) + 2e⁻ ⟶ H₂(g)

SO₄²⁻(aq) ⟶ O₂(g) + 4e⁻

Phenolphthalein is a pH indicator, and its color changes from colorless to pink as the pH increases above 8.2. When Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, the solution initially turns pink at the anode because OH⁻ ions are produced in excess, which increases the pH beyond 8.2.

However, at the cathode, the concentration of OH⁻ ions decreases as they react with the H+ ions to form water molecules. As a result, the solution around the cathode becomes acidic, and the pink color of phenolphthalein fades away.

Therefore, when a solution of Na₂SO4 containing several drops of phenolphthalein is electrolyzed between Pt electrodes, hydrogen gas, and oxygen gas are produced at the cathode and anode, respectively. The pink color of phenolphthalein fades away at the cathode due to the decrease in OH- concentration.

To know more about Hydrogen, refer here:

https://brainly.com/question/29765115#

#SPJ11

The mass (in grams) of chlorine present in 400 mL of seawater, given that the density of seawater is 1.025 g/cm3, is 0.008 grams

We'll begin by obtaining the mass of the sea water. Details below:

Density = mass / volume

Cross multiply

Mass = Density × Volume

Mass of sea water = 1.025  × 0.4

Mass of sea water = 0.41 g

Finally, we shall determine the mass of chlorine in the sea water. Details below:

Mass of chlorine = Percentage × Mass of sea water

Mass of chlorine = 1.94% × 0.41

Mass of chlorine = 0.008 grams

Thus, the mass of chlorine is 0.008 grams

Learn more about mass:

https://brainly.com/question/1674804

#SPJ1

A desulfurization reaction is a type of hydrogenation reaction, where sulfur atoms in a compound are replaced by hydrogen atoms. In a desulfurization reaction, a thioacetal is treated with Raney nickel, resulting in the conversion of the thioacetal to an alkane.

Desulfurization reactions are a type of chemical reaction that involves the conversion of a thioacetal to an alkane by treating the thioacetal with raney nickel. During the reaction, the sulfur atoms of the thioacetal are replaced by hydrogen atoms.

Desulfurization is the process of converting sulfur-containing chemicals into non-sulfur containing substances by means of a chemical reaction. It is applied in refineries and in the petrochemical industry to lower sulfur emissions. Sulfur emissions contribute to acid rain and other environmental problems.

Therefore, desulfurization is an essential process for reducing pollution caused by sulfur dioxide emissions. In conclusion, desulfurization reactions are a type of chemical reaction that involves the replacement of sulfur atoms with hydrogen atoms. They are used in the petrochemical industry to reduce sulfur emissions and prevent environmental pollution caused by acid rain and other environmental problems.

For more such questions on hydrogenation , Visit:

https://brainly.com/question/12833896

#SPJ11

In air, green light has a wavelength of 530 nm and impacted on emerald with a coefficient of refraction of 1.59.

The duration of a periodic wave is the distance over which the wave's form repeats in physics.  It is the distance between two successive matching places of the same phase on the wave, such as two neighbouring crests, troughs, or zero crossings, and it is a feature of both moving and standing waves, as well as other spatial wave patterns.

The spatial frequency is the opposite of the spectrum. The Greek symbol lambda () is frequently used to represent wavelength. In the case of a sinusoidal wave travelling at a constant speed, wavelength is inversely proportionate to frequency: waves with higher frequencies have shorter wavelengths, and waves with lower frequencies have longer wavelengths.

Learn more about   wavelength

https://brainly.com/question/13533093

#SPJ1

During glycolysis and the citric acid cycle, electrons are passed from organic molecules to a molecule of NAD⁺ and FAD⁺ that results in the formation of ATP.

ATP (Adenosine triphosphate) is an organic molecule that is considered a main source of energy for many metabolic processes and is synthesized during cellular respiration by breaking down organic molecules.ATP synthase plays a significant role in the production of ATP.

ATP synthase is an enzyme located on the inner membrane of the mitochondria that helps to make ATP. It produces ATP by using the energy stored in a proton gradient formed by the electron transport chain. The energy released by this gradient drives the conversion of ADP (adenosine diphosphate) to ATP.

In glycolysis, glucose is converted into pyruvate by a series of chemical reactions. This process involves the use of ATP, which is synthesized from ADP and inorganic phosphate. During the conversion of glucose into pyruvate, electrons are passed from organic molecules to NAD+ (nicotinamide adenine dinucleotide) to form NADH. NADH then delivers these electrons to the electron transport chain, which ultimately leads to the production of ATP.

In the citric acid cycle, pyruvate is converted into acetyl-CoA, which then enters the citric acid cycle. During this cycle, electrons are passed from organic molecules to NAD+ and FAD (flavin adenine dinucleotide) to form NADH and FADH₂. These molecules then deliver these electrons to the electron transport chain, which ultimately leads to the production of ATP.

Overall, the transfer of electrons from organic molecules to molecules such as NAD+ and FAD in glycolysis and the citric acid cycle ultimately leads to the formation of ATP.

To know more about NAD⁺, refer here:

https://brainly.com/question/4221953#

#SPJ11

The total number of chain bonds in an average molecule is 4.

To calculate the repeat unit molecular weight, you need to add the atomic weights of all the atoms in the molecule and multiply the sum by the number of repeat units in the molecule.

How to calculate the repeat unit molecular weight?

Step 1: Determine the molecular formula of the polymer unit.

Step 2: Find the atomic weights of all the atoms present in the repeat unit.

Step 3: Add up the atomic weights of all the atoms in the molecule.

Step 4: Multiply the sum by the number of repeat units in the molecule.

Here's an example:

Polymer unit: CH2CHCl

Atomic weights: C = 12.01 g/mol, H = 1.008 g/mol, Cl = 35.45 g/mol

Molecular weight = (12.01 x 2) + 1.008 + 35.45

= 60.49 g/mol

Repeat unit = (CH2CHCl)n

Repeat unit molecular weight = 60.49 x n, where n is the number of repeat units in the molecule.

Learn more about molecular weight here:

https://brainly.com/question/27988184#



#SPJ11

The material that resists oxidation at elevated temperatures so air can be used as a plasma gas is stain steel.

Stаinless steels аre most commonly used for their corrosion resistаnce. The second most common reаson stаinless steels аre used is for their high temperаture properties; stаinless steels cаn be found in аpplicаtions where high temperаture oxidаtion resistаnce is necessаry, аnd in other аpplicаtions where high temperаture strength is required.

The high chromium content which is so beneficiаl to the wet corrosion resistаnce of stаinless steels is аlso highly beneficiаl to their high temperаture strength аnd resistаnce to scаling аt elevаted temperаtures.

For more information about stаinless steels refers to the link: https://brainly.com/question/13292254

#SPJ11

Data saturation refers to the moment in a research process when enough data has been gathered to make required conclusions and further data collection will not yield value-added insights.

Data saturation refers to the moment in a research process when enough data has been gathered to make required conclusions and further data collection will not yield value-added insights.

Saturation is used as a measure for ending data gathering and/or analysis in qualitative research. Its roots are in grounded theory (Glaser and Strauss 1967), but it now demands acceptance in a variety of qualitative research methods. Data saturation, code saturation, and theme saturation are concerned with the scope of gathered data, whereas meaning saturation and theory saturation are concerned with the profundity of research data.

Learn more about   saturation

https://brainly.com/question/1851822

#SPJ1

The stream having pH 4.5 is acidic in nature.  The reason behind this is likely due to the presence of organic acids.

pH is defined as the hydrogen ion concentration of a solution. If the pH of a solution is below 7 it is considered to be acidic, if it is 7 then it is neutral and pH above 7 is considered to be basic in nature.

Water in streams contains many organic acids, acidic sulphates and nitrates which have a low buffering capacity. Acidic streams occur mostly in  the hilly areas and this acidic water is highly corrosive in nature.

To know more about pH here

https://brainly.com/question/30691408

#SPJ4

The mass of the resulting strontium fluoride precipitate is 42.40 grams if a 175.0 ml solution of 2.594 m strontium nitrate is mixed with 215.0 ml of a 3.162 m sodium fluoride solution.

Volume of 2.594 M strontium nitrate = 175.0 mL = 0.175 L

Volume of  3.162 M sodium fluoride = 215.0 mL = 0.215 L

The Molar mass of SrF2 is 125.62 g/mole

Step 2: The balanced equation:

Sr(NO3)2(aq.) + 2NaF(aq.) → SrF2(s) + 2NaNO3(aq.)

From the balanced equation we know that, SrF2 will precipitate, NaNO3 will dissociate in 2Na+ + 2NO3-

The moles Sr(NO3)2 = molarity * volume

Moles Sr(NO3)2 is,

                     =  3.162 M * 0.175 L

                     = 0.553 moles

We have to calculate moles Na F.

moles Na F is,

              = 3.162 M * 0.215 L

              = 0.679 moles

We get that for 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3. here Na F is the limiting reactant.

There will Sr(NO3)2 is in excess react 0.553/2 = 0.276 moles which will precipitate.

There will remain 0.553 - 0.276 = 0.277 moles that will not precipitate.

Now we have to calculate moles of SrF2 produced. For 1 mole of Sr(NO3)2 we need 2 moles of Na F to produce 1 mole of SrF2 and 2 moles of NaNO3.

For 0.679 moles of Na F consumed, we produced 0.679/2 = 0.3375 moles of SrF2

Now we have to calculate mass of SrF2 produced

Mass SrF2 = moles SrF2 * molar mass SrF2

Mass SrF2 = 0.3375 moles * 125.62 g/mole

Mass SrF2 = 42.40 grams

The mass of the resulting strontium fluoride precipitate is 42.40 grams.

To learn more about Mass

https://brainly.com/question/1838164

#SPJ4

The correct answer is option a. and option c.

The properties of diamond and graphite are different, even though they are both composed of pure carbon because the atoms in diamond and graphite have different hybridizations and the bonding in diamond and graphite is different.

In diamonds, carbon atoms are sp3 hybridized, forming a tetrahedral structure with strong covalent bonds, making it hard and rigid. In graphite, carbon atoms are sp2 hybridized, forming planar hexagonal layers with weaker van der Waals forces between the layers, making it soft and slippery.

The bonding in diamond is composed of strong covalent bonds, while in graphite, there are strong covalent bonds within the layers and weaker van der Waals forces between the layers. This difference in bonding leads to the distinct properties of each allotrope.

We can say that the properties of diamond and graphite are different because they have different hybridisation and bonding.

Therefore option a and option c are correct.

Read more about Allotrope here: brainly.com/question/20897327

#SPJ11

Answer: The combination of 100 mL of 1.0 M CH3NH2 and 100 mL of 0.50 M CH3NH3 would result in a buffer solution.

Explanation:

A buffer solution is a solution that can resist changes in pH upon the addition of an acid or a base. To form a buffer solution, we need a weak acid (or base) and its conjugate base (or acid) in similar concentrations.

Option 1: 100 mL of 1.0 M HCl and 50.0 mL of 1.0 M NaCl

This is not a buffer solution because HCl is a strong acid and NaCl is a neutral salt, which does not have an acidic or basic effect on the solution.

Option 2: 100 mL of 1.0 M HNO2 and 100 mL of 2.0 M NaNO2

This is not a buffer solution because HNO2 is a weak acid, but NaNO2 is not its conjugate base. Instead, NaNO2 hydrolyzes to form NaOH and HNO2, which decreases the buffer capacity.

Option 3: 100 mL of 1.0 M CH3NH2 and 100 mL of 0.50 M CH3NH3

This is a buffer solution because CH3NH2 is a weak base and CH3NH3+ is its conjugate acid. They are in similar concentrations, and therefore, can resist changes in pH upon the addition of an acid or a base.

Option 4: 100 mL of 1.0 M HF and 50.0 mL of 1.0 M HClO

This is not a buffer solution because HF is a weak acid, but HClO is not its conjugate base. Instead, HClO hydrolyzes to form H3O+ and ClO-, which decreases the buffer capacity.

Answer: Liquids are anisotropic because their properties are independent of the axis of testing. This statement is FALSE.

Anisotropy is the property of being directionally dependent, implying various qualities in various directions. In contrast to isotropy, which implies properties that are the same regardless of the direction of measurement. As a result, liquids are isotropic, indicating that their qualities do not differ based on the testing axis.

A material is anisotropic if its mechanical or physical properties differ depending on the direction of measurement. Solids, for example, can be anisotropic. When evaluating solids, it's frequently necessary to be aware of this property, which can have an impact on the data gathered during testing.

Therefore, liquids are not anisotropic because their properties are not dependent on the axis of testing. The correct statement is "Liquids are isotropic because their properties do not depend on the axis of testing."


Learn more about Anisotropy here:

https://brainly.com/question/28379789#



#SPJ11

The pressure of the 28.2 moles of gas at a temperature of 61.8°C is 991 kPa.

Ideal gas law states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.

It is expressed as;

PV = nRT

Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )

Given that:

Number of moles n = 28.2

Temperature T = 61.8°C

Volume V = 79.2 L

Pressure P = ?

First, let's convert the temperature from Celsius to Kelvin:

T = 61.8 + 273.15

T = 334.95 K

Now we can plug in the values and solve for P:

P = nRT/V

P = ((28.2 mol) × (0.08206 Latm/molK) × (334.95 K) ) / 79.2 L

P = 9.7866atm

Convert atm to kPa ( multiply the pressure value by 101.3 )

P = 991 kPa

Therefore, the pressure of the gas is 991 kPa.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

Answer:

The pressure of the gas is 991.6 kPa (to the nearest tenth).

Explanation:

To find the total pressure of the gas in kPa, we can use the ideal gas law.

[tex]\boxed{\sf PV=nRT}[/tex]

where:

Convert the temperature from Celsius to kelvin by adding 273.15:

[tex]\implies \sf 61.8^{\circ}C=61.8+273.15=334.95\;K[/tex]

Therefore, the values are:

Substitute the values into the formula and solve for P:

[tex]\implies \sf P \cdot 79.2=28.2 \cdot 8.314472 \cdot 334.95[/tex]

[tex]\implies \sf P=\dfrac{28.2 \cdot 8.314472 \cdot 334.95}{79.2}[/tex]

[tex]\implies \sf P=991.60471...[/tex]

[tex]\implies \sf P=991.6\;kPa\;(nearest\;tenth)[/tex]

Therefore, the pressure of the gas is 991.6 kPa (to the nearest tenth).

The retention order for a polar stationary phase/nonpolar mobile phase is as follows: Nonpolar compounds will be eluted first, followed by polar compounds. This is due to the higher affinity of the nonpolar compounds for the stationary phase.

To predict the retention order for the given combinations of mobile and stationary phases for the polar stationary phase/nonpolar mobile phase, we need to understand what a retention factor is. In this case, the polarity of the stationary and mobile phases is the key to understanding the retention order.

Analyzing the polar stationary phase/nonpolar mobile phase, The retention factor, k, is defined as the ratio of the concentration of a compound in the stationary phase to its concentration in the mobile phase. It is the retention time of the compound divided by the elution time of the mobile phase.

A polar stationary phase interacts more strongly with polar compounds, while a nonpolar mobile phase interacts more strongly with nonpolar compounds. The retention order depends on the nature of the solutes and the nature of the mobile and stationary phases.

In general, nonpolar solutes have a greater retention factor in nonpolar mobile phases and polar solutes have a greater retention factor in polar mobile phases. So, for a polar stationary phase/nonpolar mobile phase, nonpolar compounds will elute first, followed by polar compounds.

Hence, the retention order for the given combinations of mobile and stationary phases is Nonpolar compounds > Polar compounds.

To know more about nonpolar compounds, refer here:

https://brainly.com/question/19458442

#SPJ11

When a lab technician adds 0.20 mol of NaF to 1.00 L of 0.35 M cadmium nitrate, Cd(NO3)2, the correct statement is that B) The solubility of cadmium fluoride is increased by the presence of additional fluoride ions.

The solubility of salts is influenced by the presence of anions.

The solubility of salts is increased by the presence of anions in some cases. Anions reduce the solubility of salts in other cases. Cadmium nitrate (Cd(NO3)2) has a Ksp of 6.44 × 10−3, which must be compared to the ion product (IP) for Cd(NO3)2 in solution to decide whether precipitation will occur. Cd(NO3)2 is a soluble salt that ionizes according to the following equation:

Cd(NO3)2 → Cd2+ + 2 NO3−.

According to the solubility product rule, the IP for Cd(NO3)2 is determined as IP = [Cd2+][NO3−]^2. Because cadmium fluoride (CdF2) is less soluble than cadmium nitrate, it must be compared to the IP for CdF2 in solution to decide whether precipitation will occur. The ion product (IP) for CdF2 in solution can be calculated using the stoichiometry of the equilibrium between Cd2+ and F− ions: Cd2+(aq) + 2F−(aq) → CdF2(s).

Thus, IP = [Cd2+][F−]^2. As a result, the addition of fluoride ions to the Cd(NO3)2 solution in the form of NaF increases the solubility of cadmium fluoride because the concentration of F− ions is increased. As a result, option B is correct.

Learn more about solubility at

https://brainly.com/question/28170449

#SPJ11

 The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.

800 ml is the initial volume (V1). The original temperature is converted to Kelvin using the formula T1 (in Kelvin) = T1 (in Celsius) + 273.15 T1 = 115°C + 273.15 = 388.15 K

T2 = (V2 * T1) / V1,

T2 = (400 ml * 388.15 K) / 800 ml

T2 = 194.075 K

As a result, the new temperature is roughly 194.075 K when the gas volume is reduced to 400 ml.

Thus, The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.

Learn more about Gas law, refer to the link:

https://brainly.com/question/30458409

#SPJ12

0.34 kJ of heat are absorbed in total.

Chemically, ammonium nitrate has the following formula: [tex]NH_4NO_3[/tex]. It is a salt comprised of ammonium and nitrate ions that is white and crystalline. It is a solid that is extremely hygroscopic and highly soluble in water despite without generating hydrates.

The first step is to calculate the amount of moles of ammonium nitrate consumed. This can be done using the molar mass of ammonium nitrate:

Molar mass of ammonium nitrate = [tex](1 mol NH_4NO_3) * (80.04 g/mol NH_4NO_3) = 80.04 g/mol NH_4NO_3[/tex]

Number of moles of ammonium nitrate consumed

[tex]\frac{(25.0 g NH_4NO_3)}{ (80.04 g/mol NH_4NO_3) }\\\\= 0.3125 mol NH_4NO_3[/tex]

The sum of the heat absorbed per mole of ammonium nitrate and the moles of ammonium nitrate consumed represents the total heat absorbed.

Total heat absorbed =[tex](27 kJ/mol NH_4NO_3) * (0.3125 mol NH_4NO_3) = 0.34 kJ[/tex]

Therefore, the total heat absorbed is 0.34 kJ

learn more about ammonium nitrate Refer:brainly.com/question/13005973

#SPJ1

The mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.

To calculate the mass of Na2CrO4 required to precipitate all the silver ions from a 72.3 mL of 0.134 M solution of AgNO3, we need to use the balanced equation for the reaction between AgNO3 and Na2CrO4:

2AgNO3 + Na2CrO4 → Ag2CrO4 + 2NaNO3

From the balanced equation, we see that 2 moles of AgNO3 reacts with 1 mole of Na2CrO4 to form 1 mole of Ag2CrO4. Therefore, the number of moles of AgNO3 in the given solution is:

0.134 M x 0.0723 L = 0.00970 moles

This means that we need half that amount of Na2CrO4 to precipitate all the silver ions, which is:

0.00485 moles

The molar mass of Na2CrO4 is 161.97 g/mol, so the mass of Na2CrO4 required is:

0.00485 moles x 161.97 g/mol = 0.786 g

Therefore, the mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.

For more questions like Silver ions click the link below:

https://brainly.com/question/30544640

#SPJ11

75 mL of 0.50 M H₂SO₄ solution will be required to completely neutralize 3.0 grams of NaOH.

The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) will be:

H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O

From the equation, we can see that 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide.

First, we need to calculate the number of moles of NaOH present in 3.0 grams:

moles of NaOH = mass/molar mass

moles of NaOH = 3.0 g / 40.00 g/mol (molar mass of NaOH)

moles of NaOH = 0.075 mol

Since 1 mole of H₂SO₄ reacts with 2 moles of NaOH, the number of moles of H₂SO₄ required to neutralize 0.075 moles of NaOH is:

moles of H₂SO₄ = 0.075 mol / 2 = 0.0375 mol

Now, we can use the definition of molarity to calculate the volume of 0.50 M H₂SO₄ required to provide 0.0375 moles of H₂SO₄:

Molarity = moles of solute/volume of solution (in liters)

Volume of solution = moles of solute/Molarity

Volume of solution = 0.0375 mol / 0.50 mol/L

Volume of solution = 0.075 L or 75 mL

To know more about Volume here

https://brainly.com/question/1578538

#SPJ4

1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.

1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)

The balanced chemical equation for the reaction is:

N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]

ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole

ΔH°rxn = -522.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.

2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

The balanced chemical equation for the reaction is:

C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]

ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole

ΔH°rxn = -3327.1 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.

3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

The balanced chemical equation for the reaction is:

CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)

To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:

ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)

where n and m are the stoichiometric coefficients of the products and reactants, respectively.

Using the given standard enthalpies of formation, we get:

ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]

ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole

ΔH°rxn = -1161.5 kJ/mole

Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.

learn more about heat of reaction: https://brainly.com/question/11631046

#SPJ1

The molecular formula of the chemical substance is C4H8.

The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.

In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.

4.67, is the ratio of the molecular mass to the empirical formula mass.

This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.

Therefore, the molecular formula of the chemical substance is C4H8.

to know more about molecular formula refer here:

https://brainly.com/question/14425592#

#SPJ11

The given statement "As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases" is A. true  because When a central atom is attached to more oxygen atoms, its oxidation state decreases. According to the rules of oxidation states, oxygen always has an oxidation state of -2 in almost all its compounds.

Therefore, if we know the oxidation state of oxygen in a compound, we can easily find the oxidation state of the central atom. In compounds that have a central atom and multiple oxygen atoms attached to it, the oxidation state of the central atom is equal to the sum of the oxidation states of all the attached oxygen atoms. For instance, in sulfuric acid (H2SO4), the oxidation state of sulfur is +6, while the oxidation state of each oxygen atom is -2. So, if we have more than one oxygen atom, the sum of their oxidation numbers will be greater than -2, which in turn causes the oxidation state of the central atom to decrease as compared to its original value. Therefore, the statement  As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases Therefore the correct option is A.

The complete question is :

As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases.

a True

b False

Know more about oxidation state   here:

https://brainly.com/question/25551544

#SPJ11