Sydney Pollack studied and taught acting and was a Broadway Actor before directing Plays.
Why is Sydney Pollack important?Sydney Pollack was an American filmmaker, actor, and producer known for his versatile work in film and television. He directed and produced numerous critically acclaimed films, including Out of Africa, Tootsie, The Way We Were, and Three Days of the Condor.
Pollack was a prominent figure in the entertainment industry and was widely respected for his creative vision, leadership skills, and ability to work with actors. He won numerous awards throughout his career, including two Academy Awards, and his legacy continues to influence modern cinema. Pollac
Learn more about Broadway Actors on:
https://brainly.com/question/13962991
#SPJ1
what address shoudl you ping if you want to test local ipv6 operation but dont want to actually send any packets on the network?
To test local IPv6 operation but don't want to send any packets on the network, you should ping the localhost or loopback address, which is ::1. This is also known as the IPv6 loopback address.
In IPv6, the loopback address is a single address that serves the same purpose as the IPv4 loopback address (127.0.0.1). The loopback address for IPv6 is ::1/128. This address can only be used to transmit traffic within a device, and any traffic sent to it will never leave the computer.
The loopback interface is a virtual network interface that is created in the kernel of an operating system, allowing traffic to flow without using any external network interface or physical hardware. Since this address is only used to send traffic inside the computer, it is a good method to test that the computer's IPv6 protocol stack is working correctly. For example, by sending an ICMPv6 echo request message to the loopback address, you can check whether the computer's IPv6 protocol stack is operational. By doing this, you may confirm that the TCP/IP network stack is working properly.Learn more about network visit:
https://brainly.com/question/4464564
#SPJ11
how is a for loop useful when working with arrays
Answer: A for loop examines and iterates over every element the array contains in a fast, effective, and more controllable way. This is much more effective than printing each value individually: console.
Explanation:
Which of the following types of RAM needs to be constantly recharged to retain the contents? A. Dynamic RAM (DRAM) B. Static RAM (SRAM) C. Magnetoresistive RAM (MRAM) D. Flash Memory
The type of RAM that needs to be constantly recharged to retain the contents is A: Dynamic RAM (DRAM).
Dynamic RAM (DRAM) is the type of RAM that needs to be constantly recharged to retain the contents. DRAM stores data as a charge in a capacitor, which leaks over time and requires constant refreshing.
SRAM, on the other hand, stores data in a pair of cross-coupled inverters, which does not require constant refreshing. Magnetoresistive RAM (MRAM) uses magnetic storage elements to store data, and it does not require any refreshing. Flash memory is a type of non-volatile memory that retains its contents even without power, making it suitable for use in portable devices such as digital cameras and USB drives.
Thus, A: Dynamic RAM (DRAM) is correct answer.
You can learn more about RAM at
https://brainly.com/question/13748829
#SPJ11
The type of RAM that needs to be constantly recharged to retain its contents is Dynamic RAM (DRAM). It is because data is stored in capacitors that leak charge, hence needing to be refreshed regularly to avoid data loss.
Explanation:In the options given, the Dynamic RAM (DRAM) is the one that needs to be continually recharged in order to retain the information it holds. DRAM, unlike other RAM types like Static RAM (SRAM), Magnetoresistive RAM (MRAM), or Flash Memory, stores each bit of data in a separate capacitor within an integrated circuit. Because these capacitors leak charge over time, the information needs to be refreshed regularly to prevent data loss.
Learn more about Dynamic RAM here:https://brainly.com/question/34369068
you have the proper client installed on your laptop. what needs to be installed on the remote linux machine
In order to remotely access a Linux machine from your laptop, you would need to have a remote access client installed on your laptop and the necessary server software installed on the remote Linux machine.
The specific server software needed on the remote Linux machine may depend on the type of remote access you want to use. For example, if you want to use SSH (secure shell) to access the command line interface of the remote machine, then you would need to ensure that the SSH server software is installed and running on the remote machine. The specific software needed on the remote Linux machine will depend on the type of remote access you want to use and the specific configuration of the remote machine.
Learn more about Linux machine: https://brainly.com/question/28347451
#SPJ11
which protocol provides up to 16 instances of rstp, combines many vlans with the same physical and logical topology into a common rstp instance, and provides support for portfast, bpdu guard, bpdu filter, root guard, and loop guard?
This protocol integrates numerous VLANs with the same physical and logical topology into a single RSTP instance, supports PortFast, and offers up to 16 instances of RSTP (Rapid Spanning Tree Protocol).
Which protocol allows for up to 16 RSVP instances?Explanation: MSTP, an IEEE standard protocol that offers up to 16 instances of RSTP and merges numerous VLANs with the same physical and logical topology into a single RSTP instance, is implemented by Cisco as STP-Rapid PVST+-PVST+-MSTE.
What is the purpose of BPDU guard?Although the port can broadcast STP BPDUs, the BPDU Guard feature prevents the port from receiving STP BPDUs. A BPDU Guard enabled port is shut down and changes its state to ErrDis when a STP BPDU is received on it.
To know more about VLANs visit:-
https://brainly.com/question/30651951
#SPJ1
write a cookiejar class that will is set to a capacity and tracks how much stuff the cookiejar is storing.
The CookieJar class can be used to track how much stuff is stored in a limited capacity. It should include a constructor, a store method, and a check method to ensure items are not overfilled.
A CookieJar class can be used to store items with a limited capacity. The class will track the amount of stuff stored and can be used to prevent overfilling. The class should include a constructor, which sets the capacity of the CookieJar. The class should also include a method to store items in the CookieJar and a method to check how much stuff is stored.
The store method should take a parameter of the item to be stored and should check if the CookieJar is already full. If it is not full, the item should be stored and the amount stored should be updated. If the CookieJar is already full, an error should be raised. The check method should return the amount of stuff currently stored in the CookieJar.
You can learn more about constructors at: brainly.com/question/29999428
#SPJ11
which of the following statements are valid? a constructor can return a integer a constructor can return a char a constructor cannot return anything a constructor can return a void
Out of the given statements, the following statements are valid for a constructor: a constructor cannot return anything and a constructor can return a void.
Know what is a constructor! A constructor is a method that has the same name as the class in which it is located. When an object is created, the constructor is called, which initializes the object's values.
Constructors are used to provide initial values for the object's state (the values of instance variables) and to allocate memory for the object. A constructor does not have a return type because it returns an instance of the class it belongs to. Therefore, statement (c) "a constructor cannot return anything" is valid. A return type may be defined for a method in Java, which specifies the data type that the method will return after execution. Constructors, on the other hand, never specify a return type because they always return a reference to an instance of the class. Furthermore, it is not necessary to explicitly declare constructors because Java automatically creates a default constructor if one is not specified. Since the default constructor does not have any parameters, it initializes all variables to their default values, making it possible to construct objects without having to specify any values, making statement (d) "a constructor can return a void" valid.Learn more about constructor visit:
https://brainly.com/question/29999428
#SPJ11
Suppose a new technology X is partially backwards-compatible with an older technology Y so that any person who adopts X still receives some benefits from interacting with friends using Y ( and vice versa). Consider the following payoff matrix which models this situation of partial compatibility. Player B X Y
Player A X (5,5) (3,2)
Y (2,3) (4,4)
Suppose that technology X is spreading through a network of users of Y. The payoff to each individual is determined by playing the above coordination game with each of their neighbors in the network. Does this coordination game also result in a "threshold contation"? That is, if p is the fraction of node A's neighbors that adopt X, is there some critical value q such that A should adopty X, when p is at least q, and remain with Y when p is less than q? If so, determine the value of q. If not, explain why the threshold does not exist
Yes, this coordination game also results in a threshold contagion.
To determine the critical value q, we can use the concept of the best response. The best response for player A is to adopt X if and only if the expected payoff from adopting X is greater than the expected payoff from remaining with Y. We can calculate the expected payoffs as follows:
If A adopts X:
A's payoff when playing against a neighbor who uses X is 5 with probability p and 3 with probability (1-p)
A's payoff when playing against a neighbor who uses Y is 2 with probability p and 4 with probability (1-p)
Therefore, A's expected payoff from adopting X is:
5p + 3(1-p) with probability p
2p + 4(1-p) with probability (1-p)
If A remains with Y:
A's payoff when playing against a neighbor who uses X is 2 with probability p and 4 with probability (1-p)
A's payoff when playing against a neighbor who uses Y is 4 with probability p and 4 with probability (1-p)
Therefore, A's expected payoff from remaining with Y is:
2p + 4(1-p) with probability p
4 with probability (1-p)
To find the critical value q, we need to find the value of p at which A is indifferent between adopting X and remaining with Y. In other words, we need to find the value of p for which the expected payoffs from adopting X and remaining with Y are equal.
Setting the two expected payoffs equal to each other and solving for p, we get:
5p + 3(1-p) = 2p + 4(1-p)
Solving for p, we get p = 1/3.
Therefore, if at least one-third of A's neighbors adopt X, then A should adopt X as well. If fewer than one-third of A's neighbors adopt X, then A should remain with Y.
To get a similar answer on backward-compatible:
https://brainly.com/question/28571683
#SPJ11
you are configuring the acl for the network perimeter firewall. you have just finished adding all the proper allow and deny rules. what should you place at the end of your acl rules?
At the end of your Access Control List (ACL) rules, you should always include a “deny all” rule.
This rule explicitly denies all traffic that is not explicitly allowed by the previous rules, ensuring that all traffic that does not match the criteria specified in the other rules is blocked from entering the network.
In the context of a firewall, an ACL is a set of rules that determine whether or not a packet of data is allowed to pass through the firewall. The ACL defines which traffic is allowed to pass through the firewall, and which traffic is denied. By setting a “deny all” rule at the end of the ACL, all traffic that does not match the criteria specified in the other rules is blocked from entering the network.
The “deny all” rule should be the last rule in the list of ACL rules. This rule is also known as an “implicit deny” rule, as it is implied that anything that does not match the other rules should be denied. This rule is also known as the “default deny” rule, as the default action is to deny access.
The “deny all” rule helps to ensure that your firewall is secure, as any traffic that is not explicitly allowed is blocked from entering the network. It is important to remember to include this rule at the end of the list of ACL rules, as it provides a final layer of protection against unauthorized traffic.
Learn more about Access Control List:https://brainly.com/question/30456925
#SPJ11
write a c program to convert the change given in quarters, dimes, nickels, and pennies into dollars and cents.sr2jr
This is a relatively simple program to write in C. Here's a template you can use:
#include <stdio.h>
int main(){
// Declare variables for quarters, dimes, nickels, and pennies
int quarters, dimes, nickels, pennies;
// Calculate the number of dollars and cents
int dollars = (quarters * 25 + dimes * 10 + nickels * 5 + pennies) / 100;
int cents = (quarters * 25 + dimes * 10 + nickels * 5 + pennies) % 100;
// Print the result
printf("%d dollars and %d cents\n", dollars, cents);
return 0;
}
The program starts with including the standard input-output library. Then, the main function is defined in the program. The variables quarters, dimes, nickels, pennies, total_cents, and dollars are declared in the program.Next, the user is prompted to enter the number of quarters, dimes, nickels, and pennies. Then, the total amount in cents is calculated and stored in the variable total_cents.The value of total_cents is divided by 100 to get the value in dollars. Finally, the value of dollars is displayed on the console with two decimal places.
For such more questions on c program:
brainly.com/question/15683939
#SPJ11
to qualify a column name, precede the name of the column with the name of the table, followed by a(n) .
To qualify a column name, precede the name of the column with the name of the table, followed by a period (.).
In a database, it is common to have multiple tables that are related to each other. When querying data from these tables, it is important to specify which table a particular column belongs to, especially if the column name appears in multiple tables.
This is known as the "table alias" or "table qualifier" and is used to specify which table the column belongs to, especially when multiple tables are being joined in a query. For example, if you have two tables named "Customers" and "Orders", and both tables have a column named "ID", you could specify which table's ID column you want to select by using the table qualifier: "Customers.ID" or "Orders.ID".
Learn more about syntax of referencing column names in SQL queries:https://brainly.com/question/29418402
#SPJ11
you conducted a security scan and found that port 389 is being used when connecting to ldap for user authentication instead of port 636. the security scanning software recommends that you remediate this by changing user authentication to port to 636 wherever possible. what should you do?
In order to remediate the issue with port 389 being used when connecting to LDAP for user authentication, you should change the authentication port to 636 wherever possible. To do this, you will need to identify the applications and services which are currently using port 389, and modify their configurations to use port 636 instead. Depending on the system, this may require changing the server configuration, client configuration, or both.
The Lightweight Directory Access Protocol (LDAP) is an open, vendor-neutral, directory service protocol that is used to manage and access distributed directory information over an IP network. It was developed by the Internet Engineering Task Force (IETF) as an evolution of the earlier X.500 Directory Access Protocol. LDAP provides a way to access and modify directory services that store information about users, groups, systems, networks, and other resources in a structured way. It allows clients to search, add, delete, and modify entries in a directory service, and supports authentication and authorization mechanisms to control access to the directory data.
Learn more about Lightweight Directory Access Protocol: brainly.com/question/28364755
#SPJ11
a) draw the runtime stack after each line executes under static scoping. what value assigned to z in line 12? b) draw the runtime stack after each line executes under dynamic scoping. what value assigned to z in line 12?
Runtime stack for Static Scoping, the value of the z variable at line 12 is 20, and the Runtime stack for Dynamic Scoping, the value of the z variable at line 12 is 10.
As per the given question, we need to create a runtime stack for both Static and Dynamic Scoping, respectively. And the value of the z variable on line 12 needs to be evaluated. Now, let's proceed with the solution:
Static Scoping: In Static scoping, the variable declared in the outer block retains the same value for all the inner blocks. That means, the variable is not changed by the inner block. Hence, z = 20, will remain the same throughout the program.
Here's the value of the z variable at line 12: 20
Dynamic Scoping: In Dynamic scoping, the variable declared in the inner block, overwrites the variable declared in the outer block. Hence the value of the z variable at line 12 will be 10.
Here's the value of the z variable at line 12: 10
To learn more about "dynamic scoping", visit: https://brainly.com/question/31107091
#SPJ11
I need unblocked games for PK Younge
Some popular types of unblocked games that are commonly available on the internet include games like Pac-Man, Super Mario Bros, Need for Speed and Call of Duty.
What are unblocked games?Interestingly, the term "unblocked games" is used by gamers to refer to games that are not blocked by one's school or workplace firewalls. In other words, students or employees have access to play them during their free time.
It is important to bear in mind, that while some argue that unblocked games can be a distraction and can negatively impact academic or work performance, some also argued that they can provide a much-needed break and can help relieve stress.
You can learn more about games here https://brainly.com/question/27355039
#SPJ1
You've asked an incomplete question. However, I provided some explanation of what unblocked games are.
private ipv4 address 172.331.255.255 is an example of a full class a address, as defined by request for comment 1918. true false
The aforementioned private IP addresses, 172.331.255.255 ipv4 isn't present. Thus, the given statement is false.
Internet Protocol version 4, also known as IPv4, is a protocol used to send and receive data on the internet. IPv4 is a connectionless protocol that operates at the network layer of the OSI model, providing internet addressing to devices.
Internet Protocol Version 4 (IPv4) addresses are made up of 32 bits and are displayed in dotted-decimal notation. Routers on the internet use these addresses to direct traffic to and from networks. Request for Comment (RFC) 1918RFC 1918 is a request for comments (RFC) that specifies addresses that can be used in private networks. It is used to limit IP address fragmentation when several organizations with private IP networks need to interconnect with one another. The addresses that are defined in RFC 1918 are private IP addresses. These addresses can only be used on private networks, and not on the public internet. Because of the range of private IP addresses available, there is no need to assign globally unique IP addresses to every device on a private network. Private IPv4 addresses 172.16.0.0 to 172.31.255.255 (16.7 million addresses) 192.168.0.0 to 192.168.255.255 (65,536 addresses) 10.0.0.0 to 10.255.255.255 (16.8 million addresses). From the aforementioned private IP addresses, 172.331.255.255 isn't present. Thus, the given statement is false.Learn more about IP address visit:
https://brainly.com/question/16011753
#SPJ11
A license filter in a search engine helps you find images online that you can legally copy for personal or commercial use without paying a fee.a. Trueb. False
The given statement "A license filter in a search engine helps you find images online that you can legally copy for personal or commercial use without paying a fee." is true because a license filter in a search engine allows users to search for images that have been licensed for specific types of use, such as personal or commercial use.
This helps users to find images that they can legally copy and use without infringing on the original creator's copyright. By filtering search results based on licensing information, users can avoid accidentally using images that are protected by copyright, and reduce their risk of facing legal action for copyright infringement. License filters are an important tool for anyone who regularly uses images in their work or personal projects and wants to ensure that they are using them legally.
You can learn more about search engine at
https://brainly.com/question/512733
#SPJ11
you notice that your computer is running slow and decide to reboot the computer to see if that will fix the problem. during the reboot, you notice that the amount of ram shown during the ram count is not the same as it was the day before. what might cause this problem?
There are a few possibilities that could cause the amount of RAM shown during the RAM count to change after a reboot. They are :
HardwareBIOS SettingsSoftware Issue.What is RAM?RAM (Random Access Memory) is a type of computer memory that is used to temporarily store data that the computer is actively using.
The possibilities that could cause the amount of RAM shown during the RAM count to change after a reboot are:
Hardware issue: There could be a problem with the RAM module or slot, causing it to malfunction or become partially dislodged. This could cause the system to recognize less RAM than it should.
Software issue: There could be an issue with the operating system or other software that is causing the system to allocate less RAM to the system.
BIOS settings: The amount of RAM recognized by the system can also be affected by the BIOS settings. It's possible that a change was made to the settings that caused the system to recognize less RAM than before.
In any case, if the amount of RAM recognized by the system has changed.
Learn more about RAM:
https://brainly.com/question/30765530
#SPJ1
vremus is an art student who wants to start creating digital artwork on his computer. he wants to be able to create images that retain their quality in all sizes. which type of app should he use?
Student of art Remus wants to begin producing digital artwork on his computer. He hopes to be able to produce photos that are high-quality at all scales. He should use a drawing app as his app type.
What is digital artwork?Any creative endeavour or artistic practise that incorporates digital technology into the production or presentation process is referred to as digital art. It also applies to computational art that interacts with and utilises digital media. The term "digital art" describes works of art that incorporate digital technology into their production or display. Although various media, including video art, photography, and digital printing, are technically included in the definition, using computer programmes is most frequently linked to it.Digital art can be defined as anything created or produced using digital media, such as animations, pictures, drawings, movies, paintings, and other things.To learn more about digital artwork, refer to:
https://brainly.com/question/24410044
which access list statement will permit all http sessions to network 192.168.144.0/24 containing web servers?
To permit all HTTP sessions to network 192.168.144.0/24 containing web servers, the following access list statement can be used:
access-list 101 permit tcp any 192.168.144.0 0.0.0.255 eq www
This access list statement allows any source IP address (denoted by any) to access any web server within the network 192.168.144.0/24 (denoted by 192.168.144.0 0.0.0.255) on port 80 (denoted by eq www). Port 80 is the default port used for HTTP traffic.
Note that this access list statement should be applied to the appropriate interface or interfaces on the router using the ip access-group command. The access list number (in this case, 101) can be modified to match the access list number being used on the router.
Learn more about web servers:
https://brainly.com/question/27960093
#SPJ11
what tool in ehr go provides increased visibility to an allergy entered using the tab you selected as your answer for question 6?
The tool in EHR Go that provides increased visibility to an allergy entered using the tab you selected as your answer for question 6 is the "Allergies" tab. This tab allows users to easily track and manage allergies and other medical information.
The Allergies tab is broken down into two sections: the Allergies & Reactions section, which displays all allergies entered, and the Current Allergies section, which shows only active allergies. By clicking on an allergy, users can view the source, severity, onset date, reaction, and other important information.
The Allergies tab also allows users to easily add and remove allergies, as well as adjust their severity levels. The "Add Allergy" button lets users enter a new allergy or edit an existing one. To remove an allergy, simply click the red "Remove Allergy" button.
Additionally, the Allergies tab provides an easy way to set up alerts for any new allergies or changes to existing allergies. This feature helps to ensure that medical staff is alerted of any new allergies or changes in severity.
You can learn more about EHRs at: brainly.com/question/30086702
#SPJ11
aside from color names and hex color codes, what is another way to encode a css color value? give an example.
Aside from color names and hex color codes, another way to encode a CSS color value is by using RGB values. An example of CSS color value in RGB format is as follows: RGB (255, 0, 0), which represents the color red.
RGB values CSS (Cascading Style Sheets) can be used to style web pages. It is used to change the appearance of text, backgrounds, borders, and many more. CSS supports three different ways to describe colors on a web page, which include color names, RGB values, and Hexadecimal color codes.
RGB values are specified as a set of three numbers that represent the red, green, and blue values. They have the following syntax: RGB (red, green, blue), where each color value is a number between 0 and 255. For example, the RGB value for red is RGB (255, 0, 0). The RGB color model is based on the colors of light, and its main advantage is its ability to create millions of color combinations.
You can learn more about RGB values at: brainly.com/question/19262252
#SPJ11
which one of these connection types has the longest delay? group of answer choices cellular wired infrared wireless
The delay is greatest on cellular. Among all connection methods, wired networks can offer the fastest data transmission rates.
How do wireless access points and routers differ?A local area network is created by the router, which also controls all of the connected devices and communication. On the other hand, an access point is a sub-device of the local area network that enables more devices to be connected to the network and offers another location for devices to connect from.
What does a router do in a network?One or more packet-switched networks or subnetworks can be connected using a router. It manages traffic between these networks by forwarding data packets to their intended IP addresses and permits communication between these networks.
To know more about data transmission visit:-
https://brainly.com/question/13382659
#SPJ1
Rachel works for a large graphic design firm. She is making a poster to notify people about an upcoming graphic design seminar. Which type of poster is she making?
Rachel is creating an _______ poster to notify people about the upcoming graphic design seminar.
Answer:
a eye- catching poster
Explanation:
sorry if its wrong
Identify the most suitable layout for a facility that handles a wide variety of customized orders.
a. A cellular layout
b. A process layout
c. A fixed-position layout
d. A product layout
The most suitable layout for a facility that handles a wide variety of customized orders is :
(b) A process layout
The most suitable layout for a facility that handles a wide variety of customized orders is a process layout. A layout can be defined as the way equipment, machinery, and people are arranged within a building or site.
Process Layout is the layout that is most suitable for a facility that handles a wide variety of customized orders. Process layouts are made up of various departments that perform similar operations. The workflow is more adaptable to changes in customer needs and product lines in this type of layout. A process layout is a type of layout where machines and workstations are arranged according to the processing needs of the various products or product groups produced in the facility. In this type of layout, each department has its own set of equipment and can manufacture a wide range of products. Thus, the process layout is the best layout for a facility that handles a wide variety of customized orders.
Thus, we can conclude that for the given question, the correct option is :
(b) A process layout
To learn more about process layout visit : https://brainly.com/question/15101405
#SPJ11
What blocks are needed to include a cutscene in a Scratch game?
A) Broadcast, stop other scripts
B) Forever, If, While
C) Play, If
D)When touching, Forever
The blocks needed to include a cutscene in a Scratch game are:
A) Broadcast, stop other scripts
What is the braodcast block used for?The "Broadcast" block is used to trigger a specific event, such as the start of a cutscene, while the "Stop other scripts" block is used to pause other scripts in the background to ensure that the cutscene runs smoothly.
Hence the broadcast block are needed to include a cutscene in a Scratch game
Read more on broadcast block here:https://brainly.com/question/9238983
#SPJ1
when a data set is tabulated into bins, we lose information about the location of the x values within bins but gain clarity of presentation because grouped data can be displayed more compactly than raw data. true false question. true false
The given statement, when a data set is tabulated into bins, we lose information about the location of the x values within bins but gain clarity of presentation because grouped data can be displayed more compactly than raw data, is true.
However, this loss of information is outweighed by the clarity of presentation gained by grouping data into bins, as this makes the data more compact and easier to visualize.
One major advantage of grouped data is that it can be displayed more compactly than raw data. This creates a clearer and more concise picture of the data, which can be useful when presenting data to others. Additionally, it can be easier to identify patterns and trends in grouped data, as it reduces the amount of noise in the data.
Learn more about tabulation of data:
https://brainly.com/question/26358920
#SPJ11
How can you tell an open innovation project from one that is not?
An open innovation project is one in which a company seeks external ideas, knowledge, and expertise from outside the organization to advance its goals, rather than relying solely on internal resources. Conversely, a project that is not open innovation relies primarily on internal resources and expertise.
Here are some characteristics of an open innovation project:
Collaboration: Open innovation projects involve collaboration between internal teams and external partners such as customers, suppliers, academic institutions, startups, and other companies.
Sharing of knowledge: An open innovation project requires sharing of knowledge, information, and expertise between the internal and external parties.
Involvement of external parties: In an open innovation project, external parties are actively involved in the innovation process, from ideation to commercialization.
Innovation ecosystem: An open innovation project is part of a larger innovation ecosystem that fosters the exchange of ideas, knowledge, and expertise.
Access to resources: An open innovation project provides access to external resources such as funding, facilities, equipment, and talent.
In contrast, a project that is not open innovation is typically driven by internal resources and expertise. Internal teams are responsible for all aspects of the innovation process, and external parties are not involved in any significant way.
In summary, an open innovation project involves collaboration, sharing of knowledge, involvement of external parties, an innovation ecosystem, and access to external resources.
when sitting at a computer running linux, what key combination is pressed to open the graphical terminal?
Press the "Ctrl+Alt+T" key combination to open the graphical terminal when sitting at a computer running Linux. This shortcut allows users to quickly access the command-line terminal from the Linux graphical user interface (GUI).
First, make sure that your Linux machine is powered on and that you are logged in. Then, press the "Ctrl+Alt+T" keys simultaneously on the keyboard. This will open up a window displaying the command-line terminal. In the terminal, you can type and execute commands for the Linux operating system.
To exit the terminal, type in the command “exit” and press enter. This will close the terminal and return you to the Linux GUI. The “Ctrl+Alt+T” key combination can be used to quickly access the Linux command line terminal on any Linux machine.
You can learn more about Linux at: brainly.com/question/30176895
#SPJ11
Under which of the following circumstances might you be most likely yo contact a professional to repair your computer or mobile device?a. screen is brokenb. computer cannot synchronize with bluetooth accessoriesc. computer or device is too hotd. printer will not print
The circumstance where you would be most likely to contact a professional to repair your computer or mobile device is when your A: screen is broken.
If the screen of a computer or mobile device is broken, it is a hardware issue that requires specialized repair. Attempting to fix it without proper training and tools can cause further damage. Therefore, contacting a professional repair service is the best course of action.
In the case of other issues like synchronization, heating, or printing, there are often troubleshooting steps that a user can take before considering professional repair. However, a broken screen is a physical issue that needs to be addressed by someone with the right expertise and resources.
Thus correct answer is: A. Screen is broken.
You can learn more about reparing broken screen at
https://brainly.com/question/15011392
#SPJ11
if a relational database table is in boyce-codd normal form, it is also in group of answer choices d. all of a., b., and c.
Yes, if a relational database table is in Boyce-Codd normal form (BCNF), it is also in all of a., b., and c.
BCNF is a normal form in database normalization that further refines the results of the Third Normal Form (3NF). It is an advanced form of database normalization, and it applies to the design of relational databases. It is an important tool for database designers, as it helps to reduce data redundancy and improves the integrity of the database.
In order to be in BCNF, a database must meet the following criteria: (1) every determinant must be a candidate key, (2) every non-prime attribute must be fully functionally dependent on a single determinant, and (3) all transitive dependencies must be eliminated. A database that meets these criteria is said to be in BCNF and is also in all of a., b., and c.
In conclusion, if a relational database table is in BCNF, then it is also in all of a., b., and c. BCNF is a higher form of normalization that eliminates transitive dependencies and improves database integrity.
You can learn more about Boyce-Codd normal form at: brainly.com/question/29735359
#SPJ11