Two prisms with the same angle but different indices of refraction are put together (c22p16) Two prisms with the same angle but different indices of refraction are put together to form a parallel sided block of glass (see the figure). The index of the first prism is n 1
​
=1.50 and that of the second prism is n 2
​
=1.68. A laser beam is normally incident on the first prism. What angle will the emerging beam make with the incident beam? (Compute to the nearest 0.1 deg) Tries 0/5

Answer: B

Explanation: We see the color black when no light is being reflected. Black absorbs all of the light unlike white which reflects all of it.

Based on the information, the correct options to fill the gap will be:

Electromagnetic waves are waves that travel at the speed of light and consist of oscillating electric and magnetic fields. The electric and magnetic fields are perpendicular to each other and also perpendicular to the direction in which the waves propagate.

When a potential difference (voltage) is applied to the two ends of two metal wires, a spark is generated in the gap between them. This spark results in the creation of electromagnetic waves.

Learn more about waves on

https://brainly.com/question/15663649

#SPJ4

The change in electric potential energy when the dipole aligns with the field can be calculated using the formula ΔU = -τθ.

we can substitute values into the formula to calculate the change in electric potential energy (ΔU):

ΔU = -τθ

ΔU = -(1.0 × 10^-6 Nm) × (90°)

ΔU = -9.0 × 10^-8 Nm

Therefore, the change in electric potential energy when the dipole rotates to align with the field is -9.0 × 10^-8 Nm.

Energy is the capacity to do work or cause change. It exists in various forms, including kinetic, potential, thermal, electrical, and chemical energy. Energy is neither created nor destroyed but can be converted from one form to another. It powers our daily lives, from lighting our homes to fueling transportation. Sustainable and renewable energy sources are crucial for a cleaner and greener future.

Learn more about energy here:

#SPJ11

The relative humidity is 50%, indicating the air is holding half of the moisture it can hold at the current temperature, aiding in weather predictions.

Given that an air parcel is sinking 1 km, the temperature in the parcel increases by 10 degrees C, but the vapor pressure remains constant. The vapor pressure in the parcel is 10 hPa, and the saturation vapor pressure is 20 hPa within the parcel. To calculate the relative humidity, we use the formula: Relative Humidity = Vapor pressure / Saturation vapor pressure * 100.

Plugging in the given values, we have: Relative humidity = 10 / 20 * 100. Simplifying the equation, we find that the relative humidity is 50%.

A relative humidity of 50% indicates that the air is holding half the amount of moisture it is capable of holding at the current temperature. This measure is crucial in meteorology as it helps forecasters predict cloud formation, precipitation, and other weather phenomena.

Learn more about humidity

https://brainly.com/question/30765788

#SPJ11

The magnitude of the electric force between two charged objects can be calculated using Coulomb's Law. Coulomb's Law states that the electric force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

Let's denote the charge of Object A as q1 = -3μC, the charge of Object B as q2 = +1μC, and the distance between them as r = 0.30 meters.

The formula for the magnitude of the electric force (F) is given by:

F = k * |q1 * q2| / r^2

where k is the electrostatic constant, approximately equal to 9 × 10^9 N·m^2/C^2.

Substituting the given values into the formula, we have:

F = (9 × 10^9 N·m^2/C^2) * |-3μC * +1μC| / (0.30m)^2

Simplifying the expression, we get:

F = (9 × 10^9 N·m^2/C^2) * (3μC * 1μC) / (0.30m)^2

Converting the charges to coulombs and simplifying further, we have:

F = (9 × 10^9 N·m^2/C^2) * (3 × 10^(-6) C * 1 × 10^(-6) C) / (0.30m)^2

Calculating the expression, we find:

F = 9 × 3 × 1 / (0.30)^2 N

Simplifying further, we obtain:

F = 9 N

Therefore, the magnitude of the electric force between Object A and Object B, when they are 0.30 meters away from each other, is 9 Newtons.

Read more about Coulomb law here

brainly.com/question/506926

#SPJ11

The current flowing in the searchlight is 5 A, and the resistance of the searchlight is 2.4 Ω.

a) To calculate the current that flows in the searchlight, we can use Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R). In this case, the voltage is 12 volts, and we need to find the current.

Using Ohm's Law:

I = V / R

Rearranging the equation to solve for the current:

I = V / R

We are given the voltage V (12 volts), so we can substitute it into the equation:

I = 12 V / R

We are not given the resistance directly, so we need additional information to calculate it.

b) To calculate the resistance, we can use the power equation:

P = V * I

Given that the power (P) is 60 watts and the voltage (V) is 12 volts, we can rearrange the equation to solve for the current (I):

I = P / V

Substituting the given values:

I = 60 W / 12 V

I = 5 A

Now that we have the current, we can use Ohm's Law to find the resistance:

R = V / I

R = 12 V / 5 A

R = 2.4 Ω

To know more about Ohm's Law

https://brainly.com/question/1247379

#SPJ11

Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.

Given Data:The mass of the carousel (m) = 2000 kgRevolution per minute (rpm) = 2.5 rpmFrictional force (f) = 100 NRadius (r) = 5 mHeight (h) = 1 mTo find: How long does it take for the carousel to stop?How much work is done by friction on the carousel to stop it?Solution:Formula used:Centripetal force (f) = mv²/r ……………..(i)Where,m = mass of the objectv = velocityr = radius of the object.

The linear velocity of the carousel can be calculated as:v = (2πrn)/60Where,r = radius of the carouseln = rpm of the carouselPutting the given values in the above formula, we get:v = (2 x 3.14 x 5 x 2.5)/60v = 2.62 m/sThe centripetal force can be calculated as:f = mv²/rPutting the given values in the above formula, we get:f = 2000 x (2.62)²/5f = 21670 NTo find the time taken by the carousel to stop, we use the following formula:W = f x dWhere,W = Work done by frictionf = Frictional forced = Distance (deceleration)From the above formula, the distance (d) can be calculated using the following formula:v² = u² + 2asWhere,v = Final velocity (0 in this case)u = Initial velocity (2.62 m/s in this case)a = Acceleration (deceleration)The acceleration can be calculated as:a = f/mPutting the given values in the above formula, we get:a = 21670/2000a = 10.835 m/s².

Now, using the above calculated values, we get:v² = u² + 2asd = (v² - u²)/2ad = (0 - (2.62)²)/(2 x 10.835)d = 0.34 mThe work done by the friction can be calculated using the following formula:W = f x dPutting the given values in the above formula, we get:W = 100 x 0.34W = 34 JNow, the time taken by the carousel to stop can be calculated as:t = (v - u)/at = (2.62 - 0)/10.835t = 0.24 sTherefore, the time taken by the carousel to stop is 0.24 s.The work done by friction on the carousel to stop it is 34 J.Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.

Learn more about Velocity here,

https://brainly.com/question/80295

#SPJ11

The efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.

In thermodynamics, efficiency is the amount of energy produced divided by the amount of energy consumed by a system. It can be defined as the ratio of output work to input energy. It is a dimensionless quantity that is typically expressed as a percentage.

In the given problem, the efficiency of an engine is to be calculated. The work done by the engine is 100.0 J, and the heat discharged is 50.0 J.

Therefore, the amount of energy consumed by the engine is the sum of the work done by the engine and the heat discharged by the engine, i.e., 100.0 J + 50.0 J = 150.0 J.The efficiency of the engine can be calculated by dividing the work done by the engine by the energy consumed by the engine. Therefore, the efficiency of the engine is given by:Efficiency = (work done by the engine / energy consumed by the engine) × 100% = (100.0 J / 150.0 J) × 100% = 66.67%.

Therefore, the efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.

to know more about engine

https://brainly.com/question/25257437

#SPJ11

By substituting the frequency in the formula, we get the angular frequency of the wave as 2 × 3.14 × 1000 rad/s, which is approximately 6280 rad/s. Therefore, the angular frequency of the sound wave is approximately 6280 rad/s.

Given,Period, T = 1.00 ms = 1.00 × 10⁻³ sLet's calculate the frequency of the wave using the relation,frequency, f = 1 / TWhere f = frequencyWe can substitute the given values and get,f = 1 / T= 1 / (1.00 × 10⁻³ s)= 1000 HzWe get the frequency of the wave as 1000 Hz. The angular frequency of the wave is given by the relation,Angular frequency, ω = 2πfWhere ω = Angular frequencyWe can substitute the given values and get,ω = 2πf= 2 × 3.14 × 1000 rad/s≈ 6280 rad/s

Therefore, the angular frequency of the wave is approximately 6280 rad/s.Both the solutions are summarized below in 150 words:For a given sound wave with a period of 1.00 ms, we can calculate the frequency of the wave using the formula, frequency = 1 / T. By substituting the values of the period in the formula, we get the frequency of the wave as 1000 Hz. Therefore, the frequency of the sound wave is 1000 Hz.The angular frequency of the sound wave can be calculated using the formula, ω = 2πf.

By substituting the frequency in the formula, we get the angular frequency of the wave as 2 × 3.14 × 1000 rad/s, which is approximately 6280 rad/s. Therefore, the angular frequency of the sound wave is approximately 6280 rad/s.

Learn more about Sound wave here,

https://brainly.com/question/16093793

#SPJ11

Therefore, the passengers feel as if they are being thrown away from the centre of the curve, even though there is no actual force acting on them in that direction.

Centripetal acceleration is defined as the acceleration experienced by an object in circular motion and is directed towards the centre of the circle. The formula for centripetal acceleration is a = v²/r, where v is the velocity of the object and r is the radius of the circle.Here, the object moves with a speed of 4.4 m/s in a circle of radius 2.6 m. Therefore, the centripetal acceleration is given bya = v²/r = (4.4)²/2.6 = 7.4 m/s²Hence, the centripetal acceleration of the object is 7.4 m/s².Now, as the centripetal force is directed towards the centre, why do you feel that you are 'thrown' away from the centre as a car goes around a curve?The reason behind this phenomenon is inertia. Inertia is defined as the tendency of an object to resist any change in its state of motion. When a car goes around a curve, it changes its direction of motion and the passengers inside the car experience a force towards the outside of the curve, which is known as the centrifugal force.The centrifugal force is the outward force that opposes the centripetal force and is proportional to the square of the speed and the radius of the circle. This force is responsible for throwing the passengers away from the centre of the curve.The centrifugal force is not a real force, but rather a fictitious force that arises due to the frame of reference used to observe the motion of the object. Therefore, the passengers feel as if they are being thrown away from the centre of the curve, even though there is no actual force acting on them in that direction.

To know more about centripetal acceleration  visit:

https://brainly.com/question/10710931

#SPJ11

Therefore, the inductance of the inductor is 11.73 H.

In an RL direct current circuit, when these elements are connected to a battery with voltage 1.36 V and the resistance of the resistor is 119 Ω, the current goes to 0.21 times the maximum current after 0.034 s.

We need to find the inductance of the inductor.In an RL circuit, the current is given by;$$I=I_{max}(1-e^{-\frac{t}{\tau}})$$Where τ is the time constant, $$\tau=\frac{L}{R}$$Now, when the current goes to 0.21 times the maximum current,

we can write;$$0.21I_{max}=I_{max}(1-e^{-\frac{t}{\tau}})$$Simplifying this equation,$$0.21=1-e^{-\frac{t}{\tau}}$$Solving for $$\frac{t}{\tau}$$We get;$$\frac{t}{\tau}=2.76$$Substituting the value of t and R we get;$$2.76=\frac{L}{R}(\frac{1}{0.034})$$$$L=0.034 \times 2.76 \times 119$$$$L=11.73 \text{ H}$$

Therefore, the inductance of the inductor is 11.73 H.

to know more about inductance...

https://brainly.com/question/17212673

#SPJ11

The magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.

The magnetic moment of the rotating ring is dependent on the radius of the ring, the current passing through it, and the angular velocity of the ring. The magnetic moment of a ring that rotates at a constant angular speed in a magnetic field is given by the formula:μ = Iπr²where,μ = magnetic momentI = current flowing through the ringr = radius of the ringBy applying the Lorentz force,

the magnetic moment can be calculated as:μ = IAwhere,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopWhen the ring is rotating, the magnetic moment is given by the formula:μ = IA cos(θ)where,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopθ = angle between the magnetic field and the plane of the loopTherefore, the magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.

Learn more about Magnetic moment here,

https://brainly.com/question/27962324

#SPJ11

The force of attraction that a 37.5 μC point charge exerts on a 115 μC point charge has magnitude 3.05 NThe two charges, 37.5 μC and 115 μC, are attracted to each other with a force of magnitude 3.05 N.

Coulomb's law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as:

F = k * (|q1| * |q2|) / r^2

where F is the force of attraction or repulsion, k is the electrostatic constant (k = 8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.

In this case, we have a force of 3.05 N, a charge of 37.5 μC (3.75 × 10^-5 C), and a charge of 115 μC (1.15 × 10^-4 C). We need to find the distance (r) between the charges.

Using Coulomb's law, we can rearrange the formula to solve for the distance:

r = √(k * (|q1| * |q2|) / F)

Substituting the given values:

r = √((8.99 × 10^9 N m^2/C^2) * ((3.75 × 10^-5 C) * (1.15 × 10^-4 C)) / (3.05 N))

Simplifying the expression:

r = √(39.18 m^2)

r ≈ 6.26 m

Therefore, the two charges are approximately 6.26 meters apart.

Learn more about magnitude here:

https://brainly.com/question/31022175

#SPJ11

The angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².

The equation θ = 2.3t + 4.72t² + 1.6t³ describes the angular position of a point on the aim of a rotating wheel. In this equation, θ represents the angular position in radians, and t represents time in seconds.

Angular speed:

The angular speed is the rate of change of angular displacement. It can be calculated by differentiating the angular position equation with respect to time:

ω = dθ/dt = 2.3 + 9.44t + 4.8t²

Angular speed at t = 3.0 s:

Substituting t = 3.0 s into the angular speed equation:

ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(3.0) + 4.8(3.0)² = 73.82 rad/s

Angular speed at t = 5.0 s:

Substituting t = 5.0 s into the angular speed equation:

ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(5.0) + 4.8(5.0)² = 169.5 rad/s

Average angular acceleration:

The average angular acceleration is the change in angular speed per unit time.

α = (ω₂ - ω₁) / (t₂ - t₁)

During the time interval starting at t = 3.0 s and ending at t = 5.0 s,

t₁ = 3.0 s

t₂ = 5.0 s

ω₁ = 73.82 rad/s

ω₂ = 169.5 rad/s

Substituting these values into the average angular acceleration equation:

α = (ω₂ - ω₁) / (t₂ - t₁) = (169.5 - 73.82) / (5.0 - 3.0) = 47.84 rad/s²

Instantaneous angular acceleration:

The instantaneous angular acceleration is the rate of change of angular speed with respect to time. It can be calculated by differentiating the angular speed equation with respect to time:

α = dω/dt = d/dt (2.3 + 9.44t + 4.8t²) = 9.44 + 9.6t

Substituting t = 5.0 s into the instantaneous angular acceleration equation:

α = 9.44 + 9.6t = 9.44 + 9.6(5.0) = 57.44 rad/s²

Therefore, the angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².

Learn more about angular speed at: https://brainly.com/question/25279049

#SPJ11

Hence, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.Answer:Therefore, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.

Consider a single flat circular loop of wire of radius a and resistance R that is immersed in a strong uniform magnetic field. The loop is placed in a plane that is perpendicular to the magnetic field at all times.

Assume that there is no current flowing in the loop initially, however, the magnetic field can change, and it always remains uniform and perpendicular to the plane of the loop.In order to find the total charge that flows past any one point in the loop if the magnetic field changes from Bi to Bf, use the below steps:Step 1: Flux linkage with the loop (Φ) is defined by the equation Φ = BA,

where A is the area of the loop. As the magnetic field changes from Bi to Bf, the flux through the loop will change from Φi = BiA to Φf = BfA.Step 2: From Faraday's law, the emf (ε) induced in the loop is given by ε = -dΦ/dt.Step 3: Using Ohm's law, we have ε = IR, where I is the current in the loop.Step 4: Substituting for ε from step 2 and I from step 3, we get -dΦ/dt = Φ/R or dΦ/Φ = -dt/RStep 5: Integrating from Φi to Φf and from 0 to t, we get ln (Φf/Φi) = -t/R or ln (Φi/Φf) = t/RStep 6: Solving for t,

we get t = -Rln(Φi/Φf)Step 7: The total charge that flows past any one point in the loop is given by Q = It. Substituting for I from step 3 and t from step 6, we get Q = Φi - Φf / R or Q = (Bi - Bf)A/R. Hence, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.Answer:Therefore, the total charge that flows past any one point in the loop is (Bi - Bf)A/.

to know more about charge

https://brainly.com/question/14665331

#SPJ11

The k-component of velocity is 1.76 and the k-component of acceleration is also 1.76 of the particle whose position is defined as 2.71t + 4.269 + 0.88[tex]t^2[/tex]

Given the position function * = 2.71t + 4.269 + 0.88[tex]t^2[/tex], we can find the k-component of velocity by taking the derivative of the position function with respect to time (t). Let's denote the position function as s(t):

s(t) = 2.71t + 4.269 + 0.88[tex]t^2[/tex].

To find the velocity function, we differentiate s(t) with respect to t:

v(t) = ds(t) / dt = d/dt (2.71t + 4.269 + 0.88[tex]t^2[/tex]).

Taking the derivative of each term separately, we have:

v(t) = 2.71 + 1.76t.

The k-component of velocity is simply the coefficient of t, which is 1.76.

To find the k-component of acceleration, we differentiate the velocity function v(t) with respect to t:

a(t) = dv(t) / dt = d/dt (2.71 + 1.76t).

Taking the derivative of each term, we find:

a(t) = 1.76.

Therefore, the k-component of velocity is 1.76 and the k-component of acceleration is also 1.76

Learn more about velocity here :

https://brainly.com/question/30559316

#SPJ11

In the given thermodynamic cycle, the network of the cycle is determined to be -280.52 kJ, and the heat transfer for processes 2-3 is 80 kJ. This cycle is a power cycle because it involves a network output.

To calculate the network of the cycle, we need to determine the work for each process and then sum them up.

For Process 1-2, since the compression occurs with pV = constant, the work done can be calculated using the equation W = p(V₂ - V₁). Substituting the given values, we find W₁₂ = -100 kJ.

For Process 2-3, as it is a constant volume process, no work is done (W₂₃ = 0).

For Process 3-1, as it is a constant-pressure and adiabatic process, no heat transfer occurs (Q₃₁ = 0).

The network of the cycle is the sum of the work for each process, so W_net = W₁₂ + W₂₃ + W₃₁ = -100 kJ + 0 + 0 = -100 kJ.

The heat transfer for processes 2-3 is given as Q₂₃ = 80 kJ.

Since the network output (W_net) is negative, indicating work done by the system, and heat is transferred into the system in processes 2-3, this cycle is a power cycle. In a power cycle, work is done by the system, and heat is transferred into the system to produce a network output.

To know more about the thermodynamic cycle click here:

https://brainly.com/question/30630564

#SPJ11

Centripetal acceleration, which points towards the center of the circle, is responsible for this change in direction. Thus, while the car is traveling at a constant speed, it is still accelerating since the direction of its velocity is constantly changing.

The car has a centripetal acceleration and does not have a constant velocity. Although the car is traveling with a constant speed, it is still accelerating.What is acceleration?Acceleration refers to the rate of change of velocity. Acceleration may be either positive or negative. When an object speeds up, it has positive acceleration.

When an object slows down, it has negative acceleration, which is also known as deceleration. When an object changes direction, it experiences acceleration.A car driving in a circle at a constant speed is an example of uniform circular motion.

The car's direction is constantly changing since it is moving in a circular path. As a result, the car's velocity is constantly changing even if its speed is constant.

Centripetal acceleration, which points towards the center of the circle, is responsible for this change in direction.

Thus, while the car is traveling at a constant speed, it is still accelerating since the direction of its velocity is constantly changing.

to know more about Centripetal

https://brainly.com/question/898360

#SPJ11

A ice skater making 1.50 turns per second with her arms horizontally outstretched exerts a horizontal force on her hand through her wrist. The force required was calculated to be approximately 667 N. This force is equivalent to about 156.9 times the weight of one hand.

a) The force required to maintain circular motion is given by:

F = mv²/r

where m is the mass of the ice skater, v is the speed of the ice skater, and r is the radius of the circular path. In this case, the radius is half the distance between the hands, or 0.75 m. The speed of the ice skater is equal to the circumference of the circular path divided by the period of one revolution:

v = 2πr/T = 2π(0.75 m)/(1.5 s) ≈ 9.42 m/s

The force required is therefore:

F = (56.0 kg)(9.42 m/s)²/(0.75 m) ≈ 667 N

b) To express the force in terms of the weight of her hand, we first need to calculate the weight of one hand:

weight of one hand = (1.25/100)(56.0 kg)/2 ≈ 0.4375 kg

Then, we can express the force as a multiple of the weight of one hand:

F = 667 N ÷ (0.4375 kg x 9.81 m/s²) ≈ 156.9 weight of one hand

Therefore, the horizontal force exerted by her wrist on her hand is approximately 667 N, and this force is equivalent to about 156.9 times the weight of one hand.

To know more about force, visit:
brainly.com/question/31046192
#SPJ11

When an object is thrown from the ground into the air at an angle of 45.0 degrees from the horizontal with a velocity of 20.0 m/s, it will travel a horizontal distance of approximately 40.0 meters.

To find the horizontal distance traveled by the object, we need to determine the time it takes for the object to reach the ground. Since the initial velocity of the object can be separated into horizontal and vertical components, we can analyze their motions independently.

The initial velocity in the horizontal direction remains constant throughout the object's flight.

At an angle of 45.0 degrees,

the horizontal component of the velocity is given by

v_x = v * cos(theta),

where v is

the initial velocity (20.0 m/s) and

theta is the launch angle (45.0 degrees).

Plugging in the values, we find

v_x = 20.0 m/s * cos(45.0) = 14.1 m/s.

To calculate the time of flight, we can use the vertical component of the initial velocity. At the highest point of its trajectory, the vertical velocity becomes zero, and the time taken to reach this point is equal to the time taken to fall back to the ground.

Using kinematic equations, we find

the time of flight (t) to be t = (2 * v_y) / g,

where v_y is the vertical component of the initial velocity and g is the acceleration due to gravity (approximately 9.8 m/s^2).

Substituting the values, we get

t = (2 * 20.0 m/s * sin(45.0)) / 9.8 m/s^2 ≈ 2.04 s.

Finally,

to calculate the horizontal distance (d),

we multiply the time of flight by the horizontal velocity:

d = v_x * t = 14.1 m/s * 2.04 s ≈ 28.8 meters.

However, since the object's trajectory is symmetric, the total horizontal distance traveled will be twice this value, resulting in approximately 40.0 meters.

Learn more about kinematic equations here:

https://brainly.com/question/24458315

#SPJ11

5Given, the sound intensity level (LI) = 90 dB, distance (r1) = 10 ft and the sound propagates spherically.We need to find the sound intensity at the first location I, and sound intensity level LI, at a distance of 20 ft, 40 ft, and 80 ft away from the source.

Using the formula to calculate sound intensity level:LI = 10 log(I/I0)Where I0 is the threshold intensity = 1 x 10^-12 W/m^2.Calculating the sound intensity at the first location I:LI = 10 log(I/I0)90 = 10 log(I/I0)9 = log(I/I0)I/I0 = 10^9I = I0 x 10^9Substituting the value of I0, we get:I = 1 x 10^-12 x 10^9 = 1 W/m^2The sound intensity at the first location I = 1 W/m^2.At 20 feet away from the source:

Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 20 ft.At 20 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (20/10)^2 = 1/4 = 0.25 W/m^2Sound intensity level LI at 20 feet away:LI = 10 log(I/I0)LI = 10 log(0.25/1 x 10^-12)LI = 10 log(2.5 x 10^11)LI = 10 x 11.4 = 114 dBThe sound intensity at 20 feet away I = 0.25 W/m^2 and sound intensity level LI = 114 dB.At 40 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 40 ft.At 40 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (40/10)^2 = 1/16 = 0.0625 W/m^2Sound intensity level LI at 40 feet away:LI = 10 log(I/I0)LI = 10 log(0.0625/1 x 10^-12)LI = 10 log(6.25 x 10^10)LI = 10 x 10.8 = 108 dB

The sound intensity at 40 feet away I = 0.0625 W/m^2 and sound intensity level LI = 108 dB.At 80 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 80 ft.At 80 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (80/10)^2 = 1/64 = 0.015625 W/m^2Sound intensity level LI at 80 feet away:LI = 10 log(I/I0)LI = 10 log(0.015625/1 x 10^-12)LI = 10 log(1.5625 x 10^10)LI = 10 x 10.2 = 102 dBThe sound intensity at 80 feet away I = 0.015625 W/m^2 and sound intensity level LI = 102 dB.Difference in dB at each location:LocationDifference in dBFirst location0 dB20 feet away6 dB40 feet away12 dB80 feet away18 dB

Learn more about Sound here,

https://brainly.com/question/16093793

#SPJ11

Using CMOS-based op-amps, such as those found in modern integrated circuits, offers several advantages over using a traditional BJT-based op-amp like the 741.

Here are some of the advantages of CMOS-based op-amps:

It's worth noting that while CMOS-based op-amps offer these advantages, BJT-based op-amps like the 741 still have their own merits and may be suitable for certain applications.

To learn more about analog-to-digital converters (ADCs) visit: https://brainly.com/question/20856996

#SPJ11

The new charge density [tex]\(p'\)[/tex] of the insulating cylinder, the electric field at point P is set to zero by considering the electric fields due to both the insulating cylinder and the conducting shell. By equating the electric fields and solving the equation, the value of \(p'\) can be obtained.

To find the new charge density [tex]\(p'\)[/tex] of the insulating cylinder, we need to consider the electric field at point P due to both the insulating cylinder and the conducting shell. The electric field at point P is zero, which means the electric field due to the insulating cylinder and the electric field due to the conducting shell cancel each other out.

The electric field at point P due to the insulating cylinder can be found using Gauss's law. Since the cylinder is symmetric and has a uniform charge density, the electric field inside the cylinder is given by  [tex]\(E = \frac{p}{2\epsilon_0}\)[/tex], where [tex]\(\epsilon_0\)[/tex] is the permittivity of free space

The electric field at point P due to the conducting shell is given by [tex]\(E = \frac{\lambda}{2\pi\epsilon_0}\left(\frac{1}{d}-\frac{1}{\sqrt{d^2+(b+c)^2}}\right)\), where \(d\)[/tex]  is the distance from the center of the cylinder.

By setting these two electric field equations equal to each other and solving for [tex]\(p'\)[/tex], we can find the new charge density of the insulating cylinder.

Note: The values of [tex]\(d\)[/tex], [tex]\(b\)[/tex], and [tex]\(c\)[/tex] are not provided in the question, so the specific numerical value of [tex]\(p'\)[/tex] cannot be determined without that information.

To know more about electric field,

https://brainly.com/question/30544719

#SPJ11

A dog is trying to swim across a slow-moving river. The dog has a travel time of 14.07 seconds and a distance of 42.2 meters downstream.

To solve these questions, we can break down the dog's motion into its horizontal and vertical components.

1) To find how long it will take for the dog to get across the stream, we need to calculate the effective velocity of the dog relative to the bank. This can be found using the Pythagorean theorem:

Velocity across the stream = √(Velocity in calm water)^2 + (Velocity of the current)^2

Velocity across the stream = √(2.0 m/s)^2 + (3.0 m/s)^2

Velocity across the stream = √4.0 m^2/s^2 + 9.0 m^2/s^2

Velocity across the stream = √13.0 m^2/s^2

The distance across the stream is 50 m. We can now calculate the time it takes:

Time = Distance / Velocity across the stream

Time = 50 m / √13.0 m^2/s^2

Time ≈ 14.07 seconds

2) To find how far downstream the current will have carried the dog when it reaches the other side, we can use the formula:

Distance downstream = Time × Velocity of the current

Distance downstream = 14.07 seconds × 3.0 m/s

Distance downstream ≈ 42.2 meters

3) The dog's velocity relative to the bank can be found by subtracting the velocity of the current from the velocity in calm water:

Velocity relative to the bank = Velocity in calm water - Velocity of the current

Velocity relative to the bank = 2.0 m/s - 3.0 m/s

Velocity relative to the bank = -1.0 m/s

The negative sign indicates that the dog is swimming against the current, so its velocity relative to the bank is 1.0 m/s in the opposite direction of the current.

Learn more about vertical components here:

https://brainly.com/question/31684355

#SPJ11

To find the capacitance of the capacitor, we can use the formula C = ε₀A/d, where C is the capacitance, ε₀ is the permittivity of free space, A is the area of the plates, and d is the separation distance.

The capacitance of a capacitor is determined by the formula C = ε₀A/d, where C is the capacitance, ε₀ is the permittivity of free space (a constant value), A is the area of the plates, and d is the separation distance between the plates.

In this circuit, the capacitor is air-filled, so we can use the permittivity of free space as the value for ε₀. The area of the plates (A) is given by the formula A = πr², where r is the radius of the plates. The separation distance (d) between the plates is also provided.

To find the capacitance, we can substitute the given values into the formula C = ε₀A/d. Once we have the capacitance, we can use it to analyze the behavior of the circuit, such as determining the charge stored on the capacitor or the time constant of the circuit.

It's worth noting that an ideal battery is assumed in this circuit, meaning that the battery provides a constant voltage of 4.70 V regardless of the current flowing through the circuit.

Learn more about capacitance

https://brainly.com/question/30529897

#SPJ11

After colliding with a 15.0 eV photon, the kinetic energy of an electron on the n=8 level of He+ is 14.77 eV.

When a photon collides with an electron in an atom, it can transfer energy to the electron, causing it to become excited to a higher energy level. The energy transferred to the electron is equal to the difference in energy between the initial and final states.

In this case, the electron is initially on the n=8 level of He+. The energy of the photon is given as 15.0 eV. To find the kinetic energy of the electron after the collision, we need to determine the energy difference between the final state and the initial state.

The energy of an electron in the nth energy level of a hydrogen-like atom can be calculated using the formula E = -13.6/n^2 eV. Plugging in n=8, we find that the initial energy of the electron is -13.6/8^2 = -0.2375 eV. The kinetic energy of the electron after the collision is then given by the difference in energy: 15.0 eV - (-0.2375 eV) = 14.7625 eV. Rounding to two decimal places, we get 14.77 eV, which is the correct answer.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

Given an impulse of 15.4 N, mass of 5.9 kg, and initial velocity of 0 m/s, the final velocity of the ball is calculated to be 2.61 m/s.

For more questions on velocity

https://brainly.com/question/80295

#SPJ8

The Volkswagen Passat's braking system test involved determining the number of tire revolutions and the angular speed of the wheels under specific conditions. a) ≈ 87.53 revolutions b) Angular speed ≈ 8.29 rad/s.

(a) To find the number of revolutions each tire made before the car came to a stop, we can use the relationship between linear motion and rotational motion. The linear distance covered by the car before stopping can be calculated using the equation:

distance = initial velocity² / (2 * acceleration).

Substituting the given values, we find:

distance = (26.2 m/s)² / (2 * 1.90 m/s²) = 179.414 m.

Since each revolution covers a distance equal to the circumference of the tire (2π * radius), we can find the number of revolutions by dividing the distance covered by the circumference of the tire.

The number of revolutions =[tex]distance / (2\pi * radius) = 179.414 m / (2\pi * 0.325 m) \approx 87.53[/tex] revolutions.

(b) To determine the angular speed of the wheels when the car had travelled half the total stopping distance, we need to find the time it took for the car to reach that point. The distance travelled when the car had travelled half the total stopping distance is half of the total distance covered before stopping, which is 179.414 m / 2 = 89.707 m. Using the equation:

[tex]distance = initial velocity * time + (1/2) * acceleration * time^2[/tex]

For solve in time. Rearranging the equation and substituting the given values,

[tex]time = (\sqrt((initial velocity)^2 + 2 * acceleration * distance) - initial velocity) / acceleration[/tex]Substituting the values,

[tex]time = (\sqrt((26.2 m/s)^2 + 2 * 1.90 m/s^2 * 89.707 m) - 26.2 m/s) / 1.90 m/s^2 = 5.28[/tex] seconds.

The angular speed of the wheels can be calculated using the equation:

angular speed = (final angular position - initial angular position)/time.

Since the car travelled half the total stopping distance, the final angular position is half the number of revolutions calculated earlier.

Angular speed = (0.5 * 87.53 revolutions - 0 revolutions) / 5.28 s ≈ 8.29 rad/s.

Learn more about angular speed here:

https://brainly.com/question/29058152

#SPJ11

(a) The tension in the rope is 6,645.5 N.

(b) The magnitude of the force that the floor exerts on the plank is 6,114.3 N.

(a)

The given values are as follows: m = 13.8 kgL = 9.5 mθ = 35°M = 73.0 kgWe need to find the tension in the rope.

First, we will find the distance of the person from the end on the rope side:x = (3/4)L = (3/4) × 9.5 m = 7.125 m

Now, we can find the forces acting on the plank and person.

Let's calculate the force due to gravity acting on the person:

Fg = Mg

Fg = 73.0 kg × 9.8 m/s²

Fg = 715.4 N

The force due to gravity acting on the plank:

Fg' = mg

Fg' = 13.8 kg × 9.8 m/s²

Fg' = 135.24 N

The force exerted by the rope on the plank:

Fr = T

Fr = T sin θ

Fr = T sin 35°

The force exerted by the floor on the plank:

Ff = T cos θ + Fg'

Ff = T cos 35° + Fg'

Ff = T cos 35° + 135.24 N

The forces acting on the person can be represented as:

F1 = FgF1 = 715.4 N

The forces acting on the plank can be represented as:

F2 = T sin 35° + Fg' + Ff

F2 = T sin 35° + 135.24 N + T cos 35°

Now, we can use the equation of torque to find T. The equation of torque is given as follows:Στ = Iα

As the plank is uniform, we can find the moment of inertia of the plank. I = (1/3) mL²I = (1/3) × 13.8 kg × (9.5 m)²I = 929.45 kg m²

As the plank is in equilibrium, the net torque acting on it is zero. Therefore, we can write:

Στ = 0The torque due to the weight of the person:

F1(x/2)The torque due to the weight of the plank:

Fg'(L/2)The torque due to the tension in the rope:

Fr(L - x)Now, we can write the equation of torque:

Στ = F1(x/2) + Fg'(L/2) - Fr(L - x) = 0(715.4 N)(7.125 m/2) + (135.24 N)(9.5 m/2) - T sin 35°(9.5 m - 7.125 m) = 0

Simplify and solve for T:

T sin 35° = (715.4 N)(7.125 m/2) + (135.24 N)(9.5 m/2) - (9.5 m - 7.125 m)(135.24 N)T sin 35° = 3571.69 NT = 6,645.5 N

Therefore, the tension in the rope is 6,645.5 N.

(b) The force exerted by the floor on the plank is given as:

Ff = T cos 35° + Fg'

Ff = (6,645.5 N) cos 35° + 135.24 N

Ff = 6,114.3 N

Therefore, the magnitude of the force that the floor exerts on the plank is 6,114.3 N. Answer: (a) The tension in the rope is 6,645.5 N.

(b) The magnitude of the force that the floor exerts on the plank is 6,114.3 N.

To learn about magnitude here:

https://brainly.com/question/30337362

#SPJ11