Thymine and adenine form a base pair in the DNA molecule. These two bases can form a connection between two strands of DNA via two hydrogen bonds. Which of the following diagrams shows the correct representation of the hydrogen bonding (denoted by dashed lines) between thymine and adenine base pairs? (In each diagram. thymine is shown at the left and adenine is shown at the right. The bases are attached to the backbone portion of the DNA strands.)

Answer:

I think it's B

Explanation:

B is talking about the bees helping the flowers, so that isn't helping the bees but the flowers instead

The final pressure if the final volume is 1. 22 L will be 0.4234 atm

To calculate the final pressure of the hydrogen in the balloon if the final volume is 1.22 L, the ideal gas law can be used. The ideal gas law states that PV = NRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.

Since the number of moles and the temperature is not given, we can assume that they remain constant. So we can use the equation PV = k, where k is a constant.

Given the initial pressure and volume of the hydrogen are 0.95 atm and 0.55 L respectively.

0.95*0.55 = k

so k = 0.5175

then the final pressure can be calculated by:

P1V1 = P2V2

0.950.55 = P21.22

P2 = (0.5175) / (1.22) = 0.4234 atm

The final pressure of the hydrogen in the balloon will be 0.4234 atm.

Learn more about the effect of changing the volume of a gas on its pressure here: https://brainly.com/question/27704299

#SPJ4

Answer:

Kingdom

Explanation:

Out of all the choices, Kingdom is the most inclusive and least specific.

When the question asks for the most inclusive and least specific group, it is asking for the most broad group.

Also, you can just look at the left of the image. It basically shows you the answer.

When mixing and storing materials, volumetric flasks are utilized to determine volumes.

A volumetric flask is a piece of plastic or glass lab equipment used to make solutions. It is applied to prepare a solution with a specific volume. Compared to beakers or Erlenmeyer flasks, volumetric flasks can be used to measure volumes significantly more precisely.

When it's important to know the volume of the mixture being made exactly and properly, a volumetric flask is utilized. Similar to volumetric pipets, the size of a volumetric flask varies according to the solution volume that is being made.

To know more about volumetric flask visit :

https://brainly.com/question/15494897

#SPJ1

Solid silicon and solid magnesium chloride form when silicon tetrachloride gas reacts with magnesium metal. the equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

When the solid silicon react with the solid magnesium chloride , the word equation is :SiCl₄(g)  +  Mg(s)  

the product formed is the silicon tetrachloride gas. the word equation is :

Si(s)  +  MgCl₂(s)

The unbalanced equation is :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

The balanced equation for the reaction of the silicon tetra chloride react with the magnesium   and form the silicon  and the solid magnesium chloride.  and t is given :

SiCl₄(g)  +  Mg(s)   --->  Si(s)  +  MgCl₂(s)

To learn more about silicon here

https://brainly.com/question/2571347

#SPJ4

Answer:

CO₂H

Explanation:

The empirical formula gives the smallest whole number ratio of atoms of each element in a compound.

The ratio of hydrogen, carbon and oxygen in H₂C₂O₄ is:

H : C : O

2 : 2 : 4

They have a common factor of 2, so we can divide the atoms of each element by 2:

H : C : O

1 : 1 : 2

This gives us HCO₂ or CO₂H

Answer:

d thermal kinetic energy

When nitroglycerin (C3H50N309) is detonated, the carbon and hydrogen atoms bonded to oxygen and nitrogen. The type of energy is thermal kinetic energy.

Thermal energy is the total of potential energy and kinetic energy. Kinetic energy is the energy used in doing a work.

Thermal energy is the form of heat, it can be both potential and kinetic. In the reaction, the heat is releasing, so it's a thermal kinetic energy.

Thus, the correct option is d. Thermal kinetic energy.

Learn more about Thermal kinetic energy

https://brainly.com/question/1396546

#SPJ2

a weak acid. The Ka (acid dissociation constant) is a measure of the strength of an hydrofluoric acid in solution. It is defined as the equilibrium constant for the dissociation reaction of the acid in water,.

which is usually written as:

HA + H2O → H3O+ + A-

A lower Ka value indicates that the acid is a weak acid, meaning that it does not dissociate very well in water and thus has a low concentration of H3O+ ions. A higher Ka value indicates that the hydrofluoric acid is a strong acid, meaning that it dissociates very well in water and thus has a high concentration of H3O+ ions. Given that the Ka for hydrofluoric acid is 7.2 x 10-4, this means that hydrofluoric acid is a weak acid. This means that it does not dissociate very well in water and thus has a low concentration of H3O+ ions. It is a weaker acid than the strong acids like Hydrochloric acid, Sulfuric acid, Nitric acid and many others.

Learn more about Ka here:

https://brainly.com/question/1417688

#SPJ4

The final enthalpy of the overall chemical equation is -475.9KJ. and 2nd step must occur to calculate the final enthalpy.

Enthalpy depends only on the system's composition, temperature, and pressure; it is unaffected by the system's history. It is a quality or state function that resembles energy and has energy-like properties (and is thus measured in units of joules or ergs).

1st equation

C(s) + O₂ → CO₂ ΔH₁ = - 393.5KJ

2nd equation

CO + O₂ → 2CO₂ ΔH₂ = -566.0KJ

3rd equation

2H₂O → 2H₂ + O₂ ΔH₃ = 483.6KJ

Overall chemical equation is

C(s) + H₂ + O→ CO(g) + H₂(g)

The overall chemical equation's final enthalpy is

ΔH = ΔH₁ + ΔH₂ + ΔH₃

ΔH =  - 393.5 -566.0 + 483.6

ΔH = -959.5 + 475.9

ΔH = -475.9KJ.

To know more about enthalpy visit:

https://brainly.com/question/13996238

#SPJ4

Reactions that are reversible have the ability to move both forward and backward. Reactants change into products in a reversible reaction, but products can also change back into reactants.

In actuality, the opposing reaction as well as the forward reaction will occur simultaneously. In some chemical reactions, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D. Only in one direction can irreversible chemical reactions take place. Reactants can transform into products, while products cannot transform back into reactants. Chemical reactions that can be reversed can happen both ways. The products can change back into the reactants, and the reactants can change back into the products.

Learn more about chemical :

brainly.com/question/70429

#SPJ4

Diatomic elements are molecules composed of two atoms of the same element covalently bonded together, as opposed to other elements which are composed of only one atom.

Diatomic elements are those elements that exist in nature as molecules made up of two atoms. Examples of diatomic elements include oxygen (O2), hydrogen (H2), nitrogen (N2), fluorine (F2), chlorine (Cl2), and iodine (I2). These elements are the only elements that exist naturally as diatomic molecules.

This gives diatomic elements distinct properties compared to other elemental substances, such as having two different electron configurations, and having different spin states. Diatomic elements also have properties that are unique to them, such as having different boiling points, higher densities, and different reactivity. Additionally, diatomic elements are essential for life as many are used in crucial biochemical processes.

To know more about Diatomic elements click-

https://brainly.com/question/29078214
#SPJ4

Answer:

186.25

Explanation:

KCL= 74.5 (molar mass)

2.5*74.5= 186.25

Answer:

it’s 4

Explanation:

Ferric oxide, is the product that is formed when iron undergoes oxidation

Upon reacting with oxygen, iron will be oxidized to either the +3 oxidation state in iron (III) oxide, or to a combination of the +2 and +3 oxidation states in iron (II, III) oxide.The balanced chemical equations for these reactions look like this

#4”Fe”_text((s]) + 3”O”_text(2(g]) -> 2”Fe”””_2”O”_text(3(s])#

And

#3”Fe”_text((s]) + 2”O”_text(2(g]) -> “Fe”””_3”O”_text(4(s])#

The first compound, iron (III) oxide, also called ferric oxide, is dark red/brown in color

While the second compound, iron (II, III) oxide, also called ferrous ferric oxide, is dark brown/black in color.The [Fe(H2O)6]3+ ion is colorless (or pale pink), but many solutions containing this ion are yellow or amber-colored because of hydrolysis.

To learn more about chemical equation to refer:

https://brainly.com/question/30087623

#SPJ1

Answer:

C. 7370 joules.

Explanation:

There is a mistake in the statement. Correct form is described below:

Using the above data table and graph, calculate the total energy in Joules required to raise the temperature of 15 grams of ice at -5.00 °C to water at 35 °C.

The total energy needed to raise the temperature is the combination of latent and sensible heats, all measured in joules, and represented by the following model:

[tex]Q = m\cdot [c_{i} \cdot (T_{2}-T_{1})+L_{f} + c_{w}\cdot (T_{3}-T_{2})][/tex] (1)

Where:

[tex]m[/tex] - Mass of the sample, in grams.

[tex]c_{i}[/tex] - Specific heat of ice, in joules per gram-degree Celsius.

[tex]c_{w}[/tex] - Specific heat of water, in joules per gram-degree Celsius.

[tex]L_{f}[/tex] - Latent heat of fusion, in joules per gram.

[tex]T_{1}[/tex] - Initial temperature of the sample, in degrees Celsius.

[tex]T_{2}[/tex] - Melting point of water, in degrees Celsius.

[tex]T_{3}[/tex] - Final temperature of water, in degrees Celsius.

[tex]Q[/tex] - Total energy, in joules.

If we know that [tex]m = 15\,g[/tex], [tex]c_{i} = 2.06\,\frac{J}{g\cdot ^{\circ}C}[/tex], [tex]c_{w} = 4.184\,\frac{J}{g\cdot ^{\circ}C}[/tex], [tex]L_{f} = 334.72\,\frac{J}{g}[/tex], [tex]T_{1} = -5\,^{\circ}C[/tex], [tex]T_{2} = 0\,^{\circ}C[/tex] and [tex]T_{3} = 35\,^{\circ}C[/tex], then the final energy to raise the temperature of the sample is:

[tex]Q = (15\,g)\cdot \left[\left(2.06\,\frac{J}{g\cdot ^{\circ}C} \right)\cdot (5\,^{\circ}C)+ 334.72\,\frac{J}{g} + \left(4.184\,\frac{J}{g\cdot ^{\circ}C}\right)\cdot (35\,^{\circ}C) \right][/tex]

[tex]Q = 7371.9\,J[/tex]

Hence, the correct answer is C.

The estimated time of death is approximately 10:30 pm the night before.

Estimating the time of death (TOD) can be a complex process, and the methods used will depend on the specific circumstances of the case. Some of the factors that may be taken into consideration include:

It is important to note that estimating the TOD is not an exact science and there are often significant margins of error. A professional forensic examination is typically needed to determine the TOD.

Learn more about TOD here:

https://brainly.com/question/29329824

#SPJ4

Answer:

500ml

Explanation:

because 100 ×2 is 200 and the 300

500ml

Your limiting reagent will be copper (II) chloride. The mole ratio is the most crucial tool you'll have to tackle this problem, or any other stoichiometry problem, for that matter.

Keep in mind that in order to make 3 moles of copper from 3 moles of copper (II) chloride, you need 2 moles of aluminum. Unbalanced reaction: Al(s)+HCl(aq) AlCl3(aq)+H2(g). Cl. Balance On the product side there are three Cl atoms and on the reactant side there is one. There is only one hydrogen atom on the reactant side and two on the product side of the reaction Mg + HCl MgCl 2 + H 2. The equation is therefore unbalanced.

Learn more about reagent here-

https://brainly.com/question/28196410

#SPJ4

Answer: i don't know

Explanation:

Geometry for the complex ion [Co(en)(H2O)4]2+ that are possible is : Octahedral.

A compound with six atoms or groups of atoms or ligands grouped symmetrically around a central atom and defining the vertices of the octahedron represents the shape of an octahedron in chemistry and is known as an octahedral molecular geometry (also known as a square bipyramid).

The prefix is octa because the octahedron has eight faces. Octahedral bond angle values between 90° and 180° are what determine the octahedral shape. The angles between each of the four atoms that make up the square bases of the two pyramids of the octahedral structure and one of the apex atoms are both 90 degrees.

To know more about octahedral geometry , refer

https://brainly.com/question/29031085

#SPJ4

Answer:

There are 8.30x104-24 atoms of oxygen in 2.50 mol of oxygen gas. There are 7.53x10*23 atoms of oxygen in 2.50 mol of oxygen gas.

0.384 moles of nitrogen atoms are inhales by the person in an average breath of air.

Avogadro constant is the number of molecules present in 1 mole of gas or a chemical compound. It is used to specify the atomic mass of a certain number of molecules in a substance or chemical compound or gas, in grams. Theses molecules may be atoms, neutron, proton, electron, etc. One mole of a substance contains 6.023 × 10²³ Molecules. In other words the atomic mass of a substance is the weight of 6.023 × 10²³ molecules.

So 2.31 × 10²³ atoms of nitrogen = (2.31 × 10²³)/(6.023 × 10²³)

= 0.384 moles

To know more about nitrogen, here

https://brainly.com/question/16711904

#SPJ4

The element with 14 protons 14 neutrons and 14 electrons is Silicon

Protons and neutrons can both be found in the nucleus of an atom of any chemical element. These subatomic particles add up to give the atom's atomic mass. The characteristic that distinguishes isotopes of different elements from one another is their atomic mass.

Z, the atomic number, is 14 if there are 14 protons. Z being the quantity of large positively charged nuclear particles by definition. And Z establishes the atom's identity; if Z = 14,we can find on periodic table element that have atomic number 14 is silicon,

Therefore element with 14 protons 14 neutrons and 14 electrons is Silicon

Learn more about atomic number at https://brainly.com/question/1379579

#SPJ4

Protons, neutrons and electrons that carbon-14 have if it has a neutral charge is 6 electrons, 8 neutron, and 6 proton.

The total of an element's protons plus neutrons is that element's mass number. One atomic mass unit, or amu, roughly equals the weight of neutrons and protons. While atomic number equal to proton and electron.

The proton can be calculate as follows:

C−14 has atomic no = 6 and mass no = 14.

so

No of electrons = No of protons = atomic no = 6

No of neutron = mass no-atomic no = 14−6=8

Therefore,  Protons, neutrons, and electrons that carbon-14 have if it has a neutral charge is 6 electrons, 8 neutron, and 6 proton.

Learn more about atom at https://brainly.com/question/886387

#SPJ4

Answer:

a. A compound can be a pure substance.

b. A compound can be isolated.

Explanation:

a. A compound can be a pure substance.

This is because a compound which is made up of two or more atoms is also a pure substance since, a pure substance is a substance that contains only one type of matter - that is, it is in a single phase of matter.

Examples of compounds include water (H₂O) and ammonia (NH₃)

b. A compound can be isolated.

This is because, since it is a pure substance, it has unique properties which distinguish it from other compounds.

Answer:

virgil Cassidy n.v

Christian doctorbbn nnn

Explanation:

Verizon mlm

Answer:

Think sorry if i did it wrong The molar mass that is the mass of 6.022 X 1023 atoms of helium is 4g. Hence 1 mole of He = 4 g of He = 6.022 X 1023atoms of He. 1 g of He = (6.022 X 1023) / 4 atoms of He. 52 g of He = (6.022 X 1023X 52 ) / 4 atoms of He.

For Helium,

Number of atoms=Number of moles ×6.022×1023

No of Moles = 6.022×10

2312.044×10

23 = 2.

Now, atomic mass of He=4

Weight = 2×4 = 8 g

The molar mass that is the mass of 6.022 X 1023 atoms of helium is 4g. Hence 1 mole of He = 4 g of He = 6.022 X 1023atoms of He. 1 g of He = (6.022 X 1023) / 4 atoms of He. 52 g of He = (6.022 X 1023X 52 ) / 4 atoms of He.

As we know, gram atoms = gram mole

here, no of moles = 23/46 =2 so no of gram atoms are 2.

Explanation:

MARK ME AS A BRAINLEIST

AND FOLLOW ME AND THANKS MY ANSWER PLEASE

THANKS  

0

0.0

(0 votes)

Still have questions?

FIND MORE ANSWERS

ASK YOUR QUESTION

New questions in Chemistry

write the molecular formula and name given in the picture​

In determination of Calcium Gluconate, pH required is​

precision is related to the​

mai apne poiñts khud le rha hu (≧▽≦)(≧▽≦) kisi ko chahiye kya​

check the attached picture identify and write the structures of A, B and C in the following reaction.​

-2, विक्षेपण तथा विक्षेण क्षमता का समझाइये। Explain Dispersion and Dispersive power.​

which of the following elements does not lose an electron easily? a)Na b)F c)Mg d)Al ​

WRITE THE MOLECULAR FORMULA ND THE NAME OF:​

then oppa for us for me also ur cute my mangodolly oppa mangodolly=(aamras)​

write IUPSC name of C2H5 | C2H5 - C - C2H5 | C2H5 check the attached picture​

Sex___Girls___Join___Fast_____ hts-rrqq-jtw​

c.o.m.e. h.e.r.e. t.o h.a.v.e f.un jta-yhpx-hkp what is a chemical reaction?

Why is 6-decene not possible? What would it be called? Draw it.

If alkaline solution we have chromate ions and in acidic solution we have dichromate ions back explain the reason

What is the meaning of stp

H ey gi rl s co me t o ha ve f un an d s ex.. uvk-yuow-ubr..

यह नोएडा टू है प्रेसिपिटेशन 2 सॉल्यूशन शोल्ड बे​

27. Identify the type of each of the following reactions stating reason for your answers : Heat (A) 2FeSO4(s) → Fe2O3(s) + SO2(g) + SO3(9) (B) CuSO4(a…

state modern periodic law. what is long form of periodic table? what are its main features? how is it superior to Mendeleev's table?​

सोडियम क्लोराइड फॉर्म बाय​

Answer:

Soluble

Salt is soulble is water

Explanation:

Solubility although similar just means how easily it will disolve somthing that isnt soluble in one thing still has solubility

The number of moles of the aluminum oxide that is produced is 4.5 moles.

We have to look at the stoichiometry of the reaction. In this case, we can see that there is a combination between the aluminum and the oxygen and then we have a product as have been shown in the equation that we have in the question.

From the equation, we know that;

4 moles of oxygen produces 2 moles of aluminum oxide

9 moles of oxygen produces x moles of aluminum oxide

x = 9 * 2/4

x = 4.5 moles

Learn more about stoichiometry:https://brainly.com/question/30218216

#SPJ1

Answer: its actually 4

Explanation: