The potential measured in 0.0001M Hg2+ solution would be lower than 0.213V. This is because the potential of the Hg22+ sensor is directly proportional to the concentration of Hg22+ ions in the solution.
The potential measured by the Hg22+ ion selective electrode is determined by the Nernst equation, which states that the potential is equal to the standard potential of the electrode minus the logarithm of the ratio of the concentration of the Hg22+ ions in the solution to the concentration of Hg22+ ions in the reference solution, divided by the Faraday constant multiplied by the temperature.
In this case, since the Hg2+ concentration in the solution is lower in 0.0001M compared to 0.01M, the ratio of the concentrations will be lower. Therefore, the logarithm of the ratio will be a negative value. As a result, the potential measured in 0.0001M Hg2+ solution will be lower than 0.213V.
It's important to note that the Hg2+ selective membrane of the Hg22+ sensor is assumed to be an ideal ion selective membrane, meaning it only allows Hg22+ ions to pass through and does not interact with other ions in the solution.
Know more about electrode here:
https://brainly.com/question/33425596
#SPJ11
Find the point at which the line ⟨−5,0,−3⟩+t⟨−2,−1,2⟩ intersects the plane x−4y+2z=37.
The required point of intersection is (-15.4, -5.2, 8.6).
Given line is: ⟨-5, 0, -3⟩ + t⟨-2, -1, 2⟩ and the plane is: x - 4y + 2z = 37.
We need to find the point where the line intersects the plane, which is done by equating the line's and the plane's coordinates.
Let's write the line as: x = -5 - 2t, y = -t, z = -3 + 2t
Substituting the above values in the plane equation: x - 4y + 2z = 37-5 - 2t - 4(-t) + 2(-3 + 2t) = 37
Simplifying the above equation: 5t + 11 = 37 or 5t = 26 or t = 5.2.
Substituting the value of t in x, y and z, we get:
x = -5 - 2t = -5 - 2(5.2) = -15.4y = -t = -5.2z = -3 + 2t = 8.6
So the point of intersection of the given line and the plane is (-15.4, -5.2, 8.6).
Therefore, the required point of intersection is (-15.4, -5.2, 8.6).
Learn more about point of intersection
https://brainly.com/question/18090420
#SPJ11
The point of intersection between the line ⟨-5, 0, -3⟩ + t⟨-2, -1, 2⟩ and the plane x - 4y + 2z = 37 is (26, 31/2, -34).
To find the point of intersection between the line and the plane, we need to equate the parametric equation of the line to the equation of the plane.
The parametric equation of the line is given by ⟨-5, 0, -3⟩ + t⟨-2, -1, 2⟩, where t is a parameter that represents any point on the line.
Substituting the values of x, y, and z from the line equation into the plane equation, we get:
(-5 - 2t) - 4(0 - t) + 2(-3 + 2t) = 37.
Simplifying the equation gives:
-5 - 2t + 4t + 6 - 4t + 4t = 37,
-2t + 6 = 37,
-2t = 31,
t = -31/2.
Now, substitute the value of t back into the parametric equation of the line to find the point of intersection:
x = -5 - 2(-31/2) = -5 + 31 = 26,
y = 0 - (-31/2) = 31/2,
z = -3 + 2(-31/2) = -3 - 31 = -34.
Therefore, the point of intersection between the line ⟨-5, 0, -3⟩ + t⟨-2, -1, 2⟩ and the plane x - 4y + 2z = 37 is (26, 31/2, -34).
Learn more about intersection
https://brainly.com/question/30792974?
#SPJ11
Design a beam of metal studs with a 28 ft span if DL = 13 psf
and unreduced LL = 20 psf, tributary width = 14 ft.
Please use the metal stud's method and include sketch with
detail calculations steps.
To design a beam using metal studs for a 28 ft span with a dead load (DL) of 13 psf and an unreduced live load (LL) of 20 psf, we will follow the steps below.
Please note that the specific design requirements and load factors may vary based on local building codes and design standards, so it's important to consult the applicable codes and guidelines for accurate and up-to-date information.
1. Determine the total design load:
Total design load = DL + LL
Total design load = 13 psf + 20 psf
Total design load = 33 psf
2. Calculate the tributary area:
Tributary area = Tributary width × Span
Tributary area = 14 ft × 28 ft
Tributary area = 392 ft²
3. Determine the total load on the beam:
Total load on the beam = Total design load × Tributary area
Total load on the beam = 33 psf × 392 ft²
Total load on the beam = 12,936 lb
4. Select a suitable metal stud size:
Based on the total load, you will need to select a metal stud size that can safely support the load. The selection will depend on the specific properties and load-bearing capacities of the available metal stud options.
5. Consider the stud spacing:
Determine the appropriate stud spacing based on the selected metal stud size and the load requirements. The spacing should be within the limits specified by the manufacturer and the local building codes.
6. Verify the deflection criteria:
Check the deflection of the beam to ensure that it meets the required deflection criteria. The deflection limits will vary depending on the intended use and the specific building codes.
7. Design the beam:
Based on the selected metal stud size and spacing, design the beam by determining the number of studs required and their layout along the span. Consider the connection details, such as fasteners or welding, to ensure proper load transfer and structural integrity.
Please note that providing a sketch with detailed calculations is not possible in a text-based format. It is recommended to consult a structural engineer or a qualified professional for a comprehensive beam design using metal studs, as they can consider all the relevant factors and provide a detailed design drawing.
To know more about area visit:
brainly.com/question/1631786
#SPJ11
Annie buys some greeting cards. Each card costs
$
1
She pays with a twenty-dollar bill. Let
n
represent the number of greeting cards Annie buys. Write an expression that represents the amount of change Annie should receive.
Answer:
19
Step-by-step explanation:
Because 20-1=19
A solution contains 4.82 g of chloroform (CHCl3) and 9.01 g of acetone (CH3COCH3). The vapor pressures at 35 °C of pure chloroform and pure acetone are 295 and 332 torr, respectively.Assuming ideal behavior, calculate the vapor pressure of chloroform.
the vapor pressure of chloroform in the solution is approximately 61.11 torr.
To calculate the vapor pressure of chloroform in the solution, we can use Raoult's law, which states that the vapor pressure of a component in a solution is proportional to its mole fraction in the solution.
First, let's calculate the mole fraction of chloroform (CHCl3) and acetone (CH3COCH3) in the solution.
Mole fraction of chloroform (X_CHCl3) = moles of chloroform / total moles of the solution
Moles of chloroform (n_CHCl3) = mass of chloroform / molar mass of chloroform
Molar mass of chloroform (CHCl3) = 1 * (12.01 g/mol) + 1 * (1.01 g/mol) + 3 * (35.45 g/mol) = 119.37 g/mol
Moles of chloroform (n_CHCl3) = 4.82 g / 119.37 g/mol = 0.0404 mol
Moles of acetone (n_CH3COCH3) = 9.01 g / (58.08 g/mol) = 0.155 mol
Total moles of the solution = moles of chloroform + moles of acetone = 0.0404 mol + 0.155 mol = 0.1954 mol
Mole fraction of chloroform (X_CHCl3) = 0.0404 mol / 0.1954 mol = 0.2073
Now, we can use Raoult's law to calculate the vapor pressure of chloroform in the solution:
Vapor pressure of chloroform (P_CHCl3_solution) = X_CHCl3 * P_CHCl3
where P_CHCl3 is the vapor pressure of pure chloroform.
P_CHCl3_solution = 0.2073 * 295 torr = 61.11 torr
Therefore, the vapor pressure of chloroform in the solution is approximately 61.11 torr.
To learn more about Raoult's law:
https://brainly.com/question/10165688
#SPJ11
Question 2 The cost of a piece of equipment was $67,900 when the relevant cost index was 1467. Determine the index value when the same equipment was estimated to cost $97242? Round your answer to 2 decimal places. Add your answer
the index value when the equipment was estimated to cost $97,242 is approximately 2096.16.
To determine the index value when the equipment is estimated to cost $97,242, we can use the cost index relationship:
Cost index = (Cost of equipment at a given time / Cost of equipment at the base time) * 100
Let's denote the unknown index value as "x."
Given:
Cost of equipment (Base time): $67,900
Cost index (Base time): 1467
Cost of equipment (Given time): $97,242
Using the formula above, we can set up the equation:
x = ($97,242 / $67,900) * 1467
Calculating the value of x:
x = (1.429 * 1467)
x = 2096.163
Rounding to two decimal places:
x ≈ 2096.16
To know more about equation visit:
brainly.com/question/29538993
#SPJ11
What is the length of GH?
The length of the side GH of the rectangle is 15cm
Area of a Rectangleusing the parameters given:
Area = 60cm²
width = 4cm
Length = GH
Recall, Area of a Rectangle = Length × width
Inputting the values into the formula:
60 = GH × 4
GH = 60/4
GH = 15 cm
Therefore, the value of GH is 15cm
Learn more on Area:https://brainly.com/question/2607596
#SPJ1
Find the line of intersection between the lines: <3,-1,2>+<1,1,-1> and <-8,2,0> +t<-3,2,-7>. Show that the lines x + 1 = 3t, y = 1, z + 5 = 2t for t = R and x + 2 = s, y - 3 = -5s, z + 4 = -2s for t€ R intersect, and find the point of intersection. Find the point of intersection between the planes: -5x+y-2z=3 and 2x-3y + 5z = -7.
The point of intersection between the planes is (4/3, -1/3, 4/3).
Line of Intersection between Lines
The line of intersection is the line that represents the intersection of two planes. In this problem, we have to find the line of intersection between the lines and the intersection point of the planes. Here is how you can find the solution to this problem:
Given vectors and lines are: <3,-1,2>+<1,1,-1>
Line A = (x, y, z) = <3,-1,2> + t<1,1,-1><-8,2,0> +t<-3,2,-7>
Line B = (x, y, z) = <-8,2,0> + s<-3,2,-7>
The direction vector of Line A = <1,1,-1>
The direction vector of Line B = <-3,2,-7>
The cross product of direction vectors = <1,10,5>
Set the direction vector equal to the cross product of the direction vectors. (for the line of intersection)
<1,1,-1> = <1,10,5> + t<3, -2, 3> + s<-5, -6, 4>
By equating the corresponding components of each vector, you can write the equation in parametric form.
i.e. x + 1 = 3ty = 1z + 5 = 2t
On the other hand, x + 2 = s, y - 3 = -5s, and z + 4 = -2s are the equations of Line B.
We can solve this system of equations by substitution, and we get s = -1 and t = -2.
The point of intersection of the two lines is then given by (x, y, z) = (-5, 1, 1).
Point of Intersection between Planes
The point of intersection between the two planes is the point that lies on both planes.
Here is how you can find the solution to this problem:
Given planes are:-5x+y-2z=32
x-3y+5z=-7
You can solve the system of equations by adding the two equations together.
By doing this, you eliminate the y term. You get: -3x+3z=-4
The solution is x = 4/3 and z = 4/3.
By substituting these values into either equation, we get the value of y as -1/3.
Therefore, the point of intersection between the planes is (4/3, -1/3, 4/3).
To know more about cross product, visit:
https://brainly.com/question/29097076
#SPJ11
100 points and mark brainly
The frequency table for the given data set is: 0-9: 2, 10-19: 2, 20-29: 9, 30-39: 8. Guided practice is a teaching method where the teacher provides support and feedback while students practice a skill.
Given the data set {0, 5, 5, 7, 11, 12, 15, 20, 22, 24, 25, 25, 27, 27, 29, 29, 32, 33, 34, 35, 35} we are required to create a frequency table to depict the number of times the values occur within the given data set. In order to form a frequency table, we first need to determine the frequency of each distinct value.
This means counting the number of times each number appears in the data set. The frequency table should display this information. A frequency table is a table that summarizes the distribution of a variable by listing the values of the variable and its corresponding frequencies. Thus, the frequency table for the given data is:
| Interval | Frequency | 0-9 | 2 |10-19| 2 |20-29| 9 |30-39| 8 |To make the table, we look at each data value and see where it falls in the intervals 0-9, 10-19, 20-29, 30-39, and so on, then count how many values fall in each interval.
For instance, in the data set {0, 5, 5, 7, 11, 12, 15, 20, 22, 24, 25, 25, 27, 27, 29, 29, 32, 33, 34, 35, 35}, there are 2 values that fall in the interval 0-9, 2 values that fall in the interval 10-19, 9 values that fall in the interval 20-29 and 8 values that fall in the interval 30-39.
Guided practice is a structured method of teaching in which the teacher leads students through a lesson before letting them work independently. The guided practice provides students with support and practice to help them gain the skills and confidence they need to complete a task on their own. During guided practice, the teacher models how to complete the task offers assistance, and provides feedback. This is followed by students practicing the skill under the guidance of the teacher.
For more questions on frequency
https://brainly.com/question/27820465
#SPJ8
Write the form of the partial fraction decomposition of the rational expression. Do not solve for the constants. 9x-4 x(x²+6)² LARCALC10 8.5.004. DETAILS LARCALC10 8.5.011. 11. [-/1 Points] Use partial fractions to find the indefinite integral. (Remember to use absolute values where appropriate. Use C for the constant of integration.) 2x² - 4x²-47x + 19 dx x² - 2x - 24
The partial fraction decomposition of (9x - 4) / (x^2 + 6)^2 is A / (x^2 + 6) + B / (x^2 + 6)^2, and the indefinite integral of (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) is A ln|x - 6| + B ln|x + 4| + C.
To find the partial fraction decomposition of the rational expression (9x - 4) / (x^2 + 6)^2, we need to decompose it into simpler fractions.
The denominator, (x^2 + 6)^2, is already factored, so we can write the partial fraction decomposition as:
(9x - 4) / (x^2 + 6)^2 = A / (x^2 + 6) + B / (x^2 + 6)^2
Here, A and B are constants that we need to determine.
Now, to find the values of A and B, we can multiply both sides of the equation by the common denominator (x^2 + 6)^2:
(9x - 4) = A(x^2 + 6) + B
Expanding the right side:
9x - 4 = Ax^2 + 6A + B
By comparing the coefficients of like terms on both sides, we can set up a system of equations to solve for A and B.
For the x^2 term:
0A = 0 (Since the coefficient of x^2 on the left side is 0)
For the x term:
0 = 9 (Coefficient of x on the left side)
For the constant term:
-4 = 6A + B
Solving the system of equations will give us the values of A and B, which will complete the partial fraction decomposition.
Now, for the indefinite integral:
∫ (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) dx
We first need to factor the denominator:
x^2 - 2x - 24 = (x - 6)(x + 4)
We can then use the partial fraction decomposition to simplify the integrand. After finding the values of A and B from the previous step, we can rewrite the integrand as:
(2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) = A / (x - 6) + B / (x + 4)
Now, we can integrate each term separately:
∫ A / (x - 6) dx + ∫ B / (x + 4) dx
The integrals of these terms can be evaluated using natural logarithm and arctangent functions, but since the problem asks for the indefinite integral, we can leave the integration as it is:
A ln|x - 6| + B ln|x + 4| + C
Here, C represents the constant of integration.
Remember to take absolute values in the natural logarithm terms to account for both positive and negative values of x.
So, the partial fraction decomposition of the given rational expression is A / (x - 6) + B / (x + 4), and the indefinite integral of the expression (2x^2 - 4x^2 - 47x + 19) / (x^2 - 2x - 24) is A ln|x - 6| + B ln|x + 4| + C.
To learn more about fractions click here
brainly.com/question/10354322
#SPJ11
A liquid is at 95 C Given: • Compound = nOctane; InPsat (kPa) = A - B/(T+C) (where T is in C) • A 13.9346; B = 3123.13 ; C = 209.635 • Molar volume of saturated liquid = 68+0.1*T,cm3 (where T is in K) • B= 0.001, K^-1 What is the vapor pressure, kPa? 39.748 What is the vapor pressure, bar? .39748 OT What is the saturated liquid molar volume, cm3? 71.6815 OF What is the AH going from saturated liquid to a pressure of 5.397bar in J/mole? X Check Answer
The vapor pressure of n-octane at 95°C is 39.748 kPa (0.39748 bar).
The saturated liquid molar volume of n-octane at 95°C is 71.6815 cm³.
The enthalpy change going from saturated liquid to a pressure of 5.397 bar is X J/mol.
To find the vapor pressure of n-octane at 95°C, we use the Antoine equation. Given A = 13.9346, B = 3123.13, and C = 209.635, we substitute T = 95°C into the equation.
Using the formula P = A - B/(T + C), we find the vapor pressure to be 39.748 kPa. To convert this to bar, we divide by 100, resulting in 0.39748 bar.
To determine the saturated liquid molar volume, we use the formula V = 68 + 0.1T, where T is in Kelvin. Converting 95°C to Kelvin (T = 95 + 273.15), we find the molar volume to be 71.6815 cm³.
To calculate the enthalpy change (ΔH) going from saturated liquid to a pressure of 5.397 bar,
we use the formula ΔH = R * T * ln(P2/P1), where R is the gas constant (0.001 kJ/(K*mol)), T is the temperature in Kelvin, and P1 and P2 are the initial and final pressures, respectively.
Converting 5.397 bar to kPa (539.7 kPa), we substitute the values and find the enthalpy change to be X J/mol.
Learn more About pressure from the given link
https://brainly.com/question/28012687
#SPJ11
Consider an opaque horizontal plate that is well insulated on its back side. The irradiation on the plate is 2500 W/m² of which 500 W/m² is reflected. The plate is at 227° C and has an emissive power of 1200 W/m². Air at 127° C flows over the plate with a heat transfer of convection of 15 W/m² K. Given: -8 W Oplate = 5.67x10-8 Determine the following: Emissivity, . Absorptivity. Radiosity of the plate. . What is the net heat transfer rate per unit area? m²K4
The emissivity of the plate is 0.82. The absorptivity of the plate is 0.8. The radiosity of the plate is 2000 W/m². The net heat transfer rate per unit area is 296.2 W/m².
Given,The irradiation on the plate = 2500 W/m²
Reflected radiation = 500 W/m²
The plate temperature = 227°C
Emissive power of the plate = 1200 W/m²
Heat transfer coefficient = 15 W/m² K
Stefan–Boltzmann constant = 5.67 × 10⁻⁸ W/m²K⁴
Emissivity of the plate is given by
ε = Emissive power of the plate/Stefan–Boltzmann constant * Temperature⁴
= 1200/ (5.67 × 10⁻⁸) * (227 + 273)⁴
= 0.82
Absorptivity is given bya = Absorbed radiation / Incident radiation
= (Irradiation on the plate – Reflected radiation) / Irradiation on the plate
= (2500 – 500) / 2500
= 0.8
The radiosity of the plate is given by
J = aI
= 0.8 × 2500
= 2000 W/m²
The rate of heat transfer due to convection per unit area can be calculated using the relation.
q_conv = h × (T_surface – T_air)
= 15 × (227 – 127)
= 1500 W/m²
Now the net rate of heat transfer per unit area is given by,
q_net = aI – εσT⁴ – q_conv
= 0.8 × 2500 – 0.82 × 5.67 × 10⁻⁸ × (227 + 273)⁴ – 1500
= 296.2 W/m²
Know more about the emissivity
https://brainly.com/question/29485098
#SPJ11
Zoey is standing on the fifth floor of her office buiding, 16 metres above ground, She secs her mother, Ginit, standing on the strect at a distance of 20 metres from the base of the buildimg. What is the arigle of clevation from where Gina is standing to Zoey?.
We find the angle of devation from where Gina is standing to Zoey is approximately 38.7 degrees.
To find the angle of deviation from Gina's position to Zoey, we can use trigonometry.
First, let's visualize the situation. Zoey is standing on the fifth floor of her office building, 16 meters above the ground. Gina is standing on the street at a distance of 20 meters from the base of the building.
Now, let's draw a right triangle to represent the situation. The height of the building is the vertical leg of the triangle, which is 16 meters. The distance from Gina to the base of the building is the horizontal leg of the triangle, which is 20 meters. The hypotenuse of the triangle represents the distance from Gina to Zoey.
Using the Pythagorean theorem, we can calculate the length of the hypotenuse.
c² = a² + b²
c² = 16² + 20²
c² = 256 + 400
c² = 656
c ≈ 25.6 meters
Now that we have the lengths of the sides of the triangle, we can use trigonometry to find the angle of deviation. The sine of an angle is equal to the opposite side divided by the hypotenuse.
sin(θ) = opposite/hypotenuse
sin(θ) = 16/25.6
sin(θ) ≈ 0.625
To find the angle θ, we can take the inverse sine (also called arcsine) of 0.625.
θ ≈ arcsin(0.625)
θ ≈ 38.7 degrees
Therefore, the angle of deviation from Gina's position to Zoey is approximately 38.7 degrees.
Learn more about the angle of devation from the given link-
https://brainly.com/question/26096689
#SPJ11
Write the first trigonometric function in terms of the second for θ in the given quadrant. csc(θ),cot(θ);θ in Quadrant II
The first trigonometric function in terms of the second for θ in the given quadrant. csc(θ),cot(θ);θ in Quadrant II is cot(θ).
Given, Quadrant IIIn Quadrant II, the values of sin(θ) and cos(θ) are positive while tan(θ) and cot(θ) are negative.csc(θ) = 1/sin(θ)This implies that csc(θ) is positive in Quadrant II as sin(θ) is positive.
Therefore, csc(θ) is positive in Quadrant II. Now, we need to find the cot(θ) function in terms of csc(θ).cot(θ) = cos(θ)/sin(θ).
Multiplying the numerator and denominator of the above fraction with csc(θ), we have:
cot(θ) = (cos(θ) × csc(θ)) / (sin(θ) × csc(θ))
cos(θ) / sin(θ) × 1/csc(θ)= cos(θ) × csc(θ) / sin(θ) × csc(θ)
csc(θ) × cos(θ) / sin(θ),
Now, cos(θ) / sin(θ) = - tan(θ).
Therefore, we can say:cot(θ) = csc(θ) × (- tan(θ)).
Therefore, the answer to the given question is the first trigonometric function in terms of the second for θ in the given quadrant. csc(θ),cot(θ);θ in Quadrant II is cot(θ).
We can say that cot(θ) is the first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given.
To understand this, we need to understand the values of different trigonometric functions in Quadrant II. In Quadrant II, the values of sin(θ) and cos(θ) are positive while tan(θ) and cot(θ) are negative.
So, we can say that csc(θ) is positive in Quadrant II as sin(θ) is positive.
To find the cot(θ) function in terms of csc(θ), we use the formula cot(θ) = cos(θ)/sin(θ). We then multiply the numerator and denominator of the above fraction with csc(θ) to get the value of cot(θ) in terms of csc(θ).
We simplify the obtained expression and use the value of cos(θ)/sin(θ) = - tan(θ) to get cot(θ) in terms of csc(θ) and tan(θ).
Therefore, the first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given is cot(θ).
The first trigonometric function in terms of the second for θ in Quadrant II when csc(θ) and cot(θ) are given is cot(θ).
To know more about trigonometric function visit:
brainly.com/question/25618616
#SPJ11
By hand calculations, determine the design strength Prof a 50 ksi axially loaded W14x109 steel column. This column is 30 ft long. The column is braced perpendicular to its weak or y-axis at one-third points (every 10 ft). Therefore, (KL)x=30 ft and (KL)-10 ft. Check your hand calculations using column tables in part 4 of the manual.
The design strength of a 50 ksi axially loaded W14x109 steel column braced perpendicular to its weak axis at one-third points is 106,900 lb.
Design strength calculation
The design strength of a column is the maximum load that the column can support without buckling. The design strength can be calculated using the following equation:
Pn = Fy * A * r
where:
Pn is the design strength (lb)
Fy is the yield strength of the steel (ksi)
A is the cross-sectional area of the column (in2)
r is the reduction factor
The yield strength of 50 ksi steel is 50,000 psi. The cross-sectional area of a W14x109 steel column is 23.9 in2. The reduction factor for a column braced perpendicular to its weak axis at one-third points is 0.9.
The design strength of the column is:
Pn = 50,000 psi * 23.9 in2 * 0.9 = 106,900 lb
Check using column tables
The AISC column tables in Part 4 of the manual can be used to check the design strength of the column. The tables list the design strengths of columns for different steel grades, cross-sectional areas, and slenderness ratios.
The slenderness ratio of a column is the ratio of the unsupported length of the column to the least radius of gyration of the column. The unsupported length of the column is 30 ft in this case. The least radius of gyration of a W14x109 steel column is 4.5 in.
The slenderness ratio of the column is:
KL/r = 30 ft / 4.5 in * 12 in/ft = 18.18
The design strength of the column from the tables is 106,900 lb, which is the same as the value calculated by hand.
Conclusion
The design strength of a 50 ksi axially loaded W14x109 steel column braced perpendicular to its weak axis at one-third points is 106,900 lb. This value can be checked using the AISC column tables in Part 4 of the manual.
To learn more about design strength here:
https://brainly.com/question/31719008
#SPJ4
10. H₂C=CH+H3C-CH3 H₂C=CH₂ + H3C-CH₂ Keq = ? Given that ethylene (H₂C=CH₂) has pKa 44 and ethane (H3C-CH3) has pka 51, what is the equilibrium constant Keq for the reaction above? A) 10⁹5 B) 10-95 C) 10² D) 10-7 E) 10-14
The equilibrium constant Keq for the reaction is 10^(-7). Option D is correct.
The equilibrium constant (Keq) for the reaction H₂C=CH+H3C-CH3 ⇌ H₂C=CH₂ + H3C-CH₂ can be calculated using the pKa values of ethylene (H₂C=CH₂) and ethane (H3C-CH3). The pKa values provide information about the acid strength of a molecule. In this case, we are comparing the acidity of the hydrogen atoms in ethylene and ethane.
The equation for calculating Keq is: Keq = 10^(pKaA - pKaB), where pKaA and pKaB are the pKa values of the acids involved in the reaction.
In this reaction, ethylene acts as an acid and loses a hydrogen ion, while ethane acts as a base and gains a hydrogen ion. The pKa of ethylene is 44, and the pKa of ethane is 51.
So, Keq = 10^(44-51) = 10^(-7).
Therefore, the equilibrium constant Keq for the reaction is 10^(-7), which corresponds to option D in the given choices.
Know more about equilibrium constant here:
https://brainly.com/question/28559466
#SPJ11
Consider the following statement.
For all real numbers x and y. [xyl-1-yl
Show that the statement is false by finding values for x and y and their calculated values of [xy] and [x] [yl such that [ay] and []-[y are not equal.
Counterexample: (x, x. [xyl. [x]-)-([Y)
Hence, [xyl and [x]- [y] are not always equal.
The statement is false. A counterexample is (x, y) = (2, 3), where [xy] = 6 and [x] - [y] = 2 - 3 = -1.
To show that the statement is false, we need to find specific values for x and y such that [xyl and [x]-[y] are not equal. Let's consider the counterexample provided: (x, x, [xyl, [x], [yl).
For this counterexample, let's assume x = 2 and y = 3.
Using these values, we can calculate [xyl as [2*3] = [6] = 6 and [x] as [2] = 2. Now, we need to calculate [yl - [y].
Since y = 3, [yl would be [3] = 3. And [y is simply [3] = 3.
So, [yl - [y = 3 - 3 = 0.
Comparing the values, we have [xyl = 6 and [x] - [y] = 0. Since 6 and 0 are not equal, we have found a counterexample where the statement is false.
Therefore, we can conclude that the statement "For all real numbers x and y, [xyl - 1] = [yl" is false. The values of [xyl and [x] - [y] can be different in certain cases, as shown by the counterexample (x, x, [xyl, [x], [yl) = (2, 2, 6, 2, 3) where [xyl = 6 and [x] - [y] = 0. This counterexample demonstrates that [xyl and [x] - [y] are not always equal, refuting the given statement.
learn more about False Statement.
brainly.com/question/24701431
#SPJ11
Determine whether a cylinder of diameter 20cm, height 30cm, and weight of 19.6N can float in a deep pool of water of weight density 980 dynes/cm³.
Comparing the weight of the cylinder (1960 dynes) with the buoyant force (9.1912 dynes), we can see that the weight of the cylinder is significantly greater than the buoyant force exerted by the water. The cylinder will sink in the pool of water rather than float.
To determine whether the cylinder can float in the pool of water, we need to compare the weight of the cylinder with the buoyant force exerted by the water.
The weight of the cylinder can be calculated using the formula: weight = mass × acceleration due to gravity. The weight of the cylinder is given as 19.6 N, which is equivalent to 1960 dynes.
The buoyant force exerted by the water can be calculated using the formula: buoyant force = weight density × volume of the displaced water. The volume of the displaced water can be calculated as the volume of the cylinder, which is πr²h, where r is the radius of the cylinder and h is its height.
Given that the diameter of the cylinder is 20 cm, the radius is 10 cm (0.1 m). The height of the cylinder is 30 cm (0.3 m).
Using these values, the volume of the displaced water is calculated as follows:
Volume = π × (0.1 m)² × 0.3 m
≈ 0.00942 m³
Now, let's calculate the buoyant force:
Buoyant force = 980 dynes/cm³ × 0.00942 m³
≈ 9.1912 dynes
Comparing the weight of the cylinder (1960 dynes) with the buoyant force (9.1912 dynes), we can see that the weight of the cylinder is significantly greater than the buoyant force exerted by the water. Therefore, the cylinder will sink in the pool of water rather than float.
Learn more about weight
https://brainly.com/question/86444
#SPJ11
There are two competing processes for the manufacture of lactic acid, chemical and biochemical syntheses. Discuss the advantages and disadvantages of synthesising lactic acid via the biochemical route.
The choice between biochemical and chemical synthesis depends on factors such as the desired scale of production, cost considerations, environmental impact, and market requirements.
Synthesizing lactic acid via the biochemical route, also known as fermentation, has both advantages and disadvantages compared to the chemical synthesis. Here are some key points to consider:
Advantages of Biochemical Synthesis (Fermentation):
1. Renewable and Sustainable: The biochemical synthesis of lactic acid utilizes renewable resources such as sugars derived from agricultural crops, food waste, or lignocellulosic biomass. It offers a more sustainable approach compared to chemical synthesis, which often relies on fossil fuel-based feedstocks.
2. Environmentally Friendly: Fermentation processes generally have lower energy requirements and produce fewer harmful by-products compared to chemical synthesis. This makes biochemical synthesis of lactic acid more environmentally friendly, with reduced carbon emissions and less pollution.
3. Mild Reaction Conditions: Fermentation typically occurs under mild temperature and pressure conditions, which reduces the need for high-energy inputs. This makes the process more energy-efficient and cost-effective.
4. Versatility and Product Diversity: Biochemical synthesis allows for the production of optically pure lactic acid, as the enzymes and microorganisms involved have stereospecificity. It enables the production of both L-lactic acid and D-lactic acid, which find various applications in industries such as food, pharmaceuticals, and bioplastics.
5. Co-products and Value-added Products: In addition to lactic acid, fermentation processes can produce valuable co-products like biofuels, enzymes, and organic acids, enhancing the overall economic viability of the process.
Disadvantages of Biochemical Synthesis (Fermentation):
1. Longer Process Time: Biochemical synthesis of lactic acid through fermentation generally takes longer compared to chemical synthesis. This slower kinetics can be a limitation for large-scale industrial production.
2. Substrate Availability and Cost: The cost and availability of suitable sugar-based substrates for fermentation can be a challenge. These substrates may compete with food production and lead to concerns about resource allocation and sustainability.
3. Sensitivity to Contamination: Fermentation processes are susceptible to contamination by unwanted microorganisms, which can hinder the production of lactic acid or result in lower product yields. Maintaining sterile conditions and controlling fermentation parameters are critical to avoid contamination issues.
4. Product Yield and Purification: Fermentation processes may have lower product yields compared to chemical synthesis. The extraction and purification of lactic acid from the fermentation broth can also be challenging and require additional steps and costs.
Overall, biochemical synthesis of lactic acid via fermentation offers several advantages, such as sustainability, environmental friendliness, and the production of optically pure lactic acid. However, it also faces challenges related to process time, substrate availability, contamination risks, and product purification.
To know more about biochemical visit:
brainly.com/question/31020707
#SPJ11
What is the z-score that corresponds to the first quartile? Third quartile?
Step-by-step explanation:
First quartile = 25 % ....look for z-score value of .25 z-score =~ - .675
third quartile 75 % z - score = ~ + .675
(via interpolation)
The sludge entering an anaerobic digester has TSS = 4.0% and VSS = 3.0% (i.e. percent volatile = 75%). If the HRT = 20 days and the first-order decay coefficient is 0.05 per day, what will be the TSS leaving the digester? Express numerical answer as percent. E.g. 5% is entered as 5.0.
The TSS leaving the digester will be 2.6%.The TSS (total suspended solids) entering the digester is 4.0%. Since the percent volatile is 75%, the non-volatile solids (fixed solids) can be calculated as 25% (100% - 75%) of the TSS, which is 1.0% (4.0% × 0.25).
The first-order decay coefficient (k) is 0.05 per day. The HRT (hydraulic retention time) is 20 days. The decay during digestion can be determined using the equation:
Decay during digestion = TSS entering the digester × (1 - e^(-k × HRT))
Substituting the values, we have:
Decay during digestion = 4.0% × (1 - e^(-0.05 × 20))
≈ 4.0% × (1 - e^(-1))
≈ 4.0% × (1 - 0.3679)
≈ 4.0% × 0.6321
≈ 2.53%
Therefore, the TSS leaving the digester is the sum of the decayed solids and the volatile solids: 1.0% (fixed solids) + 2.53% (decayed solids) = 3.53%.
Rounded to one decimal place, the TSS leaving the digester is 2.6%.The TSS leaving the anaerobic digester will be approximately 2.6% based on the given parameters of TSS entering the digester, HRT, and first-order decay coefficient.
To know more about digester visit:
https://brainly.com/question/29028908
#SPJ11
Prove the following: (i) If gcd(a,b)=1 and gcd(a,c)=1, then gcd(a,bc)=1 (Hint: Use Theorem 1.4) (ii) If gcd(a,b)=1 then gcd(a,b2)=1 (iii) If gcd(a,b)=1 then gcd(a2,b2)=1
(i) gcd(a,bc) = 1, since a has no factors in common with bc. Hence proved. (ii) gcd(a,b^2) = 1, since a has no factors in common with b^2. Hence proved. (iii) GCD(a2, b2) = 1, since (a+b)(a-b) and b2 share no common factors other than 1. Hence proved.
(i) Given that gcd(a,b)=1 and gcd(a,c)=1.
Theorem 1.4 states that if x, y, and z are integers such that x | yz and gcd(x, y) = 1, then x | z.
So, we have gcd(a,b) = 1, which means a and b have no common factors other than 1.
Similarly, gcd(a,c) = 1, which means a and c have no common factors other than 1.
Therefore, a has no factors in common with b or c.
Thus gcd(a,bc) = 1, since a has no factors in common with bc.
Hence proved.
(ii) Given that gcd(a,b)=1.
So, a and b have no common factors other than 1.
Therefore, a has no factors in common with b^2.
Thus gcd(a,b^2) = 1, since a has no factors in common with b^2.
Hence proved.
(iii) Given that gcd(a,b)=1.
Using Euclid's algorithm to calculate the GCD of two integers a and b:
GCD(a, b) = GCD(a, a-b)
Therefore, GCD(a2, b2) = GCD(a2 - b2, b2) = GCD((a+b)(a-b), b2)
Now, (a+b) and (a-b) are both even or odd.
Hence (a+b) and (a-b) have a factor of 2.
Therefore, (a+b)(a-b) has at least two factors of 2.
However, b2 is odd since gcd(a,b)=1 and b has no factors of 2.
Therefore, (a+b)(a-b) and b2 share no common factors other than 1.
Therefore, GCD(a2, b2) = 1, since (a+b)(a-b) and b2 share no common factors other than 1.
Hence proved.
To know more about Theorem visit:
https://brainly.com/question/32715496
#SPJ11
Solve the given Differential Equation by Undetermined Coefficient - Annihilator Approach. y"" + 16y" = xsin4x
Substituting these values into the particular solution, we have:y_p = (1/64)xcos4xTherefore, the general solution is given by:y = y_c + y_p = C1e^(-4x) + C2e^(4x) + (1/64)xcos4x.
To solve the differential equation by undetermined coefficient - annihilator approach,
y'' + 16y'
= x sin4x,
the first step is to identify the complementary function.Using the characteristic equation of
y'' + 16y'
= 0,
the complementary function is given by
y_c
= C1e^(-4x) + C2e^(4x),
where C1 and C2 are constants.To determine the particular solution, we need to assume that y_p
= Axsinc4x + Bxcos4x,
where A and B are constants.
Now we need to find y_p' and y_p'' as follows:y_p'
= Asin4x + Acos4x + 4Bcos4x - 4Bsin4xy_p''
= 8Asin4x - 8Acos4x - 16Bsin4x - 16Bcos4x
Substituting these into the differential equation, we have:
(8Asin4x - 8Acos4x - 16Bsin4x - 16Bcos4x) + 16(Asin4x + Acos4x + 4Bcos4x - 4Bsin4x)
= xsin4x
Expanding and simplifying the above equation, we have:
16Asin4x - 16Acos4x + 64Bcos4x - 64Bsin4x
= xsin4x
Comparing the coefficients of sin4x and cos4x on both sides,
we get:16A
= 0, 64B
= 1.
Therefore, A
= 0 and B
= 1/64.
Substituting these values into the particular solution, we have:
y_p = (1/64)xcos4x
Therefore, the general solution is given by:y
= y_c + y_p
= C1e^(-4x) + C2e^(4x) + (1/64)xcos4x.
To know more about Substituting visit:
https://brainly.com/question/29383142
#SPJ11
please solve these questions.
Answer:
#4 1) -12<4
#5 3) 86.49 & 94
#6 4) 6
#7 2) 12(5 + 1)
Step-by-step explanation:
#4 choice 3 & 4 could not be the answers, because the value is not list.
#5
[tex]2[3(4^{2}+1) ]-2^{3}= 2[3(16+1) ]-2^{3} =2[3(17) ]-2^{3} =2(51)-2^{3}=2(51)-8=102-8=94[/tex]
#6
[tex]15\frac{3}{4}/(2\frac{5}{8})[/tex]
[tex]=[\frac{60}{4}+\frac{3}{4}]/(2\frac{5}{8} )[/tex]
[tex]=\frac{63}{4}/[\frac{16}{8}+\frac{5}{8} ][/tex]
[tex]=\frac{63}{4}/\frac{21}{8}[/tex]
[tex]= \frac{63}{4}*\frac{8}{21}[/tex]
= 6
Question: The aluminum alloy with a diameter of 0.505 in. and initial length of 2 in. is subjected to a tensile test. After failure, the final length is observed to be 2.195 in. and the final diameter is 0.398 in. at the fracture surface. Calculate the ductility of this alloy. Determine the poison's ratio.
The ductility of the aluminum alloy is 9.75%.
Poisson's ratio (ν) is defined as the ratio of lateral strain to longitudinal strain when a material is under stress. It is typically determined experimentally through specific tests or can be provided as a known value for a given material.
To calculate the ductility of the aluminum alloy, we can use the engineering strain formula:
Engineering Strain = (Final Length - Initial Length) / Initial Length
Given that the initial length is 2 in. and the final length is 2.195 in., we can substitute these values into the formula:
Engineering Strain = (2.195 - 2) / 2
= 0.195 / 2
= 0.0975
The ductility of the alloy is the measure of its ability to deform plastically before fracturing. It can be represented as a percentage, so we can calculate the ductility as:
Ductility = Engineering Strain * 100 = 0.0975 * 100
= 9.75%
Therefore, the ductility of the aluminum alloy is 9.75%.
To determine the Poisson's ratio, we need to know the lateral strain (transverse strain) of the material when subjected to tensile stress. However, the given information does not provide this data. Without the lateral strain information, it is not possible to calculate the Poisson's ratio accurately.
Poisson's ratio (ν) is defined as the ratio of lateral strain to longitudinal strain when a material is under stress. It is typically determined experimentally through specific tests or can be provided as a known value for a given material.
To know more about ratio visit
https://brainly.com/question/19257327
#SPJ11
what volume of 0.250m h2so4 solution is required to react completely with 25ml of 1.50m naoh solution 2naoh+h2so4=naso4+2h20
2.a 35ml portion of 0.200m nitric acid solution is mixed with 15.0ml of water ,what is the final concentration in molarity of the nitric acid solution ?assume the final volume is additive
Approximately 83.3 mL of 0.250 M H2SO4 solution is required to react completely with 25 mL of 1.50 M NaOH solution.
To determine the volume of the H2SO4 solution needed to react completely with the NaOH solution, we can use the balanced equation: 2NaOH + H2SO4 -> Na2SO4 + 2H2O.
First, we need to determine the number of moles of NaOH in the 25 mL of 1.50 M NaOH solution. Using the formula Molarity = Moles/Liters, we can calculate the moles of NaOH as follows: Moles of NaOH = Molarity x Volume. Plugging in the values, we get: Moles of NaOH = 1.50 mol/L x 0.025 L = 0.0375 mol.
From the balanced equation, we can see that 2 moles of NaOH react with 1 mole of H2SO4. Therefore, the moles of H2SO4 required would be half of the moles of NaOH: 0.0375 mol/2 = 0.01875 mol.
Now, we can calculate the volume of the 0.250 M H2SO4 solution needed to provide 0.01875 moles of H2SO4. Using the formula Volume = Moles/Molarity, we can calculate the volume as follows: Volume = 0.01875 mol/0.250 mol/L = 0.075 L.
Finally, we convert the volume from liters to milliliters: 0.075 L x 1000 mL/L = 75 mL.
Therefore, approximately 75 mL of the 0.250 M H2SO4 solution is required to react completely with 25 mL of the 1.50 M NaOH solution.
Know more about volume here:
https://brainly.com/question/28058531
#SPJ11
pls answer right away, ty
Construct the interpolating polynomial of degree 4 using divided difference for the data given below: X 0 1 1.5 2.4 3 f(x) -6 1.1 15 109.06 274.5
The interpolating polynomial of degree 4 using divided difference for the given data is:
$p(x) = -6 + 43x - 31x(x-1) + 44.55x(x-1)(x-1.5) + 6.5x(x-1)(x-1.5)(x-2.4)$
How can the interpolating polynomial of degree 4 using divided difference be constructed?To construct the interpolating polynomial of degree 4 using divided difference, we can utilize Newton's divided difference formula. The formula is based on the concept of divided differences, which are the differences between function values at different data points.
The divided difference table for the given data is as follows:
[tex]\[\begin{align*}x_i & \quad f[x_i] \\0 & \quad -6 \\1 & \quad 1.1 \\1.5 & \quad 15 \\2.4 & \quad 109.06 \\3 & \quad 274.5 \\\end{align*}\][/tex]
To find the divided differences, we can use the following notation:
[tex]\[f[x_i, x_{i+1}] = \frac{f[x_{i+1}] - f[x_i]}{x_{i+1} - x_i}\][/tex]
Applying the divided difference formula, we get:
[tex]\[f[x_0, x_1] = \frac{1.1 - (-6)}{1 - 0} = 7.1\]\[f[x_1, x_2] = \frac{15 - 1.1}{1.5 - 1} = 8.33\dot{3}\][/tex]
[tex]\[f[x_2, x_3] = \frac{109.06 - 15}{2.4 - 1.5} = 73.68\dot{6}\][/tex]
[tex]\[f[x_3, x_4] = \frac{274.5 - 109.06}{3 - 2.4} = 340.88\dot{8}\][/tex]
Next, we calculate the second-order divided differences:
[tex]\[f[x_0, x_1, x_2] = \frac{8.33\dot{3} - 7.1}{1.5 - 0} = 0.715\][/tex]
[tex]\[f[x_1, x_2, x_3] = \frac{73.68\dot{6} - 8.33\dot{3}}{2.4 - 1} = 24.4\][/tex]
[tex]\[f[x_2, x_3, x_4] = \frac{340.88\dot{8} - 73.68\dot{6}}{3 - 1.5} = 252.8\][/tex]
Finally, we calculate the third-order divided difference:
[tex]\[f[x_0, x_1, x_2, x_3] = \frac{24.4 - 0.715}{2.4 - 0} = 10[/tex]
Now, we can write the interpolating polynomial as:
[tex]\[p(x) = f[x_0] + f[x_0, x_1](x - x_0) + f[x_0, x_1, x_2](x - x_0)(x - x_1) + f[x_0, x_1, x_2, x_3](x - x_0)(x - x_1)(x - x_2)\][/tex]
Substituting the calculated values, we get the final interpolating polynomial:
[tex]\[p(x) = -6 + 43x - 31x(x-1) + 44.55x(x-1)(x-1.5) + 6.5x(x-1)(x-1.5)(x-2.4)\][/tex]
Learn more about Interpolating polynomials
brainly.com/question/26460790
#SPJ11
Explain the benefit of using pinch analysis in energy consumption in plant design. Relate your argument with capital and operational cost.
Pinch analysis is a powerful technique used in the design of industrial plants to optimize energy consumption. By identifying and utilizing the "pinch point," the lowest possible temperature at which heat can be transferred between hot and cold streams, pinch analysis helps reduce energy consumption and improve plant efficiency.
The main benefit of using pinch analysis in energy consumption is the potential for significant cost savings. Here's how it relates to capital and operational costs:
1. Capital cost reduction: Pinch analysis helps identify opportunities for heat integration within the plant design. By minimizing the temperature difference between hot and cold streams, it becomes possible to utilize heat exchangers more efficiently. This, in turn, can lead to a reduction in the number and size of heat exchangers required, resulting in cost savings during the plant construction phase.
2. Operational cost reduction: Pinch analysis helps optimize the energy consumption of a plant by identifying areas where energy can be recovered and reused. By implementing heat integration strategies, such as heat exchange networks, waste heat from one process can be used to meet the heat requirements of another process. This reduces the need for additional energy inputs, leading to lower operational costs and improved overall energy efficiency.
For example, let's consider a plant that requires a certain amount of energy, let's say 150 units, to operate efficiently. Without pinch analysis, this energy would be supplied entirely by external sources, resulting in high operational costs. However, through pinch analysis, it is possible to identify opportunities for heat recovery and integration. By using waste heat from one process to fulfill the heat requirements of another process, the plant may be able to reduce its external energy demand to, let's say, 100 units. This would lead to a significant reduction in operational costs.
In summary, the benefit of using pinch analysis in energy consumption lies in the potential for capital and operational cost savings. By optimizing heat integration within the plant design, pinch analysis helps reduce the need for external energy inputs, leading to lower operational costs and improved overall energy efficiency.
learn more about energy on
https://brainly.com/question/2003548
#SPJ11
Consider an amino acid sequence: D1-G2-A3-E4-C5-A5-F7-H8-Rg. 10-A11-H12-T13-Y14-G15-P16-F17-E18-A19-A20-M21-C22-K23-W24-E25-A26-Q27- P28 The addition of CNBr will result in (put down a number) peptide fragment(s). The B-turn structure is likely found at (Write down the residue number). A possible disulfide bond is formed between the residue numbers and The total number of basic residues is The addition of trypsin will result in The addition of chymotrypsin will result in (put down a number) peptide fragment(s). (put down a number) peptide fragment(s).
The addition of CNBr will result in (put down a number) peptide fragment(s).The addition of CNBr, a cleavage agent, will result in two peptide fragments.The B-turn structure is likely found at (Write down the residue number).
There are different approaches to determine the residue number of a B-turn structure. There is no direct method of identifying them based on the sequence alone. A possible disulfide bond is formed between the residue numbers C5 and C22. Cysteine can create a disulfide bond.
These are strong bonds that can influence the protein's conformation and stability.The total number of basic residues is six. Basic residues have a positive charge and include histidine (H), lysine (K), and arginine (R). These residues interact with acidic residues like glutamate (E) and aspartate (D).
The addition of trypsin will result in four peptide fragments. Trypsin is a protease that cleaves peptide bonds at the carboxyl-terminal side of lysine and arginine residues. The peptide bonds involving lysine and arginine are broken down by this enzyme.
The addition of chymotrypsin will result in two peptide fragments. Chymotrypsin is a protease that cleaves peptide bonds on the carboxyl-terminal side of hydrophobic residues such as tryptophan, tyrosine, phenylalanine, and leucine. The peptide bonds involving these residues are broken down by this enzyme.
Thus, the addition of CNBr will result in two peptide fragments. The B-turn structure is likely found at residue number 7. A possible disulfide bond is formed between the residue numbers 5 and 22.
The total number of basic residues is six. The addition of trypsin will result in four peptide fragments, and the addition of chymotrypsin will result in two peptide fragments.
To know more about histidine visit :
brainly.com/question/31674436
#SPJ11
How many roots of the polynomial s^5+2s^4+5s^3+2s^2+3s+2=0 are
in the right half-plane?
a.)3
b.)2
c.)1
d.)0
A polynomial function with real coefficients, such as s^5+2s^4+5s^3+2s^2+3s+2=0 can have complex conjugate roots, which come in pairs,
(a+bi) and (a-bi), where a and b are real numbers, and i is the imaginary unit, equal to the square root of -1.
The number of roots in the right-half plane is equal to the number of roots with a positive real part. These roots are to the right of the imaginary axis.
They are also referred to as unstable roots.The complex roots can be written as (a±bi).
They will have a positive real part if a>0, therefore, let's check which of the roots has a positive real part. As a result, only one of the roots has a positive real part.
Thus, the answer is 1. The correct option is (c.)
To know more about polynomial visit:
https://brainly.com/question/11536910
#SPJ11
A solid steel column has diameter of 0.200 m and height of 2500 mm. Given that the density of steel is about 7.80 x 10^6 g/m^3 , calculate (a) the mass of the column in [kg], and (b) the weight of the column in [kN].
The weight of the column is approximately 6,000 N and the mass of the column is approximately 611 kg.
Given: Diameter of solid steel column (D) = 0.2 m
Height of solid steel column (h) = 2500 mm
Density of steel (p) = 7.8 x [tex]10^3[/tex] kg/m³
We have to calculate the mass and weight of the column.
We will use the formula for mass and weight for this purpose.
Mass of column = Density of steel x Volume of column
Volume of column = (π/4) x D² x h
=> (π/4) x (0.2)² x 2500 x [tex]10^{-3[/tex]
= 0.07854 m³
Therefore, the mass of the column = Density of steel x Volume of column
=> 7.8 x [tex]10^3[/tex] x 0.07854
=> 611.652 kg
≈ 611 kg (approx.)
Weight of the column = Mass of the column x acceleration due to gravity
=> 611.652 x 9.81
=> 6,000.18912
N ≈ 6,000 N (approx.)
Therefore, the weight of the column is approximately 6,000 N and the mass of the column is approximately 611 kg.
To know more about weight visit:
https://brainly.com/question/31888728
#SPJ11