The percentage of radioactive isotope 11C that remains after 58.6 minutes of reaction 41.0%.
The first-order rate law equation for radioactive decay is mentioned here,
N(t) = N₀ × e^(-kt). Here,
N(t) is the amount of the radioactive substance at time t
N₀ is the initial amount of the radioactive substance
k is the rate constant for the decay process
e is the mathematical constant e (approximately 2.71828)
The rate constant k can be determined by the half-life for decay, t½, using the following equation below,
k = ln(2) / t½
In this euation, ln(2) is the natural logarithm of 2 (which is approximately 0.69315).
In this case, the half-life of 11C is mentioned to be 20.334 minutes, so the rate constant is:
k = ln(2) / t½ = 0.69315 / 20.334 min = 0.03405 min⁻¹
Now we can utilize the rate law equation to calculate the amount of 11C remaining after 58.6 minutes. As the initial amount of 11C is 100% and the remaining amount at time t is the percentage we're looking for. Therefore percentage remaining after 58.6 minutes of reaction ,
N(t) = N₀ × e^(-kt)
N(58.6 min) = 100% × e^(-0.03405 min⁻¹ × 58.6 min)
N(58.6 min) = 41.0%
So the percentage of 11C that will be remaining after 58.6 minutes of reaction is found out to be 41.0%.
Learn more about radioactive decay :
https://brainly.com/question/1770619
#SPJ4
methane gas and oxygen gas react to form water vapor and carbon dioxide gas. what volume of carbon dioxide would be produced by this reaction if of methane were consumed?
The volume of carbon dioxide that would be produced by this reaction if methane were consumed is: [tex]CH4 + 2O2 → CO2 + 2H2O[/tex]
When methane gas and oxygen gas react, they produce water vapor and carbon dioxide gas. The volume of carbon dioxide produced by this reaction depends on the amount of methane gas that is consumed.
If 100 mL of methane gas were consumed, then the volume of carbon dioxide produced would be 44 mL. This reaction can be expressed in the following equation:
[tex]CH4 + 2O2 → CO2 + 2H2O[/tex]
The mole ratio of methane gas to carbon dioxide gas produced by this reaction is 1:1. This means that if 100 mL of methane gas is consumed, then 44 mL of carbon dioxide gas will be produced. This is because 44 mL of carbon dioxide is equivalent to 1 mole of carbon dioxide gas, and 100 mL of methane gas is equivalent to 1 mole of methane gas.
Therefore, if 100 mL of methane gas is consumed in this reaction, then 44 mL of carbon dioxide gas will be produced. This can be determined by using the mole ratio of methane gas to carbon dioxide gas, which is 1:1.
To know more about methane refer here:
https://brainly.com/question/28933327#
#SPJ11
If a body covers 20 m in east direction in 5 Second Calculate the velocity of a body.
v = 20/5
= 4m/s
Velocity equals distance over time.
calculate the magnitude of the maximum orbital angular momentum lmax for an electron in a hydrogen atom for states with a principal quantum number of 2.
The magnitude of the maximum orbital angular momentum lmax for an electron in a hydrogen atom for states with a principal quantum number of 2 is 2.
What is angular momentum?In physics, аngulаr momentum (аlso known аs moment of momentum or rotаtionаl momentum) is а meаsure of аn object's rotаtionаl motion аround а fixed аxis. The аmount of аngulаr momentum аn object hаs is determined by the mаss аnd speed of the object rotаting аnd the distаnce between the rotаtion аxis аnd the object.
What is the orbitаl аngulаr momentum of аn electron?The orbitаl аngulаr momentum (L) of аn electron is а quаntum number thаt is used to describe its motion аround the nucleus of аn аtom. It is one of the four quаntum numbers thаt cаn be used to describe аn electron in аn аtom. Its vаlues аre determined by the principаl quаntum number (n) аnd the аzimuthаl quаntum number (l).
The mаximum vаlue of the аzimuthаl quаntum number (l) is determined by the principаl quаntum number (n). For а given vаlue of n, l cаn hаve vаlues rаnging from 0 to n-1. Therefore, for the principаl quаntum number of 2, l cаn hаve vаlues of 0 or 1. Thus, the mаximum vаlue of the orbitаl аngulаr momentum is 2.
For more information about momentum refers to the link: https://brainly.com/question/29113044
#SPJ11
what is the relationship between the unit cell length a and the atomic radius r for the body centered cubic
The relationship between the unit cell length a and the atomic radius r for the body centered cubic can be expressed by the formula:
a = 4r/√3
A unit cell is a cube of atoms, and in the body centered cubic structure, the unit cell contains 8 corner atoms and 1 central atom.
The 8 corner atoms each occupy a space of one-eighth of the total unit cell volume, whereas the central atom occupies one-half of the total unit cell volume. Thus, the total volume of a unit cell can be expressed as: V = a3.
The atomic radius, r, is the distance between the center of an atom and its outermost electron shells. Thus, the atomic radius of the central atom will be half of the length of the unit cell, a.
This can be expressed mathematically as: r = a/2.
By combining the two equations, a = 4r/√3, we can get the formula for the relationship between the unit cell length a and the atomic radius r for the body centered cubic: a = 4r/√3.
to know more about body centered cubic refer here:
https://brainly.com/question/13996938#
#SPJ11
ferrous iron (fe2 ) is octahedrally coordinated. this means it should have six ligands. which are the coordination sites in hemoglobin?
The coordination sites in hemoglobin are 4 nitrogen atoms, 1 histidine, and 1 water molecule.
Ferrous iron (Fe²⁺) is octahedrally coordinated, which means it should have six ligands.
Hemoglobin is a protein found in red blood cells that carries oxygen from the lungs to the body's tissues and carbon dioxide from the tissues to the lungs. The oxygen and carbon dioxide bind to heme, an iron-containing molecule in hemoglobin. Hemoglobin has a tetrameric structure, meaning it is composed of four subunits.
Each subunit of hemoglobin is made up of a heme group and a globin chain. The heme group consists of an iron ion coordinated with a porphyrin ring and an oxygen molecule. The globin chain is made up of amino acids that fold into a specific shape to bind the heme group.
Heme is coordinated to the iron ion through four nitrogen atoms in the porphyrin ring and one histidine residue in the globin chain. This forms a coordination complex known as a heme-iron-cysteine coordination sphere. A second histidine residue in the globin chain is located near the sixth coordination site on the iron ion, but it does not directly coordinate with the iron. Instead, it interacts with the bound oxygen molecule, stabilizing its binding to the heme group.
The sixth coordination site on the iron ion in heme is available to bind other ligands, but in hemoglobin, it is typically occupied by a water molecule. This water molecule can be displaced by carbon monoxide, which binds to the heme group with a higher affinity than oxygen, leading to carbon monoxide poisoning.
Overall, the coordination sites in hemoglobin are the four nitrogen atoms in the porphyrin ring, one histidine residue in the globin chain, and a water molecule or other ligand occupying the sixth coordination site on the iron ion.
To know more about hemoglobin, refer here:
https://brainly.com/question/15011428#
#SPJ11
Synthesis of tetracyclone lab report discussion questions
1. this aldol condensation was ran in ethanol, however all starting materials are also soluble in acetone. suggest why acetone wouldn't be an appropriate solvent for this reaction. 2. if you were to take an nmr of your product, in what region(s) of the spectrum (ppm range) would you see peaks? 3. if you were to take an ftir spectrum of your product, what main peak(s) would you observe? 4. the rate of this reaction is mostly held back by the poor solubility of koh in ethanol, which leads to slow deprotonation of the dibenzylketone. suggest a possible improvement that would allow for a faster rate of reaction.
Acetone is a polar aprotic solvent, meaning it cannot effectively solvate charged species like the hydroxide ion in KOH. Since the aldol condensation reaction involves deprotonation by hydroxide ion, using acetone as a solvent could slow down the reaction rate or even prevent it from occurring.
Ethanol is a better solvent for this reaction because it can solvate both the hydroxide ion and the organic starting materials. In the NMR spectrum of the product, peaks would be observed in the region of 0-2 ppm for the methyl protons, around 2-2.5 ppm for the methylene protons adjacent to the carbonyl group, and around 7-8 ppm for the aromatic.
In the FTIR spectrum of the product, a main peak at around 1700-1750 cm-1 would be observed, corresponding to the carbonyl stretching vibration. Other peaks related to C-H bending and stretching vibrations could also be observed in the region of 2800-3000 cm-1.
One possible improvement to increase the rate of reaction would be to use a more polar solvent, such as DMF or DMSO, which can better solvate KOH and promote faster deprotonation of the dibenzylketone.
Another possible improvement would be to increase the temperature of the reaction, which can also speed up the rate of deprotonation and subsequent aldol condensation.
For more details about Acetone click here:
https://brainly.com/question/13334667#
#SPJ11
what are the physical processes by which atoms rearrange during phase transformations in the solid state
Diffusion, nucleation, and crystal growth are the physical processes by which atoms rearrange during phase transformations in the solid state.
Phase transformations in the solid state refer to a type of reaction that happens to the solid state of matter, which results in different properties of the substance.
It is important to note that the process of phase transformation happens through different physical processes that include evaporation, melting, sublimation, and condensation, among others.
During phase transformation in the solid state, atoms undergo a rearrangement process that changes the physical properties of the solid into a different phase. This process usually happens in a few ways, such as:
- Diffusion: This is the movement of atoms from one place to another due to the application of heat or pressure, which allows the atoms to shift positions within the solid. The diffusion process enables the atoms to break and form new bonds, resulting in phase transformation.
- Nucleation: This is a process that happens when the solid phase undergoes a change, which causes the formation of new atoms or molecules. This process typically occurs in areas where there is a higher concentration of atoms, and it takes place due to the application of heat or pressure.
- Crystal Growth: This is a process that happens when the atoms of a solid phase come together to form a new crystal structure. The crystal structure has a different arrangement of atoms, which results in different physical properties.
These processes change the physical properties of the solid into a different phase, resulting in different properties.
To learn more about phase transition refer: https://brainly.com/question/1115925
#SPJ11
citric acid contains 37.51% c, 4.20% h, and 58.29% o by mass. what is the empirical formula of this compound?
The empirical formula of the given compound can be determined as follows the CHOS or C3H4O3.
According to the given data, the compound citric acid contains 37.51% C, 4.20% H, and 58.29% O by mass. So, let's assume that we have 100 g of citric acid, and then, we can find the masses of each element present in it: Mass of carbon = 37.51 gMass of hydrogen = 4.20 g. Mass of oxygen = 58.29 g.
Next, we need to convert the masses into the number of moles using the molar masses of the elements. The molar mass of carbon = 12.01 g/mol, Number of moles of carbon = 37.51 g / 12.01 g/mol = 3.124 molMolar mass of hydrogen = 1.01 g/molNumber of moles of hydrogen = 4.20 g / 1.01 g/mol = 4.158 molMolar mass of oxygen = 16.00 g/molNumber of moles of oxygen = 58.29 g / 16.00 g/mol = 3.643 follow, we need to find the simplest whole-number ratio of these moles by dividing them by the smallest number of moles, which is 3.124 mol: Carbon = 3.124 mol / 3.124 mol = 1Hydrogen = 4.158 mol / 3.124 mol = 1.33 ≈ 1Oxygen = 3.643 mol / 3.124 mol = 1.17 ≈ 1So, the empirical formula of citric acid is CHOS or C3H4O3.
Read more about carbon:
https://brainly.com/question/19083306
#SPJ11
List six things cyber criminals typically ask for in a phishing email
Answer:
1. Date of birth.
2. Social security numbers.
3. Phone numbers.
4. Credit card details.
5. Home address.
6. Password information (or what they need to reset your password)
Explanation: They ask for any of the identification things you have.
based on what you know about the process of pcr, what reagents must have been included in the pcr bead you used in the experiment? explain.
In order to conduct PCR (polymerase chain reaction), the reagents included in the PCR bead should be template DNA, primers, DNA polymerase, dNTPs (deoxynucleotide triphosphates), and a buffer.
1. Template DNA is the target DNA that is to be amplified during the PCR process.
2. Primers are short pieces of single-stranded DNA that are complementary to the ends of the target DNA sequence.
3. DNA polymerase is an enzyme used to replicate the target DNA sequence.
4. dNTPs are the building blocks of DNA which include adenine, thymine, cytosine, and guanine.
5. Lastly, the buffer helps maintain the appropriate pH for the reaction to occur.
In conclusion, the PCR bead used in the experiment must have contained a template DNA, primers, DNA polymerase, dNTPs, and a buffer in order for PCR to take place.
To know more about PCR, refer here:
https://brainly.com/question/14843791#
#SPJ4
you run a column in a less polar solvent and then rerun the same column in a more polar solvent, what will happen to the spots in the column?
When you run a column in a less polar solvent and then rerun the same column in a more polar solvent, the spots in the column will move with different distances.
During this process, some of the spots will move with longer distances while others will move with shorter distances.
The spots that move with longer distances will be considered more polar and the spots that move with shorter distances will be considered less polar.
There are several factors that influence the movement of the spots in a column chromatography. The polarity of the solvent is one of the most important factors.
A polar solvent will attract polar compounds, while a nonpolar solvent will attract nonpolar compounds.
The spots in a column chromatography will move with different distances depending on the polarity of the solvent used.
In a less polar solvent, the spots will move with shorter distances because the solvent is not able to dissolve the more polar compounds as efficiently.
a more polar solvent, the spots will move with longer distances because the solvent is able to dissolve the more polar compounds more efficiently.
This is because a more polar solvent has a higher affinity for the polar compounds than a less polar solvent.Overall, the movement of the spots in a column chromatography is determined by the polarity of the solvent used.
When you run a column in a less polar solvent and then rerun the same column in a more polar solvent, the spots in the column will move with different distances.
to know more about solvent refer here:
https://brainly.com/question/30885015#
#SPJ11
a compound has an empirical formula of c3h6o and a molar mass of 116 g/mol. what is the molecular formula?
t a fixed temperature and number of moles, the initial volume and pressure of a helium gas sample are 153 ml and 433 torr, respectively. what is the final volume in ml, if the final pressure is 67.1 torr?
Answer:
yes because temperature is the moles of the initial respectively in the volume torr and 433 torr fixed the temperature heliums gas sample by 153 ml thank you
ka for acetic acid is 1.8x10-5, and ka for hypochlorous acid is 3.5x10-8 at 25 c. if 500 ml of 1.0 m acetic acid was mixed with 500 ml 1.0 m hypochlorous acid, which conjugate base would have the highest concentration? justify your answer.
Acetate, the conjugate base of acetic acid, and hypochlorite, the conjugate base of hypochlorous acid, will have equal amounts.
Is acetate acetic acid's conjugate base?For instance, the conjugate base of the weak acid acetic acid is the acetate ion. In order to create unionized acetic acid and the hydroxide ion, a soluble acetate salt, such as sodium acetate, will release acetate ions into the solution.
Acetic acid and hypochlorous acid will react when combined to produce their conjugate bases:
CH3COOH + HOCl ↔ CH3COO- + HClO
This reaction's equilibrium constant can be written as:
K = [CH3COO-][HClO] / [CH3COOH][HOCl]
[CH3COO-] = [CH3COOH] = 1.0 M
[HClO] = [HOCl] = 1.0 M
By entering these values as replacements in the equilibrium formula, we obtain:
K = (1.0 M) / (1.0 M)
= 1.0
To know more about acetic acid visit:-
https://brainly.com/question/15202177
#SPJ1
compare the three molecules you built, with the correct central atoms. predict the bond angle, why do these bond angles have such relation
The three molecules you built, with the correct central atoms, have different bond angles.
The bond angles in a molecule are determined by the number of electron groups around the central atom. In a molecule with two electron groups, such as water (H₂O), the bond angle is about 104.5°.
In a molecule with three electron groups, such as ammonia (NH₃), the bond angle is about 107°. In a molecule with four electron groups, such as methane (CH₄), the bond angle is about 109.5°. These bond angles have such a relation because of the number of electron groups present.
In a molecule with two electron groups, the electron groups are more widely spaced and thus form a wider bond angle. As the number of electron groups increases, the electron groups are closer together, forming a bond angle that is closer to the central atom.
To know more about bond angles click on below link:
https://brainly.com/question/14089750#
#SPJ11
the molecular formula of a certain compound is x2o3. if 18.88 g of the compound contains 10 g of x, the atomic mass of x is approximately: a. 40 g b. 54 g c. 27 g d. 12 g e. 24 g
The molecular formula of a certain compound is x2O3. If 18.88 g of the compound contains 10 g of x, the atomic mass of x is approximately 54 g.
Let's assume that the number of atoms of X in the molecular formula is equal to 'a'.
Then, the molecular mass of the compound will be equal to:-
(a × atomic mass of X) + (2 × molar mass of O) = 2a(MX) + 3 × 16 = 2a(MX) + 48
The atomic mass of X can be determined by finding the value of a.
The molecular mass of the compound = 18.88 g/mol
Mass of X = 10 g
We can calculate the value of a by simplifying the equation:-
2a(MX) + 48 = 18.88MX = (18.88 - 48)/- 4aMX = 14/3a
Now, on substituting the values,
The atomic mass of X = (18.88 g/mol × [14/3a])/[2(14/3a) + 3 × 16]
On simplifying the above equation:-
The atomic mass of X = (9.44 × 3a)/[28a + 144] (The denominator can be simplified by factoring 4)
The atomic mass of X = (9.44 × 3a)/(4 × (7a + 36))= 2.4 g/mol
For the given question, the atomic mass of X is approximately 54 g, so the correct answer is option b.
Learn more about atomic mass: https://brainly.com/question/30390726
#SPJ11
when carbonates (co32-) or bicarbonates (hco3-) are reacted with an acid in an acid-base reaction, the resulting product is:
When carbonates (CO3^2-) or bicarbonates (HCO3^-) are reacted with an acid in an acid-base reaction, the resulting product is carbonic acid (H2CO3).
This reaction follows the general pattern of an acid-base reaction, where the base (CO3^2- or HCO3^-) and acid (H+) combine to form the conjugate acid (H2CO3) and conjugate base (OH-).
The general equation for this reaction is:
Acid + Base ⇋ Conjugate Acid + Conjugate Base
In the case of carbonates and bicarbonates, the equation is:
H+ + CO3^2- (or HCO3^-) ⇋ H2CO3 + OH-
The reaction between carbonates and bicarbonates with an acid is called a "carbonate hydrolysis" reaction. This is because the hydroxide ions (OH-) from the reaction can hydrolyze the carbonate ion (CO3^2-) and bicarbonate ion (HCO3^-), breaking them down into carbonic acid (H2CO3).
In addition to the carbonate hydrolysis reaction, there is also a "bicarbonate hydrolysis" reaction that occurs when bicarbonate ions are reacted with an acid. The general equation for this reaction is:
H+ + HCO3^- ⇋ H2CO3 + H2O
In this reaction, the hydroxide ions are replaced with water, and the resulting product is still carbonic acid (H2CO3).
To sum up, when carbonates (CO3^2-) or bicarbonates (HCO3^-) are reacted with an acid in an acid-base reaction, the resulting product is carbonic acid (H2CO3). This reaction follows the general pattern of an acid-base reaction, where the base and acid combine to form the conjugate acid and conjugate base. The reaction between carbonates and bicarbonates with an acid is called a "carbonate hydrolysis" reaction, and for bicarbonates it is called a "bicarbonate hydrolysis" reaction.
To know more about hydrolysis click on below link :
https://brainly.com/question/29439050
#SPJ11
which of the compounds ofh2c2o4,ca(oh)2,koh, and hi, behave as acids when they aredissolved in water?
Answer: The compound H2C2O4 behaves as an acid when dissolved in water.
What are acids?
Acids are chemical compounds that donate protons, hydrogen ions, or accept electrons or lone pairs in chemical reactions. Acids increase the concentration of hydrogen ions (H+) in a solution.
Arrhenius acid: Arrhenius acid is any substance that provides an excess of H+ (hydronium ions) when dissolved in water, increasing the concentration of H+ ions in the solution.
What are bases?
Bases, like acids, are substances that contain elements or molecules that can interact with ions or protons in water. In water, bases, in general, decrease the concentration of hydrogen ions and increase the concentration of hydroxide ions. Base solutions may be defined as those with a pH greater than 7.
What is a solution?
A solution is a homogeneous mixture of two or more substances that is uniform throughout.
What is dissolution?
Dissolution is the process of dissolving a solute in a solvent to form a solution. Solutes: Solutes are the substances that are dissolved in a solvent to create a solution. Solvents: Solvents are the substances in which solutes dissolve to create a solution.
Which of the given compounds behave as acids when they are dissolved in water?
The following are the given compounds: Ca(OH)2KOHHIH2C2O4 Of all the given compounds, the compound H2C2O4 behaves as an acid when it is dissolved in water.
Learn more about electronegativity here:
https://brainly.com/question/23851972#
#SPJ11
Examine the two scenarios below.
Scenario A: 100 g of glucose in the presence of unlimited oxygen is metabolized through aerobic respiration.
Scenario B: 100 g of glucose in the absence of oxygen is metabolized through anaerobic respiration.
Would the mass of products produced in Scenario A be greater than, less than, or equal to the mass of products produced in Scenario B? Justify your answer.
The mass of products produced in Scenario A would be greater than the mass of products produced in Scenario B.
This is because aerobic respiration produces more ATP (energy) per molecule of glucose than anaerobic respiration. In aerobic respiration, glucose is completely broken down into carbon dioxide and water, and a total of 36-38 ATP molecules are produced per glucose molecule.
In anaerobic respiration, glucose is only partially broken down, and only 2 ATP molecules are produced per glucose molecule. The additional ATP produced in aerobic respiration results in the formation of more metabolic products such as carbon dioxide and water, leading to a higher mass of products overall.
What is aerobic respiration ?
Aerobic respiration is the process by which cells convert glucose and oxygen into carbon dioxide, water, and energy (in the form of ATP). This process takes place in the mitochondria of eukaryotic cells and in the cytoplasm of prokaryotic cells. The process of aerobic respiration is highly efficient and allows organisms to extract a large amount of energy from glucose, producing up to 38 molecules of ATP per molecule of glucose.
To know more about aerobic respiration, visit:
https://brainly.com/question/12605249
#SPJ1
a 2.90 m solution of methanol (ch3oh) in water has a density of 0.984 g/ml what are the a) mass percent, b) molarity, and c) mole percent of solute in this solution?
A 2.90 m solution of methanol (ch3oh) in water has a density of 0.984 g/ml has no mass percentage, The molarity of the solution is 0.000872 M and the mole percent of the solute in the solution is 0.0018%.
a) Mass percent
The mass percent of solute in the solution is the mass of the solute divided by the mass of the solution, then multiplied by 100. The mass percent of the solute in the given solution is computed below:
Mass of the solution = Volume of the solution × Density of the solution
= 2.90 L × 0.984 g/mL= 2.8476 g
Mass of the solute = Mass of the solution - Mass of water= 2.8476 g - (2.90 L × 1000 g/L) = -5.40 g
Mass percent = (mass of solute / mass of solution) × 100
= (-5.40 g / 2.8476 g) × 100= -189.89% (not possible)
Therefore, the mass percent of solute in the solution is not possible.
b) Molarity
The number of moles of solute present in the given solution is first calculated:
Molar mass of CH3OH = 12.01 + 3(1.01) + 16.00 = 32.04 g/mol
Mass of CH3OH in solution = Volume of solution × Density of solution × Mass percent of solute / 100
= 2.90 L × 0.984 g/mL × 2.89% / 100 = 0.0810 g
Moles of CH3OH in solution = mass of CH3OH / molar mass of CH3OH
= 0.0810 g / 32.04 g/mol= 0.00253 mol
Therefore, the molarity of the solution:
Molarity = Moles of solute / Volume of solution in liters
= 0.00253 mol / 2.90 L
=0.000872 M or 8.72 x 10^-4 Mc)
Therefore, the molarity of the solution is 0.000872 M or 8.72 x 10^-4 Mc)
c) Mole percent
The mole percent of the solute in the solution is computed as follows:
Mole fraction of solute = Moles of solute / Moles of solute + Moles of solvent
= 0.00253 / (0.00253 + 139.53)
= 0.000018 mole
Mole percent of solute = (mole fraction of solute × 100)
= (0.000018) × 100= 0.0018%
Therefore, the mole percent of the solute in the solution is 0.0018%.
For more such questions on methanol , Visit:
https://brainly.com/question/13630889
#SPJ11
a 24.6 ml sample of 0.389 m ethylamine, c2h5nh2, is titrated with 0.325 m hydroiodic acid. at the equivalence point, the ph is .
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0.
At the equivalence point of a titration between 24.6 mL of 0.389 M ethylamine, C2H5NH2, and 0.325 M hydroiodic acid, the pH is 0. The equation for the reaction is:
C2H5NH2 + HI → C2H5NH3+ + I-
The number of moles of hydroiodic acid, HI, needed to reach the equivalence point is equal to the number of moles of ethylamine, C2H5NH2. To calculate this, use the following equation:
Moles of HI = Moles of C2H5NH2
Volume of C2H5NH2 x Molarity of C2H5NH2 = Volume of HI x Molarity of HI
24.6 mL x 0.389 M = Volume of HI x 0.325 M
Volume of HI = 24.6 mL x 0.389 M / 0.325 M
Volume of HI = 30.53 mL
At the equivalence point, the pH of the solution is 0.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11
calculate the percent ionization of 0.135 m lactic acid in a solution containing 0.0085 m sodium lactate. express the percent ionization to two significant figures.
Answer: The percent ionization of 0.135 m lactic acid in a solution containing 0.0085 m sodium lactate is 10000%.
The percent ionization of 0.135 m lactic acid in a solution containing 0.0085 m sodium lactate is the ratio of the concentration of ionized lactic acid to the total concentration of lactic acid multiplied by 100.
The formula to calculate the percent ionization is:
% Ionization = [([Lactic Acid]i - [Sodium Lactate]) / [Lactic Acid]] × 100
Where [Lactic Acid]i is the concentration of ionized lactic acid and [Sodium Lactate] is the concentration of sodium lactate.
To solve for the percent ionization, we first need to calculate the concentration of ionized lactic acid. This can be done using the following formula:
[Lactic Acid]i = [Lactic Acid] + [Sodium Lactate]
We are given the concentrations of lactic acid and sodium lactate in the solution, so we can now calculate the concentration of ionized lactic acid:
[Lactic Acid]i = 0.135 + 0.0085 = 0.1435 M
Now that we have the concentration of ionized lactic acid, we can use the first formula to calculate the percent ionization:
% Ionization = [(0.1435 - 0.0085) / 0.135] × 100
% Ionization = (0.1350 / 0.135) × 100
% Ionization = 100 × 100
% Ionization = 10000%
To express the percent ionization to two significant figures, we round the answer to 10000% to 2 sig figs: 10000% ≈ 10000%. Therefore, the percent ionization of 0.135 m lactic acid in a solution containing 0.0085 m sodium lactate is 10000%.
Learn more about ionization here:
https://brainly.com/question/28385102#
#SPJ11
if you mix 538 grams in water and bring it to a final volume of 647 ml, what will be the concentration of the resulting solution in g/l? answers cannot contain more than one decimal place.
Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.
The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.
To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.
To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.
Know more about mass here:
https://brainly.com/question/14014782
#SPJ11
what are the trials of Newton's first law of motion? Please help!!
Answer:
the law of inertia
Explanation:
Answer:
Newton's first law of motion states that an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity, unless acted upon by an external force. The trials of Newton's first law of motion are:
Inertia: The tendency of an object to resist changes in its motion, which is a direct consequence of Newton's first law. For example, a book resting on a table will remain at rest unless acted upon by an external force such as someone picking it up or the table collapsing.
Acceleration: If an external force acts on an object, it will accelerate. For example, a ball sitting on a flat surface will not move unless a force is applied, such as someone pushing it. Once the force is applied, the ball will accelerate in the direction of the force.
Equilibrium: When the net force acting on an object is zero, it is said to be in equilibrium. For example, a person standing still on the ground is in equilibrium because the gravitational force pulling them down is balanced by the force of the ground pushing up on them.
Friction: Friction is a force that opposes motion between two surfaces that are in contact with each other. This force is another example of an external force that can affect an object's motion, and is related to Newton's first law because it can cause an object to come to rest if the force of friction is greater than the force applied to the object.
given the glucose level i control mean of 100 mg/dl and the standard deviation is 4 mg/dl, what is the coefficient of variation?
The coefficient of variation is 4%.
Coefficient of variation is the ratio of standard deviation to the mean, expressed as a percentage. It is used to compare the variability of data sets with different means. The formula for calculating the coefficient of variation is:
Coefficient of variation = (standard deviation / mean) x 100
Given the glucose level control mean of 100 mg/dl and the standard deviation is 4 mg/dl, the coefficient of variation can be calculated as follows:
Coefficient of variation = (standard deviation / mean) x 100
Coefficient of variation = (4 / 100) x 100
Coefficient of variation = 4%
Therefore, the coefficient of variation is 4%.
To know more about coefficient of variation, refer here:
https://brainly.com/question/13293164#
#SPJ11
what are the effects of acid rain and what methods can be used to neutralize it? how does ph level change play a role?
Acid rain effects are detrimental to the environment. The most common method to neutralize acid rain is Lime Neutralization. When the pH level decreases, Acid rain becomes too acidic, and it can have an adverse effect on the environment
The acid rain causes the water to become too acidic and the pH level decreases. It is very harmful to plants and wildlife. It damages buildings and monuments and also affects the water bodies. It affects the aquatic life, and the creatures living in it. It is essential to prevent this from happening.
Several methods can be used to neutralize acid rain. They are as follows:
Lime neutralization: It is one of the most common methods to neutralize acid rain. It is a process in which lime is added to the water body to neutralize the acid content.
Buffering: The buffering capacity is used to treat the water. Buffering capacity is the ability of the water to neutralize acid. The water with a higher buffering capacity will neutralize more acid than the water with less buffering capacity.
Gas scrubbing: It is a process in which the smokestacks from factories and other industries are fitted with scrubbers. These scrubbers help in trapping the pollutants that are released into the atmosphere.
The pH level change plays a significant role in acid rain. When the pH level decreases, it becomes too acidic, and it can have an adverse effect on the environment. It can cause the aquatic life to die, and it can damage the buildings and monuments. It is crucial to control the pH level to prevent such damage. The pH level of 7 is considered neutral. The pH level lower than 7 is acidic, and higher than 7 is alkaline. Hence, it is essential to control the pH level to prevent damage from acid rain.
Thus, Acid rain effects are detrimental to the environment. And it is very important to prevent and control the pH level to prevent damage from acid rain.
To know more about Acid Rain, refer here:
https://brainly.com/question/22143130#
#SPJ11
a 78.0 ml 78.0 ml portion of a 1.70 m 1.70 m solution is diluted to a total volume of 218 ml. 218 ml. a 109 ml 109 ml portion of that solution is diluted by adding 115 ml 115 ml of water. what is the final concentration? assume the volumes are additive.
The final concentration of a solution after dilution can be calculated using the formula C1V1 = C2V2, C2 and V2 are the final concentration and volume. The final concentration of the solution after the second dilution is 0.309 M.
To find the final concentration of the diluted solution, we can use the formula: C1V1 = C2V2. Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume. First, we dilute a 78.0 ml portion of a 1.70 M solution to a total volume of 218 ml. Using the formula, we can find the final concentration: [tex](1.70 M)(78.0 ml) = C2(218 ml)[/tex]
[tex]C2 = (1.70 M)(78.0 ml) / (218 ml)[/tex]
[tex]C2 = 0.610 M[/tex]
[tex]C1V1 = C2V2[/tex]
[tex](0.610 M)(109 ml) = C2(109 ml + 115 ml)[/tex]
[tex]C2 = (0.610 M)(109 ml) / (109 ml + 115 ml)\\\C2 = 0.309 M[/tex]
Therefore, the final concentration of the solution after the second dilution is 0.309 M.
To know more about initial concentration, here
brainly.com/question/30609774
#SPJ4
Perform the following conversion (a) 2.41x10² cm to meters
Answer:
2.41 m
Explanation:
2.41×10×10=241cm
241÷100=2.41
what is the specific heat capacity of a 50-gram piece of 1000c metal that will change 400 grams of 200c water to 220 c?
The specific heat capacity of the metal was determined to be 1,600 J/g°C
The specific heat capacity of a 50-gram piece of 1000°C metal is the amount of energy required to raise the temperature of the metal by 1°C.
In order to raise 400 grams of 200°C water to 220°C, it would take 80,000 joules of energy (400g x (220-200) x 4.18 J/g°C). Therefore, the metal must provide 80,000 J of energy to raise the temperature of the water.
In order to determine the specific heat capacity of the metal, we must divide the energy required to raise the temperature of the water by the mass of the metal and the temperature change.
Therefore, the specific heat capacity of the metal is 1,600 J/g°C (80,000/50g x (1000-800)°C).
Specific heat capacity is an important concept in thermodynamics, which describes the amount of energy needed to change the temperature of a substance.
It is a measure of a material's ability to store thermal energy, and it can be used to calculate the amount of energy required to raise or lower the temperature of a given mass of material.
In this example, the specific heat capacity of the metal was determined to be 1,600 J/g°C. This means that, for every gram of metal, 1,600 joules of energy are required to raise its temperature by 1°C.
to know more about heat capacity refer here:
https://brainly.com/question/28921175#
#SPJ11
How many molecules are there in 4.00 moles of glucose, c6h12o6
Answer: There are 2.41 * 102 molecules in 4.00 moles of glucose.
Explanation: Glucose is C6H12O6, and Avogadro's Number (named for Amadeo Carlo Avogadro 1776 – 1856) tells us that 1 mole contains 6.022 x 10^23 molecules. So, 4.0 moles contains 4 x 6.022 x 10^23 = 2.409 x 10^24 molecules.