The Mississippi River system is the largest drainage basin, or watershed, in the United States.
A watershed is an area of land that drains water into a particular river, lake, or other body of water. The Mississippi River system includes a vast network of tributaries, or smaller rivers that flow into it, stretching from the Rocky Mountains in the west to the Appalachians in the east. It encompasses all or part of 31 states and covers over 1.2 million square miles of land. The Mississippi River system plays a vital role in transportation, recreation, and agriculture, as well as providing habitat for a diverse array of plant and animal species.
Learn more about watershed here: https://brainly.com/question/14361711
#SPJ11
what benefits do green roofs provide? (explain the following topics)
Water
Energy
The benefits provided by green roofs include:
Water management Energy efficiencyWhat are green roofs and how do they benefit us ?Green roofs can help to manage stormwater runoff by absorbing and retaining rainwater in the vegetation and soil layers. This reduces the amount of water that enters stormwater systems and can help to prevent flooding and erosion.
Green roofs can help to reduce the energy consumption of buildings by providing insulation and reducing the amount of heat that is absorbed by the roof. The vegetation and soil layers act as an insulating layer, helping to keep buildings cooler in the summer and warmer in the winter.
Find out more on green roofs at https://brainly.com/question/19109458
#SPJ1
along a curving road cut, two different apparent dips on the same contact between a limestone bed and a shale bed were measured. the first was 42, n30w and the second was 58, s70w. what is the strike and dip of the contact?
The strike of the contract is 130° and dip of the contact is 67.7°.
A geologic map is a type of map that shows the distribution of different types of rocks, minerals, and other geological features on the Earth's surface. It is used by geologists to study and understand the structure and history of the Earth's crust.
To find the strike and dip of the contact between the limestone and shale beds, we can use the following method:
Find the trend of each of the two measurements by subtracting the plunge direction (given as a compass direction) from either 360 degrees or 180 degrees, depending on the hemisphere. In this case, both measurements have different hemispheres, so we need to adjust accordingly:Therefore, the strike of the contact is 130° and the dip is -39.8° or 67.7°, depending on which measurement is used.
Learn more about geologic map: brainly.com/question/28327015
#SPJ11
pls do this asap as soon as possible
Based on the current growth rate, you can predict that the population of Rio de Janeiro in 2040 should be between 21 million and 22 million.
How to calculate the growth rate of Rio de Janeiro in 2040?We start by finding the current growth rate by looking at the population of 2010 and 2015.
Population in 2010 = 11.5 million
Population in 2015 = 11.9 million
Difference is 0.4 million
Using the difference of 0.4, the population growth rate will be calculated as;
11.9 + (2040 - 2015)(0.4)
= 11.9 + (25 x 0.4)
= 11.9 + 10
= 21.9
Considering that the population growth throughout the years does not have a uniform interval, you can only predict that the population of Rio de Janeiro should be between 21 and 22 million.
Find more information on population growth;
https://brainly.com/question/18415071
#SPJ1
basalt is an igneous rock that can be found in which volcanic environment?group of answer choicesmid-ocean ridge volcanismhot spot volcanismsubduction zone volcanism
Basalt is an igneous rock that is most commonly found in volcanoes that form due to subduction zone volcanism.
Subduction zone volcanism is a type of volcanism occurs when one of the Earth's tectonic plates moves beneath another and sinks into the mantle. As the two plates grind against each other, the pressure causes magma to rise up through the lithosphere, forming a volcano.
Basalt is composed of minerals like pyroxene, plagioclase, and olivine, and it forms from the cooling and solidification of lava that is created when the magma rises and erupts. Basalt is one of the most common volcanic rocks and is often used to construct structures such as roads, pathways, and buildings.
For more such questions on Basalt.
https://brainly.com/question/30670942#
#SPJ11
further west from this deep u.s. trough, eastern alaska, as well as yukon and british columbia, canada, were being impacted by a . a. ridge b. trough g
Further west from the deep U.S. trough, Eastern Alaska, as well as Yukon and British Columbia, Canada, were being impacted by a ridge.
A ridge of high pressure is impacting Eastern Alaska, Yukon and British Columbia in Canada, further west from the deep U.S. trough. A ridge of high pressure is an area of high atmospheric pressure, which is associated with fair weather, light winds and generally pleasant conditions. This ridge is formed when two air masses move away from each other, causing the air pressure in the area to increase. A ridge is typically indicated on a weather map by a line of red L's. The L's are placed on the map in the direction of the wind flow around the ridge, with the point of the L representing the area of highest atmospheric pressure.
The increased atmospheric pressure caused by the ridge produces lighter winds and warmer temperatures. The warmer temperatures and decreased wind speeds generally lead to more stable weather conditions and less precipitation. The ridge can also bring dry and sunny conditions, as well as a decrease in storm activity. These effects can be felt further downwind of the ridge, making it a welcomed feature in many areas.
In contrast, a trough is typically associated with low-pressure areas that produce wet, stormy weather conditions, as well as cool temperatures. This is because the low-pressure system promotes the formation of clouds and precipitation, which can reduce the amount of solar radiation that reaches the Earth's surface.
For more such questions on Ridge.
https://brainly.com/question/3404002#
#SPJ11
how might a wildfire influence mass movement? view available hint(s)for part a how might a wildfire influence mass movement? by drying out (removing the water) from the regolith on a slope, wildfires decrease the likelihood of a mass-movement event. the ash from the wildfires lands on the slope, adding enough mass to instigate mass movement. a wildfire can dry out the regolith on a slope, making it less cohesive and more likely to travel downward. because plants on a slope bind the regolith with their roots and shield the soil surface from raindrops, a wildfire that destroys these plants would render the soil looser and more susceptible to the erosional force of rain. wildfires burn only at the bottom of a slope, which oversteepens the slope and induces mass movement.
Wildfire eliminates plants that anchor the soil. It makes the soil dry and loose and more easily able to move down steep slopes.
An unplanned, uncontrolled, and unpredictable fire in an area of flammable vegetation is known by several names, including wildfire, fire in forests, bushfire, wildland fire, and rural fire. An uncontrolled fire within a forest, grassland, brushland, or land planted with crops is referred to as a wildfire or wildland fire.
The most common source of naturally occurring wildfires is lightning. Depending on the situation, there can also be fires caused by volcanoes, meteors, and coal seams. Wildfires started by people might be the result of negligence, arson, or accident.
Learn more about the Wildfire here:
https://brainly.com/question/15568736
#SPJ12
which of the following describe the san andreas fault? multiple select question. a. it is located along the boundary between the north american plate and the pacific plate. b. it is made of different segments that have different tectonic behaviors.
c. it is located along a subduction zone. d. it is located in california. the 1906 san francisco earthquake is the most recent to occur along the fault.
The San Andreas Fault can be described by the following options: a. it is located along the boundary between the North American Plate and the Pacific Plate, b. it is made of different segments and d. it is located in California..
San Andreas Fault:The San Andreas Fault is located along the boundary between the North American Plate and the Pacific Plate, and it is made up of different segments that have different tectonic behaviors. This is the description that describes the San Andreas Fault.
Therefore, the correct options are: It is located along the boundary between the North American Plate and the Pacific Plate. It is made of different segments that have different tectonic behaviors. It is located in California. The 1906 San Francisco earthquake is the most recent to occur along the fault.
The San Andreas Fault is one of the most prominent geological features of California. It runs along the western coast of the United States, running through California's most populous cities, and it is responsible for producing many earthquakes over the years.
To know more about San Andreas fault
visit
https://brainly.com/question/11096257
#SPJ11
what concepts can be explained using this diagram? the movement of water between the oceans and the land
The diagram is about the movement of water between the oceans and the land, and the concepts that can be explained using it are:
evaporation, condensation, precipitation, and transpiration.What is the Water Cycle?
The water cycle, also known as the hydrologic cycle, describes how water moves on, below, and above the surface of the planet. The water cycle explains how water moves from one place to another on Earth and how it changes forms.
It's a never-ending cycle that goes through a variety of stages. The movement of water between oceans and land is one of the steps of the water cycle. Water is returned to the oceans through this process, which is known as surface runoff. Evaporation, condensation, precipitation, and transpiration are the processes that make up the water cycle. Water is transformed from one phase to another in the water cycle. It can be a solid, liquid, or gas at various points in the cycle. Water vapor (gas) is produced during evaporation, which occurs when water is heated or exposed to sunlight. Water vapor rises into the air as a result of this. When the water vapor cools, it condenses and becomes tiny droplets, forming clouds. Precipitation occurs when these droplets become too heavy and fall back to the ground in the form of rain, snow, sleet, or hail. Transpiration, on the other hand, is the process by which plants release water vapor into the air. Surface runoff, which transports water from land to oceans, is the last stage of the water cycle.
To know more about Water Cycle refer here:
https://brainly.com/question/1151425
#SPJ11
this week, the biden administration approved a controversial oil drilling project called the willow project in what u.s. state?
Alaska
Loa Angels
Paris
Munich
The controversial oil drilling project called the Willow project has been approved by the Biden administration, which will be located in the US state of Alaska. The correct option is Alaska.
The Willow project is a proposed oil drilling project by the US oil company ConocoPhillips. The company plans to develop the project on Alaska's North Slope. The Willow project includes the construction of five drill sites, an airstrip, about 28 miles of ice roads, and 85 miles of pipelines, among other facilities. The Willow project is a controversial project because it could harm the wildlife and habitat of the area.
Moreover, environmentalists argue that the project's carbon footprint will contribute to climate change, a matter of global concern. Therefore, environmentalists and other groups are opposing the Willow project, and some have even sued the US government to halt the project. Nonetheless, the Biden administration has approved the Willow project. Alaska is the US state where the Biden administration approved a controversial oil drilling project called the Willow project.
Alaska is the northernmost state of the United States of America. It is the largest state of the country by area and is the 3rd least populated state. Alaska is famous for its rugged, remote wilderness areas, glaciers, mountains, abundant wildlife, and hunting and fishing opportunities. The correct option is Alaska.
For more about controversial:
https://brainly.com/question/14662415
#SPJ11
The characteristics of __________ deserts include high temperatures in summer; greater evaporation than precipitation; considerable variation in the occurrence of precipitation, its intensity and distribution; and low humidity.
"The characteristics of hot deserts include high temperatures in summer; greater evaporation than precipitation; considerable variation in the occurrence of precipitation, its intensity and distribution; and low humidity."
Hot deserts are characterized by extreme temperatures in summer, with daytime temperatures often reaching above 40°C. The combination of high temperatures and low humidity can make these environments challenging for human habitation. These arid regions typically receive very little rainfall, and what precipitation does occur is often sporadic and highly variable in intensity and distribution.
As a result, evaporation rates are typically much higher than precipitation rates, leading to a scarcity of water and limited vegetation. Despite these challenges, hot deserts are home to a variety of unique plant and animal species that have adapted to survive in these harsh conditions.
Learn more about deserts https://brainly.com/question/25806979
#SPJ11
which is the result of the pacific ocean being the location of many convergent plate boundaries? group of answer choices
The result of the Pacific Ocean being the location of many convergent plate boundaries is that it is home to many active volcanoes, earthquakes, and tsunamis.
The Pacific Ocean is an area of the earth that experiences a lot of geological activity. This activity is due to the fact that the Pacific Ocean is located near a lot of convergent plate boundaries. Convergent plate boundaries are the areas where two or more tectonic plates move towards each other. When these plates converge, they can form different geological features such as mountains, volcanoes, and earthquakes.
When two oceanic plates collide, one plate will be forced down beneath the other in a process known as subduction. This process creates deep trenches and can lead to the formation of volcanoes on the upper plate. The Pacific Ocean is home to the Pacific Ring of Fire, which is a region characterized by high volcanic and seismic activity.
The Ring of Fire is a chain of mountains, volcanoes, and deep-sea trenches that are located around the Pacific Ocean. The region is known for its violent earthquakes and tsunamis, which are often caused by the movement of tectonic plates. Overall, the Pacific Ocean is a prime example of how geological activity can shape our planet.
To know more about Pacific Ocean, refer here:
https://brainly.com/question/18577474#
#SPJ11
the tropical rain forest climate receives most of its rainfall as a result of question 49 options: frontal uplift. convectional uplift. orographic uplift. both convectional and frontal uplift.
Tropical rainforest climate receives most of its rainfall due to convectional uplift and frontal uplift.
Convectional uplift is the reason for most of the rainfall in the tropical rainforest climate. Convectional uplift is caused when hot air rises, expands and cools down in the atmosphere.
When this occurs, the water vapor contained in the air cools, reaches a saturation point and falls back to the earth as rain. The tropical rainforest climate is mostly found near the equator, which is the area of the world that receives the most direct sunlight.
This solar energy heats up the air and causes convectional uplift, which leads to the formation of clouds and precipitation. Therefore, the tropical rainforest climate receives most of its rainfall due to convectional uplift. In summary, the correct option is Both convectional and frontal uplift.
For such more question on rainforest:
https://brainly.com/question/23743940
#SPJ11
which geographic feature accounts for the isolated arc of highlands climate north of italy? alps mountains pyrenees mountains north european plain carpathian mountains
The geographic feature that accounts for the isolated arc of highlands climate north of Italy is the a) Alps mountains.
The Alps are a vast mountain range stretching across several countries in Europe, including Italy, France, Switzerland, and Austria. These mountains act as a barrier, separating the Mediterranean climate of Italy from the cooler, continental climate of central and northern Europe.
The high peaks of the Alps intercept moisture from prevailing westerly winds, causing precipitation and creating a distinctive highland climate characterized by colder temperatures and more precipitation than surrounding areas.
This climate, in turn, affects vegetation patterns and agricultural practices in the region, making it an important factor in shaping the cultural and economic landscape of northern Italy.
For more questions like Alps mountains click the link below:
https://brainly.com/question/15480250
#SPJ11
The Alps Mountains account for the isolated arc of highlands climate north of Italy. The Alps are a large mountain range that span across parts of France, Switzerland, Italy, Germany, and Austria. This mountain range is responsible for creating a barrier that blocks cold, arctic air from the north and helps to create the highland climate.
The Alps are a major mountain range in Europe, stretching approximately 1,200 kilometers (750 miles) across eight countries: France, Switzerland, Italy, Austria, Germany, Liechtenstein, Slovenia, and Monaco. They are the highest and most extensive mountain range system that lies entirely in Europe, with the highest peak being Mont Blanc, which stands at 4,809 meters (15,778 feet) tall. The Alps are known for their stunning beauty and are a popular destination for skiing, hiking, and other outdoor activities. The region is also known for its rich cultural heritage, with each country and region having its own unique traditions and customs.
Learn more about Alps mountains: brainly.com/question/357591
#SPJ11
which way would wind travel in the region between 30 and 60 degrees latitude if earth stopped rotating?
Wind travels in an east-to-west direction between 30 and 60 degrees latitude when Earth is not rotating. This is due to the Coriolis effect, which is caused by Earth's rotation.
The Coriolis effect causes winds to be deflected to the right of their path of motion in the Northern Hemisphere, and to the left of their path of motion in the Southern Hemisphere. This causes winds to blow from the east in the Northern Hemisphere and from the west in the Southern Hemisphere, resulting in an east-to-west wind pattern between 30 and 60 degrees latitude.
In this region, winds will typically be weak and variable. This is because it is far enough away from the equator for air to not be strongly heated, resulting in weak pressure gradients and variable winds.
Additionally, the Coriolis force is weak in this region and can be overpowered by pressure differences and other forces, resulting in variable winds. Therefore, the direction of the winds in this region will vary depending on the atmospheric conditions and pressure patterns at any given time.
To learn more about Coriolis force here:
https://brainly.com/question/1757337#
#SPJ11
which of the following is not a low-latitude climate region? mansoon wet equatorial dry tropical tropical savanna humid subtropical
Answer: A low latitude climate is a tropical climate, exemplified by areas in or near the equator.
What are the similarities and differences between the physical map of North American and the Caribbean?
Explanation:
Similarities:
Both North America and the Caribbean are located in the western hemisphere.
Both regions have a mix of coastal plains, mountains, and plateaus.
Both regions have numerous rivers, lakes, and other bodies of water.
Both regions are prone to natural disasters such as hurricanes, earthquakes, and volcanic eruptions.
Differences:
Size: North America is much larger than the Caribbean, which is a relatively small region of islands and coastal areas.
Landforms: North America has a much wider variety of landforms than the Caribbean, including vast prairies, deserts, and the massive Rocky Mountains. The Caribbean, on the other hand, is dominated by island chains and coastal plains.
Climate: North America has a wider range of climates, from the icy tundras of the north to the hot and humid tropics of the south. The Caribbean has a tropical climate throughout the year.
Natural Disasters: While both regions are prone to natural disasters, the Caribbean is more vulnerable to hurricanes and tropical storms due to its location in the hurricane belt.
using maple syrup as an analogy for magma, what do you do to your syrup to decrease its viscosity so that it flows more evenly over your stack of waffles?
To decrease the viscosity of the syrup so that it flows more evenly over the stack of waffles, you should heat it.
Just like magma, which needs to be heated to reduce its viscosity and increase its fluidity, maple syrup also becomes more fluid as it is heated.
What is the meaning of viscosity?
The term viscosity is defined as the internal resistance or friction between the molecules of a fluid that opposes the fluid's movement when a force is applied to it. The viscosity of the fluid is directly proportional to the internal friction of the fluid. The viscosity of a fluid is generally high at low temperatures and low at high temperatures.
Viscosity can be reduced by a variety of methods, the most common of which is heating the fluid.
When heated, the internal friction between the fluid's molecules decreases, making it easier for the fluid to flow. This is analogous to the behavior of magma. When magma is heated, its viscosity decreases, allowing it to flow more readily.
To know more about viscosity, refer here:
https://brainly.com/question/2193315
#SPJ11
you are in michigan. news reports on climate change focus on sea level rise on the coasts and flooding in california. how would this influence your perception of the risk from climate change?
News reports on climate change focusing on sea level rise on the coasts and flooding in Michigan would not directly influence.The perception of the risk from climate change in Michigan.
However, it is important to note that Michigan is not immune to the effects of climate change. It is experiencing its own set of climate-related challenges, such as increased frequency and severity of extreme weather events. It is crucial to recognize that climate change poses unique risks and vulnerabilities to each region and take action to mitigate and adapt to these impacts in Michigan.
Michigan may be more susceptible to extreme weather events like floods, heat waves, or droughts.It is crucial to assess the local impacts of climate change in Michigan and take necessary steps to mitigate and adapt to them.
To learn more about climate change:
https://brainly.com/question/24793273
#SPJ4
which tectonic plates are responsible for the majority of seismic activity in the alpine-himalayan belt?
The Indo-Australian and Eurasian plates are responsible for the majority of seismic activity in the Alpine-Himalayan belt.
What is the Alpine-Himalayan Belt?
The Alpine-Himalayan Belt is a zone of convergence formed as a result of the collision of the Indian Plate with the Eurasian Plate. It stretches from the Mediterranean Sea through the Alps, Caucasus Mountains, and into Central Asia and the Himalayas.
The zone is referred to as a "collisional" or "convergent" boundary, where two plates move toward one another. These two plates are the Indian Plate and the Eurasian Plate.
As a result of the collision, the northern portion of the Indian Plate has been pushed upwards, resulting in the formation of the Himalayan mountain range.
The Himalayas are one of the most seismically active regions globally. The main tectonic activity in the region is due to the collision of the Indo-Australian Plate and the Eurasian Plate.
The two tectonic plates are pushing against one another, causing the land to uplift, leading to the formation of the Himalayas. This collision of two plates causes seismic activity, which is responsible for the majority of seismic activity in the Alpine-Himalayan belt.
To learn more about alpine-Himalayan belt, refer below:
https://brainly.com/question/29103156
#SPJ11
Match the seismic hazard with the correct definition.
Tsunami, subsidence, liquefaction, and seiche
1.) Rhythmic sloshing of water in lakes and enclosed basins
2.) Seismic energy transforms stable soil into mobile material incapable of supporting buildings
3.) Collapse and lowering of the land surface
4.) Large ocean waves generated.
The seismic hazard with the correct definition would be a seismic hazard is a seismic occurrence that may cause injury, loss of life, or property damage. The seismic hazards listed below are classified based on the type of event and its impact on the environment, infrastructure, and population.
Tsunami is a large ocean wave generated. Subsidence is the collapse and lowering of the land surface. Liquefaction refers to seismic energy that transforms stable soil into mobile material incapable of supporting buildings. Seiche is the rhythmic sloshing of water in lakes and enclosed basins.Seismic hazard is an inevitable part of living on our planet, particularly in areas where seismic activity is more prevalent.
Learn more about Liquefaction :- https://brainly.com/question/4067457
#SPJ11
2. given a mean earth radius of 20,906,000 ft, and an observation latitude of n 47 degrees, what is the arc distance of one second of longitude and one second of latitude?
At 47 degrees latitude, one second of longitude is equivalent to about 49.03 feet of arc distance, whereas one second of latitude is equivalent to about 100.76 feet of arc distance.
The following formula can be used to determine the arc distance of one second of longitude at a specific latitude:
Mean Earth Radius x Cosine of Latitude x Arc Distance (angular distance)
where 1/3600 degrees is the angular distance (since there are 3600 seconds in one degree). When we enter the values from the issue, we obtain:
One second's worth of longitude is represented by the formula (20,906,000 ft) x (cosine 47) x (1/3600) = 49.03 ft.
Similarly, the formula: can be used to get the arc distance of one second of latitude.
(Mean Earth Radius) x = arc distance (angular distance)
When we enter the values from the issue, we obtain:
One second of latitude is equal to 20 906,000 feet multiplied by 1/36 equals 100.76 feet.
learn more about latitude here:
https://brainly.com/question/28606059
#SPJ4
which correctly lists in seismic waves in order from slowest to fastest holding all other variables constant?
The correct list of seismic waves in order from slowest to fastest holding all other variables constant is as follows:
Surface waves or L waves, Longitudinal or P waves, Transverse or S waves, Surface waves or L waves are the slowest seismic waves.
These waves travel through the Earth's outer crust, causing most of the damage during an earthquake. The longitudinal or P waves travel faster than the L waves and arrive first during an earthquake.
These waves pass through the earth's crust and are transmitted through solid, liquid, and gaseous materials.
The Transverse or S waves travel slower than the P waves and cannot pass through liquids, making it unable to travel through the outer core of the Earth.
These waves cause rocks to move up and down or from side to side, making it more destructive than P waves.
Hence the correct list of seismic waves in order from slowest to fastest holding all other variables constant is Surface waves or L waves, Longitudinal or P waves, and Transverse or S waves.
Surface waves are the slowest type of seismic wave and only travel along the Earth's surface. They are caused by the interaction of P-waves and S-waves with the Earth's surface and can cause the most damage during an earthquake.
There are two types of surface waves: Love waves, which move side-to-side, and Rayleigh waves, which move in a circular motion.
Understanding the order of seismic waves is crucial in seismology, the study of earthquakes, as it helps scientists determine the location, magnitude, and type of earthquake.
P-waves are typically the first waves detected by seismic instruments, followed by S-waves and surface waves.
By analyzing the characteristics of each type of wave, scientists can better understand the properties of the Earth's interior and predict earthquake hazards.
To know more about seismic waves, refer here:
https://brainly.com/question/13056218
#SPJ11
__________ Earth Creation scientists believe that it takes millions of years to form a canyon like the Grand Canyon.
Old Earth Creation scientists believe that it takes millions of years to form a canyon like the Grand Canyon.
Old Earth Creationism is a Christian doctrine that holds that God created the Earth over a period of several billion years, according to scientific estimates. This perspective is in contrast to young-earth creationism, which claims that the Earth is just 6,000 to 10,000 years old.
Old Earth Creationism accepts the scientific evidence for the age of the Earth and the universe. They believe that God created the universe and life but that He did so over a much longer period of time than the six-day timespan described in the Bible. Old Earth Creationists frequently criticize young-earth creationists for denying scientific evidence, particularly concerning the age of the Earth and the universe.
Learn more about Creationism at https://brainly.com/question/901186
#SPJ11
which of the following features of sedimentary rocks is not a sedimentary structure? mud cracks graded bedding stratification lithology (rock type) ripples
Lithology (rock type) is not a sedimentary structure. Therefore the correct option is option C,
Sedimentary rocks are often seen with sedimentary structures. These are features in sedimentary rocks that are distinctive from primary sedimentary layers.
The rocks’ structure is a result of sedimentary processes such as deposition and the transportation of sedimentary grains. Sedimentary rocks are those that have been formed through sedimentation and consolidation of mineral and organic particles.
Sedimentary structures are used to classify sedimentary rocks. In comparison to primary sedimentary layers, these features have distinctive characteristics. Sedimentary structures include cross-bedding, graded bedding, mud cracks, ripple marks, and more.
Sedimentary structures, on the other hand, relate to the features seen within sedimentary rocks that result from sedimentation and consolidation of mineral and organic particles. Therefore the correct option is option C,
For such more question on Lithology:
https://brainly.com/question/25284195
#SPJ11
The following question may be like this:
which of the following features of sedimentary rocks is not a sedimentary structure?
mud cracks graded bedding stratification lithology (rock type) ripples__________ are used to prevent the erosion of sand from beaches. They allow the wind and water to blow through, but they help to prevent the movement of sand.
Answer:
are used to prevent the erosion of sand from beaches. They allow the wind and water to blow through, but they help to prevent the movement of sand.
Explanation:
desert
Sand Dunes are used to prevent the erosion of sand from beaches. They allow the wind and water to blow through, but they help to prevent the movement of sand.
Sand dunes are critical coastal features, providing natural buffers against powerful ocean waves and wind. They absorb the energy of storm surges and act as barriers to protect inland areas. They are also habitats for a range of plants and animals, many of which are threatened by human activities and development. Dunes, often some of the most noticeable and recognizable features of a beach, can be created by a variety of wind patterns and types of sand, and can cover vast land areas with mounds of sand. They also play a vital role in the overall ecosystem of a beach area, both physically and ecologically.
Learn more about Sand dunes here: https://brainly.com/question/1429841
#SPJ11
the plantation system of agriculture in the caribbean largely concentrated on what form of agriculture?
The plantation system of agriculture in the Caribbean was mainly concentrated on the cultivation of sugarcane.
The plantation system refers to the organization of agricultural production in which plants are cultivated on a large scale for commercial purposes, mainly for export. This system, which started in the Americas in the 16th century, was initially introduced to grow cash crops like tobacco and sugarcane, which were then exported to Europe and other parts of the world for profits.
The Caribbean was one of the regions where the plantation system thrived. The plantation system in the Caribbean was established during the 17th and 18th centuries by the European colonizers. The plantation system involved the large-scale cultivation of crops like sugar cane, cotton, and tobacco by African slaves. The main crops cultivated were sugarcane and cotton.
The plantation system of agriculture in the Caribbean mainly focused on the cultivation of sugarcane. This crop was considered the most profitable, and it was grown on a large scale by African slaves who were brought to the Caribbean to work on the plantations. Sugarcane required a lot of labor, and the plantation owners relied on the enslaved Africans to work the land. Sugarcane was grown in large quantities and processed into sugar, molasses, and rum. These products were then exported to Europe, where they were sold for high prices.
The plantation system in the Caribbean was one of the most profitable systems of agriculture during the 18th and 19th centuries.
To know more about the "plantation system": https://brainly.com/question/1225457
#SPJ11
I just need some information I can use please and thank you 50 points
Don’t use the same one with the other just need info
"The Spanish colony of Mexico City, established in the early 1500s, quickly became the most important settlement in Mexican history. Since then, it has grown and developed into the largest city, and capital, of Mexico."
Identify the bias and fallacious argument of the passage above. You may need to conduct quick research to find more information on the topic.
Answer:
There does not appear to be any clear bias or fallacious argument in the passage above. It simply presents historical facts about the establishment and growth of Mexico City, without any apparent attempt to distort or manipulate the information. However, it is worth noting that the passage only presents a positive view of the city's importance and development, without acknowledging any potential negative aspects such as social inequality or environmental challenges.
which low-grade metamorphic rock, composed of extremely fine-sized mica and other mineral grains, typically exhibits well-developed rock cleavage? group of answer choices hornfels quartzite schist slate
The low-grade metamorphic rock that is composed of extremely fine-sized mica and other mineral grains, and typically exhibits well-developed rock cleavage, is slate.
Slate is composed of a number of minerals including mica, quartz, and clay minerals, and has a foliated structure. This foliated structure allows it to split along well-developed planes of cleavage which are parallel to the foliation. Slate is composed mainly of very fine-sized mica minerals and other mineral grains, such as quartz, feldspar, and chlorite. The mica minerals in slate are typically muscovite and biotite, which have a platy or flaky structure that allows them to align themselves in a parallel orientation, giving the rock its distinctive cleavage
Know more about metamorphic rock here:
https://brainly.com/question/19930528
#SPJ11
in what geologic setting are violent volcanic eruptions most likely to occur? transform fault volcanic arcs hot spot beneath oceanic lithosphere mid-ocean ridge
In the geologic setting, violent volcanic eruptions are most likely to occur in the volcanic arcs and hot spots beneath the oceanic lithosphere.
A volcanic arc is a curved chain of volcanic islands or mountain ranges created by tectonic movements along convergent plate boundaries. These chains of volcanoes are usually found along the edges of continents or beneath the oceans, indicating that these areas are geologically active.
Violent volcanic eruptions: These are explosive types of volcanic eruptions. It releases large volumes of pyroclastic material, ash, and gas into the atmosphere. These eruptions are so violent that they can change the global climate for several years.
The most well-known type of violent volcanic eruption is a Plinian eruption, named after Pliny the Younger, who observed the 79 AD eruption of Mount Vesuvius in Italy. This type of eruption produces a massive, towering column of gas, ash, and rock that can travel more than 30 km (20 mi) into the sky.
Examples of volcanic arcs:
Japan's islands are a good example of volcanic arcs. It is created by the collision between the Pacific Plate and the Philippine Sea Plate. The Aleutian Islands, which stretch from Alaska to Russia, are also a volcanic arc formed by the collision of the Pacific Plate and the North American Plate. The Andes are another example of a volcanic arc, formed by the collision of the South American Plate with the Nazca Plate.Hotspots under the oceanic lithosphere happen when magma comes up from deep inside the Earth and forms a hot column of material that melts through the oceanic plate above it. This results in a series of volcanic islands, like the Hawaiian Islands. These volcanoes can erupt explosively, but they can also have gentler eruptions with lava flows.
To learn more about the "volcanic arcs": https://brainly.com/question/29516835
#SPJ11
floodplains are the flat land that streams will fill with water when they overflow. how are floodplains formed?
Floodplains are flat lands that are filled with water when streams overflow. They are formed due to the deposition of sediments over a long period of time. When a stream flows, it carries sediments along with it.
As the stream enters a plain or an area where it is not flowing at a fast rate, it begins to slow down. Due to this, the sediments carried by the stream start to settle down.
The sediments are deposited at the banks of the stream forming a levee. As the stream continues to deposit sediments, it forms a flat area around it. This flat area is known as the floodplain.
The sediments deposited by the stream over time make the floodplain more fertile than the surrounding areas. This makes it ideal for agriculture.
The formation of floodplains is dependent on the flow rate of the stream. A stream that flows faster will carry larger sediments that will form a levee.
When a stream overflows, it will deposit smaller sediments that will form a flat surface. This is because when the stream overflows, the velocity of the water is reduced, allowing the sediments to settle down.
To know more about Floodplains, refer here:
https://brainly.com/question/17366465
#SPJ11