The light beam shown in the figure below makes an angle of a =20.2 ∘
with the normal line NN in the linseed oll. Determine the anale θ. (The refractive index for linseed oll is 1.48.)
Answers
The angle of refraction of the light beam in the linseed oil is approximately 12.5°.
The light beam shown in the figure below makes an angle of a = 20.2° with the normal line NN in the linseed oil. Determine the angle θ. (The refractive index for linseed oil is 1.48).
The angle of refraction (θ) of the given light beam can be calculated using Snell's law. According to Snell's law of refraction,n₁sinθ₁ = n₂sinθ₂Where, n₁ = refractive index of the first medium, i.e., air (or vacuum), θ₁ = angle of incidence of the light ray, n₂ = refractive index of the second medium, i.e., linseed oil, θ₂ = angle of refraction of the light ray.
In this case, the angle of incidence (θ₁) is 90° since it is perpendicular to the normal line NN. Therefore, sin θ₁ = 1. The refractive index (n₂) for linseed oil is 1.48. The angle of incidence (a) of the light ray with respect to the normal is 20.2°.
Thus, applying Snell's law of refraction,n₁sinθ₁ = n₂sinθ₂⇒ sin θ₂ = (n₁ / n₂) × sin θ₁⇒ sin θ = (1 / 1.48) × sin 20.2°≈ 0.2154⇒ θ ≈ sin⁻¹ 0.2154≈ 12.5°
Therefore, the angle of refraction of the light beam in the linseed oil is approximately 12.5°.
The angle of refraction (θ) is approximately 12.5°. The light beam shown in the figure below makes an angle of a = 20.2° with the normal line NN in the linseed oil. The refractive index for linseed oil is 1.48.
To learn about the refractive index here:
https://brainly.com/question/83184
#SPJ11
Related Questions
In a recent test of its braking system, a Volkswagen Passat traveling at 26.2 m/s came to a full stop after an average negative acceleration of magnitude 1.90 m/s2.
(a) How many revolutions did each tire make before the car comes to a stop, assuming the car did not skid and the tires had radii of 0.325 m?
rev
(b) What was the angular speed of the wheels (in rad/s) when the car had traveled half the total stopping distance?
rad/s
Answers
The Volkswagen Passat's braking system test involved determining the number of tire revolutions and the angular speed of the wheels under specific conditions. a) ≈ 87.53 revolutions b) Angular speed ≈ 8.29 rad/s.
(a) To find the number of revolutions each tire made before the car came to a stop, we can use the relationship between linear motion and rotational motion. The linear distance covered by the car before stopping can be calculated using the equation:
distance = initial velocity² / (2 * acceleration).
Substituting the given values, we find:
distance = (26.2 m/s)² / (2 * 1.90 m/s²) = 179.414 m.
Since each revolution covers a distance equal to the circumference of the tire (2π * radius), we can find the number of revolutions by dividing the distance covered by the circumference of the tire.
The number of revolutions =[tex]distance / (2\pi * radius) = 179.414 m / (2\pi * 0.325 m) \approx 87.53[/tex] revolutions.
(b) To determine the angular speed of the wheels when the car had travelled half the total stopping distance, we need to find the time it took for the car to reach that point. The distance travelled when the car had travelled half the total stopping distance is half of the total distance covered before stopping, which is 179.414 m / 2 = 89.707 m. Using the equation:
[tex]distance = initial velocity * time + (1/2) * acceleration * time^2[/tex]
For solve in time. Rearranging the equation and substituting the given values,
[tex]time = (\sqrt((initial velocity)^2 + 2 * acceleration * distance) - initial velocity) / acceleration[/tex]Substituting the values,
[tex]time = (\sqrt((26.2 m/s)^2 + 2 * 1.90 m/s^2 * 89.707 m) - 26.2 m/s) / 1.90 m/s^2 = 5.28[/tex] seconds.
The angular speed of the wheels can be calculated using the equation:
angular speed = (final angular position - initial angular position)/time.
Since the car travelled half the total stopping distance, the final angular position is half the number of revolutions calculated earlier.
Angular speed = (0.5 * 87.53 revolutions - 0 revolutions) / 5.28 s ≈ 8.29 rad/s.
Learn more about angular speed here:
https://brainly.com/question/29058152
#SPJ11
Describe in your own words: what is the procedure to solve the Schrödinger equation for
a. A ID potential barrier of height Vo. Discuss what is the difference in the resulting wave function for E>Vo compared to E
{V0 for x≥0 c. The Harmonic oscillator (you do not have to solve the differential equation, just write it down and discuss the solutions and the energy levels)
Answers
The solutions to the Schrödinger equation for a one-dimensional potential barrier and the harmonic oscillator yield different forms of wave functions and energy quantization. For the potential barrier, the wave function consists of incident, reflected, and transmitted waves, while for the harmonic oscillator, the wave functions are given by Hermite polynomials multiplied by a Gaussian factor, and the energy levels are quantized.
To solve the Schrödinger equation for different potential systems, let's consider the two cases mentioned: a one-dimensional (ID) potential barrier of height Vo and the harmonic oscillator.
a. ID Potential Barrier of Height Vo:
For an ID potential barrier, the Schrödinger equation is a second-order partial differential equation. We can divide the system into three regions: x < 0, 0 ≤ x ≤ L, and x > L. Assuming the potential barrier exists between 0 ≤ x ≤ L with a height Vo, we can write the Schrödinger equation in each region and match the solutions at the boundaries.
Region I (x < 0) and Region III (x > L):
In these regions, the potential energy is zero (V = 0). The general solution to the Schrödinger equation in these regions is a linear combination of a left-moving wave (incident wave) and a right-moving wave (reflected wave):
Ψ_I(x) = Ae^{ikx} + Be^{-ikx} and Ψ_III(x) = Fe^{ikx} + Ge^{-ikx}
Region II (0 ≤ x ≤ L):
In this region, the potential energy is Vo, and the Schrödinger equation becomes:
(d^2Ψ_II(x)/dx^2) + (2m/ħ^2)(E - Vo)Ψ_II(x) = 0
Solving this differential equation, we obtain the general solution as:
Ψ_II(x) = Ce^{qx} + De^{-qx}
Here, q = sqrt(2m(Vo - E))/ħ, and m represents the mass of the particle.
To determine the specific form of the wave function for E > Vo (particle with energy greater than the barrier height), we need to consider the behavior at the boundaries. As x → ±∞, the wave function should approach the same form as the incident wave in Region I and the transmitted wave in Region III. Therefore, we have:
Ψ_I(x) = Ae^{ikx} + Be^{-ikx} and Ψ_III(x) = Te^{ikx}
Here, k = sqrt(2mE)/ħ, and T represents the transmission coefficient.
By matching the wave function and its derivative at the boundaries, we can determine the coefficients A, B, F, G, C, D, and the transmission coefficient T.
In summary, for E > Vo, the wave function consists of a combination of an incident wave, a reflected wave, and a transmitted wave. The transmitted wave accounts for the particle passing through the potential barrier.
b. Harmonic Oscillator:
The harmonic oscillator potential represents a system where the potential energy is proportional to the square of the distance from the equilibrium position. The Schrödinger equation for a harmonic oscillator is a second-order differential equation:
-(ħ^2/2m)(d^2Ψ(x)/dx^2) + (1/2)kx^2Ψ(x) = EΨ(x)
Here, k is the force constant associated with the harmonic potential, and E represents the energy of the particle.
The solutions to this equation are given by the Hermite polynomials multiplied by a Gaussian factor. The energy levels of the harmonic oscillator are quantized, meaning they can only take on specific discrete values. The energy eigenstates (wave functions) of the harmonic oscillator are given by:
Ψ_n(x) = (1/√(2^n n!))(mω/πħ)^(1/4) × e^(-mωx^2/2ħ) × H_n(√(mω/ħ)x)
Here, n is the principal quantum number representing the energy level, ω is the angular frequency of the oscillator (related to the force constant k and mass m as ω = sqrt(k/m)), and H_n(x) is the nth Hermite polynomial.
The energy levels of the harmonic oscillator are quantized and given by:
E_n = (n + 1/2)ħω
The solutions to the harmonic oscillator equation are discrete and form a ladder of energy levels, where each level is equally spaced by ħω. The corresponding wave functions become more spread out as the energy level increases.
In conclusion, the solutions to the Schrödinger equation for a one-dimensional potential barrier and the harmonic oscillator yield different forms of wave functions and energy quantization. For the potential barrier, the wave function consists of incident, reflected, and transmitted waves, while for the harmonic oscillator, the wave functions are given by Hermite polynomials multiplied by a Gaussian factor, and the energy levels are quantized.
To learn more about Schrödinger equation visit: https://brainly.com/question/17750570
#SPJ11
both or dont answer
A uniform electric field is directed in the +x-direction and has a magnitude E. A mass 0.072 kg and charge +2.90 mC is suspended by a thread between the plates. The tension in the thread is 0.84 N.
What angle does the thread make with the vertical axis? In degrees
Find the magnitude of the electric force. Answer to 3 sig figs
Answers
The angle the thread makes with the vertical axis is 77.7°. Hence, the magnitude of the electric force is 2.9E-3 x E N and the angle the thread makes with the vertical axis is 77.7°.
Mass of the particle, m = 0.072 kg
Charge on the particle, q = +2.90 mC
Electric field, E = directed in the +x-direction.
The tension in the thread, T = 0.84 N. The force of gravity, Fg = mg = 0.072 kg x 9.8 m/s^2 = 0.7056 N.
First we will find the magnitude of the electric force. Force due to electric field, Fe = q x E= 2.9 x 10^-3 C x E = 2.9E-3 x E N.
The magnitude of the electric force is 2.9E-3 x E N. Now we will find the angle the thread makes with the vertical axis. Let's denote the angle by θ.Fe and T are the horizontal and vertical components of the tension respectively.
Fe = T sin θ T = Fg + T cos θ ⇒ T = Fg/ (1 - cos θ) ⇒ 0.84 = 0.7056/ (1 - cos θ) ⇒ cos θ = (0.7056/0.1344) - 1 = 4.2222 θ = cos-1 (4.2222) = 77.7°.
To know more about electric force
https://brainly.com/question/20935307
#SPJ11
A beam of light strikes the surface of glass (n = 1.46) at an angle of 70° with respect to the normal. Find the angle of refraction inside the glass. Take the inder of refraction of air n₁ = 1.
Answers
The given case is not possible. The given parameters must be incorrect.Conclusion:The given parameters must be incorrect because the value of sin cannot be greater than 1. Hence the angle of refraction inside the glass cannot be calculated.
Given parameters are,n = refractive index of glassn₁ = refractive index of airAngle of incidence (i) = 70°We are required to calculate the angle of refraction (r) inside the glass.To calculate the angle of refraction inside the glass, we can use Snell’s law.Snells law states that the ratio of the sines of the angle of incidence (i) and the angle of refraction (r) is equal to the ratio of the refractive indices of two media. i.e.,sin i / sin r = n1 / n2
Where,n₁ = Refractive index of air = 1n₂ = Refractive index of glass = 1.46sin i / sin r = 1 / 1.46 sin r = (sin i) x (n2 / n1)sin r = sin 70° × (1.46 / 1) = 1.2351The value of sin cannot be greater than 1. Hence, the given case is not possible. The given parameters must be incorrect.Conclusion:The given parameters must be incorrect because the value of sin cannot be greater than 1. Hence the angle of refraction inside the glass cannot be calculated.
Learn more about Refractive here,
https://brainly.com/question/83184
#SPJ11
A 41 kg metal ball with a radius of 6.8 m is rolling at 19 m/s on a level surface when it reaches a 25 degree incline. How high does the ball go?
Answers
The ball rises to a height of 18.5 meters when it reaches a 25-degree incline.
When the 41 kg metal ball reaches a 25 degree incline, the height it goes to can be calculated. Here's how you can calculate the height of the ball:
First, we will calculate the potential energy of the ball by utilizing the formula: potential energy = mass * gravity * height
PE = mgh
Where m = 41 kg, g = 9.81 m/s² (the acceleration due to gravity), and h is the height in meters.
Since the ball is rolling at 19 m/s on a level surface, its kinetic energy will be:
kinetic energy = 0.5 * mass * velocity²
KE = 0.5 * m * v²
KE = 0.5 * 41 * 19²
KE = 7383.5 J
Now, we will equate the potential energy to the kinetic energy since the energy is conserved:
PE = KE => mgh = 7383.5Jh = 7383.5 / (41 * 9.81)h = 18.5 m
Therefore, the ball rises to a height of 18.5 meters when it reaches a 25-degree incline.
Learn more about kinetic energy at: https://brainly.com/question/8101588
#SPJ11
The ink drops have a mass m=1.00×10 −11
kg each and leave the nozzle and travel horizontally toward the paper at velocity v=25.0 m/s. The drops pass through a charging unit that gives each drop a positive charge q by causing it to lose some electrons. The drops then pass between parallel deflecting plates of length D 0
=2.05 cm, where there is a uniform vertical electric field with magnitude E=8.50×10 4
N/C. (Figure 1) Part A If a drop is to be deflected a jistance d=0.260 mm by the time it reaches the end of the deflection plate, what magnitude of charge q must be given to the drop? Assume that the density of the ink drop is 1000 kg/m 3
, and ignore the effects of gravity. Express your answer numerically in coulombs.
Answers
The magnitude of the charge q that must be given to the ink drop to deflect it a distance of 0.260 mm by the time it reaches the end of the deflection plate is approximately [tex]3.529*10^{-14} C.[/tex]
To deflect an ink drop a distance of 0.260 mm by the time it reaches the end of the deflection plate, a certain magnitude of charge q must be given to the drop.
The charge can be determined by considering the electric force acting on the drop and using the given information about the drop's mass, velocity, and the electric field between the deflecting plates.
The electric force acting on the ink drop can be calculated using the equation F = qE, where F is the force, q is the charge, and E is the electric field. Since the drop is deflected vertically, the electric force must provide the necessary centripetal force for the drop to follow a curved path.
The centripetal force acting on the drop can be expressed as Fc = [tex](mv^2)/r[/tex], where m is the mass of the drop, v is its velocity, and r is the radius of curvature. In this case, the radius of curvature is related to the distance of deflection by r = D/2, where D is the length of the deflection plate.
By equating the electric force to the centripetal force, we have qE = (mv^2)/r. Rearranging the equation, we find q = (mvr)/E. Plugging in the given values of[tex]m = 1.00*10^{-11} kg, v = 25.0 m/s, r = D/2 = 2.05 cm/2 = 1.025 cm = 1.025*10^-2 m, and E = 8.50*10^4 N/C,[/tex] we can calculate the magnitude of the charge q.
Substituting the values into the equation, we get [tex]q = (1.00*10^{-11} kg * 25.0 m/s * 1.025*10^{-2 }m)/(8.50*10^4 N/C) = 3.529×10^{-14} C.[/tex]
Learn more about deflection here:
https://brainly.com/question/22953155
#SPJ11
Your friend is a new driver in your car practicing in an empty parking lot. She is driving clockwise in a large circle at a constan speed. Is the car traveling with a constant velocity or is it accelerating?: Since the car is changing direction as it travels around the circle, it has a centripetal acceleration and does not have a constant velocity. The car has a constant speed, so the velocity is constant and there is no acceleration.
Answers
Centripetal acceleration, which points towards the center of the circle, is responsible for this change in direction. Thus, while the car is traveling at a constant speed, it is still accelerating since the direction of its velocity is constantly changing.
The car has a centripetal acceleration and does not have a constant velocity. Although the car is traveling with a constant speed, it is still accelerating.What is acceleration?Acceleration refers to the rate of change of velocity. Acceleration may be either positive or negative. When an object speeds up, it has positive acceleration.
When an object slows down, it has negative acceleration, which is also known as deceleration. When an object changes direction, it experiences acceleration.A car driving in a circle at a constant speed is an example of uniform circular motion.
The car's direction is constantly changing since it is moving in a circular path. As a result, the car's velocity is constantly changing even if its speed is constant.
Centripetal acceleration, which points towards the center of the circle, is responsible for this change in direction.
Thus, while the car is traveling at a constant speed, it is still accelerating since the direction of its velocity is constantly changing.
to know more about Centripetal
https://brainly.com/question/898360
#SPJ11
A trawing content speed of 220 m. comes to an incine with a constant slope while going to the die train ows down with a constant acceleration of magnitude 140 m2 How far hon the traietatied up the incine aber 7808
Answers
The train's initial speed is 220 m/s and it encounters an incline with a constant slope. As it goes up the incline, the train slows down with a constant acceleration of magnitude 140 m^2. The distance traveled by the train up the incline is not provided in the given information.
The given information states that the train experiences a constant acceleration of magnitude 140 m^2 while going up the incline. Acceleration is a measure of how quickly an object's velocity changes over time. In this case, the train's velocity is decreasing as it goes up the incline, indicating that the train is slowing down. The magnitude of the acceleration, 140 m^2, tells us how much the velocity decreases per second. This means that for every second the train travels up the incline, its velocity decreases by 140 m/s. The specific distance traveled by the train up the incline is not provided in the given information.
Learn more about acceleration here;
https://brainly.com/question/460763
#SPJ11
What is the magnitude of the electric field at a point midway between a -6.2 μC and a +5.8 μC charge 10 cm apart? Assume no other charges are nearby, Express your answer using two significant figures. EHC . X-10" E- Value Units Submit Previous Answers Request Answer - X² X GNC
Answers
The magnitude of the electric field at a point midway between a -6.2 μC and a +5.8 μC charge, 10 cm apart, is approximately 1.0 × [tex]10^{4}[/tex] N/C.
To determine the electric field at the midpoint, we can consider the two charges as point charges and apply the principle of superposition. The electric field due to each charge will be calculated separately and then added vectorially.
The electric field due to a point charge can be calculated using the formula:
E = k * (Q / [tex]r^2[/tex])
Where E is the electric field, k is the electrostatic constant (8.99 × [tex]10^9 N m^2/C^2[/tex]), Q is the charge, and r is the distance from the charge.
For the -6.2 μC charge, the distance to the midpoint is 5 cm (half the separation distance of 10 cm). Substituting these values into the formula, we get:
E1 = (8.99 × [tex]10^9 N m^2/C^2[/tex]) * (-6.2 × [tex]10^{-6}[/tex] C) / [tex](0.05 m)^2[/tex]
Calculating this, we find E1 ≈ -1.785 × [tex]10^{4}[/tex] N/C.
For the +5.8 μC charge, the distance to the midpoint is also 5 cm. Substituting these values, we get:
E2 = (8.99 × [tex]10^9 N m^2/C^2[/tex]) * (5.8 × [tex]10^{-6}[/tex] C) / [tex](0.05 m)^2[/tex]
Calculating this, we find E2 ≈ 1.682 × [tex]10^{4}[/tex] N/C.
To find the net electric field at the midpoint, we add the magnitudes of E1 and E2 since they have opposite signs. The magnitude of the electric field is given by:
|E| = |E1| + |E2|
|E| ≈ |-1.785 × [tex]10^{4}[/tex] N/C| + |1.682 × [tex]10^{4}[/tex] N/C|
|E| ≈ 1.0 × [tex]10^{4}[/tex] N/C
Therefore, the magnitude of the electric field at the midpoint is approximately 1.0 × [tex]10^{4}[/tex] N/C.
Learn more about electric field here ;
https://brainly.com/question/11482745
#SPJ11
A single flat circular loop of wire of radius a and resistance R is immersed in a strong uniform magnetic field. Further, the loop is positioned in a plane perpendicular to the magnetic field at all times. Assume the loop has no current flowing in it initially. Suppose the magnetic field can change, however it always remains uniform and perpendicular to the plane of the loop. Find the total charge that flows past any one point in the loop if the magnetic field changes from B i
to B f
. Hints: (1) use integration, (2) your result should not depend on how the magnetic field changes.
Answers
Hence, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.Answer:Therefore, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.
Consider a single flat circular loop of wire of radius a and resistance R that is immersed in a strong uniform magnetic field. The loop is placed in a plane that is perpendicular to the magnetic field at all times.
Assume that there is no current flowing in the loop initially, however, the magnetic field can change, and it always remains uniform and perpendicular to the plane of the loop.In order to find the total charge that flows past any one point in the loop if the magnetic field changes from Bi to Bf, use the below steps:Step 1: Flux linkage with the loop (Φ) is defined by the equation Φ = BA,
where A is the area of the loop. As the magnetic field changes from Bi to Bf, the flux through the loop will change from Φi = BiA to Φf = BfA.Step 2: From Faraday's law, the emf (ε) induced in the loop is given by ε = -dΦ/dt.Step 3: Using Ohm's law, we have ε = IR, where I is the current in the loop.Step 4: Substituting for ε from step 2 and I from step 3, we get -dΦ/dt = Φ/R or dΦ/Φ = -dt/RStep 5: Integrating from Φi to Φf and from 0 to t, we get ln (Φf/Φi) = -t/R or ln (Φi/Φf) = t/RStep 6: Solving for t,
we get t = -Rln(Φi/Φf)Step 7: The total charge that flows past any one point in the loop is given by Q = It. Substituting for I from step 3 and t from step 6, we get Q = Φi - Φf / R or Q = (Bi - Bf)A/R. Hence, the total charge that flows past any one point in the loop is (Bi - Bf)A/R.Answer:Therefore, the total charge that flows past any one point in the loop is (Bi - Bf)A/.
to know more about charge
https://brainly.com/question/14665331
#SPJ11
The sound from a guitar has a decibel level of 60 dB at your location, while the sound from a piano has a decibel level of 50 dB. What is the ratio of their intensities (guitar intensity / piano intensity)? A. In (6/5) B. 6/5 C. 10:1 D. 100:1 E. 1000:1
Answers
The guitar intensity is 10 times greater than the piano intensity and the ratio of sound intensity of guitar and piano is option C. 10:1
The ratio of guitar's sound intensity to piano's sound intensity can be determined using the following equation:
Ratio of intensities = (10^(dB difference/10))
For this situation, the difference in decibel levels is 60 dB - 50 dB = 10 dB.
Using the equation above, the ratio of intensities can be found
Ratio of intensities = (10^(10/10)) = 10
Therefore, the guitar intensity is 10 times greater than the piano intensity.
Thus option C. 10:1 is the correct answer.
Learn more about sound intensity https://brainly.com/question/14349601
#SPJ11
A dog wishes to swim across a slow-moving stream. The dog can swim at 2.0 m/s in calm water. The current velocity is 3.0 m/s. The distance directly across the stream is 50 m. If the dog points himself directly across the stream, how long will it take to get across the stream? A dog wishes to swim across a slow-moving stream. The dog can swim at 2.0 m/s in calm water. The current velocity is 3.0 m/s. The distance directly across the stream is 50 m. How far downstream will the current have carried the dog when the dog gets to the other side? A dog wishes to swim across a slow-moving stream. The dog can 5wim at 2.0 m/s in calm water. The current velocity is 3.0 m/s. The distance directly across the stream is 50 m. What was the dog's velocity relative to the bank from where the dog started?
Answers
A dog is trying to swim across a slow-moving river. The dog has a travel time of 14.07 seconds and a distance of 42.2 meters downstream.
To solve these questions, we can break down the dog's motion into its horizontal and vertical components.
1) To find how long it will take for the dog to get across the stream, we need to calculate the effective velocity of the dog relative to the bank. This can be found using the Pythagorean theorem:
Velocity across the stream = √(Velocity in calm water)^2 + (Velocity of the current)^2
Velocity across the stream = √(2.0 m/s)^2 + (3.0 m/s)^2
Velocity across the stream = √4.0 m^2/s^2 + 9.0 m^2/s^2
Velocity across the stream = √13.0 m^2/s^2
The distance across the stream is 50 m. We can now calculate the time it takes:
Time = Distance / Velocity across the stream
Time = 50 m / √13.0 m^2/s^2
Time ≈ 14.07 seconds
2) To find how far downstream the current will have carried the dog when it reaches the other side, we can use the formula:
Distance downstream = Time × Velocity of the current
Distance downstream = 14.07 seconds × 3.0 m/s
Distance downstream ≈ 42.2 meters
3) The dog's velocity relative to the bank can be found by subtracting the velocity of the current from the velocity in calm water:
Velocity relative to the bank = Velocity in calm water - Velocity of the current
Velocity relative to the bank = 2.0 m/s - 3.0 m/s
Velocity relative to the bank = -1.0 m/s
The negative sign indicates that the dog is swimming against the current, so its velocity relative to the bank is 1.0 m/s in the opposite direction of the current.
Learn more about vertical components here:
https://brainly.com/question/31684355
#SPJ11
A searchlight installed on a truck requires 60 watts of power when connected to 12 volts. a) What is the current that flows in the searchlight? b) What is its resistance?
Answers
The current flowing in the searchlight is 5 A, and the resistance of the searchlight is 2.4 Ω.
a) To calculate the current that flows in the searchlight, we can use Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R). In this case, the voltage is 12 volts, and we need to find the current.
Using Ohm's Law:
I = V / R
Rearranging the equation to solve for the current:
I = V / R
We are given the voltage V (12 volts), so we can substitute it into the equation:
I = 12 V / R
We are not given the resistance directly, so we need additional information to calculate it.
b) To calculate the resistance, we can use the power equation:
P = V * I
Given that the power (P) is 60 watts and the voltage (V) is 12 volts, we can rearrange the equation to solve for the current (I):
I = P / V
Substituting the given values:
I = 60 W / 12 V
I = 5 A
Now that we have the current, we can use Ohm's Law to find the resistance:
R = V / I
R = 12 V / 5 A
R = 2.4 Ω
To know more about Ohm's Law
https://brainly.com/question/1247379
#SPJ11
What is the magnetic moment of the rotating ring?
Answers
The magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.
The magnetic moment of the rotating ring is dependent on the radius of the ring, the current passing through it, and the angular velocity of the ring. The magnetic moment of a ring that rotates at a constant angular speed in a magnetic field is given by the formula:μ = Iπr²where,μ = magnetic momentI = current flowing through the ringr = radius of the ringBy applying the Lorentz force,
the magnetic moment can be calculated as:μ = IAwhere,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopWhen the ring is rotating, the magnetic moment is given by the formula:μ = IA cos(θ)where,μ = magnetic momentI = current flowing through the ringA = area enclosed by the current loopθ = angle between the magnetic field and the plane of the loopTherefore, the magnetic moment of a rotating ring is dependent on the current flowing through it, the area enclosed by the loop, and the angle between the magnetic field and the plane of the loop.
Learn more about Magnetic moment here,
https://brainly.com/question/27962324
#SPJ11
Object A has a charge of −3μC and a mass of 0. 0025kg. Object B has a charge and a mass of +1μC and 0. 02 kg respectively. What is the magnitude of the electric force between the two objects when they are 0. 30meters away?
(30 points)
Answers
The magnitude of the electric force between two charged objects can be calculated using Coulomb's Law. Coulomb's Law states that the electric force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Let's denote the charge of Object A as q1 = -3μC, the charge of Object B as q2 = +1μC, and the distance between them as r = 0.30 meters.
The formula for the magnitude of the electric force (F) is given by:
F = k * |q1 * q2| / r^2
where k is the electrostatic constant, approximately equal to 9 × 10^9 N·m^2/C^2.
Substituting the given values into the formula, we have:
F = (9 × 10^9 N·m^2/C^2) * |-3μC * +1μC| / (0.30m)^2
Simplifying the expression, we get:
F = (9 × 10^9 N·m^2/C^2) * (3μC * 1μC) / (0.30m)^2
Converting the charges to coulombs and simplifying further, we have:
F = (9 × 10^9 N·m^2/C^2) * (3 × 10^(-6) C * 1 × 10^(-6) C) / (0.30m)^2
Calculating the expression, we find:
F = 9 × 3 × 1 / (0.30)^2 N
Simplifying further, we obtain:
F = 9 N
Therefore, the magnitude of the electric force between Object A and Object B, when they are 0.30 meters away from each other, is 9 Newtons.
Read more about Coulomb law here
brainly.com/question/506926
#SPJ11
I need help I think is b what I’m not sure
Can you explain me ?
Answers
Answer: B
Explanation: We see the color black when no light is being reflected. Black absorbs all of the light unlike white which reflects all of it.
Exercises 2.78 A gas within a piston-cylinder assembly undergoes a thermodynamic cycle consisting of three processes: = 1 bar, Process 1-2: Compression with pV = constant, from pi V₁ = 2 m³ to V₂ = 0.2 m³, U₂ − U₁ = 100 kJ. Process 2-3: Constant volume to P3 = P₁. Process 3-1: Constant-pressure and adiabatic process. There are no significant changes in kinetic or potential energy. Determine the net work of the cycle, in kJ, and the heat transfer for process 2-3, in kJ. Is this a power cycle or a refrigeration cycle? Explain. Wnet = -280.52 kJ; Q23 = 80kJ
Answers
In the given thermodynamic cycle, the network of the cycle is determined to be -280.52 kJ, and the heat transfer for processes 2-3 is 80 kJ. This cycle is a power cycle because it involves a network output.
To calculate the network of the cycle, we need to determine the work for each process and then sum them up.
For Process 1-2, since the compression occurs with pV = constant, the work done can be calculated using the equation W = p(V₂ - V₁). Substituting the given values, we find W₁₂ = -100 kJ.
For Process 2-3, as it is a constant volume process, no work is done (W₂₃ = 0).
For Process 3-1, as it is a constant-pressure and adiabatic process, no heat transfer occurs (Q₃₁ = 0).
The network of the cycle is the sum of the work for each process, so W_net = W₁₂ + W₂₃ + W₃₁ = -100 kJ + 0 + 0 = -100 kJ.
The heat transfer for processes 2-3 is given as Q₂₃ = 80 kJ.
Since the network output (W_net) is negative, indicating work done by the system, and heat is transferred into the system in processes 2-3, this cycle is a power cycle. In a power cycle, work is done by the system, and heat is transferred into the system to produce a network output.
To know more about the thermodynamic cycle click here:
https://brainly.com/question/30630564
#SPJ11
If mass A and B are both 2.5 kg, mass A is 1.0 m to the left of the fulcrum, mass B is 0.5 m to the right of the fulcrum, and the bar weighs 0.0 kg, what is the initial torque on the bar?
Answers
The period of a sound wave is 1.00 ms. Calculate the frequency of the wave. f = Hz TOOLS x10 Calculate the angular frequency of the wave. rad/s
Answers
By substituting the frequency in the formula, we get the angular frequency of the wave as 2 × 3.14 × 1000 rad/s, which is approximately 6280 rad/s. Therefore, the angular frequency of the sound wave is approximately 6280 rad/s.
Given,Period, T = 1.00 ms = 1.00 × 10⁻³ sLet's calculate the frequency of the wave using the relation,frequency, f = 1 / TWhere f = frequencyWe can substitute the given values and get,f = 1 / T= 1 / (1.00 × 10⁻³ s)= 1000 HzWe get the frequency of the wave as 1000 Hz. The angular frequency of the wave is given by the relation,Angular frequency, ω = 2πfWhere ω = Angular frequencyWe can substitute the given values and get,ω = 2πf= 2 × 3.14 × 1000 rad/s≈ 6280 rad/s
Therefore, the angular frequency of the wave is approximately 6280 rad/s.Both the solutions are summarized below in 150 words:For a given sound wave with a period of 1.00 ms, we can calculate the frequency of the wave using the formula, frequency = 1 / T. By substituting the values of the period in the formula, we get the frequency of the wave as 1000 Hz. Therefore, the frequency of the sound wave is 1000 Hz.The angular frequency of the sound wave can be calculated using the formula, ω = 2πf.
By substituting the frequency in the formula, we get the angular frequency of the wave as 2 × 3.14 × 1000 rad/s, which is approximately 6280 rad/s. Therefore, the angular frequency of the sound wave is approximately 6280 rad/s.
Learn more about Sound wave here,
https://brainly.com/question/16093793
#SPJ11
A sinusoidal transverse wave travels along a long, stretched string. The amplitude of this wave is 0.0911 m, its frequency is 2.73 Hz, and its wavelength is 1.13 m. What is the shortest transverse distance d between a maximum and a minimum of the wave? d = ______m How much time At is required for 63.9 cycles of the wave to pass a stationary observer? Δt = ______ s Viewing the whole wave at any instant, how many cycles N are there in a 38.3 m length of string? N = _____ cycles
Answers
Answer: The shortest transverse distance d between maximum and minimum is one-half of the wavelength.= 0.565 m.
Time At required for 63.9 cycles to pass a stationary observer = 23.44 s. Total cycles in 38.3 m string length = 43.2 cycles.
Let's solve it step by step.
Shortest transverse distance d between maximum and minimum: Maximum and minimum are the points on the string where the string displacement is maximum in opposite directions. Hence, the shortest transverse distance d between maximum and minimum is one-half of the wavelength. d = λ/2 = 1.13/2 = 0.565 m.
Time At required for 63.9 cycles to pass a stationary observer:
At = 1/frequency
= 1/2.73 = 0.3668 s.
Total time for 63.9 cycles to pass = 0.3668 x 63.9 = 23.44 s.
Cycles N in a 38.3 m length of string: Wave velocity = frequency × wavelength
v = fλv = 2.73 × 1.13v = 3.0851 m/s.
Total number of cycles in 1 meter length = frequency.
N = v/f N = 3.0851/2.73N = 1.1287 cycles/m.
Total cycles in 38.3 m string length = 1.1287 × 38.3 = 43.2078 cycles.
N = 43.2 cycles.
Hence, the three required values are as follows: Shortest transverse distance d between maximum and minimum = 0.565 m.
Time At required for 63.9 cycles to pass a stationary observer = 23.44 s. Total cycles in 38.3 m string length = 43.2 cycles.
Learn more about wavelength: https://brainly.com/question/10750459
#SPJ11
- Angular Momentum
\[
\begin{array}{l}
L_{\text {sun }}=0.1 M_{\text {sun }} R^{2} \text { sun } \Omega=3 \times 10^{48} \mat
I don't understand how this is calculated.
The question was "In an isolated system, the total angular momentum is conserved. Calculate the angular momentum of the Earth and compare it with the angular momentum of the sun."
a) Please help me calculate angular momentum of the Earth based on the calculation on the image above
b) Compare it with the angular momentum of the sun
Answers
The angular momentum of the Earth is approximately 2.66 × 10^40 kg·m²/s, and the angular momentum of the Sun is approximately 1.90 × 10^47 kg·m²/s.
Angular momentum is a property of rotating objects and is given by the equation L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity. The moment of inertia of a planet can be calculated using the formula I = 2/5 * m * r², where m is the mass of the planet and r is its radius.
To calculate the angular momentum of the Earth, we need to determine its moment of inertia and angular velocity. The mass of the Earth is approximately 5.97 × 10^24 kg, and its radius is approximately 6.37 × 10^6 m. The angular velocity of the Earth can be approximated as the rotational speed of one revolution per day, which is approximately 7.27 × 10^(-5) rad/s. Plugging these values into the formula, we find that the angular momentum of the Earth is approximately 2.66 × 10^40 kg·m²/s.
In comparison, the angular momentum of the Sun can be calculated in a similar manner. The mass of the Sun is approximately 1.99 × 10^30 kg, and its radius is approximately 6.96 × 10^8 m. Using the same formula and considering the Sun's angular velocity, we find that the angular momentum of the Sun is approximately 1.90 × 10^47 kg·m²/s.
Learn more about angular momentum here:
https://brainly.com/question/30656024
#SPJ11
corresponding quantities of heat absorbed and discharged? 23. In performing 100.0 J of work, an engine discharges 50.0 J of heat. What is the efficiency of the engine?
Answers
The efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
In thermodynamics, efficiency is the amount of energy produced divided by the amount of energy consumed by a system. It can be defined as the ratio of output work to input energy. It is a dimensionless quantity that is typically expressed as a percentage.
In the given problem, the efficiency of an engine is to be calculated. The work done by the engine is 100.0 J, and the heat discharged is 50.0 J.
Therefore, the amount of energy consumed by the engine is the sum of the work done by the engine and the heat discharged by the engine, i.e., 100.0 J + 50.0 J = 150.0 J.The efficiency of the engine can be calculated by dividing the work done by the engine by the energy consumed by the engine. Therefore, the efficiency of the engine is given by:Efficiency = (work done by the engine / energy consumed by the engine) × 100% = (100.0 J / 150.0 J) × 100% = 66.67%.
Therefore, the efficiency of the engine is 66.67%.Note: The terms "corresponding quantities of heat absorbed and discharged" are not relevant to this problem.
to know more about engine
https://brainly.com/question/25257437
#SPJ11
b) Given three 2-inputs AND gates, draw how you would produce a 4-inputs AND gate. (3 marks)
Answers
To create a 4-input AND gate using three 2-input AND gates, you can use the following configuration: (The picture is given below)
In this configuration, the inputs A1 and B1 are connected to the first 2-input AND gate, inputs A2 and B2 are connected to the second 2-input AND gate, and inputs A3 and B3 are connected to the third 2-input AND gate. The outputs Y1 and Y2 from the first two AND gates are then connected to the inputs of the third AND gate.
The outputs Y1, Y2, and Y of the three AND gates are connected together, resulting in a 4-input AND gate with inputs A1, B1, A2, B2, A3, B3, A4, and B4, and output Y.
By appropriately connecting the inputs and outputs of the three 2-input AND gates, we can achieve the desired functionality of a 4-input AND gate.
To know more about AND gate
https://brainly.com/question/31152943
#SPJ11
The force of attraction that a 37.5 μC point charge exerts on a 115 μC point charge has magnitude 3.05 N. How far apart are these two charges?
Answers
The force of attraction that a 37.5 μC point charge exerts on a 115 μC point charge has magnitude 3.05 NThe two charges, 37.5 μC and 115 μC, are attracted to each other with a force of magnitude 3.05 N.
Coulomb's law states that the force of attraction or repulsion between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as:
F = k * (|q1| * |q2|) / r^2
where F is the force of attraction or repulsion, k is the electrostatic constant (k = 8.99 × 10^9 N m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.
In this case, we have a force of 3.05 N, a charge of 37.5 μC (3.75 × 10^-5 C), and a charge of 115 μC (1.15 × 10^-4 C). We need to find the distance (r) between the charges.
Using Coulomb's law, we can rearrange the formula to solve for the distance:
r = √(k * (|q1| * |q2|) / F)
Substituting the given values:
r = √((8.99 × 10^9 N m^2/C^2) * ((3.75 × 10^-5 C) * (1.15 × 10^-4 C)) / (3.05 N))
Simplifying the expression:
r = √(39.18 m^2)
r ≈ 6.26 m
Therefore, the two charges are approximately 6.26 meters apart.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
The angular position of a point on the aim of a rotating wheel is given by θ = 2.3t + 4.72t² + 1.6t ³, where θ is in radians ift is given in seconds. What is the angular speed at t = 3.0 s? ________
What is the angular speed at t = 5.0 s? ________ What is the average angular acceleration for the time interval that begins at t = 3,0 s and ends at t = 5.0 s? ________
What is the instantaneous acceleration at t = 5.0 s?
________
Answers
The angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².
The equation θ = 2.3t + 4.72t² + 1.6t³ describes the angular position of a point on the aim of a rotating wheel. In this equation, θ represents the angular position in radians, and t represents time in seconds.
Angular speed:
The angular speed is the rate of change of angular displacement. It can be calculated by differentiating the angular position equation with respect to time:
ω = dθ/dt = 2.3 + 9.44t + 4.8t²
Angular speed at t = 3.0 s:
Substituting t = 3.0 s into the angular speed equation:
ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(3.0) + 4.8(3.0)² = 73.82 rad/s
Angular speed at t = 5.0 s:
Substituting t = 5.0 s into the angular speed equation:
ω = 2.3 + 9.44t + 4.8t² = 2.3 + 9.44(5.0) + 4.8(5.0)² = 169.5 rad/s
Average angular acceleration:
The average angular acceleration is the change in angular speed per unit time.
α = (ω₂ - ω₁) / (t₂ - t₁)
During the time interval starting at t = 3.0 s and ending at t = 5.0 s,
t₁ = 3.0 s
t₂ = 5.0 s
ω₁ = 73.82 rad/s
ω₂ = 169.5 rad/s
Substituting these values into the average angular acceleration equation:
α = (ω₂ - ω₁) / (t₂ - t₁) = (169.5 - 73.82) / (5.0 - 3.0) = 47.84 rad/s²
Instantaneous angular acceleration:
The instantaneous angular acceleration is the rate of change of angular speed with respect to time. It can be calculated by differentiating the angular speed equation with respect to time:
α = dω/dt = d/dt (2.3 + 9.44t + 4.8t²) = 9.44 + 9.6t
Substituting t = 5.0 s into the instantaneous angular acceleration equation:
α = 9.44 + 9.6t = 9.44 + 9.6(5.0) = 57.44 rad/s²
Therefore, the angular speed at t = 3.0 s is 73.82 rad/s, the angular speed at t = 5.0 s is 169.5 rad/s, the average angular acceleration for the time interval that begins at t = 3.0 s and ends at t = 5.0 s is 47.84 rad/s², and the instantaneous angular acceleration at t = 5.0 s is 57.44 rad/s².
Learn more about angular speed at: https://brainly.com/question/25279049
#SPJ11
An object moves with a speed of 4.4 m/s in a circle of radius 2.6 m. Its centripetal acceleration is 0.66 m/s² 1.7 m/s² 7.4 m/s² 1.3 m/s² 9.2 m/s² If centripetal force is directed toward the centre, why do you feel that you are 'thrown' away from the centre as a car goes around a curve? Explain.
Answers
Therefore, the passengers feel as if they are being thrown away from the centre of the curve, even though there is no actual force acting on them in that direction.
Centripetal acceleration is defined as the acceleration experienced by an object in circular motion and is directed towards the centre of the circle. The formula for centripetal acceleration is a = v²/r, where v is the velocity of the object and r is the radius of the circle.Here, the object moves with a speed of 4.4 m/s in a circle of radius 2.6 m. Therefore, the centripetal acceleration is given bya = v²/r = (4.4)²/2.6 = 7.4 m/s²Hence, the centripetal acceleration of the object is 7.4 m/s².Now, as the centripetal force is directed towards the centre, why do you feel that you are 'thrown' away from the centre as a car goes around a curve?The reason behind this phenomenon is inertia. Inertia is defined as the tendency of an object to resist any change in its state of motion. When a car goes around a curve, it changes its direction of motion and the passengers inside the car experience a force towards the outside of the curve, which is known as the centrifugal force.The centrifugal force is the outward force that opposes the centripetal force and is proportional to the square of the speed and the radius of the circle. This force is responsible for throwing the passengers away from the centre of the curve.The centrifugal force is not a real force, but rather a fictitious force that arises due to the frame of reference used to observe the motion of the object. Therefore, the passengers feel as if they are being thrown away from the centre of the curve, even though there is no actual force acting on them in that direction.
To know more about centripetal acceleration visit:
https://brainly.com/question/10710931
#SPJ11
A Carousel (2000kg) spins at 2.5 revolutions-per-min. To stop it, brakes apply friction of 100N on the outermost edge of the carousel. Radius is 5m. Heigh is 1m. How long does it take for the carousel to stop? How much work is done by friction on the carousel to stop it?
Answers
Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.
Given Data:The mass of the carousel (m) = 2000 kgRevolution per minute (rpm) = 2.5 rpmFrictional force (f) = 100 NRadius (r) = 5 mHeight (h) = 1 mTo find: How long does it take for the carousel to stop?How much work is done by friction on the carousel to stop it?Solution:Formula used:Centripetal force (f) = mv²/r ……………..(i)Where,m = mass of the objectv = velocityr = radius of the object.
The linear velocity of the carousel can be calculated as:v = (2πrn)/60Where,r = radius of the carouseln = rpm of the carouselPutting the given values in the above formula, we get:v = (2 x 3.14 x 5 x 2.5)/60v = 2.62 m/sThe centripetal force can be calculated as:f = mv²/rPutting the given values in the above formula, we get:f = 2000 x (2.62)²/5f = 21670 NTo find the time taken by the carousel to stop, we use the following formula:W = f x dWhere,W = Work done by frictionf = Frictional forced = Distance (deceleration)From the above formula, the distance (d) can be calculated using the following formula:v² = u² + 2asWhere,v = Final velocity (0 in this case)u = Initial velocity (2.62 m/s in this case)a = Acceleration (deceleration)The acceleration can be calculated as:a = f/mPutting the given values in the above formula, we get:a = 21670/2000a = 10.835 m/s².
Now, using the above calculated values, we get:v² = u² + 2asd = (v² - u²)/2ad = (0 - (2.62)²)/(2 x 10.835)d = 0.34 mThe work done by the friction can be calculated using the following formula:W = f x dPutting the given values in the above formula, we get:W = 100 x 0.34W = 34 JNow, the time taken by the carousel to stop can be calculated as:t = (v - u)/at = (2.62 - 0)/10.835t = 0.24 sTherefore, the time taken by the carousel to stop is 0.24 s.The work done by friction on the carousel to stop it is 34 J.Answer:Time taken by the carousel to stop = 0.24 sWork done by friction on the carousel to stop it = 34 J.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field. How close are the two charges?
Answers
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field.
Let the positive charge be q1=+1.100 μC and the negative charge be q2=-0.500 μC.
A positive charge of 1.100μ C is located in a uniform field of 9.00×10⁴ N/C. A negative charge of -0.500μ C is brought near enough to the positive charge that the attractive force between the charges just equals the force on the positive charge due to the field.
The net force on q1 due to the field is:
1=q1×E=+1.100×10⁻⁶C×9.00×10⁴ N/C=+99 N
The force between the charges is attractive and its magnitude is equal to the force experienced by q1 due to the uniform electric field:
2=99N
Then the distance between the charges is:
r=12/402= (1.100×10⁻⁶C)(-0.500×10⁻⁶C)/(4(8.85×10⁻¹²C²/N·m²)(99N))= 1.87×10⁻⁵m
Answer: 1.87×10⁻⁵m.
Learn more about electric field: https://brainly.com/question/19878202
#SPJ11
A proton accelerates from rest in a uniform electric field of 610 NC At one later moment, its speed is 1.60 Mnys (nonrelativistic because is much less than the speed of light) (a) Find the acceleration of the proton
(b) Over what time interval does the proton reach this speed ?
(c) How far does it move in this time interval?
(d) What is its kinetic energy at the end of this interval?
Answers
Answer: a. The acceleration of the proton is 5.85 × 10^14 m/s2.
b. The time interval to reach the speed of 1.60 × 10^6 m/s= 2.74 × 10^-9 s.
c. The proton moves a distance of 1.38 × 10^-5 m.
d. kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Electric field = 610 N/c,
Initial velocity, u = 0 m/s,
Final velocity, v = 1.6 × 106 m/s
(a) Acceleration of the proton: The force acting on the proton = qE where q is the charge of the proton.
Therefore, ma = qE where m is the mass of the proton.
The acceleration of the proton, a = qE/m.
Here, the charge of the proton, q = +1.6 × 10^-19 C, The mass of the proton, m = 1.67 × 10^-27 kg. Substituting the values in the equation, we get, a = 1.6 × 10^-19 C × 610 N/C ÷ 1.67 × 10^-27 kg. a = 5.85 × 10^14 m/s^2
(b) Time taken to reach this speed: We know that, v = u + at. Here, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 1014 m/s2. Substituting the values, we get,1.6 × 106 = 0 + 5.85 × 10^14 × tt = 1.6 × 106 ÷ 5.85 × 10^14 s= 2.74 × 10^-9 s
(c) Distance travelled by the proton: The distance travelled by the proton can be calculated using the equation,v^2 = u^2 + 2asHere, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 10^14 m/s2Substituting the values, we get,1.6 × 10^6 = 0 + 2 × 5.85 × 10^14 × s. Solving for s, we get, s = 1.38 × 10^-5 m.
(d) Kinetic energy of the proton: At the end of the interval, the kinetic energy of the proton, KE = (1/2)mv^2 Here, m = 1.67 × 10^-27 kg, v = 1.6 × 10^6 m/s. Substituting the values, we get, KE = (1/2) × 1.67 × 10^-27 × (1.6 × 10^6)^2JKE = 2.56 × 10^-12 J.
Therefore, the acceleration of the proton is 5.85 × 10^14 m/s2.
The time interval to reach the speed of 1.60 × 10^6 m/s is 2.74 × 10^-9 s.
The proton moves a distance of 1.38 × 10^-5 m.
kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Learn more about proton : https://brainly.com/question/1481324
#SPJ11
Two lenses are placed along the x axis, with a diverging lens of focal length -8.10 cm on the left and a converging lens of focal length 17.0 cm on the right. When an object is placed 12.0 cm to the left of the diverging lens, what should the separation s of the two lenses be if the final image is to be focused at x = [infinity]? cm
Answers
Answer: The separation s of the two lenses should be 40.125 cm if the final image is to be focused at x = ∞ cm.
Here, we can use :1/f = 1/v - 1/u where,1/f = focal length of the lens, 1/v = image distance, and 1/u = object distance.
For the diverging lens:1/f1 = -1/u1 - 1/v1
For the converging lens:1/f2 = 1/u2 - 1/v2 where,u1 = -12.0 cm (object distance from the diverging lens),v1 = distance of the image formed by the diverging lens, s = distance between the two lenses (converging and diverging lens),u2 = distance of the object from the converging lens,v2 = distance of the image formed by the converging lens (which is the final image),f1 = -8.10 cm (focal length of the diverging lens), andf2 = 17.0 cm (focal length of the converging lens).
To calculate the distance s between the two lenses, we need to calculate the image distance v1 formed by the diverging lens and the object distance u2 for the converging lens. Here, the image formed by the diverging lens acts as an object for the converging lens.
So, v1 = distance of the image formed by the diverging lens = u2 = - (s + 8.10) cm (as the image is formed on the left of the converging lens).
Now, using the formula for both lenses, we can write:1/-8.10 = -1/-12.0 - 1/v1 => v1 = -28.125 cm (approx)and,1/17.0 = 1/u2 - 1/v2 => v2 = 28.125 cm (approx)
Lens formula for the converging lens, we have: 1/17.0 = 1/u2 - 1/∞ = 1/u2 = 1/17.0 => u2 = 17.0 cm
Now, we can use the distance relation between the two lenses to calculate the distance s between them.
Similarly, we can write the distance equation for the object distance of the diverging lens as:-12.0 + s = -v1 = 28.125 cmSo, we have:s = 40.125 cm (approx)
Therefore, the separation s of the two lenses should be 40.125 cm if the final image is to be focused at x = ∞ cm.
Learm more about diverging and converging lens: https://brainly.com/question/1280311
#SPJ11