Based on the electronegativities of 2.1 for H and 2.5 for I, we can predict that HI (hydrogen iodide) would be expected to be a polar covalent molecule, with the iodine atom having a partial negative charge (δ-) and the hydrogen atom having a partial positive charge (δ+).
This is because electronegativity is the measure of an atom's ability to attract shared electrons in covalent bond. In the HI molecule, the iodine atom has a higher electronegativity than the hydrogen atom, which means it has a greater ability to attract the shared electrons in the covalent bond toward itself.
As a result, the electrons in the HI molecule will be more strongly attracted to the iodine atom, causing the iodine atom to have a partial negative charge and the hydrogen atom to have a partial positive charge.
To know more about electronegativities here
https://brainly.com/question/14031645
#SPJ4
how does the change in mass of the anode compare with the change in mass of the cathode? what happens to the concentration of
The change in mass of the anode and cathode in an electrochemical cell can be used to determine the amount of reactants that have been converted into products during the electrochemical reaction. Therefore, the concentration of the electrolyte solution may change during the course of the electrochemical reaction.
The amount of reactants consumed at the anode will be equal to the amount of products produced at the cathode. Therefore, the change in mass of the anode should be equal in magnitude but opposite in sign to the change in mass of the cathode.
For example, in a galvanic cell where zinc is oxidized at the anode and copper is reduced at the cathode, the mass of the anode will decrease as zinc atoms are converted to Zn²⁺ ions and electrons, while the mass of the cathode will increase as copper ions are reduced to copper atoms and gain electrons.
The amount of zinc consumed at the anode should be equal to the amount of copper produced at the cathode, and so the change in mass of the anode should be equal in magnitude but opposite in sign to the change in mass of the cathode.
To know more about cathode here
https://brainly.com/question/11920555
#SPJ4
--The given question is incorrect, the correct question is
"How does the change in mass of the anode compare with the change in mass of the cathode? what happens to the concentration."--
what do you need to prove in the inductive step? (you must provide an answer before moving to the next part.)
In the inductive step of a proof, you need to prove the statement that If P(k) is true and then P(k+1) is true.
In the induction process, a charged object is brought near but not touched to a neutral conducting object. The presence of a charged object near a neutral conductor will force (or induce) electrons within the conductor to move.
The method can be extended to prove statements about more general well-founded structures, such as trees; this generalization, known as structural induction, is used in mathematical logic and computer science. Mathematical induction in this extended sense is closely related to recursion. Mathematical induction is an inference rule used in formal proofs, and is the foundation of most correctness proofs for computer programs.
Visit here to learn more about the induction: https://brainly.com/question/18575018
#SPJ4
Aluminum sulphate solution and calcium hydroxide solution produce a precipitate of aluminum hydroxide and solid calcium sulphate.
Answer:
Explanation:
Yes, that is correct.
When aluminum sulfate solution (Al2(SO4)3) and calcium hydroxide solution (Ca(OH)2) are mixed, a double displacement reaction occurs, resulting in the formation of solid aluminum hydroxide (Al(OH)3) and solid calcium sulfate (CaSO4). The balanced chemical equation for this reaction is:
Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4
The aluminum hydroxide precipitates out of the solution as a gelatinous solid, while the calcium sulfate forms a white solid. This reaction is commonly used in water treatment plants to remove impurities from drinking water, as the aluminum hydroxide acts as a coagulant that binds to particles and organic matter in the water, allowing them to be removed more easily.
which of the following statements is false? substances with similar intermolecular attractive forces tend to be soluble in one another. the weaker the attraction between the solute and solvent molecules, the greater the solubility. the solubility of a gas increases in direct proportion to its partial pressure above the solution. nonpolar liquids tend to be insoluble in polar liquids.
The solubility of a gas in a liquid is dependent on the partial pressure of the gas above the liquid, as stated in the third statement. However, the second statement is false because the solubility of a solute in a solvent typically increases as the strength of the attractive forces between the solute and solvent molecules increases, not decreases.
The statement "the weaker the attraction between the solute and solvent molecules, the greater the solubility" is false.
Solubility is a measure of how much of a solute can dissolve in a given amount of solvent at a certain temperature and pressure. The solubility of a solute depends on various factors such as the nature of the solute and solvent, temperature, pressure, and the intermolecular forces between them.
Generally, substances with similar intermolecular attractive forces tend to be soluble in one another, as stated in the first statement. Nonpolar liquids tend to be insoluble in polar liquids, as stated in the fourth statement.
Find out more about the solubility of a gas
brainly.com/question/14781271
#SPJ4
which of the amines shown could, in principle, be used as a resolving agent for a racemic carboxylic acid?
(S)-2-aminobutane could be used as a resolving agent for a racemic carboxylic acid.
To be used as a resolving agent, an amine must be able to form a diastereomeric salt with the racemic carboxylic acid. This salt can then be separated into its enantiomeric forms using conventional separation techniques. The key is to find an amine that will selectively react with one enantiomer of the carboxylic acid and not the other.
Out of the amines shown, only (S)-2-aminobutane has a chiral center and is therefore capable of forming diastereomeric salts with a racemic carboxylic acid. The other amines are achiral and would not be able to differentiate between the enantiomers of the carboxylic acid.
When an amine is used as a resolving agent for a racemic carboxylic acid, it reacts with the acid to form a diastereomeric salt. This salt can be separated into its enantiomeric forms using conventional separation techniques such as recrystallization or chromatography. The key is to find an amine that will selectively react with one enantiomer of the carboxylic acid and not the other.
learn more about amines here:
https://brainly.com/question/28167507
#SPJ4
Which of the following molecules contain a covalent bond?
A,CaO B,HCI C,CO2 D,SO2 E,Na2O F,PCL3 G,MgO H,NaH I,CH2
Answer:
B, C, D, F, I
Explanation:
A covalent bond is a chemical bond between two nonmetals (their electronegativity difference must be greater than 1.5-1.6)
.
A. Ca is a metal and O is nonmetal, so the bond in CaO is ionic
B. Both H and Cl are nonmetals, so the bond in HCl is covalent
C. Both C and O are nonmetals, so the bond in CO2 is covalent
D. Both S and O are nonmetals, so the bond in SO2 is covalent
E. Na is a metal and O is nonmetal, so the bond in Na2O is ionic
F. Both P and Cl are nonmetals, so the bond in PCl3 is covalent
G. Mg is a metal and O is nonmetal, so the bond in MgO is ionic
H. Na is a metal and H is nonmetal, so the bond in NaH is ionic
I. Both C and H are nonmetals, so the bond in CH2 is covalent
which of the following is true regarding asteroids?
A.exist mainly in the oort cloud
B.caused by eruptions of heated gas from the sun
C. are made of solid ic D. thought to be left over pieces of the solar system
Asteroids are real objects that are thought to be remnants of the solar system. Little, stony objects known as asteroids go around the Sun. Option D is correct.
Regarding asteroids, which of the following statements is accurate?Little, stony objects known as asteroids go around the Sun. They resemble planets but are smaller and frequently formed erratically. A variety of rocks make up the majority of them, although some also contain clay or metal.
Which of the following accurately sums up an asteroid?Asteroids are rocky, airless leftovers from the early stages of the solar system's formation, which occurred around 4.6 billion years ago. They are also known as minor planets.
To know more about asteroids visit:-
https://brainly.com/question/27871303
#SPJ1
what is saltation? group of answer choices the skipping or bouncing motion of particles transported by running water the amount of dissolved materials carried by a stream the amount of suspended particles carried by a stream the very fine materials carried in the turbulent flow of the stream
Saltation is the skipping or bouncing motion of particles transported by running water. Saltation is a type of bedload transport in which small and medium-sized particles are lifted and moved downstream by the flow of water.
The particles that are involved in saltation are too large to be carried in suspension by the water, but too small to roll or slide along the streambed.
The term saltation comes from the Latin word "saltare," which means "to leap or dance." It is used to describe the movement of sediment particles that bounce and leap along the streambed. Saltation occurs when the velocity of the water is strong enough to lift particles from the streambed, but not strong enough to carry them in suspension.
In saltation, particles that are lifted from the streambed by the flow of water fall back to the bed after they lose momentum. This falling back to the bed causes the particles to bounce and leap along the bed in a zig-zag motion. Saltation can move sediment over a short distance, but it is an important process in stream erosion and sediment transport.
For more such questions on Saltation
brainly.com/question/14038711
#SPJ11
a solid is decomposed in hcl, producing a gas. the product gas took 1.63 times as long to effuse as the same amount of co2 under the same conditions of temperature and pressure. what is the molar mass of the product gas? answer in units of g/mol.
According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. That is:
rate of effusion ∝ 1/√M
where M is the molar mass of the gas.
Let's assume that the molar mass of CO2 is M1 and the molar mass of the product gas is M2. We can express the ratio of their effusion rates as:
M2/M1 = (rate of effusion of CO2) / (rate of effusion of the product gas)
M2/M1 = (1/1.63)^2 (since the product gas took 1.63 times as long to effuse as CO2)
M2/M1 = 0.376
We know that the molar mass of CO2 is 44 g/mol. Therefore, we can solve for the molar mass of the product gas:
M2 = M1 x 0.376
M2 = 44 g/mol x 0.376
M2 = 16.544 g/mol
So the molar mass of the product gas is approximately 16.5 g/mol.
To know more about gas click here
brainly.com/question/14812509
#SPJ4
If Liquid diethyl ether (AHvap = 26.5 kJ/mol) is poured into a beaker on a humid day, the ether will evaporate, and frost will form on the beaker. Construct an explanation for the process.
In comparison to the greater hydrogen bonding in ethanol, diethyl ether molecules are bound together by weak dispersion forces. As a result, one mole of diethyl ether takes less heat to vapourize than one mole of ethanol.
Is diethyl ether a more volatile substance than water?The vapour pressure of diethyl ether at these temperatures is more than 20 times that of water, indicating its volatility.
Diethyl Ether, CH3CH2OCH2CH3, is a highly flammable organic solvent that was also revealed to be one of the earliest anaesthetics. Because it boils at 34.6°C, just below the typical human body temperature, ether evaporates quickly. Since its vapour is denser than air, ether fumes tend to sink into the atmosphere.
learn more about diethyl ether
https://brainly.com/question/14690225
#SPJ1
How do I solve this?
From the calculation, it is clear that the mass of the S8 that has been produced here is about 136 g.
What is the mole?The mole is commonly used in chemistry for stoichiometric calculations, such as determining the amount of reactants needed in a chemical reaction to produce a desired amount of product.
We know that;
Number of moles of SO2 = 91g/64g/mol
=1.42 moles
Now if 8 moles of SO2 produces 3 moles of S8
1.42 moles of SO2 will produce 1.42 * 3/8
= 0.53 moles
Mass of the S8 = 0.53 * 256 g/mol
= 136 g
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
What volume of 02 is consumed when 458g of CH4 are combusted at STP
according to the following equation? CH4 + 202 -> CO2 + 2H2O
The volume of oxygen consumed when 458 g of CH4 is combusted at STP is 1278.14 L.
What is STP?
STP stands for Standard Temperature and Pressure, which is a standard set of conditions used in chemistry and physics experiments. The standard temperature is 0 degrees Celsius or 273.15 Kelvin, while the standard pressure is 1 atmosphere or 101.3 kilopascals (kPa). At STP, one mole of any ideal gas occupies a volume of 22.4 liters (L). These standard conditions allow scientists to compare the properties of different gases under the same conditions, making it easier to make accurate measurements and predictions.
To find the volume of oxygen consumed during the combustion of methane, we need to use the balanced chemical equation and the ideal gas law.
First, let's find the number of moles of methane used:
Molar mass of CH4 = 12.01 + 4(1.01) = 16.05 g/mol
Number of moles of CH4 = 458 g / 16.05 g/mol = 28.53 mol
According to the balanced chemical equation, one mole of CH4 reacts with two moles of O2, so we need:
28.53 mol CH4 × 2 mol O2/1 mol CH4 = 57.06 mol O2
At STP (standard temperature and pressure), one mole of any ideal gas occupies 22.4 L of volume. Therefore, the volume of oxygen consumed is:
57.06 mol O2 × 22.4 L/mol = 1278.14 L
Learn more about STP from the given link
https://brainly.com/question/2783971
#SPJ1
write the condensed structural formula of the organic product for propanoic acid reacting with each of the following: naoh, methanol, water.
The chemical equation for the reaction is as follows:CH3CH2COOH + H2O → CH3CH2COOH + H3O+
When answering a question on Brainly, as a question answering bot, it is important to always be factually accurate, professional, and friendly. Additionally, it is essential to be concise and not provide extraneous amounts of detail.
Any typos or irrelevant parts of the question should be ignored. Below is the condensed structural formula of the organic product for propanoic acid reacting with each of the following:
NaOHSodium hydroxide (NaOH) reacts with propanoic acid (CH3CH2COOH) to give sodium propanoate (CH3CH2COO-Na+). The chemical equation for the reaction is as follows:
CH3CH2COOH + NaOH → CH3CH2COO-Na+ + H2OMethanolWhen propanoic acid reacts with methanol (CH3OH) in the presence of a catalyst, such as sulfuric acid (H2SO4), methyl propanoate (CH3CH2COOCH3) is formed.
The chemical equation for the reaction is as follows:CH3CH2COOH + CH3OH → CH3CH2COOCH3 + H2OWaterWhen propanoic acid reacts with water (H2O), it undergoes hydrolysis to give propanoic acid and hydronium ions (H3O+).
To learn more about : chemical
https://brainly.com/question/29886197
#SPJ11
a chemist dissolves of pure perchloric acid in enough water to make up of solution. calculate the ph of the solution. be sure your answer has the correct number of significant digits.
The pH of the solution is 2.46. It is important to note that the answer should have the correct number of significant digits, which in this case is three.
To calculate the pH of the solution, we need to first determine the concentration of the solution.
Concentration (M) = moles of solute (n) / volume of solution (V)Concentration of solution = 0.2500 mol / 2.500 L
= 0.100 M
Now that we have the concentration, we can calculate the pH of the solution by using the pH formula:
pH = -log [H+]
The concentration of H+ in the solution can be calculated using the ionization constant of perchloric acid.
Ka = [H+][ClO4-]/[HClO4]1.2 x 10^-2
= [H+]^2/[0.100 M]
Therefore, [H+] = 0.00347 M
Now we can substitute this value into the pH formula:
pH = -log (0.00347)
= 2.46
To learn more about: pH
https://brainly.com/question/12609985
#SPJ11
iron is obtained commercially by reacting hematite (fe2o3) with carbon monoxide. fe2o3 (s) 3 co(g) 2 fe(s) 3 co2(g) how many grams of iron are produced if 27.0 moles of hematite react with 86.0 moles of carbon monoxide? question blank 1 of 3
3020 grams of iron are produced when 27.0 moles of hematite react with 86.0 moles of carbon monoxide.
Balanced chemical equation for the reaction between hematite and carbon monoxide will be; Fe₂O₃(s) + 3CO(g) -> 2Fe(s) + 3CO₂(g)
From the balanced equation, we can see that 1 mole of Fe₂O₃ reacts with 3 moles of CO to produce 2 moles of Fe. So, to determine the amount of iron produced, we first need to determine which reactant is limiting.
We can calculate the moles of Fe₂O₃ and CO;
Moles of Fe₂O₃ = 27.0 moles
Moles of CO = 86.0 moles
To determine the limiting reactant, we need to compare the mole ratio of Fe₂O₃ to CO required by the balanced equation (1:3) to the actual mole ratio of Fe₂O₃ to CO provided.
Mole ratio of Fe₂O₃ to CO = 27.0/1 : 86.0/3 = 81 : 86 ≈ 0.94 : 1
Since the actual mole ratio of Fe₂O₃ to CO is less than the mole ratio required by the balanced equation, Fe₂O₃ is the limiting reactant.
The amount of Fe produced can be calculated using the mole ratio of Fe₂O₃ to Fe in the balanced equation.
Moles of Fe = 2/1 × moles of Fe₂O₃ = 2/1 × 27.0 moles = 54.0 moles
Finally, we can convert moles of Fe to grams of Fe using the molar mass of Fe
Grams of Fe = moles of Fe × molar mass of Fe = 54.0 moles × 55.85 g/mol = 3020 g
To know more about limiting reactant here
https://brainly.com/question/2948214
#SPJ4
which element plays the same role on titan as water does on earth (existing as gas, liquid, and solid)?
Methane (CH₄) plays the same role on Titan as water does on Earth, existing as gas, liquid, and solid.
On Earth, water exists as a gas (water vapor), liquid (water), and solid (ice) due to the planet's temperature and atmospheric pressure conditions. On Titan, the largest moon of Saturn, the role of water is replaced by methane. Methane exists as a gas in Titan's atmosphere, and due to the extremely low temperatures and high atmospheric pressure, it can also exist as a liquid and solid on the moon's surface.
Titan's atmosphere is primarily composed of nitrogen, with small amounts of methane, ethane, and other gases. The presence of methane and other hydrocarbons on Titan has led scientists to speculate about the possibility of life on the moon, although this has yet to be confirmed.
To know more about titan, here
brainly.com/question/31160630
#SPJ4
a compound contains only iron and oxygen. if the compound is 72.34% fe by mass, what is the empirical formula for the compound?
The empirical formula for the compound is [tex]Fe_{3} O_{4}[/tex].
The chemical includes 27.66 g of oxygen and 72.34 g of iron per 100 g.
1. An element's atomic weight and molar mass are equivalent.
Molar mass of Fe {Iron} = 55.845(g/mol)
Molar mass of O {Oxygen} = 15.9994(g/mol)
Divide each percentage by the total entered percentages to bring the entered percentages' sum to 100% as it is less than 100% (current sum is 99.98%).
Fe {Iron} ⇒ 72.34(old%), 72.35447(new%)
O {Oxygen} ⇒ 27.64(old%), 27.64553 (new%)
If you have 100g of substance, you can calculate the mass of each element by multiplying 100g by the percentage as follows:
Mass of Fe {Iron} = 72.35447gm
Mass of O {Oxygen} =27.64553gm
Divide the mass by the molar mass of each element (from step 1) to determine the number of moles:
Fe {Iron}= 72.35447gm/ 55.845(g/mol) *100 = 129.56302moles
O {Oxygen} = 27.64553gm/15.9994(g/mol) *100 = 172.79104moles
Look for the element with the fewest moles. Iron has the fewest moles of any metal, at just 129.56302425316. divide all mole values by this number:
Moles ÷ Moles Fe
Fe {Iron} = 1
O {Oxygen} = 1.33364
The existing mole levels are not particularly near to whole numbers, yet we need full numbers. Divide all sums by the fractional portion of each non-whole quantity to make them nearly whole:
FO = 0.33364466884954
Fe÷ FO = 1/0.33364466884954
Fe {Iron} = 2.9972
O {Oxygen} = 1.33364/0.33364466884954 = 3.9972
The final mole ratios are obtained by rounding each mole quantity to the closest integer:
Fe {Iron}=3
O {Oxygen} = 4
As a result, the compound's empirical formula is [tex]Fe_{3} O_{4}[/tex].
Learn more about empirical formula here:
https://brainly.com/question/9238625
#SPJ4
hydrochloric acid mixed with Magnesium ribbon a chemical or physical change
A chemical shift can be seen in this situation. As further proof that a chemical reaction is occurring, there may also be visible changes including bubbling, gas evolution, and heat emission.
A chemical reaction is defined simply.Chemical reaction is the process by which 1 or more compounds, known as reactants, change into one or more new ones, known as products. Chemical components or compounds make up substances. The atoms that make up the reactants are rearranged in a chemical reaction to produce various products.
How do chemical processes take place?As moving molecules collide with one another, their connections are broken, resulting in an exchange in atoms that creates new products. Another way that substances can react chemically is by vibrating; if they vibrate vigorously enough, they can disintegrate into smaller molecules.
To know more about chemical reaction visit:
https://brainly.com/question/29039149
#SPJ9
Which of the following statements about thermodynamic systems and state functions is CORRECT?
A thermodynamic state function is a value that is independent of a route. As a result, functions like as pressure, volume, and temperature are determined only by the state of a system and not by the path.
Which of the following are the four thermodynamic functions?A thermodynamic potential, also known as a basic function, is a quantity used to indicate a system's state. Internal energy U, enthalpy H, Helmholtz free energy F, and Gibbs free energy G are our four fundamental functions.
State functions or point functions are properties whose value does not depend on the path followed to obtain that value. Path functions, on the other hand, are those functions that do depend on the path between two places.
learn more about thermodynamic state
https://brainly.com/question/26035962
#SPJ1
If 12L of neon at 23 °C is allowed to expand to 52 L, what must the new temperature be to maintain constant pressure?
Charles's Law-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
Where:-
V₁ = Initial volumeT₁ = Initial temperatureV₂ = Final volumeT₂ = Final temperatureAs per question, we are given that -
V₁=12 L T₁ = 23°CV₂ =52 LWe are given the initial in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-
[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 23+ 273 =296K
Now that we have obtained all the required values, so we can put them into the formula and solve for T₂ :-
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{\dfrac{T_2}{V_2}=\dfrac{T_1}{V_1}}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=\dfrac{T_1}{V_1} \times V_2}\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=\dfrac{296}{12} \times 52\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=24.66....... \times 52\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1282.66.........\:K\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=(1282.67 -273)°C\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=1009.66....\:°C\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=1009.67\:°C}\\[/tex]
Therefore, If 12L of neon at 23 °C is allowed to expand to 52 L then the new temperature will become 1009.67°C or 1282.67K to maintain constant pressure.
of the following, which is an emulsifying agent in the given context? select the correct answer below: the dye in paint the casein in milk the water in milk the oil in mayonnaise
The emulsifying agent in the given context is " the oil in mayonnaise."
An emulsifying agent is a substance that stabilizes emulsions by reducing the surface tension between the two phases, such as oil and water. In the context of mayonnaise, oil is the emulsifying agent that binds oil and vinegar or lemon juice into a stable suspension.
The oil in mayonnaise is responsible for the smooth texture and consistent thickness of the condiment. Without the emulsifying action of oil, the vinegar or lemon juice would separate from the oil and create an unpleasant, lumpy texture.
Therefore, the oil in mayonnaise is the correct answer as an emulsifying agent in the given context.
For more question on emulsions
https://brainly.com/question/6677364
#SPJ11
d5w is infusing at 55 gtt/min (55 microgtt/min). drop factor: 60 gtt/ml. how much fluid volume will the client receive in 10 hours? ml 21.
The client will receive 550 ml of fluid volume over a period of 10 hours if D5W is infusing at 55 gtt/min with a drop factor of 60 gtt/ml.
To calculate the fluid volume that the client will receive in 10 hours, we need to use the following formula:
Volume (in ml) = Flow rate (in gtt/min) x Time (in min) / Drop factor (in gtt/ml)
Given that the D5W solution is infusing at a rate of 55 gtt/min and the drop factor is 60 gtt/ml, we can plug in these values to the formula:
Volume (in ml) = 55 gtt/min x 600 min / 60 gtt/ml
Simplifying the equation, we get:
Volume (in ml) = 550 ml
To learn more about drop factor
https://brainly.com/question/8210596
#SPJ4
which compound name does not correspond to an ionic compound? select one: phosphorus pentafluoride silver iodide magnesium bromide molybdenum(v) chloride
Phosphorus pentafluoride is not an ionic compound. Option A is correct.
Phosphorus pentafluoride (PF₅) is a covalent compound composed of one phosphorus atom and five fluorine atoms. It is a colorless, toxic, and reactive gas that is used in various chemical reactions and as a reagent in the synthesis of other chemical compounds.
The PF₅ molecule has a trigonal bipyramidal shape, with the phosphorus atom at the center and the five fluorine atoms arranged around it. The molecule has a dipole moment and is polar, which makes it soluble in polar solvents such as water.
An ionic compound is a type of chemical compound that is formed by the attraction of positively and negatively charged ions. In an ionic compound, one or more atoms will lose electrons to form a positively charged ions known as cations, while one or more atoms gain electrons to form negatively charged ions known as anions.
Hence, A. is the correct option.
To know more about ionic compound here
https://brainly.com/question/9167977
#SPJ4
--The given question is incomplete, the complete question is
"Which compound name does not correspond to an ionic compound? select one: A) phosphorus pentafluoride B) silver iodide C) magnesium bromide D) molybdenum(v) chloride."--
The emission of radiation by a sample of fluorine-18 is measured as
64 mCi at 10:30 AM and as 4.0 mCi at 3:30 PM on the same day. The
half-life of fluorine-18 is
F-18 has a biological half-life of about 6 hours and a physical half-life of 1.83 hours, making its active half-life roughly 1.4 hours (7). Fluorine F 18 has a half-life is 109.7 minutes and decays by positron,(+) emission.
What kind of radiation does fluorine-18 emit?Positrons are released by this fluorine radioactive isotope. A radioactive version of glucose that's also easily absorbed by cancer cells as well as normal cells can be created using F-18. Nuclear imaging can be used to locate tumours, map brain activity, and identify other diseases.
What is fluorine-18's isotope composition?A key source of positrons is the fluorine radioisotope fluorine-18 (18F). Its half-life was 109.771(20) minutes, and its mass is 18.0009380(6) u. 96% of the time, it decays via positron emission, and 4% by electron capture.
To know more about positron visit:
https://brainly.com/question/21275312
#SPJ1
which is not a method to reduce the emissions of particulate matter? group of answer choices scrubbers smokestacks fluidized bed combustion fabric filters electrostatic precipitator
Answer: Smokestacks are not a method to reduce the emissions of particulate matter.
Explanation: Smokestacks are the structures that release the emissions into the atmosphere. The other options listed - scrubbers, fluidized bed combustion, fabric filters, and electrostatic precipitators are all methods to reduce particulate matter emission.
The method that is not used to reduce the emissions of particulate matter is "Smokestacks".
Smokestacks are not a method to reduce the emissions of particulate matter. Smokestacks are the exhaust pipes in industries that emit the waste products into the atmosphere. Smokestacks are installed in the factories for the removal of flue gases produced during the combustion process.
Scrubbers, Fluidized bed combustion, Fabric filters, and Electrostatic precipitator are some methods used to reduce the emissions of particulate matter. These are explained below:
Scrubbers are used to eliminate acidic gases ([tex]SO_2[/tex] and NOx) as well as particulate matter from industrial flue gas. When flue gases enter a scrubber, they are exposed to a liquid solution that contains a base. [tex]SO_2[/tex] and NOx gases are neutralized as they pass through this solution, and particulate matter is trapped.
Fluidized bed combustion: In this method, the fuel is burned in a bed of inert particles at a high temperature, resulting in less NOx emissions and the release of less particulate matter into the atmosphere.
Fabric filters are used to filter out fine particles from flue gases by trapping them in woven filter bags. The bags are cleaned regularly to keep them functional.
Electrostatic precipitators use electrical charges to remove particulate matter from flue gases. Particles are ionized by a high-voltage electric field and then collected on oppositely charged plates, resulting in clean flue gas being released into the environment.
To know more about Smokestacks
brainly.com/question/30754998
#SPJ11
what source of, and how much, energy is used to heat massive amounts of water to boiling temperature for steam?
The source of energy used to heat massive amounts of water to boiling temperature for steam can vary, depending on the specific context and application. However, some common sources of energy used for this purpose include: Fossil fuels, Nuclear energy, and Renewable energy.
Fossil Fuels: Coal, oil, and natural gas are commonly used as fuels to produce steam. They are burned to generate heat, which is then transferred to the water to increase its temperature.
Nuclear Energy: Nuclear power plants use the energy released by nuclear reactions to generate heat, which is then used to produce steam.
Renewable Energy: Renewable sources of energy such as solar, wind, geothermal, and hydroelectric power can also be used to produce steam. For example, solar thermal power plants use sunlight to heat a fluid, which is then used to generate steam.
The amount of energy required to heat massive amounts of water to boiling temperature for steam production depends on various factors, such as the volume of water being heated, the desired temperature, and the efficiency of the heating system.
To know more about boiling temperature here
https://brainly.com/question/22765691
#SPJ4
10.the recommended pediatric iv dosage of furosemide is 1 mg/kg not to exceed 6 mg/kg. the child weighs 55 lb. available: furosemide 20 mg/2 ml. how many ml will the child receive?
The recommended pediatric iv dosage of furosemide is 1 mg/kg not to exceed 6 mg/kg. the child weighs 55 lb. available: furosemide 20 mg/2 ml. The child will receive approximately 2.5 mL of furosemide.
To determine the appropriate dosage of furosemide for the child, first convert their weight from pounds to kilograms.
1 lb = 0.453592 kg
55 lb × 0.453592 kg/lb ≈ 24.95 kg
Now, calculate the dosage using the recommended pediatric IV dosage (1 mg/kg):
24.95 kg × 1 mg/kg ≈ 24.95 mg
Since the dosage should not exceed 6 mg/kg:
24.95 kg × 6 mg/kg = 149.7 mg (maximum dosage)
Since the child's calculated dosage (24.95 mg) is less than the maximum dosage, it can be administered.
Next, determine the volume of furosemide to be given. The available concentration is 20 mg/2 mL. Use the proportion:
20 mg/2 mL = 24.95 mg/x mL
Solve for x:
x = (24.95 mg × 2 mL) / 20 mg ≈ 2.495 mL
Therefore,the dosage of furosemide that will be received by the child is 2.5 mL
For more such questions on furosemide, click on:
https://brainly.com/question/14402120
#SPJ11
What is the p0H of water
Answer:7 at 25 °C
Explanation:
but when exposed to the carbon dioxide equilibrium results in a pH of approximately 5.2 because CO2 in the air dissolves in the water and forms carbonic acid.
Answer:
The pH of pure water (H20) is 7 at 25 °C,
Explanation:
Hope this helps!!
Mark me brianliest :))
Roger heats a brass metal cube (specific heat = 375 J/kg·°C) to 70.0°C and places the cube into an insulated container of water (specific heat = 4182 J/kg·°C). He observes that the water temperature increases from 10.0°C to a final temperature of 18.0°C. What is the final temperature of the metal cube?
He notices a rise in the water's temperature from 10.0°C to 18.0°C in total. The metal cube's final temperature is 69.04°C.
How can you determine the metal cube's final temperature?Q = mcT, where Q is the heat dissipated by the cube, m is its mass, c is its specific heat, and T is its change in temperature.
The formula for the energy the water gains is Q = mcT.
mcT = mcT (cube) (water)
When we solve for the cube's final temperature, we obtain:
Tcube = (m cube c cube) / (m water c water)
Tcube is equal to (18.0°C - 10.0°C) 1 kg times 4182 J/kg°C and 1 kg times 375 J/kg°C
Tcube equals 0.96 °C
Final temperature: 70 °C minus 0.96 °C equals 69.04 °C.
To learn more about final temperature visit:
brainly.com/question/11244611
#SPJ1
A reaction's rate constant is measured to be 0.145 1/(M x s). Later on, the same reaction is run again, but this time, the rate constant is measured to be 0.456 1/(M x s). Compare the temperatures at which both measurements were made.
A) The first reaction took place at a higher temperature.
B) The second reaction took place at a higher temperature.
C) Both reactions took place at the same temperature.
D) There is not enough information given to compare the temperatures.
Answer: The second reaction took place at a higher temperature
Explanation:
Rate is affected by temperature, as higher temperatures cause the reacting molecules to have more energy.
Collision theory states that in order for a reaction to occur, each reacting molecule must collide with one another in the correct orientation and with enough energy, called the activation energy.
A higher energy caused by a higher temperature will cause the molecules to collide much more frequently, leading to a higher chance of a successful collision, and with more energy to satisfy the activation energy.
Therefore, the second reaction must have taken place at a higher temperature, since the molecules had more energy than the first reaction leading to a higher rate of reaction, and a higher rate constant.