The back and forward tangents AV, and VB of a highway meet at station 30+75.00. The angle of intersection, I, is 32°00'. It is desired to connect these two tangents by a circular curve whose degree of curve, by the chord definition, is Da=4°00'.
a) Calculate, R, the radius of this curve, T, the tangent distance, L, the length of the curve, M, the middle ordinate, E, the external distance, and the stations of the beginning of curve, A, and its end, B

Answer:   for the solution y(t) to be non-zero for all t, β must not equal 48. In interval notation, the valid range for β is (-∞, 48) U (48, +∞).

To find the solution of the given second-order differential equation, let's first solve the characteristic equation:

r^2 - 5r - 24 = 0

Using the quadratic formula, we can find the roots:

r = (5 ± √(5^2 - 4(1)(-24))) / 2

r = (5 ± √(25 + 96)) / 2

r = (5 ± √121) / 2

r = (5 ± 11) / 2

So the roots are:

r₁ = (5 + 11) / 2 = 8

r₂ = (5 - 11) / 2 = -3

The general solution of the differential equation is given by:

y(t) = c₁ * e^(r₁t) + c₂ * e^(r₂t)

To find the specific solution, we need to use the initial conditions y(0) = 6 and y'(0) = β.

Substituting t = 0, y(0) = 6 into the equation:

6 = c₁ * e^(r₁ * 0) + c₂ * e^(r₂ * 0)

6 = c₁ + c₂

Next, substituting t = 0, y'(0) = β into the equation:

β = c₁ * r₁ * e^(r₁ * 0) + c₂ * r₂ * e^(r₂ * 0)

β = c₁ * r₁ + c₂ * r₂

We can solve these two equations simultaneously to find c₁ and c₂:

c₁ + c₂ = 6 (Equation 1)

c₁ * r₁ + c₂ * r₂ = β (Equation 2)

Now, we can solve Equation 1 for c₁:

c₁ = 6 - c₂

Substituting this value of c₁ into Equation 2:

(6 - c₂) * r₁ + c₂ * r₂ = β

Simplifying:

6r₁ - c₂r₁ + c₂r₂ = β

(6r₁ + c₂(r₂ - r₁)) = β

c₂(r₂ - r₁) = β - 6r₁

c₂ = (β - 6r₁) / (r₂ - r₁)

Now substitute this value of c₂ into Equation 1:

c₁ = 6 - c₂

c₁ = 6 - (β - 6r₁) / (r₂ - r₁)

Finally, we can substitute c₁ and c₂ into the general solution to obtain the particular solution for the given initial conditions:

y(t) = c₁ * e^(r₁t) + c₂ * e^(r₂t)

y(t) = (6 - (β - 6r₁) / (r₂ - r₁)) * e^(r₁t) + ((β - 6r₁) / (r₂ - r₁)) * e^(r₂t)

Now let's analyze the solutions for different values of β:

For which value of β does the solution satisfy lim_y(t)→[infinity] = 0?

To satisfy this condition, the exponential terms in the particular solution must approach zero as t approaches infinity. Therefore, for the solution to tend to zero, we need r₁ and r₂ to be negative values (real roots). This happens when the discriminant of the characteristic equation is positive.

Discriminant = 5^2 - 4(1)(-24) = 25 + 96 = 121

Since the discriminantis positive (121 > 0), the roots r₁ and r₂ are real and the solution tends to zero as t approaches infinity for any value of β.

β can be any real number.

For which value(s) of β is the solution y(t) ≠ 0 for all t?

To ensure that the solution y(t) is never zero for all t, we need the coefficients c₁ and c₂ to be non-zero. From the expressions we obtained for c₁ and c₂:

c₁ = 6 - (β - 6r₁) / (r₂ - r₁)

c₂ = (β - 6r₁) / (r₂ - r₁)

For c₁ and c₂ to be non-zero, the numerator (β - 6r₁) must be non-zero, and the denominator (r₂ - r₁) must be non-zero as well. Let's examine these conditions:

The numerator (β - 6r₁) ≠ 0:

β - 6r₁ ≠ 0

β ≠ 6r₁

The denominator (r₂ - r₁) ≠ 0:

r₂ - r₁ ≠ 0

We already know the values of r₁ and r₂:

r₁ = 8

r₂ = -3

Now we can substitute these values into the conditions:

β ≠ 6r₁

β ≠ 6(8)

β ≠ 48

r₂ - r₁ ≠ 0

-3 - 8 ≠ 0

-11 ≠ 0

Therefore, for the solution y(t) to be non-zero for all t, β must not equal 48. In interval notation, the valid range for β is (-∞, 48) U (48, +∞).

Learn more about second-order differential equation:

https://brainly.com/question/16397430

#SPJ11

Total mass of reactants that are left over is 1.52 g Cr2O3 and 0 g Si (since all the Si has been used up).  

We are given: 9.67 g Cr2O3, 4.28 g Si. To find out the total mass of reactants that are left over, we will have to calculate the theoretical amount of each reactant required to produce the desired product and then subtract the actual amount of each reactant from the theoretical amount of each reactant.

Let's write the balanced chemical equation for the reaction:

Cr2O3 + 2 Si → 2 Cr + SiO2

First we will calculate the amount of each reactant required to produce the product Chromium:

A1 mole of Cr is produced from 1/2 mole of Cr2O3

Therefore, 1 mole of Cr2O3 is required to produce 2 moles of Cr

Molar mass of Cr2O3 = 2 x 52 + 3 x 16 = 152 g/mol

Therefore, 9.67 g Cr2O3 contains:

9.67 g / 152 g/mol = 0.0636 mol Cr2O3

So, Chromium (Cr) produced = 0.0636 × 2

= 0.1272 mol

Cr is produced from 1 mole of Si,

So, the amount of Si required = 0.1272 mol

Therefore, the mass of Si required

= 0.1272 × 28.08

= 3.573 g

Si is given = 4.28 g

Therefore, Si is in excess in the reaction and Cr2O3 is the limiting reactant.

Amount of Cr2O3 left after the reaction:0.0636 mol Cr2O3 - 0.1272/2 mol Cr2O3 = 0.01 mol Cr2O3

Mass of Cr2O3 left = 0.01 × 152

= 1.52 g

Therefore, the total mass of reactants that are left over is 1.52 g Cr2O3 and 0 g Si (since all the Si has been used up).

So the answer is:

Total mass of reactants that are left over is 1.52 g Cr2O3 and 0 g Si (since all the Si has been used up).  

To know more about reactants visit-

https://brainly.com/question/30129541

#SPJ11

Answer:

Step-by-step explanation:

If y varies directly as x, it means that the ratio of y to x remains constant. We can express this relationship using the equation:

y = kx

where k is the constant of variation.

Given that y is 180 when x is n, we can write:

180 = kn

Similarly, when y is n, x is 5:

n = k(5)

To find the value of n, we can equate the two expressions for k:

kn = k(5)

Dividing both sides by k (assuming k ≠ 0):

n = 5

Therefore, the value of n is 5.

Process Flowchart, Balance Equation and Solution. Process Flowchart:. Balance equation on total moles: Total input = Total output(accumulation = 0)F = L + VF = 10 kmol/h, xF = 0.35L = ? kmol/h, xL = 0.187V = ? kmol/h.

Balance equation on acetone moles:

Input = Output + Generation - Consumption0.35

F = 0.187 L + 0.75 V + 0 (no reaction in evaporator)

F = 10 kmol/h0.35 × 10 kmol/h

0.187 L + 0.75 V 3.5 kmol/h = 0.187 L + 0.75 V(1).

Mass Balance on evaporator:

L + V = F L

F - V  L = 10 kmol/h - V V

10 kmol/h - V V = ? kmol/h  

Process Flowchart, Integral Balance, and Solution. Process flowchart. Integral balance on total moles

: Initial moles of acetone = 10 × 0.35 = 3.5 kmol Let ‘x’ be the fraction of acetone vaporized xn = fraction of acetone in vapor =

0.75 x Initial moles of acetone = final moles of acetone

3.5 - 3.5x = (10 - x)0.187 + x(0.75 × 10)

Solve for x to obtain: x = 0.512 kmol of acetone in vapor (n) = 10(0.512) = 5.12 kmol moles of acetone in liquid (my)

3.5 - 0.512 = 2.988 kmol  Discrepancy between measured and calculated liquid acetone composition Reasons for discrepancy between the measured and calculated liquid acetone composition are:

Assumed steady-state may not have been achieved. Mean residence time assumed may be incorrect. The effect of vapor holdup in the evaporator has been ignored.The rate of acetone vaporization may not be instantaneous. A possible bypass stream may exist.

The detailed process flowchart, balance equations, and solutions are given in parts a and b. Part c considers the discrepancy between the measured and calculated liquid acetone composition. Reasons for the discrepancy were then given.  This question requires the development of a process flowchart and the application of balance equations. In Part a, the steady-state continuous process is examined.

A feed of a liquid mixture of acetone and water containing 35 mol% acetone is partially evaporated to produce a vapor containing 75 mol% acetone and a residual liquid containing 18.7 mol% acetone. At steady state, the rate of feed is 10.0 kmol/h, and the rate of the vapor and liquid product streams is required. Total and acetone balances were used to determine the values of n and L, respectively. In Part b, the process is examined when carried out in a closed container. The initial volume of the liquid mixture is 10.0 kmol.

The required moles of final vapor and liquid phases are calculated by solving integral balances on total moles and on acetone.In Part c, discrepancies between measured and calculated liquid acetone compositions are examined. Five reasons were given for discrepancies between measured and calculated values, including the possibility of an incorrect residence time, non-achievement of steady-state, the effect of vapor holdup being ignored, non-instantaneous rate of acetone vaporization, and a possible bypass stream.

The question requires the application of balance equations and the development of process flowcharts. The process is considered under continuous and closed conditions. The discrepancies between measured and calculated values are examined, with five reasons being given for the differences.

To learn more about Balance equation visit:

brainly.com/question/12405075

#SPJ11

13. Comparing the results, we see that option A, g(sin x) cos x, is equivalent to g(x). Therefore, the correct answer is A.

14. The given expression is equal to -√(8(t + x)) - √(8t).

13. If g(x) is a continuous function, then A. g(sin x) cos x B. -g(cos x) cos x C. g(sin x) sin x D. g(sin x)

To determine which expression is equivalent to g(x), we can substitute x with a specific value, such as x = 0, and evaluate each option.

Let's consider option A: g(sin x) cos x. Substituting x = 0, we have g(sin 0) cos 0 = g(0) * 1 = g(0).

Similarly, for option B: -g(cos x) cos x, substituting x = 0 gives us -g(cos 0) cos 0 = -g(1) * 1 = -g(1).

For option C: g(sin x) sin x, substituting x = 0 yields g(sin 0) sin 0 = g(0) * 0 = 0.

Finally, for option D: g(sin x), substituting x = 0 gives us g(sin 0) = g(0).

14. The given expression involves a derivative and an integral. To solve it, we need to use the Fundamental Theorem of Calculus, which states that if F(x) is the antiderivative of f(x), then the definite integral of f(x) from a to b is equal to F(b) - F(a).

Using this theorem, we can rewrite the expression as follows:

sin x d (fon 8(t) dt) = - dx d/ (√²8 (t + x) dt)

The derivative of the integral with respect to x is equal to the derivative of the upper limit of integration multiplied by the derivative of the integrand evaluated at the upper limit, minus the derivative of the lower limit of integration multiplied by the derivative of the integrand evaluated at the lower limit.

Therefore, the expression simplifies to:

-√(8(t + x)) - √(8t)

Learn more about function:

https://brainly.com/question/30721594

#SPJ11

The (2t)=t², where " denotes convolution (2t) × (2t) = (2/3)t³.

The expression (2t) × (2t) represents the convolution of the functions 2t and 2t. To calculate this convolution, to integrate the product of the two functions over their overlapping range.

Let's start by finding the product of the two functions:

(2t) × (2t) = ∫[0 to t] (2τ)(2(t-τ)) dτ

Next, we can simplify the integrand:

(2τ)(2(t-τ)) = 4τ(t-τ) = 4tτ - 4τ²

integrate this expression with respect to τ:

∫[0 to t] (4tτ - 4τ²) dτ

To find the integral, split it into two separate integrals:

∫[0 to t] 4tτ dτ - ∫[0 to t] 4τ² dτ

Integrating each term:

= 4t × ∫[0 to t] τ dτ - 4 × ∫[0 to t] τ² dτ

= 4t ×[(τ²)/2] evaluated from 0 to t - 4 × [(τ³)/3] evaluated from 0 to t

= 4t × [(t²)/2] - 4 × [(t³)/3]

= 2t³ - (4/3)t³

= (2 - 4/3)t³

= (6/3 - 4/3)t³

= (2/3)t³

To know more about convolution here

https://brainly.com/question/32325099

#SPJ4

Hence, the balanced oxidation half-reaction is: N₂H₄ → 2NH₂⁺ + 2e⁻

In the given oxidation-reduction reaction under basic conditions:

N₂H₄ + SNH₂OH + S²⁻ → Reactants → Products

We need to write the balanced oxidation half-reaction. To do this, we need to identify the element that is being oxidized. In an oxidation-reduction reaction, oxidation refers to the loss of electrons.
In this reaction, the element N₂ is being oxidized because it goes from an oxidation state of 0 to +2.
We can represent this oxidation half-reaction as N₂H₄ → 2NH₂⁺ + 2e⁻

In this reaction, each N atom gains 1 electron to become NH₂⁺. This is because N₂H₄ has two N atoms, and each N atom gains 1 electron.

Learn more about Balancing Chemical Reactions:

https://brainly.com/question/11904811

#SPJ11

Student A has more accurate data because their average concentration is closer to the actual concentration of the commercial product.

Student A has more precise data because their range (variability) is smaller than Student B's range.

Let's calculate the average concentration for each student:

Student A:

Average concentration = (4.01% + 3.95% + 4.03%) / 3 = 4.00%

Student B:

Average concentration = (3.46% + 3.52% + 4.00%) / 3 = 3.66%

Comparing the average concentrations, we can see that Student A's average concentration (4.00%) is closer to the actual concentration of the commercial product than Student B's average concentration (3.66%). Therefore, Student A has more accurate data because their average concentration is closer to the actual value.

In this case, we can compare the range or the differences between the highest and lowest values obtained by each student.

Student A:

Range = 4.03% - 3.95% = 0.08%

Student B:

Range = 4.00% - 3.46% = 0.54%

Comparing the ranges, we can see that Student A's range (0.08%) is smaller than Student B's range (0.54%). A smaller range indicates less variability, which means the measurements are more precise. Therefore, Student A has more precise data because their range is smaller.

To know more about average here

https://brainly.com/question/16956746

#SPJ4

Complete Question:

Use the following information to answer parts A and B. Recall the H₂O₂ % of the commercial product that was supplied to you. Through their three trials for this week’s experiment, Student A calculated the concentration of a commercial sample of H₂O₂ solution to be 4.01%, 3.95%, and 4.03%. Student B analyzed the same sample through the same experimental procedure but obtained final calculated values for the H₂O₂ sample’s concentration to be 3.46%, 3.52%, and 4.00%.

One of these students has measured an average concentration which is closer to the actual concentration of the commercial product than the other student. Based on a preliminary assessment of the spread of the data which student has more accurate data and which student has more precise data? Why?

Answer: x = 6

Step-by-step explanation:

To solve, we will isolate the x-variable.

Given:

     2x + 7 = 19

Subtract 7 from both sides of the equation:

     2x = 12

Divide both sides of the equation by 2:

     x = 6

Answer:

x = 6

Step-by-step explanation:

Given equation,

→ 2x + 7 = 19

Now we have to,

→ Find the required value of x.

Then the value of x will be,

→ 2x + 7 = 19

Subtracting the RHS with 7:

→ 2x = 19 - 7

→ 2x = 12

Dividing RHS with number 2:

→ x = 12/2

→ [ x = 6 ]

Hence, the value of x is 6.

The angle of the surface tension film that leaves the glass for the vertical tube immersed in water is approximately 36.86 degrees.

To compute the angle of the surface tension film that leaves the glass for a vertical tube immersed in water, we can use the formula:
θ = 2 * arcsin(h / d)
Where:
θ is the angle of the surface tension film
h is the capillary rise
d is the diameter of the tube

The diameter (d) is 0.25 in and the capillary rise (h) is 0.08 inches, we can substitute these values into the formula:
θ = 2 * arcsin(0.08 / 0.25)
Now, we need to evaluate the expression inside the arcsin function:
0.08 / 0.25 = 0.32

So, the expression becomes:
θ = 2 * arcsin(0.32)

To calculate the value of arcsin(0.32), we can use a scientific calculator or lookup table. In this case, the value of arcsin(0.32) is approximately 18.43 degrees.
Now, we can substitute this value back into the formula:
θ = 2 * 18.43
θ = 36.86 degrees

You can learn more about surface tension at: brainly.com/question/571207

#SPJ11

 the reaction of slowly adding cabbage extract indicator solution into vinegar is similar to the reaction of an acid-base indicator. It demonstrates the ability of the cabbage extract to change color in response to changes in pH, indicating the acidic nature of the vinegar.

The reaction of slowly adding cabbage extract indicator solution into a small amount of vinegar (approximately 15ml) in a cup is similar to the reaction of an acid-base indicator.

1. First, let's understand what an indicator is. An indicator is a substance that changes color in response to a change in the pH level of a solution.

2. In this case, the cabbage extract acts as an indicator. It contains a pigment called anthocyanin, which changes color depending on the pH of the solution it is added to.

3. Vinegar is an acidic solution, which means it has a low pH. When the cabbage extract indicator solution is added to vinegar, it will change color due to the acidic nature of vinegar.

4. The color change observed is similar to the reaction of an acid-base indicator. Acid-base indicators are substances that change color depending on whether the solution is acidic or basic.

5. For example, litmus paper is a commonly used acid-base indicator. It turns red in the presence of an acid and blue in the presence of a base.

6. Similarly, the cabbage extract indicator changes color in the presence of an acid, indicating the acidic nature of the vinegar.

7. The specific color change observed will depend on the pH of the vinegar and the concentration of the cabbage extract indicator used. Typically, the cabbage extract indicator will change from purple or blue to pink or red when added to an acidic solution like vinegar.

Overall, the reaction of slowly adding cabbage extract indicator solution into vinegar is similar to the reaction of an acid-base indicator. It demonstrates the ability of the cabbage extract to change color in response to changes in pH, indicating the acidic nature of the vinegar.

To learn more about Acid-base indicators:

https://brainly.com/question/1918667

#SPJ11

Answer:   the cathode reaction for K2SO4 is the reduction of potassium ions (K+) to form potassium atoms (K).

The cathode reaction for K2SO4 involves the reduction of ions at the cathode during electrolysis. In this case, the ions present in K2SO4 are potassium (K+) and sulfate (SO42-).

The cathode reaction can be determined by considering the reduction potentials of the ions involved. The ion with the highest reduction potential will be reduced at the cathode.

In the case of K2SO4, the reduction potential of potassium (K+) is lower than that of sulfate (SO42-). Therefore, potassium ions will be reduced at the cathode.

The reduction of potassium ions (K+) at the cathode can be represented by the following half-reaction:

K+ + e- → K

This reaction involves the gain of an electron (e-) by a potassium ion (K+) to form a neutral potassium atom (K).

To summarize, the cathode reaction for K2SO4 is the reduction of potassium ions (K+) to form potassium atoms (K).

To learn more about cathode reaction:

https://brainly.com/question/32774287

#SPJ11

The value of (f(x) × g(x))′ at x=c is 104.

The value of (f(x) × g(x))′ at x=c can be found by applying the product rule of differentiation.

According to the product rule, if we have two functions f(x) and g(x), then the derivative of their product is given by the formula:

(f(x) × g(x))′ = f′(x) × g(x) + f(x) × g′(x)

Given that f(c) = -5, f′(c) = 13, and g′(c) = 13, we can substitute these values into the formula to find the value of (f(x) × g(x))′ at x=c.

Substituting the given values into the formula, we have:

(f(x) × g(x))′ = f′(x) × g(x) + f(x) × g′(x)

(f(x) × g(x))′ = 13 × g(x) + (-5) × 13

(f(x) × g(x))′ = 13g(x) - 65

Since we are interested in the value at x=c, we substitute c into the expression:

(f(x) × g(x))′ = 13g(c) - 65

Finally, substituting the value of g′(c) = 13, we have:

(f(x) × g(x))′ = 13 × 13 - 65

(f(x) × g(x))′ = 169 - 65

(f(x) × g(x))′ = 104

Therefore, the value of (f(x) × g(x))′ at x=c is 104.

Learn more about derivative from the given link

https://brainly.com/question/28376218

#SPJ11  

The urbanization affects the receiving water in the following ways: Rainwater cannot infiltrate the soil in urban areas because of the high degree of impervious surface coverage and the absence of a cohesive soil structure.

As a result, the majority of the precipitation flows directly into surface waters, leading to an increase in the volume and rate of flow in the drainage basin.A lack of vegetation and trees results in increased stormwater runoff, which can cause more flooding and erosion, as well as increased water temperature due to the absence of shade. As a result, higher water temperatures can cause a decrease in the amount of oxygen in the water, causing harm to fish and other aquatic organisms.Heavy metals, hydrocarbons, pesticides, and other pollutants are found in urban runoff due to the presence of impervious surfaces and human activities. These pollutants can cause harm to aquatic life and reduce the water quality.

Conventional drainage systems that are separate work as follows:The sanitary sewers collect wastewater from homes and other structures, while the storm sewers collect rainwater and snowmelt. Each set of pipes transports water to separate treatment facilities. The wastewater treatment plant receives sewage and other types of wastewater from sanitary sewers. These treatment facilities purify the water to make it safe to discharge into rivers, lakes, or oceans. The stormwater drainage systems in cities frequently do not get treated before they enter the receiving waters.The major drawback of using separate conventional drainage systems is that they transport huge volumes of polluted stormwater runoff, which pollutes rivers, streams, and other aquatic habitats. They also transport pollutants that accumulate on streets and other impervious surfaces during dry periods when little or no rainfall is present.

To know more about cohesive visit:

https://brainly.com/question/31934169

#SPJ11

The factor of safety with respect to shear failure for the strip footing is approximately 0.049 when φ' = 0° and cu = 105 kN/m² is 0.049 and it is approximately 2.78 when φ' = 28° and cu = 10 kN/m² is 2.78.

The factor of safety with respect to shear failure for the given strip footing can be determined as follows:

(a) When cu = 105 kN/m² and φ' = 0:

The effective stress at the base of the footing can be calculated using the formula: qnet = q - γw ×  d, where q is the applied load, γw is the unit weight of water, and d is the depth of the footing. In this case, qnet = 430 - (21 ×  1) = 409 kN/m². The ultimate bearing capacity of the clay can be determined using Terzaghi's equation: qult = cNc + qNq + 0.5γBNγ, where c is the cohesion, Nc, Nq, and Nγ are bearing capacity factors, and γB is the bulk unit weight of the soil. For φ' = 0°, Nc = 5.4. Substituting the given values,

qult = (0 ×  5.4) + (409 ×  0) + (0.5 × 21 ×  2) = 21 kN/m²

The factor of safety (FS) is then calculated by dividing the ultimate bearing capacity by the applied load:

FS = qult / q = 21 / 430 ≈ 0.049.

(b) When cu = 10 kN/m² and φ' = 28°:

Using the given values of φ' = 28°, we can determine the bearing capacity factors from the provided data:

Nc = 26, Nq = 15, and Nγ = 13.

Substituting these values along with the net pressure

qnet = 430 - (21 × 1) = 409 kN/m² and the cohesion c = 10 kN/m² into Terzaghi's equatio× , we have

qult = (10 ×  26) + (409 ×  15) + (0.5 ×  21 ×  2 ×  13) = 1,197 kN/m²

The factor of safety is then calculated as FS = qult / q = 1,197 / 430 ≈ 2.78.

To learn more about shear refer:

https://brainly.com/question/2973519

#SPJ11

(a) The factor of safety against shear failure when cu=105 kN/m² and ø'=0 is 1.

(b) The factor of safety against shear failure when cu=10 kN/m² and ø'=-28° is 0.004.

The factor of safety with respect to shear failure for a strip footing carrying a load of 430 kN/m can be determined as follows:

(a) When cu=105 kN/m² and ø'=0:

The factor of safety (FS) can be calculated as:

[tex]\[ FS = \frac{cu}{\gamma \times N_c \times B \times N_q} \][/tex]

Substituting the given values: cu=105 kN/m², γ=21 kN/m³, B=2 m, and Nc=5, we have:

[tex]\[ FS = \frac{105 \, \text{kN/m}^2}{21 {kN/m^2} \times 5 \times 2 \, \text{m}} = 1 \][/tex]

(b) When cu=10 kN/m² and ø'=-28°:

The factor of safety (FS) can be calculated as:

[tex]\[ FS = \frac{cu}{\gamma \times N_c \times B \times N_q} \][/tex]

Substituting the given values: cu=10 kN/m², γ=21 kN/m³, B=2 m, Nc=26, and Nq=15, we have:

[tex]\[ FS = \frac{10 \, {kN/m}^2}{21 \, {kN/m^3} \times 26 \times 2 \, \text{m} \times 15} = 0.004 \][/tex]

To learn more about shear refer:

https://brainly.com/question/30464657

#SPJ11

a) The concentration of H₂ is 0, the pH of the solution is undefined. b) The concentration of H₂ is 0, so the pH of the solution is undefined.

To calculate the pH of the solution after the addition of NaH solution, we need to consider the reaction between NO and NaH, and the resulting change in concentration of the species.

The reaction between NO and NaH is as follows:

NO + NaH → NaNO + H₂

Given:

Initial concentration of NO = 0.08 M

Initial volume of NO solution = 30 ml

Concentration of NaH = 0.10 M

Volume of NaH solution added = 12 ml (for part a) and 24 ml (for part b)

K value for the reaction = 4.57 x 10⁴

a) After adding 12.0 ml of NaH solution:

To calculate the final concentration of NO, we need to consider the stoichiometry of the reaction. For every 1 mole of NO reacted, 1 mole of NaNO is formed.

Initial moles of NO = Initial concentration of NO * Initial volume of NO solution

= 0.08 M * (30 ml / 1000)

= 0.0024 moles

Moles of NO reacted = Moles of NaNO formed = 0.0024 moles

Final moles of NO = Initial moles of NO - Moles of NO reacted

= 0.0024 moles - 0.0024 moles

= 0 moles

Final volume of the solution = Initial volume of NO solution + Volume of NaH solution added

= 30 ml + 12 ml

= 42 ml

Final concentration of NO = Final moles of NO / Final volume of the solution

= 0 moles / (42 ml / 1000)

= 0 M

Now, we can calculate the pH using the equilibrium expression for NO:

K = [NaNO] / [NO] * [H₂]

Since the concentration of NO is 0, the equilibrium expression simplifies to:

K = [NaNO] / [H₂]

[H₂] = [NaNO] / K

= 0 / 4.57 x 10⁴

= 0

As the concentration of H₂ is 0, the pH of the solution is undefined.

b) After adding 24.0 ml of NaH solution:

Using the same calculations as in part a), we find that the final concentration of NO is 0 M and the final volume of the solution is 54 ml.

Following the same equilibrium expression, we have:

K = [NaNO] / [H₂]

[H₂] = [NaNO] / K

= 0 / 4.57 x 10⁴

= 0

Again, the concentration of H2 is 0, so the pH of the solution is undefined.

In both cases, the pH of the solution after the addition of NaH solution is undefined due to the absence of H2 in the reaction and solution.

To know more about concentration:

https://brainly.com/question/31906648

#SPJ4

The estimated radius of a neon atom is approximately 2.36 x [tex]10^{-10}[/tex] meters.

To determine the volume excluded per molecule of neon, we can use the van der Waals equation of state:

[tex](P + a(n^{2}/V^{2}))(V - nb) = nRT[/tex]

Where:

P = Pressure

V = Volume

n = Number of moles

R = Gas constant

a = van der Waals constant

b = co-volume

We need to rearrange the equation to solve for the excluded volume (Vex):

Vex = V - nb

Given:

P = 43.08 atm

V = 1 L

n = 1.6 moles

[tex]R = 0.0821 L atm K^{-1} mol^{-1}[/tex]

[tex]a = 0.212 L^{2} atm mol^{-2}[/tex]

First, let's calculate the value of b:

[tex]b = (0.0821 L atm K^{-1} mol^{-1}) * (323 K) / (43.08 atm)[/tex]

[tex]b = 0.615 L mol^{-1}[/tex]

Now, we can calculate the excluded volume:

Vex = V - nb

[tex]Vex = 1 L - (1.6 mol * 0.615 L mol^{-1})[/tex]

Vex = 0.016 L

The excluded volume per molecule (Vex/molecule) can be determined by dividing Vex by the number of moles of neon (n):

Vex/molecule = Vex / (n * Avogadro's number)

Given:

Avogadro's number = [tex]6.023 x 10^{23} molec/mol[/tex]

Vex/molecule =[tex](0.016 L) / (1.6 mol * 6.023 x 10^{23} molec/mol)[/tex]

Vex/molecule = [tex]1.655 x 10^{-26)} L/molec[/tex]

Now, let's estimate the radius of a neon atom using the excluded volume. Assuming a spherical neon atom, the volume excluded by one neon atom (Vatom) is related to its radius (r) as:

Vatom = (4/3) * π *[tex]r^3}[/tex]

Since Vatom is equal to Vex/molecule, we can equate the equations:

(4/3) * π * [tex]r^3}[/tex] = Vex/molecule

Now, rearrange the equation to solve for the radius (r):

[tex]r^3 }[/tex]= (3 * Vex/molecule) / (4 * π)

r = (3 * Vex/molecule / (4 * π[tex]))^{1/3}[/tex]

Substituting the calculated value for Vex/molecule:

r = (3 * 1.655 x [tex]10^{-26}[/tex] L/molec / (4 * π)[tex])^{1/3}[/tex]

r ≈ 2.36 x 10^(-10) meters

Therefore, the estimated radius of a neon atom is approximately 2.36 x [tex]10^{-10}[/tex] meters.

For more details of estimated radius:

https://brainly.com/question/22742317

#SPJ4

The three lnorganic binders are portland cement, Silica sol,  Sodium silicate.

Here are three examples of inorganic binders along with their approximate calcination temperatures:

1. Portland cement: Portland cement is a commonly used inorganic binder in construction. It is made by heating limestone and clay at temperatures of around 1450°C (2642°F). This process is called calcination. The resulting product is then ground into a fine powder and mixed with water to form a paste that hardens over time.

2. Silica sol: Silica sol is an inorganic binder used in the production of ceramics and foundry molds. It is made by dispersing colloidal silica particles in water. The binder is then applied to the desired surface and heated at temperatures ranging from 400°C to 900°C (752°F to 1652°F) for calcination. This process fuses the silica particles together, forming a solid bond.

3. Sodium silicate: Sodium silicate, also known as water glass, is an inorganic binder used in various industries. It is produced by fusing sodium carbonate and silica sand at temperatures around 1000°C (1832°F). The resulting liquid is then cooled and dissolved in water to form a viscous solution. When this solution is exposed to carbon dioxide, it undergoes calcination and hardens into a solid.

These are just three examples of inorganic binders, each with its own calcination temperature.

learn more about inorganic from given link

https://brainly.com/question/27265107

#SPJ11

The bearing capacity of the soil at a depth of 6ft below the bottom of the corner of the foundation is option B) 120

Given that the size of a square foot with th of 3 feet is placed on the ground surface.

The structural loads are expected to be approximately 9 lips.

Uutes and we are required to find A (psf) at a depth equal to 6 ft below the bottom of the corner of the foundation.Therefore, we have to determine the weight of soil above a 6 ft by 6 ft column of soil underneath the foundation. We can use the following formula for this purpose:

A = W / (L × W)

where A is the bearing capacity of the soil in psf,

W is the weight of soil above the 6 ft by 6 ft column of soil underneath the foundation in pounds,

and L is the length of the column (6 ft).

W = V × γ

where V is the volume of soil in the 6 ft by 6 ft column underneath the foundation

(6 ft × 6 ft × 6 ft) and γ is the unit weight of soil (given as 120 pcf).

W = 6 ft × 6 ft × 6 ft × 120

pcf = 259,200 pounds

A = W / (L × W) = 259,200 pounds / (6 ft × 6 ft) = 1,200 psf

Now, we have determined the bearing capacity of the soil at 0 ft depth (i.e., the surface).

The bearing capacity at 6 ft below the surface is given by:

Qu = qNc + 0.5γBNq + 0.5γDNγ

where q, Nc, B, Nq, and D are determined from soil tests.

Since these values are not provided, we can make use of the Terzaghi and Peck (1948) bearing capacity factors to estimate the value of

Qu/qa:Qu/qa = 2.44 × (Df / B) × Nc + 0.67 × Nq + 1.33 × (Df / B) × B/Df × Nγ

where Df is the depth of the foundation (i.e., 6 ft), and B is the width of the foundation (i.e., 6 ft).Nc, Nq, and Nγ are bearing capacity factors that are determined from soil tests.

If we assume that the soil is medium-dense sand (a common type of soil), we can use the following values for these factors:

Nc = 35, Nq = 20, Nγ = 16

Substituting these values in the formula, we get:

Qu/qa = 2.44 × (6 ft / 6 ft) × 35 + 0.67 × 20 + 1.33 × (6 ft / 6 ft) × 16

= 167 psf

Therefore, the correct option is (b) 120.

To know more about capacity visit :

brainly.com/question/33301627

#SPJ11

Jessica received 21 phone calls on the first evening, 29 phone calls on the second evening, and 84 phone calls on the third evening.

Let's solve this problem step by step. Let's assume the number of phone calls Jessica received on the first evening is x.

According to the given information, we know that:

On the second evening, Jessica received 8 more calls than the first evening. Therefore, the number of calls on the second evening is x + 8.

On the third evening, Jessica received 4 times as many phone calls as the first evening. Therefore, the number of calls on the third evening is 4x.

Now, let's add up the total number of calls Jessica received over the three evenings:

x + (x + 8) + 4x = 134

Combining like terms, we get:

6x + 8 = 134

Subtracting 8 from both sides, we have:

6x = 126

Dividing both sides by 6, we get:

x = 21

So, Jessica received 21 phone calls on the first evening.

To find the number of calls on the second evening:

x + 8 = 21 + 8 = 29

And the number of calls on the third evening:

4x = 4 * 21 = 84

Therefore, Jessica received 21 phone calls on the first evening, 29 phone calls on the second evening, and 84 phone calls on the third evening.

For more questions on information, click on:

https://brainly.com/question/27847789

#SPJ8

Recovery factor (RF) = 85% (or 0.85) the oil and gas industry indicate a market structure where a small number of dominant players control the market, leading to limited competition and significant interdependence among them.

The Gas Initially in Place (GIIP) and the recoverable gas reserves, we need to use the following formulas:

GIIP = (A × h × Φ × (1 - Sw) × N) / (Bgi × Bg)

Recoverable Gas Reserves = GIIP × RF

Where:

A = Drainage area (in acres)

h = Formation thickness (in feet)

Φ = Porosity

Sw = Water saturation

N = Formation volume factor

Bgi = Initial gas formation volume factor

Bg = Gas formation volume factor at standard conditions

RF = Recovery factor

Given the provided data:

Drainage area (A) = 160 acres

Formation thickness (h) = 28 feet

Porosity (Φ) = 15% (or 0.15)

Water saturation (Sw) = 22% (or 0.22)

Formation volume factor (N) = 259.89 SCF/CF

Initial gas formation volume factor (Bgi) = Not given

Gas formation volume factor at standard conditions (Bg) = Not given

Recovery factor (RF) = 85% (or 0.85)

The different categories of crude oil according to API gravity are as follows:

Light Crude Oil: API gravity greater than 31.1 degrees.

Medium Crude Oil: API gravity between 22.3 and 31.1 degrees.

Heavy Crude Oil: API gravity less than 22.3 degrees.

Extra Heavy Crude Oil: API gravity less than 10 degrees.

Now, let's discuss the role of OPEC (Organization of the Petroleum Exporting Countries) in the oil and gas market:

OPEC is an intergovernmental organization consisting of major oil-producing countries. Its main role is to coordinate and unify the petroleum policies of its member countries to ensure stable oil markets and secure fair prices for both producers and consumers. OPEC aims to maintain a balance between the interests of oil-producing nations and the stability of global oil supplies.

Some of the key roles and responsibilities of OPEC include:

Production Control: OPEC member countries collectively decide on production levels to manage global oil supply and maintain stability in prices.

Price Regulation: OPEC aims to stabilize oil prices by adjusting production levels to meet market demand and avoid significant price fluctuations.

Market Monitoring: OPEC monitors global oil markets, assesses supply and demand factors, and provides market analysis and forecasts to its member countries.

Policy Coordination: OPEC facilitates cooperation among member countries to develop and implement petroleum policies that benefit all participating nations.

Negotiating with Consumers: OPEC engages in discussions and negotiations with major oil-consuming countries to establish mutually beneficial agreements and ensure a steady flow of oil.

Finally, let's address your question about why the oil and gas industry structure is classified as an oligopoly:

The oil and gas industry is classified as an oligopoly due to the following characteristics:

Few Dominant Players: The industry is primarily dominated by a small number of large companies known as "supermajors." These companies possess significant market share and influence over prices and production levels.

High Barrier to Entry: The capital-intensive nature of the industry, including exploration, drilling, and infrastructure development, creates significant barriers for new entrants. This contributes to limited competition.

Interdependence: The major oil and gas companies closely observe and react to each other's actions regarding production levels, pricing strategies, and market behavior. Their decisions have a substantial impact on the overall market dynamics.

Price Leadership: Changes in oil and gas prices are often initiated by a few key players, which other companies tend to follow. This price leadership behavior indicates a concentrated market structure.

Resource Control: The control and ownership of oil and gas reserves are concentrated in the hands of a few companies and countries. This control allows them to exert considerable influence over global supply and demand dynamics.

These characteristics of the oil and gas industry indicate a market structure where a small number of dominant players control the market, leading to limited competition and significant interdependence among them.

To know more about Recovery factor click here :

https://brainly.com/question/14897032

#SPJ4

We cannot graph the equation y = 6 - 8/x as a linear function.

The equation 2/x + y/4 = 3/2 is not a linear equation because it contains variables in the denominator and the terms involving x and y are not of the first degree.

Linear equations are equations where the variables have a maximum degree of 1 and there are no terms with variables in the denominator.

To graph the equation, we can rearrange it into a linear form.

Let's start by isolating y:

2/x + y/4 = 3/2

Multiply both sides of the equation by 4 to eliminate the fraction:

(2/x) [tex]\times[/tex] 4 + (y/4) [tex]\times[/tex] 4 = (3/2) [tex]\times[/tex] 4

Simplifying, we have:

8/x + y = 6

Now, subtract 8/x from both sides of the equation:

y = 6 - 8/x

The equation y = 6 - 8/x is not a linear equation because of the term 8/x, which involves a variable in the denominator.

This makes the equation non-linear.

Since the equation is not linear, we cannot graph it on a Cartesian plane as we would with linear equations.

Non-linear equations often result in curves or other non-linear shapes when graphed.

For similar question on linear function.

https://brainly.com/question/2248255

#SPJ8

Hence, the solution of the given differential equation is y = -∫(cos(x) dx) + C(x)y = -sin(x) + C(x)

The given differential equation is 2ycos(x) dx + 6dy = 0.

Here, we have to determine the linearity (linear or non-linear), the order, homogeneity (homogeneous or non-homogeneous), and autonomy (autonomous or non-autonomous) of the differential equation.

The differential equation is of the form M(x, y) dx + N(x, y) dy = 0. It is linear if M and N are linear functions of x and y. Let's find out:

M(x, y) = 2ycos(x) and N(x, y) = 6dyHere, both M(x, y) and N(x, y) are linear functions of x and y.

Therefore, the given differential equation is linear.

The order of the differential equation is determined by the highest derivative. But, there is no derivative given here. Therefore, we can consider it as first-order.

The differential equation is homogeneous if M(x, y) and N(x, y) are homogeneous functions of the same degree.

Let's check:

M(x, y) = 2ycos(x)N(x, y) = 6dyHere, both M(x, y) and N(x, y) are not homogeneous functions of the same degree. Therefore, the given differential equation is non-homogeneous.

The differential equation is autonomous if M and N do not explicitly depend on x.

But, here M(x, y) = 2ycos(x) which explicitly depends on x.

Therefore, the given differential equation is non-autonomous.

Solving the differential equation:2ycos(x) dx + 6dy = 0

Multiplying throughout by 1/6, we get:

(ycos(x) dx) + (dy) = 0

Now, integrating both sides, we get:

∫(ycos(x) dx) + ∫(dy) = C

∫(ycos(x) dx) = -∫(dy) + C

∫ycos(x) dx = -y + C(x)

Hence, the solution of the given differential equation is y = -∫(cos(x) dx) + C(x)y = -sin(x) + C(x)

To know more about differential equation visit:

https://brainly.com/question/33433874

#SPJ11

To synthesize (1R,4S)-1,4,4a,5,6,7,8,8a-octahydro-1,4-ethanonaphthalene from cyclohexane, Here's one possible synthesis route : Conversion of cyclohexane to cyclohexanone, Conversion of cyclohexanone to cyclohexenone, Catalytic hydrogenation of cyclohexenone.

1:Conversion of cyclohexane to cyclohexanone

Cyclohexane can be oxidized to cyclohexanone using a suitable oxidizing agent such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). This  reaction introduces a ketone group into the cyclohexane ring.

2: Conversion of cyclohexanone to cyclohexenone

Cyclohexanone can undergo an elimination reaction using a base such as potassium tert-butoxide (KOt-Bu) to form cyclohexenone. This reaction eliminates a molecule of water from the ketone, resulting in the formation of a double bond.

3: Catalytic hydrogenation of cyclohexenone

Cyclohexenone can be selectively hydrogenated using a suitable catalyst such as palladium on carbon (Pd/C) or platinum (Pt) to yield cyclohexanol. This hydrogenation reaction reduces the double bond and converts it into a saturated alcohol group.

Step 4: Conversion of cyclohexanol to the target compound

Cyclohexanol can be further transformed into the desired (1R,4S)-1,4,4a,5,6,7,8,8a-octahydro-1,4-ethanonaphthalene through a series of reactions. Here's one possible route:

a. Dehydration: Cyclohexanol is dehydrated using a strong acid catalyst, such as sulfuric acid (H2SO4), to form cyclohexene.

b. Epoxidation: Cyclohexene can be converted to cyclohexene oxide (cyclohexene epoxide) using a peracid, such as peroxyacetic acid (CH3CO3H).

c. Ring opening: Cyclohexene oxide undergoes ring opening by reaction with a nucleophile, such as methanol (CH3OH), to form a diol intermediate.

d. Dehydration: The diol intermediate is dehydrated using a strong acid catalyst, such as sulfuric acid (H2SO4), to eliminate water and form the target compound, (1R,4S)-1,4,4a,5,6,7,8,8a-octahydro-1,4-ethanonaphthalene.

learn more about reagents

https://brainly.com/question/28463799

#SPJ11

Answer:

x = 5

Step-by-step explanation:

Given equation,

→ 2(x + 5) - 4 = 16

Now we have to,

→ Find the required value of x.

Then the value of x will be,

→ 2(x + 5) - 4 = 16

Applying Distributive property:

→ 2(x) + 2(5) - 4 = 16

→ 2x + 10 - 4 = 16

→ 2x + 6 = 16

Subtracting the RHS with 6:

→ 2x = 16 - 6

→ 2x = 10

Dividing RHS with number 2:

→ x = 10/2

→ [ x = 5 ]

Hence, the value of x is 5.

At STP, 9g of diborane (B2H6) occupies approximately 4.48 liters. At 10°C and a pressure of 0.55 atm, the volume it occupies can be calculated using the ideal gas law.

To find the volume of diborane (B2H6) at STP, we can use the molar mass of diborane (B2H6), which is approximately 27.67 g/mol. First, we need to convert the mass of 9g into moles by dividing it by the molar mass:

9g / 27.67 g/mol = 0.325 mol

Next, we can use the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

At STP, the pressure is 1 atm and the temperature is 273 K. Plugging these values into the ideal gas law equation:

(1 atm) * V = (0.325 mol) * (0.0821 L·atm/(mol·K)) * (273 K)

Simplifying the equation:

V = (0.325 mol) * (0.0821 L·atm/(mol·K)) * (273 K) / (1 atm)
V ≈ 4.48 L

Therefore, at STP, 9g of diborane (B2H6) occupies approximately 4.48 liters.

To find the volume at 10°C and a pressure of 0.55 atm, we can use the same ideal gas law equation, but this time we need to convert the temperature from Celsius to Kelvin.

10°C + 273 = 283 K

Plugging in the new temperature and the given pressure value:

(0.55 atm) * V = (0.325 mol) * (0.0821 L·atm/(mol·K)) * (283 K)

Simplifying the equation:

V = (0.325 mol) * (0.0821 L·atm/(mol·K)) * (283 K) / (0.55 atm)
V ≈ 13.1 L

Therefore, at 10°C and a pressure of 0.55 atm, 9g of diborane (B2H6) occupies approximately 13.1 liters.

Know more about ideal gas law here:

https://brainly.com/question/30458409

#SPJ11

We have shown that 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2 holds for all n > 0.To prove by induction that for all integers n ≥ 2, 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2 - 1/n, we will follow these steps:

1. Base case:
  - For n = 2, we have 1 + 1/22 = 1 + 1/4 = 5/4 < 2 - 1/2 = 3/2. This is true.
 
2. Inductive hypothesis:
  - Assume that for some k ≥ 2, 1 + 1/22 + 1/32 + ⋯ + 1/k2 < 2 - 1/k.
 
3. Inductive step:
  - We need to prove that 1 + 1/22 + 1/32 + ⋯ + 1/k2 + 1/(k+1)2 < 2 - 1/(k+1).
  - Adding 1/(k+1)2 to both sides of the inequality in the hypothesis, we have:
    1 + 1/22 + 1/32 + ⋯ + 1/k2 + 1/(k+1)2 < 2 - 1/k + 1/(k+1)2.
  - Simplifying the right side, we have:
    2 - 1/k + 1/(k+1)2 = 2 - (1/k - 1/(k+1)2).
  - To prove our statement, we need to show that (1/k - 1/(k+1)2) > 0.
  - Expanding (1/k - 1/(k+1)2), we get:
    1/k - 1/(k+1)2 = [(k+1)2 - k]/[k(k+1)2].
  - Simplifying, we have:
    [(k+1)2 - k]/[k(k+1)2] = [k2 + 2k + 1 - k]/[k(k+1)2] = (k2 + k + 1)/[k(k+1)2].
  - Since k ≥ 2, we have k(k+1)2 > 0. Thus, (k2 + k + 1)/[k(k+1)2] > 0.
  - Therefore, 1 + 1/22 + 1/32 + ⋯ + 1/k2 + 1/(k+1)2 < 2 - (1/k - 1/(k+1)2) = 2 - 0 = 2.

By using the principle of mathematical induction, we have proved that for all integers n ≥ 2, 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2 - 1/n.

To prove that 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2 holds for all n > 0, we can use the result we just proved by induction.

For n = 1, we have 1 < 2, which is true.

For n ≥ 2, we know that 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2 - 1/n. Since 2 - 1/n > 1, we can conclude that 1 + 1/22 + 1/32 + ⋯ + 1/n2 < 2.

To know more about statement visit:

https://brainly.com/question/32562440

#SPJ11

The given equation is 14 + 6T = 30 - 16x. So, to achieve the solution as: Step 1: Distribute -2 to 5x and 8. Step 2: Simplify the right side. Step 3: Simplify the left side by combining like terms. Step 4: Divide both sides by 6.

To solve the given equation, we need to follow the steps given below:

Step 1: Distribute -2 to 5x and 8.14 + 6T = 30 - 16x [Given] 14 + 6T = -2(5x - 4) + 30 [Distributing -2 to 5x and 8]

Step 2: Simplify the right side. 14 + 6T = -10x + 22 + 30 [Adding -2(5x - 4) to 30]14 + 6T = -10x + 52

Step 3: Simplify the left side by combining like terms.6T + 14 = -10x + 526T = -10x + 38

Step 4: Divide both sides by 6. Taking 6T = -10x + 38To find the value of x or T, divide both sides by 6. This gives us the value of T. Taking 6T = -10x + 38T = (-10x + 38)/6

Thus, we obtained the process/steps used to achieve the solution as:

Step 1: Distribute -2 to 5x and 8.

Step 2: Simplify the right side.

Step 3: Simplify the left side by combining like terms.

Step 4: Divide both sides by 6.

For more questions on: equation

https://brainly.com/question/29797709

#SPJ8    

Hello!

x + 3 = y²  ☑

y = x² - 3 ☑

x + y = 3²

y = x + 3² ☑

Answer:

x + 3 = y^2

Step-by-step explanation:

x + 3 = y^2 is not a fnction

The graph of this is a parabola which opens to the rigth so it fails the vertical line test.  ( a vertical line can be drawn to pass throgh 2 points on the graph)

Answer:

Answer: K-2

Step-by-step explanation:

If you think about it’s pretty simple just find the key hints.