Select the correct answer. given: sno2 2h2 → sn 2h2o tin oxide reacts with hydrogen to produce tin and water. how many moles of sno2 are needed to produce 500.0 grams of sn?
a. 1.57
b. 4.21
c. 634.8
d. 59,350

Answer:

unbalanced

Explanation:

as the atoms on the one side do not equal to the atoms on the other sides

An exceptionally potent type of dipole-dipole interaction is hydrogen bonding. Oil and water are examples of the effects of hydrogen bonding.

Hydrogen bonding are a type of dipole-dipole interaction that occur between the hydrogen atoms of one molecule and the nitrogen or oxygen atoms of another molecule. They are relatively strong interactions, about 5-10% as strong as a covalent bond, and are responsible for the unique properties of many biological molecules, such as DNA and proteins. Oil and water are examples of substances that demonstrate the effects of hydrogen bonding. Water molecules are polar, meaning that they have a partial positive charge on the hydrogen atoms and a partial negative charge on the oxygen atoms. This polarity allows water molecules to form hydrogen bonds with one another, giving water its high surface tension and making it a good solvent for polar substances. Oil, on the other hand, is composed of non-polar molecules such as alkanes and alkenes, which do not form hydrogen bonds with one another. As a result, oil is immiscible with water and will float on top of it, because it does not have the same kind of attractive forces between its molecules as water does, and also the oil molecules have a low polarity. In summary, hydrogen bonds are a type of dipole-dipole interaction that are relatively strong, and oil and water are examples of substances that demonstrate the effects of hydrogen bonding. Water molecules can form hydrogen bonds with one another, giving it the properties of high surface tension and making it a good solvent for polar substances, while oil is composed of non-polar molecules and it is immiscible with water, having low polarity.

To know more about hydrogen bonding please refer: https://brainly.com/question/4542860

#SPJ4

Answer:

It can be done by crystallization, filtration, and sublimation. The easiest method among the three is separation by sublimation. Ammonium chloride sublimes upon heating. Actually, the sublimation is a decomposition of ammonium chloride forming ammonia and hydrogen chloride

Explanation:

Answer:

[1] P4 + [3] O2=[2] P2O3

Explanation:

you can first solve for amount of O2 in the equation because reactant had O2 and product had O3, so the amount of O2 should be 3 and amount of O3 should be 2, which gets u to 6 moles of oxygen for both reactant and product.  then you can balance the P4, and 1 mols of P4 = 2 moles of P2, which matches with the amount of mols for O3 as well. therefore you can get P4 + 3O2 = 2P2O3

Yes, calcium oxide (CaO) reacts with carbon monoxide (CO) to form calcium carbonate (CaCO3) and oxygen gas (O2). The reaction can be represented by the following equation:

CaO + CO -> CaCO3 + O2

This reaction is an example of a chemical change, as it results in the formation of a new substance with different chemical properties. The reaction is also exothermic, meaning that it releases heat.

Calcium oxide is a white solid that is used in a variety of applications, including cement production and the purification of flue gases. Carbon monoxide is a colorless, odorless gas that is toxic to humans when inhaled. It is produced as a byproduct of the incomplete combustion of fossil fuels.

Hope This Helps You!

Answer:

Answers are in the explanation

Explanation:

Based on the reaction:

CF₄ + 2Br₂ → CBr₄ + 2F₂

The mole ratio of CF₄ is:

CF₄:Br₂ = 1:2

CF₄:CBr₄ = 1:1

CF₄:F₂ = 1:2

Moles F2:

Molar mass CF₄: 88.0g/mol

57.0g * (1mol / 88.0g) = 0.6477 moles CF₄ * (2mol F₂ / 1mol CBr₄) =

Mass Br2:

Molar mass CBr₄: 331.63g/mol

250.0g * (1mol / 331.63g) = 0.7539 moles CBr₄ * (2mol Br₂ / 1mol CF₄) =

1.51 moles Br₂ * (159.808g / mol) =

Moles F2:

4.8 moles CF₄ * (2mol F₂ / 1mol CF₄) =

There are 5,944 carbon atoms in 2.12 moles of propane, and 15,528 hydrogen atoms in 2.12 moles of propane.

What is carbon?

Carbon is an element that occurs in nature and is essential for life. It is the fourth most abundant element in the universe and is present in all living organisms. Carbon exists in many different forms, including graphite, diamond, amorphous carbon, and fullerenes. Carbon is a key component of organic molecules, which are the building blocks of life. Carbon also plays an important role in the global carbon cycle.

To learn more about carbon
https://brainly.com/question/26150306
#SPJ4

A molecule's core atom experiences sp orbital hybridization. Around this primary atom, the geometry of the electron domain is linear.

In chemistry, hybridization is the idea of combining two atomic orbitals to create a new class of hybridized orbitals. Usually, this mixing creates hybrid orbitals with completely distinct energies, forms, etc. In hybridization, the same energy-level atomic orbitals are primarily involved. However, assuming they contain equal energy, both fully-filled and half-filled orbitals can participate in this process.

When two atomic orbitals unite to generate a hybrid orbital in a molecule, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name given to this process. Atomic orbitals with similar points are brought together during the hybridization process.

Learn more about hybridization here:

https://brainly.com/question/29591951

#SPJ4

Answer: Uhmmmm this is what i got...-

Explanation:

It is a matter of fact that the hydrophobic (water-hating) oily compounds of cannabinoids such as CBD, THC and others are not water soluble. The term "water soluble" refers to materials which dissolve in water in a homogenous manner by becoming molecules or ions (such as sugar, alcohol, and salt).

Answer:

Chemical Change

Explanation:

Physical change and phase change are both changes in the matter's state. Such as solid, gas and liquid. Not what it's made of. So when a new substance is formed, it' a chemical change.

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. The other compounds listed are either bases, alkanes, or ethers and are not acidic when dissolved in water.

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. Acids are compounds that donate protons when dissolved in aqueous solutions, and sulfuric acid is one of the most common acids used in aqueous solutions. Other compounds listed, such as CH3OCH3, KOH, and CH4, are not acids when dissolved in water. CH3OCH3 is an ether, KOH is a base, and CH4 is an alkane. Acids will typically have a pH value less than 7, while bases have a pH greater than 7. H2SO3 is a strong acid with a pH value of around 1, making it the only compound listed that behaves as an acid when dissolved in water.

learn more about acid here

https://brainly.com/question/14072179

#SPJ4

Answer:

Solid.

Explanation:

Hello there!

In this case, according to the given description of the freezing and boiling point of oxygen, it turns out possible for us to figure out the phase of oxygen at 35 K by just subtracting 273:

[tex]35-273=-238\°C[/tex]

In such a way, since this temperature is lower than its freezing point of -219 °C, we infer that such sample will be solid.

Regards!

KI - Ionic compound,  KCl - Ionic compound,

C₆H₁₂O₆ - Covalent compound, KNO₃ - Ionic compound,

C₆H₄Cl₂ - Covalent compound, C₆H₅COOH - Covalent compound

CH₃COOH - Covalent compound, Parafin wax - Covalent

HCl - Covalent compound

Ionic compounds can be classified as compounds formed between cation ions and an anion. A cation can be described as an electropositive ion and has the tendency to donate valence electrons. Similarly, anions are electronegative ions and have a tendency to accept electrons.

In an ionic compound, an ionic bond contains the complete transfer of electrons, therefore, there exists an electrostatic force of attraction that forms a strong bond.

In a covalent compound, the covalent bond exhibits the mutual sharing of electrons. Shared pairs of electrons are hard to give away as nuclei of two chemical elements together share the electrons and produce a bond stronger.

Learn more about the ionic and covalent compound, here:

brainly.com/question/12144907

#SPJ1

The pressure in the container can be calculated using Ideal gas law. The pressure of the gas at the reduced temperature will be 0.17 atm.

Ideal gas law states the relation between volume, pressure, temperature and number of moles of a gas as written below:

PV = nRT.

Where R is the universal gas constant equal to 0.082 L atm/ K mol.

Given , T = 100 K

n = 0.13 moles

V = 6.1 L

Then, P = nRT/ V

The pressure of the gas at 100 K with 0.13 mole is calculated as follows:

P = (0.13 mole × 100 K × 0.082 L atm/ K mol) / 6.1 L = 0.17 atm.

Therefore, the pressure of the gas is 0.17 atm.

Find more on ideal gas law:

https://brainly.com/question/13821925

#SPJ1

The inland area has a Continental climate.

Inland climates are typically more severe. Summers might be quite hot, and winters could be very frigid. Rainfall can be scarce.

In inland area the water bodies take long time to heat up and cool down, so they absorb all the heat during the spring and summer when the sun is at its greatest before slowly losing it throughout the fall and winter when the temperature starts to drop.

On the other hand, it warms up and cools down far more quickly on land, that's why the  inland are more cooler.

Inland absorbs and releases heat energy more quickly than water, inland places typically experience higher temperature variations from day to night and from season to season, so that inland is hotter area also.

To know more about, Energy click here:

brainly.com/question/1932868

#SPJ4

Answer:

When Epsom salt (magnesium sulfate) dissolves, it separates into its ions: a magnesium ion (Mg2+) and a sulfate ion (SO4 2-), which results in hard water. When hard water and soap are mixed, the magnesium ion reacts with soap molecules and forms a solid material called a precipitate, which does not dissolve.

Explanation:

can i have brainlest

Answer:The pOH of the solution is 9.914

Explanation:

pH is given as the negative logarithm (base 10) of the hydronium ion concentration [H₃O⁺] that is

pH= - log [H₃O⁺]

Since we are given  [H₃O⁺]=8.2 x 10⁻⁵,

pH=- log (8.2 x 10⁻⁵)

pH= 4.086

The pOH gives s the measurement of the concentration of OH− ions, Hence,

pH + pOH= 14

from the above calculation, we got  pH=4.086

So

4.086 + pOH=14

pOH= 14 - 4.086

pOH= 9.914

The pOH of the solution is 9.914

Answer:

45594J

Explanation:

Needed information in this question are;

Specific heat of ice = 2.06 J/g°C

Specific heat of water = 4.18 J/g°C

Specific heat of steam = 2.03 J/g°C

Heat of fusion of water ΔHf = 334 J/g

Melting point of water = 0 °C

Heat of vaporization of water ΔHv = 2257 J/g

Boiling point of water = 100 °C

- STEP 1:

Q1 = mcΔT

where

m = 15 grams

c (specific heat of ice) = 2.06 J/g°C

Tinitial = -5 °C

Tfinal = 0 °C

ΔT = (Tfinal – Tinitial)

ΔT = (0 °C - (-5 °C))

ΔT = 5 °C

Q1 = mcΔT

Q1 = (15 g) · (2.06 J/g°C) · (5 °C)

Q1 = 154.5 J

- STEP 2:

Q2 = m · ΔHf

where

m = 15 grams

ΔHf (heat of fusion) = 334 J/g

Q2 = m · ΔHf

Q2 = 15 · 334 J/g

Q2 = 5010 J

- STEP 3:

Q3 = mcΔT

where

m = 200 grams

c (specific heat of water) = 4.18 J/g°C

Tinitial = 0 °C

Tfinal = 100 °C

ΔT = (Tfinal – Tinitial)

ΔT = (100 °C – 0 °C)

ΔT = 100 °C

Q3 = mcΔT

Q3 = (15 g) · (4.18 J/g°C) · (100 °C)

Q3 = 6270 J

- STEP 4:

Q4 = m · ΔHv

where

m = 15 grams

ΔHv (heat of vaporization) = 2257 J/g

Q4 = m · ΔHf

Q4 = 15 · 2257 J/g

Q4 = 33855 J

- STEP 5:

Q5 = mcΔT

where

m = 15 grams

c (specific heat of steam) = 2.03 J/g°C

Tinitial = 100 °C

Tfinal = 110 °C

ΔT = (Tfinal – Tinitial)

ΔT = (110 °C – 100 °C)

ΔT = 10 °C

Q5 = mcΔT

Q5 = (15 g) · (2.03 J/g°C) · (10 °C)

Q5 = 304.5 J

Total heat = 304.5J + 33855 J + 6270 J + 5010 J + 154.5 J

= 45594J

Answer: A

Explanation:

Cooling magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.

This answer was obtained from a credible source after doing some research.

The  temperature differences in the layers of Earth move magma as cooling  magma becomes more dense and sinks, while hotter magma near the core is less dense and rises, moving magma in a cyclic path.

Magma is the molten or semi-molten natural material from which all igneous rocks are formed.Magma is found beneath the surface of the Earth, and evidence of magmatism has also been discovered on other terrestrial planets and some natural satellites.Besides molten rock, magma may also contain suspended crystals and gas bubbles.

Magma is produced by melting of the mantle or the crust in various tectonic settings, which on Earth include subduction zones, continental rift zones,mid-ocean ridges and hotspots. Mantle and crustal melts migrate upwards through the crust where they are thought to be stored in magma chambers or trans-crustal crystal-rich mush zones. During magma's storage in the crust, its composition may be modified by fractional crystallization, contamination with crustal melts, magma mixing, and degassing.

Learn more about magma,here:

https://brainly.com/question/16940653

#SPJ2

I do not know, i just need points :/

one of the BEST actions the US government can take to slow global warming is invest in clean technologies such as wind and solar power

To learn more about global warming refers to:

brainly.com/question/26402403

#SPJ1

To determine the rate law for the reaction A + B -> products, we need to examine how the rate of the reaction changes as the concentrations of A and B change. From the given data, we can see that when the concentration of A is doubled, the rate of the reaction also doubles. Similarly, when the concentration of B is doubled, the rate of the reaction also doubles. This indicates that the rate of the reaction is directly proportional to the concentrations of both A and B.

Based on this information, the rate law for the reaction can be expressed as Rate = k[A]*[B], where k is the rate constant. The exponents x and y in the rate law represent the order of the reaction with respect to A and B, respectively. Since the rate of the reaction is directly proportional to the concentrations of both A and B, the exponents x and y would both be equal to 1.

Therefore, the values of x and y are C) x = 1 and y = 1.

Electrons stay in between the nuclei of the two hydrogen atoms because they are attracted to the positive charge of the nuclei.

Electrons are negatively charged species, so they are attracted towards the positive charge of a nucleus.

In hydrogen atom, when both the two hydrogen atoms get close to each other then the electrons of each atom will get attracted to both the nuclei. And if both the hydrogen atoms come close to each other they will repel each other.

The energy of the two hydrogen atoms becomes less when  they are together than when they are far apart.

Thus, the electrons tend to stay in between the nuclei of the two hydrogen atoms.

To know more about nuclei of two hydrogen atoms here

https://brainly.com/question/13570570

#SPJ4

Part-1 The instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.

Part-2 The instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.

The concentration change over a chosen time period is the average rate. When you take the measurements makes a difference. The instantaneous rate is the rate that exists at a specific time. The solution is found at that point by determining the slope of the tangent to the concentration vs. time curve.

Given chemical reaction,
SO₃(g) + NO(g) --------> NO₂​(g) + O₂​(g)

t =  0. 000s

instantaneous rate = 1.38×10⁻⁸ - 2.0×10⁻⁸/0.011 - 0.000

instantaneous rate = 1.8 ×10⁻⁷m/s

Therefore the instantaneous rate at 0.000s is 1.8 ×10⁻⁷m/s.

for t = 0.052s,

instantaneous rate = 1.2×10⁻⁸ - 1.6×10⁻⁸/0.102 - 0.027

instantaneous rate = 5.3×10⁻⁸m/s.

Therefore the instantaneous rate at 0.0s is 5.3×10⁻⁸m/s.

To know more about instantaneous rate visit:

https://brainly.com/question/28168147

#SPJ4

Answer:

The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]

Explanation:

Molarity, or molar concentration, is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species. It is defined as the number of moles of solute that are dissolved in a given volume.

Molarity is calculated as the quotient between the number of moles of solutes and the volume of the solution:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case:

Replacing:

[tex]Molarity=\frac{2.1 moles}{7.3 liters}[/tex]

Molarity= 0.29 [tex]\frac{moles}{liter}[/tex]

The molarity of the solution is 0.29 [tex]\frac{moles}{liter}[/tex]

Answer:

M = 0.29 M

Explanation:

We are given;

Number of moles of NaCl; n = 2.1 moles

Total volume of solution; V = 7.3 L

Formula for molarity is;

M = n/L

Thus;

M = 2.1/7.3

M = 0.2878 M

Approximating to 2 decimal places gives;

M = 0.29 M

Answer:

Stomata

Explanation:

Stomata are epithelial cell structures found in tree leaves and needles that help promote plant growth and exchange carbon dioxide and water with the surrounding environment.

Stomata are tiny holes in the epidermis of leaves.

Stomata allow for gaseous exchange as well (oxygen and carbon dioxide).

Answer:

I believe the answer is "increasing"

Answer:

the shielding of electrons.

Explanation:

The dialysis tube was placed in a solution with a higher concentration of solutes than the 97% water solution inside the tube.

Solution is a way of resolving a problem or addressing an issue. It often involves identifying the underlying cause of the issue and then coming up with a plan that can be implemented to address the problem. Solutions may involve simple steps, such as changing a behavior, or they may involve more complicated processes that require multiple steps, such as creating new policies or procedures. Solutions should be designed to be effective, sustainable, and measurable.

To learn more about Solution
https://brainly.com/question/25326161
#SPJ4

Photoautotroph has been derived from the combination of three words, photo -meaning "light", autos- meaning "self", and troph meaning "nutrition".

Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll. Origin of the word: photo- (light) + auto (self) + troph (nourishment). Autotrophs known as photoautotrophs generate complex chemical substances like proteins, lipids, and carbohydrates by absorbing light. Photosynthesis is the name given to this light-mediated process.

An energy-rich carbohydrate like glucose is produced by plants using carbon dioxide, inorganic salts, and water during a process called photosynthesis. As a byproduct, oxygen is also produced, other than glucose. Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll.

To know more about autotrophs, refer to the following link:

https://brainly.com/question/28623341

#SPJ4