Answer:
Can you arrange it? I don't understand
Which of the following distinguishing electron configurations is characteristi
of noble gases?
O nf14
Ond10
O npo
Ons2
Answer:
no.3 is your correct answer
A laboratory group measures an excess of a volatile liquid. They add this to an empty flask with a volume of 66 mL. They heat the sample to 86.9 degrees Celcius until all the liquid is vaporized. The pressure in the lab is 0.987 atm. If 0.287 grams of volatile liquid were left in the flask, what was the molar mass of the compound?
Answer:
130.159
Explanation:
P=0.987
V=66ml =66/1000=0.066 L
n/moles= ?
R=0.08206
T=86.9+273.15=360.5 K
Formula PV=RnT
n =PV/TR
n=(0.987 * 0.066)/(360.05 * 0.08206) = 0.002205
Now to obtain molar mass you divide grams by mol.
0.287/0.002205 = 130.159
if you were to engineer an everyday solution for conserving water which activity do you think would be the most impactful ?
A solution contains an unknown amount of dissolved magnesium. Addition of
0.0877 mol of Na2CO3 causes complete precipitation of all of the magnesium.
What mass of magnesium was dissolved in the solution?
Taking into account the reaction stoichiometry, 2.13 grams of magnesium was dissolved in the solution.
Reaction stoichiometryIn first place, the balanced reaction is:
Mg²⁺(aq) + Na₂CO₃(aq) → MgCO₃(s) + 2 Na⁺(aq)
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Mg²⁺: 1 mole Na₂CO₃: 1 moleMgCO₃: 1 moleNa⁺: 2 molesThe molar mass of the compounds is:
Mg²⁺: 24.3 g/moleNa₂CO₃: 106 g/moleMgCO₃: 84.3 g/moleNa⁺: 23 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Mg²⁺: 1 mole ×24.3 g/mole= 24.3 gramsNa₂CO₃: 1 mole ×106 g/mole= 106 gramsMgCO₃: 1 mole ×84.3 g/mole=84.3 gramsNa⁺: 2 moles ×23 g/mole= 46 gramsMass of magnesium dissolvedThe following rule of three can be applied: If by reaction stoichiometry 1 mole of Na₂CO₃ react with 24.3 grams of magnesium, 0.0877 moles of Na₂CO₃ react with how much mass of magnesium?
[tex]mass of magnesium=\frac{0.0877 moles of Na_{2}C O_{3}x24.3 grams of magnesium }{1 mole of Na_{2}C O_{3}}[/tex]
mass of magnesium= 2.13 grams
Finally, 2.13 grams of magnesium was dissolved in the solution.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
Listed below are the step equations for the reaction in which sulfur dioxide (SO2) and hydrogen disulfide (H2S) react to produce sulfur and water. Write the balanced target equation and use Hess’s law to calculate the ΔH of this reaction.
SO2 (g) → S (s) + O2 (g) ΔH = +300.1 kJ
H2 (g) + S (s) → H2S (g) ΔH = –19.5 kJ
H2 (g) + O2 (g) → H2O (g) ΔH = –290.1 kJ
Based on Hess law, the enthalpy change, ΔH of the reaction is +48.9 kJ.
What is the equation of the reaction?The equation of the reaction of sulfur dioxide (SO2) and hydrogen disulfide (H2S) to produce sulfur and water is given below:
[tex]SO_2 + 2H_2S \rightarrow 3S + 2H_2O[/tex]
The ΔH of the reaction is calculated from the summation of the ΔH of the intermediate reactions according to Hess law.
SO2 (g) → S (s) + O2 (g) ΔH1 = +300.1 kJ
H2 (g) + S (s) → H2S (g) ΔH2 = –19.5 kJ
2H2 (g) + O2 (g) → 2H2O (g) ΔH3 = –290.1 kJ
ΔH of the reaction = ΔH1 + 2(-ΔH2) + ΔH3
ΔH of the reaction = 300 + 2 × -(-19.5) + (-290.1)
ΔH of the reaction = +48.9 kJ
Therefore, the ΔH of the reaction is +48.9 kJ.
Learn more about Hess law at: https://brainly.com/question/9328637
Which of the following best describes the process of carbon dioxide
sequestration?
O A. Technologies reduce the amount of carbon dioxide consumed by
forests.
O B. Technologies capture carbon dioxide and inject it into rock
formations,
O C. Technologies reduce the amount of carbon dioxide produced by
factories.
O D. Technologies capture carbon dioxide and release it into the
atmosphere
Answer:
C. Technologies reduce the amount of carbon dioxide produced by
factories.
Explanation:
simply the answer is C. trust me, im very smart
Do the reactants or the product have greater potential energy
Answer:
the reactants have more potential energy than the products have. The extra energy is released to the surroundings.
what is the size of an atom when it generally decreases
Answer:
the size depends on where is moves across the periodic table.
You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?
A. Seal them in a glass container in an atmosphere of argon (Ar) gas.
B. Suspend them in a bromine (Br) solution inside a glass container.
C. Seal them in a container of soft alkali metal such as lithium (Li), in an atmosphere of hydrogen (H) gas.
D. Seal them in a container made of alkali earth metal, such as calcium (Ca).
Answer:
A. Seal them in a glass container in an atmosphere of argon (Ar) gas.
Because Argon is an inert/noble gas which do not react with other elements/radicals. Thus, best way to make two radicals/substance only react is to seal them in glass container consisting atmosphere of Argon (Ar)..
Note: I also dont know if it's correct answer.. Since I am just giving my logic.. I hope it will help you
- Regards Rishab...
Answer: C. Seal them in a glass container in an atmosphere of argon (Ar) gas.
Explanation: Founders Educere answer ;)
Silver chromate is sparingly soluble in aqueous solutions. The sp of Ag2CrO4 is 1.12×10−12.
What is the solubility (in mol/L) of silver chromate in 1.20 M potassium chromate aqueous solution?
What is the solubility (in mol/L) of silver chromate in 1.20 M silver nitrate aqueous solution?
What is the solubility (in mol/L) of silver chromate in pure water?
The solubility (in mol/L) of silver chromate in 1.20 M in potassium chromate, silver nitrate and in pure water is
X = 5.0*10^-7 MX'' = 8.333*10^-13 MX'''= 6.694*10^-5 MThis is further explained below
What is the solubility (in mol/L) of silver chromate in 1.20 M potassium chromate aqueous solution?Generally,The Chemical reaction is
Ag2CrO4 <----> 2 Ag+ + CrO42-
Ksp = [Ag+]^2[CrO42-]
1.12×10−12 = [Ag+]^2[CrO42-]
Hence
1.12×10−12.=(2X)^2*(1.2)
X = 5.0*10^-7 M
b)
1.12×10−12=(1.2)^2*(X)
1.12×10−12= 1.44 * 1(X)^1
X'' = 8.333*10^-13 M
In conclusion
1.12×10−12=(2X)^2*(s)
1.12×10−12= 4(X)^3
X'''= 6.694*10^-5 M
Read more about Chemical reaction
https://brainly.com/question/16416932
What is bee venom an example of?
O nucleic acid
O carbohydrate
O fat
O protein
Answer:
O protein
Explanation:
Bee venom (BV) is a complex mixture of proteins and contains proteins such as phospholipase and melittin, which have an effect on blood clotting and blood clots.
HGD
When a thermometer is suspended in an insulated thermos that contain a block of ice, the temperature recorded on the thermometer drops. Describe the direction of heat flow.
The heat flows from inside to the outside direction because of lowering of temperature inside the thermos.
How the temperature of ice drops?When a thermometer is suspended in an insulated thermos that contain a block of ice, the temperature recorded on the thermometer drops, the direction of heat flow is from inside to the outside the thermos. This is because of the insulating material in which the ice is kept and the lowering of the temperature.
So we can conclude that the heat flows from inside to the outside direction because of lowering of temperature inside the thermos.
Learn more about thermometer here: https://brainly.com/question/2339046
Calculate the Kelvin and Fahrenheit temperature equivalent to 37° Celsius.
Answer:
310.15 Kelvin. 98.6 Farenheit
Explanation:
To calcuate the celsius to Kelvin you add 273.15 to the celsius. To calculate the celsius to farenheit you do (°C × 9/5) + 32 = °F. For the example, (37°C × 9/5) + 32 = 98.6°F.
okay this is the only way to get my answers
Answer:
Your answer is Answer thank me later :) <3
Explanation:
what would be the mass of 4.640 x 10^21 particles of aluminum
One mole of aluminum contains 6.02 × 10²³ Al particles. One mole of Al weighs 27 g. Hence 4.60 × 10²¹ Al particles or 0.007 moles weighs 0.208 g.
What is one mole ?One mole of a substance is its amount containing 6.02 × 10²³ atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.
Similarly one mole of every compound contains 6.02 × 10²³ molecules. The mass of one mole of compound is called its molar mass. Similarly mass of one mole of an element is called its atomic mass.
Al is 13th element in periodic table. Al is a metal. One mole of Al contains 6.02 × 10²³ Al atoms . Hence number of moles of 4.60 × 10²¹ Al particles is:
4.60 × 10²¹/ 6.02 × 10²³ = 0.0077 .
atomic mass of Al = 27 g/mol.
Then mass of 0.0077 moles = 0.0077 × 27 = 0.208 g
Therefore, the mass of 4.60 × 10²¹ Al particles is 0.208 g.
Find more on Avogadro number:
http://brainly.com/question/11907018
#SPJ2
Watch this video: G...
G Cotton gin - Wikipe... Copy of SOL 2 and..
2 pts
IN
Question 1
Determine Pxe in a container that has the following gases and respective pressures:
Gas
Pressure (kPa)
Xenon
?
Helium
77.3
Nitrogen dioxide
52.0
TOTAL
248.8
From the total pressure of the gaseous mixture, the partial pressure of xenon is 119.5 kPa
What is partial pressure of a gas?The partial pressure of a gas is the pressure that gas exerts when it is part of a mixture of gases which did not chemically react together.
The sum of the partial pressure of each gas in the mixture gives the total pressure.
In the gaseous mixtures above:
Total pressure = 248.8 kPa
Partial pressure of xenon = Total pressure - (Sum of partial pressure of the other gases)
Partial pressure of xenon = 248.8 - (77.3 + 52.0)
Partial pressure of xenon = 119.5
Therefore, the partial pressure of xenon is 119.5 kPa.
Learn more about partial pressure at: https://brainly.com/question/14119417
Why is sodium chloride not considered a molecular compound? What kind of compound is it?
Answer:
Something like table salt (NaCl) is a compound because it is made from more than one kind of element (sodium and chlorine), but it is not a molecule because the bond that holds NaCl together is an ionic bond. If you like, you can say that sodium chloride is an ionic compound.
Explanation:
name this please, please pleas
Answer:
propyne
Explanation:
according to newtons second law of motion,what is force equal to?
Answer:
This isn't chemistry but the answer is Force = mass x acceleration
copper ii oxide and charcoal are black solids how would you distinguish between the two solid
Answer:Charcoal will burn. You may also be able to distinguish it by smell, since it's rarely purged of all its “burnt wood” residue. Copper oxide will dissolve in a strong acid, such as hydrochloric or sulphuric and form a blue solution
Explanation:
This adaptation allows the panda to perform which activity?
A
Grasping
B
Running
C
Scratching
D
Throwing
Answer:
A grasping :)
Explanation:
The panda uses the "thumb" to grab onto bamboo to eat! Without this, the panda would not be able to eat the bamboo!
Have an amazing day!!
Please rate and mark brainliest!!
Where would the points for 1-pentene be
expected to fall?
Calculate the molarity of a solution prepared by diluting 7.0 mL of 4.0 M solution to a volume of 30 mL. Select the correct answer below: 0.76 M 0.87 M 0.93 M 1.02 M
Answer:
0.93 M
Explanation:
Molarity = [tex]\frac{Moles}{Volume}[/tex]
4.0M = [tex]\frac{x}{0.007 L}[/tex]
4.0 M x 0.007 L = Moles = 0.028
Molarity = [tex]\frac{Moles}{Volume}[/tex]
Molarity = [tex]\frac{0.028 moles}{0.03 L}[/tex]
= 0.93 M
4.55 Classify the following redox reactions. (a) 2H2O2 ⟶ 2H2O + O2 (b) Mg + 2AgNO3 ⟶ Mg(NO3)2 + 2Ag (c) NH4NO2 ⟶ N2 + 2H2O (d) H2 + Br2 ⟶ 2HBr
The following redox reactions are classify as:
(a) 2H₂O₂ ⟶ 2H₂O + O₂: Disproportionation reaction (redox)
(b) Mg + 2AgNO₃ ⟶ Mg(NO₃)₂ + 2Ag: Single displacement reaction (redox)
(c) NH₄NO₂ ⟶ N₂ + 2H₂O: Decomposition reaction (redox)
(d) H₂ + Br₂ ⟶ 2HBr: Combination reaction (redox)
(a) 2H₂O₂ ⟶ 2H₂O + O₂
This reaction involves hydrogen peroxide (H₂O₂) breaking down into water (H₂O) and oxygen gas (O₂). The oxidation state of oxygen in hydrogen peroxide is -1, and in water, it is -2. Oxygen in oxygen gas has an oxidation state of 0. Therefore, oxygen is being reduced from -1 to 0. The oxidation state of hydrogen remains +1 in H₂O₂ and H₂O. Since one element (oxygen) is reduced and the other (hydrogen) remains unchanged, this is a disproportionation reaction (a type of redox reaction).
(b) Mg + 2AgNO₃ ⟶ Mg(NO₃)₂ + 2Ag
In this reaction, magnesium (Mg) reacts with silver nitrate (AgNO₃) to form magnesium nitrate (Mg(NO₃)₂) and silver (Ag). The oxidation state of magnesium changes from 0 to +2 in Mg(NO₃)₂, while the oxidation state of silver changes from +1 in AgNO₃ to 0 in Ag. This is a single displacement reaction (a type of redox reaction) because one element (magnesium) displaces another (silver) in the compound.
(c) NH₄NO₂ ⟶ N₂ + 2H₂O
This reaction involves ammonium nitrite (NH₄NO₂) decomposing into nitrogen gas (N₂) and water (H₂O). The oxidation state of nitrogen in NH₄NO₂ is +3, and in nitrogen gas (N₂), it is 0. The oxidation state of hydrogen changes from +1 in NH₄NO₂ to +1 in H₂O. Since nitrogen is being reduced from +3 to 0, and hydrogen remains unchanged, this is a decomposition redox reaction.
(d) H₂ + Br₂ ⟶ 2HBr
In this reaction, hydrogen gas (H₂) reacts with bromine gas (Br₂) to form hydrogen bromide (HBr). The oxidation state of hydrogen changes from 0 in H₂ to +1 in HBr, while the oxidation state of bromine changes from 0 in Br₂ to -1 in HBr. This is a combination reaction (a type of redox reaction) because two elements (hydrogen and bromine) combine to form a compound (hydrogen bromide), and their oxidation states change during the reaction.
To know more about redox reactions here
https://brainly.com/question/28300253
#SPJ2
Florida and the eastern border of South Carolina share a regional landform characterized by flat land and low elevation. Identify the landform shared by both states.
Karst
Keys
Coastline
Plateau
Answer: it is coastline.
Explanation: This anwser would only makw sense because of the low elevation and the flat land.
The landform shared by Florida and the eastern border of South Carolina is the coastline. Option C is the correct answer.
Both states are located along the Atlantic Ocean and have a similar geographical feature characterized by flat land and low elevation along their eastern borders. Option C is the correct answer.
The coastline refers to the area where the land meets the sea. It is typically marked by sandy beaches, coastal marshes, and barrier islands. In the case of Florida and the eastern border of South Carolina, this coastline is known for its relatively flat terrain and low elevation, which makes it susceptible to flooding and storm surge during hurricanes. The coastline plays a significant role in the economies and ecosystems of both states. It attracts tourism and provides opportunities for recreational activities such as beachgoing, fishing, and boating. It is also a vital habitat for various marine and coastal species, including birds, turtles, and marine mammals.
Learn more about Coastline here:
https://brainly.com/question/31942406
#SPJ3
The complete question is, "Florida and the eastern border of South Carolina share a regional landform characterized by flat land and low elevation. Identify the landform shared by both states.
a. Karst
b. Keys
c. Coastline
d. Plateau"
A 0.250 mol sample of gas at 35.0°C exerts a pressure of 700 torr in it's container. What pressure will the container exert if the volume expands to 10.0L and the temperature is cooled to 5.0°C?
what is mass ? give two examples
mass it the amount of matter present in any object or body. Everything we see around us has mass. For example, a table, a chair, your bed, a football, a glass, and even air has mass.
A graphic designer has the choice to download design software on her computer and then design a logo or to use an online
version of the software to design the logo. Identify one advantage and one disadvantage of using the online software to design
the logo 2 points)
An online version is the availability of the application on the web and the internet. The online version of the logo designer is advantageous as it provides more customization choices.
What is logo designing?A logo design is a method to create logos that represent the brand of the business corporation or any other organization, it represents the company and brand.
Online software for logo designing provides more choices for customization as more fonts, styles, graphics, colors, and effects are present in online software.
The use of online software can be disadvantageous as it can be copied. The same tool and online data can be used to create the same logo and can be harmful to the company.
Therefore, using online software for logo designing can be both advantageous and disadvantageous.
Learn more about logo designing here:
https://brainly.com/question/1493739
#SPJ1
Answer:
Explanation:first one
Covalent bonding involves the sharing of electrons to create a full valence shell, and
occurs between nonmetals.
True
False
pls pls help me with this
Answer:
1. lava
2. caldera
3. true
4. true
5. before