Please help!! Will be appreciated tysm!!

Please Help!! Will Be Appreciated Tysm!!

Answers

Answer 1

a. f(5) ≈ 65.51311211. This means that in the fifth month (May), the estimated temperature in Hotville is approximately 65.51 degrees Fahrenheit based on the given model.

b. The maximum temperature of Hotville is 95 degrees Fahrenheit.

a. To find f(5), we substitute t = 5 into the given equation:

f(5) = -15 cos (π/12 * 5) + 80

Evaluating the cosine term:

cos (π/12 * 5) ≈ 0.965925826

Substituting the value:

f(5) = -15 * 0.965925826 + 80 ≈ -14.48688789 + 80 ≈ 65.51311211

Therefore, f(5) ≈ 65.51311211.

In the context of this problem, f(5) represents the temperature in Hotville in the fifth month, which corresponds to May. The value 65.51311211 is the estimated temperature in degrees Fahrenheit for May. It indicates the expected temperature in Hotville during that month based on the given mathematical model.

b. The maximum temperature of Hotville can be determined by analyzing the given equation. The temperature function f(t) is modeled by -15 cos (π/12 t) + 80, where t represents the time in months.

The cosine function oscillates between -1 and 1, and when multiplied by -15, it ranges from -15 to 15. Adding 80 to this range shifts the values upward, resulting in a range of 65 to 95.

Therefore, the maximum temperature of Hotville is 95 degrees Fahrenheit. This value represents the highest expected temperature based on the given model, and it occurs at a specific month determined by the phase of the cosine function.

for such more question on temperature

https://brainly.com/question/14820864

#SPJ8


Related Questions

Determine whether the sequence converges or diverges. an = n²e-5n lim an = n→[infinity] Need Help? Read It

Answers

The sequence given by an = n²e^(-5n) is a product of two terms, n² and e^(-5n). To determine whether the sequence converges or diverges, we need to evaluate the limit of the sequence as n approaches infinity. By applying the limit rules, we can simplify the expression and determine the behavior of the sequence.

To evaluate the limit of the sequence as n approaches infinity, we can rewrite the expression as an = n²e^(-5n) = n² / e^(5n). As n approaches infinity, the exponential term e^(5n) grows much faster than the polynomial term n². This is because the exponential function grows exponentially, while the polynomial function grows only as a power of n. Therefore, as n gets larger, the denominator e^(5n) dominates the numerator n², causing the sequence to approach zero.

In mathematical terms, we can express this by taking the limit as n approaches infinity: lim(n→∞) n² / e^(5n) = 0. This means that the sequence an = n²e^(-5n) converges to zero as n goes to infinity.

Learn more about limit here : brainly.com/question/12211820

#SPJ11

The sequence given by an = n²e^(-5n) is a product of two terms, n² and e^(-5n). The sequence an = n²e^(-5n) converges to zero as n goes to infinity.

To determine whether the sequence converges or diverges, we need to evaluate the limit of the sequence as n approaches infinity. By applying the limit rules, we can simplify the expression and determine the behavior of the sequence.

To evaluate the limit of the sequence as n approaches infinity, we can rewrite the expression as an = n²e^(-5n) = n² / e^(5n). As n approaches infinity, the exponential term e^(5n) grows much faster than the polynomial term n². This is because the exponential function grows exponentially, while the polynomial function grows only as a power of n. Therefore, as n gets larger, the denominator e^(5n) dominates the numerator n², causing the sequence to approach zero.

In mathematical terms, we can express this by taking the limit as n approaches infinity: lim(n→∞) n² / e^(5n) = 0. This means that the sequence an = n²e^(-5n) converges to zero as n goes to infinity.

Learn more about limit here : brainly.com/question/12211820

#SPJ11

The positive square root of 0. 1445 by division method

Answers

The positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).

To find the positive square root of 0.1445 by division method, we can follow these steps:

Step 1: Add a decimal point after the first digit to make it 0.14. Step 2: Pair the digits from the decimal point in pairs starting from the decimal point and moving left. If there is an odd number of digits, pair the leftmost digit with a zero. So, we have: 0. 14 45 Step 3: Find the largest number whose square is less than or equal to 14. Write this number on top of the paired digits and subtract its square from 14. The largest number whose square is less than or equal to 14 is 3. 3 | 0.14 45 9

5 14 4 89

255

Step 4: Bring down the next pair of digits (45) and double the quotient (3) to get the dividend for the next step. So, we have: 3 | 0.14 45 9

5 14 4 89

255

249

---

  66

Step 5: Find the largest digit d such that 6d multiplied by d is less than or equal to 66. Write this digit on top of the remainder (66) to get the next digit of the square root.

The largest digit d such that 6d multiplied by d is less than or equal to 66 is 7.

So, we have:

3 | 0.14 45

9  4

5 14 66 4 89

255

249

---

  66

  63

  --

   3

Step 6: Repeat steps 4 and 5 until you have found the desired number of decimal places. In this case, we stop here since we only need to find the square root correct to two decimal places.

Therefore, the positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).

Learn more about   square root from

https://brainly.com/question/428672

#SPJ11

The hydration of this molecule above would lead to two molecules. Which would be the major species? pentane pentan-1-ol pentan-2-ol pentan-1,2-diol propanoic acid and ethanol with heat and an acid catalyst will yield a ether ester amide amine

Answers

Hydration is the addition of water to an alkene or alkyne in the presence of a catalyst such as a mineral acid like sulfuric acid. This reaction is a reversible reaction, and in this case, it is an addition reaction. The hydration of pent-1-ene would produce two products pentan-1-ol and pentan-2-ol. Pentan-1-ol would be the major species.

Below is an explanation:The molecule pent-1-ene is an unsaturated hydrocarbon that has a double bond between the first and second carbon atom, as shown in the figure below.When pent-1-ene is hydrated in the presence of an acid catalyst and water, it would produce two molecules, pentan-1-ol, and pentan-2-ol. The reaction would proceed as shown below:The reaction is reversible; hence it can go forward or backward.

However, the forward reaction is more favored than the backward reaction. The major species that would be produced in this reaction is pentan-1-ol.The reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst would lead to the formation of an ester.

The reaction between the two compounds is shown below:Thus, the major product of the reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst is an ester.

For more information on Hydration  visit:

brainly.com/question/30373695

#SPJ11

1.35 mol sample of methane gas at a temperature of 25.0°C is found to occupy a volume of 29.7 liters. The pressure of this gas sample is ________mmHg.

Answers

The pressure of the methane gas sample at a temperature of 25.0°C and a volume of 29.7 liters is approximately 1410.4 mmHg.

To calculate the pressure of a methane gas sample, we can use the ideal gas law equation PV = nRT, where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the universal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.

Given:

Number of moles (n) = 1.35 mol

Volume (V) = 29.7 L

Temperature (T) = 25.0°C = 25.0 + 273.15 = 298.15 K

We can rearrange the ideal gas law equation to solve for pressure:

P = (nRT) / V

Substituting the given values:

P = (1.35 mol x 0.08206 L atm/mol K x 298.15 K) / 29.7 L

Calculating this expression gives:

P ≈ 1410.4 mmHg (rounded to one decimal place)

Learn more about temperature

https://brainly.com/question/7510619

#SPJ11

Which of the following observations is consistent with a zero order reaction?a. A graph of reactant concenration vs time is linear b. The half life of the reaction gets longer as concentration decreases c. A graph of inverse reactant concentration vs time is linear d.The half life of the reaction is independent of concentration

Answers

a). A graph of reactant concenration vs time is linear. is the correct option. The observation that is consistent with a zero-order reaction is "A graph of reactant concentration vs time is linear."

The zero-order reaction is a reaction where the rate of reaction is independent of the concentration of reactants, i.e., the reaction rate is constant. A zero-order reaction is characterized by a linear graph of concentration vs time. Here are the observations for each option: b.The half-life of the reaction gets longer as concentration decreases. This observation is consistent with the first-order reaction. c. A graph of inverse reactant concentration vs time is linear. 

This observation is consistent with the second-order reaction. d.The half-life of the reaction is independent of concentration. This observation is consistent with the zero-order reaction, however, it is not the observation that is specifically related to a zero-order reaction.

To know more about zero-order reaction visit:

brainly.com/question/13490912

#SPJ11

Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part A sliding door with weight F= 300 lb is mounted on a horizontal rail as shown in the figure. The coefficients of static friction between the rail and the door at A and Bare 0.15 and 0.25, respectively -5fB N 6 ft Determine the horizontal force that must be applied to the handle in order to move the door to the right. The horizontal force that must be applied to the handle is Ib(Click to select)

Answers

The horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.

To determine the horizontal force that must be applied to the handle in order to move the door to the right, we need to consider the forces acting on the door and the coefficients of static friction at points A and B.

Given:

Weight of the door (F) = 300 lb

Coefficient of static friction at point A (μA) = 0.15

Coefficient of static friction at point B (μB) = 0.25

Distance from point A to the handle (d) = 6 ft

Since the door is in equilibrium, the sum of the horizontal forces acting on the door must be zero. This means the applied force at the handle must overcome the frictional forces at points A and B.

The maximum frictional force at point A is given by:

F_frictionA = μA * F

Substituting the given values:

F_frictionA = 0.15 * 300 lb

F_frictionA = 45 lb

Similarly, the maximum frictional force at point B is given by:

F_frictionB = μB * F

Substituting the given values:

F_frictionB = 0.25 * 300 lb

F_frictionB = 75 lb

To move the door to the right, the applied force at the handle must overcome the frictional force at point A and the frictional force at point B. Therefore, the total horizontal force required is the sum of these two frictional forces:

Total horizontal force = F_frictionA + F_frictionB

Total horizontal force = 45 lb + 75 lb

Total horizontal force = 120 lb

Hence, the horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.

To know more about horizontal visit

https://brainly.com/question/29019854

#SPJ11

The slope of the tangent line to y=e^5x at x=5 is: m=0e^10 m=e^25 m=5e^5 m=5e^25

Answers

The slope of the tangent line to [tex]y = e^5x[/tex] at x = 5 is [tex]m = 5e^25.[/tex]

The slope of the tangent line to the function [tex]y = e^5x[/tex] at x = 5 can be found by taking the derivative of the function with respect to x and evaluating it at x = 5.

Let's start by finding the derivative of [tex]y = e^5x.[/tex]

The derivative of [tex]e^5x[/tex] with respect to x is [tex]5e^5x.[/tex]

This means that the slope of the tangent line to the function at any point is given by [tex]5e^5x[/tex].

Next, we want to find the slope of the tangent line at x = 5.

Plugging in x = 5 into [tex]5e^5x[/tex], we get [tex]5e^(5*5) = 5e^25.[/tex]

Therefore, the slope of the tangent line to [tex]y = e^5x[/tex] at x = 5 is [tex]m = 5e^25.[/tex]

In conclusion, the correct answer is m = [tex]5e^25[/tex].

Learn more about tangent line from this link:

https://brainly.com/question/31133853

#SPJ11

In a Cement Mortar mix or a Cement concrete mix, what type of admixtures can be used so that workability of mix increases and at the same time the strength properties are not decreased due to excessive water? Discuss how those admixtures work?

Answers

In a cement mortar mix or a cement concrete mix, plasticizers, water reducers, and superplasticizers can be used so that workability of the mix increases and at the same time the strength properties are not decreased due to excessive water.

These admixtures work in the following ways:

Plasticizers: These admixtures are organic substances that are used to reduce the water content in the mix without affecting the workability of the mix. Plasticizers are used in small quantities and reduce the surface tension of the water film, thus increasing the fluidity of the mix. Plasticizers also improve the cohesiveness of the mix and are ideal for use in mixes that require pumping. These admixtures improve the workability of the mix by reducing the friction between the particles of the mix.

Water reducers: These admixtures are inorganic substances that are used to reduce the amount of water required for a mix while maintaining the same workability. Water reducers work by reducing the surface tension of the water film, thus increasing the fluidity of the mix. Water reducers are used in larger quantities than plasticizers. These admixtures reduce the amount of water required for a mix, resulting in increased strength, improved durability, and decreased permeability.

Superplasticizers: These admixtures are organic substances that are used to improve the workability of a mix without increasing the water content. Superplasticizers are used in small quantities and are effective in increasing the fluidity of the mix. These admixtures are particularly useful in concrete mixes that require high strength and workability. Superplasticizers improve the workability of the mix by reducing the friction between the particles of the mix, resulting in a highly fluid mix with excellent finishing characteristics.

To know more about admixtures visit:

https://brainly.com/question/31715572

#SPJ11

Let sets A, B, and C be defined as follows:
A = {x ∈ Z | x = 5a −12 for some integer a},
B = {y ∈ Z | y = 5b + 8 for some integer b}, and
C = {z ∈ Z | z =10c + 2 for some integer c}.
Prove or disprove each of the following statements:
I. A = B
II. B ⊆ C
III. C ⊆ A

Answers

For every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.

To prove or disprove the statements, let's examine each one separately:

I. A = B

To prove this, we need to show that every element in set A is also an element in set B, and vice versa.

Let's start by considering an arbitrary element in set A: x = 5a - 12, where a is an integer. We want to find an integer b such that y = 5b + 8 is equal to x.

Setting y = 5b + 8 equal to x = 5a - 12, we can solve for b:

5b + 8 = 5a - 12
5b = 5a - 20
b = a - 4

Therefore, for every element x in set A, we can find a corresponding element y = 5b + 8 in set B, where b = a - 4. This demonstrates that A is a subset of B.

Now let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer a such that x = 5a - 12 is equal to y.

Setting x = 5a - 12 equal to y = 5b + 8, we can solve for a:

5a - 12 = 5b + 8
5a = 5b + 20
a = b + 4

Therefore, for every element y in set B, we can find a corresponding element x = 5a - 12 in set A, where a = b + 4. This demonstrates that B is a subset of A.

Since we have shown that A is a subset of B and B is a subset of A, we can conclude that A = B. Thus, statement I is true.

II. B ⊆ C

To prove this, we need to show that every element in set B is also an element in set C.

Let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer c such that z = 10c + 2 is equal to y.

Setting z = 10c + 2 equal to y = 5b + 8, we can solve for c:

10c + 2 = 5b + 8
10c = 5b + 6
c = (5b + 6) / 10
c = b/2 + 3/5

Since c is required to be an integer, b/2 must be an integer. This means that b must be an even number.

However, set B contains elements of the form 5b + 8, where b can be any integer. Therefore, there are elements in set B that cannot be expressed in the form 10c + 2, where c is an integer.

Hence, not every element in set B is an element in set C. Therefore, statement II is false.

III. C ⊆ A

To prove this, we need to show that every element in set C is also an element in set A.

Let's consider an arbitrary element in set C: z = 10c + 2, where c is an integer. We want to find an integer a such that x = 5a - 12 is equal to z.

Setting x = 5a - 12 equal to z = 10c + 2, we can solve for a:

5a - 12 = 10c + 2
5a = 10c + 14
a = 2c + 2

Therefore

, for every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.

Since we have shown that C is a subset of A, we can conclude that C ⊆ A. Thus, statement III is true.

To summarize:
I. A = B (True)
II. B ⊆ C (False)
III. C ⊆ A (True)

To know more about number click-
http://brainly.com/question/24644930
#SPJ11

Hi , can you help me with the empirical formula of the compound
pls, thank you

Answers

The empirical formula is the simplest and most reduced ratio of atoms in a compound. It shows the relative number of atoms of each element in a compound. To determine the empirical formula of a compound, you need to know the masses or percentages of each element present.

Here are the steps to determine the empirical formula:
1. Start with the given mass or percentage of each element in the compound.
2. Convert the given masses to moles by dividing the mass by the molar mass of each element. If you have percentages, assume a 100 g sample and convert the percentages to grams.
3. Determine the mole ratio by dividing each element's moles by the smallest number of moles calculated.
4. Round the ratios to the nearest whole number. If they are already close to whole numbers, you can skip this step.
5. Write the empirical formula using the whole number ratios obtained in the previous step. Place the element symbol and the whole number ratio as subscripts.

For example, let's say we have a compound with 12 g of carbon and 4 g of hydrogen.

1. Convert the masses to moles:
  - Carbon: 12 g / 12.01 g/mol = 1.00 mol
  - Hydrogen: 4 g / 1.01 g/mol = 3.96 mol (rounded to 4.00 mol)
2. Determine the mole ratio:
  - Carbon: 1.00 mol / 1.00 mol = 1.00
  - Hydrogen: 4.00 mol / 1.00 mol = 4.00
3. Round the ratios (no rounding needed in this example).
4. Write the empirical formula:
  - Carbon: C
  - Hydrogen: H

The empirical formula of this compound is CH4, which represents the simplest ratio of carbon to hydrogen atoms.

Remember, the empirical formula represents the simplest whole-number ratio of atoms in a compound. It does not provide information about the actual number of atoms in the molecule.

Learn more about empirical formula:

https://brainly.com/question/1603500

#SPJ11

4-The steel tube is bonded to the aluminum rod. If a torque of T="see above" kN.m is applied to end A. Find maximum and minimum shear stress in each material. Sketch shear stress distribution. (Gtt​=80GPa,Gal​=25GPa).

Answers

The torque is shared between these two materials.

The shear stress in the aluminum rod is obtained asτ_al [tex]= [(T x 10⁶) / (2.654 x 10⁷)] x [(D_t + D_al)/4]τ_al = (T/663.5) x (60/4)τ_al = (T/44.23) MPa[/tex]

The torque is resisted by both the steel tube and the aluminum rod.

Maximum shear stress in each material,τ_max = (T/J) x (D/2) ,

where D is the diameter of the steel tube or the aluminum rodSteel tube:

The torque is resisted by the steel tube only.

Therefore,τ_max(tube)[tex]= (T/J) x (D_t/2)τ_max(tube) = [(T x 10⁶) / (2.654 x 10⁷)] x (40/2)τ_max(tube) = (T/663.5) MPa Aluminum rod:[/tex]

Maximum and minimum shear stress in each material are:

Maximum shear stress in steel tube, τ_max(tube) = (T/663.5) MPa

Minimum shear stress in steel tube, τ_min(tube) = -τ_max(tube)

Minimum shear stress in aluminum rod, τ_min(al) = -τ_al

Maximum shear stress in aluminum rod, τ_max(al) = τ_al

The maximum and minimum shear stress in each material can be represented graphically as shown below:

Graphical representation of maximum and minimum shear stress in each material

To know more about resisted visit:

https://brainly.com/question/33728800

#SPJ11

!!!!HELP ASAP!!!! 100 Points!!!

Ben went to the ice-cream shop and purchased one scoop of rocky road ice-cream (shaped like a cylinder) on a sugar cone (shaped like a cone). The diameter of the scoop was 2.5 in. and the height was 4.25 in. What is the exact volume of the composite figure (the scoop of ice-cream atop a sugar cone) rounded to the nearest hundreth?

Answers

Answer:

Step-by-step explanation:

To find the volume of the composite figure, we need to find the volumes of the half-sphere and the cylinder separately, and then add them together.

The volume of the half-sphere is given by the formula:

V_half_sphere = (2/3)πr^3

where r is the radius of the half-sphere. In this case, the radius is 3 cm, so we have:

V_half_sphere = (2/3)π(3)^3

V_half_sphere = (2/3)π(27)

V_half_sphere = 18π

The volume of the cylinder is given by the formula:

V_cylinder = πr^2h

where r is the radius of the base of the cylinder, h is the height of the cylinder. In this case, the radius is 3 cm and the height is 10 cm, so we have:

V_cylinder = π(3)^2(10)

V_cylinder = 90π

To find the volume of the composite figure, we add the volumes of the half-sphere and the cylinder:

V_composite = V_half_sphere + V_cylinder

V_composite = 18π + 90π

V_composite = 108π

Therefore, the exact volume of the composite figure is 108π cubic centimeters.

Sonia has a big test tomorrow and she hasn't started studying. It is 5pm now and she drinks a
deluxe sized coffee with 200 mg of caffeine. The average half life of caffeine is 6 hours, meaning
that every 6 hours the amount of caffeine in her systems reduces by 50%. How many milligrams
of caffeine will be in her system by 4am? Round your answer to the nearest tenth of a mg.

Answers

Answer:

Not sure but i think 183.333333333

What is the final volume V₂ in milliliters when 0.824 L of a 43.8 % (m/v) solution is diluted to 22.2 % (m/v)?

Answers

To find the final volume V₂ in milliliters, use the dilution equation with initial concentrations 43.8% and 22.2%, and solve for V₂ by dividing both sides by 0.222.

To find the final volume V₂ in milliliters when a solution is diluted, we can use the equation for dilution:

C₁V₁ = C₂V₂

Where C₁ is the initial concentration, V₁ is the initial volume, C₂ is the final concentration, and V₂ is the final volume.

Given:
C₁ = 43.8% (m/v)
V₁ = 0.824 L
C₂ = 22.2% (m/v)

We need to find V₂.

First, let's convert the initial and final concentrations to decimal form:
C₁ = 43.8% = 0.438
C₂ = 22.2% = 0.222

Now we can substitute the values into the dilution equation:
0.438 * 0.824 = 0.222 * V₂

Solving for V₂:
0.360312 = 0.222 * V₂

Dividing both sides by 0.222:
V₂ = 0.360312 / 0.222

V₂ ≈ 1.625 L

Since the question asks for the volume in milliliters, we need to convert liters to milliliters:
1 L = 1000 mL

So, V₂ ≈ 1.625 * 1000 = 1625 mL

Therefore, the final volume V₂ is approximately 1625 milliliters.

To know more about dilution equation Visit:

https://brainly.com/question/29361339

#SPJ11

A culture medium that is contaminated with 10+ microbial spores per m will be heat sterilised at 121°C At this temperature, the specific death rate can be assumed to be 3.2 min of the contamination must be reduced to a chance of 1 in 1000, estimate the required sterilisation time. A t = 9.35 min

Answers

The estimated required sterilization time is approximately 2.1574 minutes.

To estimate the required sterilization time for a culture medium contaminated with 10+ microbial spores per m³, we can use the concept of the specific death rate. The specific death rate refers to the rate at which microorganisms are killed during sterilization.

Given that the specific death rate at 121°C is 3.2 minutes, and we want to reduce the contamination to a chance of 1 in 1000, we can calculate the required sterilization time.

First, let's define the variables:

N₀ = initial number of spores per m³ (10+ microbial spores per m³)
Nₜ = number of spores per m³ after time t
k = specific death rate (3.2 min⁻¹)
P = probability of survival after time t (1 in 1000)

Now, let's use the formula for the specific death rate:

Nₜ = N₀ * e^(-kt)

We want to find the time t required to achieve a probability of survival of 1 in 1000. In other words, we want P = 1/1000.

P = e^(-kt)

Taking the natural logarithm of both sides, we get:

ln(P) = -kt

Solving for t, we have:

t = -ln(P) / k

Substituting P = 1/1000 and k = 3.2 min⁻¹ into the equation, we can calculate the required sterilization time.

t = -ln(1/1000) / 3.2

Using a scientific calculator, we can find that ln(1/1000) is approximately -6.9078. Substituting this value into the equation, we have:

t = -(-6.9078) / 3.2
t = 6.9078 / 3.2
t ≈ 2.1574 minutes

Therefore, the estimated required sterilization time is approximately 2.1574 minutes.

It's important to note that this is an estimated time based on the specific death rate and probability of survival given. Actual sterilization times may vary depending on other factors such as the type of microorganisms present, the heat transfer rate, and the effectiveness of the sterilization equipment.

Know more about sterilization here:

https://brainly.com/question/33532853

#SPJ11

6. Which characteristics correctly describe a proton? a) approximate mass 1 amu; charge +1; inside nucleus b) approximate mass 5 x 104 amu; charge -1; outside nucleus c) aproximate mass 5 x 104 amu; charge +1; inside nucleus d) approximate mass 1 amu; charge 0; inside nucleus e) approximate mass 1 amu; charge +1; outside nucleus

Answers

The correct characteristic that describes a proton is: a) approximate mass 1 amu; charge +1; inside nucleus.

A proton is a subatomic particle with a positive charge and a mass of approximately 1 atomic mass unit (amu). It is located inside the nucleus of an atom. Protons are fundamental particles found in all atomic nuclei and play a crucial role in determining the atomic number and identity of an element. Their positive charge balances the negative charge of electrons, creating a neutral atom.

To know more about nucleus,

https://brainly.com/question/25663043

#SPJ11

Add. −12+(−20) Enter your answer in the box.

Answers

Answer: -31

Step-by-step explanation:

-12+(-21)   is equal to -12-21 which is -31

The correct answer is:

-32

Work and explanation:

Remember the integer rule:

[tex]\sf{a+(-b)=a-b}[/tex]

Similarly

[tex]\sf{-12+(-20)=-12-20}[/tex]

Simplify

[tex]\sf{-32}[/tex]

Therefore, the answer is -32.

As the molar masses of molecular substances increase, generally their boiling points and vapor pressures (A) decrease, decrease (B) increase, decrease (C) decrease, increase (D) increase, increase At

Answers

As the molar masses of molecular substances increase, their boiling points generally increase due to stronger intermolecular forces, while their vapor pressures generally decrease due to slower molecular motion. Therefore, the answer to the given question is (C) decrease, increase.

As the molar masses of molecular substances increase, generally their boiling points and vapor pressures decrease.

The boiling point of a substance is the temperature at which it changes from a liquid to a gas. It is influenced by intermolecular forces, which are the attractive forces between molecules. As the molar mass of a molecular substance increases, the intermolecular forces generally become stronger. This is because larger molecules have more electrons and a greater surface area, which allows for stronger attractive forces between molecules. Stronger intermolecular forces require more energy to overcome, leading to a higher boiling point. So, as the molar masses of molecular substances increase, their boiling points tend to increase.

On the other hand, vapor pressure is the pressure exerted by the gas molecules when a substance is in equilibrium between its liquid and gaseous phases. It is affected by the ease with which molecules can escape from the liquid phase into the gas phase. As the molar mass of a molecular substance increases, the average speed of its molecules generally decreases. This is because larger molecules have more mass, making it harder for them to move and escape from the liquid phase. As a result, the vapor pressure of a substance decreases as its molar mass increases.

To summarize, as the molar masses of molecular substances increase, their boiling points generally increase due to stronger intermolecular forces, while their vapor pressures generally decrease due to slower molecular motion. Therefore, the answer to the given question is (C) decrease, increase.

Learn more about molecular on :

https://brainly.com/question/475709

#SPJ11

Members of which class of biomolecules are the building blocks of proteins? a)núcleic acids b)glycerols amino acids c)fatty acids d)monosaccharides

Answers

The class of biomolecules which pertains to the building blocks of proteins are b) amino acids.

Amino acids are the building blocks of proteins. Proteins are large, complex molecules made up of chains of amino acids linked together by peptide bonds. There are 20 different types of amino acids that can be found in proteins, each with its own unique side chain. These side chains give each amino acid its specific properties and functions.

When amino acids are linked together in a specific sequence, they form polypeptides, which then fold into complex three-dimensional structures to become functional proteins. The sequence of amino acids in a protein is determined by the genetic code, which is encoded in DNA.

In summary, amino acids are the building blocks of proteins. They are linked together in a specific sequence to form polypeptides, which then fold into functional proteins. The sequence of amino acids is determined by the genetic code. Hence, the correct answer is Option B.

Learn more about Amino acids here: https://brainly.com/question/28362783

#SPJ11

Instructions: Use the given interpretations to translate the following arguments written in predicate logic into natural, English sentences. Ax: "x is an athlete" Bx: " x is brawny" Cx: "x is a champion"
m: "Mary"
g: "Gail" n: "Ned" 1.a. (x)(Ax⊃Bx) b. Am ∙An. /Bm∙Bn 2.a(x)(Ax⊃Bx) b.(x)(Bx⊃Cx)/(x)(Ax⊃Cx)

Answers

1.a. For all x, if x is an athlete, then x is brawny.

b. Mary is an athlete and Ned is an athlete. Therefore, Mary is brawny and Ned is brawny.

2.a. For all x, if x is an athlete, then x is brawny.

b. For all x, if x is brawny, then x is a champion. Therefore, for all x, if x is an athlete, then x is a champion.

1.a. The first argument states that if something is an athlete, then it is brawny. This can be understood as a general statement about athletes and their physical attributes.

b. The second part of the argument introduces specific individuals, Mary and Ned, and states that both of them are athletes. Therefore, based on the premise from part a, it can be concluded that Mary is brawny and Ned is brawny.

2.a. The first argument is similar to the previous one, stating that if something is an athlete, then it is brawny.

b. The second part of the argument introduces a new premise, stating that if something is brawny, then it is a champion. Based on this premise, and using the transitive property of implication, it can be concluded that if something is an athlete, then it is a champion.

Learn more about:all x

brainly.com/question/32267629

#SPJ11

It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. find the discharge (m^3 /s) by using Kutter Gand Ganguillet's equation. n=0.020

Answers

It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. Using Kutter Gand Ganguillet's equation the discharge is 4.719 m³/s.

Given: Diameter of the pipe (D) = 3 m

Depth of flow (y) = 0.75 m

Loss of head (h) = 3 m per km length = 3/1000 m per m length= 0.003 m/m length

N = 0.020

Discharge (Q) = ?

Formula used: Kutter's formula is given by;

Where f = (1/n) {1.811 + (6.14 / R)} ... [1]

Here, R = hy^(1/2)/A

where A = πD²/4

For circular pipes, hydraulic mean depth is given by; Where A = πD²/4 and P = πD.= πD^3/2

Therefore, the discharge is given by the following formula;

Where V = Q/A and A = πD²/4= Q / πD²/4 = 4Q/πD²

Substituting equation [1] and the above values in the discharge formula, we have

On simplifying, we get; Therefore, the discharge is 4.719 m³/s (approx).

Hence, the discharge is 4.719 m³/s.

Learn more about Kutter Gand Ganguillet's

https://brainly.com/question/33139670

#SPJ11

It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. The discharge is approximately 1.25 m^3/s.

To calculate the discharge using the Kutter-Ganguillet equation, we need to use the formula:

Q = (1.49/n) * A * R^(2/3) * S^(1/2)

Where:
Q is the discharge,
n is the Manning's roughness coefficient (given as 0.020),
A is the cross-sectional area of the flow,
R is the hydraulic radius, and
S is the slope of the energy grade line.

First, we need to find the cross-sectional area (A) and hydraulic radius (R) of the flow. The cross-sectional area can be calculated using the formula:

A = π * (D/2)^2

Where D is the diameter of the pipe, given as 3.0 m. Plugging in the values:

A = π * (3.0/2)^2
A = 7.07 m^2

Next, we need to calculate the hydraulic radius (R), which is defined as:

R = A / P

Where P is the wetted perimeter of the flow. For a circular pipe, the wetted perimeter can be calculated as:

P = π * D

Plugging in the values:

P = π * 3.0
P = 9.42 m

Now we can find the hydraulic radius:

R = A / P
R = 7.07 / 9.42
R = 0.75 m

Finally, we can calculate the discharge (Q) using the Kutter-Ganguillet equation:

Q = (1.49/0.020) * 7.07 * (0.75)^(2/3) * (3)^(1/2)
Q ≈ 1.25 m^3/s

Therefore, the discharge is approximately 1.25 m^3/s.

Learn more about discharge

https://brainly.com/question/31710428

#SPJ11

If $650 000 is saved for retirement, what rate of interest, compounded monthly, will provide payments of $3750 every month for the next 25 years? Select one: a. 14.606797% b. 0.811327% c. 4.888702% d. 4.867963%

Answers

The rate of interest, compounded monthly, that will provide payments of $3750 every month for the next 25 years is approximately 4.867963%. The correct option is d. 4.867963%.

To find the rate of interest, compounded monthly, that will provide payments of $3750 every month for the next 25 years, we can use the formula for the future value of an ordinary annuity:

Future Value = Payment * ((1 + r)^n - 1) / r

Where:

- Future Value is the accumulated amount after the specified time period

- Payment is the amount received at regular intervals (monthly)

- r is the interest rate per compounding period (monthly)

- n is the number of compounding periods (in this case, 25 years * 12 months = 300 months)

We want to find the rate of interest (r), so we rearrange the formula:

r = ((Future Value / Payment) + 1)^(1/n) - 1

Given:

Future Value = $650,000

Payment = $3,750

n = 300

Let's substitute these values into the formula:

r = (($650,000 / $3,750) + 1)^(1/300) - 1

Calculating:

r ≈ 0.048677

Converting to a percentage:

r ≈ 4.867963%

Learn more about rate of interest:

https://brainly.com/question/20690803

#SPJ11

(i) List and describe one (1) physical and one (1) biological waste water quality parameter each, of concern during waste water treatment. What are their sources and impacts on the environment? [2+2+3+3 marks] 15000

Answers

Turbidity is a physical wastewater quality parameter and refers to the turbidity of water caused by suspended solids. It is generated from sources such as soil erosion, industrial waste, and wastewater itself.

When turbidity increases, it affects the environment by reducing the amount of solar radiation, impairing the growth of aquatic plants, and impairing the respiratory and feeding mechanisms of aquatic organisms. affects In addition, reduced heat dissipation can lead to higher water temperatures, further impacting aquatic life.

Biological oxygen demand (BOD), a water quality parameter for biological wastewater, measures the amount of dissolved oxygen consumed by microorganisms when breaking down organic matter. Elevated BOD levels cause oxygen starvation, harming fish and other aquatic organisms and unbalancing aquatic ecosystems. 

To learn more about Turbidity:

https://brainly.com/question/31558188

#SPJ4

Please help with the question,

will give a good rating for the correct answer.

Derive the Velocity equation of the piston from its position equation. In order to derive position use/learn product-rule, power rule, and chain-rule of calculus. This is a straight forward derivation

Answers

To derive the velocity equation of the piston from its position equation, differentiate the position equation with respect to time using the product rule, power rule, and chain rule of calculus.

Let's start with the position equation of the piston, denoted as x(t), where t represents time:

x(t) = f(t * g(t)

Here, f(t) and g(t) are differentiable functions of time.

The velocity equation is the derivative of the position equation with respect to time:

v(t) = d/dt [x(t)]

Using the product rule of differentiation, the derivative of the product of two functions is:

d/dt [f(t) * g(t)] = f'(t) * g(t) + f(t) * g'(t)

Now, let's apply the product rule to differentiate the position equation:

v(t) = d/dt [f(t) * g(t)]

= f'(t) * g(t) + f(t) * g'(t)

The derivative of f(t) with respect to time, denoted as f'(t), represents the rate of change of the first function. Similarly, g'(t) represents the rate of change of the second function.

The power rule states that if a function h(t) is of the form h(t) = t^n, where n is a constant, then its derivative is:

d/dt [t^n] = n * t^(n-1)

We can use the power rule to find the derivatives of f(t) and g(t) if they are in a simple form like t^n.

Finally, by substituting the derivatives of f(t) and g(t) into the velocity equation, we obtain the velocity equation of the piston in terms of f'(t) and g'(t):

v(t) = f'(t) * g(t) + f(t) * g'(t)

for such more question on velocity equation

https://brainly.com/question/80295

#SPJ8

Use the convolution theorem to obtain a formula for the solution to the given initial value problem, where g(t) is piecewise continuous on (0,00) and of exponential order. y' +4y=g(t): y(0)=0, y'(0)=5

Answers

To solve the given initial value problem, we can use the convolution theorem. The convolution theorem states that if we have a linear constant coefficient ordinary differential equation of the form y' + ay = g(t), where a is a constant and g(t) is a function, then the solution y(t) can be found by convolving the function g(t) with the impulse response h(t) of the differential equation.

In this case, we have the equation y' + 4y = g(t) with the initial conditions y(0) = 0 and y'(0) = 5. To find the solution, we need to determine the impulse response h(t) and then convolve it with the function g(t).

The impulse response h(t) can be found by solving the homogeneous equation y' + 4y = 0. The characteristic equation is r + 4 = 0, which has a root r = -4. Therefore, the general solution of the homogeneous equation is y_h(t) = C*e^(-4t), where C is a constant.

To find the particular solution y_p(t), we need to convolve g(t) with the impulse response h(t). The convolution integral is given by:

y_p(t) = ∫[0 to t] g(t-u) * h(u) du

Here, g(t-u) represents the time reversal of g(t) and h(u) represents the impulse response.

After obtaining the particular solution y_p(t), we can find the complete solution y(t) by adding the homogeneous solution and the particular solution:

y(t) = y_h(t) + y_p(t)

By substituting the given initial conditions into the complete solution, we can find the values of the constants and obtain the final solution to the initial value problem.

Note: The given information states that g(t) is piecewise continuous on (0, ∞) and of exponential order. The convolution theorem can be used to solve this specific type of initial value problem, where the impulse response exists and the function g(t) satisfies the conditions mentioned.

To know more about "Homogeneous Equation": https://brainly.com/question/14926412

#SPJ11

3. Design a square column footing for a 400-mm square tied interior column that supports a dead load Pn = 890 kN and a live load P₁ = 710 kN. The column is reinforced with eight 25 mm bars, the base of the footing is 1500 mm below grade, the soil weight is 1600 kg/m³, fy = 413.7 MPa, f = 20.7 MPa (p = 2400 kg/m³), and qa = 240 kPa.

Answers

The designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.

To design a square column footing, we need to consider the applied loads, the column reinforcement, and the properties of the soil. Here's the step-by-step process:

Step 1: Determine the total applied load

The total applied load on the column footing is the combination of the dead load (Pn) and the live load (P₁):

Total Load (P) = Pn + P₁

Total Load (P) = 890 kN + 710 kN

Total Load (P) = 1600 kN

Step 2: Calculate the area of the footing

Since the column is square with a side length of 400 mm, the area of the footing is calculated as:

Footing Area (A) = (Column Side Length)²

Footing Area (A) = (400 mm)²

Footing Area (A) = 160,000 mm²

Step 3: Determine the bearing capacity of the soil

The bearing capacity of the soil (q) is given by the formula:

q = qa + (γ × B × Nc)

Where:

qa = Allowable soil pressure

= 240 kPa

γ = Unit weight of soil

= 1600 kg/m³

B = Width of the footing

= Column Side Length

= 400 mm

Nc = Bearing capacity factor for a square footing

= 5.14 (from bearing capacity tables)

Substituting the values:

q = 240 kPa + (1600 kg/m³ × 400 mm × 5.14)

q = 240 kPa + 4,115,200 kg/m²

q = 240 kPa + 4.1152 MPa

q ≈ 4.3552 MPa

Step 4: Check the allowable bearing pressure

The allowable bearing pressure is calculated as:

Allowable Bearing Pressure (p) = 0.45 × f

p = 0.45 × 20.7 MPa

p ≈ 9.315 MPa

Step 5: Calculate the required footing area

The required footing area can be calculated by dividing the total load by the allowable bearing pressure:

Required Footing Area (A_req) = Total Load (P) / Allowable Bearing Pressure (p)

A_req = 1600 kN / 9.315 MPa

A_req ≈ 171.683 m²

Step 6: Determine the required side length of the footing

Since the footing is square, we can calculate the side length by taking the square root of the required footing area:

Footing Side Length (L) = √(Required Footing Area)

L = √(171.683 m²)

L ≈ 13.105 m

Since the column is 400 mm square, we need to round up the footing side length to the nearest larger multiple of the column side length. Therefore, the footing side length will be 450 mm (0.45 m).

Step 7: Verify the reinforcement requirement

The reinforcement requirement is determined based on the applied loads and the column size. In this case, since the column is reinforced with eight 25 mm bars, the reinforcement area (As) is calculated as:

Reinforcement Area (As) = Number of Bars × Cross-sectional Area of One Bar

As = 8 × (π/4) × (25 mm)²

As ≈ 1570.796 mm²

The minimum reinforcement requirement is typically 0.4% to 0.8% of the footing area. Let's calculate the minimum reinforcement:

Minimum Reinforcement (As_min) = 0.004 × Footing Area

As_min = 0.004 × 171.683 m²

As_min ≈ 0.686732 m²

Convert As_min to mm² for easier comparison:

As_min ≈ 686,732 mm²

Since As is greater than As_min, the reinforcement requirement is satisfied.

In summary, the designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.

To know more about square visit

https://brainly.com/question/22827180

#SPJ11

Solve y′++36y=δ(t−3),y(0)=y′(0)=0 y(t)= for t<3 for t≥3

Answers

The solution to the differential equation is y(t) = 0, for t < 3

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex], for t ≥ 3

How to solve differential equation

Solve the differential equation using Laplace transform.

Taking the Laplace transform of both sides of the equation

[tex]s^2 Y(s) + 36 Y(s) = e^{-3s}[/tex]

[tex]Y(s) = e^{-3s} / (s^2 + 36)[/tex]

Partial fraction decomposition of Y(s)

[tex]Y(s) = e^{-3s} / (s^2 + 36) = (1/6) * (1/(s+6)) - (1/6) * (1/(s-6)) * e^{-3s}[/tex]

Take the inverse Laplace transform

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}) * u(t-3)[/tex]

where u(t) is the unit step function.

For t < 3, the unit step function is 0

y(t) = 0.

For t ≥ 3, the unit step function is 1

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex]

Therefore, the solution to the differential equation is

y(t) = 0, for t < 3

[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}),[/tex] for t ≥ 3

Learn more on differential equation on https://brainly.com/question/28099315

#SPJ4

Project X has an initial investment cost of $20.0 million. After 10 years it will have a salvage value of $2.0 million. This project will generate annual revenues of $5.5 million per year and will have an annual operating cost of $1.8 million. What is the internal rate of return of this investment, assuming a 10-year life of the project?
A. 8.5% .
B. 10.3 %. C 13.8%. D. 15.1%

Answers

Answer: The internal rate of return of this investment is 15.1%. The correct option is D.

Explanation:

Internal rate of return (IRR) is the discount rate that makes the net present value (NPV) of an investment zero. In other words, it is the rate at which the sum of all future cash flows (positive and negative) from an investment equals its initial cost. The IRR is also referred to as the discounted cash flow rate of return.

The formula for calculating IRR is:

Where: NPV = net present value

CFt = the cash flow in period t

r = the discount rate Project X has an initial investment cost of $20.0 million, an annual operating cost of $1.8 million, an annual revenue of $5.5 million, and a salvage value of $2.0 million after ten years.

Therefore, the total revenue over ten years will be:

Revenue = $5.5 million x 10 years = $55 million.

The total cost over ten years will be:

Cost = ($1.8 million + $20 million) x 10 years = $198 million.

The net cash flow (NCF) over ten years is:

NCF = Revenue – Cost + Salvage Value

= $55 million – $198 million + $2 million = -$141 million.

To calculate the IRR, we need to find the discount rate that makes the NPV of the investment equal to zero.

We can do this using a financial calculator or spreadsheet software. However, we can also use trial and error by trying different discount rates until we get an NPV close to zero.

Using this method, we find that the IRR of Project X is approximately 15.1%, which is closest to option D.  

Therefore, the correct option is D. 15.1%.

To know more about investment, visit:

https://brainly.com/question/14921083

#SPJ11

Morgan secured a 6-year car lease at 5.60% compounded annually that required her to make payments of $889.72 at the beginning of each month. Calculate the cost of the car if she made a downpayment of $3,500. Round to the nearest cent

Answers

The cost of the car, rounded to the nearest cent, is $54,759.33.

To calculate the cost of the car, we need to consider the monthly payments and the down payment made by Morgan.

First, let's calculate the total amount paid over the 6-year lease. Morgan makes monthly payments of $889.72 for 6 years, which is a total of 6 x 12 = 72 payments.

To find the future value of these payments, we can use the formula for the future value of an ordinary annuity:

FV = PMT x [(1 + r)^n - 1] / r,

where FV is the future value, PMT is the monthly payment, r is the interest rate per compounding period, and n is the number of compounding periods.

In this case, the monthly payment PMT is $889.72, the interest rate r is 5.60% (or 0.056 as a decimal), and the number of compounding periods n is 72 (6 years x 12 months).

Let's calculate the future value:

FV = $889.72 x [(1 + 0.056)^72 - 1] / 0.056

Calculating this using a calculator or spreadsheet, the future value is approximately $58,259.33.

Now, let's subtract the down payment of $3,500 from the future value:

Cost of the car = Future value - Down payment
               = $58,259.33 - $3,500
               = $54,759.33

Learn more about future value here: https://brainly.com/question/30390035

#SPJ11

1 ) Inflation causes things to cost more, and for our money to buy less (hence your grandparents saying "In my day, you could buy a cup of coffee for a nickel"). Suppose inflation decreases the value of money by 4% each year. In other words, if you have $1 this year, next year it will only buy you $0.96 worth of stuff. How much will $100 buy you in 10 years? $_____ 2) Assume there is a certain population of fish in a pond whose growth is described by the logistic equation. It is estimated that the carrying capacity for the pond is 1200 fish. Absent constraints, the population would grow by 130% per year.
If the starting population is given by p0=600, then after one breeding season the population of the pond is given by p1= After two breeding seasons the population of the pond is given by p2 =

Answers

Inflation decreases the value of money by 4% each year. For $1, the next year it will only buy [tex]$0.96[/tex] worth of stuff. The actual value of money decreases by [tex](100-96)/100=4/100=0.04.[/tex]

To find v_n, we multiply the initial value [tex]$100[/tex] with the decreased value of each year [tex](1-0.04) over n=10[/tex] years. [tex]v_n= $100(1-0.04)^10v_n= $100(0.96)^10v_n= $100(0.634) = $63.40[/tex]

The actual value of[tex]$100[/tex] after 10 years will be [tex]$63.40.2[/tex]) Given, Starting population of the fish pond is p0=600 and the carrying capacity for the pond is 1200 fish.

To calculate the population after the first breeding season, we need to find the constant of proportionality.

Given, The population of the fish pond grows by 130% per year.\

So,

[tex]a = 1.3p1 = p0 / (1+ a*(p0))[/tex]

[tex]p1= 600 / (1 + 1.3*(600))p1 = 600 / (1 + 780)p1 = 600/781[/tex]

After the first breeding season, the population of the fish pond is 600/781.

Two breeding seasons: To calculate the population after the second breeding season, we need to use the p1 calculated in the previous step.

[tex]p2= p1 / (1+ a*(p1))p2= (600/781) \\(1+ 1.3*(600/781))p2= (600/781) \\(1+ 780/781)p2 = 467400 / 609961[/tex]

The population of the fish pond after two breeding seasons is 467400/609961.

To know more about decreases visit:

https://brainly.com/question/32610704

#SPJ11

Other Questions
The composition of a compound is 28.73% K, 1.48% H, 22.76% P, and 47.03% O. The molar mass of thecompound is 136.1 g/mol.I a.) Limits for 4-sigma x chartsUpper Control Limit?Lower Control Limit?b.) What are the limits with 3 standard deviations from the target?The 3-sigma x chart control limits:Upper Control Limit?Lower Control Limit?Rosters Chicken advertises "ite" chicken wath 304 fower calories than standard chickon. When the procnss for "lite" chicken breast production is in control, the average chicken breast contains 430 calories. and the standard deviation in calocic content of the chicken breast population is 20 calories. Rosters wants to design an x-chat to monito the caloric content of chicken breasts, where 25 chicken breasts would be chosen at random to form 6ach sample. a) What are the lower and unper control Ienits for this chart if those limits are chosen to be four standard deviasons fram the target? Upper Centrol Lima (uL- ) " Classify each of the following accounts taken from TH Company's statement of financial position and income statement (10, each 1point). 1. Building - ( ) 2. Copyrights-( ) 3. Retained earnings- ( 4. Note payable (due in 5 years) - ( 5. Inventory - ( 6. Sales returns and allowances - ( 7. Interest revenue - ( 8. Depreciation expense - ( 9. Accumulated depreciation - ( 10. Property Tax payable - ( ) What is true of the normal state of the following circuit?a.There is no current in 2 ohms.b.A charge of 12C is stored in the 4F capacitor.c.The voltage at both ends of the 3F capacitor is 3V.d.The two capacitors store the same energy [J]. Determine the weighted-average number of shares outstanding as of December 31, 2021. The weighted-average number of shares outstanding eTextbook and Media Attempts: 1 of 6 used (b) Calculate theoretically the current I, and I2 by using the superposition method R11 R7 ww R10 ww www 200 150 200 V4 V5 -15V -30V 11 R9 4000 12 R8 1000 Students already in tenuous circumstances may find themselves undereven more financial strain due to the coronavirus pandemic, how hasthis affect sudents with sickle cell diease. 1) mDuring the execution of a C program, at least how manyactivation records belonging to that program must be on therun-time stack?a.1b.2c.0d.32) Immediately after returning from a function which returns a value, what does R6 point to?a.Address of the next instruction to executeb.The first entry in the current function's activation recordc.The return valued.The last entry in the current function's activation record3) All of the following are correct C representations of the floating-point literal 101.01 EXCEPTa.101.01b.10101E-2c.1.0101*10^2d.0.10101e34) scanf/printf are more general functions of fscanf/fprintf.Select one:TrueFalse5)The minimum number of entries an activation record can have is 1Select one:TrueFalse Equity method journal entries with intercompany sales of inventory inventory to the investee, realizing a gross profit of $46,000 on the sale. At the end of the year, 20% of the inventory remained unsold by the investee. Required a. How much equity income should the investor report for the year? b. What is the balance of the Equity Investrnent at the end of the year? ollowing year? Naomi wants to save $100,000, so she makes quarterly payments of $1,500 into an account that earns 4.4%/a compounded quarterly. (If you are using TVM Solver, please ensure you provide screenshots of your work or breakdown how you entered everything into the solver).How long will it take her to reach her goal?Would doubling her payment amount save her half the time needed to save? Support your statement. You will need to do a comparison for two computers, documenting your findings for both computers on a PowerPoint Presentation-Name of the computer must bevisible, ex. Apple, HB, etc..You are a fictitious small business owner-you make up the appropriate small business-First slide describes the business and the name-3-4 sentences. You have 1 in your budget to purchase a computer. You may purchase a laptop or desktop. You need the computer for your fictitious small business.1. What is the operating system?1. What is the CPU?:D2. How much RAM is installed?3. How large is the hard drive?4. Are the following applications on the system? What1. Microsoft WordVersion2. Microsoft Excel3 Microsoft Access4. Microsoft PowerPointVersionVersi I NEED HELP PLEASEEEEE IS JUST QUESTIONS BUT I HAVE TO GET THE QUESTIONS FROM THE READING Using the primary documents, construct a conversation between a poor, landless farmer and a middle-class American in which each evaluates the economic challenges and benefits they face.In doing so, be sure to define and explain what Americans understood to be meant by "the middle class."Why was it almost impossible for landless farmers to achieve middle class status?HERE ARE THE DOCUMENTS a) Calculate the slope factor of safety for a circular arc trial failure plane that has a 35 m radius with a center of rotation located 20 m directly above the slopes midpoint. The slope has an inclination of 40 and a vertical height of 20 m. Soil borings indicate that a uniform clayey soil with = 16.5 kN/m3 and c = 45 kN/m2 ( = 0) exists in the area. The weight of the failure mass is 9,900 kN per meter of length (length perpendicular to the cross-section). The horizontal distance between the center of rotation and the center of gravity of failure mass is 11 m. Use the basic method for the stability analysis. b) Is this circle the critical circle? If not, why? In preparation for being an ethical worker, you can practice being an ethical consumer. How can you become an ethical consumer? Interest GroupsWhich statement describes a relationship discussed in the paragraph 5 pts (Rational method Time of concentration of a watershed is 30 min. If rainfall duration is 30 min, the peak flow is (just type your answer as 1 or 2 or 3 or 4 or 5): 1) CIA 2) uncertain, but it is Q.Evaluate the concepts peak water, grey water footprintsand virtual water and howthese can be used to better understand and manage the use ofwater. The current stock price of IBM is $100, and three-month call options with a strike price of $105 currently sell for $2.50. An investor who feels that the price of the stock will increase is trying to decide between buying 100 shares and buying 4,000 call options. Both strategies involve an investment of $10,000. a) Illustrate that the potential profit and potential loss are both higher with option trading, by showing what happens if the stock price rises to $110, or falls to $90. b) How would an investor choose among the two investment with different risk appetite? For E. coli growing under glucose limitation in a steady state chemostat with endogeneous metabolism and product formation, determine the product yield coefficient (YP/S) given S0 = 10 g/L, S = 5 g/L, X = 5 g cells/L, qp = 0.3 mg P/g cellshr, kd = 0.04 hr-1 and D = 0.2 hr-1 . A perfectly elastic collision conserves Select all that apply. mass mechanical energy momentum