Answers
Considering the Avogadro's Law, 1.52 moles are left in the container.
Avogadro's LawAvogadro's Law is a gas law that establishes the relationship between the amount of gas and its volume when temperature and pressure are held constant.
This law states that the volume is directly proportional to the amount of gas: if the amount of gas increases, the volume will increase; while if the amount of gas decreases, the volume decreases.
Mathematically the law can be expressed as:
[tex]\frac{V}{n}=k[/tex]
Assuming that you have a certain amount of gas n1 that occupies a volume V1 and the amount of gas varies until a new value n2, then the volume will change to V2, and the following will be true:
[tex]\frac{V1}{n1}=\frac{V2}{n2}[/tex]
Amount of moles left in this caseIn this case, you know:
V1= 65 Ln1= 2 molesV2= 49.4 Ln2= ?Replacing in the Avogadro's Law:
[tex]\frac{65 L}{2 moles}=\frac{49.4 L}{n2}[/tex]
Solving:
[tex]n2x\frac{65 L}{2 moles}=49.4 L[/tex]
[tex]n2=\frac{49.4 L}{\frac{65 L}{2 moles}}[/tex]
n2= 1.52 moles
Finally, 1.52 moles are left in the container.
Learn more about Avogadro's Law:
https://brainly.com/question/4147359
Related Questions
This is the probability distribution of an electro in a atom or molecule
Answers
Answer:
electron orbitals (okay nayn manghula kana Lng)
If force of 6.0 N causes a 1.0 kg block to accelerate 4.0 m/s2 to
the right, then what is the force of friction acting on the block?
Answers
The force of friction acting on the block is -2N.
To find the force of a friction, the given datas are,
Force = 6N
Mass = 1 kg
Acceleration = 4 m/s².
What is the force of friction?The push or pull on an object that made the changes in the velocity with the mass. The object's or body's is to be at motion or at rest will be determined by Force. It has both the magnitude and direction.
The Net Force of the object can be written by:
Fnet = ma
where m is the mass of the object in kg
a is the acceleration of the object in m/s^2
Substituting the values in the formula,
Fnet = (1.0)(4.0)
= 4 N
We also know that Net force is also the sum of all forces acting on an object. In this case Friction and the Pushing Force is acting on the object. Hence we can write that:
Fnet = Pushing Force + (-Friction)
6N = 4 N - Friction
Friction = - 2N
Hence the force of friction is -2 N.
Learn more about Friction of force,
https://brainly.com/question/1714663
#SPJ2
Does anyone know this one?
Answers
This part is just telling you what they mean by hallowed be Your name is
Hope this helps :))
How many moles does 21. 7 L of gas at STP represent?
Answers
Answer:
.96875 moles
Explanation:
22.4 liters per mole at STP for a gas
21.7 / 22.4 = .96875 moles
A student prepared a stock solution by dissolving 15. 0 g of koh in enough water to make 150. Ml of solution. She then took 15. 0 ml of the stock solution and diluted it with enough water to make water to make 65. 0 ml of a final solution. What is the concentration of koh for the final solution?.
Answers
weight of dissolving KOH is=10 g KOH molecular weight is= 56.1 moles
Have a nice day!
5. When baking cookies, it is important to correctly identify the white granular substance you are
putting into the cookies. Instead of sugar, my grandma put 97.21 grams of salt (NaCl) in her
batch of cookies! How many moles of salt were in the cookie dough?
Answers
Answer:
I multiply 97.21 by the amount of cookies you have.
Explanation:
i dont know if this is correct but i multiplyed it by two and got 194.42
what is the relationship between sign of a charge and the direction of electrostatic force
Answers
Answer:
The direction of the force vector depends on the sign of the charges. If the charges are the same, the force points away from the other charge.
Explanation:
What is the molarity of a solution that contains 6 moles of CaCl2 in 4 liters of solution?
A- 1.5M
B- 3.5M
C-3M
D-6M
Answers
Answer:
1.5 M
Explanation:
Molarity is mols/L
take 6moles÷4 L = 1.5M or mol/L
hope this helps, good luck!
Would a hurricane more likely remain a hurricane if it reached point A or point B? Explain your answer.
Answers
Answer:
B
Explanation:
Water gives more energy to the hurricane, so it would stay as one. If the hurricane hits the land, it will start getting smaller till it disappears.
Which is an example of an accurate manipulation of the ideal gas law?.
Answers
The correct manipulation of the ideal gas equation as shown here is (PV)/R=nT.
What is the ideal gas law?
According to the ideal gas law; PV = nRT. Now, this law applies to gases at high temperature and low pressure.
Given this fact, we know that the correct manipulation of the ideal gas equation as shown here is (PV)/R=nT.
Missing parts;
Which is an example of an accurate manipulation of the Ideal Gas Law and explain why?
(PV)/R=nT 1
PV=(nT)/R 2
PV=(RT)/n 3
PV=(nR)/T 4
Learn more about ideal gas equation: https://brainly.com/question/4147359
Radiation takes place with________ between a heat source and an object.
type your answer in the blank
Answers
Answer:
radiation takes place with energy between a heat source and an object
Explanation:
g o o g l e
What is the core of the earth made of?
Answers
Answer:
The core of the earth is made of iron-nickel alloys.
why is it important to control the non-tested variables in an experiment?
Answers
Answer:
In experiments, a researcher or a scientist aims to understand the effect that an independent variable has on a dependent variable. Control variables help ensure that the experiment results are fair, unskewed, and not caused by your experimental manipulation.
Explanation:
I hope this helps out.
How many grams of potassium sulfate must be added to make 200. mL of a 0.200 M potassium sulfate solution
Answers
Answer: 6.97 g
Explanation:
Grams of potassium sulfate must be added to make 200. mL of a 0.200 M potassium sulfate solution are 6.96.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
No. of moles of solute = 0.04
Mass of potassium sulfate = 174.2 × 0.04
Mass of potassium sulfate = 6.96 grams
Therefore, Grams of potassium sulfate must be added to make 200. mL of a 0.200 M potassium sulfate solution are 6.96.
Learn more about Molarity, here:
https://brainly.com/question/8732513
#SPJ2
What are three ways to increase the rate of solvation.
Answers
Answer:
The rate of solvation is depends on temperature and surface area. Increasing the temperature of the solvent increases the rate of solvation. Increasing the surface area of the solute increases the rate of solvation. Also, agitating the system increases the rate of solvation.
Explanation:
hope this helps.
How many moles of 02 should be supplied to burn 1 mol of C3H8(propane) molecules in a camping stove?
Answers
Answer:
This tells you that when 1 mole of propane undergoes combustion, 3 moles of carbon dioxide are produced. You can thus say that when 2.0 moles of propane react, you will get 2.0moles C3H8 ⋅ 3.moles CO2 1mole C3H8 = 6.0 moles CO2
Explanation:
what is the color of indicator for battery acid, water, vinegar, soda pop, shower (ammonia) cleaner and liquid drain cleaner
Answers
A 2000 g sugar-water solution contains 200 g of sugar. The concentration of the solution by mass is
a. 1%
b. 9%
c. 10%
d. 12%
Answers
Answer: the answer is letter c which is 1 percent
Explanation:
How are gypsum and selenite chemically similar? What makes them different?
Answers
Answer:
Gypsum and Selenite have the same chemical composition but differ in crystallisation habit. Selenite is usually crystalline and the association of the impurities is superficial which are eliminated by washing. Gypsum is fine grained in nature and is beneficiated by flotation only.
How many aluminum atoms are found in 8.57 moles of aluminum?
Answers
Answer:
1.02 10 to the 23 power(or 100,000,000,000,000,000,000,000)
atoms of AL
Explanation:
ive had this question before
43. 5 g of cesium explosively reacts with water to form hydrogen gas and cesium hydroxide. How many moles of hydrogen gas were formed?
Answers
Answer:
See the attached images for solution.
Explanation:
If your sample of vinegar is approximately 4.76% (w/w), what volume should you use so that approximately 40 mL of 0.1 M NaOH is required to neutralize your sample of vinegar
Answers
Based on the concentrations given, the volume of vinegar required is 5.04 mL.
What is the concentration of the vinegar solution?The concentration of a solution is the amount of solute in a given volume of solution.
Concentration can be expressed as:
molar concentration percentage concentrationThe concentration of the vinegar solution is 4.76% (w/w). This means that 4.76 g of vinegar is present in 100 g of solution.
Mass of vinegar = 4.76 g
molar mass if vinegar = 60 g/mol
moles of vinegar = 4.76/60 = 0.0793 moles
volume of solution/water = 100 mL or 0.1 L
Molarity of vinegar = 0.0793/0.1 = 0.793 M
1 mole of vinegar reacts with 1 mole of NaOH
let the volume of vinegar required be V
0.793 M × V = 40 × 0.1
V = 4/0.793
V = 5.04 mL
Therefore, the volume of vinegar require is 5.04 mL.
Learn more about molarity at: https://brainly.com/question/26528084
where are transition metals found in the periodic table?
Answers
Answer:
Middle
Explanation:
Transition metals are located in the middle of the Periodic table from group 3 to group 11.
Hope this helped!
- profparis
C. A sample of copper is 4.46 moles. Determine how many atoms your piece of metal
Contains
Answers
Answer:
[tex]2.686*10^{24}[/tex]
Explanation:
Avogadro's number, 10 x 10^{23}, represens the number of atoms in a single mole of any substance.
Since we already of have the mole amount and don't need to calculate that from the grams of the substance, we can simply multiple Avogadro's number by the amount of moles given.
[tex]4.46 *(6.022*10^{23}) = 2.686 * 10^{24}[/tex]
Suppose you spill a few drops of sulfuric acid solution on your sleeve, but there is no visible harm. Can you be confident the fabric is safe
Answers
Answer:
No
as they are dispensed, during use, and as they are discarded
Explanation:
Suppose you spill a few drops of sulfuric acid solution on your sleeve, but there is no visible harm.
Can you be confident the fabric is safe?
No
The best way to protect yourself from such mishaps is to be mindful of the acid and base solutions
as they are dispensed, during use, and as they are discarded
How many hydrogen atoms (H’s) are there in the following compound: 5H20
A. 2
B. 10
C. 5
D. 20
Answers
Answer:
10 atoms
( 5 molecules )......
identify the particles that facilitate the electric conductivity of sodium metal
Answers
Answer:
Sodium metal will conduct electricity in both a solid and liquid state, due to 'a sea' of delocalised electrons which can move and are able to carry charge
Sodium metal will conduct electricity only when it is in a liquid state or in solution because of the ionic state which are free to move in this state, allowing them to carry charge and conduct electricity.
What are free electrons ?An electron within a conducting substance (as in a Sodium metal) but not permanently attached to any atom.
Sodium metal will conduct electricity only when it is in a liquid state or in solution because of the ionic state which are free to move in this state, allowing them to carry charge and conduct electricity.
It also have 'a sea' of delocalised electrons which can move and are able to carry charge.
Learn more about conductivity here ;
https://brainly.com/question/27391957
#SPJ2
what mass of NaNo3 is needed to make 400mL of a 0.3M solution? (molar mass = 84.99)
Answers
The formula for molarity is M=mols/liters
So mols = M*liters
Convert 400 mL to .4 L
.3M * .4L= .12 mols NaNo3
Now convert moles to grams
.12 mols * (84.99 g NaNo3/1 mol)
=10.1988 g of NaNo3
Why do metals tend to form cations and nonmetals tend to form anions?
Answers
Explanation:
here's the link to your answer
btly. 55/7
An unknown amount of gas has a volume of 12 L and a pressure of 5.6 atm. If the temperature is 205K, how many moles of gas are present
Answers
The number of moles of the gas present is 4 moles.
To calculate the numbers of moles of the gas present, we use the formula below.
Formula:
PV = nRT............. Equation 1Where:
P = PressureV = Volumen = Number of moles of the gasR = molar gas constantT = Temperature.Make n the subject of the equation
n = PV/RT............ Equation 2From the question,
Given:
P = 5.6 atmV = 12 LT = 205 KR = 0.0821 L.atm.K⁻¹.mol⁻¹Substitute these values into equation 2
n = (5.6×12)/(0.0821×205)n = 67.2/16.8305n = 3.99n ≈ 4 molesHence, the number of moles of the gas present is 4 moles.
Learn more about number of moles here: https://brainly.com/question/21911991