Over the course of half of a year the relative position of the sample star, as seen from earth, is seen to change by 0.400''. The parallax angle in this case is: 0.400''
Given that the relative position of the sample star as seen from earth is seen to change by 0.400'' over the course of half of a year. We are to determine the parallax angle in this case. Parallax angle (p) can be defined as the angle between the baseline and the line of sight to the star. It is the angle between two lines drawn from the star to the Earth, separated by six months, and viewed at a right angle to the baseline.
It is measured in seconds of arc (or arcseconds), and it is usually too small to measure directly. The parallax angle can be calculated using the formula below: parallax angle (p) = (d/b)
where d is the distance from the Earth to the star and b is the baseline, which is half of the distance that the Earth moves in its orbit over six months, which is equal to 1 astronomical unit (AU).
Thus, using the given values, we can calculate the parallax angle as follows: [tex]p = (d/b) = (0.400/1) = 0.400''[/tex]
Thus, the parallax angle, in this case, is 0.400'' (arcseconds). Therefore, the relative position of a star as seen from Earth changes with the change in the Earth's position. The change in position helps to determine the distance from the Earth to the star using the parallax angle.
To know more about parallax angles refer here:
https://brainly.com/question/20296211#
#SPJ11
what is the angular momentum of a 2.9- kg k g uniform cylindrical grinding wheel of radius 28 cm c m when rotating at 1500 rpm r p m ?
The angular momentum of a 2.9-kg uniform cylindrical grinding wheel of radius 28 cm when rotating at 1500 rpm is 1.18 kg m²/s. the angular momentum of the grinding wheel is 14.5 kg m²/s.
The formula for angular momentum is:
L = Iω
Where, L = angular momentum
I = moment of inertia
ω = angular velocity
First, we need to find the moment of inertia of the grinding wheel.
The moment of inertia of a uniform cylinder is given by:
I = (1/2)mr²
Where,m = mass of the cylinder (2.9 kg)
r = radius of the cylinder (28 cm = 0.28 m)
So, I = (1/2)(2.9 kg)(0.28 m)²
I = 0.092 kg m²
Now, we can find the angular momentum:
L = Iω
ω = angular velocity = 1500 , rpm = 157.08 rad/s (1 revolution = 2π radians, so 1500 rpm = 1500/60 = 25
revolutions per second = 25 × 2π = 157.08 radians per second)
L = (0.092 kg m²)(157.08 rad/s)L
= 14.5 kg m²/s.
for such more question on angular momentum
https://brainly.com/question/4126751
#SPJ11
a 30kg mass is placed on a 15cm spring and compressed to 12cm how much work is required to compress spring from 12cm to 10 cm
The final answer are work required to compress the spring from 12 cm to 10 cm is 19.6 J.
The spring's energy and the work it does are both proportional to the amount it stretches or compresses. According to Hooke's Law, the force needed to stretch or compress a spring is proportional to the amount it is stretched or compressed.
Given the spring constant and the total energy stored in the spring, one may figure out how much energy is necessary to compress the spring from a particular point to another using this method. What is the work required to compress the spring from 12 cm to 10 cm?
The work required to compress the spring from 12 cm to 10 cm is calculated using the following formula; W=1/2 k (x_2^2 - x_1^2) where W is the work done by the spring ,k is the spring constant,x1 is the initial position, andx2 is the final position.
Determine the spring constant using the formula, F=kx k=\frac{F}{x}k=\frac{mg}{x} k=\frac{30*9.8}{0.15} k=1960\ N/m Since the spring is being compressed, the value of x2 is smaller than x1.
To find the value of work done by the spring when compressed from x1 to x2, the difference between the potential energies corresponding to these positions is taken.
Thus, the work done by the spring is: W=1/2 k (x_2^2 - x_1^2) W=1/2 (1960) (0.12^2 - 0.10^2) W=19.6\ J
Thus, the work required to compress the spring from 12 cm to 10 cm is 19.6 J.
To know more about spring refer here:
https://brainly.com/question/14670501#
#SPJ11
pure water is in a sealed container held at a pressure 25 [bar]. the specific volume is 1.0784 x 10-3 [m3/kg]. which answer best describes the temperature of the water at this condition?
The temperature of the water is approximately 249 [℃].
The temperature of the water in the sealed container held at a pressure of 25 [bar] and with a specific volume of 1.0784 x 10-3 [m3/kg] can be determined using a steam table or thermodynamic software.
Based on the steam table, at 25 [bar], the saturation temperature of water is approximately 220 [℃]. However, since the specific volume of the water is higher than the specific volume at the saturated state, the water is in a superheated state.
To determine the exact temperature, we need to use the superheated steam table, which gives the thermodynamic properties of superheated water or steam.
Using this table, we can find that the temperature of the water is approximately 249 [℃]. Therefore, the answer is 249 [℃], and the explanation is that the water is in a superheated state, and its temperature can be determined from the superheated steam table.
For more questions like Water click the link below:
https://brainly.com/question/28465561
#SPJ11
the figure shows a 7.8 kg stone at rest on a spring. the spring is compressed 10 cm by the stone. what is the spring constant?
The spring constant is -764.4 N/m, which can be calculated by using the formula: k = -F/x, where k denotes the spring constant.
The following formula can be used to get the spring constant:
k = -F/x,
where k is the spring constant, F denotes the force, and x denotes the change in spring length.
In this case, the force F is the weight of the stone, which is 7.8 kg multiplied by the acceleration due to gravity g which is 9.8 m/s². Therefore, F = 7.8 kg × 9.8 m/s² = 76.44 N.
The spring is compressed by 10 cm which is 0.1 m.
When the formula's values are substituted, we obtain:
k = -F/x
= -76.44 N/0.1 m
= -764.4 N/m.
Therefore, the spring constant is -764.4 N/m.
As seen by the negative sign, the restoring force is acting in the opposite direction to that of the applied force.
To know more about the spring constant, refer:
https://brainly.com/question/28196422
#SPJ4
one of the forks is known to vibrate at 588.0 hz. what are the possible vibration frequencies of the second tuning fork?
The other tuning fork will vibrate at either 293.0 Hz or 884.0 Hz, as these are the two frequencies that are an octave away from 588.0 Hz.
Assuming that the second tuning fork is identical to the first one, the possible vibration frequencies of the second tuning fork can be determined based on the principle of resonance.
When two tuning forks of the same frequency are placed near each other, the sound waves produced by one fork will cause the other fork to vibrate at the same frequency, resulting in a resonance effect.
The frequency of the first tuning fork is given as f1 = 588.0 Hz.
The frequency of the second tuning fork (f2) that will produce resonance with the first tuning fork can be calculated using the formula:
f2 = nf1
where n is a positive integer (1, 2, 3, ...) representing the harmonic number.
Therefore, the possible vibration frequencies of the second tuning fork are:
For n = 1, f2 = 1 × 588.0 Hz = 588.0 Hz
For n = 2, f2 = 2 × 588.0 Hz = 1176.0 Hz
For n = 3, f2 = 3 × 588.0 Hz = 1764.0 Hz
and so on.
Note that in practice, the second tuning fork may not be identical to the first one, and there may be slight variations in the vibration frequencies due to factors such as manufacturing tolerances, temperature, and humidity.
Learn more about vibration frequencies at: https://brainly.com/question/26082584
#SPJ11
The possible vibration frequencies of the second tuning fork are 1176 H.
What is a tuning fork?A tuning fork is a tool that produces a pure musical tone when struck. The tone is usually the musical note that corresponds to the tool's vibration frequency. The tines on a tuning fork are constructed of a long steel rod that has been forged into the shape of a U. The tines are then cut to the proper length and shape to allow them to vibrate at a certain frequency.
One of the forks is known to vibrate at 588.0 Hz. The possible vibration frequencies of the second tuning fork are multiples of 588.0 Hz. When two tuning forks are struck, they will vibrate in sympathy with one another if their vibration frequencies are the same or a multiple of the same frequency. Therefore, the possible vibration frequencies of the second tuning fork are 588.0 Hz × 2 = 1176 Hz.
For more information about tuning fork refers to the link: https://brainly.com/question/13032605
#SPJ11
how much electrical energy is converted to light and thermal energy by a 200 w lightbulb in one day?
A 200 W lightbulb will convert approximately 24 kWh of electrical energy to light and thermal energy in one day.
This is calculated using the following formula: Energy (kWh) = Power (kW) x Time (hours): 24 kWh = 0.2 kW x 120 hours (assuming the lightbulb is on for 12 hours each day).
Electrical energy is a type of energy that results from the flow of electric charge. It is a form of energy that is transferred when an electric current flows through a wire or conductor, and it is typically measured in units of joules (J) or kilowatt-hours (kWh).
Thermal energy, on the other hand, is the energy that is associated with the temperature of a substance. It is a form of internal energy that is present in all substances, and it can be transferred from one substance to another through conduction, convection, and radiation.
Read more about the topic energy:
https://brainly.com/question/13881533
#SPJ11
heat engine accepts heat at a rate of 200 kw, and it produces a net power output of 50 kw. determine the thermal efficiency of this engine.
The thermal efficiency of this engine is calculated by taking the net power output of 50 kW and dividing it by the amount of heat input of 200 kW. Thus, the thermal efficiency of this engine is 25%.
The thermal efficiency of a heat engine is defined as the ratio of the net power output of the engine to the heat input. In this case, the heat engine is accepting heat at a rate of 200 kW and producing a net power output of 50 kW.
To calculate the thermal efficiency, we use the following equation: Thermal Efficiency = Net Power Output/Heat Input In this case, the net power output is 50 kW and the heat input is 200 kW. Therefore, the thermal efficiency of this engine is equal to 0.25 or 25%. It is important to note that the thermal efficiency of a heat engine is affected by several factors, such as the efficiency of the engine itself, the temperature of the heat source, the temperature of the heat sink, and the type of energy conversion being performed. Therefore, the thermal efficiency of any engine may vary from one situation to another.
For more questions related to thermal efficiency.
https://brainly.com/question/13039990
#SPJ11
1. Which graphic organizer best compares the energy inputs and outputs of cellular respiration and photosynthesis? Chemical energy. Cellular respiration. Thermal energy. Photosynthesis. Light energy. Light energy. Photosynthesis. Chemical energy. Cellular respiration. Chemical energy. Chemical energy. Photosynthesis. Thermal energy. Cellular respiration. Chemical energy. Light energy. Cellular respiration. Chemical energy. Photosynthesis. Thermal energy.
The best sources of energy are light, photosynthesis, chemicals, cellular respiration, and chemicals. the energy inputs and outputs of photosynthesis and cellular respiration are compared.
What exactly does energy mean?The capability to do tasks is how energy is most frequently defined. In other words, energy is a property of everything that can accomplish work. Making or producing change is another name for conducting work in the context of energy. With every act of labor, energy is either changed or transferred.
Why does energy exist?Energy is a word that denotes a property of matter & non-matter fields; it is not a substance in and of itself. For instance, it is argued that matter has kinetic energy when it moves quickly. Potential energy can take many different forms.
To know more about Energy visit:
https://brainly.com/question/1932868
#SPJ1
how to use the charge of a single electron to determine the number of extra electrons on a negatively charged object
The charge of a single electron to determine the number of extra electrons on a negatively charged object is used by Coulombs.
Аn object is mаde of аtoms which hаve protons (positive chаrge pаrticle), electrons (negаtive chаrge pаrticle) аnd neutrons (neutrаl chаrge pаrticle). Electrons аre subаtomic elementаry pаrticles thаt orbit the nucleus of аtoms. Electrons cаrry а negаtive chаrge of 1.6 × [tex]10^{-19}[/tex] C, whose mаgnitude is the sаme аs the mаgnitude of the chаrge cаrried by а proton. Electron interаctions give rise to most of the fields of Chemistry.
Coulomb is the unit used to quаntify chаrge. A Coulomb is equivаlent to the chаrge cаrried by 1.6 × [tex]10^{-19}[/tex] protons.
For more information about electron refers to the link: https://brainly.com/question/1255220
#SPJ11
how fast would a(n) 73 kg k g man need to run in order to have the same kinetic energy as an 8.0 g g bullet fired at 400 m/s m / s ?
The 73 kg man would need to run at approximately 5.92 m/s to have the same kinetic energy as an 8.0 g bullet fired at 400 m/s.
The kinetic energy (KE) of an object is given by the formula KE = (1/2)mv^2, where m is the mass of the object and v is its velocity.
To calculate the velocity of the 73 kg man, we can set his kinetic energy equal to that of the 8.0 g bullet, which is:
[tex]KE_bullet = (1/2)mv^2 = (1/2)(0.008 kg)(400 m/s)^2 = 640 J[/tex]
Now we can solve for the velocity (v) of the 73 kg man by setting his kinetic energy equal to 640 J:
[tex]KE_man = (1/2)mv^2 = 640 J(1/2)(73 kg)v^2 = 640 Jv^2 = 640 J x 2 / 73 kgv^2 = 35.068v = sqrt(35.068) = 5.92 m/s[/tex]
Therefore, the 73 kg man would need to run at approximately 5.92 m/s (21.3 km/h or 13.2 mph) to have the same kinetic energy as an 8.0 g bullet fired at 400 m/s.
To know more about kinetic energy click here:
https://brainly.com/question/26472013
#SPJ11
you are sitting in a closed room with no windows. the only light in the room originates from two identical bare, incandescent light bulbs. one is located on the wall to your left; and the other is located on the wall to your right. bored, you look up at the ceiling and realize there is no interference pattern. why is there no interference pattern?
No stable interference pattern is formed on the ceiling.
Instead, you would see a simple combination of the light emitted by both bulbs, creating a uniformly lit ceiling.
The absence of an interference pattern in the scenario you described is due to the nature of the light sources and the way they emit light.
Incandescent light bulbs emit incoherent light, which means the light waves from these bulbs are not in phase with each other.
An interference pattern is created when two coherent light sources, like lasers, emit light waves that are in phase with each other.
When these light waves meet, they create a pattern of constructive and destructive interference.
Constructive interference occurs when the crests (or high points) of two light waves align, resulting in a brighter area, while destructive interference occurs when the crest of one wave aligns with the trough (or low point) of another wave, resulting in a darker area.
This alternating pattern of bright and dark areas is known as an interference pattern.
However, in your scenario with two incandescent light bulbs, the light waves emitted by each bulb are incoherent, meaning they have random phases and do not align consistently.
For similar question on interference.
https://brainly.com/question/2166481
#SPJ11
(10.04 mc) determine the best reason for the summation from n equals 1 to infinity of negative 1 to the n power times n squared over quantity 3 times n squared minus 1 end quantity diverging.
The best reason for the summation from n equals 1 to infinity of (-1)^n * n^2 / (3n^2 - 1) diverging is because the terms do not approach zero as n approaches infinity.
1. Examine the given summation: Σ((-1)^n * n^2 / (3n^2 - 1))
2. Analyze the expression inside the summation as n approaches infinity:
(-1)^n * n^2 / (3n^2 - 1)
3. Observe that the numerator, (-1)^n * n^2, oscillates between positive and negative values due to (-1)^n term.
4. Notice that the denominator, (3n^2 - 1), approaches infinity as n approaches infinity since it's a quadratic function with a positive coefficient for the highest power term (3n^2).
5. However, the overall fraction does not approach zero because the numerator (n^2) also approaches infinity as n approaches infinity, and its oscillation between positive and negative values prevents a limit of zero.
In conclusion, the best reason for the given summation diverging is that the terms do not approach zero as n approaches infinity.
To know more :
https://brainly.com/question/30366541
#SPJ11
x rays with initial wavelength 0.0679 nm undergo compton scattering. at which scattering angle is this wavelength observed?
The wavelength observed after Compton scattering for x-rays with an initial wavelength of 0.0679 nm is observed at a scattering angle of 140.0°.
Compton scattering is the interaction of a photon with an atomic electron that results in a decrease in the photon's energy and an increase in the scattered photon's wavelength.
The change in wavelength of the scattered photon can be calculated using the formula:
λ = λ0/(1 + (λ0/h)*(1-cosθ)), where λ0 is the initial wavelength, h is Planck's constant, and θ is the scattering angle.
Given initial wavelength λ0 = 0.0679 nm and Planck's constant h = 6.63*10^-34 J*s.
λ0 = 0.0679 nm = 6.79×10^-11 m
h = 6.63×10^-34 J·s
[tex]λ = λ0/(1 + (λ0/h)(1-cosθ))λ = 6.79×10^-11/(1 + (6.79×10^-11/6.63×10^-34)(1-cosθ))λ = λ06.79×10^-11/(1 + (6.79×10^-11/6.63×10^-34)*(1-cosθ)) = 6.79×10^-111 + (6.79×10^-11/6.63×10^-34)*(1-cosθ) = 1/(6.79×10^-11)cosθ = 1 - (1/(1 + (6.79×10^-11/6.63×10^-34)*(1/(6.79×10^-11))))cosθ = 0.252θ = cos^-1(0.252)θ = 140.0°[/tex]
Therefore, the wavelength observed after Compton scattering for x-rays with an initial wavelength of 0.0679 nm is observed at a scattering angle of 140.0°.
To know more about the scattering angle click here:
https://brainly.com/question/29806315
#SPJ11
suppose we have a 1-m and a 3-m diameter telescope. how does the light gathering power of the 3-m telescope compare to the 1-m telescope?
The light-gathering power of the 3-m diameter telescope compared to the 1-m telescope is 9 times.
The аmount of light cаptured by а telescope's primаry mirror is known аs its light-gаthering power. The аmount of light the mirror cаn collect is proportionаl to the squаre of its diаmeter.
The formulа for the light-gаthering power of а telescope is:
(Diаmeter of Telescope)²
For exаmple, if а 2-meter telescope аnd а 4-meter telescope аre compаred, the lаtter will be four times more powerful becаuse (4/2)² = 4.
Therefore, а 3-meter diаmeter telescope's light-gаthering power compаred to а 1-meter diаmeter telescope is (3/1)² = 9 times more powerful.
For more information about light gathering power refers to the link: https://brainly.com/question/14664157
#SPJ11
Lebohang says that when you use a thick syringe to "drive" a thin syringe, you lose strength but gain distance. What do you think
Lebogang says that when you use a thick syringe to "drive" a thin syringe, you lose strength but gain distance. Jaamiah disagrees this means that there is indeed a mechanical advantage, but a distance disadvantage.
A syringe is a medical device that is used for injecting liquids into or extracting liquids from the body. It typically consists of a cylindrical barrel, a plunger, and a needle. The barrel is usually made of plastic or glass and is marked with volume measurements. The plunger fits inside the barrel and can be pushed or pulled to draw or expel liquid. The needle is attached to the end of the barrel and is used to penetrate the skin or other tissue to inject or extract the liquid.
Syringes are commonly used in medical settings for a variety of purposes, such as administering vaccines, medications, or anesthesia. They can also be used to remove fluid from the body, such as in the case of draining abscesses or collecting blood samples for testing.
To learn more about Syringe visit here:
brainly.com/question/20320556
#SPJ4
Complete Question: -
Lebogang says that when you use a thick syringe to "drive" a thin syringe, you lose strength but gain distance. Jaamiah disagrees. She says that you gain both distance and strength. What do you think, and why do you think so?
what is ceq of three capacitors, each of capacitance c, if they are connected to a battery (a) in series with one another and (b) in parallel? (c) in which arrangement is there more charge on the equivalent capacitance?
a. The [tex]C_{eq}[/tex] of three capacitors, if they are in series with one another, is [tex]\frac{C}{3}[/tex].
b. The [tex]C_{eq}[/tex] of three capacitors if they are in parallel with one another is C3.
d. The parallel arrangement will end up having more charge on the equivalent capacitance [tex]C_{eq}[/tex].
Using the formulаe for the equivаlent cаpаcitаnce, for cаpаcitors is in series аnd pаrаllel, we cаn find the equivаlent cаpаcitаnce for series аnd pаrаllel аrrаngement respectively.
Formulae:
If three capacitors are in series, the equivalent capacitance is given by,
[tex]\frac{1}{C_{eq} }[/tex] = ∑[tex]\frac{1}{C}[/tex] ..... (1)
If three capacitors are in parallel, the equivalent capacitance [tex]C_{eq}[/tex] is given by,
[tex]C_{eq}[/tex] = ∑C ... (2)
The charge between the plates of the capacitor, q = CV ... (3)
First, we calculate the equivalent capacitance with the capacitors in series. We are given that capacitance on each capacitor is given by, [tex]C_{1}[/tex] = [tex]C_{2}[/tex] = [tex]C_{3}[/tex] = C
Thus, the equivalent capacitance [tex]C_{eq}[/tex] of these capacitors in series is given by:
[tex]\frac{1}{C_{eq} }[/tex] = [tex]\frac{3}{C}C_{eq}[/tex] = [tex]\frac{C}{3}[/tex]
Therefore, the equivalent capacitance [tex]\frac{1}{C_{eq} }[/tex] is [tex]\frac{C}{3}[/tex].
Second, we calculate the equivalent capacitance with the capacitors in parallel. We are given that capacitance on each capacitor is given by, [tex]C_{1}[/tex] = [tex]C_{2}[/tex] = [tex]C_{3}[/tex] = C
Thus, the equivalent capacitance [tex]\frac{1}{C_{eq} }[/tex] of these capacitors in series is given by:
[tex]\frac{1}{C_{eq} }[/tex] = C + C + C = 3C
Therefore, the equivalent capacitance [tex]\frac{1}{C_{eq} }[/tex] is 3C.
Third, we calculate the equivalent capacitance that has more charge. If capacitors are in series, then we get the charge using equivalent capacitance in series using equation (iii) as follows:
q = [tex]\frac{1}{3}CV[/tex]
If capacitors are in parallel, then we get the charge using equivalent capacitance in series using equation (iii) as follows:
q = 3CV
Therefore, we cаn sаy thаt the pаrаllel will end up hаving more chаrge on the equivаlent cаpаcitаnce.
For more information about equivаlent cаpаcitаnce refers to the link: https://brainly.com/question/28445252
#SPJ11
the first simple electric motor and the first dynamo for generating electricity were both invented by
Answer: The first simple electric motor and the first dynamo for generating electricity were both invented by Michael Faraday.
Michael Faraday was a British physicist and chemist who lived from 1791 to 1867. In 1821, he created the first basic electric motor, which utilized a wire carrying a current placed inside a magnetic field, resulting in a rotary motion.
Faraday discovered electromagnetic induction in 1831 and developed the first electric dynamo, which used electromagnetic induction to transform mechanical energy into electrical energy. Faraday's findings laid the groundwork for modern electrical engineering and power generation.
Learn more about Michael Faraday here:
https://brainly.com/question/1869582#
#SPJ11
how hard would dave have to push in order to get the fridge moving to the left (initial moment)? assume that john continues to apply a 210 n n force to the right.
In order to move the fridge to the left, Dave would have to push with a force of at least 210 N to the left, in the opposite direction of the force that John is pushing in. This is because the two forces (John's pushing to the right and Dave's pushing to the left) must be of equal magnitude and opposite direction in order for the fridge to move in the desired direction.
The magnitude of Dave's pushing force must be equal to or greater than John's, which is 210 N. This is because forces in opposite directions cancel each other out; therefore, the net force acting on the fridge must be equal to or greater than the magnitude of John's pushing force, 210 N.
In order for the fridge to start moving initially, Dave's pushing force must be greater than zero. This is because for the fridge to begin to move, the net force acting on the fridge must be greater than zero. A pushing force of 210 N to the left by Dave is the minimum force required to make the fridge start moving to the left.
for such more question on force
https://brainly.com/question/12785175
#SPJ11
Two weights are connected by a massless wire and pulled upward with a constantspeed of 1.50 m/s by a vertical pull P. The tension in the wire is T(see figure). Whichone of the following relationships between Tand Pmust be true?A)TB)T=PC)P+T=125ND)P=T+25N
Two weights are connected by a massless wire and pulled upward with a constant speed of 1.50 m/s by a vertical pull P. The tension in the wire is T The relationship between T and P is that T = P + 125N, which is equivalent to answer choice D. The correct answer is D) P=T+25N.
This can be determined by analyzing the forces acting on the system. Since the weights are being pulled upward at a constant speed, the net force acting on them must be zero.
The forces acting on the weights are their respective weights (mg), where m is the mass of the weight and g is the acceleration due to gravity, and the tension in the wire (T). The vertical pull P also acts on the system.
Using Newton's second law (F=ma) and setting the net force equal to zero, we can write:
T - m1g - m2g - P = 0
Solving for T, we get:
T = m1g + m2g + P
Substituting in the given values of m1, m2, and g, we get:
T = 50N + 75N + P
Simplifying, we get:
T = P + 125N
For more such questions on tension
https://brainly.com/question/30592298
#SPJ11
a 0.105-kg hockey puck moving at 30 m/s is caught and held by a 61-kg goalie at rest. with what speed does the goalie slide on the ice?
A 0.105-kg hockey puck moving at 30 m/s is caught and held by a 61-kg goalie at rest. The Speed at which the goalie slide on the ice is 0.0517 m/s.
A 0.105-kg hockey puck moving at 30 m/s is caught and held by a 61-kg goalie at rest.
The velocity of the goalie is given. In the problem, the momentum of the hockey puck is defined as 0.105 kg x 30 m/s = 3.15 kg*m/s.
The law of conservation of momentum claims that the sum of the momenta of two objects is conserved throughout the collision.
Momentum is always conserved, but the total energy in the system is not (since some energy is lost as sound, heat, and deformation of the objects during a collision).
This is given as the initial momentum of the puck, and since the total momentum of the system is conserved, the momentum of the puck after the collision is zero since the goalie is at rest.
The total momentum of the system is calculated using conservation of momentum principles.
Using the conservation of momentum law, the velocity of the goalie can be calculated, which is given by:
[tex]$$\begin{aligned} 0.105 \text{ kg}\times 30 \text{ m/s} &= (0.105 \text{ kg}+61 \text{ kg}) \times v \\ 3.15 \text{ kg}\cdot \text{m/s} &= 61.105 \text{ kg}\times v \\ \frac{3.15 \text{ kg}\cdot \text{m/s}}{61.105 \text{ kg}} &= v \approx 0.0517 \text{ m/s} \end{aligned}$$.[/tex]
The goalie's velocity is 0.0517 m/s, which is a very modest speed.
Thus, the answer to the given problem is 0.0517 m/s, which is the velocity of the goalie.
To know more about Hockey puck refer here:
https://brainly.com/question/21082526#
#SPJ11
what is the impulse experienced by a 65.8 kg halfback encountering a force of 1025 n for 0.350 seconds?
The 65.8 kg halfback experienced an impulse of 359 Ns when subjected to a force of 1025 N for a duration of 0.350 seconds.
The formula for impulse is given below:
Impulse = force × time
Where F is the force applied on the object.
t is the time for which the force is applied.
"I" is the impulse experienced by the object.
Substituting the given values,
Force (F) = 1025 N Time (t ) = 0.350 s Impulse I = ?
Impulse = force × time
I = F × t
I = 1025 × 0.350
I = 358.75 Ns or 359 Ns
The impulse experienced by a 65.8 kg halfback encountering a force of 1025 N for 0.350 seconds is 359 Ns.
To know more about the "impulse": https://brainly.com/question/2193212
#SPJ11
if the position is 2 m, 30 degrees above the horizontal and to the south, and the force is 3 n, horizontal (neither up nor down) and to the west, then what is the magnitude of the torque?
If the position is 2 m, 30 degrees above the horizontal and to the south, and the force is 3 n, horizontal (neither up nor down) and to the west, then The magnitude of the torque in this scenario is 6 Nm.
The magnitude of the torque in this scenario is determined by calculating the cross product of the position vector and the force vector.
The position vector is given by r = 2m (30° south of the horizontal) and the force vector is given by F = 3N (west).
To calculate the cross product of these two vectors, we can use the formula:
Torque = r x F = |r||F| sin&theta,
where &theta is the angle between the vectors.
In this scenario, the angle between the position vector and the force vector is 90°.
Therefore, the magnitude of the torque can be calculated as follows:
Torque = |r||F|sin90° = (2m)(3N)(1) = 6 Nm.
for such more question on magnitude
https://brainly.com/question/24256733
#SPJ11
how to calculate rotational velocity of a ping pong ball based on the angle it collides with the paddle
To calculate the rotational velocity of a ping pong ball based on the angle it collides with the paddle, the following formula is used:
Rotational velocity = 2π (d/t)
Where d is the distance from the center of the ball to the point of impact and t is the time it takes for the ball to complete one rotation around its axis after the impact.
Assuming that the ball is hit at an angle of θ with the paddle, the distance d is given by
d = r sin θ,
Where r is the radius of the ball.
The time t can be estimated by dividing the period of rotation of the ball by the number of rotations it completes in that time. If the period is T and the number of rotations is n, then t = T/n. Therefore, the rotational velocity can be calculated as:
Rotational velocity = 2π (r sin θ / (T/n))
= 2πn (r sin θ / T)
Note that the period T depends on the angular velocity of the ball, which is related to its linear velocity v by the equation T = 2π r / v.
Therefore, the formula for rotational velocity can also be written as:
Rotational velocity = 2πn (sin θ / v)
To know more about "Rotational velocity": https://brainly.com/question/29221159
#SPJ11
a scuba diver and her gear displace a volume of 69.6 l and have a total mass of 72.8 kg. a) what is the buoyant force on the diver in seawater?
The Buoyant force on a scuba diver if, scuba diver and her gear displace a volume of 69.6 and have a total mass of 72.8 kg is 70.86 N.
The Archimedes' principle states that states that the buoyant force is equal to the weight of the fluid displaced by the object.
So, the buoyant force on the diver can be calculated as follows:
Buoyant force = Weight of fluid displaced
It can also be written as
Buoyant force = Density of fluid × Volume of fluid displaced × gravitational acceleration
In seawater, the density is typically about 1025 kg/m³.
First, convert the volume from liters to cubic meters.1 liter = 0.001 m³
69.6 liters = 69.6 × 0.001 = 0.0696 m³
So, the volume of seawater displaced by the diver is 0.0696 m³.
Now, we can calculate the buoyant force.
Buoyant force = 1025 kg/m³ × 0.0696 m³ × 9.81 m/s²
Buoyant force = 70.86 N
Therefore, the buoyant force on the diver in seawater is 70.86 N.
To know more about the 'buoyant force':
https://brainly.com/question/28464280
#SPJ11
consider a waterslide that has a vertical drop of h1. at the bottom of the slide the person is leaving the slide horizontally, where the end of the slide is h2 above the water. ignore friction and air resistance to find the distance, l, from the end of the slide a person will land in terms of h1 and h2
To find the distance, L, from the end of the slide a person will land in terms of h1 and h2,
1. First, calculate the initial velocity of the person as they leave the slide. Since we are ignoring friction and air resistance, we can use the conservation of mechanical energy principle. The potential energy at the top of the slide will be converted into kinetic energy at the bottom.
So, mgh1 = 0.5mv^2,
where m is the mass, g is the acceleration due to gravity, and v is the initial velocity.
The mass cancels out, leaving us with:
v^2 = 2gh1
2. Next, calculate the time it takes for the person to fall the vertical distance h2. Since the only force acting on the person is gravity, we can use the equation of motion: h2 = 0.5gt^2, where t is the time it takes to fall.
Solving for t:
t = √(2h2/g)
3. Finally, to find the horizontal distance L, we multiply the initial horizontal velocity by the time it takes to fall. Since the person is leaving the slide horizontally, their initial horizontal velocity is the same as the initial velocity calculated in step 1:
L = vt
L = (√(2gh1)) * (√(2h2/g))
By combining these steps, we find that the distance L from the end of the slide a person will land is L = (√(2gh1)) * (√(2h2/g)).
To Learn more :
https://brainly.com/question/14310656
#SPJ11
blood flows with a speed of 30 cm/s along a horizontal tube with a cross-section diameter of 1.6 cm. what is the blood flow speed in the part of the same tube that has a diameter of 0.8 cm?
Blood flows with a speed of 30 cm/s along a horizontal tube with a cross-section diameter of 1.6 cm.The speed of blood flow in the part of the same tube that has a diameter of 0.8 cm is 15 cm/s.
To arrive at this answer, we can use the formula for the flow rate of a fluid in a pipe:
Q = A × V
where Q is the flow rate, A is the cross-sectional area of the pipe, and V is the velocity of the fluid.
Therefore, if we substitute the values for A and V of the first section, we can calculate the flow rate for that section:
Q1 = A1 × V1
Q1 = π ×(1.6 cm/2)² × 30 cm/s
Q1 = 24.72 cm³/s
Now we can use the flow rate and the cross-sectional area of the second section to calculate the velocity of the fluid:
Q1 = A2 × V2
V2 = Q1 / A2
V2 = 24.72 cm³/s / (π × (0.8 cm/2)²)
V2 = 15 cm/s
for such more question on speed of blood flow
https://brainly.com/question/29483484
#SPJ11
if the air temperature is 28 degrees celsius, what is the fundamental resonance in an open tube that is 35 cm long? (ignore end correction)
The fundamental resonance of an open tube that is 35 cm long, when the air temperature is 28°C, is 167.53 Hz.
To calculate this, use the equation f = c/(2L) , where f is the frequency, c is the speed of sound, and L is the length of the tube. Since the speed of sound at 28°C is 331.45 m/s, the frequency can be calculated as f = 331.45/(2*0.35) = 167.53 Hz.
The fundamental resonance of an open tube that is 35 cm long when the air temperature is 28 degrees Celsius is around 297.5 Hz. This can be calculated using the following formula: f = (v x L) / (4 x L) where f is the frequency of the fundamental resonance, v is the speed of sound in air and L is the length of the tube.
The speed of sound in air is approximately 343 m/s, so for an open tube that is 35 cm long the fundamental resonance will be 297.5 Hz. This means that if the tube is excited with a frequency close to 297.5 Hz, the air inside the tube will vibrate in resonance and produce a loud sound.
The frequency of the fundamental resonance will change with changes in the temperature of the air. As the temperature of the air increases, the speed of sound also increases. This means that if the air temperature were higher than 28 degrees Celsius, the fundamental resonance of the tube would also be higher than 297.5 Hz.
For more questions related to resonance.
https://brainly.com/question/29547999
#SPJ11
a galvanic cell runs for 1.0 minute with a current of 0.25 a. how much charge passed through the cell in that time? (f
Answer : The amount of charge that passed through the galvanic cell in 1.0 minute with a current of 0.25 A is 15 Coulombs (C). This is a measure of the quantity of electrical charge, equivalent to the charge carried by approximately 6.24 x 10^18 electrons.
A galvanic cell, also known as a voltaic cell, is a device that generates electrical energy from a chemical reaction. The cell consists of two electrodes, an anode and a cathode, that are immersed in an electrolyte solution. In a galvanic cell, electrons flow from the anode to the cathode, creating a current that can be used to power external devices.
To calculate the amount of charge that passed through the galvanic cell in 1.0 minute with a current of 0.25 A, we can use the formula:
Q = I x t
Where Q is the amount of charge, I is the current, and t is the time.
Substituting the values given in the problem, we get:
Q = 0.25 A x 60 s = 15 C
Know more about electrical charge here:
https://brainly.com/question/16909192
#SPJ11
consider the interaction between a large cannon and the cannonball that it fires. during the explosion, which object experiences the greatest force?
When a large cannon and the cannonball that it fires interact during an explosion, the cannonball experiences the greatest force.
A cannonball and a large cannon will be involved in a collision when a cannon fires. A cannonball leaves a cannon at a velocity determined by the amount of gunpowder in the cartridge and the length of the barrel. When a cannonball leaves a cannon, it is subjected to two opposing forces: the force of the powder behind it and the force of air resistance in front of it.
The cannonball will experience the greatest force because it is lighter than the cannon. The force of the powder in the cartridge is used to propel the cannonball through the barrel of the cannon. The cannon experiences a smaller force than the cannonball because it is heavier than the cannonball.
Learn more about cannonball at https://brainly.com/question/31058895
#SPJ11
what physical changes occur to a wave's speed (s), wavelength (l), height (h), and steepness (h/l) as the wave moves across shoaling water to break on the shore?
Wave speed (S) decreases, wavelength (L) decreases, height (H) increases, and wave steepness ([tex]\frac{H}{L}[/tex]) increases when the wave moves across shoaling water to break on the shore.
What is wave speed ?The distance a wave travels in a given amount of time, such as the number of meters per second, is referred to as its wave speed. The equation Speed = Wavelength x Frequency relates wave speed to wavelength and frequency. When the wavelength and frequency are known, this equation can be used to calculate wave speed.
to know more about wave speed , visit ;
brainly.com/question/10715783
#SPJ1