The formatting of the question is a bit scrambled: I'm not sure if there are separate steps that have been unintentionally consolidated into a seemingly discrete step, nor am I sure which letters actually correspond with which step(s). So, for clarity's sake, I treated every sentence as its own step and arranged all of them accordingly. Hopefully, you can then reorganize them according to the labeled steps as you have been provided.
Suspend a separatory funnel using an iron ring and ring stand. Make sure the stopcock is closed. Transfer the organic (dichloromethane) layer to the funnel. Add an equivalent volume of aqueous acid to the dichloromethane layer in the separatory funnel. Cap the separatory funnel with a glass or Teflon stopper. Remove the funnel from the iron ring and shake vigorously to mix the layers, periodically venting to release pressure. Place the separatory funnel back in the Iron ring. Allow the layers to physically separate in the funnel. Remove the cap.Drain the bottom layer into a labeled beaker. Label the beaker "Organic Layer". Drain the remaining liquid into a labeled beaker. Label this beaker "Aqueous Layer". Transfer the "Organic Layer" back to the empty separatory funnel. Repeat all steps.Notes:
The letters have been replaced with numbers only to clarify the order of the steps. No changes were made to the steps themselves, including any stylistic errors.A very few set of sequential steps might be interchangeable, but the steps as separated and organized above is in accordance with standard liquid-liquid extraction protocol.Determining which layers are the "organic" and "aqueous" layers (i.e., whether the organic/aqueous layer, or vice-versa, is on the bottom/top ) is a nontrivial step; for this reason, when actually doing such extractions, the beakers (or whatever vessel) into which the layers are drained at any step are sometimes labeled "top layer" and "bottom layer" in case you misidentify which layers are, in fact, the organic and aqueous layers. Oftentimes, the organic layer is on top of the aqueous layer as many common organic solvents are less dense than water. Halogenated organic solvents, like dichloromethane, are one of the exceptions, and so will generally comprise the bottom layer.Calculate the minimum volume of oxygen
that is required for the complete combustion
of a mixture of 20cm3 of CO and 25cm3 of
hydrogen.
A. 45 cm3
B. 22.5cm3
C. 20 cm3
D. 10 cm3
Question 15
4 pts
Using the equation:
HgO --> Hg + O2
If 7.543 grams of HgO decompose, how many grams of oxygen are formed?
Answer:
1.184 g
Explanation:
The effectiveness of nitrogen fertilizers depends on both their ability to deliver nitrogen to plants and the amount of nitrogen they can deliver. Four common nitrogen-containing fertilizers are ammonia, ammonium nitrate, ammonium sulfate, and urea [(NH2)NH2) 2CO2CO)]. Rank these fertilizers in terms of the mass percentage nitrogen they contain. Rank fertilizers from largest to smallest mass percentage nitrogen they contain. To rank fertilizers as equivalent, overlap them.
Answer:
Ammonia > Urea > Ammonium nitrate > Ammonium sulphate
Explanation:
Percentage by mass of nitrogen in NH3:
Molar mass of NH3= 17 g/mol
Hence % by mass = 14/17 × 100 = 82.35%
% by mass of NH4NO3
Molar mass of NH4NO3 = 80.043 g/mol
Hence; 28/80.043 × 100 = 34.98%
% by mass of (NH4)2SO4;
Molar mass of (NH4)2SO4= 132.14 g/mol
Hence; 28/132.14 × 100 = 21.19%
% by mass of CH4N2O
Molar mass of urea = 60.0553 g/mol
Hence 28/60.0553 × 100 = 46.62%
What is a hypothesis? O a part of the scientific method that is not necessary a specific and testable question O the variables I observe during the experiment HELP HELP PLS PLS PLS HELP NoW NowWWwWw I'll mark u BRAINLIEST!!!!!!!!
What conclusion is best supported by the decay chain?
A) Each alpha decay results in an isotope that is slightly more stable than the original isotope.
B) Each beta decay results in an isotope that is slightly more stable than the original isotope.
C) The atomic number increase caused by two beta decays is the same as the decrease caused by one alpha decay.
D) The mass number increase caused by two beta decays is the same as the decrease caused by one alpha decay.
Answer:
C. The atomic number increase caused by two beta decays is the same as the decrease caused by one alpha decay.
Answer:
c. The atomic number increase caused by two beta decays is the same as the decrease caused by one alpha decay.
Explanation:
got it correct on quiz
What is the electron geometry of PF3?
Answer:
PF3 has a trigonal pyramidal molecular geometry.
Explanation:
PF3 has four regions of electron density / electron clouds around the central P atom. The regions of electrons make a tetrahedral arrangement with a bond angle of 109.5°. Only three regions of electrons are bonding and one is non-bonding, so the overall shape is trigonal pyramidal.
The electron geometry of [tex]PF_{3}[/tex] is trigonal pyramidal.
What are the characteristics of trigonal pyramidal geometry?In chemistry, a trigonal pyramid is a molecular shape that resembles a tetrahedron and has one atom at the top and three at the corners of the base (not to be confused with the tetrahedral geometry). The molecule belongs to the point group [tex]C_{3v}[/tex] when all three of the atoms in the corners are the same. The pnictogen hydrides ([tex]XH_{3}[/tex]), xenon trioxide ([tex]XeO_{3}[/tex]), the chlorate ion, [tex]ClO^{-} _{3}[/tex], and the sulfite ion, [tex]SO^{-2} _{3}[/tex] are some molecules and ions with trigonal pyramidal structure. Trigonal pyramidal-shaped molecules are sometimes referred to as sp3 hybridized in organic chemistry.Trigonal pyramidal is a molecular shape formed when three bonds and one lone pair exist on the central atom of the molecule. Sp3 hybridization occurs at the central atom of molecules with tetrahedral electron pair geometries. Ammonia (NH3) is a pyramidal trigonal molecule.To learn more about trigonal pyramidal geometry, refer to
https://brainly.com/question/22697472
#SPJ2
Which statement BEST describes a proton? *
A larger mass than an electron and a negative charge
A smaller mass than an electron and a negative charge
A larger mass than an electron and a positive charge
A smaller mass than an electron and a positive charge
Answer:
A larger mass than an electron and a positive charge. Protons mass is 1 amu and electrons is 0 amu.
Explanation:
please give brainlyest
What happens to the electrons when an electric field is applied?
When electric voltage is applied, an electric field within the metal triggers the movement of the electrons, making them shift from one end to another end of the conductor
Explanation:
When electric voltage is applied, an electric field within the metal triggers the movement of the electrons, making them shift from one end to another end of the conductor
4- Calculate the mol fraction of ethanol and water in
a sample of rectified spirit which contains 95% of
ethanol by mass.
Answer:
math si hard
Explanation:
The mole fration of ethanol and water in a sample of rectified spirit which contains 95% of ethanol by mass is 0.8 and 0.11.
How do we calculate mole fraction?Mole fraction of any substance will be calculated by dividing the moles of that substance from the total moles of the solution.
Moles (n) will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given that 95% of ethanol by mass is present in the sample, so 95g of ethanol is present in 100g of solution.
Mass of solvent (water) = 100 - 95 = 5g
Moles of water = 5g / 18g/mol = 0.27mol
Moles of ethanol = 95g / 46g/mol = 2.06mol
Mole fraction of water = 0.27 / (0.27+2.06) = 0.11
Mole fraction of ethanol = 2.06 / (0.27+2.06) = 0.8
Hence required mole fraction of water & ethanol is 00.11 and 0.8 respectively.
To know more about mole fraction, visit the below link:
https://brainly.com/question/1601411
#SPJ2
How many elements are in a isotope?
Answer:i believe 9-?
Explanation:
boron-10
boron-11
carbon-12
carbon-13
oxygen-16
oxygen-17
oxygen-18
chlorine-35
chlorine-37
Define molecular mass. Calculate the molecular mass of calcium carbonate
and nitric acid.
Answer:
HNO₃ =63.0147 g/mol
CaCO₃ = 100.088 g/mol
Explanation:
Molecular mass:
It is the sum of all the atomic masses of the atoms of elements present in a molecule.
For example:
The formula of CaCO₃:
Calcium carbonate consist of one atom of calcium, one atom of carbon and three atoms of oxygen. Thus, its molecular mass would be,
CaCO₃ = 40.078 × 1 + 12.01×1 + 16.00×3
CaCO₃ = 40.078 + 12.01+ 48
CaCO₃ = 100.088 g/mol
The formula of HNO₃:
Nitric acid consist of one atom of hydrogen, one atom of nitrogen and three atoms of oxygen. Thus, its molecular mass would be,
HNO₃ =1.008 × 1 + 14.0067 ×1 + 16.00×3
HNO₃ = 1.008 +14.0067 + 48
HNO₃ =63.0147 g/mol
What will an object moving at a constant velocity do?
come to a stop, unless it is pushed by another force
A.increase in speed
B.maintain a constant velocity until acted on by another force
C.come to a stop on its own
Answer:B
Explanation: an object in motion will stay in motion until acted on by another force and an object in rest will stay in test until acted on by another force
Danielle is asked to determine the density and the identity of a metal. She determines the mass of the metal to be 102.06g and then determines the volume of the sample using water displacement. Find the density. Round the answer to the nearest whole number?
Answer:
11 g/mL
Explanation:
From the question given above, the following data were obtained:
Mass of metal = 102.06 g
Volume of water = 38 mL
Volume of water + metal = 47 mL
Density of metal =.?
Next, we shall determine the volume of the metal. This can be obtained as shown below:
Volume of water = 38 mL
Volume of water + metal = 47 mL
Volume of metal =..?
Volume of metal = (Volume of water + metal) – (Volume of water)
Volume of metal = 47 – 38
Volume of metal = 9 mL
Finally, we shall determine the density of the metal as follow:
Mass of metal = 102.06 g
Volume of metal = 9 mL
Density of metal =.?
Density = mass /volume
Density of metal = 102.06 / 9
Density of metal = 11.34 ≈ 11 g/mL
Therefore, the density of the metal is 11 g/mL
Which two particles are found in an atom's nucleus?
O A. Neutrons
O B. Electrons
O C. Protons
O D. Isotopes
Answer:
protons and neutrons so A and C
What ionic substance is being used to illustrate the concept of lattice energy in Model 1?
Answer:
magnesium oxide
Explanation:
hope this helps
4. Do you think the distribution of elements 10 billion years from now
will be different than it is today? Why or why not?
Answer:
yes
Explanation:
everything will change
How is volume calculated given mass and density? (4 points)
A. Sum of mass and density
B. Mass divided by density
C. Mass multiplied by density
D. Difference of mass and density
The following initial rate data are for the reaction of nitrogen dioxide with carbon monoxide:
NO2 + CO --> NO + CO2
Experiment [NO2]o, M [CO]o, M Initial Rate, Ms-1
1 0.374 0.300 8.39×10-2
2 0.374 0.600 8.39×10-2
3 0.749 0.300 0.337
4 0.749 0.600 0.337
Complete the rate law for this reaction in the box below.
Use the form k[A]m[B]n , where '1' is understood for m or n and concentrations taken to the zero power do not appear. Don't enter 1 for m or n
Rate= ________________
From these data, the rate constant is _________ M-1s-1.
Answer:
7.47 × 10^-1 M-1 s-1
Explanation:
Using the form k[A]^m[B]^n we arrive at the fact that the rate constant of the reaction can be written in the form;
Rate = k[NO2] [CO] where both m and n =1
We can use data from any of the experiments to establish the rate constant hence;
From experiment 1
[NO2] = 0.374M
[CO] = 0.300 M
R= 8.39 × 10^-2
Hence k =8.39 × 10^-2 / [0.374] [0.300]
k= 7.47 × 10^-1 M-1 s-1
Which characteristics of stars is affected by a star's temperature?
Answer:
Characteristics of stars is affected by a star's temperature is Color.
Explanation:
As the color of stars is completely dependent upon its own surface temperature. If the stars are cooler, then it turns red in color. If the stars are hotter, then it turns blue in color.
The density of two liquids, A and B, are 1000. kg/m3 and 600. kg/m3, respectively. The two liquids are mixed in a certain proportion and the density of the resulting liquid is 850 kg/m3. How much of liquid B (in grams) does 1.0 kg of the mixture contain? Assume the volume of the two liquids is additive when mixed.
Answer:
Mass of liquid B = 271.2 gram
Explanation:
Given:
Density of liquid A = 1000 kg/m³
Density of liquid B = 600 kg/m³
Density of mixture = 850 kg/m³
Mass of mixture = 1 kg
Assume:
Volume of liquid A = Va
Volume of liquid B = Vb
So,
Volume of mixture = Va + Vb
Mass of liquid A = 1000(Va)
Mass of liquid B = 600(Vb)
Mass of mixture = Mass of liquid A + Mass of liquid B
1 = 1000(Va) + 600(Vb)
Volume of mixture = 1 / 850
So,
(1/850) = Va + Vb
Vb = (1/850) - Va
1 = 1000(Va) + 600[(1/850) - Va]
Va = 7.25 × 10⁻⁴
Vb = (1/850) - Va
Vb = (1/850) - [7.25 × 10⁻⁴]
Vb = 4.25 × 10⁻⁴
Mass of liquid B = 600(Vb)
Mass of liquid B = 600(4.25 × 10⁻⁴)
Mass of liquid B = 271.2 gram
The mass of liquid B in the 1 Kg mixture is 300 g
Let the volume of liquid A be Va
Let the volume of liquid B be Vb
From the question given above, the following data were obtained:
Density of liquid A = 1000 kg/m³
Density of liquid B = 600 kg/m³
Density of mixture = 850 kg/m³
Mass of mixture = 1 kg
Mass of Liquid B (in grams) =? Next, we shall determine the mass of liquid A and BFor Liquid A:
Density of liquid A = 1000 kg/m³
Volume of liquid A = Va
Mass of Liquid A =?
Mass = Density × Volume
Mass of Liquid A = 1000 × Va
Mass of liquid A = 1000(Va)For Liquid B:
Density of liquid B = 600 kg/m³
Volume of liquid B= Va
Mass of Liquid B =?Mass = Density × Volume
Mass of Liquid B = 600 × Va
Mass of liquid B = 600(Vb)Next, we shall determine the volume of the mixture.Density of mixture = 850 kg/m³
Mass of mixture = 1 kg
Volume of mixture =?Volume = mass /density
Volume of mixture = 1 / 850
Volume of mixture = 0.0012 m³Next, we shall determine the volume of liquid AMass of mixture = 1 Kg
Mass of mixture = Mass of liquid A + Mass of liquid B
1 = 1000(Va) + 600(Vb) ....... (1)Volume of mixture = Va + Vb
Volume of mixture = 0.0012 m³
Thus,
0.0012 = Va + Vb
Vb = 0.0012 – Va ........ (2)Substitute Vb in equation 2 into equation (1)
1 = 1000(Va) + 600[0.0012 – Va]
1 = 1000Va + 0.72 – 600Va
Collect like terms
1 – 0.72 = 1000Va – 600Va
0.28 = 400Va
Divide both side by 400
Va = 0.28 / 400
Va = 0.0007 m³Next, we shall determine the volume of the liquid BVolume of mixture = 0.0012 m³
Volume of liquid A (Va) = 0.0007 m³
Volume of liquid B (Vb) =?Vb = 0.0012 – Va
Vb = 0.0012 – 0.0007
Vb = 0.0005 m³Finally, we shall determine the mass of liquid BVolume of liquid B (Vb) = 0.0005 m³
Mass of liquid B = 600(Vb)
Mass of liquid B = 600(0.0005)
Mass of liquid B = 0.3 Kg
Multiply by 1000 to express in grams
Mass of liquid B = 0.3 × 1000
Mass of liquid B = 300 gLearn more: https://brainly.com/question/17769713
which is not possible sign of chemical change
A:color change
B:light given off
C:heat given off
D:a change of state
Answer:
A. color change
Explanation:
changing the color of a metal does not change its physical properties.
hope it helps.
N2(g) + 2H(g) -> N2 H4(g) What are the volumes of N2 gas and H2 gas required to form 28.5 grams of N2 H4 at 30'C and 1.50 atm?
Answer:
Volume of N₂ = 14.76 L
Volume of H₂ = 29.52 L
Explanation:
Given data:
Mass of N₂H₄ formed = 28.5 g
Pressure = 1.50 atm
Temperature = 30°C (30+273 = 303 k)
Volume of N₂ and H₂ needed = ?
Solution:
Chemical equation:
N₂ + 2H₂ → N₂H₄
Number of moles of N₂H₄ formed = mass/ molar mass
Number of moles of N₂H₄ formed = 28.5 g/ 32 g/mol
Number of moles of N₂H₄ formed = 0.89 mol
Now we will compare the moles of N₂H₄ with N₂ and H₂ form balance chemical equation.
N₂H₄ : N₂
1 : 1
0.89 : 0.89
N₂H₄ : H₂
1 : 2
0.89 : 2×0.89 = 1.78 mol
Volume of H₂:
PV = nRT
1.50 atm × V = 1.78 mol × 0.0821 atm.L/mol.K × 303 K
V = 44.28atm.L /1.50 atm
V = 29.52 L
Volume of N₂:
PV = nRT
1.50 atm × V = 0.89 mol × 0.0821 atm.L/mol.K × 303 K
V = 22.14 atm.L /1.50 atm
V = 14.76 L
are there more metals or nonmetals on the periodic table?
Answer:yes
Explanation:
I think so
There are more metals than nonmetals on the periodic table. The majority of elements on the periodic table are metals, which are found on the left and middle sections of the periodic table.
Metals typically have properties such as high electrical and thermal conductivity, luster, malleability, and ductility.
Nonmetals, on the other hand, are found on the right-hand side of the periodic table, along with the noble gases. Nonmetals generally have properties opposite to those of metals, such as poor electrical and thermal conductivity and a lack of metallic luster. There are fewer nonmetals compared to metals on the periodic table.
Learn more about periodic table, here:
https://brainly.com/question/28747247
#SPJ6
One of the physical properties of bases is that they ____.
Question 17 options:
taste sour
feel slippery
crumble
corrode metal
Answer:
feel slippery
Explanation:they physical properties are due to its slippery nature when touched
How many steps are there in the formation of a Solar System?
O Eight
O Four
O Ten
O Six
If ur a space nerd pls help
Answer:
6 steps
Explanation:
Answer:
6
Explanation:
I looked it up on Google. Hope this is right
Question 4
Volume is what type of physical property?
Question 14
4 pts
Using the formula Na + Cl2 --> Naci, if 2.98 moles of sodium are combined with
excess" chlorine, how many moles of sodium chloride will be made? Note that in
this question, excess means extra or as much as you need.
Answer:
2.98 moles of NaCl are produced.
Explanation:
Given data:
Moles of sodium = 2.98 mol
Amount of chlorine = excess
Moles of NaCl produced = ?
Solution:
Chemical equation:
2Na + Cl₂ → 2NaCl
Now we will compare the moles of sodium chloride with only sodium because sodium is limiting reactant and chlorine is in excess thus sodium limit the yield of product.
Na : NaCl
2 : 2
2.98 : 2.98
2.98 moles of NaCl are produced.
Mintu wants to increase the heat transfer between a metal iron and another piece of metal he wants to shape. He decides to increase the time the two metals are in contact, use a larger metal iron, and use a new metal material with a higher specific heat.
Where is Mintu's error?
Answer:
Mintu should chosen a material with a lower specific heat
Explanation:
I got the answer right on the test trust me it is correct
Sort each of the following elements by effective nuclear charge, Zeff, from smallest to largest:
Sn, Rb, Sb, In, and Sr
Answer:
Rb = +1 , Sr = +2, In= +3, Sn = +4, Sb= +5
Explanation:
Formula:
Zeff = Z - S
Z = atomic number
S = number of core shell or inner shell electrons
For Sn:
Electronic configuration:
Sn₅₀ = [Kr] 4d¹⁰ 5s² 5p²
Zeff = Z - S
Zeff = 50 - 46
Zeff = +4
For Rb:
Electronic configuration:
Rb₃₇ = [Kr] 5s¹
Zeff = Z - S
Zeff = 37 - 36
Zeff = +1
For Sb:
Electronic configuration:
Sb₅₁ = [Kr] 4d¹⁰ 5s² 5p³
Zeff = Z - S
Zeff = 51 - 46
Zeff = +5
For In:
Electronic configuration:
In₄₉ = [Kr] 4d¹⁰ 5s² 5p¹
Zeff = Z - S
Zeff = 49 - 46
Zeff = +3
For Sr:
Electronic configuration:
Sr₃₈= [Kr] 5s²
Zeff = Z - S
Zeff = 38 - 36
Zeff = +2
Ag3PO4 what is the compound with this formula
Answer:
silver (III) phosphate
Explanation: