olive oil is a liquid , so it contains mostly unsaturated fatty acids. these fatty acids have choose... intermolecular forces and choose... melting points.

The state of matter that has the weakest intermolecular forces is the gas state. Option A is correct.

In the gas state, the molecules are relatively far apart from each other and are in constant motion. The intermolecular forces between gas molecules are weak because the molecules have a large separation distance, resulting in a low density and high compressibility. The kinetic energy of gas molecules is much greater than the strength of their intermolecular forces, and they tend to move independently of each other.

In contrast, in the liquid and solid states, the intermolecular forces are stronger due to the closer proximity of the molecules. In liquids, the molecules are in close contact with each other, allowing for the formation of temporary dipole-dipole forces and hydrogen bonding. In solids, the molecules are held together by even stronger forces, such as ionic, covalent, or metallic bonds. Option A is correct.

Which state of matter has the weakest intermolecular forces?

Select the correct answer below:

A. Gas

B. Liquid

C. Solid

D. All states of matter have the same strength of intermolecular forces.

To know more about the Forces, here

https://brainly.com/question/30644583

#SPJ4

The concentration of the pyridinium cation at equilibrium is 3.96 x 10^-9 M.Assuming that pyridinium bromide is a weak acid, we can use the acid dissociation constant (Ka) to calculate the concentration of the pyridinium cation at equilibrium. The Ka for pyridinium bromide is 5.6 x 10^-6.

Using the expression for Ka, we have:

Ka = [H+][C5H5NH+] / [C5H5NHBr]

At equilibrium, [H+] = 10^-pH = 10^-3.10 = 7.94 x 10^-4 M

Substituting the values into the equation and solving for [C5H5NH+], we get:

[C5H5NH+] = Ka * [C5H5NHBr] / [H+] = 5.6 x 10^-6 * [C5H5NHBr] / 7.94 x 10^-4 = 3.96 x 10^-9 M

Find out more about pyridinium bromat ide

brainly.com/question/14727217

#SPJ4

When a strong acid and a strong base are mixed in equal amounts, they undergo a neutralization reaction, resulting in the formation of water and a salt.

Therefore, the mixture of 1 M NaOH and 1 M HCl will not result in a neutral solution but instead will form sodium chloride and water. On the other hand, the mixture of 1 M NH3 and 1 M HCl, and the mixture of 1 M KOH and 1 M HBr, will also undergo neutralization reactions but will result in the formation of ammonium chloride and potassium bromide, respectively. The mixture of 1 M NaOH and 1 M HI will also not result in a neutral solution but will form sodium iodide and water due to the reaction between the strong base NaOH and the weak acid HI.

Learn more about equal amounts,

https://brainly.com/question/13024617

#SPJ4

The given statement "PEL will be the permissible exposure limit of the vapor which is expressed in the parts of vapor per million parts of the contaminated air" will be true. Because, PEL is expressed as parts of the hazardous substance per million parts of air (ppm).

The Permissible Exposure Limit (PEL) is a term used in occupational health and safety to describe the maximum allowable concentration of a hazardous substance in the air that a worker may be exposed to over a specified time period, typically an eight-hour workday.

For example, if the PEL of a substance is 10 ppm, it means that a worker may be exposed to a maximum concentration of 10 parts of the substance per million parts of air during an eight-hour workday without experiencing adverse health effects.

To know more about Permissible Exposure Limit here

https://brainly.com/question/3807093

#SPJ4

The artifact is approximately 17,190 years old. The half-life of carbon-14 is approximately 5730 years. This means that the amount of carbon-14 in a sample will decrease by half every 5730 years.

If the amount of radioactive carbon-14 in a wooden artifact is one-eighth of a new piece of the same wood, then the fraction of carbon-14 remaining after some number of half-lives (n) can be calculated as:

(1/2)^n = 1/8

Simplifying this equation:

2^n = 8

2^n = 2^3

n = 3

This means that the wooden artifact has gone through 3 half-lives of carbon-14. The age of the artifact can be calculated by multiplying the half-life by the number of half-lives:

Age = Half-life × Number of half-lives

Age = 5730 years × 3

Age = 17,190 years

Find out more about the radioactive carbon 14

brainly.com/question/14812944

#SPJ4

If Abby doubles the initial monomer concentration and quadruples the initiator concentration from the original settings, the outcome of the new polymer will likely have a higher number average molecular weight.

Abby's outcome of the new polymer will likely have a higher number average molecular weight because increasing the monomer concentration will lead to more monomer units being available for polymerization, while increasing the initiator concentration will lead to more initiation events, resulting in a higher degree of polymerization.

However, the exact molecular weight of the new polymer will depend on the efficiency of the polymerization reaction and any potential side reactions or termination events that may occur. It is possible that increasing the initiator concentration could also lead to more side reactions, such as chain transfer or termination, which could affect the final molecular weight distribution.

Learn more about monomer concentration: https://brainly.com/question/28875367

#SPJ11

Answer:

To find the empirical formula of a compound, we need to determine the simplest whole number ratio of the atoms present in the compound. We can do this by dividing each element's mass by its molar mass to get the number of moles of each element, and then dividing each number of moles by the smallest number of moles obtained. The molar masses of carbon, hydrogen, and oxygen are 12.01 g/mol, 1.008 g/mol, and 16.00 g/mol, respectively. Number of moles of C = 324 g / 12.01 g/mol = 26.98 mol Number of moles of H = 48.5 g / 1.008 g/mol = 48.11 mol Number of moles of O = 16.0 g / 16.00 g/mol = 1.

Answer:

C27H48O

Explanation:

To determine the empirical formula of the compound, we need to find the simplest whole number ratio of atoms in the compound. We can do this by assuming that we have 100 g of the compound, and finding the number of moles of each element in this amount.

Number of moles of carbon (C): 324 g / 12.01 g/mol = 26.98 mol

Number of moles of hydrogen (H): 48.5 g / 1.01 g/mol = 48.02 mol

Number of moles of oxygen (O): 16.0 g / 16.00 g/mol = 1.00 mol

Next, we divide each of these mole values by the smallest value to get the simplest ratio:

C: 26.98 mol / 1.00 mol = 26.98

H: 48.02 mol / 1.00 mol = 48.02

O: 1.00 mol / 1.00 mol = 1.00

We can see that the simplest ratio of atoms in the compound is approximately C27H48O. However, we need to express this as a whole number ratio, so we divide each subscript by the smallest subscript (which is 1):

Empirical formula: C27H48O

Therefore, the empirical formula of the compound is C27H48O.

The percentage of plants showing phototropism is the dependent variable, and the color of the light is the independent variable. Therefore, the correct answer is: "the percentage of plants showing phototropism is the dependent variable, and the color of the light is the independent variable."

The dependent variable is the variable that is being measured or observed, and its value depends on the independent variable, which is the variable that is being manipulated or changed in the experiment. In this experiment, the percentage of plants showing phototropism is being measured, which means that it is the dependent variable. The color of the light is being manipulated, which means that it is the independent variable.

For more such question on phototropism

https://brainly.com/question/24567669

#SPJ11

it would take 3.16 litres of water to make a 0.19 M solution of NaI from 0.60 moles of NaI.

To calculate the volume of water needed to make a 0.19 M solution of NaI, we need to use the formula:

Moles of solute = Molarity x Volume (in liters)

We can rearrange this formula to solve for the volume of water:

Volume (in liters) = Moles of solute / Molarity

First, let's calculate the number of moles of NaI in 0.60 moles:

Moles of NaI = 0.60 moles

Now, we can use the formula above to calculate the volume of water needed:

Volume (in litres) = Moles of NaI / Molarity

Volume (in litres) = 0.60 moles / 0.19 M

Volume (in litres) = 3.16 litres

Therefore, it would take 3.16 litres of water to make a 0.19 M solution of NaI from 0.60 moles of NaI.
To know more about moles go through:-

https://brainly.com/question/29367909

#SPJ4

The name given to an aqueous solution of HBr is "hydrobromic acid." Option E is correct.

Hydrobromic acid (HBr) is a strong acid that forms when hydrogen bromide gas dissolves in water. It is a clear, colorless liquid having a pungent odor as well as it is highly corrosive. Hydrobromic acid is commonly used in the laboratory and in various industrial applications, including the production of pharmaceuticals, dyes, and other chemicals. It is also used as a reagent in organic chemistry for various types of reactions.

An aqueous solution is the solution in which water will be the solvent. In other words, it is a solution where water is the substance that dissolves other substances, which are called solutes. Many substances can dissolve in water to form aqueous solutions, including salts, acids, and bases.

Hence, E. is the correct option.

To know more about Hydrobromic acid here

https://brainly.com/question/15231576

#SPJ4

--The given question is incomplete, the complete question is

"The name given to an aqueous solution of HBr is . group of answer choices A) bromic acid B) hypobromous acid C) hydrogen bromide D) bromous acid E) hydrobromic acid."--

Plug in the values and calculate the molar concentration of the blue dye in the mixture.

To find the molar concentration of the blue dye in the mixture, we need to use the formula:
[blue]mixture = (moles of blue dye) / (total volume of the mixture)
First, let's find the moles of blue dye
moles of blue dye = volume of blue dye × concentration of blue dye
moles of blue dye = 15.27 mL × 0.3523 M
Next, let's find the total volume of the mixture:
total volume = volume of blue + volume of red + volume of yellow
total volume = 15.27 mL + 35.00 mL + 14.73 mL
Now, we can find the molar concentration of the blue dye in the mixture:
[blue]mixture = (moles of blue dye) / (total volume of the mixture)

For more such questions on molar concentration

brainly.com/question/26255204

#SPJ11

Intrinsic binding energy during enzymatic catalysis is caused by a variety of interactions.

Here are the interactions that can contribute to the intrinsic binding energy during enzymatic catalysis:

Electrostatic interactions are caused by the attraction of opposite charges or the repulsion of like charges. Enzymatic catalysis can be influenced by these interactions.

Permanent covalent bonding is a type of bonding that involves the sharing of electrons between two atoms. The formation of a covalent bond can help in the catalytic process.

Van der Waals interactions are a type of intermolecular force that arises due to fluctuations in the electron density around an atom. These interactions can also contribute to the intrinsic binding energy during enzymatic catalysis.

Nucleophilic attack by serine is a reaction that is commonly used in enzymatic catalysis. The serine acts as a nucleophile and attacks the substrate molecule, which results in the formation of a covalent bond between the enzyme and the substrate molecule.

Hydrogen bonding is another type of interaction that can contribute to the intrinsic binding energy during enzymatic catalysis. Hydrogen bonds are formed between the enzyme and the substrate molecule, which can help to stabilize the transition state during the catalytic reaction.These are the interactions that can contribute to the intrinsic binding energy during enzymatic catalysis.

for more such question on Intrinsic binding

https://brainly.com/question/14773820

#SPJ11

To solve this problem, we can use the balanced equation and the concept of moles and molarity.

First, we need to find the moles of SbCl3. We can use the formula: moles = molarity * volume (in liters) moles of SbCl3 = 0.825 M * 0.2 L = 0.165 moles Next, let's write down the balanced equation: SbCl3 + 3HCl → SbCl5 + 3H2

According to the balanced equation, 1 mole of SbCl3 reacts with 3 moles of HCl. So, moles of HCl required = 0.165 moles of SbCl3 * 3 = 0.495 moles Now, we need to find the volume of 4.00 M HCl required.

Using the formula for moles: moles = molarity * volume (in liters) We can rearrange the formula to solve for the volume: volume (in liters) = moles / molarity volume of HCl (in liters) = 0.495 moles / 4.00 M = 0.12375 L Now, convert the volume to milliliters: volume of HCl (in mL) = 0.12375 L * 1000 mL/L = 123.75 mL So, 123.75 mL of 4.00 M HCl were added.

Therefore the answer is  123.75 mL of 4.00 M HCl were added.

For more questions on: moles

https://brainly.com/question/28037816

#SPJ11  

The acid dissociation constant of hexanoic acid is 4.93 × 10^-10 mol/L.

When measuring the pH of a solution of hexanoic acid to be 4.96, the acid dissociation constant of hexanoic acid can be calculated. This can be done through the following equation:

Ka = [H3O+][A-] / [HA]whereKa

= acid dissociation constantH3O+

= hydronium ionA-

= conjugate baseHA

= acidThe pH of the solution of hexanoic acid is measured to be 4.96.

Thus, [H3O+] is equal to 10^-4.96 or 7.02 × 10^-5 M.

The initial concentration of the hexanoic acid is equal to the concentration of the undissociated acid or [HA].The acid dissociation constant of hexanoic acid can be calculated by plugging the known values into the equation:

Ka = [7.02 × 10^-5][A-] / [HA]The concentration of the conjugate base, A-, is equal to the concentration of the dissociated acid, which is equal to [H3O+].

Thus,Ka = [7.02 × 10^-5]^2 / [HA]Ka = 4.93 × 10^-10 mol/L

To learn more about : acid

https://brainly.com/question/25148363

#SPJ11

[tex] \:\:\:\:\:\:\star [/tex]For the general solubility equilibrium [tex]\sf \underline{AB \longrightarrow A^+ + B^-} [/tex]the solubility product has the following expression-

[tex] \:\:\:\:\:\:\star\longrightarrow \sf\underline{K_{(sp)} = [A^+] \times [B^-]}\\[/tex]

As per question, we are given that-

[tex] \:\:\:\:\:\:\star [/tex] Now that we have all the required values, so we can substitute these values into the Ksp expression and solve for Ksp-

[tex] \:\:\:\:\:\:\star\longrightarrow \sf\underline{K_{(sp)} = [A^+] \times [B^-]}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf K_{(sp)} = 0.00343 \:M\times 0.00343\:M\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf K_{(sp)} = 0.00343 \:molL^{-1}\times 0.00343\:molL^{-1}\\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf \underline{K_{(sp)} = 1.17649\times 10^{-5} \: mol^2L^{-2}}\\[/tex]

A binary compound in which the bonding is ionic is most likely to be scientifically valid when there  the electronegativity difference between the elements in the compound is relatively large.

A binary compound is a type of chemical compound which consists of two distinct elements. An ionic binary compound is formed when there is  a relatively difference in electronegativities of the two elements, so that they have the tendency to form respective cations and anions. More specifically binary compounds refer to expanded solids. examples of ionic binary compounds: KBr, NaCl, NaBr.

There are three types of Binary Compounds. They are: Binary acid compounds, Binary ionic compounds, Binary covalent/molecular compounds.

Thus, for a binary compound to form ionic bond, there must be an electronegativity difference between the elements.

To know more about binary compounds here

https://brainly.com/question/15162286

#SPJ4

When a stock solution is diluted, the number of moles of solute (NaNO3 in this case) remains constant. Therefore, we can use the following equation to find the final molarity of the diluted solution:

M1V1 = M2V2

where M1 is the initial molarity (0.275 M), V1 is the initial volume (15.00 mL), M2 is the final molarity (what we want to find), and V2 is the final volume (100.0 mL).

First, we need to convert the initial volume from milliliters to liters:

V1 = 15.00 mL = 0.01500 L

Next, we can substitute the given values into the equation:

(0.275 M) × (0.01500 L) = M2 × (0.1000 L)

Solving for M2, we get:

M2 = (0.275 M × 0.01500 L) ÷ 0.1000 L

M2 = 0.04125 M

Therefore, the final molarity of the NaNO3 solution is 0.04125 M.

Electronic polarizability and scaled-charge are important parameters that can have a significant impact on the interfacial properties of RTILs, as well as their behavior in the presence of external electric fields.

Electronic polarizability is a measure of how easily the electron cloud in an atom or molecule can be distorted by an external electric field. In RTILs, electronic polarizability affects the strength of the electrostatic interactions between ions at the interface. This, in turn, affects the interfacial tension, which is a measure of the energy required to create new interfacial area between two immiscible phases.

Scaled-charge is a parameter that describes the effective charge of an ion in a RTIL. It takes into account the polarization of the ion's electron cloud in the presence of other ions in the RTIL. Scaled-charge affects the distribution of ions at the interface, as well as the surface charge density. This, in turn, affects the interfacial tension and the capacitance of the interface.

To know more about polarizability here

https://brainly.com/question/29765380

#SPJ4

Answer: 1.57g and 70.5%

Explanation:

Theoretical Yield

The theoretical yield of a reaction is the absolute maximum amount of product that could be created with the amounts of reactants.

This problem gives us the amount of hydrochloric acid, which is 6.37 grams. The molar mass of HCl is the molar mass of hydrogen plus the molar mass of chlorine, which is 36.46 g/mol.

To find the moles of HCl, we just divide the mass by the molar mass.

6.37/36.46 = 0.175 moles HCl

Since oxygen is in excess, the amount used in the reaction will be dictated by the amount of HCl used in the reaction. It does not need to be taken into consideration when determining the amount of reactant since it is in excess.

To find the theoretical yield of water, we will do stoichiometry.

Balancing the equation

Written out with the chemical symbols, this equation is

HCl + O2 ⇒H2O + Cl

This is not balanced, since there is 1 hydrogen on the left side and 2 on the right, and 2 oxygens on the left and 1 on the right.

To balance this, we can put coefficients in front of some reactants and products to make sure there are equal amounts of everything on each side.

The balanced equation will be 4HCl + O2 ⇒ 2H2O + Cl

Now, there are 4 hydrogens on the left and 4 on the right, as well as 2 oxygens on the left and 2 on the right. It is balanced.

We can see by looking at the coefficients of the balanced equation that every 4 moles of HCl consumed will produce 2 mole of H2O, so the ratio is 1:2.

To do stoichiometry, we will multiply the moles of HCl by the ratio of H2O to HCl, which is just dividing by 2.

The theoretical yield of water is then 0.175 moles HCl * [tex]\frac{1moleH2O}{2moleHCl}[/tex] = 0.1874 moles H2O.

Our theoretical yield is 0.0874 moles H2O. But the question and the actual yield are in grams, so we will convert this to grams. To convert moles to grams, just multiply the moles by the molar mass. The molar mass of water is 18.0 g/mol, so

0.0874*18.0 = 1.57 g

The theoretical yield is 1.57 g H2O

Percent Yield

Percent yield is much easier. Percent yield is

((actual yield)/(theoretical yield))*100

In this case, our actual yield is 1.11 grams and our theoretical yield is 3.15 grams, so

[tex]\frac{1.11}{1.57} =[/tex] 70.5%

70.5% is the percent yield.

the new freezing point of the solution is 0°C - 6.19°C = -6.19°C.

Assuming complete dissociation of the rock salt in water, the number of particles in the solution is 0.50 moles of rock salt x 2 particles per formula unit (NaCl) = 1.0 mole of particles.

The molal concentration of the solution can be calculated as follows:

molality (m) = moles of solute / mass of solvent in kg

mass of solvent = 300 g = 0.3 kg

m = 1.0 moles / 0.3 kg = 3.33 m

The freezing point depression (ΔTf) of the solution can be calculated using the formula:

ΔTf = Kf x m

where Kf is the freezing point depression constant of water, which is 1.86 °C/m.

ΔTf = 1.86 °C/m x 3.33 m = 6.19 °C

Therefore, the new freezing point of the solution is 0°C - 6.19°C = -6.19°C.

learn more about temperature related question here:

https://brainly.com/question/28648062

#SPJ9

The process of particles of a liquid becoming particles of a gas is called vaporization or boiling, which occurs when the kinetic energy of the particles overcomes the intermolecular forces holding the liquid together.

This differs from evaporation, which only occurs at the surface of a liquid and can occur at any temperature.

Evaporation is a physical process in which a liquid substance is transformed into its gaseous state, by the absorption of energy in the form of heat. In this process, the molecules at the surface of the liquid gain sufficient energy to overcome the intermolecular forces that hold them together, and escape into the surrounding space as a gas.

Evaporation plays an important role in many fields of chemistry, such as in the separation and purification of substances. It is commonly used in the process of distillation, where a mixture of two or more liquids is heated and the components with different boiling points evaporate and are condensed separately. The rate of evaporation is affected by several factors, including temperature, surface area, humidity, and the nature of the liquid.

To learn more about Evaporation visit here:

brainly.com/question/5019199

#SPJ4

The molarity of the diluted solution is 0.125M.

To find the molarity of the diluted solution after adding 25 ml of water to 125 ml of a 0.15 M sodium hydroxide solution, you can follow these steps:

1. Determine the initial volume (V1) and molarity (M1) of the sodium hydroxide solution: V1 = 125 ml and M1 = 0.15 M.
2. Determine the volume of water added (V2): V2 = 25 ml.
3. Calculate the total volume of the diluted solution (Vt):

      Vt = V1 + V2

      Vt = 125 ml + 25 ml

      Vt = 150 ml.
4. Use the dilution equation M1V1 = M2V2, where M2 is the molarity of the diluted solution.
5. Solve for M2:

      M2 = (M1V1) / Vt

      M2 = (0.15 M × 125 ml) / 150 ml

      M2 = 18.75 / 150

      M2 = 0.125 M.

So, the molarity of the diluted solution after adding 25 ml of water to 125 ml of a 0.15 M sodium hydroxide solution will be 0.125 M.

Learn more about molarity here:

brainly.com/question/8732513

#SPJ11

As a result, the theoretical yield of Fe3O4 in moles is 1.426 x 105 molewhile the actual yield is 2.41 mole and the percent yield is 0.107%.

The reaction's chemically balanced equation is as follows:

4H₂ + Fe₃O₄ = 3Fe + 4H₂O

Fe₃O₄has a molar mass of 231.5326 g/mol7.

We need to know the mass of Fe₃O₄ created in order to calculate the real amount of Fe₃O₄ in moles. 559 g1 of Fe₃O₄ were produced.

We must first determine the quantity of Fe utilized in the reaction in order to compute the theoretical yield of magnitude  Fe₃O₄  moles. 7.97 million g, or 7.97 x 106 g, of Fe are used1. Fe has a molar mass of 55.845 g/mol7. Hence, the amount of Fe utilized in the reaction was:

1.426 x 105 mole = (7.97 x 106 g) / (55.845 g/mole)

One mole of Fe creates one mole of Fe3O4 according to the chemical equation. As a result, 1.426 x 105 mole is the theoretical yield of magnitude Fe3O4 in moles.

In order to determine percent yield, we apply the formula:

(Actual yield / Theoretical yield) times 100% equals the percent yield.

Replacement of values

Yield is calculated as follows:

(559 g/(1.426 x 105 mole/231.5326 g/mol)) x 100% = **0.107%**6.

What common chemical formulas are there?

Listed below are some typical chemical formulas:

- H₂O, or water

- NaCl: Salt

Baking soda is NaHCO₃.

- NaClO for bleach

- Table sugar (sucrose): C12H22O11

- CO₂: Carbon dioxide

- NH₃ for ammonia

- H₂O₂, or hydrogen peroxide

To know more about chemical formulas visit:

brainly.com/question/29031056

#SPJ1

To calculate the volume of

[tex]5.9 \times 10^23[/tex]

molecules of propane gas trapped in a container at a pressure of 253.3 kPa and a temperature, we can use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

We need to convert the number of molecules to moles. The molar mass of propane is 44.1 g/mol, so the number of moles of propane is

[tex]5.9 \times 10^23[/tex]

molecules /

[tex]6.022 \times 10^23[/tex]

molecules/mol = 0.98 moles.

We need to convert the pressure to atmospheres (atm), which is the unit typically used with the ideal gas law. 253.3 kPa / 101.3 kPa/atm = 2.50 atm.

We also need to convert the temperature to Kelvin by adding 273.15 to the Celsius temperature. Let's assume the temperature is 25°C, so T = 25°C + 273.15 = 298.15 K.

We can plug in the values into the ideal gas law equation and solve for V:

[tex]V = (nRT) / P = (0.98 mol \times 0.0821 L•atm/mol•K \times 298.15 K) / 2.50 atm = 29.6 L[/tex]

The volume of

[tex]5.9 \times 10^23[/tex]

molecules of propane gas trapped in a container at a pressure of 253.3 kPa and a temperature of 25°C is 29.6 L.

The ideal gas law equation is a useful tool to calculate the volume of a gas sample when its pressure, temperature, and amount of substance are known.

It is important to convert the units to the appropriate ones and use the correct value for the gas constant depending on the units used.

Learn more about propane here:

https://brainly.com/question/25008296

#SPJ4

To find the moles of the gas , we can use the ideal gas law. Which states -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

Where:-

As per question, we are given that-

Now that we have all the required values, so we can put them all in the Ideal gas law formula and solve for moles -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 1.55 \times 58 = n \times 0.0821 \times 222\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 89.9 = n \times 18.2262\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf n \times 18.2262 =89.9\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n = \dfrac{89.9}{18.2262}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n =4.9324......\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{n =4.93 \:moles }\\[/tex]

Therefore, 4.93 moles of gas will be occupied 58 L at a pressure of 1.55 atmospheres and a temperature of 222K.

Answer:

4.93 moles

Explanation:

To find how many moles of gas pressure occupy 58 L at a pressure of 1.55 atmospheres and a temperature of 222 K, use the ideal gas law.

[tex]\boxed{\sf PV=nRT}[/tex]

where:

As we are solving for the number of moles, rearrange the equation to isolate n:

[tex]\implies \sf n=\dfrac{PV}{RT}[/tex]

Given values:

Substitute the values into the formula and solve for n:

[tex]\implies \sf n=\dfrac{1.55 \cdot 58}{0.08206 \cdot 222}[/tex]

[tex]\implies \sf n=\dfrac{89.9}{18.21732}[/tex]

[tex]\implies \sf n=4.93\;mol\; (3\;s.f.)[/tex]

Therefore, 4.93 moles of gas occupy a volume of 58 L at a pressure of 1.55 atm and a temperature of 222 K.

HCl after dilution: Final concentration = 0.107 g/ml,  NH₃ after dilution: Final concentration = 0.016875 g/ml

To calculate the concentration of HCl after dilution:
Step 1: Find the mass of HCl in the 10 ml concentrated solution.
Mass = Volume × Density × Concentration
Mass = 10 ml × 1.07 g/ml × 0.25
Mass = 26.75 g
Step 2: Calculate the final volume after dilution, which is the volume of the volumetric flask.
Final volume = 250 ml
Step 3: Calculate the final concentration of HCl.
Final concentration = Mass / Final volume
Final concentration = 26.75 g / 250 ml
Final concentration = 0.107 g/ml (or 10.7% by mass)
To calculate the concentration of NH₃ after dilution:
Step 1: Find the mass of NH3 in the 15 ml concentrated solution.
Mass = Volume × Density × Concentration
Mass = 15 ml × 0.75 g/ml × 0.15
Mass = 1.6875 g
Step 2: Calculate the final volume after dilution, which is the volume of the volumetric flask.
Final volume = 100 ml
Step 3: Calculate the final concentration of NH₃.
Final concentration = Mass / Final volume
Final concentration = 1.6875 g / 100 ml
Final concentration = 0.016875 g/ml (or 1.6875% by mass)

For more such questions on HCl

brainly.com/question/24613812

#SPJ11

The pH of a solution which is 0.1426 M in NH3 and 0.1291 M in NH4Br (common ion effect) is 9.42.

The pH of a solution with a given molarity can be determined by using the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to its components' pKa and concentrations. The pH of a 0.1426 M solution of NH3 (weak base) and 0.1291 M NH4Br (salt of a weak base and a strong acid) can be calculated using this equation:

NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)NH4Br → NH4+ + Br-pH = pKa + log [base]/[acid]where pKa is the negative logarithm of the acid dissociation constant of NH4OH (or ammonium hydroxide), which is equal to 9.25. Because the equation refers to NH3, we need to find Kb (base dissociation constant) from the given pKa value.Kb = Kw/Ka= 1.0×10^-14/1.8×10^-5= 5.56×10^-10

At equilibrium, [NH3] = [NH4+] and [OH-] = xSo, Kb = [NH4+][OH-]/[NH3]Therefore, 5.56×10^-10= x^2/(0.1426-x)Because the concentration of NH4+ ions in NH4Br is negligible compared to the concentration of NH3, we can assume that x = [OH-]. Thus, 5.56×10^-10= x^2/0.1426, which yields [OH-] = 1.89×10^-6 M. As a result, pH = 14 - pOH = 14 + log [H+]= 14 + log (1.0×10^-14/1.89×10^-6)≈ 9.42Therefore, the pH of the solution is 9.42.

To know more about pH refer to-

brainly.com/question/15289714#

#SPJ11

The two correct statements are:

A) In the forward reaction, nitrogen and hydrogen combine to form ammonia.

C) In the reverse reaction, nitrogen and hydrogen combine to form ammonia.

The given reaction is the synthesis of ammonia, which is represented as:

N2 + 3H2 → 2NH3

In the forward reaction, nitrogen and hydrogen combine to form ammonia, as stated in option A.

In the reverse reaction, ammonia decomposes back into nitrogen and hydrogen, which is the opposite of the forward reaction. The reverse reaction is represented as:

2NH3 → N2 + 3H2

Option B is incorrect because it describes the reverse reaction instead of the forward reaction. Option D is incorrect because it describes the decomposition of ammonia instead of the synthesis of ammonia.

Find out more about ammonia

brainly.com/question/13927596

#SPJ4

To fix the issue, the student should carefully reapply the sample in a smaller amount, allow it to dry completely, and adjust the solvent system if necessary to achieve proper separation of the components on the TLC plate.

The student might have made the following technical mistake while running the TLC plate:

1. Overloading the sample: When spotting the TLC plate, the student may have applied too much sample, causing the components to streak rather than separate into individual spots. To resolve this, the student should apply a smaller amount of sample and ensure that it is evenly distributed.

2. Insufficient drying: If the student did not allow the spotted sample to dry properly before placing it in the solvent, it can cause the components to streak. To prevent this, the student should ensure the sample is completely dry before running the TLC plate.

3. Inappropriate solvent system: Although the student used a 10% ethyl acetate/hexane mixture, it is possible that this solvent system was not suitable for the specific sample. Adjusting the solvent ratio or trying different solvent systems could help achieve better separation.

to know more about TLC refer here:

https://brainly.com/question/13086570#

#SPJ11