To find the molar mass of the gas, we can use the ideal gas law:
PV = nRT
where P is the pressure in Pa, V is the volume in m^3, n is the number of moles of gas, R is the ideal gas constant (8.31 J/(mol·K)), and T is the temperature in K.
First, we need to convert the given values to the appropriate units:
12.0 g -> 0.0120 kg
2.8 dm^3 -> 0.0028 m^3
27°C -> 300 K (adding 273 to convert from Celsius to Kelvin)
100 kPa -> 100,000 Pa
Now we can rearrange the ideal gas law to solve for n:
n = PV/RT
n = (100,000 Pa) x (0.0028 m^3) / [(8.31 J/(mol·K)) x (300 K)]
n = 0.001214 mol
Finally, we can calculate the molar mass (M) using the formula:
M = m/n
where m is the mass of the gas (in grams). Since we have the mass in kilograms, we need to multiply by 1000 to convert to grams:
M = (0.0120 kg x 1000 g/kg) / 0.001214 mol
M = 9906.2 g/mol
Therefore, the molar mass of the gas is approximately 9906 g/mol.
Sandstone is made up of sand-sized grains of minerals and stones. Most of the minerals in sandstone are ones that are not very valuable, such as quartz. Sandstone is easy to cut in straight lines. It usually lasts a long time, even out in the wind and rain.
Which of these would be a good use of sandstone?
Any application that requires a durable and aesthetically pleasing material that can be easily cut into straight lines would be a good use of sandstone.
Sandstone's durability and ease of cutting make it suitable for various uses, including:
Building construction: Sandstone can be used for building construction purposes, such as in the construction of walls, columns, and decorative elements. Its durability and resistance to weathering make it a preferred building material in many areas.Landscaping: Sandstone can be used in landscaping projects, such as for building garden walls, paths, and stepping stones. Its natural appearance and durability make it an attractive and functional option.Sculpture and art: Sandstone's ability to be easily cut in straight lines and its natural color and texture make it an ideal medium for sculptors and artists. Many famous sculptures and carvings throughout history have been made from sandstone.For more question on sandstone click on
https://brainly.com/question/30494102
#SPJ11
Valentina's diagram shows a model of an air mass. The dots represent molecules of the gasses that make up air. She wants to change this model to represent what happens to the air mass when it comes into contact with a warm front. Describe the changes Valentina will need to make on the model.
Valentina will need to modify the air mass model by spreading out the air molecules, reducing the density of the air mass, adding cloud symbols and water droplets, and adding arrows to show wind direction and speed.
What will happen to the air mass when it comes into contact with a warm front?When an air mass comes into contact with a warm front, several changes occur in the air mass. Valentina will need to modify the model to reflect these changes.
First, as the air mass moves towards the warm front, it will encounter warmer air. This will cause the air molecules in the air mass to speed up and spread out. Valentina can represent this by spreading out the dots that represent the air molecules in the air mass.
Second, as the air molecules spread out, the density of the air mass will decrease. Valentina can represent this by reducing the number of dots in the air mass model.
Third, as the air mass rises over the warm front, it will cool down due to the lower atmospheric pressure. This can cause water vapor in the air mass to condense, forming clouds. Valentina can add cloud symbols to the model to represent this change.
Fourth, the warm front will also bring moisture into the air mass. Valentina can represent this by adding water droplets to the air mass model.
Fifth, as the warm front moves in, it will cause changes in wind direction and speed. Valentina can add arrows to the model to show the direction and speed of the wind.
Learn more about air here:
https://brainly.com/question/19368011
#SPJ1
how would the earth system change of the following atmospheric gases were to change concentration by /- 5%: nitrogen (78%)? oxygen (21%)? water vapor (0-5%)?
Changes in the concentrations of atmospheric gases can have many effects on the Earth system.
We will see the change of Earth system if the concentrations of the nitrogen, oxygen and water vapor were to change by +/- 5%:
Nitrogen ([tex]N_{2}[/tex] , 78% in atmosphere)A +/- 5% change in the concentration of nitrogen would make a minor impact on the Earth system. Nitrogen is an inert gas. It does not react chemically with other substances. Small increase in nitrogen concentration could benefit plant growth. But too much nitrogen can lead to eutrophication in water bodies. It will cause algal blooms and fish kills.
Oxygen ([tex]O_{2}[/tex] , 21% in atmosphere)A +/- 5% change in the concentration of oxygen will create significant effects on the Earth system. A decrease in oxygen concentration could lead to respiratory problems for animals also humans. Decrease in oxygen concentration could also affect combustion processes. We know oxygen is a crucial factor in combustion. An increase in oxygen concentration may lead to an increased risk of fires.
Water vapor ([tex]H_{2} O[/tex] , 0-5% in atmosphere)A +/- 5% change in the concentration of water vapor make significant effects on the Earth system. Water vapor is a greenhouse gas. It will contribute to the Earth's natural greenhouse effect. An increase in water vapor concentration lead to an enhanced greenhouse effect. It will result in more significant global warming. Decrease in water vapor concentration makes a cooling effect on the Earth's climate. Water vapor is also essential for the formation of clouds and precipitation. Changes in its concentration could affect regional weather patterns.
Learn more about Earth system:
https://brainly.com/question/11224776
#SPJ4
in a titration, 12.060 ml of a 1.087 m weak acid solution are placed in a 125 ml erlenmeyer flask. a 1.114 m solution of naoh (aq) is placed in the buret and filled to the 0.00 ml mark. naoh solution is added to the flask and the buret reading is now 20.561. what is the ph of the solution?
NaOH solution is added to the flask and the buret reading is now 20.561. The pH of the solution is 9.39.
To find the pH of the solution, we need to calculate the concentration of the weak acid after it has reacted with the strong base.
First, let's calculate the number of moles of NaOH that were added to the flask:
1.114 M x (20.561 mL - 0.00 mL) = 22.931354 mmol NaOH
Since the weak acid and strong base react in a 1:1 mole ratio, we know that 22.931354 mmol of weak acid were also present in the flask
The volume of the solution in the flask is 12.060 mL, or 0.01206 L. Therefore, the concentration of the weak acid in the flask before the titration was:
1.087 M x (12.060 mL / 1000 mL) = 0.01313202 M
Now we can use the concentration of the weak acid and the amount of moles of weak acid to calculate the concentration of the weak acid after the titration:
0.01313202 M - (22.931354 mmol / 0.125 L) = 0.01126778 M
The pH of the solution can be calculated using the pKa of the weak acid:
pH = pKa + log([A-]/[HA])
We'll need to know the pKa of the weak acid to solve the problem. Let's assume the weak acid is acetic acid (CH3COOH), which has a pKa of 4.76.
Substituting the values we have:
pH = 4.76 + log([CH3COO-]/[CH3COOH])
We need to find the ratio of [CH3COO-] (conjugate base) to [CH3COOH] (weak acid).
Since we started with 0.01313202 M of CH3COOH, and the weak acid and strong base react in a 1:1 mole ratio, we know that 22.931354 mmol of CH3COOH reacted, leaving 0.009828666 mol of CH3COOH in the solution.
Since CH3COOH is a weak acid that undergoes partial dissociation in water, we can assume that [CH3COO-] = [OH-] and [CH3COOH] = [H+].
Therefore, [OH-] = [CH3COO-] = x
[H+] = [CH3COOH] = Ka/[OH-] = 1.8 x 10^-5 /
Substituting these values into the equation above:
pH = 4.76 + log(x / 0.009828666)
To solve for x, we'll need to use the quadratic formula because the dissociation of CH3COOH is not complete, making it a weak acid/base problem.
x^2 + 1.14 x 10^-5 x - 2.23 x 10^-11 = 0
Solving this equation yields
x = 5.79 x 10^-7 M
Therefore, the pH of the solution is:
pH = 4.76 + log(5.79 x 10^-7 / 0.009828666) = 9.39
Therefore, the pH of the solution is 9.39.
Know more about pH here: https://brainly.com/question/31229711
#SPJ4
Determine the pressure of 0.6 moles of a gas sample collected at STP conditions
STP, or standard temperature and pressure, is a set of conditions used for comparing and measuring gases. STP is defined as a temperature of 0°C (273.15 K) and a pressure of 1 atmosphere (atm).
To determine the pressure of 0.6 moles of a gas sample collected at STP conditions, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.
At STP conditions, the temperature T is 0°C or 273.15 K, and the number of moles n is given as 0.6. We also know that the volume V of the gas sample is equal to 22.4 L, which is the molar volume of any gas at STP.
Using these values, we can rearrange the ideal gas law equation to solve for the pressure P:
P = nRT/V
Substituting the known values, we get:
P = (0.6 mol)(0.0821 L·atm/mol·K)(273.15 K) / 22.4 L
P = 1.98 atm
Therefore, the pressure of 0.6 moles of a gas sample collected at STP conditions is 1.98 atm.
To know more about universal gas constant, visit:
https://brainly.com/question/14279790
#SPJ1
calculate the volume of 0.010 m h2so4 (the titrant) required to completely titrate 50 ml of 500 ppm na2co3 solution (analyte) using the stoichiometry of the molecular reaction.
The volume of 0.010 M H2SO4 required to completely titrate 50 mL of 500 ppm Na2CO3 solution using the stoichiometry of the molecular reaction is 5 μL.
To calculate the volume of 0.010 M H2SO4 (the titrant) required to completely titrate 50 mL of 500 ppm Na2CO3 solution (analyte) using the stoichiometry of the molecular reaction, the following steps can be used;Determine the balanced molecular reaction equation.
Write down the molar ratio of H2SO4 and Na2CO3.Calculate the number of moles of Na2CO3 in 50 mL of the solution.Calculate the volume of 0.010 M H2SO4 required to react with the moles of Na2CO3 present.The balanced equation of the reaction is:
Na2CO3 + H2SO4 → Na2SO4 + H2O + CO2The molar ratio of Na2CO3 and H2SO4 can be obtained from the balanced equation as follows:1 mole of Na2CO3 reacts with 1 mole of H2SO4.The number of moles of Na2CO3 in 50 mL of 500 ppm Na2CO3 solution can be calculated as follows:ppm means parts per million = 1 part in 106 partsTherefore,
500 ppm = 500/106 = 0.0005Multiply the number of moles of Na2CO3 by the molar ratio of H2SO4 and Na2CO3 to obtain the number of moles of H2SO4 required.
0.0005 × 1 = 0.0005 moles of H2SO4The volume of 0.010 M H2SO4 required to react with 0.0005 moles of Na2CO3 can be calculated as follows:
V = (number of moles × molarity) ÷ (concentration in M)
where V is the volume in liters (L)0.0005 × 0.010 ÷ 1 = 0.000005 L or 5 μL
To learn more about : volume
https://brainly.com/question/27100414
#SPJ11
what is the purpose of having two tubes containing bromothymol blue solution without the cabomba in the activity? explain your answer.
In an activity involving the use of bromothymol blue solution and Cabomba (an aquatic plant), the purpose of having two tubes containing bromothymol blue solution without the Cabomba is to serve as control tubes.
The control tubes allow us to compare the changes in color and pH of the solution in the experimental tubes (i.e., the tubes with Cabomba) to the changes in the solution without Cabomba.
The bromothymol blue solution changes color in response to changes in pH, so if the solution in the experimental tube turns yellow (indicating a decrease in pH) while the solution in the control tube remains blue, we can conclude that the decrease in pH is due to the activity of the Cabomba. On the other hand, if both the experimental and control tubes turn yellow, we cannot attribute the change in pH solely to the activity of the Cabomba, as there may be other factors affecting the pH of the solution.
By having control tubes, we can ensure that any observed changes in the experimental tubes are due to the activity of the Cabomba and not due to some other factor. This helps to ensure the accuracy and reliability of the experimental results.
To know more about bromothymol here
https://brainly.com/question/30150766
#SPJ4
methane is compressed in a steady-state adiabatic compressor (87% efficient) to 0.4 mpa. what is the required work per mole of methane in kj?
If methane is compressed in a steady-state adiabatic compressor (87% efficient) to 0.4 mpa, then the required work per mole of methane is 4.04 kJ/mol.
To determine the required work per mole of methane, we can use the following formula:
[tex]W = \frac{(P_2V_2 - P_1V_1)}{n} * \eta[/tex]
Where:
W is the work done per mole of methane in kJ
P₁ is the initial pressure of methane
V₁ is the initial volume of methane
P₂ is the final pressure of methane
V₂ is the final volume of methane
n is the number of moles of methane
η is the efficiency of the compressor
Assuming that the compression process is reversible and adiabatic, we can use the following relationships:
[tex]\frac{P_2}{P_1} = (\frac{V_1}{V_2})^{\gamma}[/tex]
[tex]\frac{T_2}{T_1} = (\frac{V_1}{V_2})^{(\gamma-1)}[/tex]
where:
[tex]\gamma = \frac{C_p}{C_v}[/tex] is the ratio of specific heats of methane
[tex]C_p[/tex] is the specific heat at constant pressure
[tex]C_v[/tex] is the specific heat at constant volume
Since the process is adiabatic, there is no heat transfer (Q = 0) and therefore the compression is reversible, so we can use the above relationships.
Let's assume that we have one mole of methane, and use the ideal gas law to find the initial volume:
[tex]P_1V_1 = nRT_1[/tex]
Where:
R is the gas constant for methane
T₁ is the initial temperature
Assuming standard temperature and pressure (STP) conditions (T₁ = 273.15 K, P₁ = 1 atm), we have:
[tex]V_1 = \frac{nRT_1}{P_1} = \frac{(1)*(8.314 )*(273.15)}{(1 * 101.325)} = 22.414[/tex] L/mol
Next, we can use the relationships for adiabatic compression to find the final volume and temperature:
[tex]\frac{P_2}{P_1} = (\frac{V_1}{V_2})^{\gamma}[/tex]
⇒ [tex]\frac{0.4}{101.325} = (\frac{22.414}{V_2})^{1.31}[/tex]
[tex]V_2 = 6.903[/tex] L/mol
[tex]\frac{T_2}{T_1} = (\frac{V_1}{V_2})^{\gamma-1}[/tex]
[tex]T_2 = T_1 * (\frac{V_1}{V_2})^{\gamma -1}[/tex]
[tex]T_2 = 273.15* (\frac{22.414}{6.903})^{(1.31-1)}[/tex]
[tex]T_2 = 550.1 K[/tex]
Now we can substitute the values into the formula for work:
[tex]W = \frac{(P_2V_2 - P_1V_1)}{n} * \eta[/tex]
[tex]W = \frac{[(0.4*6.903) - (1*22.414)]}{1} * 0.87[/tex]
[tex]W = -4.04[/tex] kJ/mol
the negative sign indicates that work is done on the system (i.e. the compressor does work on the methane). Therefore, the required work per mole of methane is -4.04 kJ/mol
learn more about methane
brainly.com/question/29481150
#SPJ4
which of the following is correct concerning the acid ionization constant, ka, of iodous acid, hio2? group of answer choices if more hio2 is dissolved into water, the ph of the solution will remain the same. if more hio2 is dissolved into water, then ka will increase.
Neither of the statements is correct concerning the acid ionization constant, Ka, of iodous acid, HIO₂.
When more HIO₂ is dissolved into water, the pH of the solution will change. This is because HIO₂ is a weak acid and will undergo dissociation in water to produce H⁺ ions and IO₂⁻ ions. The concentration of H⁺ ions will affect the pH of the solution.
Similarly, the value of Ka will also change if more HIO₂ is dissolved into water. Ka is the equilibrium constant for the dissociation of HIO₂ in water. If more HIO₂ is dissolved into water, the equilibrium will shift to the right, resulting in an increase in the concentration of H⁺ ions and IO₂⁻ ions.
This will result in an increase in the value of Ka, as Ka is directly proportional to the concentration of H⁺ ions produced by the dissociation of the weak acid.
Therefore, if more HIO₂ is dissolved into water, both the pH of the solution and the value of Ka will change.
To know more about acid ionization constant here
https://brainly.com/question/4110687
#SPJ4
--The given question is incomplete, the complete question is
"Which of the following is correct concerning the acid ionization constant, ka, of iodous acid, HIO₂? group of answer choices A) if more HIO₂ is dissolved into water, B) the ph of the solution will remain the same. C) if more HIO₂ is dissolved into water, then ka will increase."--
if a flask initially contains 0.250 atm ofcis-2-butene and 0.165atm oftrans-2-butene, what is theequilibrium pressure of each gas
Without additional information about the chemical reaction involved, we cannot determine the equilibrium pressures of cis-2-butene and trans-2-butene. But with the given information it could be 0.0485atm.
It is mandatory to note that the given pressures only represent the initial partial pressures of each gas in the mixture. So, in order to determine the equilibrium pressures, we would need to know the conditions of the reaction, such as the temperature, the presence of a catalyst, and the products formed.
Substitute the given values and solve for the unknowns: 3.40 = P(trans-2-butene) / 0.250 P(trans-2-butene) = 0.850 atm P(cis-2-butene) = (0.165 atm) / 3.40 P(cis-2-butene) = 0.0485 atm
Therefore, the equilibrium pressure of trans-2-butene is 0.850 atm and the equilibrium pressure of cis-2-butene is 0.0485 atm.
If we assume that the cis-2-butene and trans-2-butene are in a mixture at equilibrium, we would need to know the equilibrium constant for the reaction in order to determine the equilibrium concentrations (or partial pressures) of each gas. Then, we could use the ideal gas law to calculate the equilibrium pressures.
Learn more about Equilibrium pressure here:
brainly.com/question/17049019
#SPJ4
a student used 0.1153 g of ascorbic acid to prepare 50.00 ml of aa solution. a titration of 2.5 ml of the solution required 26.50 ml of dcp solution. what is the molarity of the dcp solution
The molarity of the DCP solution is 0.00124 M.
In order to calculate the molarity of the DCP solution, we need to use the following equation.
Molarity of AA solution x Volume of AA solution used = Molarity of DCP solution x Volume of DCP solution used
First, let's calculate the molarity of the AA solution.
Moles of AA = mass of AA/molar mass of AA
Molar mass of AA (ascorbic acid) = 176.12 g/mol
Moles of AA = 0.1153 g / 176.12 g/mol = 0.0006548 mol
Molarity of AA solution = moles of AA / volume of AA solution
Volume of AA solution used = 2.5 ml = 0.0025 L
Molarity of AA solution = 0.0006548 mol / 0.0500 L = 0.0131 M
Now we can use the above equation to calculate the molarity of the DCP solution.
Molarity of DCP solution = (Molarity of AA solution x Volume of AA solution used) / Volume of DCP solution used
Molarity of DCP solution = (0.0131 M x 0.0025 L) / 0.0265 L
= 0.00124 M
To know more about molarity here
https://brainly.com/question/8732513
#SPJ4
chris needs to mix a 10% acid solution with a 30% acid solution to create 100 milliliters of a 16% solution. how many milliliters of each solution must chris use?
Let's assume that Chris uses x milliliters of the 10% acid solution and (100 - x) milliliters of the 30% acid solution. Hence this assumption results in 16% solution of 100 milliliters.
To find the amount of acid in the resulting 16% solution, we can use the following equation:
0.1x + 0.3(100 - x) = 0.16(100)
We have got 0.16(100) and after Simplifying the equation, we will get:
0.1x + 30 - 0.3x = 16
-0.2x = -14
And the final solution would be after doing the above equation is
x = 70
Therefore, Chris needs to use 70 milliliters of the 10% acid solution and (100 - 70) = 30 milliliters of the 30% acid solution to create 100 milliliters of a 16% solution.
Learn more about Acid solutions here:
brainly.com/question/13208021
#SPJ4
2.0 mol P4010 reacts with
8.0 mol H₂O according to
the equation below:
P4010 + 6H₂O → 4H3PO4
How many moles of H3PO4 form from
2.0 mol P4010?
? ] mol H3PO4
Answer:
8.0 moles
Explanation:
According to the balanced chemical equation, 1 mole of P4O10 reacts with 6 moles of H2O to produce 4 moles of H3PO4. So if 2.0 moles of P4O10 react completely, it will produce 2.0 * 4 = 8.0 moles of H3PO4.
8 moles of H₃PO₄ are formed from2.0 moles of P₄0₁₀.
What is Mole?The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.
A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.
Given,
Moles of P₄O₁₀ = 2mol
Moles of H₂O = 8 mol
From the reaction,
1 mol of P₄O₁₀ forms 4 moles of H₃PO₄
Thus, 2 moles of P₄O₁₀ will form 4 × 2 moles
= 8 moles of H₃PO₄
Therefore, 8 moles of H₃PO₄ are formed from2.0 moles of P₄0₁₀.
Learn more about Moles, here:
https://brainly.com/question/31597231
#SPJ5
A latex balloon with a fixed amount of gas is at 20 degrees Celsius. The latex balloon is placed in a pan of 92 degrees Celsius water.
Describe what happens to the balloon in the hot water.
Explain what happens to the pressure, volume, and temperature of the gas inside the balloon.
Explain what happens to the air molecules inside the balloon. You can diagrams to help you answer this question.
The gas inside the balloon exerts extra pressure on its walls as a result of the increased molecular mobility, which causes the balloon to expand.
What is the motion causes to the gas inside the balloon?Pressure: As the temperature of the gas inside the balloon increases, the pressure of the gas also increases.
This is because the gas molecules gain kinetic energy with the increase in temperature, resulting in more frequent and forceful collisions with the walls of the balloon. This leads to an increase in pressure inside the balloon, causing it to expand.
Volume: Due to the increase in pressure inside the balloon, the volume of the gas inside the balloon also increases. The balloon expands and stretches to accommodate the increased volume of the gas.
Temperature: The temperature of the gas inside the balloon also increases as it absorbs heat from the hot water.
However, the rate of increase in temperature may be slower compared to the water temperature due to the heat capacity of the balloon material and the heat transfer rate.
Therefore, This increased molecular motion causes the gas inside the balloon to exert more pressure on the walls of the balloon, resulting in the expansion of the balloon.
Learn more about gas here:
https://brainly.com/question/30888126
#SPJ1
1) Photosynthesis can be represented by
6C02 (g) + 6 H20 (1) = C6H1206(s) + 602(g)
ЛН° = 2801 kJ
Explain how the equilibrium would be affected by the following changes:
a) partial pressure of CO2 is increased
b) 02 is removed from the mixture
c) part of the C6H1206(s) is removed from the mixture
d) more water is added
e) a catalyst is added
f) temperature is decreased.
The effect on equilibrium in the following cases: a)the equilibrium would shift towards the product side (right), b) shift towards the product side (right), c) shift towards the reactant side (left), d) shift towards the reactant side (left), e) it would not affect the position of the equilibrium, f) the equilibrium would shift towards the reactant side (left).
What is photosynthesis?Photosynthesis is the process by which plants, algae, and some bacteria convert light energy into chemical energy. During photosynthesis, light energy is absorbed by pigments called chlorophyll, which is located in the chloroplasts of plant cells. This energy is then used to power a series of chemical reactions that convert carbon dioxide and water into glucose (a type of sugar) and oxygen.
The overall equation for photosynthesis is:
6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂
In this equation, carbon dioxide (CO₂) and water (H₂O) are combined in the presence of light energy to produce glucose (C₆H₁₂O₆ ) and oxygen (O₂). The glucose produced by photosynthesis is used by the plant as a source of energy, while the oxygen is released into the atmosphere as a byproduct. Photosynthesis plays a vital role in the Earth's carbon cycle and is responsible for producing the oxygen that is essential for life on Earth.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ1
since the ripple formed is a type of mechanical wave, what might the ripples behavior indicate about how a mechanical wave moves through a medium
The behavior of ripples can provide us with insights into how mechanical waves move through a medium.A disturbance on a liquid's surface causes ripples to form, which move away from the disturbance location.
they are a type of mechanical wave, these ripples need a medium to move through it. The liquid serves as the medium when ripples are present.
In this scenario, the liquid is the medium through which the wave energy is being transported, as shown by the motion of the ripples. The liquid's surface begins to move up and down as the ripples leave the disturbance source and create local displacements. Energy is transferred from one liquid particle to another as a result of this motion in a direction that is orthogonal to the direction of wave propagation.
The behavior of the ripples can also tell us about other properties of mechanical waves, such as their speed and frequency. For example, the distance between successive ripples (wavelength) and the time it takes for successive ripples to pass a given point (period) can be used to determine the speed and frequency of the wave.
Learn more about ripples here:
https://brainly.com/question/31086565
#SPJ1
NEED HELP ASAP!!! 50 points!! & will be marked the brainlyest
The answer is too long and I faced error while submitting the answer
So
I took screenshots of the answer and uploaded it as pics
the pictures are organized by numbers (1,2,3,4 and 5)
hope you find this easy to understand....
Have any questions? Write in the comments.
give me brainliest if you found this answer useful
an atomic cation with a charge of has the following electron configuration: what is the chemical symbol for the ion? how many electrons does the ion have? how many electrons are in the ion?
The ion, Mg2+, has 10 electrons.
When answering questions on Brainly, a question answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and avoid providing extraneous amounts of detail. Typos and irrelevant parts of the question should also be ignored.
Furthermore, the following terms should be used in your answer: Student question: an atomic cation with a charge of has the following electron configuration: what is the chemical symbol for the ion?
how many electrons does the ion have? how many electrons are in the ion?In the given scenario, an atomic cation with a charge of 2+ has the following electron configuration:
1s22s22p6. The chemical symbol for the ion is Mg2+.
This cation, Mg2+, has lost 2 electrons from the neutral atom magnesium (Mg), which has 12 electrons in total.
To learn more about : electrons
https://brainly.com/question/26084288
#SPJ11
Determine the specific heat of a material if a 35g sample absorbed 48j as it was heated from 293k to 313k
Therefore, the specific heat of the material is approximately 68.57 J/(kg·°C).
How can you tell what a material's particular heat is?C = Q /(m T) is the equation for the specific heat capacity of a material with mass m. where Q is the additional energy and T is the temperature difference.
We can use the formula for heat:
Q = mcΔT
In this instance, we are aware that a 35 g sample, heated from 293 K to 313 K, received 48 J. We can enter these numbers into the algorithm to find c:
48 J = (35 g) x c x (313 K - 293 K)
First, we must convert the temperature differential from Kelvin to Celsius as well as the mass from grammes to kilogrammes:
48 J = (0.035 kg) x c x (20 °C)
48 J = (0.7 kg·°C) x c
c = 48 J / (0.7 kg·°C)
c ≈ 68.57 J/(kg·°C)
To know more about specific heat visit:-
https://brainly.com/question/2292859
#SPJ1
4. 0.360 g of a diatomic gas occupies 125.0 ml at 23.0oc and 750. torr. what is the molar mass of the gas? what diatomic gas is it?
Answer:
The molar mass of the gas is closest to that of molecular bromine (Br2), which has a molar mass of 159.8 g/mol. Therefore, the diatomic gas is likely to be bromine.
Explanation:
To solve this problem, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas. The ideal gas law is given by:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature and volume to Kelvin and liters, respectively:
T = 23.0°C + 273.15 = 296.15 K
V = 125.0 mL / 1000 mL/L = 0.125 L
Next, we can rearrange the ideal gas law to solve for the number of moles:
n = PV/RT
where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).
We can substitute the given values into this equation:
n = (750. torr)(0.125 L) / (0.08206 L·atm/(mol·K))(296.15 K) = 0.00408 mol
Now we can calculate the molar mass of the gas by dividing its mass by its number of moles:
molar mass = mass / moles
molar mass = 0.360 g / 0.00408 mol = 88.2 g/mol
The molar mass of the gas is 88.2 g/mol.
To determine the identity of the gas, we can compare its molar mass to the molar masses of common diatomic gases. The molar mass of the gas is closest to that of molecular bromine (Br2), which has a molar mass of 159.8 g/mol. Therefore, the diatomic gas is likely to be bromine.
The molar mass of the diatomic gas is approximately 67.9 g/mol. Considering common diatomic gases, it is likely to be Cl₂ (chlorine gas), which has a molar mass of 70.9 g/mol.
To determine the molar mass of the diatomic gas, we can use the Ideal Gas Law equation:
PV = nRT
First, we need to convert the given information to appropriate units.
1. Volume (V): 125.0 mL = 0.125 L (1 L = 1000 mL)
2. Temperature (T): 23.0 °C = 296.15 K (K = °C + 273.15)
3. Pressure (P): 750 torr = 0.9869 atm (1 atm = 760 torr)
Now we can rearrange the Ideal Gas Law equation to solve for n (moles of gas):
n = PV / RT
Plugging in the given values:
n = (0.9869 atm)(0.125 L) / (0.0821 L atm/mol K)(296.15 K)
n ≈ 0.0053 moles
Now, we can find the molar mass (MM) of the diatomic gas using the given mass and the calculated moles:
MM = mass/moles
MM = 0.360 g / 0.0053 moles
MM ≈ 67.9 g/mol
to know more about Ideal Gas Law refer here:
https://brainly.com/question/28257995#
#SPJ11
if you mixed 5.0 mol b, 0.10 mol c, and 0.0010 mol a in a one-liter container, which direction would the reaction initially proceed? responses
The direction in which the reaction will initially proceed depends on the value of the equilibrium constant (K). If you know K, compare it with the calculated reaction quotient (Q = 20) to determine the direction of the reaction.
To determine the direction in which the reaction will proceed, we need to compare the initial reaction quotient (Q) with the equilibrium constant (K).
Step 1: Calculate the initial concentrations of the reactants and products
Since all substances are mixed in a one-liter container, their concentrations are as follows:
[A] = 0.0010 mol/L
[B] = 5.0 mol/L
[C] = 0.10 mol/L
Step 2: Determine the reaction quotient (Q) using the given concentrations
The reaction quotient is calculated using the formula Q = [C]/([A]*[B]). Plug in the concentrations from step 1:
Q = (0.10) / (0.0010 * 5.0) = 0.10 / 0.005 = 20
Step 3: Compare Q with the equilibrium constant (K)
Without the specific equilibrium constant (K) for the reaction, we cannot provide a definitive answer. However, based on the value of Q, we can infer the following:
- If Q < K, the reaction will proceed forward (to the right) to reach equilibrium.
- If Q > K, the reaction will proceed backward (to the left) to reach equilibrium.
- If Q = K, the reaction is already at equilibrium.
for more such questions on equilibrium constant :
https://brainly.com/question/3159758
#SPJ11
which of the following do not increase the solubility of a gas in a liquid? select all that apply. select all that apply: decreased volume of the gas, with pressure and temperature held constant. increased partial pressure of the gas decreased temperature decreased partial pressure of the gas
These factors do not increase the solubility of a gas in a liquid, decreased volume of the gas, with pressure and temperature held constant and decreased partial pressure of the gas. Option a and d are correct choices.
Increased partial pressure of the gas: According to Henry's Law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Therefore, increasing the partial pressure of the gas will increase its solubility in the liquid.
Decreased temperature: As temperature decreases, the solubility of gases in liquids increases. This is because gases are more soluble in colder liquids than in warmer liquids. Therefore, decreasing the temperature will increase the solubility of the gas in the liquid.
Decreased partial pressure of the gas: As mentioned before, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Therefore, decreasing the partial pressure of the gas will decrease its solubility in the liquid.
Decreased volume of the gas, with pressure and temperature held constant: According to Boyle's Law, the volume of a gas is inversely proportional to its pressure, when temperature is held constant. Therefore, decreasing the volume of the gas while keeping pressure and temperature constant will increase the pressure of the gas. This increase in pressure will tend to decrease the solubility of the gas in the liquid. Hence option a and d are correct.
To know more about solubility, here
brainly.com/question/15560070
#SPJ4
What kind of energy is stored in the peanuts? What kinds of energy is it transformed into? Explain the differences in the results.
Answer:
The Peanut contains chemical energy and when consumed will be turned into kenetic energy
g when the following skeletal equation is balanced under acidic conditions, what are the coefficients of the species shown? ni2 zn ni zn2 water appears in the balanced equation as a fill in the blank 5 (reactant, product, neither) with a coefficient of . (enter 0 for neither.) which species is the reducing agent?
Coefficients: Ni2+ (aq) + Zn(s) → Ni(s) + Zn2+ (aq); Water: neither, coefficient=0; Reducing agent: Zn.
The fair condition for the given skeletal condition is:
Ni2+ (aq) + Zn (s) → Ni (s) + Zn2+ (aq)
The coefficients of the species shown are 1 for Ni2+, 1 for Zn, 1 for Ni, and 1 for Zn2+.Water doesn't show up in the decent condition since it isn't associated with the response.The lessening specialist is Zn since it loses electrons and goes through oxidation. In this response, Zn is oxidized from its essential state to shape Zn2+ particles, while Ni2+ particles are diminished to frame Ni metal.Generally, the decent condition shows a solitary relocation response where Zn replaces Ni2+ in answer for structure Zn2+ and Ni metal.
To learn more about equation balanced under acidic conditions, refer:
https://brainly.com/question/30216035
#SPJ4
suppose you have an avogadro's number of carbon atoms. how many grams does this represent? report your answer to two decimal places.
The mass of an Avogadro's number of carbon atoms is approximately 12.01 grams, rounded to two decimal places.
An Avogadro's number of any substance contains 6.022 x [tex]10^{23}[/tex] particles (atoms, molecules, or ions). In this case, you have an Avogadro's number of carbon atoms. To find the mass in grams, you need to know the molar mass of carbon.
Carbon has a molar mass of 12.01 grams per mole (g/mol). Since you have one mole of carbon atoms (as defined by Avogadro's number), the mass of these carbon atoms would be:
Mass = (1 mole) x (12.01 g/mol) = 12.01 grams.
Therefore, the mass of an Avogadro's number of carbon atoms is approximately 12.01 grams, rounded to two decimal places.
Know more about Avogadro's number here :
brainly.com/question/1513182
#SPJ11
predict: which substance (copper, granite, or lead) do you think will have the highest specific heat capacity? why?
I would predict that copper will have the highest specific heat capacity among copper, granite, and lead.
This is because metals generally have higher specific heat capacities than nonmetals, and copper is a metal. Copper is also known to have a relatively high specific heat capacity compared to other metals, making it a good conductor of heat and able to absorb and retain thermal energy well. On the other hand, lead has a relatively low specific heat capacity, and granite, being a type of rock, will likely have a moderate specific heat capacity but still lower than copper.
Learn more about heat capacity
https://brainly.com/question/28302909
#SPJ4
a current of 5.41 a is passed through a ni(no3)2 solution for 1.90 h . how much nickel is plated out of the solution
A student asked about the amount of nickel plated out of a Ni(NO3)2 solution when a current of 5.41 A is passed through it for 1.90 hours.
To determine this, we can use Faraday's laws of electrolysis.
First, we need to find the charge passed through the solution. Charge (Q) can be calculated using the formula Q = I × t, where I is the current and t is the time in seconds. Since 1 hour is equal to 3600 seconds, 1.90 hours is equal to 1.90 × 3600 = 6840 seconds.
Now we can calculate the charge: Q = 5.41 A × 6840 s = 36996 Coulombs.
Next, we need to determine the amount of nickel deposited. The relationship between charge and moles of substance can be described using Faraday's constant (F), which is approximately 96485 Coulombs/mol of electrons. The balanced half-reaction for the reduction of Ni(II) ions is:
Ni(II) + 2e- → Ni(s)
Thus, 2 moles of electrons are needed to deposit 1 mole of nickel. Now we can calculate the moles of nickel
Moles of Ni = (Q × (1 mole Ni / (2 moles e-))) / F = (36996 C × (1 mole Ni / (2 moles e-))) / 96485 C/mol = 0.1918 moles Ni.
Finally, we need to convert moles of nickel to grams. The molar mass of nickel is 58.69 g/mol. So, the mass of nickel deposited is
Mass of Ni = moles of Ni × molar mass = 0.1918 moles × 58.69 g/mol = 11.26 grams.
Therefore, 11.26 grams of nickel is plated out of the Ni(NO3)2 solution when a 5.41 A current is passed through it for 1.90 hours.
Know more about Faraday's laws here:
https://brainly.com/question/17012638
#SPJ11
t required 10.00 ml of 0.250 m ca( oh ) 2 50.00 ml of hcl (to the equivalence point). what was the original concentration of the hcl?
The original concentration of the HCl is 0.100 mol/L. In this problem, we can use the balanced chemical equation for the reaction between calcium hydroxide (Ca (OH)2) and hydrochloric acid (HCl) to determine the amount of moles of HCl required to react completely with Ca (OH)2.
Ca(OH)2 + 2HCl -> CaCl2 + 2H2O
From the equation, we can see that one mole of Ca(OH)2 reacts with 2 moles of HCl. Therefore, the number of moles of HCl required to react completely with the given amount of Ca(OH)2 is:
moles of HCl = (0.250 mol/L) x (0.01000 L) x 2 = 0.005 mol
Since the volume of HCl used is 50.00 ml (0.05000 L) at the equivalence point, we can calculate the original concentration of the HCl as follows:
0.005 mol / 0.05000 L = 0.100 mol/L
To know more about chemical equation:
https://brainly.com/question/28294176
#SPJ4
1. Matching.
Complete the blanks according to the Hall-Héroult process along with the Bayer process.
Cool the ______ complex to allow the aluminum hydroxide to precipitate.
Dissolve the aluminum oxide in ______.
Separate the aluminum from the ______ by electrolysis in an electrolytic cell.
Mix the bauxite ore with _____ sodium hydroxide to form sodium aluminum hydroxide complex.
Heat the Al(OH)3 to drive _____, leaving Al2O3.
________ out the
complex to allow the aluminum hydroxide to precipitate.
by electrolysis in an electrolytic cell.
Cool the bauxite complex to allow the aluminum hydroxide to precipitate.Dissolve the aluminum oxide in molten cryolite. Separate the aluminum from the oxide by electrolysis in an electrolytic cell.
How is electrolysis carried out?A trained electrologist inserts a short wire into the hair follicles that are located at the skin's surface. An electric current that exits the follicle and travels down the wire damages the hair root. Damage to the follicles prevents the growth of new hair and causes the existing hair to fall out.
The main industrial procedure for smelting aluminum is called the Hall-Héroult process. It entails dissolving aluminum oxide (alumina), which is most frequently derived from bauxite, the primary ore of aluminum, using the Bayer process, in molten cryolite, and electrolyzing the molten salt bath, usually in a cell that has been specifically designed for the purpose.
Mix the bauxite ore with concentrated sodium hydroxide to form sodium aluminum hydroxide complex.
Heat the Al(OH)3 to drive off water, leaving Al2O3.
Filter out the sodium aluminum hydroxide complex to allow the aluminum hydroxide to precipitate.
Electrolyze the aluminum oxide in the presence of cryolite in an electrolytic cell.
To know more about Electrolyze visit :
brainly.com/question/16889766
#SPJ1
the formula of acetic acid found in vinegar is ch3cooh. only hydrogen in the molecule acts as an acid hydrogen. which one is donated
Acetic acid donates only the hydrogen atom bonded to the oxygen atom, because the oxygen is more electronegative and better accommodates a negative charge after the bond is broken.
In acetic acid, there are 4 hydrogen atom, but it acts as a monoprotic acid. Three of the hydrogen atoms is bonded to the carbon atom and one hydrogen atom is bonded to the oxygen atom. The electronegativity difference between carbon and hydrogen is much less than that between oxygen and hydrogen.
As a highly electronegative atom, oxygen tends to pull the electrons in the O-H bond to itself. Due to this, the hydrogen will be loosely bound compared to that bonded with carbon. Also the oxygen is capable of accommodating the negative charge after the bond is broken.
So acetic acid is a monoprotic acid and only one hydrogen gets donated.
For more information regarding electronegativity, kindly refer
https://brainly.com/question/17762711
#SPJ4