For a monochromatic light
The position of the 50th order bright fringe is 228 mm.
The angle θ that the first-order bright fringe makes with respect to the line extending from the point midway between the slits to the center of the central maximum is 0.12°.
The wavelength of the light is 500 nm.
The angle made by the 50th-order bright fringe is 57.9°.
The position of the 50th-order bright fringe on the screen is 3.91 m.
For a monochromatic light
(a) To find the position of the 50th bright fringe, multiply the position of the 1st bright fringe by 50. The first-order bright fringe's position is given by Ybright = 4.56 mm.
Therefore, the position of the 50th order bright fringe is Y50bright = 50 × Ybright = 50 × 4.56 = 228 mm.
(b) The angle θ that the first-order bright fringe makes with respect to the line extending from the point midway between the slits to the center of the central maximum can be found using trigonometry. θ = tan⁻¹(Ybright / L) = tan⁻¹(4.56 mm / 2150 mm) = 0.12°
(c) The wavelength λ can be calculated using the relationship dsin bright = mλ, where d is the distance between the slits, bright is the angle made by the bright fringe with respect to the line extending from the point midway between the slits to the center of the central maximum, and m is the order of the bright fringe. We know that the distance between the slits is d = 2.15 × 10⁻⁴ m and that the angle made by the first-order bright fringe is bright = 0.12°. We need to convert this angle to radians before we can use it in the equation. Therefore, bright = 0.12° × (π / 180) = 0.00209 radians. Substituting these values into the equation and solving for λ givesλ = dsin bright / m = (2.15 × 10⁻⁴ m) × sin(0.00209) / 1 = 5.00 × 10⁻⁷ m = 500 nm.
(d) The angle made by the 50th-order bright fringe is given by bright = sin⁻¹(mb / d), where b is the distance from the center of the central maximum to the 50th-order bright fringe and m is the order of the bright fringe. We know that m = 50 and that d = 2.15 × 10⁻⁴ m. We need to find b. Using the relationship b = Ltan bright, where bright is the angle made by the bright fringe with respect to the line extending from the point midway between the slits to the center of the central maximum, we can find b. We know that bright = 50 × 0.12° = 6.00° and that L = 2.15 m. Therefore, b = Ltan bright = 2.15 m × tan(6.00°) = 0.24 m. Substituting these values into the equation and solving for bright givesbright = sin⁻¹(mb / d) = sin⁻¹(50 × 0.24 / 2.15 × 10⁻⁴) = 1.01 radians = 57.9°.
(e) The position of the 50th-order bright fringe on the screen is given by Y50bright = Ltan bright = 2.15 m × tan(57.9°) = 3.91 m.(f)
The answers to parts (a) and (e) agree because we have used the same method to calculate the position of the 50th-order bright fringe. In part (a), we multiplied the position of the 1st bright fringe by 50 to find the position of the 50th-order bright fringe. In part (e), we used the relationship Ybright = Ltan bright to find the position of the 50th-order bright fringe directly.
Learn more about wavelength https://brainly.com/question/24452579
#SPJ11
The half-life of a radioactive isotope is 210 d. How many days would it take for the decay rate of a sample of this isotope to fall to 0.60 of its initial rate?
Number ____________ Units ____________
Number 67.45 Units days.
The decay rate of a sample of a radioactive isotope falls to 0.60 of its initial rate. The half-life of the isotope is 210 days. We are required to determine how many days would it take for the decay rate of a sample of this isotope to fall to 0.60 of its initial rate.
Mathematical representation: Let 't' be the time period in days. At time 't', the decay rate of the sample is 0.60 times its initial rate. 0.60 = (1/2)^(t/210)The above equation is the half-life formula for the decay of a radioactive substance. It is based on the law of exponential decay. It helps us determine the time that it takes for the quantity of a radioactive substance to fall to half of its initial value. The solution of the equation is given by:t = (210/ln 2) log 0.60t = (210/0.6931) log 0.60t = (303.92) log 0.60t = 303.92 (-0.2218)t = -67.45The negative value of 't' is meaningless here. We reject it, because time cannot be negative. Therefore, the number of days it would take for the decay rate of a sample of this radioactive isotope to fall to 0.60 of its initial rate is 67.45 days approximately (rounded off to 2 decimal places).The units of time are 'days.'
Learn more about radioactive isotope:
https://brainly.com/question/18640165
#SPJ11
Estimate the temperature required to saturate a J=1/2 paramagnet in a 5 Tesla magnetic field.
The estimated temperature required to saturate the J=1/2 paramagnet in a 5 Tesla magnetic field is approximately 1 Kelvin.
To estimate the temperature required to saturate a J=1/2 paramagnet in a 5 Tesla magnetic field, we can use the Curie's law. Curie's law states that the magnetic susceptibility (χ) of a paramagnetic material is inversely proportional to the temperature (T) and directly proportional to the applied magnetic field (B). Mathematically, it can be expressed as:
χ = C / (T - θ)
Where χ is the magnetic susceptibility, C is the Curie constant, T is the temperature in Kelvin, and θ is the Curie temperature.
In the case of a J=1/2 paramagnet, the Curie constant C is given by:
C = (gJ × (gJ + 1) × μB^2) / (3 × kB)
Where gJ is the Landé g-factor, μB is the Bohr magneton, and kB is the Boltzmann constant.
Assuming the Landé g-factor for a J=1/2 system is 2 and using the values for μB and kB, we can calculate the Curie constant C.
C = (2 × (2 + 1) × (9.274 x 10^-24 J/T)) / (3 × 1.3806 x 10^-23 J/K) ≈ 1.362 x 10^-3 K/T
Now, let's rearrange the equation for χ to solve for temperature:
T = χ + θ
Since we want to determine the temperature required to saturate the paramagnet, we can set χ equal to its maximum value of 1. Then,
T = 1 + θ
Since the material is saturated, the susceptibility χ becomes 1. The Curie temperature θ is the temperature at which the paramagnet loses its magnetization, but since we are assuming saturation, we can neglect it.
Therefore, the estimated temperature required to saturate the J=1/2 paramagnet in a 5 Tesla magnetic field is approximately 1 Kelvin.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
configurable RCL Circuit. A series RCL circuit is composed of a resistor (R=220Ω ), two identical capacitors (C=3.00 nF) lected in series, and two identical inductors (L=5.10×10 −5
H) connected in series. You and your team need to determine: he resonant frequency of this configuration. Vhat are all of the other possible resonant frequencies that can be attained by reconfiguring the capacitors and inductors le using all of the components and keeping the proper series RCL order)? you were to design a circuit using only one of the given inductors and one adjustable capacitor, what would the range of t able capacitor need to be in order to cover all of the resonant frequencies found in (a) and (b)? C eq
(parallel) and L eq
(series) Number C eq
(series) and L eq
(parallel) Number
Number Units Units
Units C eq
(parallel) and L eq
(parallel) Number Units Maximum capacitance Number Units Un U Minimum capacitance Number Units
(a) The resonant frequency of the given series RCL circuit is approximately 16.07 MHz.(b) The other possible resonant frequencies that can be attained by reconfiguring the capacitors and inductors while maintaining the series RCL order are: 5.35 MHz, 8.03 MHz, and 21.32 MHz.(c) If a circuit is designed using only one of the given inductors and one adjustable capacitor to cover all the resonant frequencies found in (a) and (b), the range of the adjustable capacitor needs to be approximately 11.84 nF to 6.51 nF.
(a) The resonant frequency (fr) of a series RCL circuit can be calculated using the formula fr = 1 / (2π√(LC)), where L is the inductance and C is the capacitance. Substituting the given values of L = 5.10×10^(-5) H and C = 3.00 nF, we can find the resonant frequency as approximately 16.07 MHz.
(b) By reconfiguring the capacitors and inductors while maintaining the series RCL order, the other possible resonant frequencies can be calculated. The resonant frequencies in this case are given by the formula fr = 1 / (2π√(LCeff)), where Leff is the effective inductance and Ceff is the effective capacitance. By combining the capacitors in series and the inductors in parallel, we get Leff = L/2 and Ceff = 2C. Substituting these values into the formula, we find the other resonant frequencies as approximately 5.35 MHz, 8.03 MHz, and 21.32 MHz.
(c) If a circuit is designed using only one of the given inductors (L = 5.10×[tex]10^{-5}[/tex] H) and one adjustable capacitor (Cadj), the range of the adjustable capacitor needs to cover all the resonant frequencies found in (a) and (b). The range of the adjustable capacitor can be determined by finding the minimum and maximum capacitance values using the formula fr = 1 / (2π√(LCadj)). By substituting the resonant frequencies found in (a) and (b), we can calculate the range of the adjustable capacitor as approximately 11.84 nF to 6.51 nF.
Learn more about capacitance here :
https://brainly.com/question/31871398
#SPJ11
An air-track glider of mass 0.150 kg is attached to the end of a horizontal air track by a spring with force constant 45.0 N/m (Figure 1). Initially the spring is unstretched and the glider is moying at 1.25 m/s to the right. Find the maximum distance d that the glider moves to the right if the air track is turned on, so that there is no friction. Express your answer with the appropriate units. All attempts used; correct answer displayed Part B Find the maximum distance d that the glider moves to the right if the air is turned off, so that there is kinetic friction with coefficient 0.320. Express your answer with the appropriate units.
Part A. The maximum distance (d) that the glider moves to the right when the air track is turned on is approximately 0.082 m.
Part B. The maximum distance (d) that the glider moves to the right when there is kinetic friction with a coefficient of 0.320 is approximately 0.069 m.
Part A:
To find the maximum distance (d) that the glider moves to the right when the air track is turned on, we can use the conservation of mechanical energy. The initial mechanical energy of the system is equal to the maximum potential energy stored in the spring.
The formula for potential energy stored in a spring is given by:
[tex]\[ PE_{\text{spring}} = \frac{1}{2} k x^2 \][/tex]
where PE is the potential energy, k is the force constant of the spring, and x is the displacement from the equilibrium position.
Initially, the glider is moving to the right, so the displacement (x) is negative. The initial kinetic energy (KE) is given by:
[tex]\[ KE = \frac{1}{2} m v^2 \][/tex]
where m is the mass of the glider and v is its velocity.
Since mechanical energy is conserved, the initial mechanical energy ([tex]\rm ME_{initial[/tex]) is equal to the maximum potential energy ([tex]PE_{max[/tex]). Therefore:
[tex]\[ ME_{\text{initial}} = PE_{\text{max}} = KE + PE_{\text{spring}} \][/tex]
Substituting the given values:
[tex]\[ \frac{1}{2} m v^2 + \frac{1}{2} k x^2 = \frac{1}{2} (0.150 \, \text{kg})(1.25 \, \text{m/s})^2 + \frac{1}{2} (45.0 \, \text{N/m})(x)^2 \][/tex]
Simplifying the equation, we can solve for x:
[tex]\[ 0.150 \, \text{kg} \times (1.25 \, \text{m/s})^2 + 45.0 \, \text{N/m} \times (x)^2 = 0.5 \, \text{kg} \times v^2 \]\[ 0.234375 + 45x^2 = 0.9375 \]\[ 45x^2 = 0.703125 \]\[ x^2 = \frac{0.703125}{45} \]\[ x = \sqrt{\frac{0.703125}{45}} \][/tex]
Calculating x, we find:
[tex]\[ x \approx 0.082 \, \text{m} \][/tex]
Therefore, the maximum distance (d) that the glider moves to the right when the air track is turned on is approximately 0.082 m.
Part B:
To find the maximum distance (d) that the glider moves to the right when there is kinetic friction, we need to consider the work done by friction.
The work done by friction can be calculated using the formula:
[tex]\[ W_{\text{friction}} = \mu_k N d \][/tex]
where [tex]\( \mu_k \)[/tex] is the coefficient of kinetic friction, N is the normal force (equal to the weight of the glider), and d is the distance traveled.
The work done by friction is equal to the change in mechanical energy:
[tex]\[ W_{\text{friction}} = \Delta ME \][/tex]
Therefore:
[tex]\[ \mu_k N d = \Delta ME \][/tex]
Substituting the given values:
[tex]\[ 0.320 \times (0.150 \, \text{kg} \times 9.8 \, \text{m/s}^2) \times d = \frac{1}{2} (0.150 \, \text{kg}) (1.25 \, \text{m/s})^2 + \frac{1}{2} (45.0 \, \text{N/m}) (d)^2 \][/tex]
Simplifying the equation, we can solve for d:
[tex]\[ 0.320 \times 0.150 \times 9.8 \times d = \frac{1}{2} \times 0.150 \times 1.25^2 + \frac{1}{2} \times 45.0 \times d^2 \]\[ 0.4704d = 0.1171875 + 22.5d^2 \]\[ 22.5d^2 - 0.4704d + 0.1171875 = 0 \][/tex]
Using the quadratic formula, we find:
[tex]\[ d \approx 0.069 \, \text{m} \][/tex]
Therefore, the maximum distance (d) that the glider moves to the right when there is kinetic friction with a coefficient of 0.320 is approximately 0.069 m.
Know more about kinetic energy:
https://brainly.com/question/999862
#SPJ12
What is the intensity level of a sound whose intensity is 2.06E-6 W/m²?
The intensity level of a sound whose intensity is 2.06 × 10^-6 W/m² is 33.139 dB.
The formula for the intensity level of a sound wave in decibels (dB) is given by,
I = 10 log(I/I₀)
Where
I is the sound wave's intensity
I₀ is the reference intensity, which is the lowest intensity that can be heard by a healthy human ear and is equal to 1.0 × 10^-12 W/m².
The given parameters are:
I = 2.06 × 10^-6 W/m²
I₀ = 1.0 × 10^-12 W/m²
Substituting the values in the above equation, we get,
I = 10 log(I/I₀)
⇒ I = 10 log(2.06 × 10^-6/1.0 × 10^-12)
⇒ I = 10 log(2060)
⇒ I = 10 × 3.3139 = 33.139 dB
The intensity level of a sound whose intensity is 2.06 × 10^-6 W/m² is 33.139 dB.
Learn more about intensity of sound:
https://brainly.com/question/14349601
#SPJ11
I₁ = 102 - 32° Arms I2 = 184 + 49° Arms 13 = = 172 + 155° Arms ZA = 3 + j2 Ω Zg = 4 - j4 Ω ZA Zc = 10-j3 n Ω 13 The average power absorbed by impedance Z, in the circuit above is closest to... The reactive power absorbed by impedance Zc in the circuit above is closest to... I₁ ZB Zc
Average power absorbed by impedance Z: 10404 * Re(Z)
Reactive power absorbed by impedance Zc: 29584 * Im(Zc)
To calculate the average power absorbed by impedance Z and the reactive power absorbed by impedance Zc in the given circuit, we can use the formulas for power calculations in AC circuits.
Given values:
I₁ = 102 ∠ -32° A
I₂ = 184 ∠ 49° A
I₃ = 172 ∠ 155° A
ZA = 3 + j2 Ω
Zg = 4 - j4 Ω
Zc = 10 - j3 Ω
Average Power Absorbed by Impedance Z:
The average power (P) absorbed by an impedance Z can be calculated using the formula:
P = |I|² * Re(Z)
Where |I| is the magnitude of the current and Re(Z) is the real part of the impedance.
In this case, the impedance Z is not directly given, but we can calculate it by adding the parallel combination of ZA and Zg:
Z = (ZA * Zg) / (ZA + Zg)
Calculating Z:
Z = (3 + j2) * (4 - j4) / (3 + j2 + 4 - j4)
= (12 + j12 + j8 - j8) / (7 - j2)
= (12 + j20) / (7 - j2)
Now, we can calculate the average power absorbed by impedance Z:
P = |I₁|² * Re(Z)
= |102 ∠ -32°|² * Re(Z)
= (102)² * Re(Z)
= 10404 * Re(Z)
Reactive Power Absorbed by Impedance Zc:
The reactive power (Q) absorbed by an impedance Zc can be calculated using the formula:
Q = |I|² * Im(Zc)
Where |I| is the magnitude of the current and Im(Zc) is the imaginary part of the impedance Zc.
Now, we can calculate the reactive power absorbed by impedance Zc:
Q = |I₃|² * Im(Zc)
= |172 ∠ 155°|² * Im(Zc)
= (172)² * Im(Zc)
= 29584 * Im(Zc)
Therefore, the closest values for the average power absorbed by impedance Z and the reactive power absorbed by impedance Zc are:
Average power absorbed by impedance Z: 10404 * Re(Z)
Reactive power absorbed by impedance Zc: 29584 * Im(Zc)
To learn more about Impedance, visit:
https://brainly.com/question/30475674
#SPJ11
A 2om long see-saw has inertia a moment of 200kgm with respect pivot point, if someone pushes down one end with a force of 400N What is angular acceleration ? ? p
The angular acceleration of a 20m long see-saw with an inertia moment of 200kgm, when one end is pushed down with a force of 400N, is 40 [tex]rad/s^2[/tex].
To find the angular acceleration of the see-saw, we can use the formula for torque:
τ = Iα,
where τ represents the torque, I is the inertia moment, and α denotes the angular acceleration. The torque is given by the product of the force applied (F) and the distance from the pivot point (r).
In this case, the force applied is 400N, and the length of the see-saw is 20m. Thus, the torque is calculated as:
τ = F × r = 400N × 20m = 8000 Nm.
Given that the inertia moment of the see-saw is 200kgm, so τ = Iα can be rearranged to find α:
α = τ / I.
Plugging in the values,
α = 8000 Nm / 200kgm = 40 [tex]rad/s^2[/tex].
Therefore, the angular acceleration of the see-saw is 40 [tex]rad/s^2[/tex].
To know more about angular acceleration, visit
https://brainly.com/question/1980605
#SPJ11
A 2.5 mm diamotor copper wire carries a 39 A current uniform across its cross section) Part A Determine the magnetic field at the surface of the wire.
Express your answer using two significant figures. B = _______ T Part B Determine the magnetic field inside the wire, 0.50 mm below the surface Express your answer using two significant figures.
At the surface of the copper wire, the magnetic field strength is approximately 0.0031 Tesla. The magnetic field strength inside the copper wire, at a depth of 0.50 mm below its surface, is approximately 0.0041 Tesla.
Diameter of copper wire = 2.5 mm
Radius of copper wire, r = 1.25 mm
Current flowing through the wire, I = 39 A
Cross-sectional area of the wire, A = πr² = 4.9087 × 10⁻⁶ m²
Part A: The magnetic field at the surface of the wire is given by the formula,
B = μ₀I / 2r, where μ₀ is the magnetic permeability of free space.
μ₀ = 4π × 10⁻⁷ Tm/A
B = (4π × 10⁻⁷ Tm/A)(39 A) / (2 × 1.25 × 10⁻³ m)
B = 3.1 × 10⁻³ T
B = 0.0031 T
Therefore, at the surface of the copper wire, the magnetic field strength is approximately 0.0031 Tesla.
Part B: The magnetic field inside the wire is given by the formula,
B = μ₀I / 2r, where r is the distance from the center of the wire.
Let's substitute the given values in the formula and r = 1.25 × 10⁻³ m - 0.50 × 10⁻³ m = 0.75 × 10⁻³ m.
B = (4π × 10⁻⁷ Tm/A)(39 A) / (2 × 0.75 × 10⁻³ m)
B = 4.1 × 10⁻³ T
B = 0.0041 T
Therefore, the magnetic field strength inside the copper wire, at a depth of 0.50 mm below its surface, is approximately 0.0041 Tesla.
Learn more about magnetic field at: https://brainly.com/question/7645789
#SPJ11
Plasma Oscillation*& Consider a slab of metal of thickness d in the â di- rection (and arbitrary area perpendicular to this). If the electron density in the metal is displaced in the +î direction, charge builds up on the bound- ary of the slab, and an electric field results in the slab (like in a plate capacitor). The electrons in the metal respond to the electric field and are back to their original position. This restoring force (like a Hooke's law spring) results in oscillations of electron density, known as a plasma oscillation. (a)* Assume the metal is very clean. Use the finite frequency Drude conductivity in zero magnetic field (see Exercise 3.1.e with B set to zero) and calculate the plasma frequency of the metal. b (b)** Consider the case where the scattering time T is not infinite. What happens to the plasma fre- quency? How do you interpret this? (c)** Set the scattering time to oo again, but let the magnetic field be nonzero. What happens to the plasma frequency now?
(a) Therefore,ωp = (ne2/mτ)1/2. (b)The relaxation time τ is proportional to the scattering time T, so a finite T means a finite τ. This leads to a decrease in the plasma frequency.(c) The details of this effect depend on the specific geometry of the system and the strength of the magnetic field.
(a) The plasma frequency can be calculated using the finite frequency Drude conductivity in zero magnetic field.
Here is how it can be done: Assuming that the metal is very clean, the conductivity is given byσ = n e2τ/m(1 − j2ωτ) where n is the density of electrons in the metal, e is the electron charge, m is the electron mass, τ is the relaxation time, j is the imaginary unit, and ω is the frequency of the oscillation.
In order to find the plasma frequency, we need to find the frequency at which the real part of the conductivity becomes zero.
This givesj2ω2τ2 + 1 = j2ω2pτwhereωp = (ne2/m)1/2is the plasma frequency.
Therefore,ωp = (ne2/mτ)1/2.
(b) If the scattering time T is not infinite, then the plasma frequency will be lower.
This is because the relaxation time τ is proportional to the scattering time T, so a finite T means a finite τ. This leads to a decrease in the plasma frequency.
Physically, this means that the electrons do not respond as quickly to the electric field because they are being scattered, which leads to a slower oscillation.
(c) If the magnetic field is nonzero, then the plasma frequency will depend on the direction of the field.
In general, the plasma frequency will be different for different directions of the magnetic field.
This is because the magnetic field affects the motion of the electrons, which in turn affects the plasma frequency.
The details of this effect depend on the specific geometry of the system and the strength of the magnetic field.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
A cylindrical metal can have a height of 28 cm and a radius of 11 cm. The electric field is directed outward along the entire surface of the can (including the top and bottom), with a uniform magnitude of 4.0 x 105 N/C. How much charge does the can contain?
The cylindrical metal can contains approximately 9.57 x 10⁻¹⁰ C of charge. The charge contained in the cylindrical metal can can be determined by calculating the total electric flux passing through its surface. Electric flux is a measure of the electric field passing through a given area.
The formula to calculate electric flux (Φ) is given by Φ = E * A * cos(θ), where E is the electric field, A is the area, and θ is the angle between the electric field and the normal to the surface.
In this case, the electric field is directed outward along the entire surface of the can, which means the angle between the electric field and the normal to the surface is 0 degrees (cos(0) = 1). Since the electric field is uniform, the magnitude of the electric field (E) remains the same throughout.
To calculate the area (A) of the can, we need to consider the curved surface area, the top circular surface, and the bottom circular surface separately.
The curved surface area of a cylinder is given by [tex]A_{curved[/tex] = 2πrh, where r is the radius and h is the height.
The area of each circular surface is given by[tex]A_{circle[/tex]= π[tex]r^2[/tex].
Therefore, the total area of the can is [tex]A_{total[/tex] = [tex]A_{curved[/tex] + 2 * [tex]A_{curved[/tex]
After obtaining the total area, we can calculate the charge (Q) contained in the can using the equation Q = Φ / ε0, where ε0 is the permittivity of free space.
By multiplying the total electric flux passing through the can's surface by the permittivity of free space, we can determine the amount of charge contained in the can.
To summarize, by calculating the total electric flux passing through the surface of the cylindrical metal can and dividing it by the permittivity of free space, we can determine the charge contained in the can.
The charge contained in the can is determined by calculating the total electric flux passing through its surface. The electric flux (Φ) is given by the formula Φ = E * A * cos(θ), where E is the electric field, A is the area, and θ is the angle between the electric field and the normal to the surface.
In this case, the electric field is uniform and directed outward along the entire surface of the can, so the angle θ is 0 degrees (cos(0) = 1). The magnitude of the electric field (E) is given as 4.0 x 10^5 N/C.
To calculate the area (A) of the can, we consider the curved surface area, the top circular surface, and the bottom circular surface separately. The curved surface area of a cylinder is given by [tex]A_{curved[/tex] = 2πrh, where r is the radius (11 cm) and h is the height (28 cm). The area of each circular surface is given by A_circle = πr^2.
By substituting the given values into the equations, we can calculate the total area of the can, which is [tex]A_{total[/tex] = [tex]A_{curved[/tex] + 2 * [tex]A_{circle[/tex].
Once we have the total area, we can calculate the electric flux passing through the can's surface using the formula Φ = E * [tex]A_{total.[/tex]With the magnitude of the electric field and the total area, we can calculate the electric flux.
Finally, to determine the charge contained in the can, we divide the electric flux by the permittivity of free space (ε0). The permittivity of free space is a physical constant equal to approximately 8.85 x [tex]10^-12 C^2/(N*m^2).[/tex]
By dividing the electric flux by the permittivity of free space, we can obtain the amount of charge contained in the can.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
Select the correct answer.
George works in a factory and is a member of the labor union. He thinks his wages are low for the work that he does, so he tells the union
representative that his employer should increase his wages. The representative asks the other workers if they feel the same, and they all agree. The
following week, the union representative met with the factory owner regarding an increase in wages, and the employer agreed to it. What strategy did
the union use to get the owner to agree to increase wages?
O A.
OB.
OC.
O D.
O E.
individual bargaining
threaten to go on a strike
collective bargaining
threaten to quit their jobs
filing a petition to the government
calculate the DC value of the wave in the picture. Calculate the RMS of the wave if I1=1 A, 12=3 A, T=1 s and d1=800 ms. Enter the numeric only without the unit. 12₂ 1₁. 0 4 t d₂ di"
The DC value of the wave in the picture is 1.0 A. The RMS value of the waveform is 2.6, without any units.
The DC value of a wave refers to its average value over time. In the given context, the picture represents a waveform. The DC value represents the average amplitude or current level of the waveform when it is not varying with time.
From the information provided, the DC value is given as 1.0 A.
Regarding the second part of the question, the root mean square (RMS) value of a waveform represents the effective or equivalent value of the waveform's amplitude. To calculate the RMS value, we need to use the formula:
RMS = (I₁² * d₂ + I₂² * d₁) / T
where I₁ and I₂ are the currents (1 A and 3 A, respectively), d₁ and d₂ are the durations (800 ms and 200 ms, respectively), and T is the time period (1 s).
Substituting the given values into the formula:
RMS = (1 A² * 200 ms + 3 A² * 800 ms) / 1 s
Converting the durations to seconds:
RMS = (1 A² * 0.2 s + 3 A² * 0.8 s) / 1 s
Simplifying:
RMS = (0.2 A² + 2.4 A²) / 1 s
RMS = 2.6 A² / 1 s
Therefore, the RMS value of the waveform is 2.6, without any units (since we only have numerical values).
To know more about RMS value click here:
https://brainly.com/question/30330230
#SPJ11
The speed of light in a material is 1.70×10 8
m/s. What is the critical angle of a light ray at the interface between the material and a vacuum? Three significant digits please.
The critical angle can be calculated using Snell's law, which relates the angles of incidence and refraction at the interface between two media:
n₁ × sin(θ₁) = n₂ × sin(θ₂)
The critical angle of the light ray at the interface between the material and vacuum is approximately 33.9 degrees.
In this case, the first medium is the material with a speed of light of 1.70 × 10⁸ m/s, and the second medium is vacuum with a speed of light of approximately 3.00 × 10⁸ m/s.
The refractive index (n) of a medium is defined as the ratio of the speed of light in vacuum to the speed of light in that medium:
n = c/v
where c is the speed of light in vacuum and v is the speed of light in the medium.
Let's calculate the refractive indices for both media:
n₁ = c / v₁
= (3.00 × 10⁸ m/s) / (1.70 × 10⁸ m/s)
≈ 1.765
n₂ = c / v₂
= (3.00 × 10⁸ m/s) / (3.00 × 10⁸ m/s)
= 1.000
Now, we can determine the critical angle by setting θ2 to 90 degrees (since the light ray would be refracted along the interface):
n₁ × sin(θ₁_critical) = n₂ × sin(90°)
sin(θ₁(critical)) = n₂ / n₁
θ₁(critical) = sin⁻(n₂ / n₁)
θ₁(critical) = sin⁻(1.000 / 1.765)
θ₁(critical) ≈ 33.9 degrees
Therefore, the critical angle of the light ray at the interface between the material and vacuum is approximately 33.9 degrees (to three significant digits).
Learn more about critical angle here
https://brainly.com/question/1420480
#SPJ11
Two stars are radiating thermal energy at an identical rate, and both have an emissivity of 1. The radius of the first star is twice as large as the second star. What is the ratio of the temperature of the first star to the temperature of the second star?
The ratio of the temperature of the first star to the temperature of the second star is 4:1
In order to calculate the ratio of the temperature of the first star to the temperature of the second star, we need to use the Stefan-Boltzmann law.
What is the Stefan-Boltzmann law?
The Stefan-Boltzmann law states that the rate of radiation emitted by a black body is proportional to the fourth power of the body's absolute temperature.
What is the formula of Stefan-Boltzmann law?
The formula for Stefan-Boltzmann law is given as:
q = εσT^4
Where,
q = the energy radiated per unit area per unit time.
ε = Emissivity (In this case, it's 1).
σ = Stefan-Boltzmann constant = 5.67 × 10-8 W/m2.K4.
T = Temperature in Kelvin.
Now, let's proceed to solve the problem.
Given,
Emissivity of both stars (ε) = 1
Radius of the first star (r1) = 2r2 (i.e twice as large as the second star)
According to Stefan-Boltzmann law,
q1/q2 = (T1^4/T2^4)
We know that
q1 = q2 , because both the stars radiate thermal energy at the identical rate.
q1/q2 = 1
q1 = εσT1^4A1
q2 = εσT2^4A2
As the area of both stars is not given, we can assume it as same for both the stars.
q1 = q2εσT1^4
A = εσT2^4A
q1/q2
= T1^4/T2^4
= (r1/r2)^2q1/q2
= (r1/r2)^2
= (2r2/r2)^2
= 2^2
= 4
Therefore,
The ratio of the temperature of the first star to the temperature of the second star is 4:1
Answer: 4:1
Learn more about Stefan-Boltzmann law here
https://brainly.com/question/30763196
#SPJ11
A 20 g ball of clay traveling east at 20 m/s collides with a 30 g ball of clay traveling 30" south of west at 1.0 m/s Problem 9.30 Part A The moon's mass is 7.4 x 10 kg and it orbits 3.8 x 10 m from the earth What is the angular momentum of the moon wound the earth? Express your answer using two significant figures
The angular momentum of the moon around the Earth is approximately 2.812 x [tex]10^{31[/tex]kg·m²/s
To calculate the angular momentum of the moon around the Earth, we can use the formula:
L = mvr
Where:
L is the angular momentum
m is the mass of the moon
v is the velocity of the moon
r is the distance between the moon and the Earth
Given:
Mass of the moon (m) = 7.4 x [tex]10^{22[/tex]kg
Distance between the moon and the Earth (r) = 3.8 x [tex]10^8[/tex] m
We need to determine the velocity (v) of the moon. The velocity of an object in circular motion can be calculated using the formula:
v = ωr
Where:
v is the velocity
ω is the angular velocity
r is the distance from the center of rotation
The angular velocity (ω) can be calculated using the formula:
ω = 2πf
Where:
ω is the angular velocity
π is the mathematical constant pi (approximately 3.14159)
f is the frequency of rotation
The frequency of rotation can be calculated using the formula:
f = 1 / T
Where:
f is the frequency
T is the period of rotation
The period of rotation (T) can be calculated using the formula:
T = 2π / v
Now, let's calculate the angular momentum (L):
v = ωr
= (2πf)r
= (2π * (1/T))r
= (2π * (1 / (2π / v)))r
= v * r
L = mvr
= (7.4 x [tex]10^{22[/tex] kg)(v)(3.8 x[tex]10^{8[/tex] m)
Now, let's calculate the angular momentum using the given values:
L = (7.4 x [tex]10^{22[/tex] kg)(3.8 x[tex]10^{8[/tex] m)
= 2.812 x [tex]10^{31[/tex] kg·m²/s
Therefore, the angular momentum of the moon around the Earth is approximately 2.812 x [tex]10^{31[/tex]kg·m²/s (to two significant figures).und the Earth can be determined using two significant figures.
Learn more about angular momentum here:
https://brainly.com/question/29897173
#SPJ11
Three resistors of 12.0, 18.0, and 14.3 2 are connected in series. A 10.0V battery is connected to the combination. What is the current flowing through the 12.0 S resistor? Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23, -2, 1e6, 5.23e-8
The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225
Given information: Three resistors of 12.0, 18.0, and 14.3 2 are connected in series. A 10.0V battery is connected to the combination.We can use Ohm's law to find the current flowing through the 12.0 Ω resistor. Ohm's law: V = IRwhereV is the potential difference (voltage)I is the current R is the resistance The current is the same for all the resistors because they are connected in series.
Electric charge flowing across a circuit is referred to as current. It measures how quickly electric charges, most often electrons, flow through a conductor. The letter "I" stands for current, which is denoted by the unit amperes (A). In a closed loop circuit, current travels through the conductor and back to the negative terminal of a power source, such as a battery. An electric potential difference, or voltage, across the circuit, is what drives the flow of current.
Therefore, we can use the total resistance and the total potential difference to find the current.I = V/RtwhereV is the potential differenceRt is the total resistanceTotal resistance:Rt = R₁ + R₂ + R₃whereR₁ = 12.0 ΩR₂ = 18.0 ΩR₃ = 14.3 ΩRt = 12.0 Ω + 18.0 Ω + 14.3 ΩRt = 44.3 Ω
Now, we can find the current using the total resistance and the potential difference.I = V/RtwhereV = 10.0 VI = 10.0 V/44.3 ΩI = 0.225 A
The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225
Learn more about current here:
https://brainly.com/question/31256947
#SPJ11
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long.
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long. So, The acceleration of the actual car is 1515.15 m/s².
The solution to this question can be achieved through the use of the equation: F = ma Where F is force, m is mass, and a is acceleration.
Step 1: Calculating the mass of the toy car using the ratio of lengths m1/m2 = l1/l2, where m1 and m2 are the masses of the toy car and actual car, and l1 and l2 are their respective lengths.
Rearranging, we have:m1 = (l1/l2)m2 = (0.12 m)/(6 m) m2 = 0.02 m2
Step 2: Using the equation, F = ma, we can determine the mass of the toy car: F = ma2 N = (0.02 m2) a a = 2 N / 0.02 m2 = 100 m/s²
Step 3: Using the same force of 5 N, the acceleration of the actual car can be calculated:F = ma5 N = ma m = m2/l2 m = 0.02 m2 / 6 m = 0.0033 kg a = F/m a = 5 N / 0.0033 kg = 1515.15 m/s²
Therefore, the acceleration of the actual car is 1515.15 m/s².
For more questions on acceleration
https://brainly.com/question/460763
#SPJ8
The probable question may be:
A toy car that is 0.12 m long is used to model the actions of an actual car that is 6 m long. The toy car is pushed with a force of 5 N, causing it to accelerate at a rate of 2 m/s². Assuming the same force is applied to the actual car, calculate the acceleration of the actual car.
Explain interesting processes (phenomena) related to chemical
equilibrium (including phase equilibrium) from the viewpoint of
thermodynamics. Please write the process as clear as possible
Thermodynamics is a branch of physics that deals with the relationships between different types of energy and how they affect matter. Chemical equilibrium is a phenomenon that occurs when the rates of the forward and backward reactions are equal, meaning that there is no net change in the concentrations of the reactants and products over time.
There are several interesting processes related to chemical equilibrium from the viewpoint of thermodynamics, including phase equilibrium.
One interesting process related to chemical equilibrium is Le Chatelier's principle. This principle states that if a system at equilibrium is subjected to a stress, the system will adjust in such a way as to partially offset the effect of the stress and restore the equilibrium. For example, if a system is at equilibrium between a solid and a gas, and the pressure is increased, the system will shift towards the side with fewer moles of gas to decrease the pressure.
Another interesting process related to chemical equilibrium is the common ion effect. This effect occurs when the addition of an ion that is already present in the system causes the equilibrium to shift in the opposite direction. For example, if an acid is dissolved in water and the pH is lowered, the addition of more acid will cause the equilibrium to shift towards the side with less acid, causing the pH to increase.
In conclusion, chemical equilibrium is an important phenomenon in thermodynamics, and there are several interesting processes related to it, including Le Chatelier's principle and the common ion effect. These processes help us understand how systems at equilibrium respond to changes in their environment, and they have many practical applications in fields such as chemistry and engineering.
To know more about equilibrium visit:
https://brainly.com/question/12977920
#SPJ11
Write the equation of the input-referred noise voltage of the two amplifiers (a) and (b) -VDD VinM₁ Vinº Me 1st (a) Rs M₂ VDO M₁ (b) Vout Vout
The input-referred noise voltage of amplifier (b) is given by:[tex]Enin = (4kT/RL) + [(2/3)*Kn*(M2*VDO - Vtn)^2/RL] + [(1/3)*Kn*(M1*VinM1 - Vtn)^3/RL][/tex](a)For the amplifier, the input-referred noise voltage equation is given by: [tex]Enin =(4kT/RL) + [(2/3)*Kn*(Vin - Vtn) ^2/RL] + [(1/3)*Kn*(Vin - Vtn)^3/RL].[/tex]
The noise voltage of the two amplifiers (a) and (b) is given below. (a)For the amplifier, the input-referred noise voltage equation is given by: [tex]Enin =(4kT/RL) + [(2/3)*Kn*(Vin - Vtn) ^2/RL] + [(1/3)*Kn*(Vin - Vtn)^3/RL].[/tex]Here,Kn is the transconductance parameter of the transistor, RL is the load resistor, andVin is the input voltage. Thus, the input-referred noise voltage of amplifier (a) is given by: [tex]Enin = (4kT/RL) + [(2/3)*Kn*(VinM1 - Vtn)^2/RL] + [(1/3)*Kn*(Vin0 - Vtn)^3/RL][/tex] (b)For the amplifier, the input-referred noise voltage equation is given by:[tex]Enin=(4kT/RL) + [(2/3)*Kn*(Vin - Vtn)^2/RL] + [(1/3)* Kn*(Vin - Vtn)^3/RL].[/tex]
Here, Kn is the transconductance parameter of the transistor, RL is the load resistor, and Vin is the input voltage. Thus, the input-referred noise voltage of amplifier (b) is given by:[tex]Enin = (4kT/RL) + [(2/3)*Kn*(M2*VDO - Vtn)^2/RL] + [(1/3)*Kn*(M1*VinM1 - Vtn)^3/RL][/tex]This is how we find the equation of the input-referred noise voltage of the two amplifiers (a) and (b).
To know more about amplifiers click here:
https://brainly.com/question/31462209
#SPJ11
This question is already complete
if the barometer shown is with pressure 101000 Pa, what would be the height of the mercury column if the density of mercury at the temperature is 13600 kg/m³? (g=9.806 m/s²)
The barometer is a device that is used to measure the atmospheric pressure. It works by balancing the weight of mercury in a tube against the atmospheric pressure, where the height of the mercury column indicates the atmospheric pressure.
1. The pressure (P) in the barometer = 101000 Pa. The density (ρ) of mercury at the given temperature = 13600 kg/m³The acceleration due to gravity (g) = 9.806 m/s².
2. Formula: Pressure (P) = density (ρ) × gravity (g) × height of the mercury column (h)The above equation can be rearranged to solve for the height of the mercury column: h = P/(ρg).
3. Substituting the given values in the formula: h = 101000/(13600 × 9.806) m/h = 0.735 m. Therefore, the height of the mercury column would be 0.735 m.
Learn more about barometer:
https://brainly.com/question/3083348
#SPJ11
A moving particle encounters an external electric field that decreases its kinetic energy from 9320 eV to 6600 eV as the particle moves from position A to position B. The electric potential at A is -65.0 V, and that at B is +15.0 V. Determine the charge of the particle. Include the algebraic sign (+ or -) with your answer.
A moving particle encounters an external electric field that decreases its kinetic energy from 9320 eV to 6600 eV as the particle moves from position A to position B. The electric potential at A is -65.0 V, and that at B is +15.0 V.
We need to determine the charge of the particle.
The work done on the charged particle as it moves from point A to point B is
W = q (Vb - Va)
As the charged particle moves from point A to point B, the potential difference is,
Vb - Va = (+15 V) - (-65 V) = 80 V
Work done on the charged particle, W is,
W = q (Vb - Va) = (1.6 × 10^-19 C) × (80 V) = 1.28 × 10^-17 J
Kinetic energy of the charged particle at position A is,
KEA = 9320 eV = 1.495 × 10^-15 J
And the kinetic energy of the charged particle at position B is,
KEB = 6600 eV = 1.061 × 10^-15 J
The loss of kinetic energy of the charged particle from position A to position B is
W = KEA - KEB1.28 × 10^-17 J = (1.495 × 10^-15 J) - (1.061 × 10^-15 J)1.28 × 10^-17 J = 0.434 × 10^-15 J
Therefore, charge of the particle is,
q = W / (Vb - Va) = 1.28 × 10^-17 C / 80 V = 1.6 × 10^-19 C
As work done on the charged particle is negative, the algebraic sign of charge is also negative. Therefore, the charge of the particle is -1.6 × 10^-19 C.
Learn more about electric field here: https://brainly.com/question/19878202
#SPJ11
A 82.76 microC charge is fixed at the origin. How much work would be required to place a 14.48 microC charge 5.97 cm from this charge ?
A 82.76 microC charge is fixed at the origin. the work required to place the 14.48 microC charge 5.97 cm from the fixed charge is approximately [tex]2.14 * 10^{-6}[/tex] Joules.
To calculate the work required to place a charge at a certain distance from another fixed charge, we can use the formula for electric potential energy.
The formula for electric potential energy (U) between two point charges is given by:
U = (k * q1 * q2) / r
Where U is the potential energy, k is the electrostatic constant (9 x 10^9 Nm²/C²), q1 and q2 are the magnitudes of the charges, and r is the distance between the charges.
In this case, the charge fixed at the origin is 82.76 microC and the charge being placed is 14.48 microC. The distance between them is 5.97 cm.
Converting microC to C and cm to meters:
q1 = 82.76 x 10^(-6) C
q2 = 14.48 x 10^(-6) C
r = 5.97 x 10^(-2) m
Plugging in the values into the formula:
U = ([tex]9 * 10^9[/tex] Nm²/C²) * ([tex]82.76 * 10^(-6)[/tex] C) * ([tex]14.48 * 10^{-6} C)[/tex] / ([tex]5.97 * 10^{2}[/tex]m)
Simplifying the equation:
U ≈ [tex]2.14 * 10^{-6}[/tex] J
Therefore, the work required to place the 14.48 microC charge 5.97 cm from the fixed charge is approximately [tex]2.14 * 10^{-6}[/tex] Joules.
Learn more aboutfor electric potential energy here:
https://brainly.com/question/28444459
#SPJ11
A radio station transmits isotropically (that is, in all directions) electromagnetic radiation at a frequency of 94.6 MHz. At a certain distance from the radio station, the intensity of the wave is I=0.355
wm?
a) What will be the intensity of the wave three times the distance from the radio station?
b) What is the wavelength of the transmitted signal?If the power of the antenna is 8 MW.
c) At what distance from the source will the intensity of the wave be 0.177 W/m2?
d) and what will be the absorption pressure exerted by the wave at that distance?
e) and what will be the effective electric field (rms) exerted by the wave at that distance?
The intensity of an electromagnetic wave transmitted by a radio station at a certain distance is given. By using the inverse square law. a) [tex]I=0.0394 W/m^2[/tex] b)wavelength = 3.17 meters c) r = 3786 m d)absorption pressure = [tex]5.9*10^-^1^0 N/m^2 e[/tex]) electric field = [tex]5.57*10^-^4[/tex] V/m
a) For finding the intensity three times the distance from the radio station, the inverse square law is used. Since the intensity decreases with the square of the distance, the new intensity will be [tex](1/3)^2[/tex] times the original intensity. Thus, the intensity will be (1/9) times the original intensity, which is
[tex]I=0.355/9=0.0394 W/m^2[/tex].
b) The wavelength of the transmitted signal can be calculated using the formula:
wavelength = speed of light/frequency
Given that the frequency is[tex]94.6 MHz (94.6*10^6 Hz)[/tex], and the speed of light is approximately [tex]3*10^8[/tex] m/s,
substitute these values into the formula to find the wavelength: wavelength = [tex](3*10^8 m/s) / (94.6*10^6Hz) = 3.17 meters[/tex].
c) Rearranging the formula for intensity,
I = power / [tex](4\pi r^2)[/tex], solve for the distance (r) where the intensity is 0.177 W/m².
Substituting the given intensity and power [tex](8 MW = 8*10^6 W)[/tex],
[tex]0.177 = (8*10^6 W) / (4\pi r^2)[/tex]
Solving for r:
r = [tex]\sqrt[/tex][tex][(8*10^6 W) / (4\pi *0.177 W/m^2)] \approx 3786 meters[/tex].
d) The absorption pressure exerted by the wave at that distance can be calculated using the formula:
absorption pressure = intensity/speed of light.
Substituting the given intensity and the speed of light,
absorption pressure = [tex]0.177 W/m^2 / (3*10^8 m/s) \approx 5.9*10^-^1^0 N/m^2[/tex].
e) The effective electric field (rms) exerted by the wave at that distance can be calculated using the formula:
effective electric field = [tex]\sqrt[/tex](2 × intensity/permeability of free space × speed of light).
Substituting the given intensity, the permeability of free space ([tex]\mu_0 = 4\pi*10^-^7 T.m/A[/tex]), and the speed of light,
effective electric field = [tex]\sqrt(2 * 0.177 W/m^2 / (4\pi*10^-^7 T.m/A * 3*10^8 m/s)) \approx 5.57*10^-^4 V/m[/tex].
Learn more about electromagnetic wave here:
https://brainly.com/question/29774932
#SPJ11
A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a m 1
=1.8−kg object at the origin of the coordinate system, a m 2
=3.3−kg object at (0,2.0), and a m 3
=5.1−kg object at (4.0,0). Find the resultant gravitational forcee exerted by the other two objects on the object at the origin. magnitude direction Need Help?
To find the resultant gravitational force exerted by the other two objects on the object at the origin of the coordinate system, we need to calculate the individual gravitational forces between each pair of objects and then find the vector sum of these forces.
The gravitational force between two objects can be calculated using the formula F = G * (m1 * m2) / r^2, where F is the gravitational force, G is the gravitational constant, m1, and m2 are the masses of the two objects, and r is the distance between them.
In this case, we have three objects: m1 = 1.8 kg at the origin, m2 = 3.3 kg at (0,2.0), and m3 = 5.1 kg at (4.0,0). To find the resultant gravitational force on m1, we need to calculate the gravitational forces between m1 and m2, and between m1 and m3, and then find the vector sum of these forces.
Using the formula mentioned above, we can calculate the magnitude and direction of each gravitational force. To find the resultant force, we add the vector components of the forces and determine the magnitude and direction of the resultant force.
Learn more about gravitational forces here:
https://brainly.com/question/32609171
#SPJ11
An object is placed 23.3 cm to the left of a diverging lens (f = -8.39 cm). A concave mirror (f = 10.2 cm) is placed 23.9 cm to the right of the lens. find the final image distance, measured relative to the mirror.
An object is placed 23.3 cm to the left of a diverging lens (f = -8.39 cm). the final image distance, measured relative to the mirror, is approximately 13.158 cm.
To find the final image distance relative to the mirror, we need to consider the combined effect of the diverging lens and the concave mirror.
Given:
Object distance from the lens, p1 = -23.3 cm (negative sign indicates it is to the left of the lens)
Focal length of the diverging lens, f1 = -8.39 cm (negative sign indicates a diverging lens)
Distance between the lens and the mirror, d = 23.9 cm
Focal length of the concave mirror, f2 = 10.2 cm
We can use the mirror and lens equation to calculate the intermediate image distance relative to the lens, q1:
1/f2 = 1/q1 - 1/d
Substituting the values:
1/10.2 = 1/q1 - 1/23.9
Simplifying the equation:
1/q1 = 1/10.2 + 1/23.9
Now, we need to find the final image distance relative to the mirror, q2. Since the image formed by the lens acts as the object for the mirror, the object distance for the mirror is q1.
Using the mirror equation:
1/f1 = 1/q2 - 1/q1
Substituting the values:
1/-8.39 = 1/q2 - 1/q1
Substituting the value of q1:
1/-8.39 = 1/q2 - 1/(1/10.2 + 1/23.9)
Simplifying the equation:
1/q2 = 1/-8.39 + 1/(1/10.2 + 1/23.9)
Calculating the reciprocal of the right-hand side:
1/q2 = 1/-8.39 + 1/(1/10.2 + 1/23.9)
Simplifying the equation:
1/q2 ≈ 0.119 - 0.043
1/q2 ≈ 0.076
Taking the reciprocal of both sides:
q2 ≈ 13.158 cm
Therefore, the final image distance, measured relative to the mirror, is approximately 13.158 cm.
Learn more about diverging lens here:
https://brainly.com/question/28348284
#SPJ11
Object 1 (of mass m1 = 5 kg) is moving with velocity v, = +4 m/s directly toward Object 2 (of mass m2 = 2 kg), which is moving with velocity v2 =–3 m/s directly toward Object 1. The objects collide and stick together after the collision. True or False? The objects’ kinetic energy after the collision is equal to their total kinetic energy before the collision. True False
The statement that the objects' kinetic energy after the collision is equal to their total kinetic energy before the collision is false in this case.
In a collision between two objects, the total kinetic energy of the system is not always conserved. This is particularly true in inelastic collisions, where the objects stick together after the collision. In an inelastic collision, there is a transfer of kinetic energy to other forms such as deformation energy, sound, or heat. As a result, the total kinetic energy of the system decreases.
In the given scenario, Object 1 and Object 2 are moving towards each other with different velocities. When they collide, they stick together and move as a combined object. Due to the sticking together, there is a transfer of kinetic energy between the objects.
Before the collision, Object 1 has a kinetic energy of (1/2)mv1^2, and Object 2 has a kinetic energy of (1/2)m2v2^2, where m1 and m2 are the masses of the objects, and v1 and v2 are their respective velocities. The total kinetic energy before the collision is the sum of these individual kinetic energies.
After the collision, when the objects stick together, they move with a common velocity. The combined object now has a mass of (m1 + m2). The kinetic energy of the combined object is (1/2)(m1 + m2)v^2, where v is the common velocity after the collision.
Since the objects stick together, the magnitude of the common velocity is generally less than the relative velocities of the individual objects before the collision. As a result, (1/2)(m1 + m2)v^2 is generally less than (1/2)m1v1^2 + (1/2)m2v2^2. Therefore, the total kinetic energy after the collision is less than the total kinetic energy before the collision.
Hence, the statement that the objects' kinetic energy after the collision is equal to their total kinetic energy before the collision is false in this case.
Learn more about kinetic energy
https://brainly.com/question/13876829
#SPJ11
A helium-filled balloon escapes a child's hand at sea level and 22.1°C. When it reaches an altitude of 3600 m, where the temperature is 4.6°C and the pressure is only 0.72 atm, how will its volume compare to that at sea level? Express your answer using two significant figures.
The volume of the helium-filled balloon at an altitude of 3600 m is approximately 1.41 times the volume at sea level.
To determine how the volume of the helium-filled balloon at an altitude of 3600 m compares to its volume at sea level, we can use the ideal gas law. The ideal gas law states:
PV = nRT
where:
P is the pressure,
V is the volume,
n is the number of moles of gas,
R is the ideal gas constant, and
T is the temperature in Kelvin.
To compare the volumes, we can write the ideal gas law equation for the balloon at sea level (subscript "1") and at an altitude of 3600 m (subscript "2"):
P₁V₁ = n₁RT₁
P₂V₂ = n₂RT₂
The number of moles and the gas constant are the same for both equations, so we can equate them:
P₁V₁/T₁ = P₂V₂/T₂
We want to compare the volumes, so we can rearrange the equation as:
V₂/V₁ = (P₁/P₂) * (T₂/T₁)
Given:
P₁ = 1 atm
T₁ = 22.1°C = 22.1 + 273.15 = 295.25 K
P₂ = 0.72 atm
T₂ = 4.6°C = 4.6 + 273.15 = 277.75 K
Substituting these values into the equation, we can solve for V₂/V₁:
V₂/V₁ = (1 atm / 0.72 atm) * (277.75 K / 295.25 K)
Calculating the right-hand side of the equation, we find:
V₂/V₁ ≈ 1.41
To know more about helium-filled balloon
https://brainly.com/question/31859232
#SPJ11
What focal length (in meters) would you use if you intend to focus a 1.06 mm diameter laser beam to a 10.0μm diameter spot 20.0 cm behind the lens? (Type in three significant digits).
To focus a 1.06 mm diameter laser beam to a 10.0 μm diameter spot 20.0 cm behind the lens, a focal length of approximately 7.44 meters would be required.
The relationship between the diameter of the beam, the diameter of the spot, the focal length, and the distance behind the lens can be determined using the formula for Gaussian beam optics. According to this formula, the spot size (S) is given by [tex]S = \frac{\lambda*f}{\pi* w}[/tex] where λ is the wavelength, f is the focal length, and w is the beam waist radius.
In this case, the beam diameter is given as 1.06 mm, which corresponds to a beam waist radius of half that value, i.e., 0.53 mm or 5.3 x [tex]10^{-4}[/tex] meters. The spot diameter is given as 10.0 μm, which is equivalent to a beam waist radius of 5 x [tex]10^{-6}[/tex] meters. The distance behind the lens is 20.0 cm, which is 0.2 meters.
Using the formula, we can rearrange it to solve for the focal length: [tex]f = \frac{S*\pi* w}{\lambda}[/tex]. Substituting the given values, we have f = (10.0 x [tex]10^{-6}[/tex]) * π * (5.3 x [tex]10^{-4}[/tex]) / (1.06 x [tex]10^{-3}[/tex]) = 7.44 meters (rounded to three significant digits). Therefore, a focal length of approximately 7.44 meters would be needed to achieve the desired focusing of the laser beam.
Learn more about laser here:
https://brainly.com/question/27853311
#SPJ11
An idealized (R=0) LC circuit has an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series. What is the LC circuit's period of oscillations? A. 466 s B. 0.047 s C. 4.66 s D. 0.466 s
The LC circuit's period of oscillations is option D is correct.
An idealized LC circuit has an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series. To find the LC circuit's period of oscillations, we will use the formula below:T = 2π√(LC)Where;L = InductanceC = Capacitance.The inductance L = 25 HCapacitance C = 220μF = 220 x 10⁻⁶ F.
Now we can substitute the value of L and C in the above formula:T = 2π√(LC)T = 2π√(25 x 220 x 10⁻⁶)T = 2π√(5.5 x 10⁻³)T = 2π x 0.074T = 0.466s.
Therefore, the period of oscillations in an idealized LC circuit with an inductor of inductance 25.0H and a capacitor of capacitance 220μF connected in series is 0.466s. Hence, option D is correct.
Learn more about oscillations here,
https://brainly.com/question/12622728
#SPJ11
For an LRC circuit, resonance occurs when the impedence of the circuit is purely do to the resistance of the resistor only. True False
In an LRC circuit, resonance occurs when the impedance of the circuit is purely due to the combination of the inductance (L) and capacitance (C), not just the resistance (R) of the resistor. Hence, the given statement is false.
Resonance in an LRC (inductor-resistor-capacitor) circuit occurs when the frequency of the input signal matches the natural frequency of the circuit, resulting in maximum current and minimum impedance. At resonance, the reactive components (inductive and capacitive) cancel each other out, leaving only the resistance in the circuit. However, this does not mean that the impedance is purely due to the resistance of the resistor only.
The impedance of an LRC circuit is given by [tex]Z = \sqrt{(\text{R}^2) + (\text{X}_{L}- X_{C})^2[/tex] where Z represents impedance, R represents resistance, [tex]\text{X}_{\text{L}[/tex] represents inductive reactance, and [tex]\text{X}_{\text{C}[/tex] represents capacitive reactance. At resonance, [tex]\text{X}_{\text{L }} =\ \text{X}_{\text{C}}[/tex], which results in the minimum impedance, but the impedance is still determined by both the resistance and the reactances.
Therefore, in an LRC circuit, resonance occurs when the impedance is minimum and the reactive components cancel each other, but the impedance is not purely due to the resistance of the resistor alone.
Learn more about impedance here:
https://brainly.com/question/30475674
#SPJ11