Photochemical oxidants are examples of secondary pollutants.
Photochemical oxidants are secondary pollutants as they are formed in the atmosphere due to the combination of primary pollutants, such as nitrogen oxides and volatile organic compounds, with sunlight. These oxidants can cause smog, respiratory problems, and other environmental issues.
The other options mentioned in the question are: Aerosols, volatile organic compounds, combustion gases, and dust from soil erosion are examples of primary pollutants.Aerosols are solid or liquid particles that are suspended in the air. They can come from natural sources like dust or volcanic ash, or human-made sources like industrial emissions.
Volatile organic compounds (VOCs) are organic chemicals that easily evaporate into the air. They are emitted by many sources such as motor vehicles, industrial processes, and household products.Combustion gases are produced by the burning of fossil fuels or biomass. They can contribute to smog and other environmental problems.Dust from soil erosion is also a primary pollutant, which can cause respiratory problems and contribute to air pollution.
For more such questions on Secondary Pollutants
https://brainly.com/question/29194528
#SPJ11
How many atoms there be in 1.432 x 10^6 g of Fluoride?
1.432 x 10^6 g of Fluoride contains 2.90 x 10^25 atoms.
Atoms are the smallest units of matter and are composed of protons, neutrons, and electrons.Every element is made up of atoms, and its chemical and physical properties are determined by the number and arrangement of these atoms. The mass of an atom is usually measured in atomic mass units (amu). One atomic mass unit is equal to 1.66 x 10^-24 grams.
In order to determine the number of atoms in a given mass, we must first convert the mass to atomic mass units. We can then use Avogadro's number, which is 6.022 x 10^23 particles per mole, to calculate the number of atoms.
In this case, 1.432 x 10^6 grams of Fluoride would convert to 8.668 x 10^23 atomic mass units. Using Avogadro's number, we can calculate that this mass of Fluoride contains 2.90 x 10^25 atoms.
Learn more about atoms here:
https://brainly.com/question/17545314
#SPJ1
how many valence electrons does each atom in an nh3 molecule contribute to the total valence electrons? a) n contributes 3, and each h contributes 1. b) n contributes 5, and each h contributes 1. c) n contributes 5, and each h contributes 3. d) n contributes 7, and each h contributes 1
In ammonia, the nitrogen shares 3 of its valence electrons with each hydrogen atom and each of the hydrogen atom shares one valence electron. So option a is right.
Nitrogen has 5 electrons in its outer shell and hydrogen has one electron. All atoms try to complete octet electronic configuration to become stable. So covalent compound forms covalent bonds by sharing the electrons. Here one nitrogen forms covalent bonds with three hydrogen atoms by sharing one electron with each.
As there is 5 electrons in the outer shell, two of them remains as lone pair of electrons. Here since only one pair of electrons are shared between atoms, they form single bond with each other.
So nitrogen shares 3 electrons and each hydrogen contributes one.
For more information regarding covalent bonds, kindly refer
https://brainly.com/question/19382448
#SPJ4
what visual evidence, other than melting range, do you have that the starting materials have undergone a transformation?
Changes in color, texture, and appearance can also serve as visual evidence of a chemical transformation in addition to the melting range.
In addition to the melting range, other visual evidence that the starting materials have undergone a transformation may include changes in color, texture, or appearance. For example, if the starting materials were colorless liquids and the product is a solid with a distinct color, this could indicate that a chemical reaction has occurred.
Similarly, if the starting materials were clear and the product is cloudy or has a different texture, this could also suggest that a reaction has taken place. Other forms of evidence could include changes in mass, boiling point, or refractive index, among others. Ultimately, a combination of analytical techniques, such as spectroscopy or chromatography, may be required to confirm the identity and purity of the product.
To know more about range, here
brainly.com/question/30776651
#SPJ4
carbon 14 has a half life of 5700 years. in how many years will a wooden desk made of fresh lumber have 75% of its original carbon 14 remaining?
It will take approximately 2368 years for a wooden desk made of fresh lumber to have 75% of its original Carbon-14 remaining.
To determine how many years it will take for a wooden desk to have 75% of its original Carbon-14 remaining, we'll use the half-life formula:
Final amount = Initial amount * (1/2)^(time elapsed / half-life)
Let's plug in the values:
- Final amount: 75% of the original Carbon-14 (0.75 * Initial amount)
- Initial amount: 100% of the original Carbon-14
- Half-life: 5700 years
0.75 * Initial amount = Initial amount * (1/2)^(time elapsed / 5700)
Now we can divide both sides by the Initial amount:
0.75 = (1/2)^(time elapsed / 5700)
To solve for the time elapsed, we can take the logarithm of both sides:
log(0.75) = log((1/2)^(time elapsed / 5700))
Now we can use the property of logarithms log(a^b) = b*log(a):
log(0.75) = (time elapsed / 5700) * log(1/2)
Now we can solve for the time elapsed by dividing both sides by log(1/2):
time elapsed = (log(0.75) / log(1/2)) * 5700
Using a calculator, we get:
time elapsed ≈ 2368 years
to know more about the half-life of C-14 refer here:
https://brainly.com/question/24710827#
#SPJ11
What happened during the chemical reaction that caused the sulfur and hydrogen chloride to form?
During the chemical reaction between sulfur and hydrogen chloride, the two substances combine to form a new compound known as sulfur dichloride, which has a chemical formula of SCl₂.
The chemical reaction between sulfur (S) and hydrogen chloride (HCl) results in the formation of hydrogen sulfide (H₂S) and sulfur dioxide (SO₂). The reaction can be represented by the following equation:
S (s) + 2 HCl (g) → H₂S (g) + SO₂ (g)
In this reaction, the sulfur atoms combine with the hydrogen and chlorine atoms from HCl to form H₂S and SO₂. The reaction is exothermic, which means that it releases heat as it proceeds. The reaction also involves the transfer of electrons between the atoms, leading to the formation of new chemical bonds between the atoms. Overall, the chemical reaction between sulfur and hydrogen chloride is a redox reaction, where the oxidation state of sulfur changes from 0 to +4 in SO₂, and the oxidation state of hydrogen changes from +1 to -1 in H₂S.
Learn more about compound here:
https://brainly.com/question/13516179
#SPJ1
The rate of a chemical reaction is given by R = k[A]²[B]. What is the overall order of the reaction?
A) 0
B) 1
C) 2
D) 3
Answer:
2 is the rate of chemistry reaction
which of the following is a poor functional group for promoting covalent catalysis? a. the imidazole group of his b. the hydroxyl group of ser c. the sulfhydryl group of cys d. the hydroxyl group of tyr e. the amino group of lys
Imidazole group of Histidine is called as a poor functional group for promoting covalent catalysis because it doesn't participate in any reaction where a covalent modification on it occurs. Option (a) is correct.
Imidazole group is defined as an organic compound that has the formula C₃N₂H₄. It is called as a white or colorless solid which has the tendency to soluble in water producing a mildly alkaline solution. Imidazole group called as an aromatic heterocycle group that is classified as a diazole which has the nitrogen atoms in meta-substitution. Histidine is defined as an essential amino acid which has a positively charged imidazole functional group. The imidazole group makes the histidine a common participant in enzyme catalyzed reactions. The unprotonated imidazole group is generally serve as a common base of the reaction and the protonated form can serve as a common acid of the reaction.
To learn more about Histidine
https://brainly.com/question/28536846
#SPJ4
two components a and b are given in a mixture which can be subjected to tlc. in an effort to select the most favorable eluent several trials including different hexanes/ethyl acetate systems were used. which is the best solvent system to elute compound a? compound b?
To select the most favorable eluent, which is the best solvent system to elute compound A and B TLC (Thin layer chromatography) separation technique is used.
It is used to isolate and identify substances from mixtures. It works on the same principle as column chromatography, but it is carried out on a smaller scale. TLC is a simple and quick technique for separating components from a mixture. It is based on the differential adsorption of components onto the adsorbent surface.The most favorable solvent system to elute compound A and B is given as follows;Hexane/ethyl acetate mixture is used to elute the compound A from the mixture, and a solvent system consisting of a higher amount of ethyl acetate and lower amount of hexanes is used to elute compound B.Both components, A and B, have different polarities, and hence, their solubilities are different in various solvents.
The chromatographic separation occurs when one component has higher polarity and adsorbs more readily to the polar adsorbent than another compound with lower polarity. Thus, the ideal solvent system is dependent on the properties of the components that you are separating.
For more such questions on Chromatography
https://brainly.com/question/27207149
#SPJ11
plsss helppp asapppp
Answer:
well u can see clearly that C got the most bonds
what is the relationship between ph and the hydroxide ion concentration? as the ph increases, the hydroxide ion concentration
The relationship between pH and the hydroxide ion (OH-) concentration can be described by the pH scale, which is a measure of the acidity or basicity of a solution.
The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral (indicating the presence of equal concentrations of H+ and OH- ions), pH values below 7 indicate acidity (indicating the presence of higher concentrations of H+ ions than OH- ions), and pH values above 7 indicate basicity (indicating the presence of higher concentrations of OH- ions than H+ ions).
Mathematically, the relationship between pH and the hydroxide ion concentration can be expressed as:
pH = -log [OH-]
where [OH-] represents the concentration of hydroxide ions in moles per liter (M).
So, as the pH increases (i.e. becomes more basic), the hydroxide ion concentration also increases, and as the pH decreases (i.e. becomes more acidic), the hydroxide ion concentration decreases.
To know more about ion click here
brainly.com/question/14982375
#SPJ4
what is the kinetic/thermal energy of one mole of co2 molecules at 37 oc?
The kinetic/thermal energy of one mole of CO2 molecules at 37°C is 99.0 kJ.
What is thermal energy?Thermal energy is the energy that comes from the temperature of an object or its surroundings. It is a form of energy that is released by a substance as a result of its temperature increasing. Thermal energy is the sum of the kinetic and potential energy of the particles that make up a substance.
What is kinetic energy?Kinetic energy is the energy possessed by an object as a result of its motion. It is calculated using the formula KE = 1/2mv2, where m is the mass of the object and v is its velocity. The kinetic energy of an object increases as its velocity or mass increases.
How to calculate the thermal energy of CO2 at 37°C?The thermal energy of one mole of CO2 molecules at 37°C can be calculated using the formula: E = nRT, where E is the thermal energy, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
The gas constant R is equal to 8.314 J/mol K.
Converting 37°C to Kelvin, we get: T = 37 + 273 = 310 K
Substituting the values into the formula, we get:E = nRT= (1 mol)(8.314 J/mol K)(310 K)= 2574.94 J/mol
Converting J/mol to kJ/mol, we get:2574.94 J/mol / 1000 = 2.57 kJ/mol
Therefore, the thermal energy of one mole of CO2 molecules at 37°C is 2.57 kJ/mol.
The kinetic energy of one mole of CO2 molecules at 37°C can be calculated using the formula KE = 3/2nRT, where n, R, and T have the same values as before.
Substituting the values into the formula, we get:KE = 3/2nRT= (3/2)(1 mol)(8.314 J/mol K)(310 K)= 3860.41 J/mol
Converting J/mol to kJ/mol, we get:3860.41 J/mol / 1000 = 3.86 kJ/molTherefore, the kinetic energy of one mole of CO2 molecules at 37°C is 3.86 kJ/mol.
To know more about thermal energy refer to-
brainly.com/question/18989562#
#SPJ11
how many milliliters of 1.02 m hclo4 should be added to 1.90 g of imidazole to give a ph of 6.993?
We need to add 27.3 mL of 1.02 M [tex]HClO_4[/tex] to 1.90 g of imidazole to give a pH of 6.993.
To solve this problem, we need to use the Henderson-Hasselbalch equation:
[tex]pH = pK_a + log(\frac{[A^-]}{[HA]})[/tex]
where pH is the desired pH, pKa is the acid dissociation constant of the acid (in this case, [tex]HClO_4[/tex]), [A-] is the concentration of the conjugate base (in this case, [tex]{ClO_4}^{-}[/tex]), and [HA] is the concentration of the acid (in this case, [tex]HClO_4[/tex]).
We can rearrange the equation to solve for the ratio of [tex][A^-][/tex] to [tex][HA][/tex]:
[tex]\frac{[A^-]}{[HA]} = 10^{(pH - pKa)}[/tex]
We can also use the molecular weight of imidazole to calculate the number of moles of imidazole:
n(imidazole) [tex]= \frac{m}{M}[/tex]
where m is the mass of imidazole and M is its molecular weight.
Once we know the number of moles of imidazole, we can use stoichiometry to calculate the number of moles of [tex]HClO_4[/tex] required to react with all of the imidazole. Since the reaction between [tex]HClO_4[/tex] and imidazole is a 1:1 reaction, the number of moles of [tex]HClO_4[/tex] required is equal to the number of moles of imidazole.
Finally, we can use the molarity of the [tex]HClO_4[/tex] solution to calculate the volume of [tex]HClO_4[/tex] required to supply the required number of moles of [tex]HClO_4[/tex].
Here are the calculations:
Molecular weight of imidazole = 68.08 g/mol
n(imidazole) [tex]= \frac{1.90}{68.08} = 0.0279[/tex] mol
[tex]pK_a[/tex] of [tex]HClO_4[/tex] = -8.0
[tex]\frac{[A^-]}{[HA]} = 10^{(pH - pK_a)} = 10^{(6.993 - (-8.0))} = 1.14 * 10^{14}[/tex]
Since the reaction is a 1:1 reaction, we need 0.0279 mol of [tex]HClO_4[/tex].
Molarity of[tex]HClO_4[/tex] = 1.02 mol/L
Volume of [tex]HClO_4[/tex] = moles / molarity [tex]= \frac{0.0279}{1.02} = 0.0273[/tex] L
Finally, we convert the volume to milliliters:
Volume in mL [tex]= 0.0273*1000 = 27.3[/tex] mL
Therefore, we need to add 27.3 mL of 1.02 M [tex]HClO_4[/tex] to 1.90 g of imidazole to give a pH of 6.993.
learn more about Henderson-Hasselbalch equation here:
brainly.com/question/13651361
#SPJ4
. the calcium supplements taken by many women are composed primarily of powdered calcium car-bonate, caco3, which is also the primary component of marble. a. briefly explain why caco3 would be a good source for a woman suffering from chronic heart-burn. use a net ionic equation. b. marble statues erode when exposed to acidic precipitation. give a brief chemical explanation for this erosion. c. briefly explain why many people prefer antacids in which mg(oh)2 is the active ingredient over those that use caco3.
a. CaCO₃ effectively neutralizes excess stomach acid via the reaction: CaCO₃ + 2H⁺ → Ca²⁺ + H₂O + CO₂(g), making it a suitable source for chronic heartburn sufferers.
b. Marble statues erode from acidic precipitation due to a reaction between CaCO₃ and acid: CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂(g).
c. Mg(OH)₂ antacids are preferred over CaCO₃ antacids due to better neutralization of stomach acid and faster relief of heartburn symptoms from higher solubility.
Calcium carbonate (CaCO₃) can neutralize excess stomach acid and thus provide relief from heartburn symptoms. When calcium carbonate reacts with stomach acid (hydrochloric acid, HCl), it forms calcium chloride (CaCl₂), carbon dioxide (CO₂), and water (H₂O). The net ionic equation for the reaction is:
CaCO₃(s) + 2H⁺(aq) → Ca²⁺(aq) + CO₂(g) + H₂O(l)
The calcium ions can also be absorbed into the bloodstream and contribute to overall calcium intake.
Marble is composed mainly of calcium carbonate (CaCO₃). When exposed to acidic precipitation (such as acid rain), the carbonic acid (H₂CO₃) formed in the reaction between carbon dioxide (CO₂) and water (H₂O) reacts with calcium carbonate, producing calcium ions (Ca²⁺), bicarbonate ions (HCO₃⁻), and water. The bicarbonate ions are then washed away by the rainwater, leaving behind calcium-deficient marble that is more prone to erosion. The chemical reaction can be represented as, CaCO₃(s) + H₂CO₃(aq) → Ca²⁺(aq) + 2HCO₃⁻(aq)
Many people prefer antacids in which magnesium hydroxide (Mg(OH)₂) is the active ingredient over those that use calcium carbonate (CaCO₃) because Mg(OH)₂ has a higher solubility and is more readily absorbed by the body, which means it can neutralize stomach acid more effectively. Additionally, Mg(OH)₂ has a mild laxative effect, which can help relieve constipation, a common side effect of taking calcium carbonate antacids.
To know more about antacids, here
brainly.com/question/29440951
#SPJ4
How many atoms are in H2C6H6O6?
Answer:
14 atoms
Explanation:
To determine the number of atoms in H2C6H6O6, we need to count the total number of each type of atom in the molecule and then add them up. The subscript following each atom in the chemical formula represents the number of atoms of that element in the molecule. So, in H2C6H6O6, there are:
2 atoms of hydrogen (H) 6 atoms of carbon (C) 6 atoms of oxygen (O)
To calculate the total number of atoms, we simply add up these values:
2 + 6 + 6 = 14
Therefore, H2C6H6O6 contains a total of 14 atoms.
how many ions of each type are present in the following aqueous solution? 3.8 ml of 1.88 m magnesium chloride a. 4.30 x 1021 magnesium ions and 4.30 x 1021 chloride ions b. 4.30 x 1021 chloride ions and 8.60 x 1021 magnesium ions c. 4.30 x 1021 magnesium ions and 8.60 x 1021 chloride ions d. 4.30 x 1024 magnesium ions and 8.60 x 1024 chloride ions e. 2.98 x 1026 magnesium ions and 5.96 x 1026 chloride ions
The answer to the number of ions present in the aqueous solution is option (c) 4.30 x 10^21 magnesium ions and 8.60 x 10^21 chloride ions.
The number of ions in the aqueous solution can be calculated using the following formula:
Number of moles = molarity x volume of solution (in liters)
Number of ions = Avogadro's number x number of moles of substance
Since magnesium chloride dissociates into two ions (Mg2+ and 2Cl-), the number of ions can be doubled to calculate the number of chloride ions.The number of moles of magnesium chloride can be calculated as follows:
Number of moles = Molarity x Volume (in liters)
Number of moles = 1.88 M x 3.8 x 10^-6 L = 7.184 x 10^-6 mol
The total number of ions in the solution is:
Number of ions = 2 x Avogadro's number x number of moles of substance
Number of ions = 2 x 6.022 x 10^23 x 7.184 x 10^-6
Number of ions = 8.60 x 10^21 ions
The number of magnesium ions can be calculated by dividing the total number of ions by 2.Number of Mg2+ ions = 8.60 x 10^21 ions ÷ 2 = 4.30 x 10^21 ions
Therefore, the correct answer is option (c) 4.30 x 10^21 magnesium ions and 8.60 x 10^21 chloride ions.
More on ions: https://brainly.com/question/1698012
#SPJ11
b. How much energy is required to heat 2 kg of water through the following changes? Use values from latent heat and specific heat constant tables when necessary. Show your work. (10 points)
i. Heat 2 kg ice from –5°C to 0°C (2 points)
ii. Melt 2 kg ice at 0°C (2 points)
iii. Heat 2 kg water from 0°C to 100°C (2 points)
iv. Vaporize 2 kg water at 100°C (2 points)
v. Heat 2 kg steam from 100°C to 115°C (2 points)
In this task, we calculated the amount of energy required to perform various temperature-related changes to 2 kg of water, such as heating ice, melting ice, heating water, vaporizing water, and heating steam.
These calculations required us to use specific heat capacity and latent heat values for water.
i. To heat 2 kg of ice from -5°C to 0°C, we need to add energy to raise its temperature to the melting point of ice, while keeping it in the solid phase. The specific heat capacity of ice is 2.1 J/(g°C). So, for 2 kg of ice, the total energy required would be:
Energy = mass x specific heat capacity x change in temperature
Energy = 2,000 g x 2.1 J/(g°C) x (0°C - (-5°C))
Energy = 21,000 J
ii. To melt 2 kg of ice at 0°C, we need to add energy to overcome the latent heat of fusion, which is 334 J/g for water. So, for 2 kg of ice, the total energy required would be:
Energy = mass x latent heat of fusion
Energy = 2,000 g x 334 J/g
Energy = 668,000 J
iii. To heat 2 kg of water from 0°C to 100°C, we need to add energy to raise its temperature to the boiling point of water, while keeping it in the liquid phase. The specific heat capacity of water is 4.18 J/(g°C). So, for 2 kg of water, the total energy required would be:
Energy = mass x specific heat capacity x change in temperature
Energy = 2,000 g x 4.18 J/(g°C) x (100°C - 0°C)
Energy = 836,000 J
iv. To vaporize 2 kg of water at 100°C, we need to add energy to overcome the latent heat of vaporization, which is 2,260 J/g for water. So, for 2 kg of water, the total energy required would be:
Energy = mass x latent heat of vaporization
Energy = 2,000 g x 2,260 J/g
Energy = 4,520,000 J
v. To heat 2 kg of steam from 100°C to 115°C, we need to add energy to raise its temperature while keeping it in the gaseous phase. The specific heat capacity of steam is 1.84 J/(g°C). So, for 2 kg of steam, the total energy required would be:
Energy = mass x specific heat capacity x change in temperature
Energy = 2,000 g x 1.84 J/(g°C) x (115°C - 100°C)
Energy = 55,200 J
Learn more about latent heat of vaporization here:
https://brainly.com/question/30762921
#SPJ1
given 1.00 l of a solution that is 0.100 m in sodium propionate (nac 3 h5 o2 ) and 0.300 m in propionicacid (hc3 h5 o2 ), what is the ph after 0.0400 mole of hno3 is added? assume that the volume does notchange upon addition of the hno 3 . ka for hc3 h5 o2
The pH after addition of 0.0400 mole of HNO3 is 4.13
First, determine the pKa using the provided Ka.:
pKa = -log Ka
pKa = -log 1.3 x 10-5 pKa = 4.8861
Then, determine how many moles of propionic acid HA and propionate A were present in the initial solution.
NHA= (0.300 M) (1.00 L) = 0.300 mol HA
NA- = (0.100 M) (1.00 L) = 0.100 mol A
Calculate the acid and base amounts again after 0.0400 mol of acid has been added. By doing this, the amount of acid will rise while the amount of base will fall:
nHA= 0.300 mol + 0.0400 mol = 0.340
nA = 0.100 mol-0.0400 mol = 0.060
Put the parameters into the Henderson-Hasselbalch equation at the end. Keep in mind that the ratio of concentrations and the ratio of moles are the same:
pH = pKa + log [A]/ [HA]
pH = pKa + log (nA-/V) / (nHA/ V)
pH = pKa + log nA- / nHA
pH 4.8861+ log = 0.060 /0.340
pH = 4.1328
To know about pH change
https://brainly.com/question/13022365
#SPJ4
Can someone help me with this
A physical change during digestion would be the mechanical grinding of food materials while a chemical change would be the breaking down of complex molecules into simpler ones.
Physical and chemical changes during digestionDuring digestion, food is broken down into smaller molecules that can be absorbed and used by the body. This process involves both physical and chemical changes.
Physical changes include mechanical digestion, where food is physically broken down into smaller pieces by chewing, grinding, and churning in the stomach.
Chemical changes involve the action of digestive enzymes, which break down large molecules into smaller ones. Carbohydrates are broken down into sugars, proteins into amino acids, and fats into fatty acids and glycerol. These smaller molecules can then be absorbed into the bloodstream and used by the body for energy and other functions.
More on digestions can be found here:https://brainly.com/question/29028558
#SPJ1
A 36 L tank of ammonia has a pressure of 11.5 kPa. Calculate the volume of the ammonia if its pressure is changed to 9.3 kPa while its temperature remains constant.
Boyle's Law-
[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]
(Pressure is inversely proportional to the volume)
Where-
[tex]\sf V_1[/tex] = Initial volume[tex]\sf V_2[/tex] = Final volume[tex]\sf P_1[/tex] = Initial pressure[tex]\sf P_2[/tex] = Final pressureAs per question, we are given that -
[tex]\sf V_1[/tex] = 36L[tex]\sf P_1[/tex] =11.5KPa[tex]\sf P_2[/tex] = 9.3KPaNow that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -
[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]
[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 11.5 \times 36= 9.3\times V_2\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{11.5 \times 36 }{9.3}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 414}{9.3}}\\[/tex]
[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 =44.5161.....\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 44.52 \:L }\\[/tex]
Therefore, the volume of the ammonia will become 44.52 L if its pressure is changed to 9.3 kPa while its temperature remains constant.
a cup of sugar has a volume of 237.0mL. What is the mass of the cup of sugar if the density is 1.59g/mL?
carbonyl compounds can be protonated on the carbonyl oxygen. explain why butanoic acid is more readily protonated than butanone.
Butanoic acid has an adjacent carboxyl group that withdraws electron density, making it more readily protonated than butanone.
Both butanoic corrosive and butanone contain a carbonyl gathering, which is an electron-insufficient carbon particle twofold clung to an oxygen molecule. This makes the carbonyl carbon more helpless to nucleophilic assault, including protonation by a solid corrosive.
Nonetheless, butanoic corrosive is more promptly protonated than butanone because of the presence of the neighboring carboxyl gathering. The electronegative oxygen molecule in the carboxyl gathering pulls out electron thickness from the carbonyl oxygen, making it more electron-lacking and subsequently more defenseless to protonation by a solid corrosive. Conversely, butanone misses the mark on extra electron-pulling out bunch, so its carbonyl oxygen is less electron-insufficient and less inclined to be protonated by a solid corrosive.
Generally speaking, the presence of contiguous electron-pulling out gatherings can build the reactivity of carbonyl mixtures towards protonation.
To learn more about carbonyl compounds, refer:
https://brainly.com/question/13086301
#SPJ4
the base ionization constant is described by which of the following? select the correct answer below: the base ionization constant is the equilibrium constant for the equilibrium between a conjugate base and its parent acid. the base ionization constant is the ratio of the concentration of the ionized base to the initial base concentration times 100%. the base ionization constant is the equilibrium constant for the ionization of a base. none of the above
The base ionization constant is defined as the equilibrium constant for the equilibrium of the reaction between a conjugate base and its parent acid. Option (A) is correct.
The ionization constant of the reaction can be defined as a constant that depends upon the equilibrium between the ions and the molecules of the reaction that are not ionized in a solution or in the liquid. It is expressed as the symbol as K. It is also called as the dissociation constant. The base ionization constant is generally calculated by the multiplication of the concentrations of the hydrogen ions of the reaction and the concentration of the conjugate base of the reaction. Then the value is divided by the concentration of the acid of the reaction.
A base ionization constant is defined as the equilibrium constant for the ionization of a base of the reaction. It can be expressed as [tex]K_{b}[/tex]. We can take an example of ammonia, This is the expressed in the form of,
[tex]K_{b}[/tex] = [[tex]NH_4^{+} }[/tex]][[tex]OH^{-}[/tex]][[tex]NH_{3}[/tex]]
[tex]K_{b}[/tex] is a reflection of the strength of the base of the reaction. It is evident that weak bases with relatively high [tex]K_{b}[/tex] values are generally stronger than bases of the reaction with relatively low [tex]K_{b}[/tex] values of the base of the reaction.
To learn more about base ionization constant
https://brainly.com/question/9952073
#SPJ4
The base ionization constant is described by which of the following?
select the correct answer below:
A. the base ionization constant is the equilibrium constant for the equilibrium between a conjugate base and its parent acid.
B. the base ionization constant is the ratio of the concentration of the ionized base to the initial base concentration times 100%.
C. the base ionization constant is the equilibrium constant for the ionization of a base.
D. none of the above
Answer:
The base ionization constant is the equilibrium constant for the ionization of a base.
Explanation:
The base ionization constant is denoted by the symbol Kb and is defined as the equilibrium constant for the ionization of a base in water.
Recall that a base, B, will undergo base ionization in water according to the following equation.
B(aq)+H2O(l)↽−−⇀BH+(aq)+OH−(aq)
The equilibrium constant for this reaction is:
Kb=[BH+][OH−][B]
Generally, we only discuss the equilibrium constants for weak bases, as strong bases dissociate completely in water.
which of the following is not true of acid-base neutralization? select the correct answer below: an acid combined with a strong base will always yield a strongly basic solution. a weak acid plus a weak base can yield either an acidic, basic, or neutral solution. a strong acid and a strong base, combined in equal amounts, will react to form a neutral solution. a strong acid plus a weak base, combined in equal amounts, yields a weakly acidic solution.
An acid combined with a strong base will always yield a strongly acidic solution. So the statement (a) is not true.
A strong base is defined as a compound that has an ability to remove a proton from a very weak acid of the reaction. Strong bases completely dissociate into its ions when in water. It is a base which is completely dissociated in an aqueous solution. It is a base which is ionizes completely in an aqueous solution. A weak base is defined as a base that ionizes only slightly of an aqueous solution. When an acid gets combined with a strong base it will always yield a strongly acidic solution not an basic solution. We know that a strong acid and a strong base when combined in equal amounts they will react to form a neutral solution.
To learn more about strong base
https://brainly.com/question/7245674
#SPJ4
which of the following is not true of acid-base neutralization? select the correct answer below:
a. an acid combined with a strong base will always yield a strongly basic solution.
b. a weak acid plus a weak base can yield either an acidic, basic, or neutral solution.
c. a strong acid and a strong base, combined in equal amounts, will react to form a neutral solution.
d. a strong acid plus a weak base, combined in equal amounts, yields a weakly acidic solution.
what is the mole ratio for NH3 and H2
The mole ratio of NH3 to H2 is 2:3.
What is mole ratio?Mole ratio is a term used in chemistry to describe the relative amounts of two or more substances involved in a chemical reaction. It refers to the ratio of the number of moles of one substance to the number of moles of another substance in a chemical reaction.
The mole ratio of NH3 to H2 in the chemical reaction where NH3 and H2 react to form NH3 is:
N2 + 3H2 -> 2NH3
The balanced equation shows that one molecule of N2 reacts with three molecules of H2 to produce two molecules of NH3. Therefore, the mole ratio of NH3 to H2 is 2:3.
Learn more about mole:
https://brainly.com/question/26416088
#SPJ1
The density of water is 1g/mL. How much mass do 2L of water have?
Answer: The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.
tin ( , ) is a soft metal that is used in alloys such as bronze. melts at , and has a heat of fusion of what is the entropy change of a sample of of in , when it melts at ?
The entropy change of a sample of 26.7g of Sn in J/K when it melts at 232°C is 0.055 J/K.
We can use the formula ΔS = ΔHfus/T to calculate the entropy change of a sample of Sn as it melts at 232°C, where ΔHfus is the heat of fusion and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin by adding 273.15 to it;
T = 232°C + 273.15
= 505.15 K
Next, we need to calculate the number of moles of Sn in the sample. We can do this using the molar mass of Sn;
n = m/M = 26.7 g / 118.71 g/mol
= 0.2246 mol
Now we can use the formula to calculate the entropy change:
ΔS = ΔHfus/T = (7.03 kJ/mol) / (0.2246 mol × 505.15 K)
= 0.055 J/K
To know more about entropy change here
https://brainly.com/question/4526346
#SPJ4
--The given question is incomplete, the complete question is
"Tin (Sn, MM = 118.71G/mol) is a soft metal that is used in alloys such as bronze. Sn melts at ,232 degree C, and has a heat of fusion of Δ Hf = 7.03 KJ/mol. what is the entropy change of a sample of 26.7g of Sn in J/K when it melts at 232 degree C?"--
An arctic weather balloon is filled with 45.5 L of helium gas inside a prep shed. The temperature inside the shed is 9 degrees Celsius. The balloon is then taken outside, where the temperature is -14 degrees Celsius. Calculate the new volume of the balloon. You may assume the pressure on the balloon stays constant at exactly 1 ATM. Be sure your answer has the correct number of significant digits.
The new volume of the balloon outside is approximately 41.8 L.
What is Temperature?
Temperature is a physical quantity that measures the degree of hotness or coldness of an object or a system. It is a measure of the average kinetic energy of the particles (such as atoms and molecules) that make up the object or system. The higher the temperature, the greater the average kinetic energy of the particles, and the hotter the object or system feels.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The equation is:
(P1 × V1) ÷ T1 = (P2 × V2) ÷ T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, and P2, V2, and T2 are the final pressure, volume, and temperature.
In this case, we can assume that the pressure on the balloon stays constant at exactly 1 ATM. So we can simplify the equation to:
V1 ÷ T1 = V2 ÷ T2
We can now substitute the given values into the equation:
V1 = 45.5 L (initial volume inside the prep shed)
T1 = 9°C + 273.15 = 282.15 K (initial temperature inside the prep shed)
T2 = -14°C + 273.15 = 259.15 K (final temperature outside)
V2 = ?
Now we can solve for V2:
V2 = (V1 × T2) ÷ T1
V2 = (45.5 L × 259.15 K) ÷ 282.15 K
V2 = 41.8 L
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
What is the concentration (molarity) of a solution that contains 38.3 grams NaCl in 1.5 L of solution?
The concentration (molarity) of the solution that contains 38.3 grams of NaCl in 1.5 L of solution is 0.437 M
How do i determine the molarity of the solution?First, we shall obtain the mole of NaCl. Details below:
Mass of NaCl = 38.3 grams Molar mass of NaCl = 58.5 g/molMole of NaCl = ?Mole = mass / molar mass
Mole of NaCl = 38.3 / 58.5
Mole of NaCl = 0.655 mole
Finally, we shall determine the molarity of the solution. Details below:
Mole of NaCl = 0.655 molesVolume of solution = 1.5 LMolarity of solution = ?Molarity of solution = mole / volume
Molarity of solution = 0.655 / 1.5
Molarity of solution = 0.437 M
Thus, the molarity of the solution is 0.437 M
Learn more about molarity:
https://brainly.com/question/16073358
#SPJ1
Select the word or phrase from the drop-down menu to describe ionic compounds.
A formula unit represents the simplest ratio of elements in a
of an ionic compound.
A crystal is made up of
There are two magnesium ions for every two sulfide ions in magnesium sulfide. The ratio of Mg to S in the formula unit is
1) A formula unit represents the simplest ratio of elements in a (crystal) of an ionic compound.
2) A crystal is made up of: many atoms that are arranged in a regular pattern
3) There are two magnesium ions for every two sulfide ions in magnesium sulfide. The ratio of Mg to S in the formula unit is: 1:1
The proportional proportions of the cations and anions affect the structure of an ionic compound. Salts, oxides, hydroxides, sulfides, and the vast bulk of inorganic compounds are examples of ionic compounds. The electrostatic pull between the positive and negative ions holds together ionic solids.
For instance, sodium ions attract chloride ions, and chloride ions attract sodium ions. Na+ and Cl- ions are arranged alternately to form a three-dimensional framework. This particle is made of sodium chloride. Because there are as many sodium ions as there are chloride ions, the diamond is uncharged. The ions are held in the formations by the forces of attraction between them.
learn more about ionic compounds here:
https://brainly.com/question/3222171
#SPJ1
Answer:
1. ✔ crystal. , ✔ many atoms that are arranged in a regular pattern. , ✔ 1:1.Explanation:
Select the word or phrase from the drop-down menu to describe ionic compounds.
A formula unit represents the simplest ratio of elements in a : ✔ crystal. of an ionic compound.
A crystal is made up of : ✔ many atoms that are arranged in a regular pattern.
There are two magnesium ions for every two sulfide ions in magnesium sulfide. The ratio of Mg to S in the formula unit is : ✔ 1:1.
fatty acids are categorized based on the carbon chain length as well as: the number of sulfur-containing groups. their solubility in water. the types and locations of bonds between the carbons. the number of acid groups in the fatty acid chain.
The length of the carbon chain and the types of bonds that connect the carbon atoms in fatty acids are used to categorize them.
A fatty acid is an aliphatic carboxylic acid having a saturated or unsaturated aliphatic chain.
Different fatty acids have different carbon chains (number of carbons in the fatty acid). From 4 and 24 carbon atoms make up the majority of fatty acids, with even numbers (i.e., 8, 18) occuring more commonly than odd ones (i.e. 9, 19).
No carbon-carbon double bonds can be found in saturated fatty acids, while one can be found in monounsaturated fatty acids and two or more can be found in polyunsaturated fatty acids.
The length of the C chain affects how soluble fatty acids are in water. The fatty acid will be harder to dissolve in water the longer the C chain, resulting in a lower solubility rating.
To know about fatty acids
https://brainly.com/question/17465355
#SPJ4