The average gradient of the stream is 0.3 meters/kilometer (m/km).
To calculate this, we need to determine the change in elevation over the distance of 200 kilometers. Therefore, the difference in elevation is 600 meters (the starting elevation) minus the elevation at the ocean (assumed to be 0 meters). Dividing this difference (600 meters) by the distance (200 kilometers) gives us the average gradient: 0.3 m/km.
It is important to remember that this is only an average, and the gradient of a stream is not constant throughout its course. Factors such as terrain, obstacles, and rainfall will all affect the gradient of the stream, making it higher or lower at certain points. It is also important to note that a negative gradient means the elevation of the stream is decreasing, while a positive gradient indicates that the elevation is increasing.
In conclusion, the average gradient of the stream beginning at 600 meters and flowing 200 kilometers to the ocean is 0.3 m/km.
For more such questions on Average gradient.
https://brainly.com/question/7472207#
#SPJ11
Sarah needed to get her computer fixed. She took it to the repair store. The technician at the store worked on the computer for 4.25 hours and charged her $54 for parts. The total was $585.25. Write and solve an equation which can be used to determine
�
x, the cost of the labor per hour.
Sarah was charged $54 for parts after the store's technician worked on the computer for 4.25 hours. The cost came to $585.25. The value of x is $125.
Let's use the variable x to represent the cost of the labor per hour.
The technician worked on the computer for 4.25 hours, so the cost of the labor would be:
4.25x
The technician also charged Sarah $54 for parts. So the total cost of the repair is:
4.25x + 54
We know that the total cost of the repair was $585.25. Therefore, we can write the following equation:
4.25x + 54 = 585.25
To solve for x, we need to isolate the variable on one side of the equation. First, we can subtract 54 from both sides:
4.25x = 531.25
Next, we can divide both sides by 4.25:
x = 125
Therefore, the cost of the labor per hour is $125.
To learn more about cost, refer:-
https://brainly.com/question/19326587
#SPJ1
aml exam four minimum pieces of identifying information for individuals are required in the identity verification process. which of the following is correct?
In the identity verification process, at least four pieces of identifying information are needed for individuals to be able to confirm their identities. The following are the correct minimum pieces of identifying information for individuals required in the identity verification process:
Full nameA valid photo ID, such as a driver's license, passport, or national ID number Date of birth Address According to the anti-money laundering laws and regulations, these four identifying pieces of information are necessary to confirm an individual's identity. The goal of identity verification is to ensure that a customer is who they claim to be and to avoid fraudulent activity. Identity verification has become an important part of any institution's compliance efforts as a result of increased regulatory scrutiny. It is critical that businesses and organizations are aware of their regulatory obligations when it comes to verifying customer identities, and that they implement effective identity verification methods to mitigate the risk of fraud and ensure regulatory compliance .
Therefore, when verifying the identity of a customer, the above information should be obtained in a secure and confidential manner, with the customer's consent. These documents must be checked for signs of forgery or tampering, and the customer must be given the opportunity to provide additional documentation if necessary.
for such more questions on minimum pieces
https://brainly.com/question/25075666
#SPJ11
five girls and five boys randomly sit in ten seats that are equally spaced around a circle. the probability that there is at least one diameter of the circle with two girls sitting on opposite ends of the diameter is , where and are relatively prime positive integers. find .
The probability that there is at least one diameter of the circle with two girls sitting on opposite ends of the diameter is [tex]\frac{7}{12}[/tex] , where 7 and 12 are relatively prime positive integers. The answer is 7+12=19.
The probability that there is at least one diameter of the circle with two girls sitting on opposite ends of the diameter is 1 minus the probability that no diameter of the circle has two girls sitting on opposite ends of the diameter.
There are
[tex]{10\choose5}[/tex] =252
ways to seat the five girls and five boys.
There are 5 ways to choose a diameter of the circle.
Once this diameter is fixed, there are [tex]{5\choose2}[/tex] = 10 ways to choose a pair of seats on the diameter to place two girls (in the order in which they appear counterclockwise).
There are 5!=120 ways to seat the remaining 3 girls and 5 boys such that no two girls sit on the same diameter.
Hence, there are [tex]5\cdot10\cdot120[/tex] =6000 valid seatings that satisfy the condition in the question.
Thus, the desired probability is 1 - [tex]\frac{6000}{252}[/tex] = [tex]\frac{7}{12}[/tex], as stated above.
Thus, the answer is 7+12 = [tex]\boxed{19}[/tex]
For similar question on probability
https://brainly.com/question/13604758
#SPJ11
Francisco is trying to pick out an outfit for the first day of school. He can choose from 6 pairs of pants, 2 t-shirts, and 2 pairs of shoes. How many different outfits does Francisco have to choose from?
it might be 12
this is because there are6 pairs and 2 pairs
2×6=12
Answer:24
Step-by-step explanation: 6 times 2 = 12 times 2= 24
To make cleaning easier, a rectangular horse trough will be lined with plastic. The trough is 40 inches long, 14 inches wide, and 24 inches deep. How many square inches of plastic are needed to line the trough? Count only the trough's five faces. A net containing 5 rectangles. Two rectangles have length of 40 inches and width of 14 inches. Two rectangles have length of 14 inches and width of 24 inches. One rectangle has length of 40 inches and width of 24 inches.
Using the area formula for the rectangle, we can find that 2752 in² of plastic is needed to line the trough.
Define area?To determine the area a rectangle occupies within its perimeter, apply the formula for calculating a rectangle's area. Multiplying the length by the width yields the area of a rectangle (breadth).
As a result, the area of a rectangle with the length and breadth l and w, respectively, is calculated as follows. L × W = the rectangle's area. Hence, the area of a rectangle is equal to (length width).
Now in the given question,
We have 5 faces of the cuboid.
Now to find the total area of the required space we have to find the area of all the rectangles.
Area of rectangle with dimensions, l = 40inches and b = 14 inches.
Area = l × b
= 40 × 14
= 560in²
Now there are 2 rectangles with the same dimensions, so the total area = 560 + 560 = 1120in².
Now area of rectangles with dimensions, l = 14 inches and b = 24 inches.
Area = l × b
= 14 × 24
= 336in².
There are 2 rectangles with the same dimensions, so area = 336 + 336 = 672in².
Area of the final rectangle = l × b
= 40 × 24
= 960in².
So, the total required area = 1120 + 672 + 960 = 2752in².
To know more about area of rectangles, visit:
https://brainly.com/question/16309520
#SPJ1
Jahna plans to fill the cup with a fermented tea that costs $0.05 per milliliter. If 1 cubic centimeter equals 1 milliliter, about how much more will the cylindrical cup cost than the conical cup to completely fill with tea? Round to the nearest cent.
As a result, it will cost around $0.84 more to fully fill the cylindrical cup with tea than the conical one.
what is cone ?A cone has a circular base and a pointed apex, or vertex. It is a three-dimensional geometric object. It is created by intersecting a plane with a right circular cone at a perpendicular angle to the base. A mathematical formula can be used to determine a cone's volume and surface area. A cone has a curved surface that gently taper from the base to the vertex. Cones are frequently found in commonplace items like ice cream cones, party hats, and traffic cones. They are also widely used in physics, engineering, and mathematics.
given
The milliliter quantities of both cups must be determined, and the difference between them must be multiplied by the price of tea per milliliter.
Conical cup volume is equal to (1/3) r2 h = (1/3) (5/2) 8 = 209.44 cubic centimeters or 209.44 milliliters.
The volume of a cylindrical cup is equal to r2 + h + (3 + 2) + 8 = 226.19 cubic centimeters or 226.19 milliliters.
Volume difference is equal to 226.19 - 209.44 milliliters.
Filling the cylindrical cup cost 16.75 times $0.05, or $0.84.
As a result, it will cost around $0.84 more to fully fill the cylindrical cup with tea than the conical one.
To know more about cone visit :-
https://brainly.com/question/16394302
#SPJ1
explain the difference in how the lead strips run when comparing linear and cross-hatched grid patterns.
The main difference between linear and cross-hatched grid patterns lies in the orientation of the lead strips. In a linear grid pattern, the lead strips run in one direction, typically from the top of the panel to the bottom. In a cross-hatched grid pattern, the lead strips run in two perpendicular directions, both up and down, and from left to right. This allows for increased flexibility, since it allows the current to be routed in different directions and through different components.
Linear grid patterns are most often used when high current is required in a single direction, since the lead strips are all oriented in the same direction. This allows for more efficient current flow, since all the lead strips are running in the same direction. Cross-hatched grid patterns, on the other hand, are typically used when multiple components need to be connected in different directions, since they are capable of routing current in multiple directions.
Overall, the main difference between linear and cross-hatched grid patterns is the orientation of the lead strips. Linear grid patterns have lead strips that all run in the same direction, while cross-hatched grid patterns have lead strips that run in two perpendicular directions. This allows for increased flexibility in routing current through multiple components, but also reduces efficiency due to the extra lead strips being used.
For more such questions on Linear and cross-hatched grid patterns.
https://brainly.com/question/18443937#
#SPJ11
Luca owns a food truck called The Muffin Man, and this week, he is making a specialty flavor by adding cheddar cheese and hot peppers to corn muffin mix. The mix comes in a box shaped like a rectangular prism with a volume of 60 cubic inches. The box has a length of 5 inches and a height of 8 inches
The width of the rectangular prism box is 1.5 inches if the length of the box is 5 inches and the height of the box is 8 inches.
The volume of a rectangular prism = 60 cubic inches.
The length of the box = 5 inches
The height of the box = 8 inches
To calculate the width of the rectangular prism, we can use the formula for volume:
Volume = length * width * height
Mathematically,
V = l*w*h
60 = 5w * 8
w = 60 / (5 * 8)
w = 1.5 inches
Therefore we can conclude that the width of the rectangular prism box is 1.5 inches.
To learn more about rectangular prism
https://brainly.com/question/21308574
#SPJ4
A ladder is resting against a wall. The top of the ladder touches the wall at a height of 15 feet. Find the distance from the wall to the bottom of the ladder if the length of the ladder is one foot more than twice it's distance from the wall
The distance from the wall to the bottom of the ladder is approximately 5.97 feet.
Let's denote the distance from the wall to the bottom of the ladder as x, and the length of the ladder as y. We know that the top of the ladder touches the wall at a height of 15 feet, which means that the vertical distance from the ground to the top of the ladder is also 15 feet.
By using the Pythagorean theorem, we can write:
y² = x² + 15²
We also know that the length of the ladder is one foot more than twice its distance from the wall, which can be written as:
y = 2x + 1
We can substitute this expression for y into the previous equation and get:
(2x + 1)² = x² + 225
Expanding the left side and simplifying, we get:
3x² + 4x - 224 = 0
This is a quadratic equation, which we can solve using the quadratic formula:
x = (-4 ± √(4² - 43(-224))) / (2×3)
x = (-4 ± √(4 + 2688)) / 6
x ≈ -13.31 or x ≈ 5.97
Find out more about Distance
brainly.com/question/29690241
#SPJ4
tara plans to rent a car for the weekend. the cost to rent the car is $45 plus $0.15 for each mile she drives. write a function for the total cost of the rental. how much is the rental if she travels 500 miles?
The function for the total cost of renting a car for a weekend with a base cost of $45 and a mileage charge of $0.15 per mile can be written as:
Total Cost = 45 + 0.15 * miles driven
where "miles driven" is the number of miles the car is driven over the rental period.
To find out how much it would cost Tara to rent the car if she travels 500 miles, we can substitute "500" for "miles driven" in the function:
Total Cost = 45 + 0.15 * 500
Total Cost = 45 + 75
Total Cost = $120
Therefore, if Tara drives 500 miles over the rental period, the total cost of renting the car for the weekend would be $120.
Hence, the total cost of renting a car for a weekend with a base cost of $45 and a mileage charge of $0.15 per mile can be calculated using the function Total Cost = 45 + 0.15 * miles driven. To find the total cost for a specific number of miles driven, we can substitute that number for "miles driven" in the function.
In this case, if Tara drives 500 miles, the total cost of renting the car would be $120.
To know more about rental period, refer here:
https://brainly.com/question/28132433#
#SPJ11
A farmer is selling watermelons. She has 43 watermelons and plans to sell them for $3 each. The farmer’s total sales, in dollars, is a function of the number of watermelons she sells. Select all the statements that correctly describe the domain or range of this function.
Responses
The domain is the set of all integers from 0 to 43.
The domain is the set of all real numbers from 0 to 43.
The range is the set of all integers between 0 and 129.
The range is the set of all multiples of 3 from 0 to 129.
all that apply
The range is the set of all multiples of 43 from 43 to 129.
Answer:
In summary, the correct statements are:
The domain is the set of all integers from 0 to 43.
The range is the set of all multiples of 3 from 0 to 129.
this is the best i could do, make what you want of it, good luck
Step-by-step explanation:
he domain of this function is the set of all possible inputs, which in this case is the number of watermelons the farmer can sell. Since the farmer has 43 watermelons and cannot sell a fraction of a watermelon, the domain is the set of all integers from 0 to 43. So, the first statement is correct.
The second statement is incorrect because the farmer cannot sell a fraction of a watermelon, so the domain cannot include all real numbers from 0 to 43.
The range of this function is the set of all possible outputs, which in this case is the total sales in dollars. Since the farmer sells each watermelon for $3, her total sales will be a multiple of 3. The minimum sales value is $0 (if she sells no watermelons) and the maximum sales value is $129 (if she sells all 43 watermelons). So, the range is the set of all multiples of 3 from 0 to 129. Therefore, the fourth statement is correct.
The third statement is incorrect because not all integers between 0 and 129 are possible values for the farmer’s total sales. For example, she cannot make $2 in sales because her sales will always be a multiple of 3.
The fifth statement is incorrect because it implies that the farmer can only make sales in multiples of 43, which is not true since she sells each watermelon for $3.
In summary, the correct statements are:
The domain is the set of all integers from 0 to 43.
The range is the set of all multiples of 3 from 0 to 129.
GUYS PLEASE HELP
* I’LL GIVE YOU BRAINLIEST
Write and simplify a polynomial expression to find the area of 4 circles. Each circle has a radius of (4a-6)
π(64a2 - 192a + 144) is the polynomial expression to find the area of 4 circles where circle has a radius of (4a-6) .
what is polynomial ?When variables and coefficients are combined using arithmetic procedures like addition, subtraction, multiplication, and non-negative integer exponents, the result is a mathematical expression known as a polynomial. Any numerical value may be represented by the variables, and the expression's coefficients are constants that combine the variables.
given
A = πr², where r is the circle's radius, is the method for calculating a circle's surface area. The area of one circle can be expressed as follows if the radius of each circle is (4a–6):
A₁ = π(4a-6)²
If we condense this phrase, we get:
A₁ = π(16a² - 48a + 36)
A₂ = π(4a-6)²
A₂ = π(16a² - 48a + 36)
A₃ = π(4a-6)²
A₃ = π(16a² - 48a + 36)
A₄ = π(4a-6)²
A₄ = π(16a² - 48a + 36)
We can add up the areas of each of the four circles to determine their combined area:
A1 + A2 + A3 + A4 Equals A total
A total is equal to π (16a2 - 48a + 36) + π(16a2 - 48a + 36) + π(16a2 - 48a + 36).
π(64a2 - 192a + 144) = A total
π(64a2 - 192a + 144) is the polynomial expression to find the area of 4 circles where circle has a radius of (4a-6) .
To know more about polynomials visit:
https://brainly.com/question/11536910
#SPJ1
The volume of a cube is V = s³, where s is the length of one edge of the cube.
What is the edge length s for each cube?
Drag the answer into the box to match each description.
Answer: s = ∛125 in^3
Step-by-step explanation:
To find the edge length "s" of a cube with volume "V", we use the formula:
s = ∛V
For a cube with a volume of 125 cubic inches, we can find the edge length as:
s = ∛125
s = 5
So the edge length of a cube with a volume of 125 cubic inches is 5 inches.
what happens to the variability of the sampling distribution of the mean as the number of observations units increases?
Larger sample sizes typically result in more precise population mean estimates with lower sampling variability. Thus, when calculating population metrics like the mean, it is frequently preferable to utilize larger sample numbers.
The variability of the sampling distribution of the mean reduces with an increase in the number of observation units. The central limit theorem refers to this.
According to the central limit theorem, the sampling distribution of the mean gets more normal as the sample size grows, and its standard deviation (i.e., the standard error of the mean) drops. Particularly, the square root of the sample size has an inverse relationship with the standard error of the mean.
Learn more about mean here
https://brainly.com/question/15323584
#SPJ4
Solve for z.
d³ = −27
ANSWER FAST PLEASE
Answer:
d=-3
Step-by-step explanation:
d^3=-27
d=[tex]\sqrt[3]{-27} \\[/tex]
d=-3
Answer:
d=-3
Step-by-step explanation:
You must that 3rd root of -27, which is -3
replace each * with a digit that makes the solution of the equation a whole number and find all the possibilities. 10x+11=144*
The * must be replaced by a digit of 1, hence the solution to the equation is given as follows:
x = 143.
What is the rule for divisibility by 10?A number is divisible by 10 if and only if its last digit is 0. This is because 10 is a multiple of 5 and 2, which are the prime factors of 10. Therefore, a number is divisible by 10 if it can be divided evenly by both 5 and 2.
For this problem, the equation is given as follows:
10x + 11 = 144*
Hence, when * = 1, we have that:
10x + 11 = 1441
10x = 1430.
Then the solution for the equation is obtained as follows:
x = 1430/10
x = 143.
More can be learned about divisibility by 10 at https://brainly.com/question/9462805
#SPJ1
you are charged $27.2 in total for a meal. assuming that the local sales tax is 17.15%, what was the menu price of this item?
The menu price of this item was $23.2.
As we have been given the following information:
The total amount charged for the meal = $27.2, and Sales Tax = 17.15% to find the price of the item on the menu, we need to use the following formula: Total Sales = Price + Tax Here, we know the total sales and the tax. We can find the price using the above formula.
Using the formula mentioned above, we have: Total Sales = Price + Tax
$27.2 = Price + (17.15% × Price)
$27.2 = Price × (1 + 17.15%)
$27.2 = Price × (1 + 0.1715)
$27.2 = Price × 1.1715
Price = $27.2 ÷ 1.1715
Price = $23.2
Therefore, the menu price of this item was $23.2.
To learn more about "Total price": brainly.com/question/29141827
#SPJ11
I need help with this question im a lil special
The value of t such that function f(t) = 19 is -5.
EquationsWe have the function f(t) = -3t + 4.
To find the value of t such that f(t) = 19, we need to solve the equation:
-3t + 4 = 19
-3t = 15
t = -5
What is a function?A function in mathematics is a relationship between two sets of inputs—the domain and the range—with the characteristic that each input is associated to exactly one output.
A function is, more precisely, a collection of ordered pairs (x, y) where each value of x is paired with exactly one value of y. Because the output value depends on the input value, it is also known as the dependent variable, whereas the input value, x, is known as the independent variable.
The function notation f(x), where f is the function's name and x is the input value, is a common way to express functions.
To know more about domain and range, click here,
https://brainly.com/question/28135761
#SPJ1
Triangle ABC is graphed.
Answer: 2+2
Step-by-step explanation: easy thanks :)
a supercut hair salon has three stylists. it takes each stylist an average of 10 minutes to serve one customer. what is the capacity of the supercut in customers per hour?
The capacity of Supercut in customers per hour is 18.
The capacity of Supercut is the total number of customers served by three stylists in an hour, considering the average time it takes each stylist to serve one customer. This capacity calculation helps Supercut in keeping up with demand and avoiding long waiting periods, which could discourage clients.
The given data: Supercut salon has three stylists. The average time each stylist takes to serve one customer is 10 minutes. According to the data provided, it takes 10 minutes for each stylist to serve one customer, and there are three stylists. So, in 1 hour (60 minutes), each stylist will have the capacity to serve six clients.
Supercut's total capacity in an hour is calculated by adding up the capacity of each stylist. Therefore, the capacity of Supercut is: Capacity of Supercut = Capacity of each stylist * Number of Stylists= 6 customers * 3 stylists= 18 customers. Therefore, the capacity of the Supercut salon in customers per hour is 18.
To know more about capacity refer here:
https://brainly.com/question/31196313#
#SPJ11
Each school bus going on a field trip holds 36 students and 4 adults
The total number of people going for the field trip is 240 people
What is an Equation?Equations are mathematical statements with two algebraic expressions flanking the equals (=) sign on either side.
It demonstrates the equality of the relationship between the expressions printed on the left and right sides.
Coefficients, variables, operators, constants, terms, expressions, and the equal to sign are some of the components of an equation. The "=" sign and terms on both sides must always be present when writing an equation.
Given data,
The number of students in the school bus = 36 students
The number of adults in the school bus = 4 adults
So,
Total number of people on 1 school bus = number of students + number of adults
Total number of people on 1 school bus [tex]= 36 + 4[/tex]
[tex]= 40 \ \text{people}[/tex]
Now,
Total number of people on 6 school buses = Total number of people on 1 school bus x 6
Total number of people on 6 school buses [tex]= 40 \times 6[/tex]
[tex]= 240 \ \text{people}[/tex]
Hence, the total number of people going for the field trip is 240 people
To learn more about equations click:
https://brainly.com/question/29538993
a poll showed that 45% of americans say they believe that statistics teachers know the true meaning of life. what is the probability (in percent form) of randomly selecting someone who does not believe that statistics teachers know the true meaning of life.
The probability (in percent form) of randomly selecting someone who does not believe that statistics teachers know the true meaning of life is 55%.
If 45% of Americans say they believe that statistics teachers know the true meaning of life, then 55% of Americans do not believe this. Therefore, the probability of randomly selecting someone who does not believe that statistics teachers know the true meaning of life is 55%.
Percentage is referred to as the expression in which the number is written as multiple of 100 and the symbol to show percentage of a number is %. Now we need to express the value in percentage.
Expressing this as a percentage, we have:
55% = 55/100 * 100% = 0.55 * 100% = 55%
Learn more about Probability at:
brainly.com/question/24756209
#SPJ4
Simplify. 2x + 6x^2 - 10 + 4x^2 - 3X + (-6) =
Answer:
[tex]\boxed{\mathtt{10x^{2}-x-16}}[/tex]
Step-by-step explanation:
[tex]\textsf{For this problem, we are asked to simplify the given expression.}[/tex]
[tex]\textsf{Consider noting that this expression has like terms, meaning we can combine them.}[/tex]
[tex]\large\underline{\textsf{What are Like Terms?}}[/tex]
[tex]\textsf{Like terms are 2 or more terms that share similarity. They aren't different in a major way.}[/tex]
[tex]\textsf{Like terms are terms with the same type of number, variable, and or exponent.}[/tex]
[tex]\large\underline{\textsf{Combine Like Terms:}}[/tex]
[tex]\mathtt{2x+6x^{2}-10+4x^{2}-3x-6}[/tex]
[tex]\boxed{\mathtt{10x^{2}-x-16}}[/tex]
Which of the following shows that the two composite figures cover the same area?
-7
5-
y
7
The two composite figures cover the same area, A = 4+2+2+1= 9 units²
What is the area of the rectangle?
To find the area of a rectangle, we multiply the length of the rectangle by the width of the rectangle.
we know that
The area for both composite figures is equal to the area of a square plus the area of two isosceles right triangles plus the area of a smaller isosceles triangle
So
Area of the square
A = 2² = 4 units²
Area of the isosceles right triangle
A = (1/2) (2) (2) = 2 units²
Area of the smaller isosceles triangle
A = (1/2)(2)(1) = 1 units²
The area of the composite figure is
A = 4+2+2+1= 9 units²
Hence, the two composite figures cover the same area, A = 4+2+2+1= 9 units²
To learn more about the area of the rectangle visit:
brainly.com/question/2607596
#SPJ1
Yeidalis needs three pieces of wood as shown to create a new work of art. The pieces of wood she is going to use are sold in 15-inch-wide boards. What is the minimum length board that Yeidalis must buy in order to have enough to complete her artwork?
The longest piece of wood we need is the bottom left piece, which requires a board of at least 15 inches in length
How to determine the minimum length board that Yeidalis must buy in order to have enough to complete her artworkBased on the dimensions provided in the image, we can see that Yeidalis needs a board that is at least as long as the longest piece of wood required.
The longest piece of wood required is the diagonal of the rectangle with dimensions 12 inches and 9 inches.
Using the Pythagorean theorem, we can calculate the length of this diagonal as:
sqrt(12^2 + 9^2) = sqrt(144 + 81) = sqrt(225) = 15 inches
So Yeidalis needs a board that is at least 15 inches long to create her artwork.
Learn more about Pythagorean theorem at https://brainly.com/question/343682
#SPJ1
A train is moving at a rate of 65 miles/hour toward a railroad marker located 200 miles away. Which equation could be used to find the time it will take for the distance between the train and the railroad marker to be 4 miles apart, where h represents the time in hours?
The distance d between the train and the railroad marker can be expressed as:
d = 200 - 65h
where 200 represents the initial distance between the train and the marker, and 65h represents the distance the train has covered after h hours, assuming a constant speed of 65 miles per hour.
To find the time it will take for the distance between the train and the marker to be 4 miles apart, we can set d to 4 and solve for h:
4 = 200 - 65h
65h = 196
h = 196/65
So the equation to find the time it will take for the distance between the train and the railroad marker to be 4 miles apart is:
200 - 65h = 4
or
65h = 196
or
h = 196/65
suppose that a 17 ft ladder is sliding down a wall at a rate of 6 ft/sec. at what rate is the bottom of the ladder moving when the top is 8 ft from the ground?
The bottom of the ladder is moving at a rate of 1.333 ft/sec when the top is 8 ft from the ground
The bottom of the ladder is moving at a rate of 6 ft/sec when the top is 8 ft from the ground. This can be found by using the equation v = d/t, where v is the velocity, d is the distance, and t is the time. The distance is 8 feet (from the top of the ladder to the ground) and the time is 1/6 seconds (since the ladder is sliding down at a rate of 6 ft/sec). Therefore, the velocity of the bottom of the ladder when the top is 8 ft from the ground is 8/1/6 = 8/6 = 4/3 = 1.333 ft/sec.
To understand this concept more clearly, imagine a ball rolling along the ground. Its velocity is constant until it hits a slope and begins to move down the slope. At this point, its velocity increases as it moves further down the slope, and its velocity is higher when it is further down the slope.
This is the same concept as the ladder sliding down the wall; the bottom of the ladder is moving faster than the top, so the velocity of the bottom of the ladder increases as the top of the ladder gets closer to the ground.
In conclusion, the bottom of the ladder is moving at a rate of 1.333 ft/sec when the top is 8 ft from the ground. This can be found using the equation v = d/t, where v is the velocity, d is the distance, and t is the time. The distance is 8 feet and the time is 1/6 seconds since the ladder is sliding down at a rate of 6 ft/sec.
See more about velocity at: https://brainly.com/question/25749514
#SPJ11
answer question please but DO NOT ROUND IT . 1 / 3*5 + 2
[tex]=\frac{1}{15} +2\\[/tex]
⇒We can only add the numbers if they have the same denominator, to do so we can first convert 2 into a fraction
[tex]=\frac{1}{15} +\frac{2(15)}{1(15)} \\=\frac{1}{15} +\frac{30}{15} \\=\frac{31}{15} \\[/tex]
the dimensions of the hole are 4-1/4 inches in diameter and at least 4-1/2 inches deep. group of answer choices true false
Answer:
True
Step-by-step explanation:
I did it
In most situations, data collection should only begin after:a. the researcher has requested primary data neede.b. the research design process is finishedc. there is certainty for funding for the researchd. data analysisis complete
It is important to plan for data analysis during the research design process, so that the appropriate methods for data analysis can be chosen and the necessary resources can be allocated.
In most situations, data collection should only begin after the research design process is finished. This is because the research design process involves deciding on the research questions, hypotheses, variables, and methods of data collection and analysis. Once these decisions are made, it is important to finalize the research design before beginning data collection.
Starting data collection before the research design is finished can lead to problems such as collecting irrelevant data, collecting data that does not answer the research questions, or collecting data in a way that is not appropriate for the research design. Therefore, it is important to complete the research design process before beginning data collection.
While it is important to have funding for the research, it is not necessary to have certainty for funding before beginning data collection. In many cases, researchers may start data collection with partial funding, and then apply for additional funding once the initial data has been collected.
Similarly, data analysis should not be complete before data collection, as data collection is a necessary first step in the research process. However, it is important to plan for data analysis during the research design process, so that the appropriate methods for data analysis can be chosen and the necessary resources can be allocated.
To learn more about research design visit: https://brainly.com/question/14676018
#SPJ11