Identify the methods used to monitor a reaction as it occurs in the reaction flask. polarimeter O A spectrometer OB pressure measurement Ос. D. all of the above choices are correct

A bleaching solution requires 6. 55 g of sodium hypochlorite. 30.47 grams of a 21. 5% by mass solution of sodium hypochlorite should be used

Mass of sodium hypochlorite = 6.55 g

percent composition = 21. 5%

This indicates that there are 21.5 grams of sodium hypochlorite present in every one hundred grams of solution.

Now calculate the number of grams of solution for 6.55 g of solution.

(6.55 g x 100) / 21.5 g = 30.47 g

Therefore, you will need 30.47 grams of a sodium hypochlorite solution that has a mass concentration of 21.5% in order to obtain 6.55 grams of sodium hypochlorite.

You can also learn about percent composition from the following question:

https://brainly.com/question/17505281

#SPJ4

B) 2, 7, and 8 of the following molecules act as building blocks (monomers) of polypeptides.

You may think of it as several flavors that come together to form lengthy chains that we refer to as polypeptides, which are the fundamental components of proteins.

Peptide bonds bind the amino acids together in polypeptides. The interaction between the -carboxyl and -amino groups of two amino acids results in the formation of a dipeptide.

learn more about polypeptides

https://brainly.com/question/11136648

#SPJ4

Physical properties  such as  mass, weights , density can be common for one or more substances hence cannot be used for identification while magnetism is unique for each substance ,hence used for identification.

Any property which describes the state of a physical system is called as a physical property.Changes in physical properties are used to describe changes between the states. They are often related to as observable properties.

Physical property which can be quantified is a physical quantity. These are also classified further with respect to their directionality. Physical properties are differentiated from chemical properties by the way they determine how a substance behaves in a chemical reaction.

Learn more about physical properties,here:

https://brainly.com/question/18327661

#SPJ1

Answer:

D is the answer i think

When we add water to a glass of pure fruit the volume of the solution increases while the solute remains constant so the molarity of the juice decreases.

Molarity is defined as the amount of solute (in moles)in per litre of solution.

It is also known as molar concentration of a solution , It is expressed in mol/l .

When water is added the volume of the solution is increasing for fixed moles of juices therefore ,

The molarity of the juice will decrease and option d is correct.

To know more about molarity

https://brainly.com/question/2817451

#SPJ2

Answer:

las plantas

Explanation:

Las plantas son los seres vivos capaces de transformar energía luminosa utilizando agua y dióxido de carbono (CO₂) en energía química en forma de moléculas llamadas carbohidratos. El proceso a través del cual realizan esto se denomina fotosíntesis, y para ello requieren un pigmento de color verde denominado clorofila, el cual es necesario para captar la energía luminosa proveniente del Sol.

The rate constant at 65 C is k65= 4.8 x 10^-5 s^-1 .Below is the explanation for the answer

To find the rate constant at a different temperature, you can use the Arrhenius equation, which relates the rate constant to the activation energy and the temperature. The equation is:

k = A * e^(-Ea/RT)

where
k is the rate constant,
A is the pre-exponential factor (also known as the frequency factor),
Ea is the activation energy,
R is the universal gas constant,
T is the absolute temperature.

We are given that the activation energy is 83.5 kJ/mol and the rate constant at 45 C is 3.54 x 10^-5 s^-1. To find the rate constant at 65 C, we can substitute these values into the equation and solve for k.

k = A * e^(-Ea/RT)
k = 3.54 x 10^-5 s^-1 * e^(-(83.5 kJ/mol) / (8.314 J/mol*K * (45 + 273.15 K))

However, A is a constant that we don't know. To find the rate constant at 65 C, we can use the fact that the rate constant is proportional to the temperature. Therefore, we can find the ratio of the rate constants at 65 C and 45 C, then multiply it by the rate constant at 45 C to find the rate constant at 65 C.

k65/k45 = (T2/T1)^n
where
k65 is the rate constant at 65 C
k45 is the rate constant at 45 C
T2 is the temperature in Kelvin (65 + 273.15)
T1 is the temperature in Kelvin (45 + 273.15)
n is the order of the reaction, which is 1 in this case

we can find the rate constant at 65 C is:
k65 = k45 (T2/T1)^n
k65 = 3.54 x 10^-5 s^-1 * ( (65 + 273.15) / (45 + 273.15) )^1

k65= 4.8 x 10^-5 s^-1

Learn more about Rate Constant here: brainly.com/question/14977272

#SPJ4

Answer:

C. Theories have been confirmed through tests; hypotheses haven't.

Hope this helps!!

Direct evidence for the interior of the Earth comes from measurements and samples that are taken directly from the Earth's interior. This can include things like rock samples from deep mines, or measurements of seismic waves that have traveled through the Earth.

One example of direct evidence is rock samples that have been brought to the surface by volcanic eruptions or other means. These samples can provide geologists with information about the composition and structure of the Earth's interior. For example, by studying the minerals in a rock sample, geologists can infer the temperatures and pressures that existed in the Earth's interior when the rock was formed.

Indirect evidence, on the other hand, is information that has been inferred from measurements or observations that are not taken directly from the Earth's interior. One example of indirect evidence is the study of seismic waves, which are waves of energy that travel through the Earth's interior in response to earthquakes or other disturbances. By measuring the speed at which these seismic waves travel through the Earth, geologists can infer the density and composition of the materials that make up the Earth's interior.

Answer:

Bacteria decompose rotting plant animal material.

Explanation:

Theres good bacteria, and theres bad bacteria. some helps, and some makes things worse. so really, in some sense all of the above.

Hope that helps.

Bacteria are necessary for life because they help produce oxygen for plants and animals. Similarly bacteria decompose rotting plant and animal materials.

Bacteria are a type of organism which are classified as a kingdom of life. Bacteria are prokaryotic microbes that can spread diseases in animals and plants.

Some of the bacteria are very useful in for our life. Some of them are autotrophs thus, produce energy and oxygen. For example cyanobacteria release oxygen which is used animals and plants to respire.

Bacteria are very essential to degrade wastes and remove them from the  surface. They consume the decomposing plants and animals and make them biodegradable. Some bacteria living in plants helps in nitrogen cycle as well.

Find more on significance of bacteria:

https://brainly.com/question/14225790

#SPJ2

Here, naphthalene is being burned in a water-filled bomb calorimeter.

What is Combustion?

Combustion is a chemical reaction between a fuel and an oxidizer in which heat, light, and other products of combustion are released. The most common type of combustion is the burning of hydrocarbon fuels, such as natural gas or gasoline, to produce carbon dioxide and water vapor as the main products.

Heat of combustion = [mass of water x specific heat capacity x (final temperature - initial temperature)] / (mass of naphthalene)

Heat of combustion = (650 g x 4.185 J/g∙°C x 6.4°C) / (0.5 g)

Heat of combustion = 16,914 J/g

Heat of combustion = 16,914 J/g x (1 mol/128 g)

Heat of combustion = 131.5 kJ/mol

Hence, the heat of combustion is 131.5 kJ/mol.

To know more about combustion,

https://brainly.com/question/10458605

#SPJ4

Answer:

To find molarity we must convert grams KCl to moles KCl and mL solution to L: ... EXAMPLE: What mass of potassium chloride would be needed to prepare 250.0 mL of a 0.500 ... EXAMPLE: Silver nitrate solution is added to 25.00 mL of a 0.500 M potassium chloride ... g) 0.655 g of sodium carbonate in 100.0 mL of solution.

Explanation:

The supplied statement indicates that the compound's molecular formula is (CH)ₙ = CH₆ = C₆H₆

Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is now most widely employed are urea manufacturing and petroleum refining, with the developing markets of utilities and transportation.

The lowest half figure ratio of a compound is revealed by the empirical formula for that molecule.

Empirical weight formula: 12 + 1 Equals 13.

Molecular weight = 78

n = Molecular weight/Empirical formula weight

n = 78.12/13

n = 6.00

Molecular formula = (CH)ₙ = CH₆ = C₆H₆

To know more about Hydrogen visit:

https://brainly.com/question/24433860

#SPJ1

Chemical: Wear the proper personal protective equipment (PPE) such as gloves, goggles, and an apron or lab coat.

Chemistry is the scientific study of the composition, structure, properties, and reactions of matter, especially at the atomic and molecular levels.

Use the chemical in a well-ventilated area.

Follow safety instructions and product labeling instructions precisely.
Avoid breathing vapors or mists of the chemical.
Immediately wash hands and exposed skin thoroughly with soap and water after contact with the chemical.
Store the chemical in a secure location away from food, drink, and other materials.
Dispose of the chemical properly.

To learn more about chemical
https://brainly.com/question/26487468
#SPJ4

Answer:

An ion is an atom or group of atoms with a positive or negative charge. Ions form when atoms lose or gain electrons to obtain a full outer shell: For elements in groups 1, 2 and 3, the number of electrons lost is the same as the group number.

Explanation:

If an atom loses or gets electrons, it transforms into a charged particle known as an ion. An ion has a charge equal to the sum of its protons' and electrons' charges.

Electrons is defined as the smallest and negatively charged among the atom's constituent particles. The charge  moves from the positive terminal to the negative terminal as a result of the "electrical pressure" brought on by the voltage differential between the positive and negative terminals of a battery.

Depending on whether the number of electrons in an atom is greater or less than the number of protons in the atom, an atom can develop a positive charge or a negative charge. An atom is referred to as an ion when it is drawn to another atom due to an imbalance in its electron and proton numbers.

Thus, if an atom loses or gets electrons, it transforms into a charged particle known as an ion. An ion has a charge equal to the sum of its protons' and electrons' charges.

To learn more about electrons, refer to the link below:

https://brainly.com/question/1255220

#SPJ2

The World Skin Cancer Map shows that Australia has much higher skin cancer rates than Brazil. In Australia, an estimated 5.4 out of 100 people will develop melanoma in their lifetime, compared to 0.4 out of 100 in Brazil.

Skin cancer is a type of cancer that affects the skin cells. It is caused by over-exposure to ultraviolet (UV) radiation from the sun and sun beds. It is the most common type of cancer in the United States, and can affect anyone, regardless of age, gender, or skin color. It is very important to protect your skin from the sun by using sunscreen.

Australia also has higher rates of non-melanoma skin cancer, with estimated rates of 24.3 out of 100 people in Australia, compared to 5.3 out of 100 people in Brazil.

To learn more about Skin Cancer

https://brainly.com/question/13774153

#SPJ1

Thermal energy increases before the water begins to boil.

Thermal energy is produced when the atoms and molecules in matter vibrate faster due to an increase in temperature. As the average kinetic energy of its particles increases, the thermal energy of the object increases.

After reaching water at its boiling point thermal energy remain same because temperature remain constant after reaching once at boiling point. Thermal energy is directly proportional to temperature. Hence, chef will notice two phenomena during water begins to boil.

Learn more about thermal energy visit:

brainly.com/question/7541718

#SPJ4

The goal of the light reaction is to make NADH an high energy electron transporter and ATP an energy storing molecule.

The energy storage molecule ATP and the reduced electron carrier NADPH are produced by the light-dependent processes using light energy, which is required for the subsequent stage of photosynthesis. Light reactions in plants occur in the thylakoid membranes of organelles referred to as chloroplasts.

The light reactions are largely controlled by photosystems, sizable complexes of proteins and pigments (light-absorbing molecules) that are designed to capture light. Photosystem I (PSI) and Photosystem II are the two different types of photosystems (PSII).

Both photosystems have a variety of pigments that aid in the absorption of light energy as well as a unique pair of chlorophyll molecules at the reaction center. P700 denotes the special pair of photosystem I, while P600 denotes the unique pair of photosystem II.

Learn more about light reaction

brainly.com/question/13349357

#SPJ4

Answer:

See explanation

Explanation:

Barium sulphate is easily prepared by means of a double replacement reaction. A double replacement reaction is one in which the ions in each of the reactants exchange partners in the products.

For instance, we can decide to prepare barium sulphate by a double replacement reaction between sodium sulphate and barium chloride. The both starting materials are soluble compounds. However, the barium sulphate formed is an insoluble white precipitate. The precipitate is recovered by filtration, washed and dried.

The reaction equation is shown below;

Na2SO4(aq) + BaCl2(aq)  -------> BaSO4(s) + 2NaCl(aq)

Answer:

3.01×10²⁴ atoms

Explanation:

Our compound is the Na₃PO₄

Sodium phosphate.

We assume, we have 5 moles of the mentioned salt.

1 mol of anything contains 6.02×10²³ atoms.

That's the Avogadro's number. The conversion is:

5 mol . 6.02×10²³ atoms /1mol = 3.01×10²⁴ atoms

Answer:

Term

Liquid    C) takes the shape and volume of an entire container

Plasma    A) charged particles that do not have a definite shape or volume

Solid    B) has a fixed volume and shape

Gas    D) assumes the shape of the part of the container from the bottom up

Aspartic acid and phenylalanine are the two amino acids that make up aspartame, along with methanol. When the body processes this third key ingredient, formaldehyde and formic acid are produced.

Materials, Raw Two amino acids, phenylalanine and aspartic acid, as well as methanol, make up aspartame. L-aspartyl-L-phenylalanine methyl ester is its formal chemical name. Proteins are made up of amino acids, which are frequently referred to as the building blocks of proteins. Aspartame has the chemical formula C14H18N2O5. In foods and beverages, aspartame, a synthetic, non-saccharide sweetener that is 200 times sweeter than sucrose, is frequently used as a sugar substitute. The commercial names for it are NutraSweet, Equal, and Canderel.

Learn more about aspartame here:

https://brainly.com/question/9352908

#SPJ4

At an altitude of 18,000 feet, where the atmospheric pressure is 0.5 atm, the pressure is 7.5 pounds per square inch.

One square inch of any surface has 15 pounds of air sitting on top of it at sea level. That same square inch is only under 7.5 pounds per square inch of pressure at 18,000 feet.

The atmospheric pressure rises with increasing altitude. Contrary to popular belief, the graph shows that pressure decreases as altitude rises (moving to the right on the graph).

At sea level, the atmospheric pressure is 14 pounds per square inch. If we assume that the altitude is zero, we can see that the pressure is equal to 14 pounds per square inch. The atmospheric pressure rises as the altitude gets closer to sea level.

We observe that the pressure value rises as the altitude gets closer to sea level. As the altitude rises, the atmospheric pressure approaches 14 pounds per square foot. Only when the elevation is 0 miles above sea level does the pressure equal 14 pounds per square inch.

The pressure will therefore be 7.5 pounds per square inch if the air pressure in the atmosphere measures at 18,000 feet or 0.5 atm.

To know more about air pressure visit:

https://brainly.com/question/21656406

#SPJ4

With 3.11 grams of sodium chloride we should start to make an aqueous solution of 50. 0 gm.

When water is used as a solvent then the solution is called the aqueous solution. Water is a good solvent which is naturally abundant and in chemistry, the word "solution" refers to the aqueous solution unless the solvent is specified. It is denoted by "aq".

Mass of aqueous solution = 50 gm

Mass percentage of sodium chloride = 6.213%

Let the mass of sodium chloride is N grams, then,

N = (50/100) × 6.213 gm

N = 0.5 × 6.213

N = 3.11 grams

To know more about sodium chloride, here

https://brainly.com/question/30021413

#SPJ4

Complete question:

A spirit burner used 1.00 g methanol to raise the temperature of 100.0 g water in a metal can from 28.00C to 58.0C. Calculate the heat of combustion of methanol in kJ/mol.

Answer:

the heat of combustion of the methanol is 402.31 kJ/mol

Explanation:

Given;

mass of water, [tex]m_w[/tex] = 100 g

initial temperature of water, t₁ = 28 ⁰C

final temperature of water, t₂ = 58 ⁰C

specific heat capacity of water = 4.184 J/g⁰C

reacting mass of the methanol, m = 1.00 g

molecular mass of methanol = 32.04 g/mol

number of moles = 1 / 32.04

                             = 0.0312 mol

Apply the principle of conservation of energy;

[tex]n\Delta H_{methanol} = Q_{water}\\\\n\Delta H_{methanol} = mc\Delta t\\\\n\Delta H_{methanol} = 100 \times 4.184\times (58-28)\\\\n\Delta H_{methanol} = 12,552 \ J\\\\n\Delta H_{methanol} = 12.552 \ kJ\\\\\Delta H_{methanol} = \frac{12.552}{n} \\\\H_{methanol} = \frac{12.552 \ kJ}{0.0312 \ mol} \\\\\Delta H_{methanol} = 402.31 \ kJ/mol[/tex]

Therefore, the heat of combustion of the methanol is 402.31 kJ/mol

Answer:

Ammonium dichromate is an inorganic compound with the formula (NH4)2Cr2O7. In this compound, as in all chromates and dichromates, chromium is in a +6 oxidation state, commonly known as hexavalent chromium. It is a salt consisting of ammonium ions and dichromate ions.

Answer:

Explanation:‎

In the chemical equation,Cl₂ (g) + K+ Br− → K+ Cl− + Br₂ (g) bromine looses an electron in the reaction.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

The complete question is as follows: How many moles of a gas at 100 c does it take to fill a 1.00 l flask to a pressure of 152kPa

Answer: There are 0.0489 moles of a gas at [tex]100^{o}C[/tex] is required to fill a 1.00 l flask to a pressure of 152kPa.

Explanation:

Given: Volume = 1.00 L,    

Pressure = 152 kPa (1 kPa = 1000 Pa) = 152000 Pa

Convert Pa into atm as follows.

[tex]1 Pa = 9.86 \times 10^{-6} atm\\152000 Pa = 152000 \times \frac{9.86 \times 10^{-6}atm}{1 Pa}\\= 1.5 atm[/tex]

Temperature = [tex]100^{o}C = (100 + 273) K = 373 K[/tex]

Using the ideal gas formula as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]PV = nRT\\1.5 atm \times 1.0 L = n \times 0.0821 L atm/mol K \times 373 K\\n = \frac{1.5 atm \times 1.0 L}{0.0821 L atm/mol K \times 373 K}\\n = 0.0489 mol[/tex]

Thus, we can conclude that there are 0.0489 moles of a gas at [tex]100^{o}C[/tex] is required to fill a 1.00 l flask to a pressure of 152kPa.

Answer:

the higher the kinetic energy

Explanation:

because their will be easy movement of particles.