I SERIOUSLY NEED HELP ON THIS WILL GIVE BRAINLIEST TO WHOEVER ANSWERS THIS RIGHT
Fill in the blanks to complete the “rows_asterisks” function. This function should print rows of asterisks (*), where the number of rows is equal to the “rows” variable. The number of asterisks per row should correspond to the row number (row 1 should have 1 asterisk, row 2 should have 2 asterisks, etc.). Complete the code so that “row_asterisks(5)” will print:

*

* *

* * *

* * * *

* * * * *
def rows_asterisks(rows):
# Complete the outer loop range to control the number of rows
for x in range(___):
# Complete the inner loop range to control the number of
# asterisks per row
for y in range(___):
# Prints one asterisk and one space
print("*", end=" ")
# An empty print() function inserts a line break at the
# end of the row
print()


rows_asterisks(5)
# Should print the asterisk rows shown above

PC-relative addressing is a type of memory addressing that specifies the memory location of an operand relative to the address of the next instruction to be executed. In other words, the operand's address is calculated by adding a constant value to the Program Counter (PC) register, which stores the address of the next instruction to be executed.

The PC-relative addressing mode is commonly used in computer architectures with a fixed instruction length. The constant value is typically encoded as a signed integer and can be positive or negative. The relative address is added to the current value of the PC register to obtain the final address of the operand.

A PC-relative address is generated by appending a signed 12-bit value to the address of the instruction referencing it. To generate a 32-bit offset, the 12-bit value is moved left by two bits and sign-extended to the full 32 bits. The operand's address is then calculated by adding the offset to the instruction's address.

Since the memory address is unknown at the time of compilation, a PC-relative addressing strategy is preferable. This approach also makes better use of memory since relative addresses may be stated with fewer bits than absolute addresses.

Learn more about relative addressing:

https://brainly.com/question/30896447

#SPJ11

A test bed is an environment with all the necessary hardware and software to test a software system or component.

To learn more about hardware and software, refer to:

https://brainly.com/question/23004660

According to the pilot report, the significant cloud coverage is overcast, with cloud tops at 2500 feet and 4500 feet.

The pilot report is written in a specific format that provides information about weather conditions and other factors relevant to aviation. In this report, the cloud coverage is described using the abbreviations "ovc-top025" and "ovc045-top090," which indicate that the clouds are overcast and that their tops are at 2500 feet and 4500 feet, respectively.

Overcast conditions mean that the sky is completely covered by clouds, and the sun is not visible.

Learn more about cloud coverage:

https://brainly.com/question/22789805

#SPJ11

True: When a class contains a pointer to dynamically allocated memory, it is a good idea to have the class overload the assignment operator.

This is due to the fact that if the class's default assignment operator is used, it can result in a shallow copy of the pointer to the new object, causing both objects to point to the same memory location. This can lead to issues such as memory leaks, double deletions, and other issues.

Overloading the assignment operator allows the programmer to define the behavior of how objects are copied when they are assigned. The new object is created with its own copy of the data when the operator is overloaded. In this way, it eliminates the possibility of two objects sharing the same memory location, which might be overwritten or deleted in another area of the program.

To learn more about Pointer: https://brainly.com/question/20553711

#SPJ11

When an administrator needs to update Nano Server, they can use Microsoft's Windows Insider Preview Server website to download the updates. This website is a secure Microsoft download site that allows administrators to get the most recent updates for Nano Server.

To update Nano Server, administrators should first download the updates from the website, then extract the files to the local computer. After that, the administrator can deploy the Nano Server update package to the appropriate servers. The administrator can also choose to deploy the update package remotely.

Finally, the administrator can initiate the update process by running the Nano Server Update utility, which is available in the Windows Server 2016 installation media. The utility will then scan the computer and display a list of available updates. The administrator can then select the appropriate update packages and complete the update process.

You can learn more about Nano Server at: brainly.com/question/13063232

#SPJ11

The requirement is to make 1L of 1X buffer using a 10X version of that buffer. The number of ml of 10X required to make up 1L of 1X and the amount of water required to make up the volume of the 10X is to be determined.

A buffer is a solution that is used to maintain the pH of a solution. The ratio of 10X to 1X is 1:10. Therefore, if you have a 10X buffer, you will need to dilute it ten times to make a 1X buffer. So, you'll need to use 100 ml of the 10X buffer to make up 1L of 1X buffer. The required volume of 10X is 100 ml.

To make up 1L of 1X, you'll need to add enough water to the 10X to make a total volume of 1L. So, you'd add 900 ml of water to the 100 ml of the 10X buffer to make up 1L of 1X buffer.

Therefore, to make up 1L of 1X buffer using a 10X version of that buffer, 100 ml of 10X buffer would be required, and 900 ml of water would be required to make up the volume of the 10X.

For such more question on volume

https://brainly.com/question/20226860

#SPJ11

CPU utilization and response time can have conflicting goals because high CPU utilization implies keeping the CPU busy with processes, while low response time implies quick turnaround for processes, which can lead to processes being starved of CPU resources.

Various computer systems may have competing optimization objectives. The following pairs of scheduling criteria may have competing objectives:

1. CPU usage and reaction time:

When a CPU is heavily used, reaction time tends to increase. It might be difficult to strike a balance between high CPU use and low reaction time since high CPU utilization implies a speedy response and low CPU utilization implies a lengthy response. As a result, the CPU usage optimization target may clash with the reaction time optimization goal.

2. Both average turnaround time and maximum waiting time relate to the amount of time it takes for a process in a computer system to finish. The average turnaround time seeks to reduce the time it takes the system to perform all operations, whereas the maximum waiting time seeks to ensure that no process must wait for a lengthy amount of time.

These two criteria contradict each other since reducing average turnaround time may require a few processes to wait for an extended period, increasing in maximum waiting time.

3. I/O device usage and CPU utilization: There is a conflict between these two optimization goals since the CPU and I/O devices compete for processing resources in general. Increased I/O device use, for example, by processing more I/O requests, might result in lower CPU utilization since the CPU must wait for the I/O requests to be processed.

As a result, there is a trade-off between increasing I/O device utilization and reducing CPU utilization.

Learn more about CPU utilization:

https://brainly.com/question/14400616

#SPJ11

a) If the main memory is byte-addressable, each byte needs an address, thus the number of addresses required is equal to the size of the main memory.

Therefore, for a 1M x 8 main memory, the number of bytes is 1M, which equals 220 bytes. Each byte requires an address, so the number of bits required to address the memory is equal to the log base 2 of 220, which is 20 bits.
b) If the main memory is word-addressable, then each word in the memory will need an address, and the size of a word will depend on the machine.

For instance, if the word size is 16 bits, then the memory size would be 512K x 16 bits. Then the number of words will be 512K, which is equal to 219. Since each word requires an address, the number of bits required to address the memory is equal to the log base 2 of 219, which is 19 bits.

for more such questions on byte

https://brainly.com/question/29096787

#SPJ11

The given statement "The arguments in a module call and the parameters listed in the module header must be of compatible data types" is true because the arguments passed in a module call should match the data types of the parameters listed in the module header. .

The module header is a component at the start of each Python file that gives vital information about the file's contents. The module header is made consisting of a docstring that describes what the module does and may also include authorship information.

The stated statement "The arguments in a module call and the parameters listed in the module header must be of compatible data types" is correct. The parameters of a function are the variables that the function receives as input. Arguments, on the other hand, are the values passed to the function when it is called. The data type of the argument when calling a function should be the same as the data type of the relevant parameter stated in the function header.

Learn more about modules in python:

https://brainly.com/question/28379867

#SPJ11

Lynn will need to master business management abilities in order to succeed as an urban farm technician. She will need to comprehend farming economics, such as sales and marketing.

Developing tech-based abilities in areas like irrigation, pesticide use, and enhancing cultivation, harvest, storage, and transport systems are all part of this. This also alludes to agricultural specialists embracing technology advancement.

The income for a BSc in agriculture might range from INR 2.5 to 6 LPA. The wage is significantly influenced by a number of important elements, including education, abilities, experience, and professional position. You can expect to make between INR 4-6 with two to three years of expertise in the field.

To know more about technician visit:-

https://brainly.com/question/19161047

#SPJ1

The statement "Before you can open and edit a compressed file, you need to zip it" is false because before you can open and edit a compressed file, you need to unzip it.

A compressed file is a file that has been reduced in size using compression software or algorithms, such as .zip or .rar. When a file is compressed, it is stored in a format that takes up less space, making it easier to store and transfer. However, to access the contents of a compressed file, you need to decompress or unzip it first, which expands the file back to its original size and format.

You can learn more about compressed file at

https://brainly.com/question/30055235

#SPJ11

Answer:

Claritas Prizm.

Explanation:

Use ChatGPT

The networking model that is based on peer-to-peer networking is the workgroup model.

In workgroup model, each device acts as both a client and a server, allowing direct communication between computers on the same network. The computers are not dependent on a centralized server and the workload can be shared among them.

This model can be used for both small-scale and large-scale networking. For example, it can be used in home networks, or it can be used in large corporate networks.

The workgroup model has some advantages over the client-server model. For example, it is less expensive to implement as it does not require a dedicated server and it is more reliable as it does not have a single point of failure. Additionally, it is easier to configure, maintain and upgrade.

Learn more about networking here:

https://brainly.com/question/29934433

#SPJ11

The incorrect statement from the given options is "abstract classes can have constructors."

In Java, an abstract class is a class that is declared abstract. The class cannot be instantiated, but it may be extended by subclassing. It can contain both concrete and abstract methods. It is useful for defining a standard template for concrete classes and defining common methods to be used by multiple subclasses. The abstract keyword is used to indicate that a class is abstract.

An interface is a collection of abstract methods. It is not a class and cannot be instantiated. It can be implemented by a class, which provides concrete implementations of all of its abstract methods. It is used to define a contract that a class implementing the interface must follow. The interface keyword is used to indicate that a class is an interface.

Abstract classes can have constructors. The purpose of an abstract class constructor is to initialize the instance variables that will be used by the subclass. A subclass must call the constructor of its superclass using the super keyword. An abstract class constructor can be either public or protected, but it cannot be private.Interfaces and ConstructorsInterfaces cannot have constructors. Thus the correct answer is abstract classes can have constructors.

For such more questions on abstract classes:

brainly.com/question/29602234

#SPJ11

The statement "Sticky keys enable you to press keyboard shortcuts one key at a time instead of simultaneously" is true becasue sticky keys is an accessibility feature in Windows that helps users who have difficulty holding down multiple keys at once.

When Sticky Keys is turned on, you can press keyboard shortcuts one key at a time instead of simultaneously. For example, if you want to use CTRL+ALT+DEL to open the Task Manager, you can press and release each key in sequence instead of holding them down together. This feature can make it easier for users with physical disabilities to use the keyboard and access certain functions on their computer.

You can learn more about keyboard shortcuts at

https://brainly.com/question/28959274

#SPJ11

The array will be declared, along with maybe a constant to denote the array's size. Do you have to keep track of how much of the array is being used right now?

To learn more about array, refer to:

https://brainly.com/question/28565733

A Generalized Linear Model (GLM) using the log link is a type of GLM that uses the natural logarithm to link the predicted probability of an outcome to the explanatory variables. The log link is not often used because the interpretation of the relative risk can be more difficult to interpret than the interpretation of a GLM with another link function.

Binary data is a type of data in which each observation can only have two possible outcomes (usually 0 or 1). It is often used to measure the relative risk associated with a particular explanatory variable, as it allows for the effects of the explanatory variable to be expressed in terms of the odds ratio (i.e., the ratio of the probability of one outcome to the probability of the other).

Additionally, the log link does not allow for an easy comparison of relative risk for different explanatory variables since it does not produce results in terms of the relative risk ratio.

You can learn more about Generalized Linear Model at: brainly.com/question/30584334

#SPJ11

True. According to the C++ language standard, public members of a class must be declared before any private members. This allows the compiler to check that any code attempting to access private members of a class is within the same class, or a friend class.

In C++, classes are user-defined data types that allow grouping related data and functions into a single unit. Public members of a class are accessible from outside the class, while private members are only accessible from within the class.

Therefore, by declaring public members first, the compiler can ensure that any code attempting to access private members of the class is within the same class or a friend class.

In Java, the statement "public members of a class must be declared before the private members" is false. Members can be declared in any order in a Java class.

In the Java language, accessibility modifiers are keywords used to specify the accessibility or scope of a class, method, or variable. Public, private, and protected are the three most commonly used accessibility modifiers in Java. Private members are only accessible within the class in which they are declared.

Public members are accessible throughout the project or application. Protected members are accessible only within the package or sub-classes. The ordering of the members of a Java class has no bearing on their accessibility.

The decision to declare a member as public, private, or protected should be based on the program's requirements. The accessibility of the member should be restricted to the narrowest possible scope in order to avoid unintended data manipulation or interference.

Java does not impose any limitations on the order in which members of a class are declared. As a result, there is no requirement that public members be declared before private members.

When a class is compiled, all of its members are compiled in the order they are listed in the file. It is also good coding practice to separate class members by scope, with private members listed first, followed by protected members, and then public members.

For more such questions on  C++

https://brainly.com/question/28959658

#SPJ11

Answer:

In order of operations, parentheses indicate that the operations inside should be done first before any other steps.

Explanation:

FIRST

Email usage has changed significantly over the past 20 years. In the early 2000s, email was largely used for personal communication, but with the advent of social media, it is now a key component of business communication. An anticipatory system is one that can proactively respond to emails in a timely manner, anticipating the needs of the recipient. Advances in hardware and software have changed the way we use email and the types of jobs available.

Hardware has allowed for greater speeds in sending and receiving emails, as well as increased storage capacity. The software has also enabled more efficient management of emails, with the ability to organize emails into folders and categories. These advances have resulted in new roles such as email marketers and email system administrators, as well as increased demand for certain skill sets such as HTML coding. In the future, email usage is likely to increase further as the use of AI in email becomes more widespread.

You can learn more about Email at: brainly.com/question/14380317

#SPJ11

Traits, skills, knowledge areas, or attributes that are required for successful job performance are commonly known as job competencies or simply competencies.

These competencies are the measurable or observable knowledge, skills, abilities, behaviors, and personal characteristics that are necessary for effective job performance in a particular role or occupation. Competencies may be general or specific, and they may vary depending on the industry, organization, or job role. Examples of competencies may include communication skills, problem-solving ability, technical knowledge, leadership, teamwork, adaptability, and customer service orientation.

Job performance refers to how an individual carries out their duties in their position of employment and involves an evaluation of their attendance, attitudes, effort, knowledge, behaviors, and abilities.

Learn more about job performance: https://brainly.com/question/30009653

#SPJ11

The following recursive method takes two strings str and forbidden as parameters, and removes all characters from the forbidden string from str. If the string str is empty, the method returns the empty string. Otherwise, the method checks if the first character of str is included in the string forbidden.

If it is, the method returns a new string which is a concatenation of the result of calling the method on the rest of str (all characters except the first one) and the rest of the forbidden string. Otherwise, the method returns a new string which is a concatenation of the first character of str, and the result of calling the method on the rest of str.

Here is the code:

String remove characters(String str, String forbidden)

{
 if (str.length() == 0) {
   return "";
 } else if (forbidden.contains(String.valueOf(str.charAt(0)))) {
   return remove characters(str.substring(1), forbidden);
 } else {
   return str.charAt(0) + remove characters(str.substring(1), forbidden);
 }
}

You can learn more about recursive method at: brainly.com/question/29238957

#SPJ11

The employment of robots to carry meal trays, make rounds, and collect vital signs is one example of how technology is influencing nursing practice and health care. Another example is the ability to personalize treatment strategies for malignant tumors based on the findings of genetic testing.

To learn more about vital signs, refer to:

https://brainly.com/question/970323

The statement "to avoid confusion, each component in the WBS needs to have a unique name and a unique number" is TRUE.

WBS stands for Work Breakdown Structure. It is a useful project management tool that helps to break down the project's work into smaller, more manageable components, making it easier to manage, monitor, and control. In WBS, each component must have a unique name and number to avoid confusion. Because it specifies the project's complete scope, a WBS aids in defining project objectives and establishing the project's critical path. A WBS also facilitates the project manager's communication with the project team and stakeholders, ensuring that everyone is aware of the project's progress.

Learn more about WBS here:

brainly.com/question/14530580

#SPJ11

If the memory register for a particular computer is 32 bits wide, then the maximum amount of memory that can be supported is 2^32 bits or 4 gigabytes (GB) of memory.

This is because a 32-bit register can represent 2^32 unique memory addresses, each of which can hold a single byte (8 bits) of data. So, the total amount of memory that can be addressed by a 32-bit register is 2^32 bytes, which is equivalent to 4 GB. Note that this assumes that the computer's architecture and operating system support a 32-bit memory address space.

The address conveyed to the memory unit is handled by the memory address register, and this may be done either by utilizing a bus technique (as we have done in our design) or by declaring the memory's direct input.

Learn more about memory register: https://brainly.com/question/12996770

#SPJ11

The Jerry Falwell Library provides access to a variety of sources, including books, scholarly articles, databases, e-books, media, and more. The example of the project is:

The library provides access to a wide range of scholarly journals and databases, which can be searched by topic, author, or keyword.The library has a large collection of e-books, which can be accessed online from any device. To locate sources for your inquiry project, you can use the library's search tools, which allow you to search across multiple sources at once.

Internet traffic entering, leaving, or moving within a private network is restricted by a firewall, a computer network security device. By selectively blocking or permitting data packets, this software, or dedicated hardware-software device, performs its purpose.

Learn more about databases: https://brainly.com/question/518894

#SPJ11

To assess the predictive power of a binary response model and evaluate its performance on data outside the estimation sample, Genie can use techniques such as cross-validation or out-of-sample testing.

In cross-validation, the data is randomly divided into training and testing subsets, and the model is trained on the training set and then tested on the testing set. This process is repeated multiple times with different subsets, and the average performance across all tests is used to assess the model's predictive power.

In out-of-sample testing, the model is tested on a separate dataset that was not used in the model's estimation. This allows Genie to evaluate how well the model generalizes to new data.

Read more about binary response model here:

https://brainly.com/question/30001667

#SPJ1

To set up a new iPhone like the old one, when you don't have access to the old phone, you can use the "Restore from iCloud Backup" feature.

Here are the steps to follow:

Step 1: Turn on your new iPhone and follow the prompts until you reach the "Apps & Data" screen.

Step 2: Tap "Restore from iCloud Backup" and sign in to your iCloud account with your Apple ID and password.

Step 3: Choose the most recent backup from the list of backups available to you. If you have an encrypted backup, you'll need to enter the password.

Step 4: Wait for the restore process to complete. This may take a while, depending on the size of your backup.

Step 5: Once the restore process is complete, your new iPhone will be set up like the old one. All your apps, photos, messages, and other data will be transferred to the new device.

Please note that you'll need to have access to a Wi-Fi network during the restore process, as it requires a stable and reliable internet connection.

Learn more about Restore from iCloud Backup here:

https://brainly.com/question/30732313

#SPJ11

Asking the customer whether the problem is intermittent or constant is part of the first step in the six-step troubleshooting process, which is to identify the problem.

The six steps of the troubleshooting process are:

Identify the problem: This step involves gathering information about the problem, such as its symptoms and when it occurs, in order to better understand and define the problem.

Establish a theory of probable cause: Based on the information gathered in step 1, this step involves developing a theory or hypothesis about the most likely cause of the problem.

Test the theory: In this step, the theory developed in step 2 is tested to determine whether it is correct.

Establish a plan of action and implement the solution: Based on the results of the testing in step 3, a plan of action is developed to implement the solution to the problem.

Verify full system functionality: Once the solution has been implemented, the system is tested to ensure that the problem has been resolved and that the system is functioning correctly.

Document the findings, actions, and outcomes: This step involves documenting the problem, the steps taken to troubleshoot and solve it, and the final outcome.

Therefore, asking the customer whether the problem is intermittent or constant falls under the first step of identifying the problem, which is a crucial step in the troubleshooting process as it helps to define the scope and nature of the problem.

Learn more about troubleshooting here brainly.com/question/30048504

#SPJ4

HTML Function to display the product of an argument times tenA function named timesTen should accept an argument and display the product of its argument * 10. is times_ten(5)

An example of a function named times_ten that multiplies its input argument by 10 and displays the result:

def times_ten(x):

   result = x * 10

   print(result)

This will output 50, which is the product of 5 and 10.

So, when you call times_ten(5), the function multiplies 5 by 10 to get 50, and then displays that value to the console. If you were to call times_ten(7), for example, the function would multiply 7 by 10 to get 70 and display that value to the console.

Learn more about  writing functions in Python:https://brainly.com/question/25755578

#SPJ11