Answer:
total potential energy is 383.18.
Explanation:
It is because that when we hold something at the influence of gravity than work is done . Similarly we know that
Potential Energy is Equal to the product of m g and h.Here weight gives the product of mass and acceleration due to gravity.so
PE = mgh
= 112.7×3.4
=383.18 joule
Unit of energy is joule
True or False question! ⬇⬇ Will give BRAINLIEST!
No matter the medium, light will always bend at the same angle when it passes from one medium to a different medium.
-True
-False
Answer:
the answer can be probably true since light can be refracted
The monster wants to make himself known to the family in the cottage in chapters 9-12 of Frankenstein. He decides he can't do that until he masters something. What skill
must he master?
A. How to dress properly
B. Language
C. The rules of etiquette
D. Music
Answer:
c
Explanation:
Two engines create SIL values of 75 dB and 85 dB respectively. What dB reading would you expect when both are run simultaneously?
Answer:
Explanation:
In a quiet forest, you can sometimes hear a single leaf fall to the ground. ... greater its pressure amplitude, the more the air is compressed in the sound it creates. ... Graphs of the gauge pressures in two sound waves of different intensities. ... The sound intensity level β in decibels of a sound having an intensity I in watts per .
A 30-g bullet traveling horizontally at 300 m/s strikes a 1.0-kg block which is attached to a horizontal spring with a force constant of 2000 N/m and rests on a frictionless horizontal surface. The spring is on the far side of the block and aligned with the direction of travel of the bullet. The bullet becomes embedded in the block and, as a result of the impact, and the block slides against the spring. How far is the spring compressed before it reverses its direction of travel
Answer:
Explanation:
Using law of conservation of momentum during collision , velocity after collision can be found .
common velocity V = m v / ( m + M )
= .030 x 300 / ( .030 + 1 )
V= 8.7378 m /s
The kinetic energy of the bullet and block will be stored as elastic energy
1/2 ( M + m ) V² = 1/2 k A² where k is force constant and A is maximum compression in the spring .
( M + m ) V² = k A²
1.030 x 8.7378² = 2000 x A²
A² = .0393
A= .1982 m .
= 19.82 cm
How far from the earth must a body be along a line toward the sun so that the sun’s
gravitational pull balances the earth’s? The sun is 9.3 × 107 miles away and its mass is
3.24 × 105 Me.
Answer:
r = 1.63×10^5 mi
Explanation:
Let r = distance of object from earth
Rs = distance between earth and sun
Ms = mass of the sun
= 3.24×10^5 Me (Me = mass of earth)
At a distance R from earth, the force Fs exerted by the sun on the object is equal to the force Fe exerted by the earth on the object. Using Newton's universal law of gravitation,
Fs = Fe
GmMs/(Rs - r)^2 = GmMe/r^2
This simplifies to
Ms/(Rs - r)^2 = Me/r^2
(3.24×10^5 Me)/(Rs - r)^2 = Me/r^2
Taking the reciprocal and then its square root, this simplifies further to
Rs - r = (569.2)r ----> Rs = 570.2r
or
r = Rs/570.2 = (9.3×10^7 mi)/570.2
= 1.63×10^5 mi
define area and give its SI unit
Answer:
area is the space bounded by certain lines, the SI unit of area is m²
area of rectangle =l×w×h
square=l²
Please need help ASAP, ASAP
If force is doubled, acceleration will also be doubled.
Newton’s second law of motion, unlike the first law of motion, pertains to the behaviour of objects for which all existing forces are unbalanced. The second law of motion is more quantitative and is used extensively to calculate what happens in situations involving a force.It states that: Force is equal to the rate of change of momentum. For a constant mass, force equals mass times acceleration.The acceleration of the body is directly proportional to the net force acting on the body and inversely proportional to the mass of the body. This means that as the force acting upon an object is increased, the acceleration of the object is increased.In this given question, force is doubled. We know that force is directly proportional to acceleration. As we increase the force on an object the acceleration increases proportionally. Therefore, if you double the force you double the acceleration.
To know more about force visit:
https://brainly.com/question/15486556
#SPJ1
What is the meaning of the density of states function?
Ans-The density of states function describes the number of states that are available in a system and is essential for determining the carrier concentrations and energy distributions of carriers within a semiconductor.
Answer:
density equal to mass upon volume
simple definition
The momentum of an object is determined to be 7.2×10-3 kg⋅m/s. Express this quantity as provided or use any equivalent unit. (Note: 1 kg = 1000 g
The mass of the moving item is referred to as momentum. There is magnitude and direction to momentum. The object has a momentum of 7.2 g-m/s.
What is the momentum of an object?Momentum is a vector quantity that is created during motion by an object's mass and velocity. Thus, momentum will be expressed in units of kg-m/s.
Considering that item has motion. Likewise, 1 kilogram equals 1000 g. Therefore, the momentum will transform into units of grams when we enter the value of 1 kg.
Momentum = 7.2 x 10⁻³ 1000g-m/s
Momentum = 7.2 g-m/s.
Thus, we may deduce that the object's momentum, measured in grams per second, is 7.2 g-m/s.
Learn more about momentum, here:
https://brainly.com/question/24030570
#SPJ1
A force F making an angle with the horizontal is acting on an object resting on the table. Which statement is true for the motion of sliding the object on the table? A. It is independent of all the forces acting on the object. B. It depends only on the forces acting along the x-axis. C. It depends only on the forces acting along the y-axis. D. It depends only on the normal force acting on the object. E. It depends only on the frictional force acting on the object.
Answer:
C
Explanation:
it depends only on the forces acting along the y- axis
Answer:
The statement that is true for the motion of sliding the object on the table is : its independent of all forces acting on the object
Explanation:
a mango fruit drop down from top of its tree which is 5m high. How long does it take to reach the ground
Answer:
What is the mass tho?
You need the mass to answer this question
Answer:
[tex]distance = ut + \frac{1}{2} g {t}^{2} \\since \: the \: fruit \: is \: from \: rest : \: initial \: velocity \: is \: 0 \: (u = 0) \\ 5 = (0 \times t) + ( \frac{1}{2} \times 9.81 \times {t}^{2} ) \\ 5 = 4.905 {t}^{2} \\ t = \sqrt{1.0194} \\ t = 1 \: second[/tex]
How important do you think temperature, radiation, and geologic activity are to the habitability in general?
Answer:
Explanation:
All 3 are critical for habitability
The planet Mars has a mass that is 0.11 times Earth’s mass and a radius that is
0.54 times Earth’s radius. a) How much would a 60.0-kg astronaut weigh if
she were to stand on the surface of Mars?
A coil of 27 turns is in the shape of an ellipse having a major axis of 12.0 cm and a minor axis of 9.00 cm. The coil rotates at 57rpm in a region in which the Earth's magnetic field is 74.0 microT. What is the maximum voltage induced in the coil if the axis of rotation of the coil is along its major axis and this axis of rotation is aligned perpendicular to the Earth's magnetic field
Answer:
Explanation:
Emf induced e = nBAω sinωt where n is no of turns , B is magnetic field, A is area of the coil ω is angular frequency of rotation .
maximum emf = nBAω
Given n = 27 , B = 74 x 10⁻⁶ T , A = .12 m x .09 m = 108 x 10⁻⁴ m²
ω = 2π x 57/60 = 5.966 rad/s .
Putting the values
maximum emf = 27 x 74 x 10⁻⁶ T x 108 x 10⁻⁴ m² x 5.966 rad/s .
= 1.29 x 10⁻⁴ V .
Net work W would accelerate an object from rest to velocity v. What net work is needed to accelerate the object from rest to velocity 2v?
The net work that is needed to accelerate a 2.0 kg mass from rest to velocity 2v is 4.0 m/s.
What is net work done?When a force acts on a body at rest or at uniform motion in a straight line, then it starts to accelerate.
Given that, the velocity is 5.0
Time is 2 sec
The given mass is 2.0 kg
First, we calculate the acceleration
Acceleration = v / t = 10 / 5.0 = 2
From Newton's second law, we know that
force = mass x acceleration
F = ma
F = 2.0 x 2 = 4.0 m/s
Therefore, the net work that is needed to accelerate a 2.0 kg mass from rest to velocity 2v is 4.0 m/s.
To learn more about net work done, refer to the link:
https://brainly.com/question/16805351
#SPJ1
The question is incomplete. Your most probably complete question is given below:
What net force is needed to accelerate a 2.0 kg mass from rest to a velocity of 10 m/s in 5.0 s?
True or False? 13. All living things are made of cells 14. All cells have DNA within their nucleus 15. The cell is the basic unit of life in all organisms 16. All cells in a living thing are similar in structure or function 17. Cells must develop from other cells
Answer:
1: True
2: False
3: True
4: False
5: True
A gas is placed in a 5.0-mL syringe. It exerts 141 mm Hg of pressure on the inside walls of the syringe. The syringe's plunger is pressed, reducing the volume of the syringe to 2.9 mL. The cap was not removed from the syringe, so none of the gas escapes. Assuming the temperature of the gas does not change, use Boyle's law (below) to determine the pressure of the compressed gas. P_1V_1 = P_2V_2
Answer: [tex]243.10\ mm\ \text{of}\ Hg[/tex]
Explanation:
Given
The initial volume of gas [tex]V_1=5\ ml[/tex]
Initial pressure is [tex]P_1=141\ mm\ \text{of}\ Hg[/tex]
Final volume is [tex]V_2=2.9\ ml[/tex]
As it is given [tex]P_1V_1=P_2V_2[/tex]
insert the values
[tex]141\times 5=P_2\cdot 2.9\\P_2=243.10\ mm\ \text{of}\ Hg[/tex]
When a body is accelerated under water, some of the surrounding water is also accelerated. This makes the body appear to have a larger mass than it actually has. For a sphere at rest this added mass is equal to the mass of one half of the displaced water. Calculate the force necessary to accelerate a 10 kg, 300-mm-diameter sphere which is at rest under water at the acceleration rate of 10 m/s2 in the horizontal direction. Use H2O
Solution :
Mass of the sphere, m = 10 kg
Diameter, D = 300 mm = 0.3 m
Volume of the sphere is [tex]$V=\frac{4}{3} \pi \left(\frac{0.3}{2}\right)^3$[/tex]
[tex]$V=0.01414 \ m^3$[/tex]
So the volume of displaced water, [tex]$V_w=V = 0.01414 \ m^3$[/tex]
Additional mass, [tex]$m_w = \frac{1}{2} \ \rho_w\times v_w$[/tex]
[tex]$=\frac{1}{2} \times 1000 \times 0.01414$[/tex]
[tex]$=7.0686 \ kg$[/tex]
So the total mass, [tex]$M = m_w+m$[/tex]
= 7.0686 + 10
= 17.0686
Force required, F = Ma
[tex]$F=17.0686 \times 10$[/tex]
= 170.686 N
The force that is necessary to accelerate when the acceleration rate of 10 m/s2 in the horizontal direction should be 170.686 N.
How to calculate the force?Since Mass of the sphere, m = 10 kg
Diameter, D = 300 mm = 0.3 m
Now volume of the sphere is
V = 4/π (diameter/3)^3
V = 4/3π(0.3/2)^3
= 0.01414m^3
Now the additional mass is
= 1/2* 1000 * volume
= 1/2 *1000*0.01414
= 7.0686
So, the total mass is
= Additional mass + force
= 7.0686 + 10
= 17.0686
Now the force is
= 17.0686 * 10
= 170.686
Hence, The force that is necessary to accelerate when the acceleration rate of 10 m/s2 in the horizontal direction should be 170.686 N.
Learn more about acceleration here: https://brainly.com/question/18555689
Sound is not so distinct at day due to............
Explanation:
This is because of a phenomenon called refraction which effects the direction of sound.
What are the horizontal and vertical components of a cat's displacement when the cat has climbed 5 m
directly up a tree © = 90°? Sin90=1
cos90=0
The horizontal component of the cat's displacement, Dx = 0 m
The vertical component of the cat's displacement, Dy = 12 m
What are the horizontal and vertical components of a vector?The horizontal component of a vector is the value of that vector acting in the horizontal direction.
The horizontal component of a vector is given as Dx.
Dx = Dcosθ
where;
D is the resultant of the vector
θ is the angle of the vector from the horizontal
The horizontal component of the cat's displacement is:
Dx = 12 * 0
Dx = 0 m
The vertical component of a vector is the value of that vector acting in the vertical direction.
The vertical component of a vector is given as Dy.
Dy = Dsinθ
where;
D is the resultant of the vector
θ is the angle of the vector from the horizontal
The vertical component of the cat's displacement is:
Dy = 12 * 1
Dy = 12 m
Learn more about horizontal and vertical components at: https://brainly.com/question/26446720
#SPJ1
In velocity time graph of a body, two points are given as A(40,5) and B(20,2). What is the acceleration of the body
Answer:
0.15 m/s²
Explanation:
Acceleration is rate of change of velocity-time function. We can find acceleration by finding the slope. The slope of graph can be found by:
[tex] \displaystyle{a = \dfrac{ \Delta v}{ \Delta t} \: \to \: \dfrac{v_f - v_i}{t_f- t_i}}[/tex]
Substitute in:
[tex] \displaystyle{a = \dfrac{5 - 2}{40 - 20}} \\ \\ \displaystyle{a = \dfrac{3}{20}} \\ \\ \displaystyle{a = 0.15 \: \text{m/s}^{2} }[/tex]
Therefore, the acceleration is 0.15 m/s²
4. How many excess electrons does a balloon that was rubbed on a child's hair and
now has a charge of 4.0 x 107 Coulombs?
A satellite is a large distance from a planet, and the gravitational force from the planet is the only significant force exerted on the satellite. The satellite begins falling toward the planet, eventually colliding with the surface of the planet. As the satellite falls, what claims is correct about how the force that the planet exerts on the satellite Fps changes and how the force that the satellite exerts on the planet Fsp changes, if at all? What reasoning supports this claim?
Answer:
The answer is "Option A".
Explanation:
Please find the complete question in the attached file.
The strength is equal due to the third law of Newton, and [tex]Fsp = Fps = \frac{Gmsmp}{r^2}\[/tex], therefore the force increases with decreased separation r.
Three point charges q1 = +2 μC, q2 = −3 μC, and q3 = +4 μC are located at the corners of a right angle triangle as shown below. Find the magnitude and direction of the resultant force on q3.
Answer:
Explanation:
4
The magnitude and direction of the resultant force on q3 is;
F_net = 32.2 N in the direction of q3
We are given;
q1 = +2 μC = 2 × 10^(-6) C
q2 = -3 μC = -3 × 10^(-6) C
q3 = +4 μC = 4 × 10^(-6) C
Now,from the given image, charges q1 and q2 attract charge q3.
Formula for force on a charge is;
F = (kq1 * q2)/r²
Where;
k = 9 × 10^(9) N.m²/C²
Thus;
F_y = kq1*q3/(r1)²
We have;
q1 = 2 × 10^(-6) C
r1 = 5 cm = 0.05 m
q3 = 4 × 10^(-6) C
Thus;
F_y = (9 × 10^(9) × 2 × 10^(-6) × 4 × 10^(-6))/(0.05^(2))
F_y = 28.8 N
Similarly;
F_x = kq2*q3/(r2)²
r2 = 5/(tan 30)
r2 = 8.66 cm = 0.0866 m
F_x = (9 × 10^(9) × -3 × 10^(-6) × 4 × 10^(-6))/(0.0866^(2))
F_x = -14.4 N
Thus, magnitude of resultant force is;
F_net = √((28.8)² + (-14.4)²)
F_net = √1,036.8
F_net = 32.2 N
Read more at; https://brainly.com/question/16796365
A single movable pulley is used to lift 4000N load to the height of 50 cm. If the efficiency of the pulley is 75%, Calculate effort distance,effort applied,output work and mechanical advantage.
Since the efficiency of the pulley is 75% and the single movable pulley is used to lift 4000N load to the height of 50 cm, the effort distance, effort applied, output work and mechanical advantage are as follows:
Effort Distance = 50 cm
Effort Applied = 5333.33 N
Output work = 2000 J
Mechanical Advantage = 0.75.
When a single movable pulley is used to lift a load, the effort applied is equal to the weight of the load being lifted, and the effort distance is the distance the effort is applied.
Load (output force) = 4000 N
Height lifted = 50 cm = 0.5 m
Efficiency of the pulley = 75%
Given the above information, we can calculate the effort applied, output work, and mechanical advantage as follows:
Effort applied (input force) = Load ÷ Efficiency
= 4000 N ÷ 0.75
= 5333.33 N
Output work = Load x Height lifted
= 4000 N x 0.5 m
= 2000 J
Effort distance = Height lifted
= 50 cm
Mechanical advantage = Load ÷ Effort applied
= 4000 N ÷ 5333.33 N
= 0.75
It is worth noting that pulley efficiency is the ratio of output work to the input work. And since the efficiency of the pulley is 75% so the input work is greater than the output work, which means some of the energy is wasted in overcoming friction and other losses.
Learn more about pulley:
https://brainly.com/question/25855047
how to prepare a trading stock account
Answer:
Opening stock details of raw material, semi-finished goods and finished goods.
Closing stock details of raw material, semi-finished goods, and finished goods.
Total purchases of goods fewer Purchase Returns.
Total sales of goods fewer Sales Returns.
state the property of plastic that allows it to become electrostatically charged
(please answers ty)
Answer:
when a plastic rod is rubbed with a duster, electrons are transferred from one material to the other. The material that gains electrons becomes negatively charged. The material that loses electrons becomes positively charged.
A wave is traveling at a speed of 12m/s and its wavelength is 3 m calculate the wave frequency
Answer:
f = 4 Hz
Explanation:
Given that,
The speed of a wave, v = 12 m/s
The wavelength of a wave, [tex]\lambda=3\ m[/tex]
We need to find the frequency of the wave. We know that the speed of wave is equal to the product of wavelength and frequency. So,
[tex]v=f\lambda\\\\f=\dfrac{v}{\lambda}\\\\f=\dfrac{12}{3}\\\\f=4\ Hz[/tex]
So, the frequency of the wave is equal to 4 Hz.
Which of the following correctly describes the order of skin layers from the inside to the outside of the body?
A. dermis, epidermis, hypodermis
B. hypodermis, dermis, epidermis
C. epidermis, hypodermis, dermis
D. hypodermis, epidermis, dermis
Answer:
it is a
Explanation:
dermis,epidermis,hypodermis
Answer:
B. hypodermis, dermis, epidermis
this is because it is inside to outside
hypodermis is deeper tissue, dermis is beneath epidermis, and epidermis is the outermost layer
Describe the image with a object distance of 65cm and a focal length of 20cm
Answer:
Imag distance = 28.9 cm
Explanation:
Given that,
Object distance, u = -65 cm
The focal length of the convex les, f = +20 cm
We need to find the image distance. The lens formula gives the relation between focal length, object distance and image distance is given by :
[tex]\dfrac{1}{f}=\dfrac{1}{v}-\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{f}+\dfrac{1}{u}\\\\\dfrac{1}{v}=\dfrac{1}{20}+\dfrac{1}{-65}\\\\v=28.9\ cm[/tex]
So, the image distance is 28.9 cm