How many moles of Mg are needed to react with 20 mol O2?

no I will not please put you because that's the god of the Bible

Metals are good conductors of heat and electricity, and are malleable (they can be hammered into sheets) and ductile (they can be drawn into wire).

Nonmetals are (usually) poor conductors of heat and electricity, and are not malleable or ductile; many of the elemental nonmetals are gases at room temperature, while others are liquids and others are solids. 

The metalloids are intermediate in their properties.  In their physical properties, they are more like the nonmetals, but under certain circumstances, several of them can be made to conduct electricity.

hope this answer helped u, if u can pls mark me as the brainliest. :)

Answer:

more heat

Explanation:

more heat bro , more heat

Explanation:

The answer is given in the question

Answer:

law of conservation of energy

Answer:

4-methyloctane

Explanation:

other guy got it wrong, this one's right

The  name of the branched alkane is 4-methyloctane as it has 8 carbon atoms.

An atom is defined as the smallest pa of matter which makes a basis of an element. Every form of matter whether it be a  solid,liquid , gas consists of atoms . Each atom has a nucleus which is contains protons and neutrons and shells in which the electrons revolve.

The protons are positively charged  particles and neutrons are neutral particles and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged particles  and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not  change the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/29695801

#SPJ7

Answer:

Correct option is

C

Ag

2

CO

3

; K

sp

=6.2×10

−12

(A) For CaCO

3

,S=

Ksp

=

8.7×10

−9

=9.3×10

−5

M

(B) For CuS,S=

Ksp

=

8.5×10

−45

=9.2×10

−23

M

(C) For Ag

2

CO

3

,S=(Ksp/4)

1/3

=(6.2×10

−12

/4)

1/3

=1.15×10

−4

M

(D) For Pb(IO

3

)

2

,S=(Ksp/4)

1/3

=(2.6×10

−13

/4)

1/3

=4×10

−5

M

Hence, Ag

2

CO

3

has the greatest molar solubility in pure water.

Answer: It is either C. or D.

Explanation: I did some reading about it and it talks about fuel but I know that it didn’t say all of them are used as fuels.  maybe I’m wrong

Petroleum is composed of hydrocarbons of various chain length. Different products can be extracted from petroleum but all products cannot be used as fuel.

Hydrocarbons in diesel have higher boiling point than that of gasoline.

Petroleum is a naturally occurring crude liquid mixture of hydrocarbons. Petroleum can be fractionated to different components such as gasoline, kerosene, diesel etc.

Each fraction vary in the number of carbons and hydrogens in it or called the difference in chain length. Kerosene contains 8-16 carbons where as gasoline and diesel have more carbons.

Not all products of petroleum fractionation can be used as fuel. Some of them with effective quality is taken as fuels.

The boiling point of hydrocarbons in diesel is greater (about 130-380 degree Celsius) than the hydrocarbons in gasoline which is having boiling point in he range 30-225 degree Celsius.

Therefore, the statement C is correct.

To learn more about petroleum, find the link below:

https://brainly.com/question/4147953

#SPJ5

Answer:

447.64 grams

Explanation:

To find the mass when given moles, it is a pretty simple process.

I start by finding the molar mass of chloric acid, which comes out to 84.46 grams/mol. To find the MM (molar mass), you just take the mass of each element in the molecule from the periodic table and add them all together.

After this, you set up the equation by taking the moles given and multiplying it by the molar mass. This gives you the new value in grams (since we cancelled out the moles). I have attached my work below.

I hope this helps! :^)

The mass of 5.3 moles chloric acid has been 447.85 g.

The mass of 1 mole of a compound has been equivalent to the molar mass of the compound. The molar mass of a compound has been the sum of the constituent atoms in a formula unit.

The molar mass (mwt) of chloric acid has been given as:

[tex]mwt=m_H\;+\;m_C_l\;+\;(m_O\;\times\;3)[/tex]

By substituting the values for the mass of constituent atoms, the molar mass has been given as:

[tex]mwt=1\;+\;35.5\;+\;16\;\times\;3\\mwt=36.5\;+\;48\\mwt=84.5[/tex]

The molar mass of chloric acid has been 84.5 g/mol.

The mass of 1 mole of chloric acid has been 84.5 g/mol. The mass of 5.3 moles chloric acid has been:

[tex]\rm 1\;mol=84.5\;g\\5.3\;mol=5.3\;\times\;84.5\;g\\5.3\;mol=447.85\;g[/tex]

The mass of 5.3 moles chloric acid has been 447.85 g.

For more information about molar mass, refer to the link:

https://brainly.com/question/12127540

will share 2 elctrons with 2 Cl to form

S in column 16 WILL SHARE 2 ELECTRONS WITH 2 /Cl to form

SCl2

,

Answer:

a. carbon    CCl4

b. nitrogen NCl3

c. aluminum AlCl3  

d. sulfur SCl2

Explanation:

10. Based on their valence electrons, how many

atoms of chlorine are expected to bond

with each of the following elements?

a. carbon    CCl4

b. nitrogen NCl3

c. aluminum AlCl3  

d. sulfur SCl2

Cl is in Periodic Table column 17, so it has 7 valence  and needs 1 more to have an electronic structure like its nearest noble gas, Ar.

It then has an oxidation state 0f -1.

Carbon in column  has  +/-4 charge, so 4 Cl will bond with 1 C to make

covalent CCl4

Nitrogen in column 15  is -3.  It will share 3 electrons with 3 Cl to form

covalent NCl3

Al in column 13 give away 3 electrons to 3 Cl to form

ionic AlCl3

S in column 16 will share 2 electrons with 2 Cl and frorm

SCl2

Answer:

methane and petrol okkkkkkkkkkkkkkkkkkk

Answer:

The answer for number one is .A

The answer for number two is heat rises

Explanation:

Answer:

It is most likely to be an asteroid

Answer:

6.02 × 1023

The molar mass from the periodic table is 32.00 g O2 = 1 mol O2, and by definition, 1 mol O2 = 6.02 × 1023 molecules O2.

Answer: adduction of the arm

lateral rotation of the arm

Explanation:

Answer:

Westerlies are prevailing winds that blow from the west at midlatitudes. They are fed by polar easterlies and winds from the high-pressure horse latitudes, which sandwich them on either side.Nov 15, C answer

Answer:

see explanation

Explanation:

Given 0.100M NaOH + 50ml 0.100M HCl

If 50ml of 0.100M NaOH is added to 50ml 0.100M HCl => pH = 7

if less than 50ml of 0.100M NaOH => pH < 7

if more than 50ml of 0.100M NaOH => pH > 7.

Example:

50ml(0.100M NaOH) + 50ml(0.100MHCl) =>

      0.500mole NaCl + 0.500mole H₂O

In this mix, both NaOH and HCl are converted to NaCl and H₂O and NaOH or HCl are no longer present giving a neutral solution. Since neither Na⁺ nor Cl⁻ undergo hydrolysis, the pH is dependent upon H₂O ⇄ H⁺ + OH⁻ and [H⁺] = [OH⁻] = 10⁻⁷M => pH = -log[H⁺] = -log(10⁻⁷) = -(-7) = 7

If less than 50ml of 0.100M NaOH is added, the mix will have an excess of HCl and the pH will be acidic; i.e., less than 7.

If more than 50ml of 0.100M NaOH is added, the mix will have an excess of NaOH and the pH will be alkaline (basic); i.e., greater than 7.

Answer:

2.4 M

Explanation:

1. Suppose you have 100 mL solution:

Use density to find grams of solution:

100 mL solution x (1.10 g / 1 mL) = 110 g solution

2. FInd the amount of sodium chloride pure:

110 g solution x(13 g NaCl / 100 g solution) = 14.3 g NaCl

3. Change grams to mol:

14.3 g NaCl x ( 1 mol NaCl/ 58.44 g NaCl) = 0.24 mol NaCl

4. Molarity:

M = mol NaCl / L solution

M = 0.24 mol NaCl / 0.1 L = 2.4 M

Answer:

Aluminium ions present's in 65.5mL of 0.210

M All 3solution is Given below-:

Answer and Explanation: 1

The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.

65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+65.5 mL×1 L1000 mL×0.210 mol AlF31 L×1 mol Al3+1 mol AlF3=0.013755 mol Al3+

To calculate for the number of aluminum ions, we use Avogadro's number as shown.

0.013755 mol Al3+×6.022×1023 ions1 mol Al3+=8.28×1021 ions Al3+.

Itz the ans. of collage ok man.

Answer:

m0.013755

m

o

l

A

l

3

+

×

6.022

×

10

23

i

o

n

s

1

m

o

l

A

l

3

+

=

8.28

×

10

21

i

o

n

s

A

l

3

+

L

×

1

L

1000

m

L

×

0.210

m

o

l

A

l

F

3

1

L

×

1

m

o

l

A

l

3

+

1

Explanation:

The first step is to determine the moles of aluminum ions. This utilizes the volume, molar concentration, and subscripts from the chemical formula of aluminum (III) fluoride as shown.

65.5. To calculate for the number of aluminum ions, we use Avogadro's number as shown.

Answer:

Suspension

Explanation:

It's a suspension because it is not mixed at all, and has distinctly separate layers.

Answer:

barium chloride (BaCl2) is added to sodium carbonate (Na2CO3). The result is a white precipitate.

Explanation:

Answer:

How many grams Iron(II) Sulfide in 1 mol? The answer is 87.91. We assume you are converting between grams Iron(II) Sulfide and mole. You can view more details on each measurement unit: molecular weight of Iron(II) Sulfide or mol The molecular formula for Iron(II) Sulfide is FeS. The SI base unit for amount of substance is the mole.

Explanation:

Answer:

The dipole forces (particularly H-bonds) that keep polar solute molecules together can be replaced by polar solute-solvent interactions, so substances that are predominantly polar (like glucose) dissolve in polar solvents like water but not in nonpolar solvents like hexane (H-bonds).

Explanation:

For a weak intermolecular bond, both the melting point and boiling point are lower.

A lesser energy is required to break bond of weak intermolecular forces while a greater energy is required to break bond of strong intermolecular forces.

E ∝ T

where;

A lesser energy means a lower temperature and a lower temperature will result in lower boiling point and melting point.

Thus, we can conclude that for a weak intermolecular bond, both the melting point and boiling point are lower.

Learn more here:https://brainly.com/question/14719148

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Let's consider the following neutralization reaction.

HCOOH + NaOH ⇒ HCOONa + H₂O

At the equivalence point, 0.25 M HCOOH completely reacted with 0.25 M NaOH to form 0.25 M HCOONa.

HCOONa undergoes hydrolysis. The net ionic equation is:

HCOO⁻(aq) + H₂O(l) ⇄ HCOOH(aq) + OH⁻(aq)

Given the concentration of HCOO⁻ is 0.25 M (Cb) and the basic dissociation constant of HCOO⁻ is 4.8 × 10⁻¹¹ (Kb), we can calculate the concentration of OH⁻ using the following expression.

[tex][OH^{-} ] = \sqrt{Kb \times Cb } = \sqrt{(4.8 \times 10^{-11} ) \times 0.25 } = 3.5 \times 10^{-6} M[/tex]

The pOH of the solution is:

[tex]pOH = -log [OH^{-} ] = -log (3.5 \times 10^{-6} ) = 5.5[/tex]

The pH of the solution is:

[tex]pH = 14 -pOH = 14 -5.5 = 8.5[/tex]

The pH at the equivalence point for the titration of 0.25 M HCOOH versus 0.25 M NaOH is 8.5.

Learn more: https://brainly.com/question/2728613

Answer:

Melting

Explanation:

Ice begins to melt at 0 degrees celsius

Melting is from solid to liquid

Freezing is from liquid to solid

Sublimation is from solid to gas

Deposition is from gas to solid

Answer:

C8H12

Explanation:

First find the molar mass

195/1.8 × 1 = 108.3 gmol-1

Then the molecular formula

Mass of C in 1 mole of compound = 88.82×108.3/100

= 96.2 g

Mass of H in 1 mol of.the compound = 108.3×11.18/100 = 12.11 g

Divide the mass by their molar masses to get no. of moles in 108.3 g of compound or 1 mole of compound

Moles of C in one Mole of compound = 96.2g/12 gmol-1 = 8 mol

Moles of H in 1 mole of compound = 12.11g/1 gmol-1 =12 mol

Since we need the molecular formula it's C8H12

Answer:

it is an endothermic reaction because the system takes energy from the surrounding.

Answer:

It is an endothermic reaction because the system takes energy from the surroundings.

Explanation:

I did the test.

Numer of moles of Li₂CO₃:

[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{(6 \times 2) + 12 + (16 \times 3)}[/tex]

[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{12+ 12 +48}[/tex]

[tex]\longrightarrow\: n_{(Li_2 CO_3)} = \dfrac{38.5}{72}[/tex]

[tex]\longrightarrow\: n_{(Li_2 CO_3)} = 0.53473 \: mol[/tex]

Chemical Reaction:

2 LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)

Therefore, applying unitary method:

No. of moles of lithium hydroxide would be required to produce 38.5 g of Li₂CO₃ in the following chemical reaction are 1.03.

Avogadro's number is the number of units in one mole of any substance and equals to 6.02214076 × 10²³. The units can be electrons, atoms, ions, or molecules.

No. of moles is defined as a particular no. of particles that we can calculate with the help of Avogadro’s number.

Mass of a particular product is also find out by stoichiometry of a reaction as per the no. of mole given in the reaction.

Given,

2LiOH(s) + CO₂(g) → Li₂CO₃(s) + H₂O(l)

2 moles of LiOH are required to produce 73.8g Li₂CO₃

0.027 moles of LiOH are required to produce 1g Li₂CO₃

1.03 moles of LiOH are required to produce 38.5 Li₂CO₃

Therefore, No. of moles of lithium hydroxide would be required to produce 38.5 g of Li₂CO₃ in the following chemical reaction are 1.03.

Learn more about mole concept, here:

https://brainly.com/question/31123980

#SPJ2

Answer:

Firstly, try to Go through your chapter and pay attention to main keywords.

secondly try to watch 'Uube' videos related to specific topic instead of chapter and pay attention to it closely and watch it with a keen interest.

Discuss topics that you find harder with your friends or peer group members, Because you learn faster when you study with the people of your age.

Answer:

i think the best way to learn chemistry is study over things that involve it

Explanation:

Answer:

12.34

Explanation:

because this is how we do this