There are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
The chemical formula of hydrogen bromide is HBr. A mole is a unit of measurement that expresses the amount of a chemical substance that includes a fixed number of units of that substance. One mole of a substance is equal to the Avogadro number or 6.022 x 10²³ of that substance.In this problem, we need to figure out how many moles are in 6.4 x 10²⁴ molecules of HBr. We'll start by using Avogadro's number to convert the number of molecules to moles.
According to Avogadro's number, 6.022 x 10²³ molecules are in one mole.
Therefore, to figure out how many moles there are in 6.4 x 10²⁴ molecules,
we will use the following formula:
moles = number of molecules ÷ Avogadro's numbermoles = 6.4 x 10²⁴ ÷ (6.022 x 10²³)moles = 1.06 moles
So, there are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
For more such questions on hydrogen bromide, click on:
https://brainly.com/question/20460954
#SPJ11
what is the name of the material that resists oxidation at elevated temperatures so air can be used as a plasma gas?
The material that resists oxidation at elevated temperatures so air can be used as a plasma gas is stain steel.
Stаinless steels аre most commonly used for their corrosion resistаnce. The second most common reаson stаinless steels аre used is for their high temperаture properties; stаinless steels cаn be found in аpplicаtions where high temperаture oxidаtion resistаnce is necessаry, аnd in other аpplicаtions where high temperаture strength is required.
The high chromium content which is so beneficiаl to the wet corrosion resistаnce of stаinless steels is аlso highly beneficiаl to their high temperаture strength аnd resistаnce to scаling аt elevаted temperаtures.
For more information about stаinless steels refers to the link: https://brainly.com/question/13292254
#SPJ11
calculate the volume in ml of a 6 m solution of hcl stock solution required to make 250 ml of 50 mm hcl?
The volume in ml of a 6 m solution of hcl stock solution required to make 250 ml of 50 mm hcl is: 20.8 ml.
To calculate the volume of a 6 M HCl stock solution required to make 250 ml of 50 mM HCl, use the following equation:
volume of stock solution (ml) = (desired concentration (mM) x volume of desired solution (ml)) / stock solution concentration (M).
Therefore, in this case, volume of stock solution (ml) = (50 mM x 250 ml) / 6 M = 20.8 ml. In other words, 20.8 ml of a 6 M HCl stock solution is required to make 250 ml of 50 mM HCl. This is because the number of moles (the amount of HCl molecules) in the solution must remain constant.
Increasing the volume of the solution by dilution means that the concentration (the amount of HCl molecules per ml of solution) must be decreased, and thus the amount of HCl stock solution must be increased.
To know more about HCl refer here:
https://brainly.com/question/30233723#
#SPJ11
in the cold pack process, 27 kj are absorbed from the environment per mole of ammonium nitrate consumed. if 25.0 g of ammonium nitrate are consumed, what is the total heat absorbed?
0.34 kJ of heat are absorbed in total.
Chemically, ammonium nitrate has the following formula: [tex]NH_4NO_3[/tex]. It is a salt comprised of ammonium and nitrate ions that is white and crystalline. It is a solid that is extremely hygroscopic and highly soluble in water despite without generating hydrates.
The first step is to calculate the amount of moles of ammonium nitrate consumed. This can be done using the molar mass of ammonium nitrate:
Molar mass of ammonium nitrate = [tex](1 mol NH_4NO_3) * (80.04 g/mol NH_4NO_3) = 80.04 g/mol NH_4NO_3[/tex]
Number of moles of ammonium nitrate consumed
[tex]\frac{(25.0 g NH_4NO_3)}{ (80.04 g/mol NH_4NO_3) }\\\\= 0.3125 mol NH_4NO_3[/tex]
The sum of the heat absorbed per mole of ammonium nitrate and the moles of ammonium nitrate consumed represents the total heat absorbed.
Total heat absorbed =[tex](27 kJ/mol NH_4NO_3) * (0.3125 mol NH_4NO_3) = 0.34 kJ[/tex]
Therefore, the total heat absorbed is 0.34 kJ
learn more about ammonium nitrate Refer:brainly.com/question/13005973
#SPJ1
predict the retention order for the following combinations of mobile and stationary phases: a. a polar stationary phase/nonpolar mobile phase?
The retention order for a polar stationary phase/nonpolar mobile phase is as follows: Nonpolar compounds will be eluted first, followed by polar compounds. This is due to the higher affinity of the nonpolar compounds for the stationary phase.
To predict the retention order for the given combinations of mobile and stationary phases for the polar stationary phase/nonpolar mobile phase, we need to understand what a retention factor is. In this case, the polarity of the stationary and mobile phases is the key to understanding the retention order.
Analyzing the polar stationary phase/nonpolar mobile phase, The retention factor, k, is defined as the ratio of the concentration of a compound in the stationary phase to its concentration in the mobile phase. It is the retention time of the compound divided by the elution time of the mobile phase.
A polar stationary phase interacts more strongly with polar compounds, while a nonpolar mobile phase interacts more strongly with nonpolar compounds. The retention order depends on the nature of the solutes and the nature of the mobile and stationary phases.
In general, nonpolar solutes have a greater retention factor in nonpolar mobile phases and polar solutes have a greater retention factor in polar mobile phases. So, for a polar stationary phase/nonpolar mobile phase, nonpolar compounds will elute first, followed by polar compounds.
Hence, the retention order for the given combinations of mobile and stationary phases is Nonpolar compounds > Polar compounds.
To know more about nonpolar compounds, refer here:
https://brainly.com/question/19458442
#SPJ11
which of the methods below can be used to prevent the oxidation of an iron object? 1) painting the object 2) attaching a sacrificial electrode made of zinc 3) submerging the object in water
One method for preventing oxidation of the object is painting it with iron material.
How can iron objects be kept from rusting?Oiling, painting, or lubricating By applying oil, grease, or paint, the surface is provided a waterproof coating that keeps moisture and oxygen from coming into direct contact with the iron item. Hence, rusting is prevented.
What kind of paint is applied to iron?Oil-based metal paints are the best choice for outside work, according to paint manufactured with oil. Very durable and frequently easier to remove is oil paint. Primer is not necessary when using an oil-based product, although it will produce a smoother finish. Oil-based paints are often more costly.
To know more about oxidation visit:-
https://brainly.com/question/9496279
#SPJ1
if a reaction is 1st order, how many half-lives are required for 99.9% of the original sample to be consumed?
In a first-order reaction, time required for completion of 99.9% is 10 times of half-life (t1/2) of the reaction.
In a first-order reaction, the rate of the reaction is inversely correlated with the concentration of the reactant. In other words, if the concentration doubles, so does the pace of the reaction. The half-life of a reaction is defined as the amount of time it takes for half of the reactant to be consumed. The half-life of a first-order reaction is given by:
t1/2 = 0.693/k
where k is the rate constant of the reaction.
The chemical kinetics rate law, which connects the molar concentration of reactants to reaction rate, uses the rate constant as a proportionality factor. The letter k in an equation designates it, which is also referred to as the reaction rate constant or reaction rate coefficient.
To know more about the half-life, refer:
https://brainly.com/question/14936355
#SPJ4
What pressure is required to reduce 50 mL of a gas at standard conditions to 20 mL at a temperature of 23◦C?
Answer in units of atm.
The pressure required to reduce 50 mL of a gas at standard conditions to 20 mL at a temperature of 23 °C is 10.656 atm. To solve this problem, the ideal gas law is used.
What is the ideal gas law?The ideal gas law is a fundamental equation of state that relates the pressure, volume, temperature, and number of moles of an ideal gas. The ideal gas law is expressed mathematically as:
PV = nRT
At standard conditions (STP), the volume of 50 mL of a gas is equivalent to 0.050 L, and the temperature is 273 K. We can use this information to find the initial number of moles of the gas:
n₁ = P*V₁/R*T₁= P(0.050 L)/(0.08206 L·atm/mol·K)(273 K) = P/2.4844
where V₁ = 0.050 L, R = 0.08206 L·atm/mol·K, and T₁ = 273 K.
To reduce the volume to 20 mL (0.020 L) at a temperature of 23°C (296 K), we can rearrange the ideal gas law equation and solve for the required pressure:
P2 = n₁*RT₂/V₂ = (P/2.4844)(0.08206 L·atm/mol·K)(296 K)/(0.020 L) = 10.656P
where T₂ = 296 K and V₂ = 0.020 L.
Therefore, the pressure required to reduce 50 mL of a gas at standard conditions to 20 mL at a temperature of 23°C is:
P₂ = 1 atm × 10.656 = 10.656 atm
Thus, the pressure required to reduce the volume of the gas is 10.656 atm.
To know more about the ideal gas law, visit:
https://brainly.com/question/28257995
#SPJ1
Question at position 1
What is the pressure of gas if 2. 89-g of CO2 sublimates in a 9. 60-L container at 255. 22K
The pressure of the gas in the container if 2. 89-g of CO2 sublimates in a 9. 60-L container at 255. 22K is 0.1431 atm. This is calculated using ideal gas equation.
Mass of solid CO2 = 2.89 gm
Volume of container, V = 9.60 L
Temperature, T = 255.22 K
We can calculate the number of moles of CO2 using the expression,
No. of moles = mass / molar mass
Molar mass of CO2 is 44.01g/ mole.
No. of moles, n =2.89 g / 44.01 g/mole
= 0.0656 mole
We can use here the ideal gas equation,
PV = n RT
we have the value of the R constant which is [0.08206 L. atm. K-1 mol-1]
P = n RT / V
P = 0.0656 mole x 0.08206 L. atm. K-1 mol-1 x 255.22 K / 9.60 L
= 0.1431 atm.
So the pressure of the gas in the container is 0.1431 atm.
To learn more about Ideal gas equation
https://brainly.com/question/27870704
#SPJ4
calculate the most probable speed, average speed, and rms speed for oxygen (o2) molecules at room temperature
At ambient temperature, O₂ molecules move at speeds ranging from 484 to 517 m/s, with 482 m/s being the RMS speed. This is the speed that is most likely to occur.
To calculate the most probable speed, average speed, and root mean square (RMS) speed for oxygen (O₂) molecules at room temperature, we can use the following equations:
Most probable speed:
vp = (2kT / πm)¹/²
where vp is the most probable speed, k is Boltzmann's constant (1.38 x 10⁻²³ J/K), T is the temperature in Kelvin (298 K for room temperature), and m is the mass of a single O2 molecule (32 g/mol or 5.31 x 10⁻²⁶ kg).
Plugging in the values, we get:
vp = (2 x 1.38 x 10⁻²³ J/K x 298 K / π x 5.31 x 10⁻²⁶ kg)¹/²
vp = 484 m/s
vavg = (8kT / πm)¹/²
where vavg is the average speed.
Plugging in the values, we get:
vavg = (8 x 1.38 x 10⁻²³ J/K x 298 K / π x 5.31 x 10⁻²⁶ kg)¹/²
vavg = 517 m/s
Root mean square (RMS) speed:
vrms = (3kT / m)¹/²
where vrms is the RMS speed.
Plugging in the values, we get:
vrms = (3 x 1.38 x 10⁻²³ J/K x 298 K / 5.31 x 10⁻²⁶ kg)¹/²
vrms = 482 m/s.
Therefore, the most probable speed for O2 molecules at room temperature is approximately 484 m/s, the average speed is approximately 517 m/s, and the RMS speed is approximately 482 m/s.
To learn more about most probable speed refer to:
brainly.com/question/29840755
#SPJ4
What aldehyde is needed to prepare the carboxylic acid by an oxidation reaction?
Answer:
The oxidation of an aldehyde can be achieved using a variety of oxidizing agents, including potassium permanganate (KMnO4), chromium trioxide (CrO3), and silver oxide (Ag2O). The specific oxidizing agent used will depend on the conditions and desired yield.
For example, if we want to prepare acetic acid, we can oxidize ethanol (an alcohol) using a strong oxidizing agent like potassium permanganate. Alternatively, we can oxidize acetaldehyde (an aldehyde) using a milder oxidizing agent like silver oxide.
Therefore, any aldehyde can be used to prepare a carboxylic acid by oxidation, but the specific oxidizing agent and reaction conditions may vary depending on the aldehyde and desired yield.
The aldehyde that is need for the preparation of the acid is CH3(CH2)8CH(Cl)CHO
How do you prepare an acid from an aldehyde?It is not possible to directly prepare an acid from an aldehyde as an aldehyde is already an oxidized form of a primary alcohol, which can be further oxidized to form a carboxylic acid.
Aldehydes can be oxidized to carboxylic acids using strong oxidizing agents such as potassium permanganate (KMnO4) or chromic acid (H2CrO4). The reaction conditions need to be carefully controlled to avoid over-oxidation of the aldehyde to carbon dioxide.
Learn more about aldehyde:https://brainly.com/question/30665943
#SPJ1
If I have 28.2 moles of gas at a temperature of 61.8
C, and a volume of 79.2 liters, what is the pressure of the gas in kpa?
The pressure of the 28.2 moles of gas at a temperature of 61.8°C is 991 kPa.
What is the pressure of the gas?Ideal gas law states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.
It is expressed as;
PV = nRT
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK )
Given that:
Number of moles n = 28.2
Temperature T = 61.8°C
Volume V = 79.2 L
Pressure P = ?
First, let's convert the temperature from Celsius to Kelvin:
T = 61.8 + 273.15
T = 334.95 K
Now we can plug in the values and solve for P:
P = nRT/V
P = ((28.2 mol) × (0.08206 Latm/molK) × (334.95 K) ) / 79.2 L
P = 9.7866atm
Convert atm to kPa ( multiply the pressure value by 101.3 )
P = 991 kPa
Therefore, the pressure of the gas is 991 kPa.
Learn more about Ideal Gas Law here: brainly.com/question/4147359
#SPJ1
Answer:
The pressure of the gas is 991.6 kPa (to the nearest tenth).
Explanation:
To find the total pressure of the gas in kPa, we can use the ideal gas law.
Ideal Gas Law[tex]\boxed{\sf PV=nRT}[/tex]
where:
P is the pressure measured in kilopascal (kPa).V is the volume measured in liters (L).n is the number of moles.R is the ideal gas constant (8.314472 L kPa mol⁻¹ K⁻¹).T is the temperature measured in kelvin (K).Convert the temperature from Celsius to kelvin by adding 273.15:
[tex]\implies \sf 61.8^{\circ}C=61.8+273.15=334.95\;K[/tex]
Therefore, the values are:
V = 79.2 Ln = 28.2 molR = 8.314472 L kPa mol⁻¹ K⁻¹T = 334.95 KSubstitute the values into the formula and solve for P:
[tex]\implies \sf P \cdot 79.2=28.2 \cdot 8.314472 \cdot 334.95[/tex]
[tex]\implies \sf P=\dfrac{28.2 \cdot 8.314472 \cdot 334.95}{79.2}[/tex]
[tex]\implies \sf P=991.60471...[/tex]
[tex]\implies \sf P=991.6\;kPa\;(nearest\;tenth)[/tex]
Therefore, the pressure of the gas is 991.6 kPa (to the nearest tenth).
Question: Why Are The Properties Of Diamond And Graphite Different, Even Though They Are Both Composed Of Pure Carbon? Select The Two Answers That Explain This Difference. Group Of Answer Choices The Atoms In Diamond And Graphite Have Different Hybridizations. The Bonding In Diamond Can Be Modeled With Valence Bond Theory Whereas The Bonding In Graphite Can Only Be
Why are the properties of diamond and graphite different, even though they are both composed of pure carbon? Select the two answers that explain this difference.
Group of answer choices
The atoms in diamond and graphite have different hybridizations.
The bonding in diamond can be modeled with Valence Bond Theory whereas the bonding in graphite can only be modeled with Molecular Orbital Theory.
The bonding in diamond and graphite are different.
The atoms in diamond and graphite are different isotopes of carbon.
The correct answer is option a. and option c.
The properties of diamond and graphite are different, even though they are both composed of pure carbon because the atoms in diamond and graphite have different hybridizations and the bonding in diamond and graphite is different.
In diamonds, carbon atoms are sp3 hybridized, forming a tetrahedral structure with strong covalent bonds, making it hard and rigid. In graphite, carbon atoms are sp2 hybridized, forming planar hexagonal layers with weaker van der Waals forces between the layers, making it soft and slippery.
The bonding in diamond is composed of strong covalent bonds, while in graphite, there are strong covalent bonds within the layers and weaker van der Waals forces between the layers. This difference in bonding leads to the distinct properties of each allotrope.
We can say that the properties of diamond and graphite are different because they have different hybridisation and bonding.
Therefore option a and option c are correct.
Read more about Allotrope here: brainly.com/question/20897327
#SPJ11
you are studying a small stream and find that its ph is 4.5. what does this tell you about the stream, and what might be the cause?
The stream having pH 4.5 is acidic in nature. The reason behind this is likely due to the presence of organic acids.
pH is defined as the hydrogen ion concentration of a solution. If the pH of a solution is below 7 it is considered to be acidic, if it is 7 then it is neutral and pH above 7 is considered to be basic in nature.
Water in streams contains many organic acids, acidic sulphates and nitrates which have a low buffering capacity. Acidic streams occur mostly in the hilly areas and this acidic water is highly corrosive in nature.
To know more about pH here
https://brainly.com/question/30691408
#SPJ4
the empirical formula of a chemical substance is ch2. the molar mass of a molecule of the substance is 56.108 g/mol. what is the molecular formula of the chemical substance? (4 points) c3h4 c4h8 c2h4 c6h6
The molecular formula of the chemical substance is C4H8.
The empirical formula of a chemical substance, CH2, and its molar mass of 56.108 g/mol can be used to calculate the molecular formula of the substance.
In order to do this, we need to divide the molar mass by the empirical formula mass. The empirical formula mass for CH2 is 12.011 g/mol, so the calculation is: 56.108 g/mol / 12.011 g/mol = 4.67.
4.67, is the ratio of the molecular mass to the empirical formula mass.
This means that the molecular formula of the chemical substance is C4H8, which has a molecular mass of 4 x 12.011 g/mol = 48.044 g/mol, and is the closest molecular mass to the given molar mass of 56.108 g/mol.
Therefore, the molecular formula of the chemical substance is C4H8.
to know more about molecular formula refer here:
https://brainly.com/question/14425592#
#SPJ11
true or false: as the nu,ber of attached oxgen atoms increases, the oxidation number of the central atom decreases.
The given statement "As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases" is A. true because When a central atom is attached to more oxygen atoms, its oxidation state decreases. According to the rules of oxidation states, oxygen always has an oxidation state of -2 in almost all its compounds.
Therefore, if we know the oxidation state of oxygen in a compound, we can easily find the oxidation state of the central atom. In compounds that have a central atom and multiple oxygen atoms attached to it, the oxidation state of the central atom is equal to the sum of the oxidation states of all the attached oxygen atoms. For instance, in sulfuric acid (H2SO4), the oxidation state of sulfur is +6, while the oxidation state of each oxygen atom is -2. So, if we have more than one oxygen atom, the sum of their oxidation numbers will be greater than -2, which in turn causes the oxidation state of the central atom to decrease as compared to its original value. Therefore, the statement As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases Therefore the correct option is A.
The complete question is :
As the number of attached oxygen atoms increases, the oxidation number of the central atom decreases.
a True
b False
Know more about oxidation state here:
https://brainly.com/question/25551544
#SPJ11
a gas is initalaly 800 ml and 115 c. what is the new temperature if the gas volume shrinks to 400 ml
The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.
800 ml is the initial volume (V1). The original temperature is converted to Kelvin using the formula T1 (in Kelvin) = T1 (in Celsius) + 273.15 T1 = 115°C + 273.15 = 388.15 K
T2 = (V2 * T1) / V1,
T2 = (400 ml * 388.15 K) / 800 ml
T2 = 194.075 K
As a result, the new temperature is roughly 194.075 K when the gas volume is reduced to 400 ml.
Thus, The combined gas law equation to get the new temperature when the gas volume decreases from 800 ml to 400 ml: P1 * V1 / T1 equals P2 * V2 / T2.
Learn more about Gas law, refer to the link:
https://brainly.com/question/30458409
#SPJ12
a metal will be placed in fire and an electron will absorb enough energy to be promoted to a higher energy state. what do we call this higher energy state?
When a metal is placed in the fire and an electron absorbs enough energy to be promoted to a higher energy state, this higher energy state is referred to as the excited state.
An excited state is a state of a molecule or atom in which it has absorbed sufficient energy to move an electron from its current orbital to a higher orbital. This state is referred to as the excited state, and the electron that has been elevated to a higher energy level is said to be in an excited state.
The reason behind the electron's promotion to a higher energy state when a metal is placed in fire is that the heat causes the electrons to absorb energy, which causes them to move to a higher energy state. When electrons move to higher energy states, they release energy in the form of light, heat, or other radiation.
Learn more about electron https://brainly.com/question/26084288
#SPJ11
what volume (in ml) of a 0.50 m solution of h2so4 is required to completely neutralize 3.0 grams of naoh?
75 mL of 0.50 M H₂SO₄ solution will be required to completely neutralize 3.0 grams of NaOH.
The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and sodium hydroxide (NaOH) will be:
H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O
From the equation, we can see that 1 mole of sulfuric acid reacts with 2 moles of sodium hydroxide.
First, we need to calculate the number of moles of NaOH present in 3.0 grams:
moles of NaOH = mass/molar mass
moles of NaOH = 3.0 g / 40.00 g/mol (molar mass of NaOH)
moles of NaOH = 0.075 mol
Since 1 mole of H₂SO₄ reacts with 2 moles of NaOH, the number of moles of H₂SO₄ required to neutralize 0.075 moles of NaOH is:
moles of H₂SO₄ = 0.075 mol / 2 = 0.0375 mol
Now, we can use the definition of molarity to calculate the volume of 0.50 M H₂SO₄ required to provide 0.0375 moles of H₂SO₄:
Molarity = moles of solute/volume of solution (in liters)
Volume of solution = moles of solute/Molarity
Volume of solution = 0.0375 mol / 0.50 mol/L
Volume of solution = 0.075 L or 75 mL
To know more about Volume here
https://brainly.com/question/1578538
#SPJ4
if a solution is created by adding water to 2.3 x 10^-4 moles of naoh and 4.5 x 10^-6 moles of hbr until 1l, what is the ph of this solution
The pH of the solution is determined by using the equation mentioned : pH = - log[H+]Where, [H+] = 10^-pH Given the question, the solution has 2.3 x 10^-4 moles of NaOH and 4.5 x 10^-6 moles of HBr in 1 L of water. In order to find the pH of the solution, first, we need to determine the number of moles of H+ ions available in the solution.
Moles of H+ ions = Moles of HBr + Moles of NaOH - Moles of OH-Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - (2 x 2.3 x 10^-4)Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - 4.6 x 10^-4Moles of H+ ions = 1.85 x 10^-4 pH = -log[H+]pH = -log[1.85 x 10^-4]pH = 3.73 (approx)Therefore, the pH of the solution is 3.73 (approx).
The solution has 2.3 x 10^-4 moles of NaOH and 4.5 x 10^-6 moles of HBr in 1 L of water. In order to find the pH of the solution, first, we need to determine the number of moles of H+ ions available in the solution. Moles of H+ ions = Moles of HBr + Moles of NaOH - Moles of OH-Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - (2 x 2.3 x 10^-4)Moles of H+ ions = 4.5 x 10^-6 + 2.3 x 10^-4 - 4.6 x 10^-4Moles of H+ ions = 1.85 x 10^-4.
To know more about Solution refer here:
https://brainly.com/question/30620786#
#SPJ11
sea water contains 1.94% chlorine (by mass). how many grams of chlorine are in there in 400 ml of seawater if the density of seawater is 1.025 g/cm3.
The mass (in grams) of chlorine present in 400 mL of seawater, given that the density of seawater is 1.025 g/cm3, is 0.008 grams
How do i determine the mass of Chlorine?We'll begin by obtaining the mass of the sea water. Details below:
Volume of sea water = 400 mL = 400 / 1000 = 0.4 cm³Density of sea water = 1.025 g/cm³Mass of sea water =?Density = mass / volume
Cross multiply
Mass = Density × Volume
Mass of sea water = 1.025 × 0.4
Mass of sea water = 0.41 g
Finally, we shall determine the mass of chlorine in the sea water. Details below:
Mass of sea water = 0.41 gramsPercentage of chlorine = 1.94%Mass of chlorine = ?Mass of chlorine = Percentage × Mass of sea water
Mass of chlorine = 1.94% × 0.41
Mass of chlorine = 0.008 grams
Thus, the mass of chlorine is 0.008 grams
Learn more about mass:
https://brainly.com/question/1674804
#SPJ1
which of the following combinations of materials would result in a buffer solution? *100. ml of 1.0 m hcl 50.0 ml of 1.0 nacl *100. ml of 1.0 m hno2 100. ml of 2.0 m nano2 *100. ml of 1.0 m ch3nh2 100. ml of 0.50 m ch3nh3 *100. ml of 1.0 m hf 50.0 ml of 1.0 m hclo
Answer: The combination of 100 mL of 1.0 M CH3NH2 and 100 mL of 0.50 M CH3NH3 would result in a buffer solution.
Explanation:
A buffer solution is a solution that can resist changes in pH upon the addition of an acid or a base. To form a buffer solution, we need a weak acid (or base) and its conjugate base (or acid) in similar concentrations.
Option 1: 100 mL of 1.0 M HCl and 50.0 mL of 1.0 M NaCl
This is not a buffer solution because HCl is a strong acid and NaCl is a neutral salt, which does not have an acidic or basic effect on the solution.
Option 2: 100 mL of 1.0 M HNO2 and 100 mL of 2.0 M NaNO2
This is not a buffer solution because HNO2 is a weak acid, but NaNO2 is not its conjugate base. Instead, NaNO2 hydrolyzes to form NaOH and HNO2, which decreases the buffer capacity.
Option 3: 100 mL of 1.0 M CH3NH2 and 100 mL of 0.50 M CH3NH3
This is a buffer solution because CH3NH2 is a weak base and CH3NH3+ is its conjugate acid. They are in similar concentrations, and therefore, can resist changes in pH upon the addition of an acid or a base.
Option 4: 100 mL of 1.0 M HF and 50.0 mL of 1.0 M HClO
This is not a buffer solution because HF is a weak acid, but HClO is not its conjugate base. Instead, HClO hydrolyzes to form H3O+ and ClO-, which decreases the buffer capacity.
Use the given standard enthalpies of formation to determine the heat of reaction of the following reaction:
Note Heat of formation of elements is 0.
AH° N₂H₂ (1) = +50.6 kJ/mole
AH, H₂0 (1) = -285.9 kJ/mole
AH° CO₂ (g) = -393.5 kJ/mole
C3H6O (1) = -249.5 kJ/mole
CS₂ (g) = +177.4 kJ/mole
AH SO₂ (g) = -296.8 kJ/mole
AH° C6H12 (1) = -156.4 kJ/mole
AH
AH
1. N₂H4(1) + O₂(g) →N₂(g) + 2 H₂O(1)
1. The heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. The heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. The heat of reaction for the given chemical equation is -1161.5 kJ/mole.
How did we get these values?1. N₂H₄(1) + O₂(g) →N₂(g) + 2 H₂O(1)
The balanced chemical equation for the reaction is:
N₂H₄(1) + O₂(g) → N₂(g) + 2 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [0 - 2(-285.9 kJ/mole) + 50.6 kJ/mole] - [1(0) + 1(-50.6 kJ/mole)]
ΔH°rxn = -572.7 kJ/mole + 50.6 kJ/mole
ΔH°rxn = -522.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -522.1 kJ/mole.
2. C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
The balanced chemical equation for the reaction is:
C3H6O(1) + 4 O₂(g) → 3 CO₂(g) + 3 H₂O(1)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively, and ΔH°f is the standard enthalpy of formation.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [3(-393.5 kJ/mole) + 3(-285.9 kJ/mole)] - [1(-249.5 kJ/mole) + 4(0)]
ΔH°rxn = -3576.6 kJ/mole + 249.5 kJ/mole
ΔH°rxn = -3327.1 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -3327.1 kJ/mole.
3. CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
The balanced chemical equation for the reaction is:
CS₂(1) + 3 O₂(g) → CO₂(g) + 2 SO₂(g)
To find the heat of reaction (ΔH°rxn) for this reaction, we need to calculate the difference between the standard enthalpies of formation of the products and reactants, multiplied by their respective stoichiometric coefficients:
ΔH°rxn = ΣnΔH°f(products) - ΣmΔH°f(reactants)
where n and m are the stoichiometric coefficients of the products and reactants, respectively.
Using the given standard enthalpies of formation, we get:
ΔH°rxn = [1(-393.5 kJ/mole) + 2(-296.8 kJ/mole)] - [1(177.4 kJ/mole) + 1(0)]
ΔH°rxn = -984.1 kJ/mole - 177.4 kJ/mole
ΔH°rxn = -1161.5 kJ/mole
Therefore, the heat of reaction for the given chemical equation is -1161.5 kJ/mole.
learn more about heat of reaction: https://brainly.com/question/11631046
#SPJ1
results.
4. Analyze your experiment and your data about saturation.
Data saturation refers to the moment in a research process when enough data has been gathered to make required conclusions and further data collection will not yield value-added insights.
What is data saturation ?Data saturation refers to the moment in a research process when enough data has been gathered to make required conclusions and further data collection will not yield value-added insights.
Saturation is used as a measure for ending data gathering and/or analysis in qualitative research. Its roots are in grounded theory (Glaser and Strauss 1967), but it now demands acceptance in a variety of qualitative research methods. Data saturation, code saturation, and theme saturation are concerned with the scope of gathered data, whereas meaning saturation and theory saturation are concerned with the profundity of research data.
Learn more about saturation
https://brainly.com/question/1851822
#SPJ1
match the following terms with the correct definitions. - homogeneous equilibrium - heterogeneous equilibrium - le chatelier's principle - complex ion a. a metal ion bonded to lewis acids. b. an equilibrium involving a catalyst in the same phase as the other species. c. an equilibrium involving a catalyst in a different phase as the other species. d. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state. the reaction proceeds in the direction that-at least partially-offsets the change in conditions. e. an equilibrium involving reactants and products in the same phase. f. a metal ion bonded to lewis bases. g. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, the the reaction adjusts towards a new equilibrium state. the reaction proceeds in the direction that-at least partially-increases the change in conditions. h. none of these
Homogeneous equilibrium: an equilibrium involving reactants and products in the same phase.
Heterogeneous equilibrium: an equilibrium involving a catalyst in a different phase as the other species.
Le Chatelier's Principle: if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state.
The reaction proceeds in the direction that-at least partially-offsets the change in conditions. Complex ion: a metal ion bonded to Lewis acids or Lewis bases.
Homogeneous equilibrium occurs when the reactants and products of a reaction exist in the same phase, either solid, liquid, or gas. Heterogeneous equilibrium happens when the reactants and products are in different phases.
Le Chatelier's Principle states that if a chemical reaction is subjected to a change in conditions, the reaction will adjust towards a new equilibrium state in a way that offsets the change in conditions.
A complex ion is a metal ion bonded to Lewis acids or Lewis bases, which are molecules or ions with an extra pair of electrons that can be donated to other molecules or ions.
To know more about Le Chatelier's Principle click on below link:
https://brainly.com/question/29009512#
#SPJ11
a desulfurization reaction involves the conversion of a thioacetal to an alkane by treating the thioacetal with raney nickel. during the reaction, the sulfur atoms of the thioacetal are replaced by hydrogen atoms. desulfurization reactions are a type of:
A desulfurization reaction is a type of hydrogenation reaction, where sulfur atoms in a compound are replaced by hydrogen atoms. In a desulfurization reaction, a thioacetal is treated with Raney nickel, resulting in the conversion of the thioacetal to an alkane.
Desulfurization reactions are a type of chemical reaction that involves the conversion of a thioacetal to an alkane by treating the thioacetal with raney nickel. During the reaction, the sulfur atoms of the thioacetal are replaced by hydrogen atoms.
Desulfurization is the process of converting sulfur-containing chemicals into non-sulfur containing substances by means of a chemical reaction. It is applied in refineries and in the petrochemical industry to lower sulfur emissions. Sulfur emissions contribute to acid rain and other environmental problems.
Therefore, desulfurization is an essential process for reducing pollution caused by sulfur dioxide emissions. In conclusion, desulfurization reactions are a type of chemical reaction that involves the replacement of sulfur atoms with hydrogen atoms. They are used in the petrochemical industry to reduce sulfur emissions and prevent environmental pollution caused by acid rain and other environmental problems.
For more such questions on hydrogenation , Visit:
https://brainly.com/question/12833896
#SPJ11
which of the following molecules will not contain a multiple bond in its lewis structure? multiple choice c2h2 cs2 ncl3 co2 ch2o
The Lewis structure of the compound is used to predict its chemical behavior. In the given options, which of the following molecules will not contain a multiple bond in its Lewis structure is Carbon dioxide (CO2) will not contain a multiple bond in its Lewis structure.
Carbon dioxide (CO2) is made up of two oxygen atoms that are covalently bonded to a single carbon atom. CO2 has a linear geometry, with each O=C=O bond angle measuring 180 degrees. In its Lewis structure, CO2 contains two double bonds. The carbon atom has a total of four valence electrons, while each oxygen atom has a total of six valence electrons.
Both the O atoms and C atom share four valence electrons in this covalent compound. One of the oxygen atoms binds with carbon by a double bond, and the other oxygen atom binds with the carbon atom through a double bond. All the octets are completed in the molecule.
Each molecule is different and has different Lewis structures. The elements in the same group of the periodic table have the same valency, so they follow the same Lewis structure pattern. For example, all the halogens have a valency of 1 and follow the same pattern in the Lewis structure.
For more question on Lewis structure click on
https://brainly.com/question/20300458
#SPJ11
an organism that uses inorganic co2 as its carbon source is called a(n) while an organism that must obtain its carbon in an organic form is referred to as a(n)
An organism that uses inorganic CO₂ as its carbon source is called an autotroph, while an organism that must obtain its carbon in an organic form is referred to as a heterotroph.
An autotroph is able to produce its own organic molecules from inorganic sources using energy from light, inorganic chemical reactions, or both. Photosynthesis is a type of autotrophy in which energy from sunlight is used to convert carbon dioxide into carbohydrates.
On the other hand, heterotrophs are organisms that must obtain their organic molecules by consuming other organisms or their byproducts.
They do not have the ability to make their own organic molecules from inorganic sources. Examples of heterotrophic organisms include animals, fungi, and many bacteria.
To know more about autotroph click on below link:
https://brainly.com/question/11209881#
#SPJ11
what mass of na2cro4 is required to precipitate all of the silver ions from 72.3 ml of a 0.134 m solution of agno3?
The mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.
To calculate the mass of Na2CrO4 required to precipitate all the silver ions from a 72.3 mL of 0.134 M solution of AgNO3, we need to use the balanced equation for the reaction between AgNO3 and Na2CrO4:
2AgNO3 + Na2CrO4 → Ag2CrO4 + 2NaNO3
From the balanced equation, we see that 2 moles of AgNO3 reacts with 1 mole of Na2CrO4 to form 1 mole of Ag2CrO4. Therefore, the number of moles of AgNO3 in the given solution is:
0.134 M x 0.0723 L = 0.00970 moles
This means that we need half that amount of Na2CrO4 to precipitate all the silver ions, which is:
0.00485 moles
The molar mass of Na2CrO4 is 161.97 g/mol, so the mass of Na2CrO4 required is:
0.00485 moles x 161.97 g/mol = 0.786 g
Therefore, the mass of Na2CrO4 required to precipitate all the silver ions from 72.3 mL of 0.134 M solution of AgNO3 is 0.786 g.
For more questions like Silver ions click the link below:
https://brainly.com/question/30544640
#SPJ11
the unit cell in a certain lattice consists of a cube formed by an anion, a, at each corner, an anion in the center, and a cation,x, at the center of each face. how many anions and cations are there in the unit cell?
Answer: There are 8 anions and 6 cations in the unit cell.
There are 8 anions and 6 cations in the unit cell. The unit cell consists of a cube, with an anion, 'a', at each corner, an anion in the center, and a cation, 'x', at the center of each face.
The cube is made up of 8 cubes, each of which is made up of one anion at each corner, and one cation at the center. Therefore, there are 8 anions in the unit cell, one at each corner. In addition, there is an anion in the center of the unit cell.
The 6 cations are located in the center of each of the faces of the cube. The cations are located in the middle of each face and therefore, there are 6 cations in the unit cell.
In total, there are 8 anions and 6 cations in the unit cell.
Learn more anions and cations here:
https://brainly.com/question/20781422#
#SPJ11
if 75.0 grams of carbonic acid are sealed in a 2.00 l soda bottle at room temperature (298.15 k) and decompose completely via the equation below, what would be the final pressure of carbon dioxide (in atm) assuming it had the full 2.00 l in which to expand?
The final pressure of carbon dioxide in the soda bottle, assuming it had the full 2.00 L in which to expand, is 1.20 atm.
The equation for the decomposition of carbonic acid is: H2CO3 → H2O + CO2.
When 75.0 g of carbonic acid is sealed in a 2.00 L soda bottle at room temperature (298.15 K), the decomposition reaction will occur and the carbon dioxide (CO2) will expand to fill the available space in the bottle.
The final pressure of carbon dioxide (in atm), the ideal gas law equation:
PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.
Since we know the initial amount of carbonic acid (75.0 g), the number of moles present: n = (75.0 g H2CO3) / (84.01 g/mol), giving us a value of 0.894 moles.
The volume of the bottle (2.00 L) and the temperature (298.15 K). Thus, we can plug these values into the ideal gas law equation to calculate the final pressure of carbon dioxide:
P = (0.894 mol CO2) (0.08206 L*atm/K*mol) (298.15 K) / (2.00 L), which gives us a pressure of 1.20 atm.
Therefore, the final pressure of carbon dioxide in the soda bottle, assuming it had the full 2.00 L in which to expand, is 1.20 atm.
to know more about carbon dioxide refer here:
https://brainly.com/question/13528931#
#SPJ11