how many atoms in the peptide backbone are linked together to make one turn of the alpha helix axis?

The complete statement is: An acid donates a proton to form its conjugate base, which therefore has one less proton, and one more electron than its acid.

An acid is a substance that can donate hydrogen ions (H+) or accept electron pairs, while a base is a substance that can accept hydrogen ions (H+) or donate electron pairs.

When an acid donates a proton to form its conjugate base, the acid loses one hydrogen ion (H+) and becomes a negative ion with a charge of -1. The conjugate base, on the other hand, gains one hydrogen ion (H+) and becomes a positive ion with a charge of +1.

learn more about conjugate base here:

https://brainly.com/question/30225100

#SPJ11

We will need 1.0 mol NaOH to react with 0.5 mol pf H2CO3.

Let's understand this in detail:

The balanced chemical equation of the neutralization reaction between H2CO3 and NaOH is

H2CO3 + 2NaOH ⟶ Na2CO3 + 2H2O.

We need to use the mole ratio from the balanced equation to determine how many moles of NaOH will react with 0.50 mol of H2CO3. We can see from the equation that 1 mole of H2CO3 reacts with 2 moles of NaOH.

Therefore, 0.50 mol of H2CO3 will react with

(2/1) x 0.50 = 1.0 mol of NaOH.

Answer: c. 1.0 mol NaOH.

#SPJ11

Learn more about neutralization reaction: Define Neutralisation reaction along with examples.​ https://brainly.com/question/23008798

Yes, it is reasonable to expect that if you inject standards greater than those you used in this lab, the calibration lines may become curved. This is because higher standards create a wider dynamic range of responses which may cause the linear calibration line to become curved.

The reason for this is that the relationship between the signal and the concentration may no longer be linear if the standards are not in the same range as the analyte of interest. Calibration lines are established in analytical chemistry to relate the signal of an instrument to the concentration of a particular analyte. These lines are typically created using standards with known concentrations of the analyte. The slope and intercept of the line can be used to determine the concentration of unknown samples based on the signal they produce.
If the standards used in calibration are outside the range of the analyte, then the calibration line may not be linear. In other words, the relationship between the signal and the concentration may become curved. This can lead to inaccurate results when analyzing unknown samples.In order to ensure accurate results, it is important to adjust the injection volumes of the standards accordingly. It is also important to note that when standards are greater than those used in the lab, a larger injection volume may be needed to produce accurate results.
Therefore, it is important to use standards that are within the same range as the analyte of interest to ensure that the calibration line is linear. This will improve the accuracy and precision of the analytical method.

For more such questions on calibration , Visit:

https://brainly.com/question/31140467

#SPJ11

The matching is like :- (A) Atomic mass - amu (atomic mass units) (B) Molarity - mol/liter (C) Molar mass - g/mol (grams per mole)

The atomic mass (in amu) is used to convert between the mass of an element and the number of moles of that element, while the molar mass (in g/mol) is used to convert between the mass of a compound and the number of moles of that compound. Molarity (in mol/L) is used to express the concentration of a solution. In chemistry, the atomic mass of an element is the mass of a single atom of that element relative to the mass of a carbon-12 atom, which is defined as exactly 12 atomic mass units (amu). The atomic mass is typically given in units of amu, and it is used to convert between the mass of an element and the number of moles of that element. Molarity is a unit of concentration that is commonly used in chemistry. It is defined as the number of moles of solute per liter of solution. The unit for molarity is mol/L, which is often abbreviated as M. Molar mass is the mass of one mole of a substance. It is expressed in units of grams per mole (g/mol). The molar mass is used to convert between the mass of a compound and the number of moles of that compound. For example, if we know the atomic mass of an element (in amu), we can use it to calculate the molar mass of that element (in g/mol). Similarly, if we know the molarity of a solution (in mol/L) and the molar mass of the solute (in g/mol), we can calculate the mass of the solute in a given volume of the solution.

In summary, the atomic mass, molarity, and molar mass are all important concepts in chemistry that are expressed in different units. Understanding these units and how to use them is essential for many calculations in chemistry.

To know more about atomic mass please refer: https://brainly.com/question/17067547

#SPJ1

The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.

The temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm can be calculated using the Ideal Gas Law. The Ideal Gas Law is expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature.

In this case, we know that the pressure is 2.05 atm and the volume is 2 L. We also know that helium is a monoatomic gas with a molar mass of 4 g/mol. We can use the universal gas constant R = 0.0821 L atm/mol K. Plugging in these values, we get:

2.05 atm × 2 L = n × 0.0821 L atm/mol K × T

Dividing both sides by 0.0821 L atm/mol K gives:

n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × T)

Simplifying, n = 50 T / R. We can now solve for T: n = 50 T / R => T = nR / 50

Substituting in the values we have:

n = (2.05 atm × 2 L) / (0.0821 L atm/mol K × 1 mol / 4 g)

= 24.88 molT = (24.88 mol × 0.0821 L atm/mol K) / 50

= 0.04111 K or 41.11 °C.

Therefore, the temperature of helium gas confined in a two Litre flask under a pressure of 2.05 atm is approximately 41.11 °C.

To learn more about temperature; https://brainly.com/question/25677592

#SPJ11

To prepare a buffer of a desired pH, the Henderson-Hasselbalch equation can be used:

pH = pKa + log([A-]/[HA])

where pH is the desired pH, pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, the weak acid is , and its dissociation reaction is:

↔ +

The dissociation constant (Ka) for this reaction is given as .

To calculate the ratio to required to prepare a buffer at a desired pH, we first need to rearrange the Henderson-Hasselbalch equation as follows:

[A-]/[HA] = 10^(pH - pKa)

Substituting the values, we get:[A-]/[HA] = 10^( - ) =

Therefore, the required ratio of [A-] to [HA] is : . This means that to prepare a buffer at the desired pH, we need to mix of and of in the buffer solution.

Substituting refers to the process of replacing one element, molecule, or group with another in a chemical reaction or a chemical compound. It is a common chemical technique used in various chemical reactions and organic synthesis. By substituting one atom or group for another, it is possible to change the properties and behavior of the molecule or compound, which can have important implications in various fields such as medicine, materials science, and industry.

To know more about Substituting visit :

https://brainly.com/question/10423146

#SPJ1

1) protons: 3

they're positive so they go in the middle

2) atomic mass (rounded): 7 minus the atomic number (7-4)=3 neurons

as neutrons are neither negative or positive they go in the middle as well

3) electrons: 3

the number of electrons is the same as protons so 3. they go on the outside as they are negative. Electrons never go in the center

The percent yield of the reaction is 56.0%.

The percent yield of the reaction between 11.9 g of CHCl3 with excess chlorine to produce 10.0 g of CCl4 can be calculated as follows:

Step 1: Write a balanced chemical equation for the reaction CHCl3 + 3Cl2 → CCl4 + 3HCl

Step 2: Calculate the molar mass of CHCl3M(CHCl3) = 12.01 + 1 + 35.45 × 3 = 119.38 g/mol

Step 3: Determine the number of moles of CHCl3n(CHCl3) = m/M = 11.9/119.38 = 0.1 mol

Step 4: Calculate the theoretical yield of CCl4

The balanced equation shows that one mole of CHCl3 reacts with 3 moles of Cl2 to produce one mole of :

CCl4n(CCl4) = n(CHCl3) × (1 mol CCl4/1 mol CHCl3) × (3 mol Cl2/1 mol CHCl3) × (70.9 g CCl4/1 mol CCl4) = 17.87 g CCl4

Step 5: Calculate the percentage

yield% yield = (actual yield/theoretical yield) × 100%

The actual yield of CCl4 is given as 10.0 g% yield = (10.0/17.87) × 100% = 56.0%

Therefore, the percent yield of the reaction is 56.0%.

Learn more about percent yield here:

https://brainly.com/question/17042787#

#SPJ11

Assuming the ice is originally at 0°C, 414 kJ in energy can therefore melt about 1237.1 grams of ice.

At its melting point, 1 kilogramme of ice requires 3360000 J in heat energy to become water. Q. ____ heat energy will be needed to dissolve 10 kg of ice now at melting point. (333.55 kJ kg1 is the latent fusion energy of water)

Water requires far more energy too evaporate; at air pressure and the usual normal boiling of 100 C, 1 kilogramme or liquid water would require 2256 kJ to turn into steam (water vapor).

To know more about grams visit:

https://brainly.com/question/30526303

#SPJ1

The rate constant at 227°C is a. 6.7 x [tex]10^{-22}[/tex].

The Arrhenius equation states that the rate constant (k) is equal to A × e(-Ea/RT).

Given values:  A = 2.2 x 10¹³ s⁻¹, Activation energy (Ea) = 150 kJ/mol, Temperature (T) = 227°C = 500 K.

For this, we need to substitute the given values in the Arrhenius equation as

k = A × e(-Ea/RT)

k = 2.2 x 10¹³ s⁻¹ × e(-150000 J/mol / (8.31 J/mol-K × 500 K))

k = 2.2 x 10¹³ s⁻¹ × e(-30.12)

k = 6.69 x 10⁻¹² s⁻¹

Therefore, the value of the rate constant at 227°C is 6.69 x 10⁻¹² s⁻¹. Hence, option A is the correct answer.

To know more about Arrhenius equation:

https://brainly.com/question/30653541

#SPJ11

The combination that will produce an insoluble salt is b) MnSO4 Pb(NO2)2.

A salt is a chemical compound made up of cations (positively charged ions) and anions (negatively charged ions) (negatively charged ions). The ions must be combined in such a way that the sum of the charges is zero. NaCl is the most well-known saltand it is made up of sodium cations (Na+) and chloride anions (Cl-).MnSO4 Pb(NO2)2 is the answer since both of these elements are soluble. MnSO4 is a soluble substance that is sometimes used in the production of ceramics.

MnSO4 is often used as a nutritional supplement for animals since it is a good source of manganese. Pb(NO2)2 is a powder that is bright yellow, it has a molar mass of 325.2 g/mol. It is made up of two NO2 anions (negatively charged ions) and one Pb2+ cation (positively charged ion).The formation of insoluble salts can occur when the cations and anions in a reaction solution bind to create a new solid. Since the newly formed solid is insoluble, it settles to the bottom of the solution and can be separated from the liquid through filtration. The insoluble salt that is formed is a white or colorless substance that appears as a powder.

Learn more about salt at:

https://brainly.com/question/13818836

#SPJ11

The molar mass of the unknown gas can be calculated using the Ideal Gas Law: PV=nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

To solve for the molar mass, we need to calculate the number of moles. We can do this by rearranging the equation: n=PV/RT.

Therefore, the number of moles is (1520 mmHg x 355 mL) / (8.314 L-atm/mol-K x 275K) = 0.02814 mol.

The molar mass is equal to the mass of the sample divided by the number of moles, so the molar mass of the unknown gas is 2.0g/0.02814mol = 70.89 g/mol.

To know more about molar mass, refer here:

https://brainly.com/question/29573011#

#SPJ11

Answer :  625 mL of the salt solution with a molarity of 20.0 mol/L can be added to the original solution to create a new solution with a molarity of 5.00 mol/L.

We can use the formula for calculating the molarity of the new solution: M1V1 + M2V2 = M3V3 where, M1 is the molarity of the first solution, V1 is the volume of the first solution, M2 is the molarity of the second solution ,V2 is the volume of the second solution, M3 is the molarity of the final solution and V3 is the volume of the final solution

Now, we will plug in the given values: M1 = 2.50 mol/LV1 = 5.00 LM2 = 20.0 mol/LV2 =  5.00 mol/L, V3 = 5.00 L. We can rearrange the formula to find V2 as  = (M3 V3 - M1 V1) / M2 V2 = (5.00 mol/L x 5.00 L - 2.50 mol/L x 5.00 L)/20.0 mol/LV2 = 0.625 L or 625 mL. So we require  0.625 L or 625 ml salt solution.

Know more about molarity here:

https://brainly.com/question/8732513

#SPJ11

The number of moles of aspirin, C₉H₈O₄, there are in a tablet that contains 325 mg of aspirin 0.00180 moles.

To calculate the number of moles of aspirin, the molar mass must first be determined. The molar mass of aspirin (C₉H₈O₄) is the sum of the atomic masses of each element in the compound, which are carbon (12.0107 g/mol), hydrogen (1.00794 g/mol), and oxygen (15.9994 g/mol). The total molar mass of aspirin is:

(9 x 12.0107) + (8 × 1.00794) + (4 × 15.9994) = 180.15 g/mol.

The number of moles of aspirin in a 325 mg tablet can be calculated by dividing its mass, 325 mg (0.325 g), by the molar mass of aspirin.

moles = mass/molar mass

Plugging in the values, we get:

moles = 325 mg(1 g/1000mg) / (180.15 g/mol) = 0.00180 moles

In conclusion, there are 0.00180 moles of aspirin, C₉H₈O₄, in a tablet that contains 325 mg of aspirin.

Learn more about moles here: https://brainly.com/question/14357742.

#SPJ11

The pair of elements that are likely to form an ionic compound are cesium and magnesium.

In an ionic compound, the elements form ions that are held together by ionic bonds.

Ionic compounds are chemical compounds that are formed between two or more elements that have significant differences in their electronegativity. Electronegativity is the ability of an atom to attract electrons towards itself, and it is affected by the number of protons in the nucleus and the distance between the nucleus and the valence electrons.

Ionic compounds are usually made up of metals and nonmetals. In these compounds, the metal atoms lose one or more electrons to form positively charged ions known as cations. At the same time, nonmetal atoms gain one or more electrons to form negatively charged ions known as anions. The attraction between these ions leads to the formation of a crystal lattice. The strength of this attraction is known as the ionic bond.

To determine whether two elements are likely to form an ionic compound, you need to compare their electronegativity values. If the difference is large, then the compound is likely to be ionic. In general, metals have low electronegativity values, while nonmetals have high electronegativity values. Cesium has an electronegativity of 0.79, while magnesium has an electronegativity of 1.31. The difference in their electronegativity values is 0.52, which is considered significant. Therefore, cesium and magnesium are likely to form an ionic compound.

For more such questions on ionic compound, click on:

https://brainly.com/question/2687188

#SPJ11

By plugging in the values for each of the parameters and solving for t, the time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze can be determined.

The time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze at room temperature depends on the specific conditions of the reaction. Generally, it will take several hours for this reaction to occur.

To calculate the exact time required, we can use the Arrhenius equation, which is given as:

   k = A*e(-Ea/RT)

Where:

   k = rate constant for the reaction

   A = pre-exponential factor

   Ea = activation energy

   R = gas constant

   T = temperature

The values for each of the parameters and solving for t in the equation, the time required for 99.9% of the 2-chloro-2-methylpropane to hydrolyze can be determined.

Find out about 2-chloro-2-methylpropane

https://brainly.com/question/10695884#

#SPJ11

As a result, we would anticipate 487.49 grams of Calcium sulfate to result from a reaction between 200 grams of Iron and Calcium sulfate.

Number-wise, the mass of one mole (or formula unit) in atomic mass units is equal to the mass of one mole (or formula unit) in grams. One mole of Oxygen molecules, for instance, weighs 32.00 g and a single Oxygen molecule, 32.00 u.

We can use the following chemical equation, assuming you meant to inquire about the interaction between Iron and Calcium sulfate:

Iron + Calcium sulfate → Ferrous sulfate + Calcium

These numbers can be used to determine how many moles of iron there are in 200 grams:

200 g Iron × (1 mol Iron / 55.85 g Iron) = 3.58 mol Iron

We can infer that 3.58 moles of Calcium sulfate would be formed in this reaction because the stoichiometric ratio of Iron to Calcium sulfate is 1:1.

We can use the following equation to determine the mass of Calcium sulfate generated:

Mass of Calcium sulfate= number of moles of Calcium sulfate× molar mass of Calcium sulfate

Mass of Calcium sulfate = 3.58 mol Calcium sulfate × 136.14 g/mol

Mass of Calcium sulfate = 487.49 g

To know more about molecules visit:-

https://brainly.com/question/1446104

#SPJ9

Answer: The value of the rate constant at 310.0 K is 54.90 s^-1.

The Arrhenius equation is used to calculate the rate constant of a reaction. It provides a way to relate the temperature of a system to the rate constant of a reaction.

Given the rate constant of a certain first-order reaction, which is 45.9 s^-1 at 300 K, and the energy of activation of 81.0 kJ/mol, we have to calculate the rate constant at 310.0 K.

What is the Arrhenius equation?

The Arrhenius equation is given by: k = Ae^(-Ea/RT)

where: k is the rate constant of the reaction, A is the pre-exponential factor or the frequency factor, Ea is the activation energy, R is the universal gas constant (8.314 J/mol K) T is the temperature in kelvin.

From the given information: k1 = 45.9 s^-1, T1 = 300 K, T2 = 310 K, and Ea = 81.0 kJ/molCalculating the rate constant at 310.0 K using the Arrhenius equation:

k2 = Ae^(-Ea/RT2)

Taking the ratio of the two equations:

k2/k1 = (Ae^(-Ea/RT2))/(Ae^(-Ea/RT1)) k2/k1 = e^(Ea/R) (1/T1 - 1/T2)

Putting in the values:

k2/45.9

= e^ (81000/8.314) (1/300 - 1/310) k2/45.9

= 1.196k2

= 54.90 s^-1

Therefore, the value of the rate constant at 310.0 K is 54.90 s^-1.



Learn more about Arrhenius equation here:
https://brainly.com/question/12907018#



#SPJ11

To support a point of view on the informal qualifications for membership in the House of Representatives, we can refer to the Constitution

According to Article I, Section 2 of the U.S. Constitution, a representative must be at least 25 years old, a U.S. citizen for at least seven years, and a resident of the state they represent at the time of their election. These are the formal qualifications for membership in the House.

However, there are also informal qualifications that are not spelled out in the Constitution but are still important factors in obtaining a seat in the House.

Learn more about membership in the House:https://brainly.com/question/470793

#SPJ1

Answer:

alpha particles have the least penetration power while beta particles have a moderate penetration power and gamma particles have the highest penetration power.

The entropy of the system is increasing. The reason for this is that entropy is a measure of disorder, and as the temperature of the room rises, the ice will begin to melt, which increases the disorder of the system.

The melting of the ice results in an increase in entropy because the solid ice has a lower entropy than the liquid water.

The melting of the ice results in an increase in entropy because the solid ice has a lower entropy than the liquid water. As the ice melts, its molecules become more disordered, and the system's entropy increases.

This increase in entropy is due to the change in the state of the system from a solid to a liquid.

Entropy is a measure of the disorder or randomness of a system. When ice is exposed to a temperature above 0°C, it begins to melt, which increases the disorder or randomness of the system.

The process of melting involves the breaking of the crystal structure of ice into random liquid water molecules. As a result, the entropy of the system increases.

Another way to look at it is that the melting of the ice results in an increase in the number of ways in which the water molecules can be arranged.

In the solid state, the water molecules are arranged in a rigid crystal lattice, which limits the number of ways in which they can be arranged.

In the liquid state, the water molecules are free to move and arrange themselves in a much greater number of ways, resulting in an increase in entropy.

The entropy of the system increases when ice is exposed to a temperature above 0°C because the melting of the ice results in an increase in the disorder or randomness of the system.

This increase in entropy is due to the change in the state of the system from a solid to a liquid, which results in an increase in the number of ways in which the water molecules can be arranged.

to know more about entropy refer here:

https://brainly.com/question/13135498#

#SPJ11

The number of particles in 57.23 grams of trinitrogen diphosphorus is 1.447 × 10²³ particles.

The number of particle in a substance can be calculated by multiplying the moles of the substance by Avogadro's number as follows:

no of particles = Avogadro's number × no of moles

According to this question, there are 57.23 grams of trinitrogen diphosphorus. The molar mass of the compound is 238.028g/mol.

moles = 57.23g ÷ 238.028g/mol

moles = 0.24moles

no of particles = 0.24 moles × 6.02 × 10²³

no of particles = 1.447 × 10²³ particles

Learn more about no of particles at: https://brainly.com/question/11907018

#SPJ1

The correct answer is option D: 54.4 moles CO₂ and 63.4 moles H₂O will be formed when 4.53 moles of C₆H₁₄ completely reacts with excess oxygen.

A chemical reaction is a process that leads to the transformation of one chemical substance to another chemical. It involves breaking and forming of chemical bonds between atoms to create new molecules or compounds.

According to the balanced equation given, 2 moles of C₆H₁₄ react with 19 moles of O₂ to produce 12 moles of CO₂ and 14 moles of H₂O.

Therefore, for 4.53 moles of C₆H₁₄ , the amount of O₂ required for complete reaction would be:

(19/2) x 4.53 = 42.9 moles of O₂  

Since excess oxygen is present, all the C₆H₁₄ will react, and the number of moles of CO₂ and H₂O produced will be:

CO₂ = 12 x (4.53/2) = 27.2 moles

H₂O = 14 x (4.53/2) = 31.7 moles

Therefore, the answer is D) 54.4 moles CO₂ and 63.4 moles H₂O will be formed.

To find out more about chemical reactions, visit:

https://brainly.com/question/29762834

#SPJ1

Answer : The two peaks of voltage observed in each run occur because of Faraday's Law of Induction. When the magnet is dropped into the solenoid, the magnetic flux through the circuit initially increases rapidly, causing the first peak of voltage to occur. This peak is negative, because the direction of the induced current opposes the change in the magnetic flux. The second peak of voltage is higher than the first peak because the magnetic flux has to be completely reversed in order for the second peak to be produced.

Faraday's Induction Law states that the voltage induced in a circuit is proportional to the rate of change of the magnetic flux through the circuit. This peak is positive, because the direction of the induced current is now in the same direction as the change in the magnetic flux.

Know more about voltage here:

https://brainly.com/question/13521443

#SPJ11

If you feel that your placement in English, Math, Reading, ESL and/or Chemistry is incorrect, then you should follow the steps below to resolve the issue:

Step 1: Review the Placement Criteria: The first step is to review the placement criteria for the subject. It will help you to understand the reasons behind your placement.

Step 2: Contact the Admissions Office: After reviewing the placement criteria, if you still believe that your placement is not correct, then you should contact the Admissions Office of your college or university. The Admissions Office will provide you with guidance on how to proceed.

Step 3: Submit Additional Documentation: In case you feel that your placement is incorrect, you can submit additional documentation, including test scores or academic records, to the Admissions Office.

Step 4: Appeal the Placement: If you disagree with the placement decision, you can file an appeal. You must provide reasons for the appeal, and it must be filed within a specified timeframe.

Step 5: Take a Placement Test: Finally, if you feel that your placement is not accurate, then you can take a placement test. The test will assess your skills and knowledge and provide you with a placement that is more accurate.

In conclusion, if you believe that your English, Math, Reading, ESL and/or Chemistry placement is incorrect, then you should follow the steps mentioned above. It is essential to take the necessary steps to ensure that you are placed in the correct level. The correct placement will help you to succeed in your academic journey.

To know more about Placement refer here:

https://brainly.com/question/30297866#

#SPJ11

Crystal violet and Congo red are both acidic substances. This can be determined through the use of pH testing.

When a pH test is performed on a solution, a color change will occur depending on the acidity or basicity of the solution. Crystal violet and Congo red are both acids and not basic because when exposed to a base, such as sodium hydroxide, they will turn a pinkish color.

Similarly, when an acid is added to the solution, they will turn a bluish color. In an experiment, these color changes can be observed, thus helping to determine the nature of the substance.

To further prove the acidic nature of crystal violet and congo red, a titration can be conducted. A titration is a laboratory technique in which a solution of known concentration is used to determine the concentration of an unknown solution. In this experiment, a titrated solution is prepared by mixing a known quantity of crystal violet or congo red with a known quantity of a base, such as sodium hydroxide.

The solution will then be titrated against a known concentration of acid. The end point of the titration can be determined when the solution turns a pinkish color. The results of this experiment will indicate that crystal violet and congo red are both acidic substances.

To learn more about crystal violet, click here:

https://brainly.com/question/30672599

#SPJ11

The Ksp of lead (II) iodide is 7.1x10-9. If it is measured that the lead concentration in the solution is 0.0003 M, then what is the concentration of iodide in the solution is 1.5 x 10-5 M

Given, the Ksp of lead (II) iodide is 7.1x10-9.

The concentration of lead =

Ksp expression of lead (II) iodide is given as,

PbI2 ⇌ Pb2+ + 2I–Ksp = [Pb2+] [I-]2Here, [Pb2+] = 0.0003MIodide.

concentration:

Let’s consider x as the concentration of iodide.

The equilibrium expression of the dissolution of PbI2 is,

PbI2 ⇌ Pb2+ + 2I–Initial: 0 0

Change: -x +x + 2x

At equilibrium: (0-x) (0+ x) (2x)Ksp = [Pb2+] [I-]2= (0.0003) (2x)2= 7.1x10-9x = 1.5 x 10-5 M

The concentration of iodide in solution is 1.5 x 10-5 M.

An alternate method to solve the problem is using the quadratic equation. We can solve the equation as follows,      

Ksp = [Pb2+] [I-]2

= (0.0003) (2x)2

= 7.1x10-92x2

= 7.1x10-9/0.00032x2

= 79x = 1.5x10-5 M

Therefore, the iodide concentration in the solution is 1.5 x 10-5 M.

To know more about Lead concentration refer here:

https://brainly.com/question/30880405#

#SPJ11

1. We can see here that critical mass is important for a fission chain reaction because: C. It allow neutrons to be absorbed by other fissionable nuclei.

Fission chain reaction is a self-sustaining reaction in which the splitting of atomic nuclei of a particular material, such as uranium or plutonium, releases a large amount of energy in the form of heat and radiation.

2. A moderator is important for a fission chain reaction because: A. it keeps the neutrons from escaping the sample.

3. Enrichment is important for a fission chain reaction because: D.  it provides enough fuel to make enough energy.

A moderator is important for a fission chain reaction because it slows down the fast-moving neutrons, making them more likely to be absorbed by other fissionable nuclei and sustain the chain reaction. Without a moderator, the neutrons would move too quickly to be efficiently absorbed.

Learn more about fission chain reaction on https://brainly.com/question/24892298

#SPJ1

The solution that has the highest vapor pressure is the one with the lowest boiling point. The lower the boiling point, the higher the vapor pressure.

Vapor pressure is the pressure exerted by the vapor of a substance in equilibrium with its liquid or solid phase. When the rate of evaporation and the rate of condensation is equal, equilibrium occurs. At a particular temperature, each liquid has a distinct vapor pressure that is directly proportional to its temperature. A liquid with a low boiling point has a higher vapor pressure than one with a high boiling point.

The glucose and sucrose solutions are both nonvolatile solutes, whereas potassium acetate is a volatile solute. As a result, the potassium acetate solution has a higher vapor pressure than either the glucose or sucrose solutions. The answer is option C.10.0 g of potassium acetate in 100.0 ml of water.

Read more about pressure:

https://brainly.com/question/28012687

#SPJ11

Answer:

Methane is a compound that consists of one carbon atom and four hydrogen atoms per molecule. Methane decomposes into two simpler substances, hydrogen and carbon. Therefore, methane is a compound.

What is Methane?

Methane is a colorless, odorless, and flammable gas that has a molecular formula of CH4. Methane is the primary component of natural gas, which is formed from the decay of organic matter deep beneath the Earth's surface.

Methane is a potent greenhouse gas that is more effective at trapping heat than carbon dioxide, despite the fact that it does not remain in the atmosphere for as long.

A component is a pure substance that cannot be separated into simpler substances by physical or chemical methods. Elements and compounds are the two types of components.

Elements are the simplest forms of matter and cannot be separated into simpler substances by chemical means. On the other hand, compounds are made up of two or more elements in definite proportions and can be separated into simpler substances by chemical means.

Thus, methane is a compound.



Learn more about compounds and elements here:

https://brainly.com/question/13516179#



#SPJ11