The empirical formula is the simplest and most reduced ratio of atoms in a compound. It shows the relative number of atoms of each element in a compound. To determine the empirical formula of a compound, you need to know the masses or percentages of each element present.
Here are the steps to determine the empirical formula:
1. Start with the given mass or percentage of each element in the compound.
2. Convert the given masses to moles by dividing the mass by the molar mass of each element. If you have percentages, assume a 100 g sample and convert the percentages to grams.
3. Determine the mole ratio by dividing each element's moles by the smallest number of moles calculated.
4. Round the ratios to the nearest whole number. If they are already close to whole numbers, you can skip this step.
5. Write the empirical formula using the whole number ratios obtained in the previous step. Place the element symbol and the whole number ratio as subscripts.
For example, let's say we have a compound with 12 g of carbon and 4 g of hydrogen.
1. Convert the masses to moles:
- Carbon: 12 g / 12.01 g/mol = 1.00 mol
- Hydrogen: 4 g / 1.01 g/mol = 3.96 mol (rounded to 4.00 mol)
2. Determine the mole ratio:
- Carbon: 1.00 mol / 1.00 mol = 1.00
- Hydrogen: 4.00 mol / 1.00 mol = 4.00
3. Round the ratios (no rounding needed in this example).
4. Write the empirical formula:
- Carbon: C
- Hydrogen: H
The empirical formula of this compound is CH4, which represents the simplest ratio of carbon to hydrogen atoms.
Remember, the empirical formula represents the simplest whole-number ratio of atoms in a compound. It does not provide information about the actual number of atoms in the molecule.
Learn more about empirical formula:
https://brainly.com/question/1603500
#SPJ11
Which of the following observations is consistent with a zero order reaction?a. A graph of reactant concenration vs time is linear b. The half life of the reaction gets longer as concentration decreases c. A graph of inverse reactant concentration vs time is linear d.The half life of the reaction is independent of concentration
a). A graph of reactant concenration vs time is linear. is the correct option. The observation that is consistent with a zero-order reaction is "A graph of reactant concentration vs time is linear."
The zero-order reaction is a reaction where the rate of reaction is independent of the concentration of reactants, i.e., the reaction rate is constant. A zero-order reaction is characterized by a linear graph of concentration vs time. Here are the observations for each option: b.The half-life of the reaction gets longer as concentration decreases. This observation is consistent with the first-order reaction. c. A graph of inverse reactant concentration vs time is linear.
This observation is consistent with the second-order reaction. d.The half-life of the reaction is independent of concentration. This observation is consistent with the zero-order reaction, however, it is not the observation that is specifically related to a zero-order reaction.
To know more about zero-order reaction visit:
brainly.com/question/13490912
#SPJ11
The positive square root of 0. 1445 by division method
The positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).
To find the positive square root of 0.1445 by division method, we can follow these steps:
Step 1: Add a decimal point after the first digit to make it 0.14. Step 2: Pair the digits from the decimal point in pairs starting from the decimal point and moving left. If there is an odd number of digits, pair the leftmost digit with a zero. So, we have: 0. 14 45 Step 3: Find the largest number whose square is less than or equal to 14. Write this number on top of the paired digits and subtract its square from 14. The largest number whose square is less than or equal to 14 is 3. 3 | 0.14 45 9
5 14 4 89
255
Step 4: Bring down the next pair of digits (45) and double the quotient (3) to get the dividend for the next step. So, we have: 3 | 0.14 45 9
5 14 4 89
255
249
---
66
Step 5: Find the largest digit d such that 6d multiplied by d is less than or equal to 66. Write this digit on top of the remainder (66) to get the next digit of the square root.
The largest digit d such that 6d multiplied by d is less than or equal to 66 is 7.
So, we have:
3 | 0.14 45
9 4
5 14 66 4 89
255
249
---
66
63
--
3
Step 6: Repeat steps 4 and 5 until you have found the desired number of decimal places. In this case, we stop here since we only need to find the square root correct to two decimal places.
Therefore, the positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).
Learn more about square root from
https://brainly.com/question/428672
#SPJ11
In a Cement Mortar mix or a Cement concrete mix, what type of admixtures can be used so that workability of mix increases and at the same time the strength properties are not decreased due to excessive water? Discuss how those admixtures work?
In a cement mortar mix or a cement concrete mix, plasticizers, water reducers, and superplasticizers can be used so that workability of the mix increases and at the same time the strength properties are not decreased due to excessive water.
These admixtures work in the following ways:
Plasticizers: These admixtures are organic substances that are used to reduce the water content in the mix without affecting the workability of the mix. Plasticizers are used in small quantities and reduce the surface tension of the water film, thus increasing the fluidity of the mix. Plasticizers also improve the cohesiveness of the mix and are ideal for use in mixes that require pumping. These admixtures improve the workability of the mix by reducing the friction between the particles of the mix.
Water reducers: These admixtures are inorganic substances that are used to reduce the amount of water required for a mix while maintaining the same workability. Water reducers work by reducing the surface tension of the water film, thus increasing the fluidity of the mix. Water reducers are used in larger quantities than plasticizers. These admixtures reduce the amount of water required for a mix, resulting in increased strength, improved durability, and decreased permeability.
Superplasticizers: These admixtures are organic substances that are used to improve the workability of a mix without increasing the water content. Superplasticizers are used in small quantities and are effective in increasing the fluidity of the mix. These admixtures are particularly useful in concrete mixes that require high strength and workability. Superplasticizers improve the workability of the mix by reducing the friction between the particles of the mix, resulting in a highly fluid mix with excellent finishing characteristics.
To know more about admixtures visit:
https://brainly.com/question/31715572
#SPJ11
1 ) Inflation causes things to cost more, and for our money to buy less (hence your grandparents saying "In my day, you could buy a cup of coffee for a nickel"). Suppose inflation decreases the value of money by 4% each year. In other words, if you have $1 this year, next year it will only buy you $0.96 worth of stuff. How much will $100 buy you in 10 years? $_____ 2) Assume there is a certain population of fish in a pond whose growth is described by the logistic equation. It is estimated that the carrying capacity for the pond is 1200 fish. Absent constraints, the population would grow by 130% per year.
If the starting population is given by p0=600, then after one breeding season the population of the pond is given by p1= After two breeding seasons the population of the pond is given by p2 =
Inflation decreases the value of money by 4% each year. For $1, the next year it will only buy [tex]$0.96[/tex] worth of stuff. The actual value of money decreases by [tex](100-96)/100=4/100=0.04.[/tex]
To find v_n, we multiply the initial value [tex]$100[/tex] with the decreased value of each year [tex](1-0.04) over n=10[/tex] years. [tex]v_n= $100(1-0.04)^10v_n= $100(0.96)^10v_n= $100(0.634) = $63.40[/tex]
The actual value of[tex]$100[/tex] after 10 years will be [tex]$63.40.2[/tex]) Given, Starting population of the fish pond is p0=600 and the carrying capacity for the pond is 1200 fish.
To calculate the population after the first breeding season, we need to find the constant of proportionality.
Given, The population of the fish pond grows by 130% per year.\
So,
[tex]a = 1.3p1 = p0 / (1+ a*(p0))[/tex]
[tex]p1= 600 / (1 + 1.3*(600))p1 = 600 / (1 + 780)p1 = 600/781[/tex]
After the first breeding season, the population of the fish pond is 600/781.
Two breeding seasons: To calculate the population after the second breeding season, we need to use the p1 calculated in the previous step.
[tex]p2= p1 / (1+ a*(p1))p2= (600/781) \\(1+ 1.3*(600/781))p2= (600/781) \\(1+ 780/781)p2 = 467400 / 609961[/tex]
The population of the fish pond after two breeding seasons is 467400/609961.
To know more about decreases visit:
https://brainly.com/question/32610704
#SPJ11
Sonia has a big test tomorrow and she hasn't started studying. It is 5pm now and she drinks a
deluxe sized coffee with 200 mg of caffeine. The average half life of caffeine is 6 hours, meaning
that every 6 hours the amount of caffeine in her systems reduces by 50%. How many milligrams
of caffeine will be in her system by 4am? Round your answer to the nearest tenth of a mg.
Answer:
Not sure but i think 183.333333333
3. Design a square column footing for a 400-mm square tied interior column that supports a dead load Pn = 890 kN and a live load P₁ = 710 kN. The column is reinforced with eight 25 mm bars, the base of the footing is 1500 mm below grade, the soil weight is 1600 kg/m³, fy = 413.7 MPa, f = 20.7 MPa (p = 2400 kg/m³), and qa = 240 kPa.
The designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.
To design a square column footing, we need to consider the applied loads, the column reinforcement, and the properties of the soil. Here's the step-by-step process:
Step 1: Determine the total applied load
The total applied load on the column footing is the combination of the dead load (Pn) and the live load (P₁):
Total Load (P) = Pn + P₁
Total Load (P) = 890 kN + 710 kN
Total Load (P) = 1600 kN
Step 2: Calculate the area of the footing
Since the column is square with a side length of 400 mm, the area of the footing is calculated as:
Footing Area (A) = (Column Side Length)²
Footing Area (A) = (400 mm)²
Footing Area (A) = 160,000 mm²
Step 3: Determine the bearing capacity of the soil
The bearing capacity of the soil (q) is given by the formula:
q = qa + (γ × B × Nc)
Where:
qa = Allowable soil pressure
= 240 kPa
γ = Unit weight of soil
= 1600 kg/m³
B = Width of the footing
= Column Side Length
= 400 mm
Nc = Bearing capacity factor for a square footing
= 5.14 (from bearing capacity tables)
Substituting the values:
q = 240 kPa + (1600 kg/m³ × 400 mm × 5.14)
q = 240 kPa + 4,115,200 kg/m²
q = 240 kPa + 4.1152 MPa
q ≈ 4.3552 MPa
Step 4: Check the allowable bearing pressure
The allowable bearing pressure is calculated as:
Allowable Bearing Pressure (p) = 0.45 × f
p = 0.45 × 20.7 MPa
p ≈ 9.315 MPa
Step 5: Calculate the required footing area
The required footing area can be calculated by dividing the total load by the allowable bearing pressure:
Required Footing Area (A_req) = Total Load (P) / Allowable Bearing Pressure (p)
A_req = 1600 kN / 9.315 MPa
A_req ≈ 171.683 m²
Step 6: Determine the required side length of the footing
Since the footing is square, we can calculate the side length by taking the square root of the required footing area:
Footing Side Length (L) = √(Required Footing Area)
L = √(171.683 m²)
L ≈ 13.105 m
Since the column is 400 mm square, we need to round up the footing side length to the nearest larger multiple of the column side length. Therefore, the footing side length will be 450 mm (0.45 m).
Step 7: Verify the reinforcement requirement
The reinforcement requirement is determined based on the applied loads and the column size. In this case, since the column is reinforced with eight 25 mm bars, the reinforcement area (As) is calculated as:
Reinforcement Area (As) = Number of Bars × Cross-sectional Area of One Bar
As = 8 × (π/4) × (25 mm)²
As ≈ 1570.796 mm²
The minimum reinforcement requirement is typically 0.4% to 0.8% of the footing area. Let's calculate the minimum reinforcement:
Minimum Reinforcement (As_min) = 0.004 × Footing Area
As_min = 0.004 × 171.683 m²
As_min ≈ 0.686732 m²
Convert As_min to mm² for easier comparison:
As_min ≈ 686,732 mm²
Since As is greater than As_min, the reinforcement requirement is satisfied.
In summary, the designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.
To know more about square visit
https://brainly.com/question/22827180
#SPJ11
Determine if the following graph is a function. Write the correct words that complete the sentence.
Look at the image down below.
Answer:
Yes, the graph is a function because it passes the vertical line test
Step-by-step explanation:
The vertical line test is a useful way to determine if a graph is a function or not by moving a vertical line from left to right. If it passes through more than one point at any given moment, the graph will not be a function because every input must have a unique output.
If $650 000 is saved for retirement, what rate of interest, compounded monthly, will provide payments of $3750 every month for the next 25 years? Select one: a. 14.606797% b. 0.811327% c. 4.888702% d. 4.867963%
The rate of interest, compounded monthly, that will provide payments of $3750 every month for the next 25 years is approximately 4.867963%. The correct option is d. 4.867963%.
To find the rate of interest, compounded monthly, that will provide payments of $3750 every month for the next 25 years, we can use the formula for the future value of an ordinary annuity:
Future Value = Payment * ((1 + r)^n - 1) / r
Where:
- Future Value is the accumulated amount after the specified time period
- Payment is the amount received at regular intervals (monthly)
- r is the interest rate per compounding period (monthly)
- n is the number of compounding periods (in this case, 25 years * 12 months = 300 months)
We want to find the rate of interest (r), so we rearrange the formula:
r = ((Future Value / Payment) + 1)^(1/n) - 1
Given:
Future Value = $650,000
Payment = $3,750
n = 300
Let's substitute these values into the formula:
r = (($650,000 / $3,750) + 1)^(1/300) - 1
Calculating:
r ≈ 0.048677
Converting to a percentage:
r ≈ 4.867963%
Learn more about rate of interest:
https://brainly.com/question/20690803
#SPJ11
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part A sliding door with weight F= 300 lb is mounted on a horizontal rail as shown in the figure. The coefficients of static friction between the rail and the door at A and Bare 0.15 and 0.25, respectively -5fB N 6 ft Determine the horizontal force that must be applied to the handle in order to move the door to the right. The horizontal force that must be applied to the handle is Ib(Click to select)
The horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.
To determine the horizontal force that must be applied to the handle in order to move the door to the right, we need to consider the forces acting on the door and the coefficients of static friction at points A and B.
Given:
Weight of the door (F) = 300 lb
Coefficient of static friction at point A (μA) = 0.15
Coefficient of static friction at point B (μB) = 0.25
Distance from point A to the handle (d) = 6 ft
Since the door is in equilibrium, the sum of the horizontal forces acting on the door must be zero. This means the applied force at the handle must overcome the frictional forces at points A and B.
The maximum frictional force at point A is given by:
F_frictionA = μA * F
Substituting the given values:
F_frictionA = 0.15 * 300 lb
F_frictionA = 45 lb
Similarly, the maximum frictional force at point B is given by:
F_frictionB = μB * F
Substituting the given values:
F_frictionB = 0.25 * 300 lb
F_frictionB = 75 lb
To move the door to the right, the applied force at the handle must overcome the frictional force at point A and the frictional force at point B. Therefore, the total horizontal force required is the sum of these two frictional forces:
Total horizontal force = F_frictionA + F_frictionB
Total horizontal force = 45 lb + 75 lb
Total horizontal force = 120 lb
Hence, the horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.
To know more about horizontal visit
https://brainly.com/question/29019854
#SPJ11
(i) List and describe one (1) physical and one (1) biological waste water quality parameter each, of concern during waste water treatment. What are their sources and impacts on the environment? [2+2+3+3 marks] 15000
Turbidity is a physical wastewater quality parameter and refers to the turbidity of water caused by suspended solids. It is generated from sources such as soil erosion, industrial waste, and wastewater itself.
When turbidity increases, it affects the environment by reducing the amount of solar radiation, impairing the growth of aquatic plants, and impairing the respiratory and feeding mechanisms of aquatic organisms. affects In addition, reduced heat dissipation can lead to higher water temperatures, further impacting aquatic life.
Biological oxygen demand (BOD), a water quality parameter for biological wastewater, measures the amount of dissolved oxygen consumed by microorganisms when breaking down organic matter. Elevated BOD levels cause oxygen starvation, harming fish and other aquatic organisms and unbalancing aquatic ecosystems.
To learn more about Turbidity:
https://brainly.com/question/31558188
#SPJ4
As the molar masses of molecular substances increase, generally their boiling points and vapor pressures (A) decrease, decrease (B) increase, decrease (C) decrease, increase (D) increase, increase At
As the molar masses of molecular substances increase, their boiling points generally increase due to stronger intermolecular forces, while their vapor pressures generally decrease due to slower molecular motion. Therefore, the answer to the given question is (C) decrease, increase.
As the molar masses of molecular substances increase, generally their boiling points and vapor pressures decrease.
The boiling point of a substance is the temperature at which it changes from a liquid to a gas. It is influenced by intermolecular forces, which are the attractive forces between molecules. As the molar mass of a molecular substance increases, the intermolecular forces generally become stronger. This is because larger molecules have more electrons and a greater surface area, which allows for stronger attractive forces between molecules. Stronger intermolecular forces require more energy to overcome, leading to a higher boiling point. So, as the molar masses of molecular substances increase, their boiling points tend to increase.
On the other hand, vapor pressure is the pressure exerted by the gas molecules when a substance is in equilibrium between its liquid and gaseous phases. It is affected by the ease with which molecules can escape from the liquid phase into the gas phase. As the molar mass of a molecular substance increases, the average speed of its molecules generally decreases. This is because larger molecules have more mass, making it harder for them to move and escape from the liquid phase. As a result, the vapor pressure of a substance decreases as its molar mass increases.
To summarize, as the molar masses of molecular substances increase, their boiling points generally increase due to stronger intermolecular forces, while their vapor pressures generally decrease due to slower molecular motion. Therefore, the answer to the given question is (C) decrease, increase.
Learn more about molecular on :
https://brainly.com/question/475709
#SPJ11
The slope of the tangent line to y=e^5x at x=5 is: m=0e^10 m=e^25 m=5e^5 m=5e^25
The slope of the tangent line to [tex]y = e^5x[/tex] at x = 5 is [tex]m = 5e^25.[/tex]
The slope of the tangent line to the function [tex]y = e^5x[/tex] at x = 5 can be found by taking the derivative of the function with respect to x and evaluating it at x = 5.
Let's start by finding the derivative of [tex]y = e^5x.[/tex]
The derivative of [tex]e^5x[/tex] with respect to x is [tex]5e^5x.[/tex]
This means that the slope of the tangent line to the function at any point is given by [tex]5e^5x[/tex].
Next, we want to find the slope of the tangent line at x = 5.
Plugging in x = 5 into [tex]5e^5x[/tex], we get [tex]5e^(5*5) = 5e^25.[/tex]
Therefore, the slope of the tangent line to [tex]y = e^5x[/tex] at x = 5 is [tex]m = 5e^25.[/tex]
In conclusion, the correct answer is m = [tex]5e^25[/tex].
Learn more about tangent line from this link:
https://brainly.com/question/31133853
#SPJ11
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. find the discharge (m^3 /s) by using Kutter Gand Ganguillet's equation. n=0.020
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. Using Kutter Gand Ganguillet's equation the discharge is 4.719 m³/s.
Given: Diameter of the pipe (D) = 3 m
Depth of flow (y) = 0.75 m
Loss of head (h) = 3 m per km length = 3/1000 m per m length= 0.003 m/m length
N = 0.020
Discharge (Q) = ?
Formula used: Kutter's formula is given by;
Where f = (1/n) {1.811 + (6.14 / R)} ... [1]
Here, R = hy^(1/2)/A
where A = πD²/4
For circular pipes, hydraulic mean depth is given by; Where A = πD²/4 and P = πD.= πD^3/2
Therefore, the discharge is given by the following formula;
Where V = Q/A and A = πD²/4= Q / πD²/4 = 4Q/πD²
Substituting equation [1] and the above values in the discharge formula, we have
On simplifying, we get; Therefore, the discharge is 4.719 m³/s (approx).
Hence, the discharge is 4.719 m³/s.
Learn more about Kutter Gand Ganguillet's
https://brainly.com/question/33139670
#SPJ11
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. The discharge is approximately 1.25 m^3/s.
To calculate the discharge using the Kutter-Ganguillet equation, we need to use the formula:
Q = (1.49/n) * A * R^(2/3) * S^(1/2)
Where:
Q is the discharge,
n is the Manning's roughness coefficient (given as 0.020),
A is the cross-sectional area of the flow,
R is the hydraulic radius, and
S is the slope of the energy grade line.
First, we need to find the cross-sectional area (A) and hydraulic radius (R) of the flow. The cross-sectional area can be calculated using the formula:
A = π * (D/2)^2
Where D is the diameter of the pipe, given as 3.0 m. Plugging in the values:
A = π * (3.0/2)^2
A = 7.07 m^2
Next, we need to calculate the hydraulic radius (R), which is defined as:
R = A / P
Where P is the wetted perimeter of the flow. For a circular pipe, the wetted perimeter can be calculated as:
P = π * D
Plugging in the values:
P = π * 3.0
P = 9.42 m
Now we can find the hydraulic radius:
R = A / P
R = 7.07 / 9.42
R = 0.75 m
Finally, we can calculate the discharge (Q) using the Kutter-Ganguillet equation:
Q = (1.49/0.020) * 7.07 * (0.75)^(2/3) * (3)^(1/2)
Q ≈ 1.25 m^3/s
Therefore, the discharge is approximately 1.25 m^3/s.
Learn more about discharge
https://brainly.com/question/31710428
#SPJ11
Let sets A, B, and C be defined as follows:
A = {x ∈ Z | x = 5a −12 for some integer a},
B = {y ∈ Z | y = 5b + 8 for some integer b}, and
C = {z ∈ Z | z =10c + 2 for some integer c}.
Prove or disprove each of the following statements:
I. A = B
II. B ⊆ C
III. C ⊆ A
For every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.
To prove or disprove the statements, let's examine each one separately:
I. A = B
To prove this, we need to show that every element in set A is also an element in set B, and vice versa.
Let's start by considering an arbitrary element in set A: x = 5a - 12, where a is an integer. We want to find an integer b such that y = 5b + 8 is equal to x.
Setting y = 5b + 8 equal to x = 5a - 12, we can solve for b:
5b + 8 = 5a - 12
5b = 5a - 20
b = a - 4
Therefore, for every element x in set A, we can find a corresponding element y = 5b + 8 in set B, where b = a - 4. This demonstrates that A is a subset of B.
Now let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer a such that x = 5a - 12 is equal to y.
Setting x = 5a - 12 equal to y = 5b + 8, we can solve for a:
5a - 12 = 5b + 8
5a = 5b + 20
a = b + 4
Therefore, for every element y in set B, we can find a corresponding element x = 5a - 12 in set A, where a = b + 4. This demonstrates that B is a subset of A.
Since we have shown that A is a subset of B and B is a subset of A, we can conclude that A = B. Thus, statement I is true.
II. B ⊆ C
To prove this, we need to show that every element in set B is also an element in set C.
Let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer c such that z = 10c + 2 is equal to y.
Setting z = 10c + 2 equal to y = 5b + 8, we can solve for c:
10c + 2 = 5b + 8
10c = 5b + 6
c = (5b + 6) / 10
c = b/2 + 3/5
Since c is required to be an integer, b/2 must be an integer. This means that b must be an even number.
However, set B contains elements of the form 5b + 8, where b can be any integer. Therefore, there are elements in set B that cannot be expressed in the form 10c + 2, where c is an integer.
Hence, not every element in set B is an element in set C. Therefore, statement II is false.
III. C ⊆ A
To prove this, we need to show that every element in set C is also an element in set A.
Let's consider an arbitrary element in set C: z = 10c + 2, where c is an integer. We want to find an integer a such that x = 5a - 12 is equal to z.
Setting x = 5a - 12 equal to z = 10c + 2, we can solve for a:
5a - 12 = 10c + 2
5a = 10c + 14
a = 2c + 2
Therefore
, for every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.
Since we have shown that C is a subset of A, we can conclude that C ⊆ A. Thus, statement III is true.
To summarize:
I. A = B (True)
II. B ⊆ C (False)
III. C ⊆ A (True)
To know more about number click-
http://brainly.com/question/24644930
#SPJ11
Add. −12+(−20) Enter your answer in the box.
Answer: -31
Step-by-step explanation:
-12+(-21) is equal to -12-21 which is -31
The correct answer is:
-32Work and explanation:
Remember the integer rule:
[tex]\sf{a+(-b)=a-b}[/tex]
Similarly
[tex]\sf{-12+(-20)=-12-20}[/tex]
Simplify
[tex]\sf{-32}[/tex]
Therefore, the answer is -32.Using the isothermal transformation diagram for Fe-C alloy of eutectoid composition (given above), specify the nature of the final microstructure, in terms of micro-constituents present and approximate percentages of each, of a small specimen that is subjected to the following time-temperature treatments. In each case assume that the specimen begins at 760°C and that it has been held at this temperature long enough to have achieved a complete and homogeneous austenitic structure. (a) Cool rapidly to 700°C, hold for 104 s, and then quench to room temperature. (b) Reheat the specimen in part (a) to 700°C for 20 h. (c) Rapidly cool to 600°C, hold for 4 s, and then rapidly cool to 450°C, hold for 10 s, and finally quench to room temperature. (d) Cool rapidly to 400°C, hold for 2 s, then quench to room temperature. (e) Cool rapidly to 400°C, hold for 20 s, then quench to room temperature. (1) Cool rapidly to 400°C, hold for 200 s, then quench to room temperature. (8) Rapidly cool to 575°C, hold for 20 s, rapidly cool to 350°C, hold for 100 s, then quench to room temperature. (h) Rapidly cool to 250°C, hold for 100 s, then quench to room temperature in water. Reheat to 315°C for 1 h and slowly cool to room temperature.
The nature of the final microstructure, in terms of micro-constituents present and approximate percentages of each, of a small specimen that is subjected to the given time-temperature treatments on the isothermal transformation diagram for Fe-C alloy of eutectoid composition is given below.
(a) Cool rapidly to 700°C, hold for 104 s, and then quench to room temperature:
The final microstructure is likely to consist of pearlite, which is a mixture of ferrite and cementite.
(b) Reheat the specimen in part (a) to 700°C for 20 h:
The long duration at 700°C will result in the complete transformation to homogeneous austenite.
(c) Rapidly cool to 600°C, hold for 4 s, rapidly cool to 450°C, hold for 10 s, and finally quench to room temperature:
The microstructure may consist of a mixture of different phases, such as bainite, martensite, and possibly retained austenite, depending on the specific transformation diagram.
(d) Cool rapidly to 400°C, hold for 2 s, then quench to room temperature:
The rapid cooling and short hold time at 400°C will likely result in a microstructure of bainite or martensite.
(e) Cool rapidly to 400°C, hold for 20 s, then quench to room temperature:
Similar to (d), the rapid cooling and longer hold time at 400°C may allow for more transformation to occur, resulting in a refined microstructure of bainite or martensite.
(1) Cool rapidly to 400°C, hold for 200 s, then quench to room temperature:
The longer hold time at 400°C will likely result in a higher proportion of bainite or martensite in the final microstructure.
(8) Rapidly cool to 575°C, hold for 20 s, rapidly cool to 350°C, hold for 100 s, then quench to room temperature:
The microstructure will depend on the specific transformation diagram, but it may consist of a combination of phases such as bainite, martensite, and retained austenite.
(h) Rapidly cool to 250°C, hold for 100 s, then quench to room temperature in water. Reheat to 315°C for 1 h and slowly cool to room temperature:
The rapid cooling to 250°C and subsequent holding time may lead to the formation of bainite or martensite. The subsequent reheating and slow cooling will likely result in tempered martensite, which can have a combination of different microstructural features.
Explanation:
Please note that the specific microstructures and their percentages will depend on the specific transformation diagram for the Fe-C alloy of eutectoid composition, which is not provided in the question. The above descriptions provide a general understanding based on common transformations. It's important to refer to the appropriate diagram for accurate predictions.
To know more about time-temperature visit:
https://brainly.com/question/31560986
#SPJ11
Solve y′++36y=δ(t−3),y(0)=y′(0)=0 y(t)= for t<3 for t≥3
The solution to the differential equation is y(t) = 0, for t < 3
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex], for t ≥ 3
How to solve differential equationSolve the differential equation using Laplace transform.
Taking the Laplace transform of both sides of the equation
[tex]s^2 Y(s) + 36 Y(s) = e^{-3s}[/tex]
[tex]Y(s) = e^{-3s} / (s^2 + 36)[/tex]
Partial fraction decomposition of Y(s)
[tex]Y(s) = e^{-3s} / (s^2 + 36) = (1/6) * (1/(s+6)) - (1/6) * (1/(s-6)) * e^{-3s}[/tex]
Take the inverse Laplace transform
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}) * u(t-3)[/tex]
where u(t) is the unit step function.
For t < 3, the unit step function is 0
y(t) = 0.
For t ≥ 3, the unit step function is 1
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex]
Therefore, the solution to the differential equation is
y(t) = 0, for t < 3
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}),[/tex] for t ≥ 3
Learn more on differential equation on https://brainly.com/question/28099315
#SPJ4
Determine whether the sequence converges or diverges. an = n²e-5n lim an = n→[infinity] Need Help? Read It
The sequence given by an = n²e^(-5n) is a product of two terms, n² and e^(-5n). To determine whether the sequence converges or diverges, we need to evaluate the limit of the sequence as n approaches infinity. By applying the limit rules, we can simplify the expression and determine the behavior of the sequence.
To evaluate the limit of the sequence as n approaches infinity, we can rewrite the expression as an = n²e^(-5n) = n² / e^(5n). As n approaches infinity, the exponential term e^(5n) grows much faster than the polynomial term n². This is because the exponential function grows exponentially, while the polynomial function grows only as a power of n. Therefore, as n gets larger, the denominator e^(5n) dominates the numerator n², causing the sequence to approach zero.
In mathematical terms, we can express this by taking the limit as n approaches infinity: lim(n→∞) n² / e^(5n) = 0. This means that the sequence an = n²e^(-5n) converges to zero as n goes to infinity.
Learn more about limit here : brainly.com/question/12211820
#SPJ11
The sequence given by an = n²e^(-5n) is a product of two terms, n² and e^(-5n). The sequence an = n²e^(-5n) converges to zero as n goes to infinity.
To determine whether the sequence converges or diverges, we need to evaluate the limit of the sequence as n approaches infinity. By applying the limit rules, we can simplify the expression and determine the behavior of the sequence.
To evaluate the limit of the sequence as n approaches infinity, we can rewrite the expression as an = n²e^(-5n) = n² / e^(5n). As n approaches infinity, the exponential term e^(5n) grows much faster than the polynomial term n². This is because the exponential function grows exponentially, while the polynomial function grows only as a power of n. Therefore, as n gets larger, the denominator e^(5n) dominates the numerator n², causing the sequence to approach zero.
In mathematical terms, we can express this by taking the limit as n approaches infinity: lim(n→∞) n² / e^(5n) = 0. This means that the sequence an = n²e^(-5n) converges to zero as n goes to infinity.
Learn more about limit here : brainly.com/question/12211820
#SPJ11
6. Which characteristics correctly describe a proton? a) approximate mass 1 amu; charge +1; inside nucleus b) approximate mass 5 x 104 amu; charge -1; outside nucleus c) aproximate mass 5 x 104 amu; charge +1; inside nucleus d) approximate mass 1 amu; charge 0; inside nucleus e) approximate mass 1 amu; charge +1; outside nucleus
The correct characteristic that describes a proton is: a) approximate mass 1 amu; charge +1; inside nucleus.
A proton is a subatomic particle with a positive charge and a mass of approximately 1 atomic mass unit (amu). It is located inside the nucleus of an atom. Protons are fundamental particles found in all atomic nuclei and play a crucial role in determining the atomic number and identity of an element. Their positive charge balances the negative charge of electrons, creating a neutral atom.
To know more about nucleus,
https://brainly.com/question/25663043
#SPJ11
Instructions: Use the given interpretations to translate the following arguments written in predicate logic into natural, English sentences. Ax: "x is an athlete" Bx: " x is brawny" Cx: "x is a champion"
m: "Mary"
g: "Gail" n: "Ned" 1.a. (x)(Ax⊃Bx) b. Am ∙An. /Bm∙Bn 2.a(x)(Ax⊃Bx) b.(x)(Bx⊃Cx)/(x)(Ax⊃Cx)
1.a. For all x, if x is an athlete, then x is brawny.
b. Mary is an athlete and Ned is an athlete. Therefore, Mary is brawny and Ned is brawny.
2.a. For all x, if x is an athlete, then x is brawny.
b. For all x, if x is brawny, then x is a champion. Therefore, for all x, if x is an athlete, then x is a champion.
1.a. The first argument states that if something is an athlete, then it is brawny. This can be understood as a general statement about athletes and their physical attributes.
b. The second part of the argument introduces specific individuals, Mary and Ned, and states that both of them are athletes. Therefore, based on the premise from part a, it can be concluded that Mary is brawny and Ned is brawny.
2.a. The first argument is similar to the previous one, stating that if something is an athlete, then it is brawny.
b. The second part of the argument introduces a new premise, stating that if something is brawny, then it is a champion. Based on this premise, and using the transitive property of implication, it can be concluded that if something is an athlete, then it is a champion.
Learn more about:all x
brainly.com/question/32267629
#SPJ11
What is the final volume V₂ in milliliters when 0.824 L of a 43.8 % (m/v) solution is diluted to 22.2 % (m/v)?
To find the final volume V₂ in milliliters, use the dilution equation with initial concentrations 43.8% and 22.2%, and solve for V₂ by dividing both sides by 0.222.
To find the final volume V₂ in milliliters when a solution is diluted, we can use the equation for dilution:
C₁V₁ = C₂V₂
Where C₁ is the initial concentration, V₁ is the initial volume, C₂ is the final concentration, and V₂ is the final volume.
Given:
C₁ = 43.8% (m/v)
V₁ = 0.824 L
C₂ = 22.2% (m/v)
We need to find V₂.
First, let's convert the initial and final concentrations to decimal form:
C₁ = 43.8% = 0.438
C₂ = 22.2% = 0.222
Now we can substitute the values into the dilution equation:
0.438 * 0.824 = 0.222 * V₂
Solving for V₂:
0.360312 = 0.222 * V₂
Dividing both sides by 0.222:
V₂ = 0.360312 / 0.222
V₂ ≈ 1.625 L
Since the question asks for the volume in milliliters, we need to convert liters to milliliters:
1 L = 1000 mL
So, V₂ ≈ 1.625 * 1000 = 1625 mL
Therefore, the final volume V₂ is approximately 1625 milliliters.
To know more about dilution equation Visit:
https://brainly.com/question/29361339
#SPJ11
Morgan secured a 6-year car lease at 5.60% compounded annually that required her to make payments of $889.72 at the beginning of each month. Calculate the cost of the car if she made a downpayment of $3,500. Round to the nearest cent
The cost of the car, rounded to the nearest cent, is $54,759.33.
To calculate the cost of the car, we need to consider the monthly payments and the down payment made by Morgan.
First, let's calculate the total amount paid over the 6-year lease. Morgan makes monthly payments of $889.72 for 6 years, which is a total of 6 x 12 = 72 payments.
To find the future value of these payments, we can use the formula for the future value of an ordinary annuity:
FV = PMT x [(1 + r)^n - 1] / r,
where FV is the future value, PMT is the monthly payment, r is the interest rate per compounding period, and n is the number of compounding periods.
In this case, the monthly payment PMT is $889.72, the interest rate r is 5.60% (or 0.056 as a decimal), and the number of compounding periods n is 72 (6 years x 12 months).
Let's calculate the future value:
FV = $889.72 x [(1 + 0.056)^72 - 1] / 0.056
Calculating this using a calculator or spreadsheet, the future value is approximately $58,259.33.
Now, let's subtract the down payment of $3,500 from the future value:
Cost of the car = Future value - Down payment
= $58,259.33 - $3,500
= $54,759.33
Learn more about future value here: https://brainly.com/question/30390035
#SPJ11
1.35 mol sample of methane gas at a temperature of 25.0°C is found to occupy a volume of 29.7 liters. The pressure of this gas sample is ________mmHg.
The pressure of the methane gas sample at a temperature of 25.0°C and a volume of 29.7 liters is approximately 1410.4 mmHg.
To calculate the pressure of a methane gas sample, we can use the ideal gas law equation PV = nRT, where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the universal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.
Given:
Number of moles (n) = 1.35 mol
Volume (V) = 29.7 L
Temperature (T) = 25.0°C = 25.0 + 273.15 = 298.15 K
We can rearrange the ideal gas law equation to solve for pressure:
P = (nRT) / V
Substituting the given values:
P = (1.35 mol x 0.08206 L atm/mol K x 298.15 K) / 29.7 L
Calculating this expression gives:
P ≈ 1410.4 mmHg (rounded to one decimal place)
Learn more about temperature
https://brainly.com/question/7510619
#SPJ11
Use the convolution theorem to obtain a formula for the solution to the given initial value problem, where g(t) is piecewise continuous on (0,00) and of exponential order. y' +4y=g(t): y(0)=0, y'(0)=5
To solve the given initial value problem, we can use the convolution theorem. The convolution theorem states that if we have a linear constant coefficient ordinary differential equation of the form y' + ay = g(t), where a is a constant and g(t) is a function, then the solution y(t) can be found by convolving the function g(t) with the impulse response h(t) of the differential equation.
In this case, we have the equation y' + 4y = g(t) with the initial conditions y(0) = 0 and y'(0) = 5. To find the solution, we need to determine the impulse response h(t) and then convolve it with the function g(t).
The impulse response h(t) can be found by solving the homogeneous equation y' + 4y = 0. The characteristic equation is r + 4 = 0, which has a root r = -4. Therefore, the general solution of the homogeneous equation is y_h(t) = C*e^(-4t), where C is a constant.
To find the particular solution y_p(t), we need to convolve g(t) with the impulse response h(t). The convolution integral is given by:
y_p(t) = ∫[0 to t] g(t-u) * h(u) du
Here, g(t-u) represents the time reversal of g(t) and h(u) represents the impulse response.
After obtaining the particular solution y_p(t), we can find the complete solution y(t) by adding the homogeneous solution and the particular solution:
y(t) = y_h(t) + y_p(t)
By substituting the given initial conditions into the complete solution, we can find the values of the constants and obtain the final solution to the initial value problem.
Note: The given information states that g(t) is piecewise continuous on (0, ∞) and of exponential order. The convolution theorem can be used to solve this specific type of initial value problem, where the impulse response exists and the function g(t) satisfies the conditions mentioned.
To know more about "Homogeneous Equation": https://brainly.com/question/14926412
#SPJ11
What is the solution to the following system?
The solution to the following system is as follows;
X =0
y = 2
z = 5
How to determine the value of the given system?X+2y+z = 9 ----> equation 1
x-y+3z= 13 ------> equation 2
2z = 10 ------> equation 3
To solve for z;
2z = 10
make z the subject of formula;
z = 0/2 = 5
substitute z = 5 in equation 1
X+2y+5 = 9
X +2y = 9-5
X + 2y = 4
X = 4-2y
substitute X = 4-2y in equation 2
4-2y-y+3(5)= 13
4-3y+ 15 = 13
4-13+15 = 3y
6 = 3y
y = 6/3
= 2
substitute z = 5 and y = 2 into equation 2
x-y+3z= 13
X -2+15= 13
X = 13+2-15
= O
Learn more about quadratic equation here:
https://brainly.com/question/30164833
#SPJ1
Project X has an initial investment cost of $20.0 million. After 10 years it will have a salvage value of $2.0 million. This project will generate annual revenues of $5.5 million per year and will have an annual operating cost of $1.8 million. What is the internal rate of return of this investment, assuming a 10-year life of the project?
A. 8.5% .
B. 10.3 %. C 13.8%. D. 15.1%
Answer: The internal rate of return of this investment is 15.1%. The correct option is D.
Explanation:
Internal rate of return (IRR) is the discount rate that makes the net present value (NPV) of an investment zero. In other words, it is the rate at which the sum of all future cash flows (positive and negative) from an investment equals its initial cost. The IRR is also referred to as the discounted cash flow rate of return.
The formula for calculating IRR is:
Where: NPV = net present value
CFt = the cash flow in period t
r = the discount rate Project X has an initial investment cost of $20.0 million, an annual operating cost of $1.8 million, an annual revenue of $5.5 million, and a salvage value of $2.0 million after ten years.
Therefore, the total revenue over ten years will be:
Revenue = $5.5 million x 10 years = $55 million.
The total cost over ten years will be:
Cost = ($1.8 million + $20 million) x 10 years = $198 million.
The net cash flow (NCF) over ten years is:
NCF = Revenue – Cost + Salvage Value
= $55 million – $198 million + $2 million = -$141 million.
To calculate the IRR, we need to find the discount rate that makes the NPV of the investment equal to zero.
We can do this using a financial calculator or spreadsheet software. However, we can also use trial and error by trying different discount rates until we get an NPV close to zero.
Using this method, we find that the IRR of Project X is approximately 15.1%, which is closest to option D.
Therefore, the correct option is D. 15.1%.
To know more about investment, visit:
https://brainly.com/question/14921083
#SPJ11
Members of which class of biomolecules are the building blocks of proteins? a)núcleic acids b)glycerols amino acids c)fatty acids d)monosaccharides
The class of biomolecules which pertains to the building blocks of proteins are b) amino acids.
Amino acids are the building blocks of proteins. Proteins are large, complex molecules made up of chains of amino acids linked together by peptide bonds. There are 20 different types of amino acids that can be found in proteins, each with its own unique side chain. These side chains give each amino acid its specific properties and functions.
When amino acids are linked together in a specific sequence, they form polypeptides, which then fold into complex three-dimensional structures to become functional proteins. The sequence of amino acids in a protein is determined by the genetic code, which is encoded in DNA.
In summary, amino acids are the building blocks of proteins. They are linked together in a specific sequence to form polypeptides, which then fold into functional proteins. The sequence of amino acids is determined by the genetic code. Hence, the correct answer is Option B.
Learn more about Amino acids here: https://brainly.com/question/28362783
#SPJ11
Please help with the question,
will give a good rating for the correct answer.
Derive the Velocity equation of the piston from its position equation. In order to derive position use/learn product-rule, power rule, and chain-rule of calculus. This is a straight forward derivation
To derive the velocity equation of the piston from its position equation, differentiate the position equation with respect to time using the product rule, power rule, and chain rule of calculus.
Let's start with the position equation of the piston, denoted as x(t), where t represents time:
x(t) = f(t * g(t)
Here, f(t) and g(t) are differentiable functions of time.
The velocity equation is the derivative of the position equation with respect to time:
v(t) = d/dt [x(t)]
Using the product rule of differentiation, the derivative of the product of two functions is:
d/dt [f(t) * g(t)] = f'(t) * g(t) + f(t) * g'(t)
Now, let's apply the product rule to differentiate the position equation:
v(t) = d/dt [f(t) * g(t)]
= f'(t) * g(t) + f(t) * g'(t)
The derivative of f(t) with respect to time, denoted as f'(t), represents the rate of change of the first function. Similarly, g'(t) represents the rate of change of the second function.
The power rule states that if a function h(t) is of the form h(t) = t^n, where n is a constant, then its derivative is:
d/dt [t^n] = n * t^(n-1)
We can use the power rule to find the derivatives of f(t) and g(t) if they are in a simple form like t^n.
Finally, by substituting the derivatives of f(t) and g(t) into the velocity equation, we obtain the velocity equation of the piston in terms of f'(t) and g'(t):
v(t) = f'(t) * g(t) + f(t) * g'(t)
for such more question on velocity equation
https://brainly.com/question/80295
#SPJ8
The hydration of this molecule above would lead to two molecules. Which would be the major species? pentane pentan-1-ol pentan-2-ol pentan-1,2-diol propanoic acid and ethanol with heat and an acid catalyst will yield a ether ester amide amine
Hydration is the addition of water to an alkene or alkyne in the presence of a catalyst such as a mineral acid like sulfuric acid. This reaction is a reversible reaction, and in this case, it is an addition reaction. The hydration of pent-1-ene would produce two products pentan-1-ol and pentan-2-ol. Pentan-1-ol would be the major species.
Below is an explanation:The molecule pent-1-ene is an unsaturated hydrocarbon that has a double bond between the first and second carbon atom, as shown in the figure below.When pent-1-ene is hydrated in the presence of an acid catalyst and water, it would produce two molecules, pentan-1-ol, and pentan-2-ol. The reaction would proceed as shown below:The reaction is reversible; hence it can go forward or backward.
However, the forward reaction is more favored than the backward reaction. The major species that would be produced in this reaction is pentan-1-ol.The reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst would lead to the formation of an ester.
The reaction between the two compounds is shown below:Thus, the major product of the reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst is an ester.
For more information on Hydration visit:
brainly.com/question/30373695
#SPJ11
!!!!HELP ASAP!!!! 100 Points!!!
Ben went to the ice-cream shop and purchased one scoop of rocky road ice-cream (shaped like a cylinder) on a sugar cone (shaped like a cone). The diameter of the scoop was 2.5 in. and the height was 4.25 in. What is the exact volume of the composite figure (the scoop of ice-cream atop a sugar cone) rounded to the nearest hundreth?
Answer:
Step-by-step explanation:
To find the volume of the composite figure, we need to find the volumes of the half-sphere and the cylinder separately, and then add them together.
The volume of the half-sphere is given by the formula:
V_half_sphere = (2/3)πr^3
where r is the radius of the half-sphere. In this case, the radius is 3 cm, so we have:
V_half_sphere = (2/3)π(3)^3
V_half_sphere = (2/3)π(27)
V_half_sphere = 18π
The volume of the cylinder is given by the formula:
V_cylinder = πr^2h
where r is the radius of the base of the cylinder, h is the height of the cylinder. In this case, the radius is 3 cm and the height is 10 cm, so we have:
V_cylinder = π(3)^2(10)
V_cylinder = 90π
To find the volume of the composite figure, we add the volumes of the half-sphere and the cylinder:
V_composite = V_half_sphere + V_cylinder
V_composite = 18π + 90π
V_composite = 108π
Therefore, the exact volume of the composite figure is 108π cubic centimeters.