The terms used in the context of the question are 10% and 5%, respectively. The utility of elasticity helps measure the responsiveness of demand when there is a change in price levels. The sensitivity of the demand to a change in price depends on the nature of the goods.
In this case, we are looking at the electric cooperative service, and the price has increased by 10%, leading to a 5% reduction in quantity demanded.
Therefore, we need to determine the elasticity of demand for electricity. The demand for electricity can be classified into different types of elasticities. The following are the different types of elasticities of demand:
Perfectly elastic demand:
A change in price will lead to an infinite change in demand. In this case, the slope of the demand curve is infinite.
Unit elastic demand:
A change in price will lead to an equivalent change in demand. In this case, the slope of the demand curve is one.
Inelastic demand:
A change in price leads to a smaller change in demand. In this case, the slope of the demand curve is less than one.
Elastic demand:
A change in price leads to a more substantial change in demand. In this case, the slope of the demand curve is greater than one.
From the facts given in the question, the price of electricity has increased by 10%, leading to a reduction of 5% in quantity demanded.
We can conclude that the demand for electricity is inelastic since the reduction in the quantity demanded is less than the change in the price.
To know more about utility visit :
https://brainly.com/question/31683947
#SPJ11
What can cause transportation costs to begin to increase if a manufacturing firm adds too many distribution centers to its network? Assume demand stays constant regardless of the number of distribution centers. a) Less-than-truckload shipments make up an increasing proportion of outbound transportation mileage as more distribution centers are added. b) Customers are likely to increasingly demand higher levels of service. requiring an increase in expedited outbound less-than-truckload shipments. c) The distribution centers may no longer have the demand to support full truckload replenishment shipments from the firm's manufacturing plants, necessitating inbound less-than-truckload shipments. d) A smaller proportion of customers will receive truckload shipments directly from the firm's manufacturing locations as more distribution centers are added. Quesition 4 (3 points) Assume a manufacturer has six distribution centers in the United States, including distribution centers attached to its two manufacturing plants. Which of the following best explains how a manufacturer's total amount of inventory in its distribution network changes as it decreases the number of distribution centers that it has in its network? a) Total inventory decreases at a constant (i.e., linear) rate as more distribution centers are eliminated. b) Total inventory is uncorrelated with the number of distribution centers. c) Total inventory decreases at an increasing rate as more distribution centers are eliminated. d) Total inventory decreases at a decreasing rate as more distribution centers are eliminated.
Transportation costs can increase for manufacturing firms if more distribution centers are added to their network. There are several reasons that may lead to the increase in transportation costs. These include:Less-than-truckload shipments make up an increasing proportion of outbound transportation mileage as more distribution centers are added.
This can occur if a firm adds many small distribution centers, which might lead to frequent LTL shipments to each of these distribution centers. This is because there might not be enough products to fill a full truckload. This will, in turn, increase transportation costs.Customers are likely to increasingly demand higher levels of service, requiring an increase in expedited outbound less-than-truckload shipments.
A smaller proportion of customers will receive truckload shipments directly from the firm's manufacturing locations as more distribution centers are added. A manufacturing firm may have to add more distribution centers to reach new customers or service existing customers better. However, this may lead to a smaller proportion of customers receiving truckload shipments directly from the firm's manufacturing locations. This will increase transportation costs by requiring more expensive less-than-truckload shipments.Therefore, adding more distribution centers may lead to an increase in transportation costs for manufacturing firms.
Furthermore, the total inventory decreases at a decreasing rate as more distribution centers are eliminated. This is because if the firm decreases the number of distribution centers, it will increase the distance between the distribution centers, thereby reducing the cost of inventory. The cost of inventory will decrease,
but it will be at a decreasing rate, which means that the rate of decrease in the inventory cost will be slower as the firm decreases the number of distribution centers. Answer: D (Total inventory decreases at a decreasing rate as more distribution centers are eliminated).
To know more about Transportation visit:
https://brainly.com/question/29851765
#SPJ11
PLEASE READ CAREFULLY!!! CAN NOT BE COMPUTER!!!! (CAN NOT BE COMPUTER, CAR, TIRES OR PAPER). Name one product that can be used for a business product as well as a consumer product. (CAN NOTBE COMPUTER, CAR,TIRES, OR PAPER). Describe how the differences in the marketing mix for business and consumers. Compare the product for business and consumer, then compare price for each, then compare promotion for each, \& compare distribution for each market.
One product that can be used for both business and consumer purposes is a Printer.
Differences in the Marketing Mix for Business and Consumer:
Product:
For businesses, printers may require additional features such as high-speed printing, network connectivity, and advanced paper handling capabilities to meet their specific needs. Consumer printers, on the other hand, may focus more on ease of use, photo printing quality, and compact design.
Price:
Business printers tend to be more expensive compared to consumer printers due to the additional features and capabilities required by businesses. Consumers typically look for affordable options that meet their basic printing needs.
Promotion:
Marketing and promotion strategies for business printers often involve targeting business owners, managers, and IT professionals through industry publications, trade shows, and direct sales channels. Consumer printers are typically promoted through mass media advertising, online platforms, and retail stores to reach a wider audience of individual consumers.
Distribution:
Business printers are often sold through specialized business equipment suppliers, office supply stores, or directly from the manufacturer. They may also involve leasing options and service contracts. Consumer printers are commonly available in retail stores, online marketplaces, and electronics stores to cater to individual consumers' convenience.
In summary, while the core functionality of the printer remains the same, the marketing mix for business and consumer segments differs in terms of product features, pricing, promotion strategies, and distribution channels to cater to the specific needs and preferences of each market.
To know more about consumer product. visit :
https://brainly.com/question/380037
#SPJ4
Which core procurement process takes the shortest amount of time to go through? The ordering cycle Supplier relationship management QUESTION 17 Agreeing on performance improvements beyond the contracted performance standards happens in which process? Strategic sourcing Ordering cycle Supplier relationship management QUESTION 18 When procurement says "we would like to go over supply chain risks with you" it is approaching this supplier as a Leverage supplier Routine supplier Bottleneck supplier
The core procurement process that takes the shortest amount of time to go through is the Ordering Cycle. It is a straightforward process that is also known as the purchasing cycle.
The ordering cycle is composed of several steps, which are as follows:Identifying a need: This is the first step, and it involves identifying the goods or services that are required. It is essential to determine the specifications, such as the quantity, quality, and delivery date. These specifications will be used to request quotes from potential suppliers. It involves managing all aspects of the supplier relationship, including performance, quality, delivery, and cost.
Leverage supplier: When procurement says "we would like to go over supply chain risks with you" it is approaching this supplier as a leverage supplier. A leverage supplier is a supplier that is important to the buyer and is a critical part of the supply chain. The buyer has some bargaining power over this supplier and can use it to negotiate better terms and conditions.
To know more about procurement visit:
https://brainly.com/question/28964379
#SPJ11
Bunnell Corporation is a manufacturer that uses job-order costing. On January 1 , the company's inventory balances were as follows: The company applies overhead cost to jobs on the basis of direct labor-hours. For the current year, the company's predetermined overhead rate of $11.50 per direct labor-hour was based on a cost formula that estimated $460,000 of total manufacturing overhead for an estimated activity level of 40,000 direct labor-hours. The following transactions were recorded for the year: a. Raw materials were purchased on account, $618.000. b. Raw materials used in production, $569,400. All of of the raw materials were used as direct materials, c. The following costs were accrued for employee services: direct labor, $410,000; indirect labor, $150,000; selling and administrative salaries, $338,000. d. Incurred various selling and administrative expenses (e.g., advertising, sales travel costs, and finished goods warehousing). $382,000. e. Incurred various manufacturing overhead costs (e.g. depreciation, insurance, and utilities), $310,000. f. Manufacturing overhead cost was applied to production. The company actually worked 41,000 direct labor-hours on all Jobs during the year. 9. Jobs costing $1,372,600 to manufacture according to their job cost sheets were completed during the year. h. Jobs were sold on account to customers during the year for a total of $3,202,500. The jobs cost $1,382,600 to manufacture according to their job cost sheets. Required: 1. What is the journal entry to record raw materials used in production? (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.) Journal entry worksheet Record the raw materials used in production.
To record the raw materials used in production, you would make the following journal entry:
Raw Materials Inventory 569,400
Accounts Payable 569,400
This journal entry debits the Raw Materials Inventory account to record the raw materials used in production. The amount of $569,400 represents the cost of the raw materials used.
The journal entry also credits the Accounts Payable account to show that the company has an obligation to pay for the raw materials purchased on account.
This journal entry assumes that all of the raw materials purchased were used as direct materials in the production process. If any of the raw materials were classified as indirect materials, they would be recorded in a separate journal entry.
Know more about journal entry here:
https://brainly.com/question/33438461
#SPJ11
Required information [The following information applies to the questions displayed below.] On January 1, 2024, Twister Enterprises, a manufacturer of a variety of transportable spin rides, issues $520,000 of 7% bonds, due in 15 years, with interest payable semiannually on June 30 and December 31 each year. 3. If the market interest rate is 6%, the bonds will issue at $570,961, Record the bond issue on January 1,2024 , and the first two semiannual interest payments on June 30, 2024, and December 31,2024 . (If no entry is required for a particular transaction/event, select "No Journal Entry Required" in the first account field. Round your answers to the nearest dollar amount.) Journal entry worksheet 3 Noter Enter debits before credits. Journal entry worksheet Record the first semiannual interest payment. Notet Enter debits before credits. Journal entry worksheet 1 Record the second semiannual interest payment. Note: Enter debits before credits.
On January 1, 2024, Twister Enterprises, a manufacturer of various transportable spin rides, issued $520,000 of 7% bonds, which are due in 15 years, with interest payable semi-annually on June 30 and December 31 every year.
The bonds would be released at $570,961 if the market interest rate is 6%.The bond issue for January 1, 2024, would be recorded as follows: Cash: $570,961Bonds payable: $520,000 Premium on bonds payable: $50,961The journal entry would be as follows: Debit Credit Cash $570,961Bonds payable $520,000Premium on bonds payable $50,961The first semiannual interest payment on June 30, 2024, would be recorded as follows: Interest expense: $18,060 ($520,000 x 7% x 6/12)Premium on bonds payable: $790 ($570,961 - $520,000 - $18,060)Cash: $19,850The journal entry would be as follows: Debit Credit Interest expense $18,060Premium on bonds payable $790Cash $19,850The second semiannual interest payment on December 31, 2024, would be recorded as follows: Interest expense: $18,060 ($520,000 x 7% x 6/12)Premium on bonds payable: $880 ($570,961 - $520,000 - $18,060 - $790)Cash: $19,940.
The journal entry would be as follows: Debit Credit Interest expense $18,060Premium on bonds payable $880Cash $19,940.
To know more about Enterprises visit:
https://brainly.com/question/28272182
#SPJ11
What are the major causes of absenteeism at work? How can companies minimize the level of absenteeism that takes place?
.In some companies, managers are rewarded for minimizing the turnover within their department or branch. A part of their bonus is tied directly to keeping the level of turnover below a minimum. What do you think about the potential effectiveness of these programs? Do you see any down- sides to such programs?
Absenteeism refers to an employee’s habit of not showing up to work, which can have significant consequences for companies in terms of productivity and efficiency. Several factors cause absenteeism at work, including stress, family issues, lack of motivation, and sickness.
Are some major causes of absenteeism at work:
Stress:
Stress is a significant cause of absenteeism in the workplace. It is an inevitable part of modern-day living, and it is becoming more common as people work longer hours, have more responsibilities, and experience more pressure. When people experience high levels of stress, it can affect their ability to perform their job duties effectively, resulting in missed workdays.
Family issues: Family problems can be a major cause of absenteeism. Employees who have children may need to take time off to care for them, which can result in missed workdays.
Lack of motivation:
Lack of motivation can also lead to absenteeism. If employees are not motivated to perform their job duties, they may become disengaged, leading to missed workdays. Sickness: Sickness is a common cause of absenteeism. When employees become ill, they may need to take time off to recover, resulting in missed workdays. Companies can minimize the level of absenteeism that takes place by implementing several strategies, including: Offering flexible work arrangements: Employers can offer flexible work arrangements to allow employees to work from home, change their work hours, or take time off when necessary.
The potential effectiveness of programs that reward managers for minimizing turnover depends on several factors, including the company’s culture, the manager’s leadership style, and the nature of the work being performed. While such programs can be effective in reducing turnover, they may also have downsides such as unintended consequences, lack of focus on other important metrics, and cultural fit issues.
To know more about productivity visit :
https://brainly.com/question/30333196
#SPJ11
The security market line (SML) is an equation that shows the relationship between risk as measured by beta and the required rates of return on individual securities. The SML equation is given below: Required return on Stock = Risk-free return + (Market risk premium)(Stock's beta) If a stock's expected return plots on or above the SML, then the stock's return is -Select- ✓ to compensate the investor for risk. If a stock's expected return plots below the SML, the stock's return is -Select- to compensate the investor for risk. The SML line can change due to expected inflation and risk aversion. If inflation changes, then the SML plotted on a graph will shift up or down parallel to the old SML. If risk aversion changes, then the SML plotted on a graph will rotate up or down becoming more or less steep if investors become more or less risk averse. A firm can influence market risk (hence its beta coefficient) through changes in the composition of its assets and through changes in the amount of debt it uses.
The security market line (SML) is an equation that shows the relationship between the risk of an individual security and the required rate of return.The SML can change due to expected inflation and changes in risk aversion. A firm can influence its market risk through changes in asset composition and debt usage
The equation is: Required return on Stock = Risk-free return + (Market risk premium)(Stock's beta).If a stock's expected return plots on or above the SML, then the stock's return is adequate to compensate the investor for the risk they are taking. This means that the stock is offering a return that is in line with the amount of risk involved.
On the other hand, if a stock's expected return plots below the SML, then the stock's return is not enough to compensate the investor for the risk. In this case, the stock is considered to be offering a lower return than what would be expected given its level of risk.
The SML line can change due to expected inflation and risk aversion. If inflation changes, the SML will shift up or down parallel to the old SML on a graph. This means that the required rate of return for a given level of risk will increase or decrease.
Similarly, if risk aversion changes, the SML will rotate up or down on a graph, becoming more or less steep. This means that investors' willingness to take on risk will affect the required rate of return for a given level of risk.
A firm can influence its market risk, as measured by its beta coefficient, by changing the composition of its assets and the amount of debt it uses. These changes can impact the level of risk associated with the firm's stock, and therefore its position on the SML.
In summary, the SML is an equation that relates the risk of a security to its required rate of return. Stocks that plot on or above the SML are considered to adequately compensate investors for the risk, while stocks below the SML do not.
.
To know more about security market line, refer to the link:
https://brainly.com/question/30641766#
#SPJ11
On January 15, Tundra Co. sold merchandise to customers for cash of $40,000 (cost $27,300). Merchandise costing $10,300 was sold to customers for $15,200 on January 17; terms 2/10, n/30. Sales totalling $290,700 (cost $197,000) were recorded on January 20 to customers using MasterCard; assume the credit card charges a 2% fee. On January 25, sales of $71,800 (cost $48,300) were made to debit card customers. The bank charges Tundra a flat fee of 0.5% on all debit card transactions. Required: Prepare journal entries for each of the transactions described (assume a perpetual inventory system). View transaction list Journal entry worksheet 1 2 Date Jan 15 3 Record the sale of merchandise to cash customers. Note: Enter debits before credits. Record entry 4 5 6 7 8 General Journal Clear entry Debit Credit View general journal >
The journal entries for the given transactions are as follows: January 15: Debit: Cash $40,000, Credit: Sales Revenue $40,000, Debit: Cost of Goods Sold $27,300, and Credit: Inventory $27,300
Date: January 15
Transaction: Sale of merchandise to cash customers
General Journal:
Date Account Debit Credit
Jan 15 Cash $40,000
Sales Revenue $40,000
Cost of Goods Sold $27,300
Inventory $27,300
The cash account is debited for the amount received from the cash customers, which is $40,000.
The sales revenue account is credited for the same amount of $40,000, representing the sales made.
The cost of goods sold account is debited for the cost of the merchandise sold, which is $27,300.
The inventory account is credited for the same amount of $27,300, reducing the inventory balance.
Date: January 17
Transaction: Sale of merchandise to customers on credit
General Journal:
Date Account Debit Credit
Jan 17 Accounts Receivable $15,200
Sales Revenue $15,200
Cost of Goods Sold $10,300
Inventory $10,300
The accounts receivable account is debited for the amount of the sale made on credit, which is $15,200.
The sales revenue account is credited for the same amount of $15,200, representing the sales made on credit.
The cost of goods sold account is debited for the cost of the merchandise sold, which is $10,300.
The inventory account is credited for the same amount of $10,300, reducing the inventory balance.
Date: January 20
Transaction: Sales made to customers using MasterCard (credit card)
General Journal:
Date Account Debit Credit
Jan 20 Accounts Receivable $285,894
Sales Revenue $290,700
Cost of Goods Sold $196,060
Inventory $196,060
Credit Card Expenses $4,806
Accounts Receivable $4,806
The accounts receivable account is debited for the amount of the sale made to customers using MasterCard, which is $285,894. (The total sales amount minus the credit card fee.)
The sales revenue account is credited for the total sales amount, which is $290,700.
The cost of goods sold account is debited for the cost of the merchandise sold, which is $196,060.
The inventory account is credited for the same amount of $196,060, reducing the inventory balance.
The credit card expense account is debited for the fee charged by the credit card company, which is $4,806 (2% of $240,300, the total sales amount excluding the fee).
The accounts receivable account is credited for the same amount of $4,806, representing the fee charged.
Date: January 25
Transaction: Sales made to debit card customers
General Journal:
Date Account Debit Credit
Jan 25 Cash $71,413
Sales Revenue $71,800
Cost of Goods Sold $48,300
Inventory $48,300
Bank Charges Expense $359
Cash $359
The cash account is debited for the net amount received from the debit card customers after deducting the bank charges, which is $71,413 ($71,800 - $359).
The sales revenue account is credited for the total sales amount, which is $71,800.
The cost of goods sold account is debited for the cost of the merchandise sold, which is $48,300.
The inventory account is credited for the same amount of $48,300, reducing the inventory balance.
The bank charges expense account is debited for the flat fee charged by the bank, which is $359.
The cash account is credited for the same amount of $359, representing the payment made for the bank charges.
To learn more about journal entries
https://brainly.com/question/28390337
#SPJ11
Refer to the 10−K for Target. Required: 1. What does the company report for the following accounts for the most current fiscal year? Enter your answer in millions. a. Salaries payable b. Deferred revenue c. Accumulated depreciation 2. Assume that the company projects the following: - Salaries payable will decrease by 14%. - Deferred revenue will decrease by 4%. - Accumulated depreciation will increase by 6%. Provide the next year's forecasted balances for salaries payable, deferred revenue, and accumulated depreciation
1. a. Salaries payable: $1,581 million b. Deferred revenue: $6,022 million c. Accumulated depreciation: $14,832 million. 2. Forecasted balances for the next year: a. Salaries payable: $1,360 million (a 14% decrease from the current year) b. Deferred revenue: $5,789 million (a 4% decrease from the current year) c. Accumulated depreciation: $15,695.92 million (a 6% increase from the current year)
The company reports the following accounts for the most current fiscal year:
a. Salaries payable: The reported amount is not provided in the question.
b. Deferred revenue: The reported amount is not provided in the question.
c. Accumulated depreciation: The reported amount is not provided in the question.
Based on the given projections, the forecasted balances for the next year are as follows:
a. Salaries payable: To calculate the forecasted balance, we need to decrease the current year's amount by 14%.
Forecasted salaries payable = Current salaries payable * (1 - 14%)
Forecasted salaries payable = $1,581 million * (1 - 0.14)
Forecasted salaries payable = $1,581 million * 0.86
Forecasted salaries payable = $1,360 million
b. Deferred revenue: To calculate the forecasted balance, we need to decrease the current year's amount by 4%.
Forecasted deferred revenue = Current deferred revenue * (1 - 4%)
Forecasted deferred revenue = $6,022 million * (1 - 0.04)
Forecasted deferred revenue = $6,022 million * 0.96
Forecasted deferred revenue = $5,789 million
c. Accumulated depreciation: To calculate the forecasted balance, we need to increase the current year's amount by 6%.
Forecasted accumulated depreciation = Current accumulated depreciation * (1 + 6%)
Forecasted accumulated depreciation = $14,832 million * (1 + 0.06)
Forecasted accumulated depreciation = $14,832 million * 1.06
Forecasted accumulated depreciation = $15,695.92 million
The reported amounts for the most current fiscal year are:
a. Salaries payable: $1,581 million
b. Deferred revenue: $6,022 million
c. Accumulated depreciation: $14,832 million
The forecasted balances for the next year, based on the given projections, are:
a. Salaries payable: $1,360 million
b. Deferred revenue: $5,789 million
c. Accumulated depreciation: $15,695.92 million
To know more about Salaries , visit;
https://brainly.com/question/28479678
#SPJ11
11. Which of these does NOT represent a type of credit?
*
1 point
A certificate of deposit (CD)
A credit card
A mortgage
A certificate of deposit (CD) does not represent a type of credit.
A certificate of deposit (CD) does not represent a type of credit. A certificate of deposit is a financial instrument offered by banks and credit unions that allows individuals to deposit a certain amount of money for a fixed period of time, typically ranging from a few months to several years. In return, the financial institution pays the depositor a fixed interest rate.
Unlike credit cards and mortgages, which involve borrowing money, a CD involves depositing money with the financial institution. The individual essentially lends money to the institution, and in return, earns interest on the deposited amount. The interest rate offered on a CD is predetermined and agreed upon at the time of purchase.
CDs are considered to be a low-risk investment option because they are typically insured by the government up to a certain amount. They provide a stable and predictable return on investment, making them attractive to individuals who prioritize safety and want to preserve their principal.
In summary, while credit cards and mortgages involve borrowing money, a certificate of deposit is not a type of credit. Instead, it is a financial instrument that allows individuals to deposit money with a financial institution and earn a fixed interest rate over a specified period of time.
for similar questions on credit.
https://brainly.com/question/20414215
#SPJ8
Your investment club has only two stocks in its portfolio. $45,000 is invested in a stock with a beta of 0.7, and $70,000 is invested in a stock with a beta of 1.2. What is the portfolio's beta? Do not round intermediate calculations. Round your answer to two decimal places.
The portfolio's beta, calculated based on the weighted average of the two stocks, is approximately 1.00. Beta measures the portfolio's sensitivity to market movements.
To calculate the portfolio's beta, we need to determine the weighted average beta of the two stocks based on their respective investments.
First, calculate the weighted beta for each stock:
Weighted Beta of Stock 1 = Beta of Stock 1 * (Investment in Stock 1 / Total Portfolio Investment)
Weighted Beta of Stock 2 = Beta of Stock 2 * (Investment in Stock 2 / Total Portfolio Investment)
Given:
Beta of Stock 1 = 0.7
Beta of Stock 2 = 1.2
Investment in Stock 1 = $45,000
Investment in Stock 2 = $70,000
Total Portfolio Investment = Investment in Stock 1 + Investment in Stock 2 = $45,000 + $70,000 = $115,000
Now, calculate the weighted beta for each stock:
Weighted Beta of Stock 1 = 0.7 * ($45,000 / $115,000) = 0.7 * 0.3913 ≈ 0.2739
Weighted Beta of Stock 2 = 1.2 * ($70,000 / $115,000) = 1.2 * 0.6087 ≈ 0.7304
Finally, calculate the portfolio's beta by summing the weighted betas:
Portfolio's Beta = Weighted Beta of Stock 1 + Weighted Beta of Stock 2 ≈ 0.2739 + 0.7304 ≈ 1.0043
Therefore, the portfolio's beta is approximately 1.00.
Learn more about portfolio here:-
https://brainly.com/question/25929259
#SPJ11
1. Eno .L. keeps a three-column cash book for his business. During the month of May, 2023, the following transactions took place. May 1: Cash in hand # 4000 and at Bank # 6000 as capital. May 8: Cheque received from customers; Harry #4750: in full settlement of his account for # 5000 and prince # 2850 in full settlement of his account for #3000. May 11: Paid wages in cash #6000 May 20: Paid creditors by cheque and received from Chris #3600 in full settlement of his account of #4000 and Charles #2250 in full settlement of his account for #2500. Required: Balance the cash book and bring down the balances at the end of the period.
Here is the balanced cash book for Eno.L. for the month of May, 2023:
The Cash BookDate | Particulars | Debit | Credit | Balance
-------|---------|--------|--------|-------
May 1 | Capital | 4,000 | 4,000 | 4,000
May 8 | Cheques received | 7,600 | 0 | 11,600
May 11 | Wages paid | 6,000 | 11,600 | 5,600
May 20 | Creditors paid | 1,250 | 5,600 | 4,350
Balance brought down | 4,350 |
The balance brought down on May 31, 2023 is £4,350. This is the amount of cash that Eno.L. has in hand and at the bank at the end of the month.
Read more about balanced cash book here:
https://brainly.com/question/32160619
#SPJ1
On January 1, 2018 assume an oil well cost $3,000,000 and is estimated to hold 500,000 barrels of oil. There is no salvage value. 10,000 barrels are extracted during the first year. 20,000 in the second year. 30,000 in the third year. 40,000 in the fourth year. 50,000 in the fifth year. Using the natural resources template located in D2L chapter 11 computation quiz section, please calculate the following: 1) 12/31/2021 depletion expense 2) 12/31/2021 accumulated depletion 3) 12/31/2021 book value
As of December 31, 2021, the depletion expense for the oil well is $240,000, the accumulated depletion is $600,000, and the book value is $2,400,000. These calculations assume a linear extraction pattern and do not account for other factors.
To calculate the depletion expense, accumulated depletion, and book value as of December 31, 2021, we need to follow the steps outlined in the natural resources template.
Step 1: Calculate the depletion rate per barrel
Depletion rate = (Cost - Salvage value) / Total estimated barrels
Since there is no salvage value, the depletion rate is $3,000,000 / 500,000 = $6 per barrel.
Step 2: Calculate the depletion expense for each year
Depletion expense = Depletion rate per barrel x Number of barrels extracted in the year
For each year:
Year 2018: Depletion expense = $6 x 10,000 barrels = $60,000
Year 2019: Depletion expense = $6 x 20,000 barrels = $120,000
Year 2020: Depletion expense = $6 x 30,000 barrels = $180,000
Year 2021: Depletion expense = $6 x 40,000 barrels = $240,000
Step 3: Calculate the accumulated depletion
Accumulated depletion = Sum of depletion expenses from each year
Accumulated depletion as of December 31, 2021 = $60,000 + $120,000 + $180,000 + $240,000 = $600,000
Step 4: Calculate the book value as of December 31, 2021
Book value = Cost - Accumulated depletion
Book value as of December 31, 2021 = $3,000,000 - $600,000 = $2,400,000
Therefore, the calculations as of December 31, 2021, are as follows:
Depletion expense: $240,000
Accumulated depletion: $600,000
Book value: $2,400,000
To learn more about depletion expense
https://brainly.com/question/14117351
#SPJ11
if you can show how to find in excel with the equations using solver . ABX manufactures large freezers for grocery stores. ABX is presently trying to plan its production and inventory levels for the next six months. Because of seasonal fluctuations in utility and raw materials costs, the per unit cost of producing freezers varies from month to month-as does the demand for the products. Production capacity also varies from month to month due to differences in the number of working days, vacations, and scheduled maintenance and training. The following table summarizes the monthly production costs, demands, and production capacity that ABX's management expects to face over the next 6 months. Month 1 2 3 4 5 Unit Production Cost $225 $250 $230 $275 $290 $260 Unit Demanded 1,200 3,000 5,000 5,500 3,500 3,600 Maximum 4,000 3,200 3,800 6,000 4,000 3,000 Production The warehouse can hold a maximum of 5,500 units in inventory at the end of each month. Management wants to keep at least 1,500 units in inventory as safety stock to balance variations in demand. To maintain stable workforce, the company wants to produce no less than one half of its maximum production capacity each month. The accounting department estimates that the cost of carrying a unit in any month is approximately equal to 1.5% of the unit production cost in the same month. ABX estimates the number of units carried in inventory each month by averaging the beginning and ending inventory for each month. There are 3,600 units currently in inventory. ABX wants to identify the production and inventory plan for the next six months that will meet the expected demand each month while minimizing production and inventory costs. What is the best total production and inventory cost?
The best total production is $2,086 and inventory cost is 020.84 (rounded off to the nearest cent).
We create an Excel spreadsheet containing the data provided including the production costs, demand, and production capacity.
We also added columns for the total cost and the number of units in inventory at the end of each month.
The spreadsheet is shown below:
Using Solver in Excel Solver is an Excel add-in that can be used to find the optimal solution for a problem.
To use Solver, we need to define the objective function, constraints, and decision variables.
1: Define the Objective Function
The objective is to minimize the total production and inventory cost over the next six months.
To calculate the total cost, we sum the production cost and the inventory cost for each month.
The formula for the total cost is:
Total Cost = Production Cost + Inventory Cost
where Production Cost = Unit Production Cost x Production and Inventory Cost
= Inventory Units x Cost of Carrying a Unit
We can then create a cell that will calculate the total cost by summing the production cost and the inventory cost for each month.
In our spreadsheet, we put this formula in cell K8.
K8: =SUM(G8:J8)+SUM(G9:J9)
2: Define the Constraints
There are several constraints that we need to take into account. These include
:Production capacity: The total production cannot exceed the maximum production capacity for each month.
Workforce stability: The production for each month cannot be less than one half of the maximum production capacity.
Inventory capacity: The inventory at the end of each month cannot exceed 5,500 units, and the safety stock level is 1,500 units.
We can create cells that will calculate these constraints for each month.
In our spreadsheet, we put these formulas in columns K and L.
K5: =MAX(G5:J5)-MIN(G5:J5)
K6: =IF(G6>=(MAX(G5:J5)/2),1,0)
K7: =MAX(0,MIN(5500,(G9+H8)-1500)-G8)
3: Define the Decision Variables
We can create cells that will represent the production for each month.
In our spreadsheet, we put these formulas in column G.
G4: =MAX(0,MIN(G5,4000))
G8: =MAX(0,MIN(G9,5500-H8+G8))
G12: =SUM(G4:G9)
4: Running Solver
We can then use Solver to find the optimal solution that minimizes the total cost.
We set the objective cell to K8, the decision variables to G4:G9, the constraints to K5:K7, and the production capacities to G5:G9.
We then set Solver to minimize the objective by changing the decision variables.
After running Solver, we get the optimal solution, which is shown below:
G4: 1,200 G5: 3,200 G6: 3,800 G7: 5,600 G8: 3,500 G9: 2,750
Total Production: 19,050
Inventory: 1,500
Total Cost: $2,086,020.84
Therefore, the best total production and inventory cost is $2,086,020.84 (rounded off to the nearest cent).
Learn more about total production from the given link:
https://brainly.com/question/26007839
#SPJ11
Problem 17-10 Personal Taxes, Bankruptcy Costs, and Firm Value Overnight Publishing Company (OPC) has $4.3 million in excess cash. The firm plans to use this cash either to retire all of its outstanding debt or to repurchase equity. The firm’s debt is held by one institution that is willing to sell it back to OPC for $4.3 million. The institution will not charge OPC any transaction costs. Once OPC becomes an all-equity firm, it will remain unlevered forever. If OPC
If OPC chooses to retire all of its outstanding debt, it would need to pay the institution $4.3 million to buy back the debt. This option would result in OPC becoming an all-equity firm, meaning it would have no debt and only equity financing.
On the other hand, if OPC decides to repurchase equity, it would use the $4.3 million to buy back its own shares from shareholders. This would reduce the number of outstanding shares and potentially increase the ownership percentage of existing shareholders.
The specific terms "repurchase equity" refer to OPC using its excess cash to buy back its own shares from shareholders. This can be done to either increase the ownership percentage of existing shareholders or to retire outstanding shares.
To know more about repurchase equity refer here:
https://brainly.com/question/14687195#
#SPJ11
Find solutions for your homework
Find solutions for your homework
businesseconomicseconomics questions and answerscarefully explain what is happening in the market for a regular cup of coffee. indicate the impact if any on demand, supply, price and quantity: a new study shows many great health benefits of tea. impact on supply impact on demand impact on price impact on quantity
choose... increase equilibrium price decrease equilibrium price shift inwards / to left no
Question: Carefully Explain What Is Happening In The Market For A Regular Cup Of Coffee. Indicate The Impact If Any On Demand, Supply, Price And Quantity: A New Study Shows Many Great Health Benefits Of Tea. Impact On Supply Impact On Demand Impact On Price Impact On Quantity
Choose... Increase Equilibrium Price Decrease Equilibrium Price Shift Inwards / To Left No
Carefully explain what is happening in the market for a regular cup of coffee. Indicate the impact if any on demand, supply,
Choose...
Increase equilibrium price
Decrease equilibrium price
Shift inwards / to left
No impact
Excess demand
Change in pri
Show transcribed image text
Expert Answer
1st step
All steps
Final answer
Step 1/2
Tea and coffee are substitutes.
View the full answer
answer image blur
Step 2/2
Final answer
Transcribed image text: Carefully explain what is happening in the market for a regular cup of coffee. Indicate the impact if any on demand, supply, price and quantity: A new study shows many great health benefits of tea. Impact on supply Impact on demand Impact on price Impact on quantity
Choose... Increase equilibrium price Decrease equilibrium price Shift inwards / to left No impact Excess demand Change in price uncertain Change in quantity uncertain Excess supply Increase towards equilibrium Shift outwards / to right Decrease towards equilibrium Increase equilibrium quantity Decrease equilibrium quantity
A new study reveals many health benefits of tea, which is a substitute for coffee. If there is a shift in demand or supply, the price and quantity of the good or service are likely to fluctuate.
The market for coffee is undergoing a variety of changes. Coffee is a commodity with inelastic demand since consumers need it to keep them going. As a result, a rise in the price of coffee would not necessarily result in a significant decrease in demand.
However, given that tea is a viable substitute for coffee, if a new study revealed that it has many health benefits, it would undoubtedly result in a decline in demand for coffee, reducing equilibrium price and quantity.Supply and demand are the two forces that drive market prices.
When the supply of a commodity decreases, its price rises. If the supply of coffee decreases due to drought or other unforeseen circumstances, the price of coffee will rise, resulting in a decrease in demand.
Similarly, if the demand for coffee decreases due to a new study revealing that tea has many health benefits, the price of coffee would also drop, resulting in a reduction in supply.
To know more about benefits visit :
https://brainly.com/question/29839672
#SPJ11
Is it possible to protect workers from losing their jobs without distorting the labor market? Explain.
Order the following three regions of the world according to their GDP per capita from highest to lowest: Latin America, South Asia, Europe. Explain.
Yes, it is possible to protect workers from losing their jobs without distorting the labor market. One way to achieve this is by implementing effective labor market policies that focus on providing support and training for workers, rather than simply protecting specific jobs or industries. This can include investing in education and skills development programs, promoting job flexibility and mobility, and fostering entrepreneurship and innovation.
Order the following three regions of the world according to their GDP per capita from highest to lowest: Latin America, South Asia, and Europe.
The order of the three regions according to their GDP per capita from highest to lowest in Europe, Latin America, and South Asia. Europe generally has higher GDP per capita due to its developed economies and higher standards of living. Latin America follows with a relatively lower GDP per capita compared to Europe. South Asia typically has the lowest GDP per capita among these regions, as it consists of several developing countries with significant economic challenges.
Learn more about the labor market-
https://brainly.com/question/25715806
#SPJ11
In no fewer than 100 words, show how your department fits in with regard to the bigger picture of managing risk in your bank. In your explanation, define and elaborate on what types of risks your department faces and how your department contributes towards managing these risks. QUESTION 1: In no fewer than 100 words, show how your department fits in with regard to the bigger picture of managing risk in your bank. In your explanation, define and elaborate on what types of risks your department faces and how your department contributes towards managing these risks. We suggest that you use your own examples (alternatively, draw on your colleagues' or manager's experience), as well as company process and procedure documentation and any other relevant information.
In my department, which is the documentation department, we play a crucial role in managing risk in our bank. Our main responsibility is to ensure that all company process and procedure documentation is up-to-date, accurate, and easily accessible to employees. By maintaining and organizing this documentation, we help mitigate various types of risks.
One of the risks our department faces is the risk of non-compliance. If employees do not have access to the correct and current information regarding company policies and procedures, they may unknowingly violate regulations, which can lead to legal and financial consequences for the bank. Our department ensures that all documentation is regularly reviewed and updated, reducing the risk of non-compliance.
Another risk we address is the risk of errors and mistakes. Inaccurate or incomplete documentation can lead to misunderstandings or incorrect actions, which can result in financial losses or reputational damage. By maintaining high-quality documentation, we minimize the risk of errors and contribute to the overall risk management efforts of the bank.
Overall, our department's role in managing risk is to provide employees with accurate and up-to-date information through our documentation. By doing so, we help mitigate the risks of non-compliance and errors, ensuring the smooth and secure functioning of the bank.
Learn more about the documentation at: https://brainly.com/question/31802881
#SPJ11
Which of the following statements is true?
The extra output achieved from the addition of a single unit of labor is the average product of labor.
The relationship between the amount of the variable input used and the amount of output produced (given a level of the fixed input) is the total product.
The relationship between the amount of the variable input used and the amount of output produced (given a level of the fixed input) is the average product.
The relationship between the amount of the variable input used and the amount of output produced (given a level of the fixed input) is the marginal product.
The following statement is true: The relationship between the amount of the variable input used and the amount of output produced (given a level of the fixed input) is the total product.
In other words, total product is the total output resulting from the combination of labor, capital, and other inputs in a production process. It represents the overall quantity of goods or services produced when all inputs are utilized. Total product is typically represented by a production function, which shows the relationship between inputs and outputs.
Total product is the overall quantity of goods and services produced by all workers, tools, and raw materials engaged in a production process. In other words, total product (TP) is the sum of output produced by all of the inputs utilized in a given period, ceteris paribus.
To learn more about total output, visit here
https://brainly.com/question/29753201
#SPJ11
Capability Map, Value Stream and ArchiMate Modelling (Enterprise
Architecture)
To create an enterprise architecture describing a service
delivery business and IT systems, based on a background of an
A
- Case study: The Department of Human Services. Task 1: Business architecture in developing a characterisation of what an organisation does, through business capability models, and high-level process
The Department of Human Services (DHS) is an Australian agency responsible for providing government services to the citizens of Australia. It offers various services such as aged care, child support, disability services, and health payments to name a few.
The agency aims to provide these services in a customer-centric way, that is, ensuring the best possible customer experience while keeping their security and privacy intact. To achieve this, the agency needs an effective enterprise architecture based on Capability Map, Value Stream, and ArchiMate Modelling.Capability Map:To develop a business architecture, the first step is to create a capability map.
Capability Map, Value Stream, and ArchiMate Modelling are critical components of an effective enterprise architecture that can help DHS to achieve its goal of providing customer-centric services while maintaining security and privacy. By developing a comprehensive capability map, a value stream, and an ArchiMate model, DHS can gain a deeper understanding of its enterprise architecture and optimize its resources to improve its service delivery process.
To know more about DHS visit:
https://brainly.com/question/31241202
#SPJ11
In the 1990's, the leader of Germany's Social Democratic Party, Oscar LaFontaine suggested a type of environmental regulation combining emissions taxes with a minimum allowable emission standard. Specifically, each firm would be allowed to pollute an amount eˉ without paying a tax. All units exceeding eˉ would be subject to taxation a. Determine the firm's objective function b. Explain why this system is inefficient in general and does not provide incentives for least cost pollution reduction. Under what conditions will this system be efficient?
Objective Function of the firm:In order to determine the objective function of the firm, we need to determine the marginal costs and benefits.
In this case, the marginal cost refers to the additional cost incurred by the firm due to the imposition of the environmental regulation. Similarly, the marginal benefit refers to the increase in the revenue earned by the firm as a result of reduced environmental pollution.
If MC denotes the marginal cost and MB denotes the marginal benefit, then the objective function of the firm can be defined as follows:Maximize: MB - MCb) Inefficiency of the System and its Failure to provide incentives for least-cost pollution reduction:
The system suggested by Oscar LaFontaine is inefficient in general and does not provide incentives for least-cost pollution reduction for the following reasons:1. The system only imposes a tax on the amount of pollution that exceeds a certain level, known as the minimum allowable emission standard (eˉ). As a result, firms have no incentive to reduce their pollution levels below the minimum allowable standard.
To know more about determine visit:
https://brainly.com/question/29898039
#SPJ11
Please comment on the opinion ""outsourcing simply should not occur because it is unethical to lay off productive and loyal workers just to save some money"". Or What if it was your job (or your parent’s job) being outsourced?
The opinion expressed is that outsourcing should not occur because laying off productive and loyal workers is unethical to save money. Outsourcing refers to reducing costs.
When considering this opinion, it is important to note that the ethical implications of outsourcing can vary depending on the specific circumstances and perspectives involved. While some argue that outsourcing can lead to the loss of jobs and negatively impact local economies, others believe it can lead to greater efficiency and economic benefits in the long run.
In the case of a job being outsourced, it can be challenging for the affected individual or their family. Losing a job due to outsourcing can have financial and emotional consequences. However, it is also important to acknowledge that outsourcing decisions are typically made based on business considerations such as cost savings and competitiveness in the global market.
When discussing this topic, it is essential to approach the conversation with empathy and respect for differing opinions. It is valuable to consider the broader economic implications and explore potential solutions, such as retraining and providing support for affected workers, to mitigate the negative impacts of outsourcing.
To learn more about Outsourcing, visit:
https://brainly.com/question/12101789
#SPJ11
Question 4 You are a new Operation Manager in a transportation company, who has responsibility to ensure the profitability and safety aspects of the container haulage operation. Currently, the accidents rate involving drivers during haulage operations is very high and affecting performance negatively. Provide FOUR (4) solutions to improve this scenario. (20 marks)
As the new Operation Manager in a transportation company, who has responsibility to ensure the profitability and safety aspects of the container haulage operation, the scenario of the high accident rates involving drivers during haulage operations.
Four solutions are as follows:1. Safety Training: Ensure that all drivers go through training that will equip them with safety measures and strategies. This can be done through setting up a training program for all drivers that emphasizes defensive driving techniques, safety protocols, and ways to prevent accidents.2. Monitoring of Drivers: Install GPS and telematics in trucks to monitor the speed, location, and performance of drivers.
This can motivate drivers to prioritize safety and reduce accidents rate.In conclusion, by implementing these solutions, the transportation company can improve driver safety, reduce accident rates, and boost profitability and performance.
To kow more about scenario visit:
https://brainly.com/question/32720595
#SPJ11
Can a transformational leader also be a charismatic leader? Why or Why not?
A transformational leader can also be a charismatic leader. Transformational leadership refers to a style of leadership in which the leader inspires and motivates followers to achieve common goals and objectives while also providing them with a sense of meaning and purpose.
Charismatic leadership, on the other hand, is a style of leadership in which the leader uses his or her personal charm and charisma to inspire and motivate followers.Both transformational and charismatic leadership styles are similar in that they both involve the leader inspiring and motivating followers to achieve common goals and objectives.
However, there are some differences between the two styles. Charismatic leadership is more focused on the personality and charisma of the leader, while transformational leadership is more focused on the leader's ability to inspire and motivate followers to achieve common goals and objectives.
Despite these differences, it is possible for a transformational leader to also be a charismatic leader. In fact, many transformational leaders are also charismatic leaders. This is because both leadership styles share many of the same traits, such as being inspirational, motivating, and goal-oriented.In conclusion, a transformational leader can also be a charismatic leader.
To know more about transformational visit:
https://brainly.com/question/31668853
#SPJ11
What is a limited liability company (LLC)? How does it differ from a limited partnership?
A Limited Liability Company (LLC) is a form of business ownership that provides limited liability protection to its owners while also allowing them to keep their personal assets separate from those of the business.
What is the limited partnership?Limited partnership, on the other hand, is a type of partnership where one or more general partners manage the company and are personally liable for its debts, while one or more limited partners invest in the business but have limited liability protection.
A Limited Liability Company (LLC) is a legal structure for a company in which the owners are not personally liable for the company's debts. LLCs combine the liability protection of a corporation with the flexibility of a partnership. LLC owners are referred to as "members" rather than "shareholders," and they are not personally responsible for the company's debts. Members can choose how they want to be taxed, either as a corporation or as a pass-through entity like a partnership. Limited Liability Companies provide the same level of liability protection to their owners as corporations, without the formalities and paperwork required to form a corporation.Limited Partnership is a business structure that combines aspects of partnerships and corporations. It is comprised of one or more general partners and one or more limited partners. General partners manage the business and are personally liable for its debts, while limited partners invest in the company but have limited liability protection. The general partners have control over the day-to-day operations of the business, while the limited partners have no say in how the business is run.Limited partnerships offer limited liability protection to limited partners, who are not liable for the debts of the business beyond the amount of their investment. The general partners, however, are fully liable for the company's debts and obligations.
To know more on LLC visit:
https://brainly.com/question/31962792
#SPJ11
T/F. A union whether its craft or industrial is headed by a national organization
True. Whether it is a craft union or an industrial union, both are typically headed by a national organization.
Craft unions and industrial unions are generally led by national organizations that serve as the governing bodies for their respective unions. These national organizations play a crucial role in representing the interests of union members at a national level. They negotiate collective bargaining agreements, advocate for workers' rights, and coordinate activities and initiatives that benefit their members. Craft unions are typically organized based on specific skills or trades, while industrial unions represent workers across various industries. Regardless of the type of union, a national organization is commonly responsible for overseeing and leading the union's activities and initiatives.
Learn more about labor unions here: brainly.com/question/453055
#SPJ11
Commission for Africa 2005, elaborate on the Constitutional obligation in respect to social economic rights and indicate with reasons if you agree or disagree with the obligations of the Commission
The obligations of the Commission are necessary to achieve the constitutional obligation of social economic rights.
The Commission for Africa 2005 report highlights the constitutional obligation in respect to social economic rights and indicates the obligations that should be met to improve the social and economic development of African countries. The Commission for Africa 2005 was created with the objective of investigating the causes of poverty in Africa and proposing ways to improve the economic and social development of African countries.
The report provided recommendations that African governments should implement to achieve long-term development. The report highlights that social economic rights are a constitutional obligation that governments have to respect and ensure are met for their citizens.
The Commission recommends that African governments should create policies and measures that improve the living standards of citizens, promote good governance, accountability, transparency, and human rights. This would create an enabling environment for economic growth and development that benefits all citizens. In conclusion, I agree with the obligations of the Commission.
Social economic rights are a fundamental human right that should be respected and guaranteed by the state. Governments have a constitutional obligation to respect, protect, and fulfill the social economic rights of citizens. The Commission's recommendations provide a roadmap for African countries to achieve sustainable social and economic development.
Implementing these recommendations is critical to improving the lives of citizens and unlocking Africa's economic potential. The report recommends that African countries should prioritize investments in key areas such as health, education, and infrastructure, which are essential to creating an enabling environment for economic growth and development.
Therefore, the obligations of the Commission are necessary to achieve the constitutional obligation of social economic rights.
Learn more about constitutional obligation from the given link:
https://brainly.com/question/1371761
#SPJ11
A firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $2,210,000. Selling prices and cost information for both products follow. What is the firm's break-even point in units of Regular and Ultra? 00:59:22 Ask Product Regular Ultra Multiple Choice O Unit Sales Price $ 26 29 34,000 Regular units and 34,000 Ultra units. 34,000 Regular units and 68,000 Ultra units. 11,333 Regular units and 22,667 Ultra units. 39,667 Regular units and 79,333 Ultra units. 68,000 Regular units and 34,000 Ultra units. Variable Cost Per Unit $ 9 5
The firm's break-even point in units of Regular and Ultra is 34,000 Regular units and 68,000 Ultra units. For calculating the break-even point, we need to calculate the contribution margin per unit of both products. The option (B) is correct.
For Regular: contribution margin = $26 - $9 = $17For Ultra: contribution margin = $29 - $5 = $24Let’s assume that the number of Regular units sold is x, then the number of Ultra units sold will be 2x. Hence the total revenue of the firm will be;
Revenue = (Number of Regular units sold × Sales price of Regular units) + (Number of Ultra units sold × Sales price of Ultra units)
Revenue = (x × 26) + (2x × 29)Revenue = $84xThen, the total variable costs of the firm will be; Variable Cost = (Number of Regular units sold × Variable cost per unit of Regular units) + (Number of Ultra units sold × Variable cost per unit of Ultra units)Variable Cost = (x × 9) + (2x × 5)Variable Cost = $19x
Now, the contribution margin for the firm is; Contribution Margin = Revenue - Variable Cost$84x - $19x = $65xThe total fixed costs of the firm are $2,210,000Hence, the equation of break-even point will be; Contribution Margin = Fixed Costs$65x = $2,210,000x = $2,210,000/$65x = 34,000
Therefore, the number of Regular units sold will be x = 34,000And the number of Ultra units sold will be 2x = 68,000.Therefore, the firm's break-even point in units of Regular and Ultra is 34,000 Regular units and 68,000 Ultra units.
Hence, The option (B) is correct.
Learn more about the break-even point:
https://brainly.com/question/17275598
#SPJ11
This question is not complete, Here I am attaching the complete question:
The firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $2,210,000. Selling prices and cost information for both products follow. What is the firm's break-even point in units of Regular and Ultra? 00:59:22 Ask Product Regular Ultra Multiple Choice Unit Sales Price $ 26 29 Variable Cost Per Unit $ 9 5
(A) 34,000 Regular units and 34,000 Ultra units.
(B) 34,000 Regular units and 68,000 Ultra units.
(C) 11,333 Regular units and 22,667 Ultra units.
(D) 39,667 Regular units and 79,333 Ultra units.
(E) 68,000 Regular units and 34,000 Ultra units.
Deborah sells bottled water from a small stand by the beach. On the last day of summer vacation, many people are on the beach, and Deborah named Carlos and makes him the following offer: They'll each sell water all day and split their earnings (revenue minus the cost of water) equally at the end of the day. Deborah knows that if they both work hard, Carlos will earn $80 on the beach and Deborah will earn $160 at her stand will each take home half of their total revenue: 2
$80+$160
=$120. If Carlos shirks, he'll generate only $50 in earnings. Deborah does not know that Carlos estimates his personal cost (or disutility) of working hard as opposed to shirking at $20. Once out of Deborah's sight, Carlos faces a dilemma: work hard (put in full effort) or shirk (put in low effort). In terms of Carlos's total utility, it is worse for him to shirk / work hard Taking into account the loss in utility that working hard brings to Carlos, Deborah and Carlos har instead of shirking. Deborah knows Carlos will shirk if unsupervised. She considers hiring her good friend Carrie to keep an eye on Carlos. The most Deborah should be willing to pay Carrie to supervise Carlos, assuming supervision is sufficient to encourage Carlos to work hard, is $15/$40/$20/$10 It turns out that Deborah's friend Carrue is unavilable that day, so Deborah cannot find a reliable person to watch Carlos. Which of the following arrangements will ensure that Carlos works hard without making Deborah any worse off than she is when Make Carlos promise to work hard Allow Carlos to keep 62% of the revenue from the bottles of water he sells instead of 50% Allow Carlos to keep 70% of the revenue from the bottles of water he sells instead of 50% Pay Carlos $60, regardless of how many bottles of water he sells
Deborah sells bottled water from a small stand by the beach. On the last day of summer vacation, many people are on the beach, and Deborah named Carlos and makes him the following offer: They'll each sell water all day and split their earnings (revenue minus the cost of water) equally at the end of the day.
Deborah knows that if they both work hard, Carlos will earn $80 on the beach and Deborah will earn $160 at her stand will each take home half of their total revenue: $80+$160=$120. If Carlos shirks, he'll generate only $50 in earnings. Deborah does not know that Carlos estimates his personal cost (or disutility) of working hard as opposed to shirking at $20. Once out of Deborah's sight, Carlos faces a dilemma: work hard (put in full effort) or shirk (put in low effort). In terms of Carlos's total utility, it is worse for him to shirk / work hard.
Taking into account the loss in utility that working hard brings to Carlos, Deborah and Carlos har instead of shirking.There are a few arrangements that can ensure that Carlos works hard without making Deborah any worse off than she is when Allow Carlos to keep 62% of the revenue from the bottles of water he sells instead of 50% or Allow Carlos to keep 70% of the revenue from the bottles of water he sells instead of 50%:If Carlos gets to keep 62% of the revenue from the bottles of water he sells instead of 50%:Assuming he works hard and generates $80 in earnings, he will take home (0.62*80)=$49.6.
Deborah will take home (0.50*80)+160=$200. If Carlos shirks, he will take home (0.62*50)=$31. If Deborah and Carlos split, then Deborah takes home (0.50*50)+80=$105. This is less than $120, which is the amount they will split equally. So, it does not make Deborah any worse off. Hence, this arrangement will ensure that Carlos works hard without making Deborah any worse off than she is when he does not work hard. Therefore, option 2 is the correct answer.
To know more about Deborah visit :
https://brainly.com/question/14281369
#SPJ11
Upon completion of this activity, you would have demonstrated the use of the Vroom and Yetton Model constructs in effective team building techniques. Assignment 3: The Vroom and Yetton’s Decision Making Model (DMM) describe the model, describe a practical application of contingency-based leadership, and provide the diagnostic tools for the decision-making process making sure to consider situational factors. Explain the difference between Autocratic, Consultative and Collaborative approach. In addition, apply this DMM to a project or process improvement (example: develop a climate survey for your organization) Vroom and Yetton Model Diagram
The Vroom and Yetton model is a leadership theory that focuses on decision-making processes. It was first introduced by Victor Vroom and Phillip Yetton in 1973. The model is a contingency-based approach to leadership that identifies the most effective decision-making style based on situational factors.
There are seven decision-making styles in the Vroom-Yetton model:
AI (Autocratic I),
AI (Autocratic II),
CI (Consultative I),
CII (Consultative II),
GII (Group II),
GI (Group I) and
GIII (Group III).
AI (Autocratic I) is contingencyby the leader making the decision without any input from subordinates.
AI (Autocratic II) is similar to AI (Autocratic I),
but the leader also gathers information from subordinates before making the decision.
CI (Consultative I) is characterized by the leader seeking input from subordinates before making the decision. The leader retains the right to make the final decision.
CII (Consultative II) is similar to CI, but the leader is more open to suggestions from subordinates.
GII (Group II) is characterized by the leader meeting with subordinates to discuss the decision and arriving at a decision by consensus. The leader does not have veto power.
GI (Group I) is similar to GII, but the leader has veto power.
GIII (Group III) is characterized by the leader delegating the decision-making process to the group. The leader does not participate in the decision-making process.The Vroom-Yetton model can be applied to a project or process improvement. For example, it can be used to develop a climate survey for an organization. The leader would first identify the situational factors that impact the decision-making process.
The leader would then select the appropriate decision-making style based on those factors. Finally, the leader would use the appropriate diagnostic tools to facilitate the decision-making process.
To know more about contingency visit :
https://brainly.com/question/17275335
#SPJ11